[17179569.184000] Linux version 2.6.17-10-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Tue Dec 5 22:28:26 UTC 2006 (Ubuntu 2.6.17-10.34-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000001def0000 (usable)
[17179569.184000]  BIOS-e820: 000000001def0000 - 000000001deff000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000001deff000 - 000000001df00000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000001df00000 - 0000000020000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 478MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f8130
[17179569.184000] On node 0 totalpages: 122608
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 118512 pages, LIFO batch:31
[17179569.184000] DMI present.
[17179569.184000] ACPI: RSDP (v000 HP                                    ) @ 0x000f8080
[17179569.184000] ACPI: RSDT (v001 HP     3097     0x20040830  LTP 0x00000000) @ 0x1def8bcf
[17179569.184000] ACPI: FADT (v001 HP     3097     0x20040830 PTL  0x0000005f) @ 0x1defee2a
[17179569.184000] ACPI: SSDT (v001 PTLTD  POWERNOW 0x20040830  LTP 0x00000001) @ 0x1defee9e
[17179569.184000] ACPI: MADT (v001 PTLTD  	 3097   0x20040830  LTP 0x00000000) @ 0x1defef74
[17179569.184000] ACPI: MCFG (v001 PTLTD    MCFG   0x20040830  LTP 0x00000000) @ 0x1defefc4
[17179569.184000] ACPI: DSDT (v001 HP     3091     0x20040830 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ATI board detected. Disabling timer routing over 8254.
[17179569.184000] ACPI: PM-Timer IO Port: 0x8008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:12 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda5 ro quiet splash locale=es_ES pci=assign-busses
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 1795.226 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179572.856000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179572.856000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179572.864000] Memory: 476264k/490432k available (1910k kernel code, 13644k reserved, 1069k data, 308k init, 0k highmem)
[17179572.864000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179572.944000] Calibrating delay using timer specific routine.. 3595.70 BogoMIPS (lpj=7191404)
[17179572.944000] Security Framework v1.0.0 initialized
[17179572.944000] SELinux:  Disabled at boot.
[17179572.944000] Mount-cache hash table entries: 512
[17179572.944000] CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179572.944000] CPU: After vendor identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179572.944000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179572.944000] CPU: L2 Cache: 128K (64 bytes/line)
[17179572.944000] CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000001 00000000 00000001
[17179572.944000] Checking 'hlt' instruction... OK.
[17179572.960000] SMP alternatives: switching to UP code
[17179572.960000] Freeing SMP alternatives: 16k freed
[17179572.960000] checking if image is initramfs... it is
[17179573.484000] Freeing initrd memory: 5624k freed
[17179573.484000] ACPI: Core revision 20060707
[17179573.484000] ACPI: Looking for DSDT ... not found!
[17179573.488000] CPU0: AMD Mobile AMD Sempron(tm) Processor 3000+ stepping 02
[17179573.488000] Total of 1 processors activated (3595.70 BogoMIPS).
[17179573.488000] ENABLING IO-APIC IRQs
[17179573.488000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[17179573.632000] Brought up 1 CPUs
[17179573.632000] migration_cost=0
[17179573.632000] NET: Registered protocol family 16
[17179573.632000] EISA bus registered
[17179573.632000] ACPI: bus type pci registered
[17179573.632000] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[17179573.632000] PCI: Not using MMCONFIG.
[17179573.632000] PCI: PCI BIOS revision 2.10 entry at 0xfd8bc, last bus=5
[17179573.632000] PCI: Using configuration type 1
[17179573.632000] Setting up standard PCI resources
[17179573.632000] ACPI: Interpreter enabled
[17179573.632000] ACPI: Using IOAPIC for interrupt routing
[17179573.632000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.632000] PCI: Probing PCI hardware (bus 00)
[17179573.636000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
[17179573.636000] Boot video device is 0000:01:05.0
[17179573.636000] PCI: Transparent bridge - 0000:00:14.4
[17179573.636000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.640000] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[17179573.640000] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[17179573.640000] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[17179573.640000] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[17179573.640000] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[17179573.640000] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[17179573.640000] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[17179573.640000] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[17179573.640000] ACPI: Embedded Controller [EC0] (gpe 24) interrupt mode.
[17179573.644000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[17179573.644000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[17179573.644000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.644000] pnp: PnP ACPI init
[17179573.644000] pnp: PnP ACPI: found 10 devices
[17179573.644000] PnPBIOS: Disabled by ACPI PNP
[17179573.644000] PCI: Using ACPI for IRQ routing
[17179573.644000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179573.660000] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[17179573.660000] pnp: 00:08: ioport range 0x220-0x22f has been reserved
[17179573.660000] pnp: 00:08: ioport range 0x40b-0x40b has been reserved
[17179573.660000] pnp: 00:08: ioport range 0x4d0-0x4d1 has been reserved
[17179573.664000] PCI: Bridge: 0000:00:01.0
[17179573.664000]   IO window: 9000-9fff
[17179573.664000]   MEM window: d0100000-d01fffff
[17179573.664000]   PREFETCH window: d4000000-d7ffffff
[17179573.664000] PCI: Bus 3, cardbus bridge: 0000:02:09.0
[17179573.664000]   IO window: 0000a400-0000a4ff
[17179573.664000]   IO window: 0000a800-0000a8ff
[17179573.664000]   PREFETCH window: 30000000-31ffffff
[17179573.664000]   MEM window: 32000000-33ffffff
[17179573.664000] PCI: Bridge: 0000:00:14.4
[17179573.664000]   IO window: a000-afff
[17179573.664000]   MEM window: d0200000-d02fffff
[17179573.664000]   PREFETCH window: 30000000-31ffffff
[17179573.664000] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 17 (level, low) -> IRQ 185
[17179573.664000] PCI: Setting latency timer of device 0000:02:09.0 to 64
[17179573.664000] NET: Registered protocol family 2
[17179573.692000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179573.692000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[17179573.692000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[17179573.692000] TCP: Hash tables configured (established 16384 bind 8192)
[17179573.692000] TCP reno registered
[17179573.692000] audit: initializing netlink socket (disabled)
[17179573.692000] audit(1166710092.692:1): initialized
[17179573.692000] VFS: Disk quotas dquot_6.5.1
[17179573.692000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.692000] Initializing Cryptographic API
[17179573.692000] io scheduler noop registered
[17179573.692000] io scheduler anticipatory registered
[17179573.692000] io scheduler deadline registered
[17179573.692000] io scheduler cfq registered (default)
[17179573.692000] isapnp: Scanning for PnP cards...
[17179574.048000] isapnp: No Plug & Play device found
[17179574.080000] Real Time Clock Driver v1.12ac
[17179574.080000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179574.084000] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185
[17179574.084000] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[17179574.084000] mice: PS/2 mouse device common for all mice
[17179574.084000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179574.084000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179574.084000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179574.084000] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[17179574.096000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179574.096000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179574.096000] EISA: Probing bus 0 at eisa.0
[17179574.096000] Cannot allocate resource for EISA slot 1
[17179574.096000] Cannot allocate resource for EISA slot 8
[17179574.096000] EISA: Detected 0 cards.
[17179574.096000] TCP bic registered
[17179574.096000] NET: Registered protocol family 1
[17179574.096000] NET: Registered protocol family 8
[17179574.096000] NET: Registered protocol family 20
[17179574.096000] Using IPI No-Shortcut mode
[17179574.096000] ACPI: (supports S0 S3 S4 S5)
[17179574.096000] Freeing unused kernel memory: 308k freed
[17179574.132000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179575.228000] Capability LSM initialized
[17179575.264000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[17179575.264000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179575.268000] ACPI: Thermal Zone [THRM] (58 C)
[17179575.756000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[17179575.756000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193
[17179575.756000] ATIIXP: chipset revision 0
[17179575.756000] ATIIXP: not 100% native mode: will probe irqs later
[17179575.756000]     ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
[17179575.760000]     ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
[17179575.760000] Probing IDE interface ide0...
[17179576.048000] hda: TOSHIBA MK6025GAS, ATA DISK drive
[17179576.720000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.768000] Probing IDE interface ide1...
[17179577.560000] hdc: TSSTcorpCD/DVDW TS-L532R, ATAPI CD/DVD-ROM drive
[17179578.232000] ide1 at 0x170-0x177,0x376 on irq 15
[17179578.240000] hda: max request size: 128KiB
[17179578.248000] hda: 117210240 sectors (60011 MB), CHS=65535/16/63, UDMA(100)
[17179578.248000] hda: cache flushes supported
[17179578.248000]  hda: hda1 hda2 < hda5 hda6 hda7 >
[17179578.360000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, DMA
[17179578.360000] Uniform CD-ROM driver Revision: 3.20
[17179586.440000] usbcore: registered new driver usbfs
[17179586.440000] usbcore: registered new driver hub
[17179586.444000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179586.444000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 201
[17179586.444000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[17179586.444000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[17179586.832000] ohci_hcd 0000:00:13.0: irq 201, io mem 0xd0000000
[17179586.892000] usb usb1: configuration #1 chosen from 1 choice
[17179586.892000] hub 1-0:1.0: USB hub found
[17179586.892000] hub 1-0:1.0: 4 ports detected
[17179586.996000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 201
[17179586.996000] ehci_hcd 0000:00:13.2: EHCI Host Controller
[17179586.996000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[17179586.996000] ehci_hcd 0000:00:13.2: irq 201, io mem 0xd0002000
[17179586.996000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179586.996000] usb usb2: configuration #1 chosen from 1 choice
[17179586.996000] hub 2-0:1.0: USB hub found
[17179586.996000] hub 2-0:1.0: 8 ports detected
[17179587.100000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 201
[17179587.100000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[17179587.100000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[17179587.432000] ohci_hcd 0000:00:13.1: irq 201, io mem 0xd0001000
[17179587.492000] usb usb3: configuration #1 chosen from 1 choice
[17179587.492000] hub 3-0:1.0: USB hub found
[17179587.492000] hub 3-0:1.0: 4 ports detected
[17179587.696000] Attempting manual resume
[17179587.760000] kjournald starting.  Commit interval 5 seconds
[17179587.760000] EXT3-fs: mounted filesystem with ordered data mode.
[17179599.776000] Linux agpgart interface v0.101 (c) Dave Jones
[17179599.996000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179600.000000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179600.868000] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185
[17179600.884000] input: PC Speaker as /class/input/input1
[17179600.928000] ieee80211_crypt: registered algorithm 'NULL'
[17179600.928000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[17179600.928000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[17179600.980000] MC'97 0 converters and GPIO not ready (0x1)
[17179600.980000] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 185
[17179600.992000] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 17 (level, low) -> IRQ 185
[17179600.992000] Yenta: CardBus bridge found at 0000:02:09.0 [103c:3091]
[17179600.992000] Yenta: Enabling burst memory read transactions
[17179600.992000] Yenta: Using CSCINT to route CSC interrupts to PCI
[17179600.992000] Yenta: Routing CardBus interrupts to PCI
[17179600.992000] Yenta TI: socket 0000:02:09.0, mfunc 0x01a01b22, devctl 0x66
[17179601.020000] 8139too Fast Ethernet driver 0.9.27
[17179601.128000] bcm43xx driver
[17179601.224000] Yenta: ISA IRQ mask 0x0ee8, PCI irq 185
[17179601.224000] Socket status: 30000820
[17179601.224000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[17179601.224000] cs: IO port probe 0xa000-0xafff: clean.
[17179601.224000] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
[17179601.224000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff
[17179601.228000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 209
[17179601.228000] eth0: RealTek RTL8139 at 0xde96e000, 00:c0:9f:fd:c5:55, IRQ 209
[17179601.228000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[17179601.236000] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 20 (level, low) -> IRQ 217
[17179601.252000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179601.332000] eth0: link down
[17179601.612000] Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0
[17179601.648000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[17179601.676000] ts: Compaq touchscreen protocol output
[17179601.880000] pccard: CardBus card inserted into slot 0
[17179601.952000] cs: IO port probe 0x100-0x3af: clean.
[17179601.952000] cs: IO port probe 0x3e0-0x4ff: clean.
[17179601.952000] cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f
[17179601.956000] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
[17179601.956000] cs: IO port probe 0xa00-0xaff: clean.
[17179602.028000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
[17179602.028000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 185
[17179602.028000] rt2500 1.1.0 BETA4 2006/06/18 http://rt2x00.serialmonkey.com
[17179602.028000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[17179602.132000] rt2500 EEPROM:  1  2  3  4  5  6  7  8  9 10 11 12 13 14  Channel
[17179602.132000] rt2500 EEPROM:  3  3  3  3  2  2  2  2  2  2  2  2  1  1  dBm Maximum
[17179602.240000] lp: driver loaded but no devices found
[17179602.268000] Adding 522072k swap on /dev/disk/by-uuid/5d293319-90ad-445e-99b5-bb9256a999b3.  Priority:-1 extents:1 across:522072k
[17179602.484000] NET: Registered protocol family 17
[17179602.496000] EXT3 FS on hda5, internal journal
[17179608.376000] NET: Registered protocol family 10
[17179608.376000] lo: Disabled Privacy Extensions
[17179608.376000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17179608.376000] IPv6 over IPv4 tunneling driver
[17179618.404000] ra0: no IPv6 routers present
[17179626.708000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179626.796000] NTFS volume version 3.1.
[17179630.800000] CSLIP: code copyright 1989 Regents of the University of California
[17179630.808000] PPP generic driver version 2.4.2
[17179633.164000] ACPI: AC Adapter [ACAD] (on-line)
[17179633.336000] ACPI: Battery Slot [BAT1] (battery present)
[17179633.348000] ACPI: Power Button (FF) [PWRF]
[17179633.352000] ACPI: Power Button (CM) [PWRB]
[17179633.352000] ACPI: Sleep Button (CM) [SLPB]
[17179633.352000] ACPI: Lid Switch [LID]
[17179633.512000] ibm_acpi: ec object not found
[17179633.540000] pcc_acpi: loading...
[17179633.608000] wmi_add device=dde4d400
[17179633.608000] calling WQBA
[17179633.656000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[17179633.916000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
[17179633.916000] powernow-k8:    0 : fid 0xa (1800 MHz), vid 0xa (1300 mV)
[17179633.916000] powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0xc (1250 mV)
[17179633.916000] powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x13 (1075 mV)
[17179633.916000] cpu_init done, current fid 0xa, vid 0xa
[17179646.800000] apm: BIOS not found.
[17179661.076000] Bluetooth: Core ver 2.8
[17179661.076000] NET: Registered protocol family 31
[17179661.076000] Bluetooth: HCI device and connection manager initialized
[17179661.076000] Bluetooth: HCI socket layer initialized
[17179661.344000] Bluetooth: L2CAP ver 2.8
[17179661.344000] Bluetooth: L2CAP socket layer initialized
[17179661.756000] Bluetooth: RFCOMM socket layer initialized
[17179661.756000] Bluetooth: RFCOMM TTY layer initialized
[17179661.756000] Bluetooth: RFCOMM ver 1.7