[ 0.000000] Linux version 3.9.0-rc4-thermal+ (villes@ob6100) (gcc version 4.5.4 (Gentoo 4.5.4 p1.1, pie-0.4.7) ) #6 PREEMPT Thu Apr 18 01:17:54 EEST 2013 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffcffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007fff0bff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007fff0c00-0x000000007fffbfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007fffc000-0x000000007fffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: Hewlett-Packard HP Compaq nc6000 (DJ256A#AK8) /0890, BIOS 68BDD Ver. F.15 08/30/2006 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7ffd0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff] [ 0.000000] [mem 0x37000000-0x373fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff] [ 0.000000] [mem 0x30000000-0x36ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff] [ 0.000000] [mem 0x00100000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x2fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff] [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k [ 0.000000] BRK [0x0162f000, 0x0162ffff] PGTABLE [ 0.000000] ACPI: RSDP 000fdf80 00014 (v00 COMPAQ) [ 0.000000] ACPI: RSDT 7fff0c84 0002C (v01 HP HP0890 30080620 CPQ 00000001) [ 0.000000] ACPI: FACP 7fff0c00 00084 (v02 HP HP0890 00000002 CPQ 00000001) [ 0.000000] ACPI: DSDT 7fff0cb0 06DF6 (v01 HP nc6000 00010000 MSFT 0100000E) [ 0.000000] ACPI: FACS 7fffbe80 00040 [ 0.000000] ACPI: SSDT 7fff7aa6 0028A (v01 COMPAQ CPQGysr 00001001 MSFT 0100000E) [ 0.000000] 1159MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] BRK [0x01630000, 0x01630fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x377fdfff] [ 0.000000] HighMem [mem 0x377fe000-0x7ffcffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x7ffcffff] [ 0.000000] On node 0 totalpages: 524142 [ 0.000000] free_area_init_node: node 0, pgdat c1566c80, node_mem_map f67fe020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 223230 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2320 pages used for memmap [ 0.000000] HighMem zone: 296914 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] e820: [mem 0x80000000-0xffffffff] available for PCI devices [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522366 [ 0.000000] Kernel command line: root=/dev/sda3 resume=/dev/sda2 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0007ffd0) [ 0.000000] Memory: 2072908k/2096960k available (4008k kernel code, 23660k reserved, 1545k data, 312k init, 1187656k highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xfffe4000 - 0xfffff000 ( 108 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc156d000 - 0xc15bb000 ( 312 kB) .data : 0xc13ea12f - 0xc156c600 (1545 kB) .text : 0xc1000000 - 0xc13ea12f (4008 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] CPU 0 irqstacks, hard=f6006000 soft=f6008000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 598.071 MHz processor [ 0.006669] Calibrating delay loop (skipped), value calculated using timer frequency.. 1196.98 BogoMIPS (lpj=1993570) [ 0.006840] pid_max: default: 32768 minimum: 301 [ 0.006994] Security Framework initialized [ 0.007093] Mount-cache hash table entries: 512 [ 0.010070] mce: CPU supports 5 MCE banks [ 0.010191] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2 Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8 tlb_flushall_shift: 6 [ 0.010366] CPU: Intel(R) Pentium(R) M processor 1600MHz (fam: 06, model: 09, stepping: 05) [ 0.010659] ACPI: Core revision 20130117 [ 0.018859] ACPI: All ACPI Tables successfully acquired [ 0.019022] ACPI: setting ELCR to 0200 (from 0c00) [ 0.020122] Performance Events: [ 0.020173] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.020327] no hardware sampling interrupt available. [ 0.023341] p6 PMU driver. [ 0.023420] ... version: 0 [ 0.023500] ... bit width: 32 [ 0.023580] ... generic registers: 2 [ 0.023660] ... value mask: 00000000ffffffff [ 0.023744] ... max period: 000000007fffffff [ 0.023828] ... fixed-purpose events: 0 [ 0.023908] ... event mask: 0000000000000003 [ 0.024415] devtmpfs: initialized [ 0.024835] PM: Registering ACPI NVS region [mem 0x7fff0c00-0x7fffbfff] (46080 bytes) [ 0.024986] reboot: BIOS series board detected. Selecting HP Compaq Laptop-method for reboots. [ 0.025277] NET: Registered protocol family 16 [ 0.025605] kworker/u:0 (11) used greatest stack depth: 7456 bytes left [ 0.026375] ACPI: bus type PCI registered [ 0.028481] PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=5 [ 0.028571] PCI: Using configuration type 1 for base access [ 0.031416] kworker/u:0 (55) used greatest stack depth: 6992 bytes left [ 0.038782] bio: create slab at 0 [ 0.039121] ACPI: Added _OSI(Module Device) [ 0.039207] ACPI: Added _OSI(Processor Device) [ 0.039290] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.039374] ACPI: Added _OSI(Processor Aggregator Device) [ 0.042130] ACPI: EC: Look up EC in DSDT [ 0.068140] ACPI: Interpreter enabled [ 0.068140] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568) [ 0.068140] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568) [ 0.070032] ACPI: (supports S0 S3 S4 S5) [ 0.070115] ACPI: Using PIC for interrupt routing [ 0.070311] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.079482] ACPI: Power Resource [C16D] (on) [ 0.080918] ACPI: Power Resource [C13D] (on) [ 0.082678] ACPI: Power Resource [C184] (on) [ 0.084169] ACPI: Power Resource [C18B] (on) [ 0.085826] ACPI: Power Resource [C195] (on) [ 0.087705] ACPI: Power Resource [C0E6] (on) [ 0.096827] ACPI: Power Resource [C20B] (off) [ 0.097117] ACPI: Power Resource [C20C] (off) [ 0.097407] ACPI: Power Resource [C20D] (off) [ 0.097694] ACPI: Power Resource [C20E] (off) [ 0.108857] ACPI: PCI Root Bridge [C044] (domain 0000 [bus 00-ff]) [ 0.108961] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.127463] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.127475] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.127485] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.127494] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xfec00fff] (ignored) [ 0.127504] acpi PNP0A03:00: host bridge window [mem 0xfec02000-0xffffffff] (ignored) [ 0.127513] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.127521] PCI: root bus 00: using default resources [ 0.127531] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.127795] PCI host bridge to bus 0000:00 [ 0.127886] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.127975] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.128065] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.128177] pci 0000:00:00.0: [8086:3340] type 00 class 0x060000 [ 0.128196] pci 0000:00:00.0: reg 10: [mem 0xb0000000-0xbfffffff pref] [ 0.128481] pci 0000:00:01.0: [8086:3341] type 01 class 0x060400 [ 0.128728] pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300 [ 0.128794] pci 0000:00:1d.0: reg 20: [io 0x38c0-0x38df] [ 0.129024] pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300 [ 0.129089] pci 0000:00:1d.1: reg 20: [io 0x38e0-0x38ff] [ 0.129318] pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300 [ 0.129383] pci 0000:00:1d.2: reg 20: [io 0x3c00-0x3c1f] [ 0.129645] pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320 [ 0.129681] pci 0000:00:1d.7: reg 10: [mem 0xa0000000-0xa00003ff] [ 0.129787] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.130053] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060400 [ 0.130145] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.130407] pci 0000:00:1f.0: [8086:24cc] type 00 class 0x060100 [ 0.130498] pci 0000:00:1f.0: Enabled i801 SMBus device [ 0.130596] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO [ 0.130727] pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH4 GPIO [ 0.131000] pci 0000:00:1f.1: [8086:24ca] type 00 class 0x01018a [ 0.131026] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.131045] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.131063] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.131081] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.131099] pci 0000:00:1f.1: reg 20: [io 0x3c20-0x3c2f] [ 0.131117] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff] [ 0.131346] pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500 [ 0.131411] pci 0000:00:1f.3: reg 20: [io 0x1200-0x121f] [ 0.131664] pci 0000:00:1f.5: [8086:24c5] type 00 class 0x040100 [ 0.131692] pci 0000:00:1f.5: reg 10: [io 0x3000-0x30ff] [ 0.131709] pci 0000:00:1f.5: reg 14: [io 0x3880-0x38bf] [ 0.131727] pci 0000:00:1f.5: reg 18: [mem 0xa0100000-0xa01001ff] [ 0.131744] pci 0000:00:1f.5: reg 1c: [mem 0xa0180000-0xa01800ff] [ 0.131802] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.132023] pci 0000:00:1f.6: [8086:24c6] type 00 class 0x070300 [ 0.132051] pci 0000:00:1f.6: reg 10: [io 0x3400-0x34ff] [ 0.132068] pci 0000:00:1f.6: reg 14: [io 0x3800-0x387f] [ 0.132143] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.132506] pci 0000:01:00.0: [1002:4e50] type 00 class 0x030000 [ 0.132534] pci 0000:01:00.0: reg 10: [mem 0x98000000-0x9fffffff pref] [ 0.132550] pci 0000:01:00.0: reg 14: [io 0x2000-0x20ff] [ 0.132567] pci 0000:01:00.0: reg 18: [mem 0x90300000-0x9030ffff] [ 0.132604] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.132638] pci 0000:01:00.0: supports D1 D2 [ 0.132842] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.132935] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.132945] pci 0000:00:01.0: bridge window [mem 0x90300000-0x903fffff] [ 0.132956] pci 0000:00:01.0: bridge window [mem 0x98000000-0x9fffffff pref] [ 0.133111] pci 0000:02:04.0: [168c:0013] type 00 class 0x020000 [ 0.133141] pci 0000:02:04.0: reg 10: [mem 0x90080000-0x9008ffff] [ 0.133458] pci 0000:02:06.0: [1217:7223] type 02 class 0x060700 [ 0.133488] pci 0000:02:06.0: reg 10: [mem 0x90100000-0x90100fff] [ 0.133521] pci 0000:02:06.0: supports D1 D2 [ 0.133530] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.133729] pci 0000:02:06.1: [1217:7223] type 02 class 0x060700 [ 0.133759] pci 0000:02:06.1: reg 10: [mem 0x90180000-0x90180fff] [ 0.133792] pci 0000:02:06.1: supports D1 D2 [ 0.133800] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.134010] pci 0000:02:06.2: [1217:7110] type 00 class 0x088000 [ 0.134041] pci 0000:02:06.2: reg 10: [mem 0x90200000-0x90200fff] [ 0.134131] pci 0000:02:06.2: supports D1 D2 [ 0.134139] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.134347] pci 0000:02:06.3: [1217:7223] type 02 class 0x060700 [ 0.134377] pci 0000:02:06.3: reg 10: [mem 0x90280000-0x90280fff] [ 0.134410] pci 0000:02:06.3: supports D1 D2 [ 0.134418] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.134651] pci 0000:02:0e.0: [14e4:165e] type 00 class 0x020000 [ 0.134694] pci 0000:02:0e.0: reg 10: [mem 0x90000000-0x9000ffff 64bit] [ 0.134754] pci 0000:02:0e.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.134801] pci 0000:02:0e.0: PME# supported from D3hot D3cold [ 0.135022] pci 0000:00:1e.0: PCI bridge to [bus 02-05] (subtractive decode) [ 0.135125] pci 0000:00:1e.0: bridge window [mem 0x90000000-0x902fffff] [ 0.135138] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.135148] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.135317] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02-05] (conflicts with (null) [bus 02-05]) [ 0.135333] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 04 [ 0.135486] pci_bus 0000:05: busn_res: can not insert [bus 05-ff] under [bus 02-05] (conflicts with (null) [bus 02-05]) [ 0.135500] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 08 [ 0.135511] pci_bus 0000:05: busn_res: can not insert [bus 05-08] under [bus 02-05] (conflicts with (null) [bus 02-05]) [ 0.135525] pci_bus 0000:05: [bus 05-08] partially hidden behind transparent bridge 0000:02 [bus 02-05] [ 0.135805] pci_bus 0000:09: busn_res: can not insert [bus 09-ff] under [bus 02-05] (conflicts with (null) [bus 02-05]) [ 0.135819] pci_bus 0000:09: busn_res: [bus 09-ff] end is updated to 0c [ 0.135831] pci_bus 0000:09: busn_res: can not insert [bus 09-0c] under [bus 02-05] (conflicts with (null) [bus 02-05]) [ 0.135844] pci_bus 0000:09: [bus 09-0c] partially hidden behind transparent bridge 0000:02 [bus 02-05] [ 0.135992] pci_bus 0000:00: on NUMA node 0 [ 0.135997] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.138470] ACPI: PCI Interrupt Link [C0C1] (IRQs *10 11) [ 0.139005] ACPI: PCI Interrupt Link [C0C2] (IRQs 10 *11) [ 0.139530] ACPI: PCI Interrupt Link [C0C3] (IRQs *10 11) [ 0.140101] ACPI: PCI Interrupt Link [C0C4] (IRQs *10 11) [ 0.140628] ACPI: PCI Interrupt Link [C0C5] (IRQs 10 *11) [ 0.141151] ACPI: PCI Interrupt Link [C0C6] (IRQs 10 *11) [ 0.141654] ACPI: PCI Interrupt Link [C0C7] (IRQs 10 11) *0, disabled. [ 0.142252] ACPI: PCI Interrupt Link [C0C8] (IRQs *10 11) [ 0.143457] ACPI: Enabled 10 GPEs in block 00 to 1F [ 0.143631] acpi root: \_SB_.C044 notify handler is installed [ 0.143768] Found 1 acpi root devices [ 0.143866] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 0.144360] ACPI: No dock devices found. [ 0.144765] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.144894] vgaarb: loaded [ 0.144972] vgaarb: bridge control possible 0000:01:00.0 [ 0.145492] SCSI subsystem initialized [ 0.145577] ACPI: bus type ATA registered [ 0.145922] libata version 3.00 loaded. [ 0.146446] PCI: Using ACPI for IRQ routing [ 0.146573] PCI: pci_cache_line_size set to 64 bytes [ 0.146656] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.146726] e820: reserve RAM buffer [mem 0x7ffd0000-0x7fffffff] [ 0.147223] Switching to clocksource pit [ 0.147474] pnp: PnP ACPI init [ 0.147579] ACPI: bus type PNP registered [ 0.148061] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.148159] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.148253] system 00:00: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.148350] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.149738] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.150242] pnp 00:02: [dma 2] [ 0.150438] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.151816] pnp 00:03: [dma 3] [ 0.152104] pnp 00:03: Plug and Play ACPI device, IDs SMCf010 PNP0511 (active) [ 0.153323] pnp 00:04: [dma 1] [ 0.153698] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.153873] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.153915] pnp 00:06: [dma 4] [ 0.154051] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.154210] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.154377] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.154539] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.154707] pnp 00:0a: Plug and Play ACPI device, IDs SYN0108 SYN0100 SYN0002 PNP0f13 (active) [ 0.155179] system 00:0b: [io 0x0140-0x014f] has been reserved [ 0.155275] system 00:0b: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.155369] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved [ 0.155464] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.156499] system 00:0c: [io 0x04d0-0x04d1] has been reserved [ 0.156593] system 00:0c: [io 0x1000-0x107f] has been reserved [ 0.156684] system 00:0c: [io 0x1100-0x113f] has been reserved [ 0.156775] system 00:0c: [io 0x1200-0x121f] has been reserved [ 0.156866] system 00:0c: [mem 0xfec00000-0xfec000ff] has been reserved [ 0.156960] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.157697] system 00:0d: [mem 0xfec01000-0xfec01fff] has been reserved [ 0.157795] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.157832] pnp: PnP ACPI: found 14 devices [ 0.157914] ACPI: bus type PNP unregistered [ 0.202962] Switching to clocksource acpi_pm [ 0.203108] pci 0000:02:06.0: res[7]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.203119] pci 0000:02:06.0: res[8]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.203130] pci 0000:02:06.1: res[7]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.203139] pci 0000:02:06.1: res[8]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.203149] pci 0000:02:06.3: res[7]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.203158] pci 0000:02:06.3: res[8]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.203171] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 02-05] add_size 1000 [ 0.203184] pci 0000:02:06.0: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.203194] pci 0000:02:06.1: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.203205] pci 0000:02:06.3: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.203217] pci 0000:00:1e.0: bridge window [mem 0x02000000-0x03ffffff pref] to [bus 02-05] add_size c000000 [ 0.203237] pci 0000:00:1e.0: res[9]=[mem 0x02000000-0x03ffffff pref] get_res_add_size add_size c000000 [ 0.203247] pci 0000:00:1e.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.203263] pci 0000:00:1e.0: BAR 9: assigned [mem 0x80000000-0x8dffffff pref] [ 0.204137] pci 0000:00:1e.0: BAR 7: assigned [io 0x4000-0x4fff] [ 0.204231] pci 0000:00:1f.1: BAR 5: assigned [mem 0x8e000000-0x8e0003ff] [ 0.204334] pci 0000:01:00.0: BAR 6: assigned [mem 0x90320000-0x9033ffff pref] [ 0.204458] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.204547] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.204640] pci 0000:00:01.0: bridge window [mem 0x90300000-0x903fffff] [ 0.204734] pci 0000:00:01.0: bridge window [mem 0x98000000-0x9fffffff pref] [ 0.204882] pci 0000:02:06.0: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.204893] pci 0000:02:06.0: res[10]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 [ 0.204903] pci 0000:02:06.1: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.204913] pci 0000:02:06.1: res[10]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 [ 0.204923] pci 0000:02:06.3: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.204932] pci 0000:02:06.3: res[10]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 [ 0.204942] pci 0000:02:06.0: res[7]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.204952] pci 0000:02:06.0: res[8]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.204961] pci 0000:02:06.1: res[7]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.204970] pci 0000:02:06.1: res[8]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.204980] pci 0000:02:06.3: res[7]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.204989] pci 0000:02:06.3: res[8]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.204999] pci 0000:02:06.0: BAR 9: assigned [mem 0x80000000-0x83ffffff pref] [ 0.205128] pci 0000:02:06.0: BAR 10: assigned [mem 0x94000000-0x97ffffff] [ 0.205222] pci 0000:02:06.1: BAR 9: assigned [mem 0x84000000-0x87ffffff pref] [ 0.205351] pci 0000:02:06.1: BAR 10: assigned [mem 0xa4000000-0xa7ffffff] [ 0.205444] pci 0000:02:06.3: BAR 9: assigned [mem 0x88000000-0x8bffffff pref] [ 0.205572] pci 0000:02:06.3: BAR 10: assigned [mem 0xa8000000-0xabffffff] [ 0.205666] pci 0000:02:0e.0: BAR 6: assigned [mem 0x8c000000-0x8c00ffff pref] [ 0.205791] pci 0000:02:06.0: BAR 7: assigned [io 0x4000-0x40ff] [ 0.205881] pci 0000:02:06.0: BAR 8: assigned [io 0x4400-0x44ff] [ 0.205971] pci 0000:02:06.1: BAR 7: assigned [io 0x4800-0x48ff] [ 0.206099] pci 0000:02:06.1: BAR 8: assigned [io 0x4c00-0x4cff] [ 0.206193] pci 0000:02:06.3: BAR 7: assigned [io 0x1400-0x14ff] [ 0.206287] pci 0000:02:06.3: BAR 8: assigned [io 0x1800-0x18ff] [ 0.206383] pci 0000:02:06.0: CardBus bridge to [bus 03-04] [ 0.206472] pci 0000:02:06.0: bridge window [io 0x4000-0x40ff] [ 0.206565] pci 0000:02:06.0: bridge window [io 0x4400-0x44ff] [ 0.206658] pci 0000:02:06.0: bridge window [mem 0x80000000-0x83ffffff pref] [ 0.206808] pci 0000:02:06.0: bridge window [mem 0x94000000-0x97ffffff] [ 0.206904] pci 0000:02:06.1: CardBus bridge to [bus 05-08] [ 0.206992] pci 0000:02:06.1: bridge window [io 0x4800-0x48ff] [ 0.207085] pci 0000:02:06.1: bridge window [io 0x4c00-0x4cff] [ 0.207178] pci 0000:02:06.1: bridge window [mem 0x84000000-0x87ffffff pref] [ 0.207306] pci 0000:02:06.1: bridge window [mem 0xa4000000-0xa7ffffff] [ 0.207400] pci 0000:02:06.3: CardBus bridge to [bus 09-0c] [ 0.207489] pci 0000:02:06.3: bridge window [io 0x1400-0x14ff] [ 0.207581] pci 0000:02:06.3: bridge window [io 0x1800-0x18ff] [ 0.207675] pci 0000:02:06.3: bridge window [mem 0x88000000-0x8bffffff pref] [ 0.207802] pci 0000:02:06.3: bridge window [mem 0xa8000000-0xabffffff] [ 0.207896] pci 0000:00:1e.0: PCI bridge to [bus 02-05] [ 0.207985] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff] [ 0.208080] pci 0000:00:1e.0: bridge window [mem 0x90000000-0x902fffff] [ 0.208175] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x8dffffff pref] [ 0.208322] pci 0000:00:1e.0: setting latency timer to 64 [ 0.208875] ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 10 [ 0.208966] PCI: setting IRQ 10 as level-triggered [ 0.209296] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.209306] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.209316] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.209325] pci_bus 0000:01: resource 1 [mem 0x90300000-0x903fffff] [ 0.209334] pci_bus 0000:01: resource 2 [mem 0x98000000-0x9fffffff pref] [ 0.209344] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.209353] pci_bus 0000:02: resource 1 [mem 0x90000000-0x902fffff] [ 0.209362] pci_bus 0000:02: resource 2 [mem 0x80000000-0x8dffffff pref] [ 0.209370] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 0.209379] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff] [ 0.209388] pci_bus 0000:03: resource 0 [io 0x4000-0x40ff] [ 0.209397] pci_bus 0000:03: resource 1 [io 0x4400-0x44ff] [ 0.209406] pci_bus 0000:03: resource 2 [mem 0x80000000-0x83ffffff pref] [ 0.209415] pci_bus 0000:03: resource 3 [mem 0x94000000-0x97ffffff] [ 0.209424] pci_bus 0000:05: resource 0 [io 0x4800-0x48ff] [ 0.209432] pci_bus 0000:05: resource 1 [io 0x4c00-0x4cff] [ 0.209441] pci_bus 0000:05: resource 2 [mem 0x84000000-0x87ffffff pref] [ 0.209450] pci_bus 0000:05: resource 3 [mem 0xa4000000-0xa7ffffff] [ 0.209459] pci_bus 0000:09: resource 0 [io 0x1400-0x14ff] [ 0.209468] pci_bus 0000:09: resource 1 [io 0x1800-0x18ff] [ 0.209477] pci_bus 0000:09: resource 2 [mem 0x88000000-0x8bffffff pref] [ 0.209485] pci_bus 0000:09: resource 3 [mem 0xa8000000-0xabffffff] [ 0.209578] NET: Registered protocol family 2 [ 0.210110] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.210329] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.210487] TCP: Hash tables configured (established 8192 bind 8192) [ 0.210622] TCP: reno registered [ 0.210705] UDP hash table entries: 512 (order: 1, 8192 bytes) [ 0.210809] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) [ 0.211005] NET: Registered protocol family 1 [ 0.211603] ACPI: PCI Interrupt Link [C0C1] enabled at IRQ 10 [ 0.212310] ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 10 [ 0.213310] ACPI: PCI Interrupt Link [C0C8] enabled at IRQ 10 [ 0.213669] pci 0000:01:00.0: Boot video device [ 0.213704] PCI: CLS 64 bytes, default 64 [ 0.214486] microcode: CPU0 sig=0x695, pf=0x20, revision=0x5 [ 0.214705] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.214835] Scanning for low memory corruption every 60 seconds [ 0.215719] audit: initializing netlink socket (disabled) [ 0.215824] type=2000 audit(1366237469.213:1): initialized [ 0.216811] bounce pool size: 64 pages [ 0.216904] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.228009] msgmni has been set to 1729 [ 0.228748] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.228877] io scheduler noop registered [ 0.228959] io scheduler deadline registered [ 0.229191] io scheduler cfq registered (default) [ 0.229383] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.229468] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.232692] ACPI: AC Adapter [C134] (off-line) [ 0.233491] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.233627] ACPI: Sleep Button [C139] [ 0.233903] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.234110] ACPI: Lid Switch [C138] [ 0.234395] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.234524] ACPI: Power Button [PWRF] [ 0.234922] ACPI: Fan [C20F] (off) [ 0.235195] ACPI: Fan [C210] (off) [ 0.235472] ACPI: Fan [C211] (off) [ 0.235741] ACPI: Fan [C212] (off) [ 0.235975] ACPI: Requesting acpi_cpufreq [ 0.236206] tsc: Marking TSC unstable due to TSC halts in idle [ 0.236307] ACPI: acpi_idle registered with cpuidle [ 0.253894] step_wise_throttle for zone 0, trip 1 [ 0.253983] step_wise trips update [ 0.254063] trip temp 100000, type 1 [ 0.254143] trend 2 [ 0.254219] temperature 42000, throttle 0 [ 0.254300] get_target_state: cur_state 0 [ 0.254381] old_target -1, target -1 [ 0.254462] cdev_update: cdev 4, zone 0, target -1 [ 0.254546] set cdev 4 to state 0 [ 0.254626] step_wise_throttle for zone 0, trip 2 [ 0.254708] step_wise trips update [ 0.254788] trip temp 80000, type 0 [ 0.254867] trend 2 [ 0.254943] temperature 42000, throttle 0 [ 0.255089] get_target_state: cur_state 0 [ 0.255172] old_target -1, target -1 [ 0.255252] cdev_update: cdev 0, zone 0, target -1 [ 0.255336] set cdev 0 to state 0 [ 0.255415] step_wise_throttle for zone 0, trip 3 [ 0.255497] step_wise trips update [ 0.255577] trip temp 65000, type 0 [ 0.255656] trend 2 [ 0.255731] temperature 42000, throttle 0 [ 0.255872] get_target_state: cur_state 0 [ 0.255954] old_target -1, target -1 [ 0.256035] cdev_update: cdev 1, zone 0, target -1 [ 0.256118] set cdev 1 to state 0 [ 0.256198] step_wise_throttle for zone 0, trip 4 [ 0.256280] step_wise trips update [ 0.256359] trip temp 55000, type 0 [ 0.256437] trend 2 [ 0.256513] temperature 42000, throttle 0 [ 0.256652] get_target_state: cur_state 0 [ 0.256786] old_target -1, target -1 [ 0.256868] cdev_update: cdev 2, zone 0, target -1 [ 0.256952] set cdev 2 to state 0 [ 0.257031] step_wise_throttle for zone 0, trip 5 [ 0.257113] step_wise trips update [ 0.257192] trip temp 45000, type 0 [ 0.257271] trend 2 [ 0.257346] temperature 42000, throttle 0 [ 0.257491] get_target_state: cur_state 0 [ 0.257574] old_target -1, target -1 [ 0.257654] cdev_update: cdev 3, zone 0, target -1 [ 0.257737] set cdev 3 to state 0 [ 0.257830] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.257917] ACPI: Thermal Zone [TZ1] (42 C) [ 0.272534] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.272624] ACPI: Thermal Zone [TZ2] (47 C) [ 0.285928] step_wise_throttle for zone 2, trip 1 [ 0.286014] step_wise trips update [ 0.286095] trip temp 60000, type 1 [ 0.286174] trend 2 [ 0.286249] temperature 29300, throttle 0 [ 0.286330] get_target_state: cur_state 0 [ 0.286411] old_target -1, target -1 [ 0.286491] cdev_update: cdev 4, zone 0, target -1 [ 0.286575] cdev_update: cdev 4, zone 2, target -1 [ 0.286658] set cdev 4 to state 0 [ 0.286776] thermal LNXTHERM:02: registered as thermal_zone2 [ 0.286864] ACPI: Thermal Zone [TZ3] (29 C) [ 0.288101] Linux agpgart interface v0.103 [ 0.288291] agpgart-intel 0000:00:00.0: Intel 855PM Chipset [ 0.305135] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000 [ 0.305456] [drm] Initialized drm 1.1.0 20060810 [ 0.305706] [drm] radeon kernel modesetting enabled. [ 0.307061] [drm] initializing kernel modesetting (RV350 0x1002:0x4E50 0x103C:0x0890). [ 0.307226] [drm] register mmio base: 0x90300000 [ 0.307309] [drm] register mmio size: 65536 [ 0.307711] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 0.307847] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 0.307983] radeon 0000:01:00.0: putting AGP V2 device into 4x mode [ 0.308122] radeon 0000:01:00.0: GTT: 256M 0xB0000000 - 0xBFFFFFFF [ 0.308212] [drm] Generation 2 PCI interface, using max accessible memory [ 0.308310] radeon 0000:01:00.0: VRAM: 128M 0x0000000098000000 - 0x000000009FFFFFFF (32M used) [ 0.308455] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.308543] [drm] Driver supports precise vblank timestamp query. [ 0.308644] [drm] radeon: irq initialized. [ 0.309204] [drm] Detected VRAM RAM=128M, BAR=128M [ 0.309296] [drm] RAM width 64bits DDR [ 0.309530] [TTM] Zone kernel: Available graphics memory: 442626 kiB [ 0.309657] [TTM] Zone highmem: Available graphics memory: 1036454 kiB [ 0.309745] [TTM] Initializing pool allocator [ 0.309879] [drm] radeon: 32M of VRAM memory ready [ 0.313148] [drm] radeon: 256M of GTT memory ready. [ 0.313288] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 0.315252] radeon 0000:01:00.0: WB disabled [ 0.315353] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xf8018000 [ 0.315723] [drm] Loading R300 Microcode [ 0.316501] [drm] radeon: ring at 0x00000000B0001000 [ 0.316643] [drm] ring test succeeded in 1 usecs [ 0.317347] [drm] ib test succeeded in 0 usecs [ 0.318250] [drm] Panel ID String: AUO [ 0.318340] [drm] Panel Size 1024x768 [ 0.318653] [drm] No TV DAC info found in BIOS [ 0.339324] [drm] radeon legacy LVDS backlight initialized [ 0.339415] [drm] Radeon Display Connectors [ 0.339496] [drm] Connector 0: [ 0.339575] [drm] VGA-1 [ 0.339654] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 0.339740] [drm] Encoders: [ 0.339817] [drm] CRT1: INTERNAL_DAC1 [ 0.339897] [drm] Connector 1: [ 0.339975] [drm] DVI-D-1 [ 0.340122] ACPI: Battery Slot [C137] (battery present) [ 0.340432] ACPI: Battery Slot [C136] (battery absent) [ 0.340749] [drm] HPD1 [ 0.340831] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 0.340916] [drm] Encoders: [ 0.340993] [drm] DFP1: INTERNAL_TMDS1 [ 0.341074] [drm] Connector 2: [ 0.341152] [drm] LVDS-1 [ 0.341231] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68 [ 0.341316] [drm] Encoders: [ 0.341393] [drm] LCD1: INTERNAL_LVDS [ 0.341473] [drm] Connector 3: [ 0.341551] [drm] SVIDEO-1 [ 0.341627] [drm] Encoders: [ 0.341704] [drm] TV1: INTERNAL_DAC2 [ 0.341807] [drm] radeon: power management initialized [ 0.411282] [drm] fb mappable at 0x98040000 [ 0.411366] [drm] vram apper at 0x98000000 [ 0.411447] [drm] size 786432 [ 0.411524] [drm] fb depth is 8 [ 0.411601] [drm] pitch is 1024 [ 0.411846] fbcon: radeondrmfb (fb0) is primary device [ 0.454095] Console: switching to colour frame buffer device 128x48 [ 0.459317] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 0.459398] radeon 0000:01:00.0: registered panic notifier [ 0.459478] [drm] Initialized radeon 2.30.0 20080528 for 0000:01:00.0 on minor 0 [ 0.460000] ata_piix 0000:00:1f.1: version 2.13 [ 0.460052] ata_piix 0000:00:1f.1: quirky BIOS, skipping spindown on poweroff and hibernation [ 0.460173] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.460505] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.461695] scsi0 : ata_piix [ 0.462641] scsi1 : ata_piix [ 0.463431] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x3c20 irq 14 [ 0.463527] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3c28 irq 15 [ 0.464077] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:0890] [ 0.464190] yenta_cardbus 0000:02:06.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off' [ 0.623695] ata1.00: ATA-6: WDC WD600UE-00HCT0, 09.07D09, max UDMA/100 [ 0.623784] ata1.00: 117210240 sectors, multi 16: LBA [ 0.624293] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4241N, 0C29, max MWDMA2 [ 0.630233] ata1.00: configured for UDMA/100 [ 0.630517] scsi 0:0:0:0: Direct-Access ATA WDC WD600UE-00HC 09.0 PQ: 0 ANSI: 5 [ 0.631372] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 0.631589] sd 0:0:0:0: [sda] Write Protect is off [ 0.631661] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.631718] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.636896] ata2.00: configured for MWDMA2 [ 0.643111] sda: sda1 sda2 sda3 [ 0.646855] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.649671] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4241N 0C29 PQ: 0 ANSI: 5 [ 0.658659] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 0.661519] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.664758] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 0.790866] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x08b8, PCI irq 10 [ 0.793780] yenta_cardbus 0000:02:06.0: Socket status: 30000006 [ 0.796649] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io 0x4000-0x4fff] [ 0.799608] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x90000000-0x902fffff] [ 0.802557] pcmcia_socket pcmcia_socket0: cs: memory probe 0x90000000-0x902fffff: [ 0.805546] excluding 0x90000000-0x9002ffff 0x90060000-0x9008ffff 0x900f0000-0x9011ffff 0x90180000-0x901affff 0x901e0000-0x9020ffff 0x90270000-0x9029ffff [ 0.811842] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x8dffffff pref] [ 0.815103] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x8dffffff: [ 0.818419] excluding 0x80000000-0x8dffffff [ 0.822341] yenta_cardbus 0000:02:06.1: CardBus bridge found [103c:0890] [ 0.950904] yenta_cardbus 0000:02:06.1: ISA IRQ mask 0x08b8, PCI irq 10 [ 0.954307] yenta_cardbus 0000:02:06.1: Socket status: 30000006 [ 0.957718] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #05 to #08 [ 0.961202] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [io 0x4000-0x4fff] [ 0.964756] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [mem 0x90000000-0x902fffff] [ 0.968292] pcmcia_socket pcmcia_socket1: cs: memory probe 0x90000000-0x902fffff: [ 0.971865] excluding 0x90000000-0x9002ffff 0x90060000-0x9008ffff 0x900f0000-0x9011ffff 0x90180000-0x901affff 0x901e0000-0x9020ffff 0x90270000-0x9029ffff [ 0.979359] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [mem 0x80000000-0x8dffffff pref] [ 0.983241] pcmcia_socket pcmcia_socket1: cs: memory probe 0x80000000-0x8dffffff: [ 0.987140] excluding 0x80000000-0x8dffffff [ 0.991607] yenta_cardbus 0000:02:06.3: CardBus bridge found [103c:0890] [ 1.120939] yenta_cardbus 0000:02:06.3: ISA IRQ mask 0x08b8, PCI irq 10 [ 1.124811] yenta_cardbus 0000:02:06.3: Socket status: 30000006 [ 1.128633] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #08 to #0c [ 1.132545] yenta_cardbus 0000:02:06.3: pcmcia: parent PCI bridge window: [io 0x4000-0x4fff] [ 1.136442] yenta_cardbus 0000:02:06.3: pcmcia: parent PCI bridge window: [mem 0x90000000-0x902fffff] [ 1.140369] pcmcia_socket pcmcia_socket2: cs: memory probe 0x90000000-0x902fffff: [ 1.144285] excluding 0x90000000-0x9002ffff 0x90060000-0x9008ffff 0x900f0000-0x9011ffff 0x90180000-0x901affff 0x901e0000-0x9020ffff 0x90270000-0x9029ffff [ 1.152464] yenta_cardbus 0000:02:06.3: pcmcia: parent PCI bridge window: [mem 0x80000000-0x8dffffff pref] [ 1.156570] pcmcia_socket pcmcia_socket2: cs: memory probe 0x80000000-0x8dffffff: [ 1.160638] excluding 0x80000000-0x8dffffff [ 1.165649] i8042: PNP: PS/2 Controller [PNP0303:C192,PNP0f13:C193] at 0x60,0x64 irq 1,12 [ 1.171573] i8042: Detected active multiplexing controller, rev 1.1 [ 1.176397] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.180577] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.184697] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.188771] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.192760] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.196986] mousedev: PS/2 mouse device common for all mice [ 1.200916] rtc_cmos 00:08: RTC can wake from S4 [ 1.204933] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 1.208759] rtc_cmos 00:08: alarms up to one month, y3k, 114 bytes nvram [ 1.212664] cpuidle: using governor ladder [ 1.216528] cpuidle: using governor menu [ 1.220498] TCP: cubic registered [ 1.224126] NET: Registered protocol family 17 [ 1.236488] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.258154] EXT3-fs (sda3): mounted filesystem with ordered data mode [ 1.261581] kjournald starting. Commit interval 5 seconds [ 1.264996] VFS: Mounted root (ext3 filesystem) readonly on device 8:3. [ 1.268373] Freeing unused kernel memory: 312k freed [ 1.271869] Write protecting the kernel text: 4012k [ 1.275109] Write protecting the kernel read-only data: 1308k [ 4.281115] cat (618) used greatest stack depth: 6636 bytes left [ 4.621776] gzip (620) used greatest stack depth: 6008 bytes left [ 4.741200] init-early.sh (617) used greatest stack depth: 5808 bytes left [ 7.920058] systemd-udevd[714]: starting version 200 [ 9.943019] Floppy drive(s): fd0 is 1.44M [ 9.960826] FDC 0 is a post-1991 82077 [ 9.961635] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.C044.C057.C072 1 (20130117/utaddress-251) [ 9.961656] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.961665] ACPI Warning: 0x00001130-0x0000113f SystemIO conflicts with Region \_SB_.C044.C057.C083 1 (20130117/utaddress-251) [ 9.961679] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.961685] ACPI Warning: 0x00001100-0x0000112f SystemIO conflicts with Region \_SB_.C044.C057.C083 1 (20130117/utaddress-251) [ 9.961697] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.961703] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 9.962464] wmi: Mapper loaded [ 9.979952] parport_pc 00:04: reported by Plug and Play ACPI [ 9.980059] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 9.997496] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 10.003066] ACPI: bus type USB registered [ 10.003148] usbcore: registered new interface driver usbfs [ 10.003192] usbcore: registered new interface driver hub [ 10.006900] usbcore: registered new device driver usb [ 10.056538] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.058393] uhci_hcd: USB Universal Host Controller Interface driver [ 10.058689] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 10.058701] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 10.058722] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 10.058771] uhci_hcd 0000:00:1d.0: irq 10, io base 0x000038c0 [ 10.059908] ehci-pci: EHCI PCI platform driver [ 10.081486] hub 1-0:1.0: USB hub found [ 10.081505] hub 1-0:1.0: 2 ports detected [ 10.081969] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 10.081981] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 10.081999] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 10.082041] uhci_hcd 0000:00:1d.1: irq 10, io base 0x000038e0 [ 10.082431] hub 2-0:1.0: USB hub found [ 10.082447] hub 2-0:1.0: 2 ports detected [ 10.082877] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 10.082889] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 10.082906] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3 [ 10.082932] ehci-pci 0000:00:1d.7: debug port 1 [ 10.093387] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 10.093412] ehci-pci 0000:00:1d.7: irq 10, io mem 0xa0000000 [ 10.103377] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 10.103735] hub 3-0:1.0: USB hub found [ 10.103752] hub 3-0:1.0: 6 ports detected [ 10.104745] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 10.104757] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 10.104789] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 10.104831] uhci_hcd 0000:00:1d.2: irq 10, io base 0x00003c00 [ 10.105223] hub 4-0:1.0: USB hub found [ 10.105238] hub 4-0:1.0: 2 ports detected [ 10.114014] 00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 10.160034] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A [ 10.384968] NET: Registered protocol family 23 [ 10.420086] ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 11 [ 10.420098] PCI: setting IRQ 11 as level-triggered [ 10.420111] ACPI Warning: 0x00001200-0x0000121f SystemIO conflicts with Region \_SB_.C044.C057.C087 1 (20130117/utaddress-251) [ 10.420129] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.441164] Detected unconfigured HP nc6000 family SMSC IrDA chip, pre-configuring device. [ 10.441174] Setting up Intel 82801 controller and SMSC device [ 10.441344] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x004e): LPC47N227 [ 10.441367] smsc_superio_flat(): fir: 0x130, sir: 0x2f8, dma: 03, irq: 5, mode: 0x0e [ 10.441388] SMsC IrDA Controller found IrCC version 2.0, firport 0x130, sirport 0x2f8 dma=3, irq=5 [ 10.441580] No transceiver found. Defaulting to Fast pin select [ 10.443448] IrDA: Registered device irda0 [ 10.617723] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 10.960940] snd_intel8x0 0000:00:1f.5: setting latency timer to 64 [ 11.089410] pps_core: LinuxPPS API ver. 1 registered [ 11.089422] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 11.090559] PTP clock support registered [ 11.115244] tg3.c:v3.130 (February 14, 2013) [ 11.115821] ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 11 [ 11.149039] cfg80211: Calling CRDA to update world regulatory domain [ 11.235394] tg3 0000:02:0e.0 eth0: Tigon3 [partno(BMC5705mA3) rev 3003] (PCI:33MHz:32-bit) MAC address 00:08:02:e8:a4:81 [ 11.235402] tg3 0000:02:0e.0 eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0], EEE[0]) [ 11.235407] tg3 0000:02:0e.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 11.235411] tg3 0000:02:0e.0 eth0: dma_rwctrl[763f0000] dma_mask[64-bit] [ 11.265882] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 11.265917] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060) [ 11.266339] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 11.382839] psmouse serio4: synaptics: Touchpad model: 1, fw: 5.9, id: 0x1b6eb1, caps: 0xa84793/0x100000/0x0, board id: 71, fw id: 7550 [ 11.382860] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 [ 11.426632] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5 [ 11.884399] ACPI: PCI Interrupt Link [C0C6] enabled at IRQ 11 [ 11.884509] ath5k 0000:02:04.0: registered as 'phy0' [ 11.890047] intel8x0_measure_ac97_clock: measured 53264 usecs (11 samples) [ 11.890055] intel8x0: measured clock 206 rejected [ 11.947718] systemd-udevd[734]: renamed network interface eth0 to enp2s14 [ 12.086979] pnp 00:03: disabled [ 12.095125] pnp 00:03: activated [ 12.204887] ath: EEPROM regdomain: 0x60 [ 12.204898] ath: EEPROM indicates we should expect a direct regpair map [ 12.204909] ath: Country alpha2 being used: 00 [ 12.204914] ath: Regpair used: 0x60 [ 12.246720] intel8x0_measure_ac97_clock: measured 53287 usecs (2568 samples) [ 12.246731] intel8x0: clocking to 48000 [ 12.474699] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 12.475337] ath5k: phy0: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41) [ 12.475348] ath5k: phy0: RF5111 5GHz radio found (0x17) [ 12.475355] ath5k: phy0: RF2111 2GHz radio found (0x23) [ 12.479310] systemd-udevd[734]: renamed network interface wlan0 to wlp2s4 [ 12.482111] snd_intel8x0m 0000:00:1f.6: setting latency timer to 64 [ 14.150218] cfg80211: World regulatory domain updated: [ 14.150232] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.150241] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.150250] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.150257] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.150265] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.150273] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.198240] psmouse serio5: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 15.276389] loop: module loaded [ 16.611313] EXT3-fs (sda3): using internal journal [ 17.091684] Adding 524660k swap on /dev/sda2. Priority:-1 extents:1 across:524660k [ 17.877586] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input6 [ 19.358459] microcode: CPU0 sig=0x695, pf=0x20, revision=0x5 [ 19.358524] microcode: CPU0 updated to revision 0x7, date = 2004-11-09 [ 20.909018] sort (1324) used greatest stack depth: 5784 bytes left [ 21.231339] udevd (735) used greatest stack depth: 5744 bytes left [ 24.923431] ip (1516) used greatest stack depth: 5216 bytes left [ 28.501695] wlp2s4: authenticate with 1c:af:f7:27:a6:8c [ 28.514544] wlp2s4: send auth to 1c:af:f7:27:a6:8c (try 1/3) [ 28.516022] wlp2s4: authenticated [ 28.516792] wlp2s4: associate with 1c:af:f7:27:a6:8c (try 1/3) [ 28.519100] wlp2s4: RX AssocResp from 1c:af:f7:27:a6:8c (capab=0xc31 status=0 aid=1) [ 28.519872] wlp2s4: associated [ 28.519935] cfg80211: Calling CRDA for country: GB [ 28.549799] ath: regdomain 0x833a updated by CountryIE [ 28.549812] ath: EEPROM regdomain: 0x833a [ 28.549817] ath: EEPROM indicates we should expect a country code [ 28.549824] ath: doing EEPROM country->regdmn map search [ 28.549830] ath: country maps to regdmn code: 0x37 [ 28.549836] ath: Country alpha2 being used: GB [ 28.549841] ath: Regpair used: 0x37 [ 28.549847] cfg80211: Regulatory domain changed to country: GB [ 28.549852] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 28.549860] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 28.549868] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 28.549875] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 28.549881] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 28.549889] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 51.162951] cfg80211: Calling CRDA for country: FI [ 51.177954] cfg80211: Current regulatory domain intersected: [ 51.177967] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 51.177976] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 51.177983] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 51.177990] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 51.177997] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 51.178004] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 107.674413] step_wise_throttle for zone 0, trip 1 [ 107.674419] step_wise trips update [ 107.674421] trip temp 100000, type 1 [ 107.674424] trend 2 [ 107.674426] temperature 50000, throttle 0 [ 107.674430] get_target_state: cur_state 0 [ 107.674433] old_target -1, target -1 [ 107.674436] cdev_update: cdev 4, zone 0, target -1 [ 107.674438] cdev_update: cdev 4, zone 2, target -1 [ 107.674449] set cdev 4 to state 0 [ 107.674452] step_wise_throttle for zone 0, trip 2 [ 107.674454] step_wise trips update [ 107.674456] trip temp 80000, type 0 [ 107.674458] trend 1 [ 107.674459] temperature 50000, throttle 0 [ 107.674490] get_target_state: cur_state 0 [ 107.674492] old_target -1, target 0 [ 107.674495] cdev_update: cdev 0, zone 0, target 0 [ 107.674497] set cdev 0 to state 0 [ 107.674499] step_wise_throttle for zone 0, trip 3 [ 107.674501] step_wise trips update [ 107.674503] trip temp 65000, type 0 [ 107.674505] trend 1 [ 107.674506] temperature 50000, throttle 0 [ 107.674532] get_target_state: cur_state 0 [ 107.674534] old_target -1, target 0 [ 107.674536] cdev_update: cdev 1, zone 0, target 0 [ 107.674538] set cdev 1 to state 0 [ 107.674540] step_wise_throttle for zone 0, trip 4 [ 107.674542] step_wise trips update [ 107.674544] trip temp 55000, type 0 [ 107.674546] trend 1 [ 107.674548] temperature 50000, throttle 0 [ 107.674572] get_target_state: cur_state 0 [ 107.674574] old_target -1, target 0 [ 107.674577] cdev_update: cdev 2, zone 0, target 0 [ 107.674579] set cdev 2 to state 0 [ 107.674581] step_wise_throttle for zone 0, trip 5 [ 107.674582] step_wise trips update [ 107.674584] trip temp 45000, type 0 [ 107.674586] trend 1 [ 107.674588] temperature 50000, throttle 1 [ 107.674613] get_target_state: cur_state 0 [ 107.674615] old_target -1, target 1 [ 107.674617] cdev_update: cdev 3, zone 0, target 1 [ 107.674683] set cdev 3 to state 1 [ 107.683499] step_wise_throttle for zone 0, trip 1 [ 107.683502] step_wise trips update [ 107.683504] trip temp 100000, type 1 [ 107.683506] trend 2 [ 107.683508] temperature 50000, throttle 0 [ 107.683510] get_target_state: cur_state 0 [ 107.683512] old_target -1, target -1 [ 107.683515] cdev_update: cdev 4, zone 0, target -1 [ 107.683517] cdev_update: cdev 4, zone 2, target -1 [ 107.683525] set cdev 4 to state 0 [ 107.683527] step_wise_throttle for zone 0, trip 2 [ 107.683529] step_wise trips update [ 107.683531] trip temp 80000, type 0 [ 107.683532] trend 2 [ 107.683534] temperature 50000, throttle 0 [ 107.683561] get_target_state: cur_state 0 [ 107.683563] old_target 0, target -1 [ 107.683566] cdev_update: cdev 0, zone 0, target -1 [ 107.683568] set cdev 0 to state 0 [ 107.683570] step_wise_throttle for zone 0, trip 3 [ 107.683572] step_wise trips update [ 107.683574] trip temp 65000, type 0 [ 107.683575] trend 2 [ 107.683577] temperature 50000, throttle 0 [ 107.683602] get_target_state: cur_state 0 [ 107.683604] old_target 0, target -1 [ 107.683606] cdev_update: cdev 1, zone 0, target -1 [ 107.683608] set cdev 1 to state 0 [ 107.683611] step_wise_throttle for zone 0, trip 4 [ 107.683612] step_wise trips update [ 107.683614] trip temp 55000, type 0 [ 107.683616] trend 2 [ 107.683618] temperature 50000, throttle 0 [ 107.683641] get_target_state: cur_state 0 [ 107.683643] old_target 0, target -1 [ 107.683646] cdev_update: cdev 2, zone 0, target -1 [ 107.683648] set cdev 2 to state 0 [ 107.683650] step_wise_throttle for zone 0, trip 5 [ 107.683652] step_wise trips update [ 107.683654] trip temp 40000, type 0 [ 107.683655] trend 2 [ 107.683657] temperature 50000, throttle 1 [ 107.683703] get_target_state: cur_state 1 [ 107.683706] old_target 1, target 0 [ 107.683708] cdev_update: cdev 3, zone 0, target 0 [ 107.683774] set cdev 3 to state 0 [ 108.905509] step_wise_throttle for zone 0, trip 1 [ 108.905515] step_wise trips update [ 108.905518] trip temp 100000, type 1 [ 108.905520] trend 2 [ 108.905522] temperature 56000, throttle 0 [ 108.905527] get_target_state: cur_state 0 [ 108.905530] old_target -1, target -1 [ 108.905533] cdev_update: cdev 4, zone 0, target -1 [ 108.905535] cdev_update: cdev 4, zone 2, target -1 [ 108.905546] set cdev 4 to state 0 [ 108.905549] step_wise_throttle for zone 0, trip 2 [ 108.905550] step_wise trips update [ 108.905552] trip temp 80000, type 0 [ 108.905554] trend 1 [ 108.905556] temperature 56000, throttle 0 [ 108.905587] get_target_state: cur_state 0 [ 108.905589] old_target -1, target 0 [ 108.905592] cdev_update: cdev 0, zone 0, target 0 [ 108.905594] set cdev 0 to state 0 [ 108.905596] step_wise_throttle for zone 0, trip 3 [ 108.905598] step_wise trips update [ 108.905600] trip temp 65000, type 0 [ 108.905602] trend 1 [ 108.905603] temperature 56000, throttle 0 [ 108.905629] get_target_state: cur_state 0 [ 108.905631] old_target -1, target 0 [ 108.905633] cdev_update: cdev 1, zone 0, target 0 [ 108.905635] set cdev 1 to state 0 [ 108.905637] step_wise_throttle for zone 0, trip 4 [ 108.905639] step_wise trips update [ 108.905641] trip temp 55000, type 0 [ 108.905643] trend 1 [ 108.905645] temperature 56000, throttle 1 [ 108.905669] get_target_state: cur_state 0 [ 108.905671] old_target -1, target 1 [ 108.905673] cdev_update: cdev 2, zone 0, target 1 [ 108.905739] set cdev 2 to state 1 [ 108.905742] step_wise_throttle for zone 0, trip 5 [ 108.905743] step_wise trips update [ 108.905745] trip temp 40000, type 0 [ 108.905747] trend 1 [ 108.905749] temperature 56000, throttle 1 [ 108.905774] get_target_state: cur_state 0 [ 108.905776] old_target 0, target 1 [ 108.905779] cdev_update: cdev 3, zone 0, target 1 [ 108.905825] set cdev 3 to state 1 [ 108.916830] step_wise_throttle for zone 0, trip 1 [ 108.916834] step_wise trips update [ 108.916836] trip temp 100000, type 1 [ 108.916838] trend 2 [ 108.916840] temperature 56000, throttle 0 [ 108.916843] get_target_state: cur_state 0 [ 108.916845] old_target -1, target -1 [ 108.916847] cdev_update: cdev 4, zone 0, target -1 [ 108.916849] cdev_update: cdev 4, zone 2, target -1 [ 108.916858] set cdev 4 to state 0 [ 108.916860] step_wise_throttle for zone 0, trip 2 [ 108.916862] step_wise trips update [ 108.916864] trip temp 80000, type 0 [ 108.916865] trend 2 [ 108.916867] temperature 56000, throttle 0 [ 108.916894] get_target_state: cur_state 0 [ 108.916896] old_target 0, target -1 [ 108.916899] cdev_update: cdev 0, zone 0, target -1 [ 108.916901] set cdev 0 to state 0 [ 108.916903] step_wise_throttle for zone 0, trip 3 [ 108.916905] step_wise trips update [ 108.916907] trip temp 65000, type 0 [ 108.916908] trend 2 [ 108.916910] temperature 56000, throttle 0 [ 108.916935] get_target_state: cur_state 0 [ 108.916937] old_target 0, target -1 [ 108.916939] cdev_update: cdev 1, zone 0, target -1 [ 108.916941] set cdev 1 to state 0 [ 108.916943] step_wise_throttle for zone 0, trip 4 [ 108.916945] step_wise trips update [ 108.916947] trip temp 50000, type 0 [ 108.916949] trend 2 [ 108.916951] temperature 56000, throttle 1 [ 108.916997] get_target_state: cur_state 1 [ 108.916999] old_target 1, target 0 [ 108.917002] cdev_update: cdev 2, zone 0, target 0 [ 108.917057] set cdev 2 to state 0 [ 108.917060] step_wise_throttle for zone 0, trip 5 [ 108.917062] step_wise trips update [ 108.917064] trip temp 40000, type 0 [ 108.917065] trend 2 [ 108.917067] temperature 56000, throttle 1 [ 108.917112] get_target_state: cur_state 1 [ 108.917115] old_target 1, target 0 [ 108.917117] cdev_update: cdev 3, zone 0, target 0 [ 108.917181] set cdev 3 to state 0 [ 128.472063] step_wise_throttle for zone 0, trip 1 [ 128.472068] step_wise trips update [ 128.472071] trip temp 100000, type 1 [ 128.472073] trend 2 [ 128.472075] temperature 66000, throttle 0 [ 128.472080] get_target_state: cur_state 0 [ 128.472082] old_target -1, target -1 [ 128.472086] cdev_update: cdev 4, zone 0, target -1 [ 128.472088] cdev_update: cdev 4, zone 2, target -1 [ 128.472099] set cdev 4 to state 0 [ 128.472102] step_wise_throttle for zone 0, trip 2 [ 128.472103] step_wise trips update [ 128.472105] trip temp 80000, type 0 [ 128.472107] trend 1 [ 128.472109] temperature 66000, throttle 0 [ 128.472140] get_target_state: cur_state 0 [ 128.472142] old_target -1, target 0 [ 128.472145] cdev_update: cdev 0, zone 0, target 0 [ 128.472147] set cdev 0 to state 0 [ 128.472149] step_wise_throttle for zone 0, trip 3 [ 128.472151] step_wise trips update [ 128.472153] trip temp 65000, type 0 [ 128.472155] trend 1 [ 128.472156] temperature 66000, throttle 1 [ 128.472181] get_target_state: cur_state 0 [ 128.472184] old_target -1, target 1 [ 128.472186] cdev_update: cdev 1, zone 0, target 1 [ 128.472252] set cdev 1 to state 1 [ 128.472255] step_wise_throttle for zone 0, trip 4 [ 128.472256] step_wise trips update [ 128.472258] trip temp 50000, type 0 [ 128.472260] trend 1 [ 128.472262] temperature 66000, throttle 1 [ 128.472287] get_target_state: cur_state 0 [ 128.472289] old_target 0, target 1 [ 128.472292] cdev_update: cdev 2, zone 0, target 1 [ 128.472338] set cdev 2 to state 1 [ 128.472341] step_wise_throttle for zone 0, trip 5 [ 128.472342] step_wise trips update [ 128.472344] trip temp 40000, type 0 [ 128.472346] trend 1 [ 128.472348] temperature 66000, throttle 1 [ 128.472373] get_target_state: cur_state 0 [ 128.472375] old_target 0, target 1 [ 128.472377] cdev_update: cdev 3, zone 0, target 1 [ 128.472423] set cdev 3 to state 1 [ 128.480166] step_wise_throttle for zone 0, trip 1 [ 128.480169] step_wise trips update [ 128.480171] trip temp 100000, type 1 [ 128.480173] trend 2 [ 128.480175] temperature 66000, throttle 0 [ 128.480178] get_target_state: cur_state 0 [ 128.480180] old_target -1, target -1 [ 128.480182] cdev_update: cdev 4, zone 0, target -1 [ 128.480184] cdev_update: cdev 4, zone 2, target -1 [ 128.480192] set cdev 4 to state 0 [ 128.480194] step_wise_throttle for zone 0, trip 2 [ 128.480195] step_wise trips update [ 128.480197] trip temp 80000, type 0 [ 128.480199] trend 2 [ 128.480201] temperature 66000, throttle 0 [ 128.480228] get_target_state: cur_state 0 [ 128.480230] old_target 0, target -1 [ 128.480232] cdev_update: cdev 0, zone 0, target -1 [ 128.480235] set cdev 0 to state 0 [ 128.480237] step_wise_throttle for zone 0, trip 3 [ 128.480238] step_wise trips update [ 128.480240] trip temp 60000, type 0 [ 128.480242] trend 2 [ 128.480244] temperature 66000, throttle 1 [ 128.480291] get_target_state: cur_state 1 [ 128.480293] old_target 1, target 0 [ 128.480295] cdev_update: cdev 1, zone 0, target 0 [ 128.480351] set cdev 1 to state 0 [ 128.480354] step_wise_throttle for zone 0, trip 4 [ 128.480356] step_wise trips update [ 128.480358] trip temp 50000, type 0 [ 128.480359] trend 2 [ 128.480361] temperature 66000, throttle 1 [ 128.480407] get_target_state: cur_state 1 [ 128.480409] old_target 1, target 0 [ 128.480411] cdev_update: cdev 2, zone 0, target 0 [ 128.480466] set cdev 2 to state 0 [ 128.480468] step_wise_throttle for zone 0, trip 5 [ 128.480470] step_wise trips update [ 128.480472] trip temp 40000, type 0 [ 128.480473] trend 2 [ 128.480475] temperature 66000, throttle 1 [ 128.480520] get_target_state: cur_state 1 [ 128.480522] old_target 1, target 0 [ 128.480525] cdev_update: cdev 3, zone 0, target 0 [ 128.480589] set cdev 3 to state 0 [ 165.165630] step_wise_throttle for zone 0, trip 1 [ 165.165640] step_wise trips update [ 165.165647] trip temp 100000, type 1 [ 165.165652] trend 2 [ 165.165658] temperature 60000, throttle 0 [ 165.165666] get_target_state: cur_state 0 [ 165.165672] old_target -1, target -1 [ 165.165679] cdev_update: cdev 4, zone 0, target -1 [ 165.165685] cdev_update: cdev 4, zone 2, target -1 [ 165.165705] set cdev 4 to state 0 [ 165.165711] step_wise_throttle for zone 0, trip 2 [ 165.165715] step_wise trips update [ 165.165721] trip temp 80000, type 0 [ 165.165725] trend 2 [ 165.165730] temperature 60000, throttle 0 [ 165.165805] get_target_state: cur_state 0 [ 165.165811] old_target -1, target -1 [ 165.165818] cdev_update: cdev 0, zone 0, target -1 [ 165.165824] set cdev 0 to state 0 [ 165.165830] step_wise_throttle for zone 0, trip 3 [ 165.165834] step_wise trips update [ 165.165839] trip temp 60000, type 0 [ 165.165844] trend 2 [ 165.165849] temperature 60000, throttle 1 [ 165.165914] get_target_state: cur_state 0 [ 165.165920] old_target 0, target 0 [ 165.165926] cdev_update: cdev 1, zone 0, target 0 [ 165.165932] set cdev 1 to state 0 [ 165.165937] step_wise_throttle for zone 0, trip 4 [ 165.165942] step_wise trips update [ 165.165947] trip temp 50000, type 0 [ 165.165951] trend 2 [ 165.165957] temperature 60000, throttle 1 [ 165.166019] get_target_state: cur_state 0 [ 165.166025] old_target 0, target 0 [ 165.166031] cdev_update: cdev 2, zone 0, target 0 [ 165.166037] set cdev 2 to state 0 [ 165.166042] step_wise_throttle for zone 0, trip 5 [ 165.166047] step_wise trips update [ 165.166052] trip temp 40000, type 0 [ 165.166057] trend 2 [ 165.166062] temperature 60000, throttle 1 [ 165.166124] get_target_state: cur_state 0 [ 165.166130] old_target 0, target 0 [ 165.166136] cdev_update: cdev 3, zone 0, target 0 [ 165.166141] set cdev 3 to state 0 [ 165.173261] step_wise_throttle for zone 0, trip 1 [ 165.173268] step_wise trips update [ 165.173274] trip temp 100000, type 1 [ 165.173279] trend 2 [ 165.173285] temperature 60000, throttle 0 [ 165.173291] get_target_state: cur_state 0 [ 165.173297] old_target -1, target -1 [ 165.173303] cdev_update: cdev 4, zone 0, target -1 [ 165.173309] cdev_update: cdev 4, zone 2, target -1 [ 165.174450] set cdev 4 to state 0 [ 165.174459] step_wise_throttle for zone 0, trip 2 [ 165.174461] step_wise trips update [ 165.174463] trip temp 80000, type 0 [ 165.174465] trend 2 [ 165.174467] temperature 60000, throttle 0 [ 165.174534] get_target_state: cur_state 0 [ 165.174537] old_target -1, target -1 [ 165.174539] cdev_update: cdev 0, zone 0, target -1 [ 165.174542] set cdev 0 to state 0 [ 165.174544] step_wise_throttle for zone 0, trip 3 [ 165.174546] step_wise trips update [ 165.174548] trip temp 65000, type 0 [ 165.174549] trend 2 [ 165.174551] temperature 60000, throttle 0 [ 165.174577] get_target_state: cur_state 0 [ 165.174579] old_target 0, target -1 [ 165.174582] cdev_update: cdev 1, zone 0, target -1 [ 165.174584] set cdev 1 to state 0 [ 165.174586] step_wise_throttle for zone 0, trip 4 [ 165.174588] step_wise trips update [ 165.174590] trip temp 50000, type 0 [ 165.174591] trend 2 [ 165.174593] temperature 60000, throttle 1 [ 165.174618] get_target_state: cur_state 0 [ 165.174620] old_target 0, target 0 [ 165.174623] cdev_update: cdev 2, zone 0, target 0 [ 165.174625] set cdev 2 to state 0 [ 165.174627] step_wise_throttle for zone 0, trip 5 [ 165.174628] step_wise trips update [ 165.174630] trip temp 40000, type 0 [ 165.174632] trend 2 [ 165.174634] temperature 60000, throttle 1 [ 165.174659] get_target_state: cur_state 0 [ 165.174661] old_target 0, target 0 [ 165.174663] cdev_update: cdev 3, zone 0, target 0 [ 165.174665] set cdev 3 to state 0 [ 227.602797] step_wise_throttle for zone 0, trip 1 [ 227.602807] step_wise trips update [ 227.602814] trip temp 100000, type 1 [ 227.602819] trend 2 [ 227.602825] temperature 50000, throttle 0 [ 227.602833] get_target_state: cur_state 0 [ 227.602839] old_target -1, target -1 [ 227.602846] cdev_update: cdev 4, zone 0, target -1 [ 227.602852] cdev_update: cdev 4, zone 2, target -1 [ 227.602871] set cdev 4 to state 0 [ 227.602877] step_wise_throttle for zone 0, trip 2 [ 227.602882] step_wise trips update [ 227.602887] trip temp 80000, type 0 [ 227.602892] trend 2 [ 227.602897] temperature 50000, throttle 0 [ 227.602972] get_target_state: cur_state 0 [ 227.602978] old_target -1, target -1 [ 227.602984] cdev_update: cdev 0, zone 0, target -1 [ 227.602991] set cdev 0 to state 0 [ 227.602997] step_wise_throttle for zone 0, trip 3 [ 227.603001] step_wise trips update [ 227.603006] trip temp 65000, type 0 [ 227.603011] trend 2 [ 227.603016] temperature 50000, throttle 0 [ 227.603081] get_target_state: cur_state 0 [ 227.603087] old_target -1, target -1 [ 227.603093] cdev_update: cdev 1, zone 0, target -1 [ 227.603099] set cdev 1 to state 0 [ 227.603105] step_wise_throttle for zone 0, trip 4 [ 227.603109] step_wise trips update [ 227.603115] trip temp 50000, type 0 [ 227.603119] trend 2 [ 227.603124] temperature 50000, throttle 1 [ 227.603188] get_target_state: cur_state 0 [ 227.603194] old_target 0, target 0 [ 227.603200] cdev_update: cdev 2, zone 0, target 0 [ 227.603206] set cdev 2 to state 0 [ 227.603211] step_wise_throttle for zone 0, trip 5 [ 227.603216] step_wise trips update [ 227.603221] trip temp 40000, type 0 [ 227.603226] trend 2 [ 227.603231] temperature 50000, throttle 1 [ 227.603294] get_target_state: cur_state 0 [ 227.603299] old_target 0, target 0 [ 227.603305] cdev_update: cdev 3, zone 0, target 0 [ 227.603311] set cdev 3 to state 0 [ 227.610383] step_wise_throttle for zone 0, trip 1 [ 227.610391] step_wise trips update [ 227.610397] trip temp 100000, type 1 [ 227.610402] trend 2 [ 227.610407] temperature 50000, throttle 0 [ 227.610414] get_target_state: cur_state 0 [ 227.610419] old_target -1, target -1 [ 227.610425] cdev_update: cdev 4, zone 0, target -1 [ 227.610431] cdev_update: cdev 4, zone 2, target -1 [ 227.611043] set cdev 4 to state 0 [ 227.611053] step_wise_throttle for zone 0, trip 2 [ 227.611055] step_wise trips update [ 227.611057] trip temp 80000, type 0 [ 227.611059] trend 2 [ 227.611061] temperature 50000, throttle 0 [ 227.611126] get_target_state: cur_state 0 [ 227.611129] old_target -1, target -1 [ 227.611131] cdev_update: cdev 0, zone 0, target -1 [ 227.611133] set cdev 0 to state 0 [ 227.611136] step_wise_throttle for zone 0, trip 3 [ 227.611137] step_wise trips update [ 227.611139] trip temp 65000, type 0 [ 227.611141] trend 2 [ 227.611143] temperature 50000, throttle 0 [ 227.611168] get_target_state: cur_state 0 [ 227.611170] old_target -1, target -1 [ 227.611173] cdev_update: cdev 1, zone 0, target -1 [ 227.611175] set cdev 1 to state 0 [ 227.611177] step_wise_throttle for zone 0, trip 4 [ 227.611178] step_wise trips update [ 227.611180] trip temp 55000, type 0 [ 227.611182] trend 2 [ 227.611184] temperature 50000, throttle 0 [ 227.611208] get_target_state: cur_state 0 [ 227.611211] old_target 0, target -1 [ 227.611213] cdev_update: cdev 2, zone 0, target -1 [ 227.611215] set cdev 2 to state 0 [ 227.611217] step_wise_throttle for zone 0, trip 5 [ 227.611219] step_wise trips update [ 227.611221] trip temp 40000, type 0 [ 227.611223] trend 2 [ 227.611224] temperature 50000, throttle 1 [ 227.611248] get_target_state: cur_state 0 [ 227.611251] old_target 0, target 0 [ 227.611253] cdev_update: cdev 3, zone 0, target 0 [ 227.611255] set cdev 3 to state 0 [ 271.062106] step_wise_throttle for zone 0, trip 1 [ 271.062117] step_wise trips update [ 271.062123] trip temp 100000, type 1 [ 271.062129] trend 2 [ 271.062134] temperature 47000, throttle 0 [ 271.062144] get_target_state: cur_state 0 [ 271.062149] old_target -1, target -1 [ 271.062157] cdev_update: cdev 4, zone 0, target -1 [ 271.062163] cdev_update: cdev 4, zone 2, target -1 [ 271.062785] set cdev 4 to state 0 [ 271.062796] step_wise_throttle for zone 0, trip 2 [ 271.062797] step_wise trips update [ 271.062800] trip temp 80000, type 0 [ 271.062802] trend 2 [ 271.062803] temperature 47000, throttle 0 [ 271.062869] get_target_state: cur_state 0 [ 271.062872] old_target -1, target -1 [ 271.062874] cdev_update: cdev 0, zone 0, target -1 [ 271.062877] set cdev 0 to state 0 [ 271.062879] step_wise_throttle for zone 0, trip 3 [ 271.062880] step_wise trips update [ 271.062882] trip temp 65000, type 0 [ 271.062884] trend 2 [ 271.062886] temperature 47000, throttle 0 [ 271.062911] get_target_state: cur_state 0 [ 271.062914] old_target -1, target -1 [ 271.062916] cdev_update: cdev 1, zone 0, target -1 [ 271.062919] set cdev 1 to state 0 [ 271.062921] step_wise_throttle for zone 0, trip 4 [ 271.062922] step_wise trips update [ 271.062924] trip temp 55000, type 0 [ 271.062926] trend 2 [ 271.062928] temperature 47000, throttle 0 [ 271.062952] get_target_state: cur_state 0 [ 271.062955] old_target -1, target -1 [ 271.062957] cdev_update: cdev 2, zone 0, target -1 [ 271.062959] set cdev 2 to state 0 [ 271.062961] step_wise_throttle for zone 0, trip 5 [ 271.062963] step_wise trips update [ 271.062965] trip temp 40000, type 0 [ 271.062966] trend 2 [ 271.062968] temperature 47000, throttle 1 [ 271.062993] get_target_state: cur_state 0 [ 271.062995] old_target 0, target 0 [ 271.062997] cdev_update: cdev 3, zone 0, target 0 [ 271.062999] set cdev 3 to state 0 [ 271.077600] step_wise_throttle for zone 2, trip 1 [ 271.077603] step_wise trips update [ 271.077605] trip temp 60000, type 1 [ 271.077607] trend 2 [ 271.077609] temperature 29800, throttle 0 [ 271.077612] get_target_state: cur_state 0 [ 271.077614] old_target -1, target -1 [ 271.077617] cdev_update: cdev 4, zone 0, target -1 [ 271.077619] cdev_update: cdev 4, zone 2, target -1 [ 271.078076] set cdev 4 to state 0