Bug 1229

Summary: usb keyboard keycodes screw up with tests after a while in X
Product: Drivers Reporter: mrmailer
Component: USBAssignee: Vojtech Pavlik (vojtech)
Status: REJECTED INSUFFICIENT_DATA    
Severity: high CC: greg, nacc
Priority: P2    
Hardware: i386   
OS: Linux   
Kernel Version: 2.6.4 Subsystem:
Regression: --- Bisected commit-id:

Description mrmailer 2003-09-13 20:49:40 UTC
After a while (in X?) all the lights on usb keyboard go on, and keycodes get
screwed up.  With test5, after returning to computer after a few hours, keyboard
doesn't respond at all.  Only fix is to unplug/replug usb keyboard
Comment 1 mrmailer 2003-09-13 20:57:55 UTC
Microsoft Natural keyboard pro
uhci host controller
Comment 2 mrmailer 2003-09-13 20:59:52 UTC
to appease people who love specifics, if it's not already obvious, saying "with
test3+" means it worked with test1 and test2.
Comment 3 mrmailer 2003-09-27 12:51:35 UTC
most of this may be exclusive to uhci driver.  when plugging in keyboard to hub
connected to ohci/ehci usb 2.0 card, the keyboard turns off after being away for
a length of time, but it no longer, when being used, seems to reset(all lights
flashing on) and keycodes don't get screwed up.
Comment 4 mrmailer 2003-09-29 20:55:46 UTC
well, all the lights just went on my keyboard, and the keycodes got screwed
up(this is plugged into the motherboard uhci), so it made it into test6.  great.
Comment 5 mrmailer 2003-09-29 21:04:54 UTC
with ohci, it still turns off, with test6.
Comment 6 mrmailer 2003-10-11 11:38:48 UTC
great, it made it into test7:(
Comment 7 mrmailer 2003-10-18 22:42:39 UTC
PLEASE PLEASE PLEASE!  This has made it into test 8 now!  I have inquired about
this on the usb list, but no response:(
Comment 8 mrmailer 2003-10-20 07:10:23 UTC
this appears to be what dmesg says re: it


several of these timeouts beforehand, and at the end, as you can see, I
unplug/replug to get it working again(this is with ohci port, which turns off
after a period of time, but my uhci card the lights go on/keyboard resets)
----
usb 4-2.3.1: control timeout on ep0in
usb 4-2.3.1: control timeout on ep0in
usb 4-2.3.1: control timeout on ep0in
usb 4-2.3.1: control timeout on ep0in
usb 4-2.3.1: control timeout on ep0in
usb 4-2.3.1: control timeout on ep0in
usb 4-2.3: USB disconnect, address 18
usb 4-2.3.1: USB disconnect, address 22
usb 4-2.3.3: USB disconnect, address 20
hub 4-2:1.0: new USB device on port 3, assigned address 23
hub 4-2.3:1.0: USB hub found
hub 4-2.3:1.0: 4 ports detected
hub 4-2.3:1.0: new USB device on port 1, assigned address 24
input: USB HID v1.10 Keyboard [Microsoft Natural Keyboard Pro] on
usb-0000:00:11.0-2.3.1
input: USB HID v1.10 Device [Microsoft Natural Keyboard Pro] on
usb-0000:00:11.0-2.3.1
hub 4-2.3:1.0: new USB device on port 3, assigned address 25
input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:11.0-2.3.3
Comment 9 mrmailer 2003-10-20 15:30:36 UTC
I determined also, my mouse which is plugged in through the keyboard acts
screwy... plugged into the regular port it works fine... this is yet another
problem with the keyboard driver with recent test kernels.
Comment 10 mrmailer 2003-10-20 19:41:16 UTC
scratch that mouse thing, apparently some other issue is happening with the test
kernels that's causing some mouse hanging even for optical mice.
Comment 11 Etienne LB 2003-10-22 12:48:34 UTC
With a Microsoft Internet keyboard pro, 2.6.0test8
The key * crashed the keyboard and flood the software.
After a while, with an USB webcam, all the USB components crashed.
The unplug/replug fix doesn't work...
Comment 12 mrmailer 2003-10-30 20:21:32 UTC
AND IT MAKES IT INTO TEST9, SHEESH!
Is there anything else I can do to report this?  It's a bug, it's a bug, it's a
bug, it was introduced several tests ago, and it's still here.
PLEASE
Comment 13 Daniel Chen 2003-11-08 01:50:23 UTC
Hi,
What motherboard chipset does this machine have?

Also, for the fellow whose '*' numkey "crashes the keyboard," could you reply
with the hex codes (see xev) when you depress and release it?
Comment 14 mrmailer 2003-11-08 13:07:01 UTC
I have a via, kt133 i believe.
but it has similar issues(except for all the lights coming on/keycode thing)
with my usb 2.0 pci card.
Comment 15 mrmailer 2003-11-25 02:10:55 UTC
IT REMAINS BROKEN IN TEST 10!  Sheesh, not 5 minutes into logging into X does
the keyboard turn off completely, until I plug it back in.
Comment 16 mrmailer 2003-11-30 00:41:15 UTC
Still in test 11!
Comment 17 mrmailer 2003-12-15 23:30:11 UTC
I booted to test2, same problem.  Apparently it's with the test releases, and
possibly just 2.6 period.
Comment 18 Greg Kroah-Hartman 2003-12-15 23:56:09 UTC
Can you enable CONFIG_USB_DEBUG and post what shows up in your kernel log when
the keyboard starts acting up?
Comment 19 Etienne LB 2003-12-18 05:56:16 UTC
Still in 2.6.0 ...

Here is my debug log :

$ less debug | grep 1-2

kernel: usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=3
kernel: usb 1-2: registering 1-2:1.0 (config #1, interface 0)
kernel: usblp 1-2:1.0: usb_probe_interface
kernel: usblp 1-2:1.0: usb_probe_interface - got id
kernel: usb 1-2: hcd_unlink_urb c17bdcc0 fail -22

$ less kern.log | grep usb
... (same lines as the debug log)
kernel: input: USB HID v1.10 Device [Microsoft Internet Keyboard Pro] on
usb-0000:00:07.2-1.1
kernel: drivers/usb/host/uhci-hcd.c: dc00: suspend_hc
kernel: usb 1-2: hcd_unlink_urb c17bdcc0 fail -22

And when I type the '*' numkey in a tty screen (not under a X session)
$ less kern.log | grep SAK
kernel: SAK: killed process 660 (bash): p->session==tty->session

then it log out...

If you want my log files, I can mail them to you.
If I can help... :)
Comment 20 Etienne LB 2003-12-18 07:35:17 UTC
I forgot to specify that it is not the '*' key of the numpad, but the '*' key
located beside the return key.

With wmodmap : this is the 'evil key' : (grrr)

KeyCode|   Keysym | (Keysym)| ...
Value  |   Value  | (Name)  | ...
---------------------------------------------------------------------------------
                           
51     | 0x002a |(asterisk) | 0x00b5 (mu) 0xfe50 (dead_grave) 0xfe55
(dead_breve)     
---------------------------------------------------------------------------------

Comment 21 mrmailer 2003-12-18 12:39:00 UTC
yeah, it most certainly is in 2.6.0 final.  I'll have to recompile with
usb_debug enabled, but it just happened, and I believe the kernel message
was(without debug enabled)
drivers/usb/input/hid-core.c: ctrl urb status -32 received


all the lights on the keyboard are on and the keycodes are screwed up.
Comment 22 mrmailer 2003-12-18 13:08:29 UTC
One temporary fix instead of unplugging/replugging is simply restarting hotplug
(in my case, /etc/rc.d/init.d/hotplug restart)
Comment 23 mrmailer 2004-01-17 00:05:26 UTC
still exists in 2.6.1.  All the lights come on the keyboard, or the keyboard
dies.  The software method to fix is to restart hotplug script.

Comment 24 mrmailer 2004-01-31 01:05:52 UTC
I noticed it also will happen on occasion with my laptop when i have msnatpro
plugged into it.  it seems either specific to msnatpro keyboards or to usb
keyboards in general, w/linux.
Comment 25 Vojtech Pavlik 2004-01-31 01:46:38 UTC
Ok, the "*" key problem should be fixed in 2.6.2.

But the keyboard dying and LEDs going on, etc, is most likely a hardware
problem. I hope you're not using an extension cord with the keyboard.
Comment 26 mrmailer 2004-02-01 08:26:48 UTC
no,not hardware.  it does it on two completely different msnatpro keyboards with
different machines.  both work fine in windows.
Comment 27 Vojtech Pavlik 2004-02-02 01:04:36 UTC
Please supply a log of the error with USB DEBUG enabled on 2.6.2-rc3 or
later. Without that it's nearly impossible to fix, because it's not happening
to me with any of my USB keyboards on none of my machines.
Comment 28 mrmailer 2004-02-04 16:02:41 UTC
well, when i got home, the keyboard was turned off(no lights, nothing, had to
unplug/replug).  here's a bunch of stuff from /var/log/messages
Feb  4 17:56:24 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:24 home kernel:
Feb  4 17:56:24 home kernel: [df97e2a0] link (1f97e1b2) element (19dee0c0)
Feb  4 17:56:24 home kernel:   0: [d9dee0c0] link (19dee100) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:56:24 home kernel:   1: [d9dee100] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:24 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:24 home kernel:
Feb  4 17:56:26 home kernel: [df97e390] link (1f97e1b2) element (19dee140)
Feb  4 17:56:26 home kernel:   0: [d9dee140] link (19dee300) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:56:26 home kernel:   1: [d9dee300] link (19dee340) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:26 home kernel:   2: [d9dee340] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:26 home kernel:
Feb  4 17:56:26 home kernel: [df97e2d0] link (1f97e1b2) element (19dee140)
Feb  4 17:56:26 home kernel:   0: [d9dee140] link (19dee180) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:56:26 home kernel:   1: [d9dee180] link (19dee1c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:26 home kernel:   2: [d9dee1c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:26 home kernel:
Feb  4 17:56:28 home kernel: [df97e2a0] link (1f97e1b2) element (19dee0c0)
Feb  4 17:56:28 home kernel:   0: [d9dee0c0] link (19dee100) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:56:28 home kernel:   1: [d9dee100] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:28 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:28 home kernel:
Feb  4 17:56:28 home kernel: [df97e270] link (1f97e1b2) element (19dee000)
Feb  4 17:56:28 home kernel:   0: [d9dee000] link (19dee040) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:56:28 home kernel:   1: [d9dee040] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:28 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:28 home kernel:
Feb  4 17:56:30 home kernel: [df97e270] link (1f97e1b2) element (19dee000)
Feb  4 17:56:30 home kernel:   0: [d9dee000] link (19dee040) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:56:30 home kernel:   1: [d9dee040] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:30 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:30 home kernel:
Feb  4 17:56:30 home kernel: [df97e2d0] link (1f97e1b2) element (19dee140)
Feb  4 17:56:30 home kernel:   0: [d9dee140] link (19dee280) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:56:30 home kernel:   1: [d9dee280] link (19dee2c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:30 home kernel:   2: [d9dee2c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:30 home kernel:
Feb  4 17:56:32 home kernel: [df97e2d0] link (1f97e1b2) element (19dee0c0)
Feb  4 17:56:32 home kernel:   0: [d9dee0c0] link (19dee180) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:56:32 home kernel:   1: [d9dee180] link (19dee1c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:32 home kernel:   2: [d9dee1c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:32 home kernel:
Feb  4 17:56:32 home kernel: [df97e2d0] link (1f97e1b2) element (19dee0c0)
Feb  4 17:56:32 home kernel:   0: [d9dee0c0] link (19dee180) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:56:32 home kernel:   1: [d9dee180] link (19dee1c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:32 home kernel:   2: [d9dee1c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:32 home kernel:
Feb  4 17:56:34 home kernel: [df97e270] link (1f97e1b2) element (19dee000)
Feb  4 17:56:34 home kernel:   0: [d9dee000] link (19dee040) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:56:34 home kernel:   1: [d9dee040] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:34 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:34 home kernel:
Feb  4 17:56:34 home kernel: [df97e2a0] link (1f97e1b2) element (19dee0c0)
Feb  4 17:56:34 home kernel:   0: [d9dee0c0] link (19dee100) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:56:34 home kernel:   1: [d9dee100] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:34 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:34 home kernel:
Feb  4 17:56:36 home kernel: [df97e2d0] link (1f97e1b2) element (19dee0c0)
Feb  4 17:56:36 home kernel:   0: [d9dee0c0] link (19dee100) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:56:36 home kernel:   1: [d9dee100] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:36 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:36 home kernel:
Feb  4 17:56:36 home kernel: [df97e2d0] link (1f97e1b2) element (19dee140)
Feb  4 17:56:36 home kernel:   0: [d9dee140] link (19dee180) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:56:36 home kernel:   1: [d9dee180] link (19dee1c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:36 home kernel:   2: [d9dee1c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:36 home kernel:
Feb  4 17:56:38 home kernel: [df97e330] link (1f97e1b2) element (19dee140)
Feb  4 17:56:38 home kernel:   0: [d9dee140] link (19dee180) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:56:38 home kernel:   1: [d9dee180] link (19dee1c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:38 home kernel:   2: [d9dee1c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:38 home kernel:
Feb  4 17:56:38 home kernel: [df97e270] link (1f97e1b2) element (19dee000)
Feb  4 17:56:38 home kernel:   0: [d9dee000] link (19dee040) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:56:38 home kernel:   1: [d9dee040] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:38 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:38 home kernel:
Feb  4 17:56:40 home kernel: [df97e2a0] link (1f97e1b2) element (19dee0c0)
Feb  4 17:56:40 home kernel:   0: [d9dee0c0] link (19dee100) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:56:40 home kernel:   1: [d9dee100] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:40 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:40 home kernel:
Feb  4 17:56:40 home kernel: [df97e2d0] link (1f97e1b2) element (19dee140)
Feb  4 17:56:40 home kernel:   0: [d9dee140] link (19dee280) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:56:40 home kernel:   1: [d9dee280] link (19dee2c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:40 home kernel:   2: [d9dee2c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:40 home kernel:
Feb  4 17:56:42 home kernel: [df97e2a0] link (1f97e1b2) element (19dee0c0)
Feb  4 17:56:42 home kernel:   0: [d9dee0c0] link (19dee100) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:56:42 home kernel:   1: [d9dee100] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:42 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:42 home kernel:
Feb  4 17:56:43 home kernel: [df97e2a0] link (1f97e1b2) element (19dee0c0)
Feb  4 17:56:43 home kernel:   0: [d9dee0c0] link (19dee100) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:56:43 home kernel:   1: [d9dee100] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:43 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:43 home kernel:
Feb  4 17:56:45 home kernel: [df97e270] link (1f97e1b2) element (19dee000)
Feb  4 17:56:45 home kernel:   0: [d9dee000] link (19dee040) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:56:45 home kernel:   1: [d9dee040] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:45 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:45 home kernel:
Feb  4 17:56:45 home kernel: [df97e2d0] link (1f97e1b2) element (19dee140)
Feb  4 17:56:45 home kernel:   0: [d9dee140] link (19dee180) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:56:45 home kernel:   1: [d9dee180] link (19dee1c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:45 home kernel:   2: [d9dee1c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:45 home kernel:
Feb  4 17:56:47 home kernel: [df97e2a0] link (1f97e1b2) element (19dee0c0)
Feb  4 17:56:47 home kernel:   0: [d9dee0c0] link (19dee100) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:56:47 home kernel:   1: [d9dee100] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:47 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:47 home kernel:
Feb  4 17:56:47 home kernel: [df97e270] link (1f97e1b2) element (19dee000)
Feb  4 17:56:47 home kernel:   0: [d9dee000] link (19dee040) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:56:47 home kernel:   1: [d9dee040] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:47 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:47 home kernel:
Feb  4 17:56:49 home kernel: [df97e2a0] link (1f97e1b2) element (19dee140)
Feb  4 17:56:49 home kernel:   0: [d9dee140] link (19dee280) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:56:49 home kernel:   1: [d9dee280] link (19dee2c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:49 home kernel:   2: [d9dee2c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:49 home kernel:
Feb  4 17:56:49 home kernel: [df97e2a0] link (1f97e1b2) element (19dee0c0)
Feb  4 17:56:49 home kernel:   0: [d9dee0c0] link (19dee100) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:56:49 home kernel:   1: [d9dee100] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:49 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:49 home kernel:
Feb  4 17:56:51 home kernel: [df97e2d0] link (1f97e1b2) element (19dee140)
Feb  4 17:56:51 home kernel:   0: [d9dee140] link (19dee180) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:56:51 home kernel:   1: [d9dee180] link (19dee1c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:51 home kernel:   2: [d9dee1c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:51 home kernel:
Feb  4 17:56:51 home kernel: [df97e2d0] link (1f97e1b2) element (19dee140)
Feb  4 17:56:51 home kernel:   0: [d9dee140] link (19dee180) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:56:51 home kernel:   1: [d9dee180] link (19dee1c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:51 home kernel:   2: [d9dee1c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:51 home kernel:
Feb  4 17:56:53 home kernel: [df97e2a0] link (1f97e1b2) element (19dee0c0)
Feb  4 17:56:53 home kernel:   0: [d9dee0c0] link (19dee100) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:56:53 home kernel:   1: [d9dee100] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:53 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:53 home kernel:
Feb  4 17:56:53 home kernel: [df97e270] link (1f97e1b2) element (19dee000)
Feb  4 17:56:53 home kernel:   0: [d9dee000] link (19dee040) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:56:53 home kernel:   1: [d9dee040] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:53 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:53 home kernel:
Feb  4 17:56:55 home kernel: [df97e2d0] link (1f97e1b2) element (19dee140)
Feb  4 17:56:55 home kernel:   0: [d9dee140] link (19dee280) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:56:55 home kernel:   1: [d9dee280] link (19dee2c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:55 home kernel:   2: [d9dee2c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:55 home kernel:
Feb  4 17:56:55 home kernel: [df97e270] link (1f97e1b2) element (19dee000)
Feb  4 17:56:55 home kernel:   0: [d9dee000] link (19dee040) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:56:55 home kernel:   1: [d9dee040] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:55 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:55 home kernel:
Feb  4 17:56:57 home kernel: [df97e2d0] link (1f97e1b2) element (19dee0c0)
Feb  4 17:56:57 home kernel:   0: [d9dee0c0] link (19dee180) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:56:57 home kernel:   1: [d9dee180] link (19dee1c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:57 home kernel:   2: [d9dee1c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:57 home kernel:
Feb  4 17:56:58 home kernel: [df97e2d0] link (1f97e1b2) element (19dee0c0)
Feb  4 17:56:58 home kernel:   0: [d9dee0c0] link (19dee180) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:56:58 home kernel:   1: [d9dee180] link (19dee1c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:58 home kernel:   2: [d9dee1c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:58 home kernel:
Feb  4 17:56:59 home kernel: [df97e2a0] link (1f97e1b2) element (19dee0c0)
Feb  4 17:56:59 home kernel:   0: [d9dee0c0] link (19dee100) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:56:59 home kernel:   1: [d9dee100] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:56:59 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:56:59 home kernel:
Feb  4 17:57:00 home kernel: [df97e2a0] link (1f97e1b2) element (19dee0c0)
Feb  4 17:57:00 home kernel:   0: [d9dee0c0] link (19dee100) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:57:00 home kernel:   1: [d9dee100] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:57:00 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:00 home kernel:
Feb  4 17:57:02 home kernel: [df97e2d0] link (1f97e1b2) element (19dee0c0)
Feb  4 17:57:02 home kernel:   0: [d9dee0c0] link (19dee180) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:57:02 home kernel:   1: [d9dee180] link (19dee1c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:57:02 home kernel:   2: [d9dee1c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:02 home kernel:
Feb  4 17:57:02 home kernel: [df97e2d0] link (1f97e1b2) element (19dee0c0)
Feb  4 17:57:02 home kernel:   0: [d9dee0c0] link (19dee180) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:57:02 home kernel:   1: [d9dee180] link (19dee1c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:57:02 home kernel:   2: [d9dee1c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:02 home kernel:
Feb  4 17:57:04 home kernel: [df97e270] link (1f97e1b2) element (19dee000)
Feb  4 17:57:04 home kernel:   0: [d9dee000] link (19dee040) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:57:04 home kernel:   1: [d9dee040] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:57:04 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:04 home kernel:
Feb  4 17:57:04 home kernel: [df97e2a0] link (1f97e1b2) element (19dee0c0)
Feb  4 17:57:04 home kernel:   0: [d9dee0c0] link (19dee100) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=183eac00)
Feb  4 17:57:04 home kernel:   1: [d9dee100] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:57:04 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:04 home kernel:
Feb  4 17:57:06 home kernel: [df97e270] link (1f97e1b2) element (19dee000)
Feb  4 17:57:06 home kernel:   0: [d9dee000] link (19dee080) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=142bc560)
Feb  4 17:57:06 home kernel:   1: [d9dee080] link (19dee100) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:57:06 home kernel:   2: [d9dee100] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:06 home kernel:
Feb  4 17:57:06 home kernel: [df97e2a0] link (1f97e1b2) element (19dee040)
Feb  4 17:57:06 home kernel:   0: [d9dee040] link (19dee0c0) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=142bc560)
Feb  4 17:57:06 home kernel:   1: [d9dee0c0] link (19dee100) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f621c0)
Feb  4 17:57:06 home kernel:   2: [d9dee100] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:06 home kernel:
Feb  4 17:57:08 home kernel: [df97e300] link (1f97e1b2) element (19dee100)
Feb  4 17:57:08 home kernel:   0: [d9dee100] link (19dee180) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:57:08 home kernel:   1: [d9dee180] link (19dee1c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f44ec0)
Feb  4 17:57:08 home kernel:   2: [d9dee1c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:08 home kernel:
Feb  4 17:57:08 home kernel: [df97e270] link (1f97e1b2) element (19dee000)
Feb  4 17:57:08 home kernel:   0: [d9dee000] link (19dee040) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:57:08 home kernel:   1: [d9dee040] link (19dee100) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f44ec0)
Feb  4 17:57:08 home kernel:   2: [d9dee100] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:08 home kernel:
Feb  4 17:57:10 home kernel: [df97e270] link (1f97e1b2) element (19dee000)
Feb  4 17:57:10 home kernel:   0: [d9dee000] link (19dee040) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=142bc560)
Feb  4 17:57:10 home kernel:   1: [d9dee040] link (19dee100) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f44ec0)
Feb  4 17:57:10 home kernel:   2: [d9dee100] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:10 home kernel:
Feb  4 17:57:10 home kernel: [df97e270] link (1f97e1b2) element (19dee000)
Feb  4 17:57:10 home kernel:   0: [d9dee000] link (19dee040) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=142bc560)
Feb  4 17:57:10 home kernel:   1: [d9dee040] link (19dee080) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f44ec0)
Feb  4 17:57:10 home kernel:   2: [d9dee080] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:10 home kernel:
Feb  4 17:57:12 home kernel: [df97e2a0] link (1f97e1b2) element (19dee080)
Feb  4 17:57:12 home kernel:   0: [d9dee080] link (19dee0c0) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=142bc560)
Feb  4 17:57:12 home kernel:   1: [d9dee0c0] link (19dee100) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f44ec0)
Feb  4 17:57:12 home kernel:   2: [d9dee100] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:12 home kernel:
Feb  4 17:57:12 home kernel: [df97e270] link (1f97e1b2) element (19dee000)
Feb  4 17:57:12 home kernel:   0: [d9dee000] link (19dee040) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=142bc560)
Feb  4 17:57:12 home kernel:   1: [d9dee040] link (19dee100) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f44ec0)
Feb  4 17:57:12 home kernel:   2: [d9dee100] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:12 home kernel:
Feb  4 17:57:14 home kernel: [df97e2a0] link (1f97e1b2) element (19dee100)
Feb  4 17:57:14 home kernel:   0: [d9dee100] link (19dee180) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:57:14 home kernel:   1: [d9dee180] link (19dee1c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f44ec0)
Feb  4 17:57:14 home kernel:   2: [d9dee1c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:14 home kernel:
Feb  4 17:57:14 home kernel: [df97e270] link (1f97e1b2) element (19dee000)
Feb  4 17:57:14 home kernel:   0: [d9dee000] link (19dee040) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:57:14 home kernel:   1: [d9dee040] link (19dee080) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f44ec0)
Feb  4 17:57:14 home kernel:   2: [d9dee080] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:14 home kernel:
Feb  4 17:57:16 home kernel: [df97e270] link (1f97e1b2) element (19dee000)
Feb  4 17:57:16 home kernel:   0: [d9dee000] link (19dee040) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=142bc560)
Feb  4 17:57:16 home kernel:   1: [d9dee040] link (19dee100) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f44ec0)
Feb  4 17:57:16 home kernel:   2: [d9dee100] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:16 home kernel:
Feb  4 17:57:16 home kernel: [df97e270] link (1f97e1b2) element (19dee000)
Feb  4 17:57:16 home kernel:   0: [d9dee000] link (19dee040) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=142bc560)
Feb  4 17:57:16 home kernel:   1: [d9dee040] link (19dee080) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f44ec0)
Feb  4 17:57:16 home kernel:   2: [d9dee080] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:16 home kernel:
Feb  4 17:57:18 home kernel: [df97e270] link (1f97e1b2) element (19dee000)
Feb  4 17:57:18 home kernel:   0: [d9dee000] link (19dee040) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:57:18 home kernel:   1: [d9dee040] link (19dee0c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f44ec0)
Feb  4 17:57:18 home kernel:   2: [d9dee0c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:18 home kernel:
Feb  4 17:57:18 home kernel: [df97e270] link (1f97e1b2) element (19dee000)
Feb  4 17:57:18 home kernel:   0: [d9dee000] link (19dee040) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:57:18 home kernel:   1: [d9dee040] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f44ec0)
Feb  4 17:57:18 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:18 home kernel:
Feb  4 17:57:20 home kernel: [df97e300] link (1f97e1b2) element (19dee140)
Feb  4 17:57:20 home kernel:   0: [d9dee140] link (19dee180) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=142bc560)
Feb  4 17:57:20 home kernel:   1: [d9dee180] link (19dee1c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f44ec0)
Feb  4 17:57:20 home kernel:   2: [d9dee1c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:20 home kernel:
Feb  4 17:57:20 home kernel: [df97e270] link (1f97e1b2) element (19dee000)
Feb  4 17:57:20 home kernel:   0: [d9dee000] link (19dee040) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=142bc560)
Feb  4 17:57:20 home kernel:   1: [d9dee040] link (19dee0c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f44ec0)
Feb  4 17:57:20 home kernel:   2: [d9dee0c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:20 home kernel:
Feb  4 17:57:22 home kernel: [df97e300] link (1f97e1b2) element (19dee140)
Feb  4 17:57:22 home kernel:   0: [d9dee140] link (19dee280) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:57:22 home kernel:   1: [d9dee280] link (19dee2c0) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f44ec0)
Feb  4 17:57:22 home kernel:   2: [d9dee2c0] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:22 home kernel:
Feb  4 17:57:22 home kernel: [df97e270] link (1f97e1b2) element (19dee000)
Feb  4 17:57:22 home kernel:   0: [d9dee000] link (19dee040) e0 LS Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=1fdc1600)
Feb  4 17:57:22 home kernel:   1: [d9dee040] link (19dee140) e3 SPD LS Active
Length=0 MaxLen=1 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=14f44ec0)
Feb  4 17:57:22 home kernel:   2: [d9dee140] link (00000001) e3 LS IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
Feb  4 17:57:22 home kernel:
Feb  4 17:57:23 home modprobe: FATAL: Module ide_probe_mod not found.
Feb  4 17:57:23 home modprobe: FATAL: Module ide_probe not found.
Feb  4 17:57:23 home kernel: usb 1-2.2: USB disconnect, address 5
Feb  4 17:57:23 home kernel: updfstab: numerical sysctl 1 23 is obsolete.
Feb  4 17:57:24 home modprobe: FATAL: Module ide_probe_mod not found.
Feb  4 17:57:24 home modprobe: FATAL: Module ide_probe not found.
Feb  4 17:57:24 home modprobe: FATAL: Module ide_probe_mod not found.
Feb  4 17:57:24 home modprobe: FATAL: Module ide_probe not found.
Feb  4 17:57:24 home kernel: usb 1-2: USB disconnect, address 3
Feb  4 17:57:24 home kernel: usb 1-2.1: USB disconnect, address 4
Feb  4 17:57:24 home modprobe: FATAL: Module ide_probe_mod not found.
Feb  4 17:57:24 home modprobe: FATAL: Module ide_probe not found.
Feb  4 17:57:24 home kernel: updfstab: numerical sysctl 1 23 is obsolete.
Feb  4 17:57:24 home last message repeated 2 times
Feb  4 17:57:25 home kernel: hub 1-0:1.0: new USB device on port 2, assigned
address 6
Feb  4 17:57:25 home kernel: hub 1-2:1.0: USB hub found
Feb  4 17:57:25 home kernel: hub 1-2:1.0: 4 ports detected
Feb  4 17:57:26 home kernel: hub 1-2:1.0: new USB device on port 1, assigned
address 7
Feb  4 17:57:26 home kernel: usb 1-2.1: Product: Microsoft Natural Keyboard Pro
Feb  4 17:57:26 home input.agent[3859]: ... no modules for INPUT product
Feb  4 17:57:26 home input.agent[3870]: ... no modules for INPUT product
3/45e/1d/114
Feb  4 17:57:26 home kernel: input: USB HID v1.10 Keyboard [Microsoft Natural
Keyboard Pro] on usb-0000:00:07.2-2.1
Feb  4 17:57:27 home input.agent[3903]: ... no modules for INPUT product
Feb  4 17:57:27 home kernel: input: USB HID v1.10 Device [Microsoft Natural
Keyboard Pro] on usb-0000:00:07.2-2.1
Feb  4 17:57:27 home kernel: hub 1-2:1.0: new USB device on port 2, assigned
address 8
Feb  4 17:57:27 home kernel: usb 1-2.2: Product: USB-PS/2 Optical Mouse
Feb  4 17:57:27 home kernel: usb 1-2.2: Manufacturer: Logitech
Feb  4 17:57:27 home input.agent[3960]: ... no modules for INPUT product
Feb  4 17:57:28 home kernel: input: USB HID v1.10 Mouse [Logitech USB-PS/2
Optical Mouse] on usb-0000:00:07.2-2.2
Feb  4 17:57:28 home input.agent[3971]: ... no modules for INPUT product
Feb  4 17:57:28 home input.agent[3982]: ... no modules for INPUT product
3/46d/c00e/1110
Comment 29 mrmailer 2004-02-04 16:05:59 UTC
all the lights just came up and the keycodes went screwy, but /var/log/messages
shows no change!
Comment 30 mrmailer 2004-02-28 02:45:30 UTC
still exists in 2.6.3.  all my lights just went on.
Comment 31 mrmailer 2004-03-21 08:37:40 UTC
it followed me to my new computer!  I even tried compiling usb modules into the
kernel, and sure enough, it still reset with all the lights on.
Comment 32 mrmailer 2004-03-28 13:59:27 UTC
i THINK it may be confined to X
Comment 33 mrmailer 2004-03-28 14:07:32 UTC
nevermind, i went to console f2, and same thing(all lights went on)
Comment 34 mrmailer 2004-03-30 10:55:21 UTC
so 
1.new computer
2.new linux installation
NOW new msnatpro keyboard

same bug.

I give up, I have received no help here or on USB list, despite offering to help
debug.  I'm just going to plug it into the ps/2 port.
Comment 35 Nishanth Aravamudan 2004-12-12 15:25:44 UTC
7 months later, 2.6.9/10 is available. Have you tried it again since you "gave up"?