Bug 11711

Summary: "Kernel reboots if Powersupply of the Laptop is connected or disconnected"
Product: Other Reporter: Thomas (SMA.TFG)
Component: OtherAssignee: other_other
Status: RESOLVED DUPLICATE    
Severity: high CC: alan, rui.zhang, SMA.TFG
Priority: P1    
Hardware: All   
OS: Linux   
Kernel Version: 2.6.27-rc7 / still in 2.6.28_rc8 Subsystem:
Regression: --- Bisected commit-id:
Bug Depends on: 12220    
Bug Blocks: 56331    
Attachments: dmsg2.6.28_rc5
Kernel Config for my 2.6.28_rc5
Acpi Dump 2.6.28_rc5

Description Thomas 2008-10-05 16:31:12 UTC
Latest working kernel version: none, 2.6.25 same Problem
Earliest failing kernel version: ?
Distribution: Gentoo Linux 2008.1 / vanilla-kernel umasked
Hardware Environment: Laptop details later
Software Environment: none at this Point nothing other loaded
Problem Description: System Crashes if PowerSupply is plugged or unplugged

Steps to reproduce: Plug or unplug Powersupply with full loaded Batteryes.
Works after kernel has finisted. The first part of the kernel isn't influenced. I think in the near of the SATA Drivers or Scheduler. I Kernel has a Problem to Sync VFS and Crashes, nothing happens if I unplug the PowerSupply (I know hard to find)

Kernel booted with following options
init=/bin/sh # Shoud exclude init for Errorfinding.

Kernel Config: (Disabled everything what was possible to reduce the possible Error parts)
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_NAMESPACES=y
CONFIG_SYSCTL=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_BLOCK=y
CONFIG_BLOCK_COMPAT=y

CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y

CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_PC=y
CONFIG_MCORE2=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HZ_300=y
CONFIG_HZ=300
CONFIG_PHYSICAL_START=0x200000
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y



CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y

CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y


CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_HAVE_IDE=y

CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y

CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y


CONFIG_SCSI_SPI_ATTRS=y
CONFIG_ATA=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
CONFIG_ATA_SFF=y
CONFIG_ATA_PIIX=y



CONFIG_INPUT=y

CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768

CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y

CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_LIBPS2=y

CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y

CONFIG_FIX_EARLYCON_MEM=y

CONFIG_UNIX98_PTYS=y
CONFIG_DEVPORT=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y

CONFIG_SSB_POSSIBLE=y

CONFIG_AGP=y
CONFIG_AGP_AMD64=y

CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y

CONFIG_FIRMWARE_MEMMAP=y

CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y



CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y


CONFIG_PARTITION_ADVANCED=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y

CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_FRAME_WARN=2048
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_EARLY_PRINTK=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
CONFIG_DEFAULT_IO_DELAY_TYPE=0

CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_HAVE_KVM=y

CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y


lspci:
00:00.0 Host bridge: Intel Corporation Device 2a40 (rev 07)
00:01.0 PCI bridge: Intel Corporation Device 2a41 (rev 07)
00:1a.0 USB Controller: Intel Corporation USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation PCI Express Port 1 (rev 03)
00:1c.2 PCI bridge: Intel Corporation PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corporation USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation Device 2919 (rev 03)
00:1f.2 SATA controller: Intel Corporation Mobile SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation Device 0649 (rev a1)
02:00.0 Network controller: Intel Corporation Device 4232
06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 13)

lsusb:
Bus 002 Device 001: ID 1d6b:0002
Bus 008 Device 002: ID 0a5c:2101 Broadcom Corp.
Bus 008 Device 001: ID 1d6b:0001
Bus 007 Device 002: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse
Bus 007 Device 001: ID 1d6b:0001
Bus 006 Device 001: ID 1d6b:0001
Bus 001 Device 002: ID 174f:5931
Bus 001 Device 001: ID 1d6b:0002
Bus 005 Device 001: ID 1d6b:0001
Bus 004 Device 001: ID 1d6b:0001
Bus 003 Device 001: ID 1d6b:0001
Comment 1 Thomas 2008-10-05 16:35:15 UTC
The Crash is done as a Reboot, this means, if you pull out the PowerSupply or Pull in the PowerSupply System reboots without something in the /var/log/messages.

If any further information is nedded feel free to contact me. May be its posible to give you an remote access on the Laptop.
Comment 2 Thomas 2008-10-05 16:38:37 UTC
Gentoo Forum entry
http://forums.gentoo.org/viewtopic-t-709556.html
Comment 3 Alan 2008-10-08 07:30:53 UTC
Fun fun. I assume it doesn't crash in Windows ?

Need to know what sort of laptop, and attaching a dmesg after boot would be good

What happens if you boot with

acpi=off init=/bin/sh

then fiddle with the power supply ?
Comment 4 Thomas 2008-10-08 12:57:20 UTC
Laptop Infos: (I`m sorry, that I can give you only the German details of the Laptop)

Samsung R560-Aura P8400 Madril

Modellbezeichnung  	
	NP-R560-AS05DE

Ausführung 	
	Deutsch

Farbe 	
	Schwarz (Hochglanz)

Prozessor 	
	
Bezeichnung 	Intel® Core 2 Duo P8400 (2,26 GHz)
Taktfrequenz 	2x 2266 MHz
Level 2 Cache 	2x 1536 KB
Bustakt 	1066 MHz (Quadpumped)
Bemerkung 	Penryn-3M - 45nm
max. Leistungsaufnahme 	25 Watt
Core Spannung 	1 Volt - 1,25 Volt
Bauform 	mFC-PGA
Sockel 	P

Arbeitsspeicher 	
	
vorhanden 	4096 MB
maximal 	4096 MB
SO-DIMM Slots 	2, bereits voll belegt
Typ 	DDR3-1066

Display 	
	
sichtbares Bild 	15,4 Zoll
Auflösung 	1280x800 Pixel
Seitenverhältnis 	16:10 Format
Typ 	Glare

Grafik 	
	
	
Grafikchip 	NVIDIA GeForce Go 9600M GT
Speicher 	512 MB vorhanden, zusätzlich bis zu 768 MB vom Arbeitsspeicher

Festplatte 	
	320 GB, 5400 U/min

Festplattendetails 	
	7Pin SATA

Optisches Laufwerk 	
	
Typ 	Intern CD/DVD
Formate (Lesen) 	CD-R, CD-RW, DVD-R, DVD-RW, DVD-R DL, DVD-RAM, DVD+R, DVD+RW, DVD+R DL
Formate (Schreiben) 	CD-R, CD-RW, DVD+R, DVD-R, DVD+RW, DVD-RW, DVD+R DL, DVD-R DL, DVD-RAM

CardReader 	
	SD, SDHC, MMC, MMCplus, xD, MS, MS PRO

Kamera 	
	1,3 Megapixel

Sound 	
	
Soundchip 	HD Audio Codec
Lautsprecher 	eingebaut
Typ 	2.0

Konnektivität 	
	10/100/1000 MBit/s, WLAN (300 MBit/s, IEEE 802.11a/b/g/n)

Eingabe 	
	
Tastatur 	Ja
Maustyp 	Touchpad

Schnittstellen 	
	
	3 x USB 2.0
	1 x RJ-45
	1 x HDMI
	1 x VGA
	1 x Line-Out
	1 x Mikrofon
	1 x Expresscard 54
	Bluetooth

Betriebssystem 	
	Windows Vista Home Premium (OEM)

Stromversorgung 	
	
Stromquelle 	Li-Ion Akku (6 Zellen)
Akku 	
Betrieb 	bis zu 3 Stunden

Gewicht 	
	2,7 kg

Abmessungen (BxHxT) 	
	358 mm x 28 mm x 264 mm

Zubehör 	
	Akku, Netzteil

=======================================

It reboots, this is a thing that I`ve tried a view times. I even excluded ACPI, because it was my first thougt, that this could be the problem.

dmesg is following.
Comment 5 Thomas 2008-10-08 13:02:35 UTC
Because of a Undefind Error in this HTML Pages I can't attach Files, so I post dmesg output as comment.

Directly pulled after booting the Laptop (Init Level 3 with XDM and my full Kernel, not the minimal Kernel. If you nedd dmesg with the Kernel Config above, I install this Config again and to a new dmesg).

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.27-rc7 (root@rechner1) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #16 SMP Mon Oct 6 03:13:20 CEST 2008
Command line: root=/dev/sda2 
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
 BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable)
 BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
 BIOS-e820: 00000000bf8a7000 - 00000000bf9bd000 (usable)
 BIOS-e820: 00000000bf9bd000 - 00000000bfa0f000 (reserved)
 BIOS-e820: 00000000bfa0f000 - 00000000bfb08000 (usable)
 BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved)
 BIOS-e820: 00000000bfd0f000 - 00000000bfd18000 (usable)
 BIOS-e820: 00000000bfd18000 - 00000000bfd1f000 (reserved)
 BIOS-e820: 00000000bfd1f000 - 00000000bfd65000 (usable)
 BIOS-e820: 00000000bfd65000 - 00000000bfd9f000 (ACPI NVS)
 BIOS-e820: 00000000bfd9f000 - 00000000bfe00000 (ACPI data)
 BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
last_pfn = 0x140000 max_arch_pfn = 0x3ffffffff
last_pfn = 0xbfd65 max_arch_pfn = 0x3ffffffff
init_memory_mapping
 0000000000 - 00bfc00000 page 2M
 00bfc00000 - 00bfd65000 page 4k
kernel direct mapping tables up to bfd65000 @ 8000-d000
last_map_addr: bfd65000 end: bfd65000
init_memory_mapping
 0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ b000-11000
last_map_addr: 140000000 end: 140000000
DMI present.
ACPI: RSDP 000F72E0, 0024 (r2 PTLTD )
ACPI: XSDT BFDF86A9, 006C (r1 SECCSD LH43STAR  6040000  LTP        0)
ACPI: FACP BFDE8000, 00F4 (r3 INTEL  CRESTLNE  6040000 ALAN        1)
ACPI: DSDT BFDE9000, 64E1 (r2 Intel  CANTIGA   6040000 INTL 20050624)
ACPI: FACS BFD9EFC0, 0040
ACPI: HPET BFDFED86, 0038 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
ACPI: MCFG BFDFEDBE, 003C (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
ACPI: APIC BFDFEDFA, 0068 (r1 PTLTD  	 APIC    6040000  LTP        0)
ACPI: BOOT BFDFEE62, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
ACPI: SLIC BFDFEE8A, 0176 (r1 SECCSD LH43STAR  6040000  LTP        0)
ACPI: SSDT BFDE7000, 05F9 (r1  PmRef    CpuPm     3000 INTL 20050624)
ACPI: SSDT BFDE6000, 0259 (r1  PmRef  Cpu0Tst     3000 INTL 20050624)
ACPI: SSDT BFDE5000, 020F (r1  PmRef    ApTst     3000 INTL 20050624)
ACPI: DMI detected: Samsung
No NUMA configuration found
Faking a node at 0000000000000000-0000000140000000
Bootmem setup node 0 0000000000000000-0000000140000000
  NODE_DATA [0000000000001000 - 0000000000004fff]
  bootmap [000000000000c000 -  0000000000033fff] pages 28
(6 early reservations) ==> bootmem [0000000000 - 0140000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 0000752ba4]    TEXT DATA BSS ==> [0000200000 - 0000752ba4]
  #3 [000009e400 - 0000100000]    BIOS reserved ==> [000009e400 - 0000100000]
  #4 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
  #5 [000000b000 - 000000c000]          PGTABLE ==> [000000b000 - 000000c000]
found SMP MP-table at [ffff8800000f7380] 000f7380
 [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
    0: 0x00000000 -> 0x0000009e
    0: 0x00000100 -> 0x000bf8a1
    0: 0x000bf8a7 -> 0x000bf9bd
    0: 0x000bfa0f -> 0x000bfb08
    0: 0x000bfd0f -> 0x000bfd18
    0: 0x000bfd1f -> 0x000bfd65
    0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1047197
  DMA zone: 2474 pages, LIFO batch:0
  DMA32 zone: 766775 pages, LIFO batch:31
  Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
Allocating PCI resources starting at c0000000 (gap: bfe00000:40200000)
PERCPU: Allocating 45536 bytes of per cpu data
NR_CPUS: 4, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1027809
Policy zone: Normal
Kernel command line: root=/dev/sda2 
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PMTIMER calibration value
Detected 2260.986 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x20000000 - 0x24000000
Memory: 4059652k/5242880k available (2920k kernel code, 129136k reserved, 1576k data, 400k init)
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 4523.38 BogoMIPS (lpj=7536620)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20080609
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
Using local APIC timer interrupts.
APIC timer calibration result 16624882
Detected 16.624 MHz APIC timer.
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4523.40 BogoMIPS (lpj=7536653)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (9047.79 BogoMIPS).
net_namespace: 552 bytes
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
PCI: 0000:00:1a.0 reg 20 io port: [1800, 181f]
PCI: 0000:00:1a.1 reg 20 io port: [1820, 183f]
PCI: 0000:00:1a.2 reg 20 io port: [1840, 185f]
PCI: 0000:00:1a.7 reg 10 32bit mmio: [fc204800, fc204bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
PCI: 0000:00:1b.0 reg 10 64bit mmio: [fc200000, fc203fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [1860, 187f]
PCI: 0000:00:1d.1 reg 20 io port: [1880, 189f]
PCI: 0000:00:1d.2 reg 20 io port: [18a0, 18bf]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [fc204c00, fc204fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
PCI: 0000:00:1f.2 reg 10 io port: [18f0, 18f7]
PCI: 0000:00:1f.2 reg 14 io port: [18e4, 18e7]
PCI: 0000:00:1f.2 reg 18 io port: [18e8, 18ef]
PCI: 0000:00:1f.2 reg 1c io port: [18e0, 18e3]
PCI: 0000:00:1f.2 reg 20 io port: [18c0, 18df]
PCI: 0000:00:1f.2 reg 24 32bit mmio: [fc204000, fc2047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
PCI: 0000:00:1f.3 reg 10 64bit mmio: [0, ff]
PCI: 0000:00:1f.3 reg 20 io port: [1c00, 1c1f]
PCI: 0000:01:00.0 reg 10 32bit mmio: [ce000000, ceffffff]
PCI: 0000:01:00.0 reg 14 32bit mmio: [d0000000, dfffffff]
PCI: 0000:01:00.0 reg 1c 64bit mmio: [cc000000, cdffffff]
PCI: 0000:01:00.0 reg 24 io port: [2000, 207f]
PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 7ffff]
PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
PCI: bridge 0000:00:01.0 32bit mmio: [cc000000, ceffffff]
PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff]
PCI: 0000:02:00.0 reg 10 64bit mmio: [f6000000, f6001fff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
PCI: bridge 0000:00:1c.0 io port: [3000, 3fff]
PCI: bridge 0000:00:1c.0 32bit mmio: [f6000000, f7ffffff]
PCI: bridge 0000:00:1c.0 64bit mmio pref: [f0000000, f1ffffff]
PCI: bridge 0000:00:1c.2 io port: [4000, 4fff]
PCI: bridge 0000:00:1c.2 32bit mmio: [f8000000, f9ffffff]
PCI: bridge 0000:00:1c.2 64bit mmio pref: [f2000000, f3ffffff]
PCI: 0000:06:00.0 reg 10 64bit mmio: [fa000000, fa003fff]
PCI: 0000:06:00.0 reg 18 io port: [5000, 50ff]
PCI: 0000:06:00.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:06:00.0: supports D1
pci 0000:06:00.0: supports D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PME# disabled
PCI: bridge 0000:00:1c.3 io port: [5000, 5fff]
PCI: bridge 0000:00:1c.3 32bit mmio: [fa000000, fbffffff]
PCI: bridge 0000:00:1c.3 64bit mmio pref: [f4000000, f5ffffff]
pci 0000:00:1e.0: transparent bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:05: io resource (0x5000-0x500f) overlaps 0000:00:1c.3 BAR 7 (0x5000-0x5fff), disabling
pnp 00:05: io resource (0x5000-0x500f) overlaps 0000:06:00.0 BAR 2 (0x5000-0x50ff), disabling
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 64-bit timers, 14318180 Hz
system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:05: ioport range 0x680-0x69f has been reserved
system 00:05: ioport range 0x480-0x48f has been reserved
system 00:05: ioport range 0xffff-0xffff has been reserved
system 00:05: ioport range 0xffff-0xffff has been reserved
system 00:05: ioport range 0x400-0x47f has been reserved
system 00:05: ioport range 0x480-0x48f has been reserved
system 00:05: ioport range 0x1180-0x11ff has been reserved
system 00:05: ioport range 0x164e-0x164f has been reserved
system 00:05: ioport range 0xfe00-0xfe00 has been reserved
system 00:06: ioport range 0x6a0-0x6af has been reserved
system 00:06: ioport range 0x6b0-0x6ff has been reserved
system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:0a: iomem range 0xfed10000-0xfed13fff has been reserved
system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved
pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x2000-0x2fff
pci 0000:00:01.0:   MEM window: 0xcc000000-0xceffffff
pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
pci 0000:00:1c.0:   MEM window: 0xf6000000-0xf7ffffff
pci 0000:00:1c.0:   PREFETCH window: 0x000000f0000000-0x000000f1ffffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2:   IO window: 0x4000-0x4fff
pci 0000:00:1c.2:   MEM window: 0xf8000000-0xf9ffffff
pci 0000:00:1c.2:   PREFETCH window: 0x000000f2000000-0x000000f3ffffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.3:   IO window: 0x5000-0x5fff
pci 0000:00:1c.3:   MEM window: 0xfa000000-0xfbffffff
pci 0000:00:1c.3:   PREFETCH window: 0x000000f4000000-0x000000f5ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: disabled
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [2000, 2fff]
bus: 01 index 1 mmio: [cc000000, ceffffff]
bus: 01 index 2 mmio: [d0000000, dfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [3000, 3fff]
bus: 02 index 1 mmio: [f6000000, f7ffffff]
bus: 02 index 2 mmio: [f0000000, f1ffffff]
bus: 02 index 3 mmio: [0, 0]
bus: 04 index 0 io port: [4000, 4fff]
bus: 04 index 1 mmio: [f8000000, f9ffffff]
bus: 04 index 2 mmio: [f2000000, f3ffffff]
bus: 04 index 3 mmio: [0, 0]
bus: 06 index 0 io port: [5000, 5fff]
bus: 06 index 1 mmio: [fa000000, fbffffff]
bus: 06 index 2 mmio: [f4000000, f5ffffff]
bus: 06 index 3 mmio: [0, 0]
bus: 08 index 0 mmio: [0, 0]
bus: 08 index 1 mmio: [0, 0]
bus: 08 index 2 mmio: [0, 0]
bus: 08 index 3 io port: [0, ffff]
bus: 08 index 4 mmio: [0, ffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Simple Boot Flag at 0x37 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1223502307.359:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
msgmni has been set to 7929
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0030
pci 0000:00:1a.0: Performing full reset
pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010
pci 0000:00:1a.1: Performing full reset
pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0010
pci 0000:00:1a.2: Performing full reset
pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0030
pci 0000:00:1d.0: Performing full reset
pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
pci 0000:00:1d.1: Performing full reset
pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
pci 0000:00:1d.2: Performing full reset
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie02: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
pci_express 0000:00:1c.2:pcie03: allocate port service
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.3: found MSI capability
pci_express 0000:00:1c.3:pcie00: allocate port service
pci_express 0000:00:1c.3:pcie02: allocate port service
pci_express 0000:00:1c.3:pcie03: allocate port service
ALI M7101 PMU not found.
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
ACPI: Sleep Button (CM) [SLPB]
ACPI: Transitioning device [FAN0] to D3
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN0] (off)
ACPI: Transitioning device [FAN1] to D3
fan PNP0C0B:01: registered as cooling_device1
ACPI: Fan [FAN1] (off)
ACPI: SSDT BFD1AC20, 0265 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
ACPI: SSDT BFD18720, 064C (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor ACPI0007:00: registered as cooling_device2
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT BFD19CA0, 01CF (r1  PmRef    ApIst     3000 INTL 20050624)
ACPI: SSDT BFD19F20, 008D (r1  PmRef    ApCst     3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2])
processor ACPI0007:01: registered as cooling_device3
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (32 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (32 C)
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
loop: module loaded
sky2 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sky2 0000:06:00.0: setting latency timer to 64
sky2 0000:06:00.0: v1.22 addr 0xfa000000 irq 19 Yukon-2 EC Ultra rev 3
sky2 eth0: addr 00:13:77:aa:0b:f8
Loading iSCSI transport class v2.0-870.
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204100 irq 378
ata2: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204180 irq 378
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204300 irq 378
ata6: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204380 irq 378
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: Hitachi HTS543232L9A300, FB4OC40C, max UDMA/133
ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, SC03, max UDMA/100, ATAPI AN
ata2.00: applying bridge limits
ata2.00: configured for UDMA/100
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54323 FB4O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633A  SC03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usbmon: debugfs is not available
ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1a.7: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: supports USB remote wakeup
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc204800
ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: default language 0x0409
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
ehci_hcd 0000:00:1a.7: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 3: status 0501 change 0001
hub 1-0:1.0: state 7 ports 6 chg 0008 evt 0000
drivers/usb/core/inode.c: creating file '001'
hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27-rc7 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1d.7: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: supports USB remote wakeup
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc204c00
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1a.7: port 3 high speed
ehci_hcd 0000:00:1a.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
usb 1-3: new high speed USB device using ehci_hcd and address 2
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: default language 0x0409
usb usb2: uevent
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 20ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: trying to enable port power on non-switchable hub
ehci_hcd 0000:00:1a.7: port 3 high speed
ehci_hcd 0000:00:1a.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
hub 2-0:1.0: port 6: status 0501 change 0001
drivers/usb/core/inode.c: creating file '001'
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27-rc7 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
drivers/usb/core/inode.c: creating file '003'
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1a.0: Performing full reset
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb3: default language 0x0409
usb usb3: uevent
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27-rc7 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
drivers/usb/core/inode.c: creating file '004'
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1a.1: Performing full reset
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb4: default language 0x0409
usb usb4: uevent
usb usb4: usb_probe_device
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
usb 4-0:1.0: uevent
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: individual port over-current protection
hub 4-0:1.0: power on to power good time: 2ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: trying to enable port power on non-switchable hub
uhci_hcd 0000:00:1a.1: port 1 portsc 0082,00
drivers/usb/core/inode.c: creating file '001'
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27-rc7 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
drivers/usb/core/inode.c: creating file '005'
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1a.2: Performing full reset
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
usb usb5: default language 0x0409
usb usb5: uevent
usb usb5: usb_probe_device
usb usb5: configuration #1 chosen from 1 choice
usb usb5: adding 5-0:1.0 (config #1, interface 0)
usb 5-0:1.0: uevent
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 5-0:1.0: standalone hub
hub 5-0:1.0: no power switching (usb 1.0)
hub 5-0:1.0: individual port over-current protection
hub 5-0:1.0: power on to power good time: 2ms
hub 5-0:1.0: local power source is good
hub 5-0:1.0: trying to enable port power on non-switchable hub
usb 1-3: skipped 1 descriptor after configuration
usb 1-3: skipped 4 descriptors after interface
usb 1-3: skipped 1 descriptor after endpoint
usb 1-3: skipped 14 descriptors after interface
usb 1-3: default language 0x0409
drivers/usb/core/inode.c: creating file '001'
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27-rc7 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
drivers/usb/core/inode.c: creating file '006'
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.0: Performing full reset
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
usb usb6: default language 0x0409
usb usb6: uevent
usb usb6: usb_probe_device
usb usb6: configuration #1 chosen from 1 choice
usb usb6: adding 6-0:1.0 (config #1, interface 0)
usb 6-0:1.0: uevent
hub 6-0:1.0: usb_probe_interface
hub 6-0:1.0: usb_probe_interface - got id
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
hub 6-0:1.0: standalone hub
hub 6-0:1.0: no power switching (usb 1.0)
hub 6-0:1.0: individual port over-current protection
hub 6-0:1.0: power on to power good time: 2ms
hub 6-0:1.0: local power source is good
hub 6-0:1.0: trying to enable port power on non-switchable hub
usb 1-3: uevent
usb 1-3: usb_probe_device
usb 1-3: configuration #1 chosen from 1 choice
usb 1-3: adding 1-3:1.0 (config #1, interface 0)
usb 1-3:1.0: uevent
usb 1-3: adding 1-3:1.1 (config #1, interface 1)
usb 1-3:1.1: uevent
drivers/usb/core/inode.c: creating file '002'
usb 1-3: New USB device found, idVendor=174f, idProduct=5931
usb 1-3: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-3: Product: USB2.0 UVC PC Camera
usb 1-3: Manufacturer: Syntek
usb 1-3: SerialNumber: 0001
hub 2-0:1.0: state 7 ports 6 chg 0040 evt 0000
hub 2-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:1d.7: port 6 full speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003801 POWER OWNER sig=j CONNECT
hub 2-0:1.0: port 6 not reset yet, waiting 50ms
drivers/usb/core/inode.c: creating file '001'
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.27-rc7 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
drivers/usb/core/inode.c: creating file '007'
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.1: Performing full reset
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
usb usb7: default language 0x0409
usb usb7: uevent
usb usb7: usb_probe_device
usb usb7: configuration #1 chosen from 1 choice
usb usb7: adding 7-0:1.0 (config #1, interface 0)
usb 7-0:1.0: uevent
hub 7-0:1.0: usb_probe_interface
hub 7-0:1.0: usb_probe_interface - got id
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
hub 7-0:1.0: standalone hub
hub 7-0:1.0: no power switching (usb 1.0)
hub 7-0:1.0: individual port over-current protection
hub 7-0:1.0: power on to power good time: 2ms
hub 7-0:1.0: local power source is good
hub 7-0:1.0: trying to enable port power on non-switchable hub
ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0040
hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.27-rc7 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
drivers/usb/core/inode.c: creating file '008'
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.2: Performing full reset
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
usb usb8: default language 0x0409
usb usb8: uevent
usb usb8: usb_probe_device
usb usb8: configuration #1 chosen from 1 choice
usb usb8: adding 8-0:1.0 (config #1, interface 0)
usb 8-0:1.0: uevent
hub 8-0:1.0: usb_probe_interface
hub 8-0:1.0: usb_probe_interface - got id
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
hub 8-0:1.0: standalone hub
hub 8-0:1.0: no power switching (usb 1.0)
hub 8-0:1.0: individual port over-current protection
hub 8-0:1.0: power on to power good time: 2ms
hub 8-0:1.0: local power source is good
hub 8-0:1.0: trying to enable port power on non-switchable hub
uhci_hcd 0000:00:1d.2: port 2 portsc 0093,00
hub 8-0:1.0: port 2: status 0101 change 0001
hub 8-0:1.0: state 7 ports 2 chg 0004 evt 0000
drivers/usb/core/inode.c: creating file '001'
hub 8-0:1.0: port 2, status 0101, change 0000, 12 Mb/s
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.27-rc7 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
Initializing USB Mass Storage driver...
usb 8-2: new full speed USB device using uhci_hcd and address 2
usb 8-2: skipped 1 descriptor after interface
usb 8-2: default language 0x0409
usb 8-2: uevent
usb 8-2: usb_probe_device
usb 8-2: configuration #1 chosen from 1 choice
usb 8-2: adding 8-2:1.0 (config #1, interface 0)
usb 8-2:1.0: uevent
usb 8-2: adding 8-2:1.1 (config #1, interface 1)
usb 8-2:1.1: uevent
usb 8-2: adding 8-2:1.2 (config #1, interface 2)
usb 8-2:1.2: uevent
usb 8-2: adding 8-2:1.3 (config #1, interface 3)
usb 8-2:1.3: uevent
drivers/usb/core/inode.c: creating file '002'
usb 8-2: New USB device found, idVendor=0a5c, idProduct=2101
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-2: Product: BCM92045NMD
usb 8-2: Manufacturer: Broadcom Corp
usb 8-2: SerialNumber: 0002787A6E54
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
usb usb3: suspend_rh (auto-stop)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, hpet irqs
usb usb4: suspend_rh (auto-stop)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f]
ACPI: Device needs an ACPI driver
cpuidle: using governor ladder
cpuidle: using governor menu
Marking TSC unstable due to TSC halts in idle
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.17.
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
ALSA device list:
  #0: HDA Intel at 0xfc200000 irq 22
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
usb usb5: suspend_rh (auto-stop)
usb usb6: suspend_rh (auto-stop)
usb usb7: suspend_rh (auto-stop)
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa00000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 400k freed
CE: hpet increasing min_delta_ns to 15000 nsec
CE: hpet increasing min_delta_ns to 22500 nsec
hub 3-0:1.0: hub_suspend
usb usb3: bus auto-suspend
usb usb3: suspend_rh
hub 4-0:1.0: hub_suspend
usb usb4: bus auto-suspend
usb usb4: suspend_rh
hub 5-0:1.0: hub_suspend
usb usb5: bus auto-suspend
usb usb5: suspend_rh
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend
ehci_hcd 0000:00:1d.7: suspend root hub
hub 6-0:1.0: hub_suspend
usb usb6: bus auto-suspend
usb usb6: suspend_rh
hub 7-0:1.0: hub_suspend
usb usb7: bus auto-suspend
usb usb7: suspend_rh
usb usb3: uevent
usb 3-0:1.0: uevent
usb usb4: uevent
usb 4-0:1.0: uevent
usb usb5: uevent
usb 5-0:1.0: uevent
usb usb1: uevent
usb 1-0:1.0: uevent
usb 1-3: uevent
usb 1-3:1.0: uevent
usb 1-3:1.1: uevent
usb usb6: uevent
usb 6-0:1.0: uevent
usb usb7: uevent
usb 7-0:1.0: uevent
usb usb8: uevent
usb 8-0:1.0: uevent
usb 8-2: uevent
usb 8-2:1.0: uevent
usb 8-2:1.1: uevent
usb 8-2:1.2: uevent
usb 8-2:1.3: uevent
usb usb2: uevent
usb 2-0:1.0: uevent
Linux video capture interface: v2.00
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.3
btusb 8-2:1.0: usb_probe_interface
btusb 8-2:1.0: usb_probe_interface - got id
btusb 8-2:1.2: usb_probe_interface
btusb 8-2:1.2: usb_probe_interface - got id
btusb 8-2:1.3: usb_probe_interface
btusb 8-2:1.3: usb_probe_interface - got id
usbcore: registered new interface driver btusb
uvcvideo 1-3:1.0: usb_probe_interface
uvcvideo 1-3:1.0: usb_probe_interface - got id
uvcvideo: Found UVC 1.00 device USB2.0 UVC PC Camera (174f:5931)
uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
nvidia: module license 'NVIDIA' taints kernel.
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  177.78  Fri Sep 26 10:38:09 PDT 2008
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
EXT3 FS on sda2, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sky2 eth0: enabling interface
Adding 987988k swap on /dev/sda3.  Priority:-1 extents:1 across:987988k
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
Comment 6 Thomas 2008-10-13 13:37:43 UTC
In this Problem doesn't exist in Bios, Windows or Dos. Even if i plug/unplug power supply at the beginning of the Kernel, it doesn't matter. The bug is located shortly before the SATA Drivers. The SATA Driver it self is not the Problem, because I used the old SATA Driver and had the same thing.

Please, if I can do something for you, let me know, and I try to test it.
Comment 7 Thomas 2008-10-14 13:34:01 UTC
Please have also a look to Bugreport 11753, in my opinion, there could be a link.
Comment 8 Alan 2008-10-14 13:52:24 UTC
Looks totally unrelated. No idea what your bug is and short of systematically turning things off and seeing what does and doesn't boot it would he very hard to find out.
Comment 9 Thomas 2008-10-14 14:21:15 UTC
I got this further information:

If i plug unplug at the marked Point doesn't cause the Problem. The Problem occurs after this Point. And the Problem doesn't occur, if the kernel has Panic.

Linux version 2.6.27 (root@rechner1) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #5 Tue Oct 14 22:58:09 CEST 2008
Command line: root=/dev/sda2 init=/bin/bash
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
 BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable)
 BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
 BIOS-e820: 00000000bf8a7000 - 00000000bf9bd000 (usable)
 BIOS-e820: 00000000bf9bd000 - 00000000bfa0f000 (reserved)
 BIOS-e820: 00000000bfa0f000 - 00000000bfb08000 (usable)
 BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved)
 BIOS-e820: 00000000bfd0f000 - 00000000bfd18000 (usable)
 BIOS-e820: 00000000bfd18000 - 00000000bfd1f000 (reserved)
 BIOS-e820: 00000000bfd1f000 - 00000000bfd65000 (usable)
 BIOS-e820: 00000000bfd65000 - 00000000bfd9f000 (ACPI NVS)
 BIOS-e820: 00000000bfd9f000 - 00000000bfe00000 (ACPI data)
 BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
last_pfn = 0x140000 max_arch_pfn = 0x3ffffffff
last_pfn = 0xbfd65 max_arch_pfn = 0x3ffffffff
init_memory_mapping
 0000000000 - 00bfc00000 page 2M
 00bfc00000 - 00bfd65000 page 4k
kernel direct mapping tables up to bfd65000 @ 8000-d000
last_map_addr: bfd65000 end: bfd65000
init_memory_mapping
 0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ b000-11000
last_map_addr: 140000000 end: 140000000
DMI present.
(5 early reservations) ==> bootmem [0000000000 - 0140000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000200000 - 000043b660]    TEXT DATA BSS ==> [0000200000 - 000043b660]
  #2 [000009e400 - 0000100000]    BIOS reserved ==> [000009e400 - 0000100000]
  #3 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
  #4 [000000b000 - 000000c000]          PGTABLE ==> [000000b000 - 000000c000]
found SMP MP-table at [ffff8800000f7380] 000f7380
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
    0: 0x00000000 -> 0x0000009e
    0: 0x00000100 -> 0x000bf8a1
    0: 0x000bf8a7 -> 0x000bf9bd
    0: 0x000bfa0f -> 0x000bfb08
    0: 0x000bfd0f -> 0x000bfd18
    0: 0x000bfd1f -> 0x000bfd65
    0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1047197
  DMA zone: 3267 pages, LIFO batch:0
  DMA32 zone: 766775 pages, LIFO batch:31
  Normal zone: 258560 pages, LIFO batch:31
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: INTEL   
MPTABLE: Product ID: MontavinaCRB
MPTABLE: APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
Processor #1
WARNING: NR_CPUS limit of 1 reached. Processor ignored.
I/O APIC #2 Version 32 at 0xFEC00000.
Setting APIC routing to flat
Processors: 1
Allocating PCI resources starting at c0000000 (gap: bfe00000:40200000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1028602
Kernel command line: root=/dev/sda2 init=/bin/bash
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC: Using PIT calibration value
Detected 2260.987 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x20000000 - 0x24000000
Memory: 4041564k/5242880k available (1300k kernel code, 146284k reserved, 527k data, 160k init)
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 4523.38 BogoMIPS (lpj=7536623)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
using mwait in idle threads.
CPU: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
ExtINT not setup in hardware but reported by MP table
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
Using local APIC timer interrupts.
APIC timer calibration result 16624901
Detected 16.624 MHz APIC timer.
PCI: Using configuration type 1 for base access
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
PCI: 0000:00:1a.0 reg 20 io port: [1800, 181f]
PCI: 0000:00:1a.1 reg 20 io port: [1820, 183f]
PCI: 0000:00:1a.2 reg 20 io port: [1840, 185f]
PCI: 0000:00:1a.7 reg 10 32bit mmio: [fc204800, fc204bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
PCI: 0000:00:1b.0 reg 10 64bit mmio: [fc200000, fc203fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [1860, 187f]
PCI: 0000:00:1d.1 reg 20 io port: [1880, 189f]
PCI: 0000:00:1d.2 reg 20 io port: [18a0, 18bf]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [fc204c00, fc204fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
PCI: 0000:00:1f.2 reg 10 io port: [18f0, 18f7]
PCI: 0000:00:1f.2 reg 14 io port: [18e4, 18e7]
PCI: 0000:00:1f.2 reg 18 io port: [18e8, 18ef]
PCI: 0000:00:1f.2 reg 1c io port: [18e0, 18e3]
PCI: 0000:00:1f.2 reg 20 io port: [18c0, 18df]
PCI: 0000:00:1f.2 reg 24 32bit mmio: [fc204000, fc2047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
PCI: 0000:00:1f.3 reg 10 64bit mmio: [0, ff]
PCI: 0000:00:1f.3 reg 20 io port: [1c00, 1c1f]
PCI: 0000:01:00.0 reg 10 32bit mmio: [ce000000, ceffffff]
PCI: 0000:01:00.0 reg 14 32bit mmio: [d0000000, dfffffff]
PCI: 0000:01:00.0 reg 1c 64bit mmio: [cc000000, cdffffff]
PCI: 0000:01:00.0 reg 24 io port: [2000, 207f]
PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 7ffff]
PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
PCI: bridge 0000:00:01.0 32bit mmio: [cc000000, ceffffff]
PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff]
PCI: 0000:02:00.0 reg 10 64bit mmio: [f6000000, f6001fff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
PCI: bridge 0000:00:1c.0 io port: [3000, 3fff]
PCI: bridge 0000:00:1c.0 32bit mmio: [f6000000, f7ffffff]
PCI: bridge 0000:00:1c.0 64bit mmio pref: [f0000000, f1ffffff]
PCI: bridge 0000:00:1c.2 io port: [4000, 4fff]
PCI: bridge 0000:00:1c.2 32bit mmio: [f8000000, f9ffffff]
PCI: bridge 0000:00:1c.2 64bit mmio pref: [f2000000, f3ffffff]
PCI: 0000:06:00.0 reg 10 64bit mmio: [fa000000, fa003fff]
PCI: 0000:06:00.0 reg 18 io port: [5000, 50ff]
PCI: 0000:06:00.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:06:00.0: supports D1
pci 0000:06:00.0: supports D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PME# disabled
PCI: bridge 0000:00:1c.3 io port: [5000, 5fff]
PCI: bridge 0000:00:1c.3 32bit mmio: [fa000000, fbffffff]
PCI: bridge 0000:00:1c.3 64bit mmio pref: [f4000000, f5ffffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:01.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:00:1a.1: PCI->APIC IRQ transform: INT B -> IRQ 21
pci 0000:00:1a.2: PCI->APIC IRQ transform: INT C -> IRQ 19
pci 0000:00:1a.7: PCI->APIC IRQ transform: INT C -> IRQ 19
pci 0000:00:1b.0: PCI->APIC IRQ transform: INT A -> IRQ 22
pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 17
pci 0000:00:1c.2: PCI->APIC IRQ transform: INT C -> IRQ 18
pci 0000:00:1c.3: PCI->APIC IRQ transform: INT D -> IRQ 19
pci 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
pci 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19
pci 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18
pci 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 23
pci 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19
pci 0000:00:1f.3: PCI->APIC IRQ transform: INT C -> IRQ 19
pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:06:00.0: PCI->APIC IRQ transform: INT A -> IRQ 19
PCI-GART: No AMD northbridge found.
pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x2000-0x2fff
pci 0000:00:01.0:   MEM window: 0xcc000000-0xceffffff
pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
pci 0000:00:1c.0:   MEM window: 0xf6000000-0xf7ffffff
pci 0000:00:1c.0:   PREFETCH window: 0x000000f0000000-0x000000f1ffffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2:   IO window: 0x4000-0x4fff
pci 0000:00:1c.2:   MEM window: 0xf8000000-0xf9ffffff
pci 0000:00:1c.2:   PREFETCH window: 0x000000f2000000-0x000000f3ffffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.3:   IO window: 0x5000-0x5fff
pci 0000:00:1c.3:   MEM window: 0xfa000000-0xfbffffff
pci 0000:00:1c.3:   PREFETCH window: 0x000000f4000000-0x000000f5ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: disabled
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [2000, 2fff]
bus: 01 index 1 mmio: [cc000000, ceffffff]
bus: 01 index 2 mmio: [d0000000, dfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [3000, 3fff]
bus: 02 index 1 mmio: [f6000000, f7ffffff]
bus: 02 index 2 mmio: [f0000000, f1ffffff]
bus: 02 index 3 mmio: [0, 0]
bus: 04 index 0 io port: [4000, 4fff]
bus: 04 index 1 mmio: [f8000000, f9ffffff]
bus: 04 index 2 mmio: [f2000000, f3ffffff]
bus: 04 index 3 mmio: [0, 0]
bus: 06 index 0 io port: [5000, 5fff]
bus: 06 index 1 mmio: [fa000000, fbffffff]
bus: 06 index 2 mmio: [f4000000, f5ffffff]
bus: 06 index 3 mmio: [0, 0]
bus: 08 index 0 mmio: [0, 0]
bus: 08 index 1 mmio: [0, 0]
bus: 08 index 2 mmio: [0, 0]
bus: 08 index 3 io port: [0, ffff]
bus: 08 index 4 mmio: [0, ffffffffffffffff]
io scheduler noop registered
io scheduler anticipatory registered (default)      <<<<<<<<<<<<<<<<<<<<< MARK
pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie02: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.3: found MSI capability
pci_express 0000:00:1c.3:pcie00: allocate port service
pci_express 0000:00:1c.3:pcie02: allocate port service
Linux agpgart interface v0.103
Driver 'sd' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204100 irq 19
ata2: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204180 irq 19
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204300 irq 19
ata6: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204380 irq 19
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: Hitachi HTS543232L9A300, FB4OC40C, max UDMA/133
ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, SC03, max UDMA/100, ATAPI AN
ata2.00: applying bridge limits
ata2.00: configured for UDMA/100
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54323 FB4O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633A  SC03 PQ: 0 ANSI: 5
scsi 1:0:0:0: Attached scsi generic sg1 type 5
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 160k freed
EXT3 FS on sda2, internal journal
Comment 10 Alan 2008-10-15 03:32:19 UTC
Very weird indeed. If you build with CONFIG_USB=n (ie no USB) what is the behaviour ?
Comment 11 Thomas 2008-10-15 11:44:35 UTC
At my last try I had this option commented. But no differendce. Please have a look at my last Comment (nr 9).
Comment 12 Zhang Rui 2008-10-30 00:30:19 UTC
thomas,
please verify if this is a duplicate of bug #11658.
Comment 13 Thomas 2008-10-30 14:50:00 UTC
No I don't think that his is a dublicate because setting of the Paramter
CONFIG_X86_RESERVE_LOW_64K=y
does not make any change.
Comment 14 Thomas 2008-11-06 10:30:00 UTC
System crashes also without acpi video drivers
Comment 15 Thomas 2008-11-17 14:09:52 UTC
Created attachment 18895 [details]
dmsg2.6.28_rc5
Comment 16 Thomas 2008-11-17 14:11:46 UTC
Created attachment 18896 [details]
Kernel Config for my 2.6.28_rc5
Comment 17 Thomas 2008-11-17 14:12:35 UTC
Created attachment 18897 [details]
Acpi Dump 2.6.28_rc5
Comment 18 Thomas 2008-11-17 14:15:09 UTC
If I try to boot with acpi=off apm=off usb=off
System hangs at 

io scheduler cfq registered (default)

Don't know why.
Comment 19 Thomas 2008-12-13 16:11:37 UTC
Is it possible to disable the kernel free process? because befor the free I can unplug the power supply, after the free system crashes
Comment 20 Thomas 2008-12-14 07:02:38 UTC
Please go to bug nr 12220 

@ Admin please Close this bugreport. Bugreport 12220 is the enhancement to this. To make it more easy to read this stuff.
Comment 21 Zhang Rui 2008-12-14 17:32:36 UTC

*** This bug has been marked as a duplicate of bug 12220 ***