[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.0-r1 (root@ss3) (gcc version 4.6.3 (Gentoo 4.6.3 p1.9, pie-0.5.2) ) #1 SMP Mon Feb 25 00:02:26 JST 2013 [ 0.000000] Command line: root=/dev/sda4 drm.debug=0xe [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000aa5cffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aa5d0000-0x00000000aa5d01ff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000aa5d0200-0x00000000aa5d2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000aa5d3000-0x00000000aa6cffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000aa6d0000-0x00000000aa6effff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000aa6f0000-0x00000000af9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024e5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: TOSHIBA dynabook R731/W2UB/Portable PC, BIOS Version 3.90 07/31/2012 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x24e600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 uncachable [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0B0000000 mask FF0000000 uncachable [ 0.000000] 4 base 0AC000000 mask FFC000000 uncachable [ 0.000000] 5 base 0AB800000 mask FFF800000 uncachable [ 0.000000] 6 base 100000000 mask F00000000 write-back [ 0.000000] 7 base 200000000 mask F80000000 write-back [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xab800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xaa5d0 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0xaa5cffff] [ 0.000000] [mem 0x00000000-0xaa3fffff] page 2M [ 0.000000] [mem 0xaa400000-0xaa5cffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xaa5cffff @ [mem 0x1fffb000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x24e5fffff] [ 0.000000] [mem 0x100000000-0x24e5fffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x24e5fffff @ [mem 0xaa5c9000-0xaa5cffff] [ 0.000000] ACPI: RSDP 00000000000f0030 00014 (v00 TOSHIB) [ 0.000000] ACPI: RSDT 00000000aa6ef038 00058 (v01 TOSHIB A007D 00000003 01000013) [ 0.000000] ACPI: FACP 00000000aa6ee000 00081 (v02 TOSHIB A007D 00000003 LOHR 0000005F) [ 0.000000] ACPI: DSDT 00000000aa6dd000 08A46 (v02 TOSHIB A007D 20111220 INTL 20061109) [ 0.000000] ACPI: FACS 00000000aa6ad000 00040 [ 0.000000] ACPI: HPET 00000000aa6ed000 00038 (v01 TOSHIB A007D 00000001 LOHR 0000005F) [ 0.000000] ACPI: APIC 00000000aa6ec000 000BC (v01 TOSHIB A007D 00000001 LOHR 0000005F) [ 0.000000] ACPI: MCFG 00000000aa6eb000 0003C (v01 TOSHIB A007D 00000001 LOHR 0000005F) [ 0.000000] ACPI: ASF! 00000000aa6ea000 000A0 (v32 TOSHIB A007D 00000001 LOHR 0000005F) [ 0.000000] ACPI: TCPA 00000000aa6e9000 00032 (v02 TOSHIB A007D 00000000 LOHR 0000005F) [ 0.000000] ACPI: BOOT 00000000aa6e8000 00028 (v01 TOSHIB A007D 00000000 LOHR 0000005F) [ 0.000000] ACPI: SLIC 00000000aa6e7000 00176 (v01 TOSHIB A007D 00000000 LOHR 0000005F) [ 0.000000] ACPI: SSDT 00000000aa6dc000 00395 (v01 TOSHIB SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000aa6d9000 00720 (v01 TOSHIB PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000aa6d7000 00827 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000aa6d6000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: DMAR 00000000aa6d5000 00110 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000024e5fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x24e5fffff] [ 0.000000] NODE_DATA [mem 0x24e5fc000-0x24e5fffff] [ 0.000000] [ffffea0000000000-ffffea00093fffff] PMD -> [ffff880245c00000-ffff88024dbfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x24e5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xaa5cffff] [ 0.000000] node 0: [mem 0x100000000-0x24e5fffff] [ 0.000000] On node 0 totalpages: 2066270 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 142 pages reserved [ 0.000000] DMA zone: 3776 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10824 pages used for memmap [ 0.000000] DMA32 zone: 681864 pages, LIFO batch:31 [ 0.000000] Normal zone: 21400 pages used for memmap [ 0.000000] Normal zone: 1348200 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0xafa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88024e200000 s82560 r8192 d23936 u262144 [ 0.000000] pcpu-alloc: s82560 r8192 d23936 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2033840 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda4 drm.debug=0xe [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Memory: 8053820k/9672704k available (4422k kernel code, 1407624k absent, 211260k reserved, 6418k data, 648k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2691.465 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5382.93 BogoMIPS (lpj=2691465) [ 0.000202] pid_max: default: 32768 minimum: 301 [ 0.000314] Security Framework initialized [ 0.000409] AppArmor: AppArmor disabled by boot time parameter [ 0.000924] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002914] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003654] Mount-cache hash table entries: 256 [ 0.003903] Initializing cgroup subsys cpuacct [ 0.003997] Initializing cgroup subsys devices [ 0.004092] Initializing cgroup subsys blkio [ 0.004216] CPU: Physical Processor ID: 0 [ 0.004309] CPU: Processor Core ID: 0 [ 0.004403] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.004559] mce: CPU supports 7 MCE banks [ 0.004660] CPU0: Thermal monitoring enabled (TM1) [ 0.004760] process: using mwait in idle threads [ 0.004856] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 tlb_flushall_shift: 5 [ 0.005197] Freeing SMP alternatives: 20k freed [ 0.006241] ACPI: Core revision 20121018 [ 0.024768] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.034854] smpboot: CPU0: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz (fam: 06, model: 2a, stepping: 07) [ 0.035126] TSC deadline timer enabled [ 0.035130] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.035437] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.035585] ... version: 3 [ 0.035678] ... bit width: 48 [ 0.035771] ... generic registers: 4 [ 0.035864] ... value mask: 0000ffffffffffff [ 0.035959] ... max period: 000000007fffffff [ 0.036054] ... fixed-purpose events: 3 [ 0.036149] ... event mask: 000000070000000f [ 0.036411] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.076329] Brought up 4 CPUs [ 0.076509] smpboot: Total of 4 processors activated (21531.72 BogoMIPS) [ 0.080080] devtmpfs: initialized [ 0.080333] PM: Registering ACPI NVS region [mem 0xaa5d0000-0xaa5d01ff] (512 bytes) [ 0.080480] PM: Registering ACPI NVS region [mem 0xaa5d3000-0xaa6cffff] (1036288 bytes) [ 0.080761] RTC time: 0:30:33, date: 04/11/13 [ 0.080896] NET: Registered protocol family 16 [ 0.081276] ACPI: bus type pci registered [ 0.081468] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.081618] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.084628] PCI: Using configuration type 1 for base access [ 0.088308] bio: create slab at 0 [ 0.088481] ACPI: Added _OSI(Module Device) [ 0.088574] ACPI: Added _OSI(Processor Device) [ 0.088668] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.088762] ACPI: Added _OSI(Processor Aggregator Device) [ 0.089877] ACPI: EC: Look up EC in DSDT [ 0.102995] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.104034] ACPI: SSDT 00000000aafd6798 0071E (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.104527] ACPI: Dynamic OEM Table Load: [ 0.104699] ACPI: SSDT (null) 0071E (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.109538] ACPI: SSDT 00000000aafd7a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.110060] ACPI: Dynamic OEM Table Load: [ 0.110233] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.114440] ACPI: SSDT 00000000aafd5d98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.114925] ACPI: Dynamic OEM Table Load: [ 0.115097] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.119853] ACPI: Interpreter enabled [ 0.119949] ACPI: (supports S0 S3 S5) [ 0.120170] ACPI: Using IOAPIC for interrupt routing [ 0.129587] ACPI: Power Resource [PDOC] (off) [ 0.137734] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.137833] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.138153] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.138250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.138392] pci_root PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.138540] pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.139056] PCI host bridge to bus 0000:00 [ 0.139152] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.139248] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.139345] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.139446] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.139544] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.139642] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.139739] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.139837] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff] [ 0.139941] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.139976] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 [ 0.139986] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit] [ 0.139991] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.139995] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f] [ 0.140046] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.140069] pci 0000:00:16.0: reg 10: [mem 0xc4824000-0xc482400f 64bit] [ 0.140143] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.140168] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002 [ 0.140186] pci 0000:00:16.3: reg 10: [io 0x3090-0x3097] [ 0.140195] pci 0000:00:16.3: reg 14: [mem 0xc482b000-0xc482bfff] [ 0.140294] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.140312] pci 0000:00:19.0: reg 10: [mem 0xc4800000-0xc481ffff] [ 0.140321] pci 0000:00:19.0: reg 14: [mem 0xc482a000-0xc482afff] [ 0.140330] pci 0000:00:19.0: reg 18: [io 0x3060-0x307f] [ 0.140393] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.140418] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.140439] pci 0000:00:1a.0: reg 10: [mem 0xc4829000-0xc48293ff] [ 0.140533] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.140559] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.140574] pci 0000:00:1b.0: reg 10: [mem 0xc4820000-0xc4823fff 64bit] [ 0.140642] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.140667] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.140745] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.140770] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.140847] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.140874] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 0.140951] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.140979] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.141056] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.141082] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400 [ 0.141159] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.141185] pci 0000:00:1c.6: [8086:2448] type 01 class 0x060401 [ 0.141262] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.141293] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.141314] pci 0000:00:1d.0: reg 10: [mem 0xc4828000-0xc48283ff] [ 0.141404] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.141430] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100 [ 0.141558] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.141576] pci 0000:00:1f.2: reg 10: [io 0x3088-0x308f] [ 0.141584] pci 0000:00:1f.2: reg 14: [io 0x309c-0x309f] [ 0.141592] pci 0000:00:1f.2: reg 18: [io 0x3080-0x3087] [ 0.141600] pci 0000:00:1f.2: reg 1c: [io 0x3098-0x309b] [ 0.141608] pci 0000:00:1f.2: reg 20: [io 0x3040-0x305f] [ 0.141616] pci 0000:00:1f.2: reg 24: [mem 0xc4827000-0xc48277ff] [ 0.141662] pci 0000:00:1f.2: PME# supported from D3hot [ 0.141905] pci 0000:01:00.0: [1180:e823] type 00 class 0x088001 [ 0.141923] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. [ 0.142212] pci 0000:01:00.0: reg 10: [mem 0xc4700000-0xc47000ff] [ 0.142409] pci 0000:01:00.0: supports D1 D2 [ 0.142411] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.144552] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.144651] pci 0000:00:1c.0: bridge window [mem 0xc4700000-0xc47fffff] [ 0.144727] pci 0000:02:00.0: [197b:2363] type 00 class 0x010601 [ 0.144856] pci 0000:02:00.0: reg 24: [mem 0xc4600000-0xc4601fff] [ 0.144875] pci 0000:02:00.0: reg 30: [mem 0xffff0000-0xffffffff pref] [ 0.144948] pci 0000:02:00.0: PME# supported from D3hot [ 0.144995] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185 [ 0.145028] pci 0000:02:00.1: reg 10: [io 0x2018-0x201f] [ 0.145046] pci 0000:02:00.1: reg 14: [io 0x2024-0x2027] [ 0.145065] pci 0000:02:00.1: reg 18: [io 0x2010-0x2017] [ 0.145083] pci 0000:02:00.1: reg 1c: [io 0x2020-0x2023] [ 0.145101] pci 0000:02:00.1: reg 20: [io 0x2000-0x200f] [ 0.145230] pci 0000:00:1c.1: PCI bridge to [bus 02-03] [ 0.145327] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.145332] pci 0000:00:1c.1: bridge window [mem 0xc2700000-0xc46fffff] [ 0.145338] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc23fffff 64bit pref] [ 0.145419] pci 0000:04:00.0: [8086:0087] type 00 class 0x028000 [ 0.145467] pci 0000:04:00.0: reg 10: [mem 0xc2600000-0xc2601fff 64bit] [ 0.145683] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.147501] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.147624] pci 0000:00:1c.2: bridge window [mem 0xc2600000-0xc26fffff] [ 0.147708] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.147745] pci 0000:05:00.0: reg 10: [mem 0xc2500000-0xc2501fff 64bit] [ 0.147941] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.149500] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.149624] pci 0000:00:1c.4: bridge window [mem 0xc2500000-0xc25fffff] [ 0.149699] pci 0000:06:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.149725] pci 0000:06:00.0: reg 10: [mem 0xc2400000-0xc2401fff 64bit] [ 0.149860] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.151501] pci 0000:00:1c.5: PCI bridge to [bus 06] [ 0.151627] pci 0000:00:1c.5: bridge window [mem 0xc2400000-0xc24fffff] [ 0.151676] pci 0000:00:1c.6: PCI bridge to [bus 07] (subtractive decode) [ 0.151783] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.151785] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.151786] pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.151788] pci 0000:00:1c.6: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.151790] pci 0000:00:1c.6: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.151792] pci 0000:00:1c.6: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.151793] pci 0000:00:1c.6: bridge window [mem 0xafa00000-0xfeafffff] (subtractive decode) [ 0.151839] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.151876] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.151909] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.151944] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.151980] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.152017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT] [ 0.152063] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.155670] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.156360] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 0.156965] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.157658] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 *3 4 5 6 7 11 12 14 15) [ 0.158260] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.158865] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.159598] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 *6 7 10 12 14 15) [ 0.160200] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.160920] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.161069] vgaarb: loaded [ 0.161160] vgaarb: bridge control possible 0000:00:02.0 [ 0.161345] SCSI subsystem initialized [ 0.161439] ACPI: bus type scsi registered [ 0.161601] libata version 3.00 loaded. [ 0.161755] PCI: Using ACPI for IRQ routing [ 0.163375] PCI: pci_cache_line_size set to 64 bytes [ 0.163897] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.163899] e820: reserve RAM buffer [mem 0xaa5d0000-0xabffffff] [ 0.163901] e820: reserve RAM buffer [mem 0x24e600000-0x24fffffff] [ 0.164061] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.164513] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.166617] Switching to clocksource hpet [ 0.168437] pnp: PnP ACPI init [ 0.168539] ACPI: bus type pnp registered [ 0.168806] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.168905] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.169002] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.169100] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.169198] system 00:00: [mem 0xafa00000-0xafa00fff] has been reserved [ 0.169296] system 00:00: [mem 0xfeb00000-0xfeb03fff] has been reserved [ 0.169393] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.169490] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.169589] system 00:00: [mem 0xff000000-0xffffffff] could not be reserved [ 0.169687] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.169798] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.169985] pnp 00:01: [dma 4] [ 0.170035] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.170116] pnp 00:02: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.170226] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.170325] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.170384] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.170446] system 00:05: [io 0x1000-0x100f] has been reserved [ 0.170544] system 00:05: [io 0xffff] has been reserved [ 0.170639] system 00:05: [io 0xffff] has been reserved [ 0.170747] system 00:05: [io 0x0400-0x047f] has been reserved [ 0.170844] system 00:05: [io 0x0500-0x053f] has been reserved [ 0.170942] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.171007] system 00:06: [io 0x0680-0x06ff] has been reserved [ 0.171104] system 00:06: [io 0x01e0-0x01e7] has been reserved [ 0.171201] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.171257] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.171312] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.171365] pnp 00:09: Plug and Play ACPI device, IDs TOS0220 PNP0f13 (active) [ 0.171447] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved [ 0.171546] system 00:0a: [mem 0x40000000-0x401fffff] has been reserved [ 0.171643] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.171737] pnp: PnP ACPI: found 11 devices [ 0.171831] ACPI: ACPI bus type pnp unregistered [ 0.180026] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 0.180214] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 0.180216] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 [ 0.180228] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.180230] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.180234] pci 0000:00:1c.5: BAR 15: assigned [mem 0xafb00000-0xafcfffff 64bit pref] [ 0.180382] pci 0000:00:1c.5: BAR 13: assigned [io 0x4000-0x4fff] [ 0.180480] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.180579] pci 0000:00:1c.0: bridge window [mem 0xc4700000-0xc47fffff] [ 0.180683] pci 0000:02:00.0: BAR 6: assigned [mem 0xc0400000-0xc040ffff pref] [ 0.180837] pci 0000:00:1c.1: PCI bridge to [bus 02-03] [ 0.180933] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.181033] pci 0000:00:1c.1: bridge window [mem 0xc2700000-0xc46fffff] [ 0.181133] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc23fffff 64bit pref] [ 0.181283] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.181380] pci 0000:00:1c.2: bridge window [mem 0xc2600000-0xc26fffff] [ 0.181484] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.181582] pci 0000:00:1c.4: bridge window [mem 0xc2500000-0xc25fffff] [ 0.181687] pci 0000:00:1c.5: PCI bridge to [bus 06] [ 0.181791] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff] [ 0.181890] pci 0000:00:1c.5: bridge window [mem 0xc2400000-0xc24fffff] [ 0.181990] pci 0000:00:1c.5: bridge window [mem 0xafb00000-0xafcfffff 64bit pref] [ 0.182141] pci 0000:00:1c.6: PCI bridge to [bus 07] [ 0.182279] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.182281] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.182283] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.182285] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.182286] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.182288] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff] [ 0.182289] pci_bus 0000:00: resource 10 [mem 0xafa00000-0xfeafffff] [ 0.182291] pci_bus 0000:01: resource 1 [mem 0xc4700000-0xc47fffff] [ 0.182293] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.182294] pci_bus 0000:02: resource 1 [mem 0xc2700000-0xc46fffff] [ 0.182296] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc23fffff 64bit pref] [ 0.182298] pci_bus 0000:04: resource 1 [mem 0xc2600000-0xc26fffff] [ 0.182299] pci_bus 0000:05: resource 1 [mem 0xc2500000-0xc25fffff] [ 0.182301] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] [ 0.182303] pci_bus 0000:06: resource 1 [mem 0xc2400000-0xc24fffff] [ 0.182304] pci_bus 0000:06: resource 2 [mem 0xafb00000-0xafcfffff 64bit pref] [ 0.182306] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7] [ 0.182308] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff] [ 0.182309] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff] [ 0.182311] pci_bus 0000:07: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.182312] pci_bus 0000:07: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.182314] pci_bus 0000:07: resource 9 [mem 0x000dc000-0x000dffff] [ 0.182316] pci_bus 0000:07: resource 10 [mem 0xafa00000-0xfeafffff] [ 0.182338] NET: Registered protocol family 2 [ 0.182584] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.182919] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.183123] TCP: Hash tables configured (established 65536 bind 65536) [ 0.183237] TCP: reno registered [ 0.183338] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.183461] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.183618] NET: Registered protocol family 1 [ 0.183786] RPC: Registered named UNIX socket transport module. [ 0.183882] RPC: Registered udp transport module. [ 0.183977] RPC: Registered tcp transport module. [ 0.184070] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.184172] pci 0000:00:02.0: Boot video device [ 0.184426] PCI: CLS 64 bytes, default 64 [ 0.184442] dmar: Host address width 36 [ 0.184535] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.184642] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.184800] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.184898] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.185045] dmar: RMRR base: 0x000000000e0000 end: 0x000000000e7fff [ 0.185142] dmar: RMRR base: 0x000000aae44000 end: 0x000000aae63fff [ 0.185238] dmar: RMRR base: 0x000000ab800000 end: 0x000000af9fffff [ 0.185338] DMAR: No ATSR found [ 0.185454] IOMMU 0 0xfed90000: using Queued invalidation [ 0.185550] IOMMU 1 0xfed91000: using Queued invalidation [ 0.185647] IOMMU: Setting RMRR: [ 0.185757] IOMMU: Setting identity map for device 0000:00:02.0 [0xab800000 - 0xaf9fffff] [ 0.186295] IOMMU: Setting identity map for device 0000:00:1d.0 [0xaae44000 - 0xaae63fff] [ 0.186460] IOMMU: Setting identity map for device 0000:00:1a.0 [0xaae44000 - 0xaae63fff] [ 0.186615] IOMMU: Setting identity map for device 0000:00:1d.0 [0xe0000 - 0xe7fff] [ 0.186780] IOMMU: Setting identity map for device 0000:00:1a.0 [0xe0000 - 0xe7fff] [ 0.186934] IOMMU: Prepare 0-16MiB unity mapping for LPC [ 0.187035] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] [ 0.187436] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O [ 0.187785] ------------[ cut here ]------------ [ 0.187883] WARNING: at drivers/pci/search.c:46 pci_find_upstream_pcie_bridge+0x56/0x70() [ 0.188030] Hardware name: dynabook R731/W2UB [ 0.188123] Modules linked in: [ 0.188256] Pid: 1, comm: swapper/0 Not tainted 3.8.0-r1 #1 [ 0.188351] Call Trace: [ 0.188446] [] warn_slowpath_common+0x7e/0x96 [ 0.188543] [] warn_slowpath_null+0x15/0x17 [ 0.188640] [] pci_find_upstream_pcie_bridge+0x56/0x70 [ 0.188752] [] intel_iommu_add_device+0x4b/0x169 [ 0.188850] [] add_iommu_group+0x3a/0x41 [ 0.188946] [] ? iommu_domain_alloc+0x68/0x68 [ 0.189045] [] bus_for_each_dev+0x54/0x80 [ 0.189142] [] bus_set_iommu+0x3d/0x44 [ 0.189240] [] intel_iommu_init+0xac3/0xb3c [ 0.189338] [] ? sys_mkdirat+0x9b/0xc6 [ 0.189436] [] ? rd_load_disk+0xad/0xad [ 0.189533] [] ? memblock_find_dma_reserve+0x13f/0x13f [ 0.189631] [] pci_iommu_init+0x13/0x3e [ 0.189738] [] do_one_initcall+0x7a/0x134 [ 0.189836] [] kernel_init_freeable+0x133/0x1bd [ 0.189933] [] ? do_early_param+0x86/0x86 [ 0.190031] [] ? rest_init+0x6f/0x6f [ 0.190127] [] kernel_init+0x9/0xd6 [ 0.190225] [] ret_from_fork+0x7c/0xb0 [ 0.190321] [] ? rest_init+0x6f/0x6f [ 0.190420] ---[ end trace 935c32344ecc0b0a ]--- [ 0.192409] Simple Boot Flag at 0x7c set to 0x1 [ 0.193961] audit: initializing netlink socket (disabled) [ 0.195391] type=2000 audit(1365640233.172:1): initialized [ 0.195996] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.198567] VFS: Disk quotas dquot_6.5.2 [ 0.198739] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.199540] fuse init (API version 7.20) [ 0.199767] msgmni has been set to 15858 [ 0.200271] NET: Registered protocol family 38 [ 0.200438] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.200603] io scheduler noop registered [ 0.200709] io scheduler deadline registered [ 0.200805] io scheduler cfq registered (default) [ 0.201242] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.201421] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.201681] intel_idle: MWAIT substates: 0x21120 [ 0.201682] intel_idle: v0.4 model 0x2A [ 0.201683] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.201786] ACPI: AC Adapter [ADP1] (on-line) [ 0.202015] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.202164] ACPI: Power Button [PWRB] [ 0.202313] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.202471] ACPI: Lid Switch [LID] [ 0.202618] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.202779] ACPI: Power Button [PWRF] [ 0.203081] ACPI: Requesting acpi_cpufreq [ 0.206145] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.206243] ACPI: Thermal Zone [TZ01] (16 C) [ 0.206538] GHES: HEST is not enabled! [ 0.206764] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.206814] ACPI: Battery Slot [BAT1] (battery present) [ 0.229166] 0000:00:16.3: ttyS4 at I/O 0x3090 (irq = 19) is a 16550A [ 0.229622] Non-volatile memory driver v1.3 [ 0.231452] brd: module loaded [ 0.232481] loop: module loaded [ 0.232598] Loading iSCSI transport class v2.0-870. [ 0.232932] ahci 0000:00:1f.2: version 3.0 [ 0.232978] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 0.233004] ahci: SSS flag set, parallel bus scan disabled [ 0.243673] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0xd impl SATA mode [ 0.243840] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 0.243990] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.248470] scsi0 : ahci [ 0.248675] scsi1 : ahci [ 0.248864] scsi2 : ahci [ 0.249053] scsi3 : ahci [ 0.249239] scsi4 : ahci [ 0.249425] scsi5 : ahci [ 0.249593] ata1: SATA max UDMA/133 abar m2048@0xc4827000 port 0xc4827100 irq 42 [ 0.249749] ata2: DUMMY [ 0.249839] ata3: SATA max UDMA/133 abar m2048@0xc4827000 port 0xc4827200 irq 42 [ 0.249984] ata4: SATA max UDMA/133 abar m2048@0xc4827000 port 0xc4827280 irq 42 [ 0.250129] ata5: DUMMY [ 0.250220] ata6: DUMMY [ 0.250439] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 0.250589] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 0.251093] scsi6 : ahci [ 0.251287] scsi7 : ahci [ 0.251458] ata7: SATA max UDMA/133 abar m8192@0xc4600000 port 0xc4600100 irq 17 [ 0.251615] ata8: SATA max UDMA/133 abar m8192@0xc4600000 port 0xc4600180 irq 17 [ 0.251981] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.254348] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.254446] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.254648] mousedev: PS/2 mouse device common for all mice [ 0.254973] rtc_cmos 00:07: RTC can wake from S4 [ 0.255212] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.255335] rtc0: alarms up to one year, 242 bytes nvram, hpet irqs [ 0.255691] cpuidle: using governor ladder [ 0.255876] cpuidle: using governor menu [ 0.255968] EFI Variables Facility v0.08 2004-May-17 [ 0.256131] zram: num_devices not specified. Using default: 1 [ 0.256226] zram: Creating 1 devices ... [ 0.256512] Netfilter messages via NETLINK v0.30. [ 0.256630] nfnl_acct: registering with nfnetlink. [ 0.256734] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 0.256967] ctnetlink v0.93: registering with nfnetlink. [ 0.257164] xt_time: kernel timezone is -0000 [ 0.257309] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.257436] arp_tables: (C) 2002 David S. Miller [ 0.257549] TCP: cubic registered [ 0.257665] Initializing XFRM netlink socket [ 0.257761] NET: Registered protocol family 17 [ 0.257863] Key type dns_resolver registered [ 0.258410] registered taskstats version 1 [ 0.259075] Magic number: 9:287:506 [ 0.259245] rtc_cmos 00:07: setting system clock to 2013-04-11 00:30:33 UTC (1365640233) [ 0.264775] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.555367] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.556337] ata8: SATA link down (SStatus 0 SControl 300) [ 0.556418] ata7: SATA link down (SStatus 0 SControl 300) [ 0.556146] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20121018/psargs-359) [ 0.556905] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff88024486ccd0), AE_NOT_FOUND (20121018/psparse-537) [ 0.557515] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20121018/psargs-359) [ 0.557881] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff88024486ccf8), AE_NOT_FOUND (20121018/psparse-537) [ 0.558385] ata1.00: ATA-8: TOSHIBA THNSNC128GMLJ, CJTA0202, max UDMA/100 [ 0.558532] ata1.00: 250069680 sectors, multi 16: LBA48 [ 0.559306] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20121018/psargs-359) [ 0.559679] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff88024486ccd0), AE_NOT_FOUND (20121018/psparse-537) [ 0.560265] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20121018/psargs-359) [ 0.560631] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff88024486ccf8), AE_NOT_FOUND (20121018/psparse-537) [ 0.561115] ata1.00: configured for UDMA/100 [ 0.561627] scsi 0:0:0:0: Direct-Access ATA TOSHIBA THNSNC12 CJTA PQ: 0 ANSI: 5 [ 0.563151] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 0.563717] sd 0:0:0:0: [sda] Write Protect is off [ 0.563885] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.563966] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.565301] sda: sda1 sda2 sda3 sda4 [ 0.566665] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.867950] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.870933] ata3.00: ATAPI: MATSHITADVD-RAM UJ8A2ES, 1.20, max UDMA/100 [ 0.873980] ata3.00: configured for UDMA/100 [ 0.879658] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8A2ES 1.20 PQ: 0 ANSI: 5 [ 0.990318] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400, board id: 3655, fw id: 664027 [ 0.990562] psmouse serio1: synaptics: Toshiba dynabook R731/W2UB detected, limiting rate to 40pps. [ 1.023683] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4 [ 1.185527] ata4: SATA link down (SStatus 0 SControl 300) [ 1.190776] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 1.191012] VFS: Mounted root (ext4 filesystem) readonly on device 8:4. [ 1.192131] devtmpfs: mounted [ 1.195180] Freeing unused kernel memory: 648k freed [ 1.195545] Write protecting the kernel read-only data: 10240k [ 1.196047] tsc: Refined TSC clocksource calibration: 2691.257 MHz [ 1.196189] Switching to clocksource tsc [ 1.210164] Freeing unused kernel memory: 1712k freed [ 1.225305] Freeing unused kernel memory: 1824k freed [ 1.781985] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400, board id: 3655, fw id: 664027 [ 1.782000] psmouse serio1: synaptics: Toshiba dynabook R731/W2UB detected, limiting rate to 40pps. [ 1.813728] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 1.914713] systemd-udevd[1070]: starting version 197 [ 1.989664] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler [ 1.990306] wmi: Mapper loaded [ 1.993947] toshiba_bluetooth: Re-enabling Toshiba Bluetooth [ 1.999159] ACPI: bus type usb registered [ 1.999206] usbcore: registered new interface driver usbfs [ 1.999218] usbcore: registered new interface driver hub [ 2.002668] usbcore: registered new device driver usb [ 2.005383] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.006980] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 2.006989] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 1 [ 2.007239] xhci_hcd 0000:05:00.0: irq 16, io mem 0xc2500000 [ 2.007319] xhci_hcd 0000:05:00.0: irq 43 for MSI/MSI-X [ 2.007325] xhci_hcd 0000:05:00.0: irq 44 for MSI/MSI-X [ 2.007331] xhci_hcd 0000:05:00.0: irq 45 for MSI/MSI-X [ 2.007337] xhci_hcd 0000:05:00.0: irq 46 for MSI/MSI-X [ 2.007351] xhci_hcd 0000:05:00.0: irq 47 for MSI/MSI-X [ 2.007484] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.007487] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.007489] usb usb1: Product: xHCI Host Controller [ 2.007491] usb usb1: Manufacturer: Linux 3.8.0-r1 xhci_hcd [ 2.007493] usb usb1: SerialNumber: 0000:05:00.0 [ 2.007501] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19 [ 2.007583] input: Toshiba input device as /devices/virtual/input/input6 [ 2.007892] sdhci: Secure Digital Host Controller Interface driver [ 2.007894] sdhci: Copyright(c) Pierre Ossman [ 2.008200] Linux agpgart interface v0.103 [ 2.008273] xHCI xhci_add_endpoint called for root hub [ 2.008275] xHCI xhci_check_bandwidth called for root hub [ 2.008306] hub 1-0:1.0: USB hub found [ 2.008315] hub 1-0:1.0: 2 ports detected [ 2.008456] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 2.008461] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2 [ 2.009894] ehci-pci: EHCI PCI platform driver [ 2.009946] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 2.009952] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.009959] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.009985] ehci-pci 0000:00:1a.0: debug port 2 [ 2.010609] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.010612] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.010614] usb usb2: Product: xHCI Host Controller [ 2.010616] usb usb2: Manufacturer: Linux 3.8.0-r1 xhci_hcd [ 2.010618] usb usb2: SerialNumber: 0000:05:00.0 [ 2.010912] xHCI xhci_add_endpoint called for root hub [ 2.010914] xHCI xhci_check_bandwidth called for root hub [ 2.010943] hub 2-0:1.0: USB hub found [ 2.010954] hub 2-0:1.0: 2 ports detected [ 2.012878] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001) [ 2.012910] pata_jmicron 0000:02:00.1: setting latency timer to 64 [ 2.013151] scsi8 : pata_jmicron [ 2.013199] scsi9 : pata_jmicron [ 2.013228] ata9: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq 18 [ 2.013230] ata10: PATA max UDMA/100 cmd 0x2010 ctl 0x2020 bmdma 0x2008 irq 18 [ 2.013903] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 2.013916] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc4829000 [ 2.016222] cfg80211: Calling CRDA to update world regulatory domain [ 2.016435] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 2.016443] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4 [ 2.016610] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k [ 2.016611] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 2.016646] xhci_hcd 0000:06:00.0: irq 17, io mem 0xc2400000 [ 2.016717] xhci_hcd 0000:06:00.0: irq 48 for MSI/MSI-X [ 2.016724] xhci_hcd 0000:06:00.0: irq 49 for MSI/MSI-X [ 2.016730] xhci_hcd 0000:06:00.0: irq 50 for MSI/MSI-X [ 2.016737] xhci_hcd 0000:06:00.0: irq 51 for MSI/MSI-X [ 2.016743] xhci_hcd 0000:06:00.0: irq 52 for MSI/MSI-X [ 2.017034] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.017037] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.017039] usb usb4: Product: xHCI Host Controller [ 2.017041] usb usb4: Manufacturer: Linux 3.8.0-r1 xhci_hcd [ 2.017043] usb usb4: SerialNumber: 0000:06:00.0 [ 2.017174] xHCI xhci_add_endpoint called for root hub [ 2.017176] xHCI xhci_check_bandwidth called for root hub [ 2.017205] hub 4-0:1.0: USB hub found [ 2.017214] hub 4-0:1.0: 2 ports detected [ 2.017346] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 2.017351] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5 [ 2.020481] [drm] Initialized drm 1.1.0 20060810 [ 2.020491] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4) [ 2.021138] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.021142] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.021144] usb usb5: Product: xHCI Host Controller [ 2.021146] usb usb5: Manufacturer: Linux 3.8.0-r1 xhci_hcd [ 2.021149] usb usb5: SerialNumber: 0000:06:00.0 [ 2.021261] xHCI xhci_add_endpoint called for root hub [ 2.021263] xHCI xhci_check_bandwidth called for root hub [ 2.021295] hub 5-0:1.0: USB hub found [ 2.021310] hub 5-0:1.0: 2 ports detected [ 2.023060] Intel(R) Wireless WiFi driver for Linux, in-tree:d [ 2.023063] Copyright(c) 2003-2012 Intel Corporation [ 2.023216] iwlwifi 0000:04:00.0: irq 53 for MSI/MSI-X [ 2.023350] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.023454] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.023457] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.023460] usb usb3: Product: EHCI Host Controller [ 2.023462] usb usb3: Manufacturer: Linux 3.8.0-r1 ehci_hcd [ 2.023464] usb usb3: SerialNumber: 0000:00:1a.0 [ 2.023625] hub 3-0:1.0: USB hub found [ 2.023629] hub 3-0:1.0: 3 ports detected [ 2.023905] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 2.023908] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.023912] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 2.023923] ehci-pci 0000:00:1d.0: debug port 2 [ 2.027834] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.027856] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc4828000 [ 2.033376] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.033407] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.033409] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.033411] usb usb6: Product: EHCI Host Controller [ 2.033413] usb usb6: Manufacturer: Linux 3.8.0-r1 ehci_hcd [ 2.033415] usb usb6: SerialNumber: 0000:00:1d.0 [ 2.033556] hub 6-0:1.0: USB hub found [ 2.033561] hub 6-0:1.0: 3 ports detected [ 2.033980] e1000e 0000:00:19.0: setting latency timer to 64 [ 2.034048] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.034083] e1000e 0000:00:19.0: irq 54 for MSI/MSI-X [ 2.034350] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.034353] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.034483] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.049382] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA [ 2.054189] iwlwifi 0000:04:00.0: loaded firmware version 41.28.5.1 build 33926 [ 2.106659] cfg80211: World regulatory domain updated: [ 2.106663] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2.106667] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2.106670] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2.106672] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2.106675] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2.106677] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2.133407] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 2.133411] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 2.133413] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 2.133415] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled [ 2.133416] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_P2P disabled [ 2.133418] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN, REV=0x84 [ 2.133502] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 2.134315] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio. [ 2.235829] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) e8:9d:87:11:dd:1f [ 2.235833] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.235884] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 2.236074] snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X [ 2.237533] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 2.269159] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 2.269219] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 2.269270] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 2.269318] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 2.269367] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 2.274826] [drm:i915_dump_device_info], i915 device info: gen=6, pciid=0x0126 flags=is_mobile,need_gfx_hws,has_force_wake,has_fbc,has_hotplug,has_bsd_ring,has_blt_ring,has_llc, [ 2.275545] [drm] Memory usable by graphics device = 2048M [ 2.275548] [drm:i915_gem_gtt_init], GMADR size = 256M [ 2.275550] [drm:i915_gem_gtt_init], GTT stolen size = 64M [ 2.275556] i915 0000:00:02.0: setting latency timer to 64 [ 2.297368] [drm:intel_detect_pch], Found CougarPoint PCH [ 2.297455] [drm:intel_opregion_setup], graphic opregion physical addr: 0xaa6aa018 [ 2.297468] [drm:intel_opregion_setup], Public ACPI methods supported [ 2.297470] [drm:intel_opregion_setup], SWSCI supported [ 2.297471] [drm:intel_opregion_setup], ASLE supported [ 2.297492] i915 0000:00:02.0: irq 56 for MSI/MSI-X [ 2.297498] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.297499] [drm] Driver supports precise vblank timestamp query. [ 2.297501] [drm:init_vbt_defaults], Set default to SSC at 100MHz [ 2.297503] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-M d [ 2.297505] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120 display_clock_mode 0 [ 2.297507] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 2.297510] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 2.297511] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 0 77000 1366 1401 1513 1641 768 769 771 780 0x8 0xa [ 2.297514] [drm:parse_lfp_panel_data], VBT initial LVDS value 300300 [ 2.297516] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 2.297517] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 2.297520] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 2.297527] [drm:intel_dsm_pci_probe], no _DSM method for intel device [ 2.297531] [drm:i915_setup_compression], FBC base 0xfc000000, ll base 0x00000000, size 32M [ 2.297538] [drm:intel_modeset_init], 2 display pipes available. [ 2.297548] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.313043] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.327639] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 2.327649] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.327655] usb 1-1: Product: USB2.0 Hub [ 2.328814] hub 1-1:1.0: USB hub found [ 2.329491] hub 1-1:1.0: 4 ports detected [ 2.347949] [drm] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3 [ 2.355930] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus panel [ 2.355940] [drm:intel_lvds_init], using mode from VBT: [ 2.355945] [drm:drm_mode_debug_printmodeline], [ 2.355954] Modeline 0:"1366x768" 0 77000 1366 1401 1513 1641 768 769 771 780 0x8 0xa [ 2.356067] [drm:intel_panel_get_backlight], get backlight PWM = 4539 [ 2.356125] [drm:intel_panel_get_backlight], get backlight PWM = 4539 [ 2.356190] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 2.356622] [drm:intel_sdvo_read_byte], i2c transfer returned -6 [ 2.356627] [drm:intel_sdvo_init], No SDVO device found on SDVOB [ 2.356680] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 2.356800] [drm:intel_dp_i2c_init], i2c_init DPDDC-B [ 2.359367] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f [ 2.359373] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.361935] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f [ 2.361939] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.362157] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 2.364728] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f [ 2.364733] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.367294] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f [ 2.367298] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.367425] [drm:intel_dp_i2c_init], i2c_init DPDDC-D [ 2.369982] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f [ 2.369983] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.372533] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f [ 2.372534] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.372546] [drm:ironlake_init_pch_refclk], has_panel 1 has_lvds 1 has_pch_edp 0 has_cpu_edp 0 has_ck505 0 [ 2.372549] [drm:ironlake_init_pch_refclk], Using SSC on panel [ 2.374381] [drm:init_status_page], render ring hws offset: 0x00000000 [ 2.374522] [drm:init_status_page], bsd ring hws offset: 0x00022000 [ 2.374616] [drm:init_status_page], blitter ring hws offset: 0x00043000 [ 2.374665] [drm:create_default_context], Default HW context loaded [ 2.374666] [drm:i915_gem_context_init], HW context support initialized [ 2.374682] [drm:intel_modeset_setup_hw_state], [CRTC:3] hw state readout: enabled [ 2.374684] [drm:intel_modeset_setup_hw_state], [CRTC:5] hw state readout: disabled [ 2.374686] [drm:intel_modeset_setup_hw_state], [ENCODER:8:LVDS-8] hw state readout: disabled, pipe=0 [ 2.374690] [drm:intel_modeset_setup_hw_state], [ENCODER:12:DAC-12] hw state readout: disabled, pipe=0 [ 2.374692] [drm:intel_modeset_setup_hw_state], [ENCODER:13:TMDS-13] hw state readout: disabled, pipe=0 [ 2.374695] [drm:intel_modeset_setup_hw_state], [ENCODER:17:TMDS-17] hw state readout: disabled, pipe=0 [ 2.374698] [drm:intel_modeset_setup_hw_state], [ENCODER:19:TMDS-19] hw state readout: disabled, pipe=0 [ 2.374701] [drm:intel_modeset_setup_hw_state], [ENCODER:21:TMDS-21] hw state readout: enabled, pipe=0 [ 2.374703] [drm:intel_modeset_setup_hw_state], [ENCODER:23:TMDS-23] hw state readout: disabled, pipe=0 [ 2.374706] [drm:intel_modeset_setup_hw_state], [ENCODER:25:TMDS-25] hw state readout: disabled, pipe=0 [ 2.374709] [drm:intel_modeset_setup_hw_state], [CONNECTOR:7:LVDS-1] hw state readout: disabled [ 2.374711] [drm:intel_modeset_setup_hw_state], [CONNECTOR:11:VGA-1] hw state readout: disabled [ 2.374714] [drm:intel_modeset_setup_hw_state], [CONNECTOR:14:HDMI-A-1] hw state readout: disabled [ 2.374716] [drm:intel_modeset_setup_hw_state], [CONNECTOR:18:DP-1] hw state readout: disabled [ 2.374719] [drm:intel_modeset_setup_hw_state], [CONNECTOR:20:HDMI-A-2] hw state readout: disabled [ 2.374721] [drm:intel_modeset_setup_hw_state], [CONNECTOR:22:HDMI-A-3] hw state readout: enabled [ 2.374724] [drm:intel_modeset_setup_hw_state], [CONNECTOR:24:DP-2] hw state readout: disabled [ 2.374726] [drm:intel_modeset_setup_hw_state], [CONNECTOR:26:DP-3] hw state readout: disabled [ 2.374734] [drm:intel_connector_check_state], [CONNECTOR:22:HDMI-A-3] [ 2.374738] [drm:intel_modeset_check_state], [ENCODER:8:LVDS-8] [ 2.374741] [drm:intel_modeset_check_state], [ENCODER:12:DAC-12] [ 2.374743] [drm:intel_modeset_check_state], [ENCODER:13:TMDS-13] [ 2.374746] [drm:intel_modeset_check_state], [ENCODER:17:TMDS-17] [ 2.374748] [drm:intel_modeset_check_state], [ENCODER:19:TMDS-19] [ 2.374751] [drm:intel_modeset_check_state], [ENCODER:21:TMDS-21] [ 2.374753] [drm:intel_modeset_check_state], [ENCODER:23:TMDS-23] [ 2.374756] [drm:intel_modeset_check_state], [ENCODER:25:TMDS-25] [ 2.374758] [drm:intel_modeset_check_state], [CRTC:3] [ 2.374759] [drm:intel_modeset_check_state], [CRTC:5] [ 2.374764] [drm:intel_crt_reset], pch crt adpa set to 0xf40000 [ 2.374791] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 2.374794] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 2.374795] [drm:drm_mode_debug_printmodeline], Modeline 27:"1366x768" 60 77000 1366 1401 1513 1641 768 769 771 780 0x8 0xa [ 2.374798] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 2.374800] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 2.383990] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 2.383996] [drm:intel_crt_detect], CRT not detected via hotplug [ 2.385942] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 2.385957] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 2.385964] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 2.385968] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 2.386353] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 2.386357] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 2.386362] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 2.386369] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 2.386378] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] [ 2.387939] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 2.387955] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 2.387963] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected [ 2.387972] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 2.390538] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f [ 2.394413] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f [ 2.398406] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f [ 2.399854] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2.399860] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 2.399866] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-2] [ 2.401917] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 2.401933] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 2.401941] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-2] disconnected [ 2.401950] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-3] [ 2.434913] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 2.545871] [drm:drm_edid_to_eld], ELD monitor SMS27A850 [ 2.545881] [drm:drm_edid_to_eld], ELD size 8, SAD count 0 [ 2.545979] [drm:drm_mode_debug_printmodeline], Modeline 77:"2048x1152" 0 198022 2048 2184 2408 2768 1152 1153 1156 1192 0x0 0x6 [ 2.545987] [drm:drm_mode_prune_invalid], Not using 2048x1152 mode 15 [ 2.545993] [drm:drm_mode_debug_printmodeline], Modeline 72:"1920x1440" 0 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6 [ 2.546000] [drm:drm_mode_prune_invalid], Not using 1920x1440 mode 15 [ 2.546005] [drm:drm_mode_debug_printmodeline], Modeline 71:"1856x1392" 0 218250 1856 1952 2176 2528 1392 1393 1396 1439 0x40 0x6 [ 2.546012] [drm:drm_mode_prune_invalid], Not using 1856x1392 mode 15 [ 2.546016] [drm:drm_mode_debug_printmodeline], Modeline 70:"1792x1344" 0 204750 1792 1920 2120 2448 1344 1345 1348 1394 0x40 0x6 [ 2.546023] [drm:drm_mode_prune_invalid], Not using 1792x1344 mode 15 [ 2.546027] [drm:drm_mode_debug_printmodeline], Modeline 69:"1680x1050" 0 187000 1680 1800 1976 2272 1050 1053 1059 1099 0x40 0x6 [ 2.546034] [drm:drm_mode_prune_invalid], Not using 1680x1050 mode 15 [ 2.546039] [drm:drm_mode_debug_printmodeline], Modeline 68:"1600x1200" 0 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 2.546046] [drm:drm_mode_prune_invalid], Not using 1600x1200 mode 15 [ 2.546050] [drm:drm_mode_debug_printmodeline], Modeline 67:"1600x1200" 0 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 2.546057] [drm:drm_mode_prune_invalid], Not using 1600x1200 mode 15 [ 2.546061] [drm:drm_mode_debug_printmodeline], Modeline 43:"1920x1200" 0 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6 [ 2.546068] [drm:drm_mode_prune_invalid], Not using 1920x1200 mode 15 [ 2.546073] [drm:drm_mode_debug_printmodeline], Modeline 29:"2560x1440" 0 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0x9 [ 2.546080] [drm:drm_mode_prune_invalid], Not using 2560x1440 mode 15 [ 2.546096] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:HDMI-A-3] probed modes : [ 2.546101] [drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 2.546109] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 2.546116] [drm:drm_mode_debug_printmodeline], Modeline 41:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 2.546123] [drm:drm_mode_debug_printmodeline], Modeline 42:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 2.546130] [drm:drm_mode_debug_printmodeline], Modeline 76:"1680x945" 60 131481 1680 1784 1960 2240 945 946 949 978 0x0 0x6 [ 2.546137] [drm:drm_mode_debug_printmodeline], Modeline 65:"1400x1050" 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6 [ 2.546144] [drm:drm_mode_debug_printmodeline], Modeline 64:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6 [ 2.546151] [drm:drm_mode_debug_printmodeline], Modeline 75:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6 [ 2.546158] [drm:drm_mode_debug_printmodeline], Modeline 51:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 2.546165] [drm:drm_mode_debug_printmodeline], Modeline 39:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 2.546172] [drm:drm_mode_debug_printmodeline], Modeline 66:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6 [ 2.546179] [drm:drm_mode_debug_printmodeline], Modeline 40:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 2.546186] [drm:drm_mode_debug_printmodeline], Modeline 38:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 2.546193] [drm:drm_mode_debug_printmodeline], Modeline 74:"1366x768" 60 85885 1366 1439 1583 1800 768 769 772 795 0x0 0x6 [ 2.546200] [drm:drm_mode_debug_printmodeline], Modeline 63:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5 [ 2.546207] [drm:drm_mode_debug_printmodeline], Modeline 62:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6 [ 2.546214] [drm:drm_mode_debug_printmodeline], Modeline 37:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9 [ 2.546221] [drm:drm_mode_debug_printmodeline], Modeline 58:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 2.546228] [drm:drm_mode_debug_printmodeline], Modeline 61:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9 [ 2.546235] [drm:drm_mode_debug_printmodeline], Modeline 60:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6 [ 2.546242] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 2.546249] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 2.546256] [drm:drm_mode_debug_printmodeline], Modeline 52:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 2.546263] [drm:drm_mode_debug_printmodeline], Modeline 53:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 2.546270] [drm:drm_mode_debug_printmodeline], Modeline 54:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 2.546277] [drm:drm_mode_debug_printmodeline], Modeline 73:"1024x576" 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6 [ 2.546284] [drm:drm_mode_debug_printmodeline], Modeline 55:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 2.546292] [drm:drm_mode_debug_printmodeline], Modeline 57:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 2.546299] [drm:drm_mode_debug_printmodeline], Modeline 56:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 2.546305] [drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 2.546312] [drm:drm_mode_debug_printmodeline], Modeline 45:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 2.546319] [drm:drm_mode_debug_printmodeline], Modeline 34:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 2.546326] [drm:drm_mode_debug_printmodeline], Modeline 59:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 2.546333] [drm:drm_mode_debug_printmodeline], Modeline 35:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 2.546340] [drm:drm_mode_debug_printmodeline], Modeline 47:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa [ 2.546347] [drm:drm_mode_debug_printmodeline], Modeline 46:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 2.546354] [drm:drm_mode_debug_printmodeline], Modeline 48:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 2.546361] [drm:drm_mode_debug_printmodeline], Modeline 49:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 2.546368] [drm:drm_mode_debug_printmodeline], Modeline 50:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 2.546377] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] [ 2.548990] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f [ 2.549449] usb 3-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.549460] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.550033] hub 3-1:1.0: USB hub found [ 2.550363] hub 3-1:1.0: 6 ports detected [ 2.553257] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f [ 2.557204] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f [ 2.558686] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2.558698] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] disconnected [ 2.558706] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] [ 2.561279] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f [ 2.565290] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f [ 2.569226] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f [ 2.570688] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2.570702] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] disconnected [ 2.570711] [drm:drm_setup_crtcs], [ 2.570717] [drm:drm_enable_connectors], connector 7 enabled? yes [ 2.570722] [drm:drm_enable_connectors], connector 11 enabled? no [ 2.570726] [drm:drm_enable_connectors], connector 14 enabled? no [ 2.570731] [drm:drm_enable_connectors], connector 18 enabled? no [ 2.570735] [drm:drm_enable_connectors], connector 20 enabled? no [ 2.570739] [drm:drm_enable_connectors], connector 22 enabled? yes [ 2.570743] [drm:drm_enable_connectors], connector 24 enabled? no [ 2.570747] [drm:drm_enable_connectors], connector 26 enabled? no [ 2.570752] [drm:drm_target_preferred], looking for cmdline mode on connector 7 [ 2.570756] [drm:drm_target_preferred], looking for preferred mode on connector 7 [ 2.570761] [drm:drm_target_preferred], found mode 1366x768 [ 2.570765] [drm:drm_target_preferred], looking for cmdline mode on connector 22 [ 2.570769] [drm:drm_target_preferred], looking for preferred mode on connector 22 [ 2.570778] [drm:drm_target_preferred], found mode 1920x1080 [ 2.570782] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 2.570796] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 3 [ 2.570805] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 5 [ 2.588140] [drm:intelfb_create], allocated 1920x1080 fb: 0x00072000, bo ffff88024395f400 [ 2.588416] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.588426] i915 0000:00:02.0: registered panic notifier [ 2.593281] acpi device:04: registered as cooling_device4 [ 2.593640] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no) [ 2.593764] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12 [ 2.593968] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.654558] usb 6-1: new high-speed USB device number 2 using ehci-pci [ 2.769195] usb 6-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.769208] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.769731] hub 6-1:1.0: USB hub found [ 2.769921] hub 6-1:1.0: 8 ports detected [ 2.837183] usb 1-1.2: new low-speed USB device number 3 using xhci_hcd [ 2.860085] usb 1-1.2: New USB device found, idVendor=045e, idProduct=0040 [ 2.860097] usb 1-1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 2.860103] usb 1-1.2: Product: Microsoft 3-Button Mouse with IntelliEye(TM) [ 2.860108] usb 1-1.2: Manufacturer: Microsoft [ 2.860472] usb 1-1.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.925931] usb 1-1.3: new low-speed USB device number 4 using xhci_hcd [ 2.947220] usb 1-1.3: New USB device found, idVendor=060b, idProduct=6220 [ 2.947233] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.947239] usb 1-1.3: Product: USB KEYBOARD [ 2.947244] usb 1-1.3: Manufacturer: NOVATEK [ 2.947602] usb 1-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.947619] usb 1-1.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3.012419] usb 3-1.1: new full-speed USB device number 3 using ehci-pci [ 3.022279] usbcore: registered new interface driver usbhid [ 3.022286] usbhid: USB HID core driver [ 3.024682] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1c.4/0000:05:00.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input13 [ 3.025096] hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:05:00.0-1.2/input0 [ 3.025514] input: NOVATEK USB KEYBOARD as /devices/pci0000:00/0000:00:1c.4/0000:05:00.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input14 [ 3.025789] hid-generic 0003:060B:6220.0002: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB KEYBOARD] on usb-0000:05:00.0-1.3/input0 [ 3.028051] input: NOVATEK USB KEYBOARD as /devices/pci0000:00/0000:00:1c.4/0000:05:00.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input15 [ 3.028365] hid-generic 0003:060B:6220.0003: input,hidraw2: USB HID v1.10 Device [NOVATEK USB KEYBOARD] on usb-0000:05:00.0-1.3/input1 [ 3.101450] usb 3-1.1: New USB device found, idVendor=08ff, idProduct=168b [ 3.101462] usb 3-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.101468] usb 3-1.1: Product: Fingerprint Sensor [ 3.165227] usb 6-1.1: new full-speed USB device number 3 using ehci-pci [ 3.245006] usb 6-1.1: New USB device found, idVendor=0930, idProduct=0213 [ 3.245018] usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.245025] usb 6-1.1: Product: BRCM Bluetooth Controller BCM2070 [ 3.245030] usb 6-1.1: Manufacturer: Broadcom Corp [ 3.245035] usb 6-1.1: SerialNumber: 4CEDDEAE5E37 [ 3.282197] Bluetooth: Core ver 2.16 [ 3.282243] NET: Registered protocol family 31 [ 3.282249] Bluetooth: HCI device and connection manager initialized [ 3.282265] Bluetooth: HCI socket layer initialized [ 3.282275] Bluetooth: L2CAP socket layer initialized [ 3.282292] Bluetooth: SCO socket layer initialized [ 3.284611] usbcore: registered new interface driver btusb [ 3.318856] usb 6-1.3: new high-speed USB device number 4 using ehci-pci [ 3.404370] usb 6-1.3: New USB device found, idVendor=0424, idProduct=2517 [ 3.404383] usb 6-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.404964] hub 6-1.3:1.0: USB hub found [ 3.405055] hub 6-1.3:1.0: 6 ports detected [ 3.479776] usb 6-1.6: new high-speed USB device number 5 using ehci-pci [ 3.565845] usb 6-1.6: New USB device found, idVendor=8086, idProduct=0186 [ 3.565858] usb 6-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.565864] usb 6-1.6: Product: Intel(R) Centrino(R) Advanced-N + WiMAX 6250 [ 3.565869] usb 6-1.6: Manufacturer: Intel(R) Corporation [ 3.647459] i2400m_usb 6-1.6:1.0: WiMAX interface wmx0 (00:1d:e1:42:4b:22) ready [ 3.679335] usb 6-1.3.1: new full-speed USB device number 6 using ehci-pci [ 3.687072] [drm:intel_crtc_set_config], [CRTC:3] [FB:43] #connectors=1 (x y) (0 0) [ 3.687079] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set [ 3.687082] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 3.687089] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.687096] [drm:drm_mode_debug_printmodeline], Modeline 29:"1366x768" 60 77000 1366 1401 1513 1641 768 769 771 780 0x8 0xa [ 3.687100] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch [ 3.687105] [drm:intel_modeset_stage_output_state], [CONNECTOR:22:HDMI-A-3] to [NOCRTC] [ 3.687107] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch [ 3.687112] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 3.687115] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch [ 3.687118] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch [ 3.687121] [drm:intel_crtc_set_config], attempting to set mode from userspace [ 3.687127] [drm:drm_mode_debug_printmodeline], Modeline 29:"1366x768" 60 77000 1366 1401 1513 1641 768 769 771 780 0x8 0xa [ 3.687133] [drm:intel_set_mode], set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 3.687142] [drm:intel_modeset_adjusted_mode], [CRTC:3] [ 3.721350] [drm:intel_enable_rc6], Sandybridge: deep RC6 disabled [ 3.721352] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 3.766094] usb 6-1.3.1: New USB device found, idVendor=0d8c, idProduct=0105 [ 3.766100] usb 6-1.3.1: New USB device strings: Mfr=3, Product=1, SerialNumber=0 [ 3.766104] usb 6-1.3.1: Product: USB Multimedia Audio Device [ 3.766109] usb 6-1.3.1: Manufacturer: C-Media Electronics Inc. [ 3.768022] input: C-Media Electronics Inc. USB Multimedia Audio Device as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.3/6-1.3.1/6-1.3.1:1.3/input/input16 [ 3.768428] hid-generic 0003:0D8C:0105.0004: input,hidraw3: USB HID v1.00 Device [C-Media Electronics Inc. USB Multimedia Audio Device] on usb-0000:00:1d.0-1.3.1/input3 [ 3.788090] ------------[ cut here ]------------ [ 3.788135] WARNING: at drivers/gpu/drm/i915/intel_display.c:1028 intel_wait_for_pipe_off+0x14c/0x169 [i915]() [ 3.788137] Hardware name: dynabook R731/W2UB [ 3.788138] pipe_off wait timed out [ 3.788190] Modules linked in: fbcon(+) bitblit softcursor font i2400m_usb(+) i2400m wimax btusb bluetooth hid_generic usbhid snd_hda_codec_hdmi snd_hda_codec_realtek arc4 iwldvm mac80211 i915 i2c_algo_bit snd_hda_intel intel_agp intel_gtt snd_hda_codec sr_mod drm_kms_helper snd_hwdep cdrom iwlwifi snd_pcm sdhci_pci snd_page_alloc crc32c_intel drm e1000e cfg80211 pata_jmicron video ehci_pci snd_timer agpgart sdhci toshiba_acpi xhci_hcd ehci_hcd mmc_core sparse_keymap snd led_class usbcore usb_common joydev wmi toshiba_bluetooth rfkill [ 3.788195] Pid: 1378, comm: modprobe Tainted: G W 3.8.0-r1 #1 [ 3.788196] Call Trace: [ 3.788212] [] warn_slowpath_common+0x7e/0x96 [ 3.788219] [] warn_slowpath_fmt+0x41/0x43 [ 3.788246] [] intel_wait_for_pipe_off+0x14c/0x169 [i915] [ 3.788270] [] intel_disable_pipe+0x146/0x14e [i915] [ 3.788292] [] ironlake_crtc_disable+0xc6/0x769 [i915] [ 3.788296] [] ? vprintk+0x18/0x1a [ 3.788319] [] ? drm_ut_debug_printk+0x52/0x59 [drm] [ 3.788347] [] intel_set_mode+0x3d5/0x7fc [i915] [ 3.788374] [] intel_crtc_set_config+0x602/0x733 [i915] [ 3.788384] [] drm_fb_helper_set_par+0x69/0xb2 [drm_kms_helper] [ 3.788393] [] fbcon_init+0x30e/0x409 [fbcon] [ 3.788400] [] visual_init+0xb8/0x10e [ 3.788405] [] bind_con_driver+0x1af/0x2af [ 3.788410] [] ? 0xffffffffa04cbfff [ 3.788415] [] take_over_console+0x38/0x45 [ 3.788422] [] fbcon_takeover+0x4f/0x7d [fbcon] [ 3.788429] [] fb_console_init+0x118/0x11f [fbcon] [ 3.788433] [] ? 0xffffffffa04cbfff [ 3.788439] [] do_one_initcall+0x7a/0x134 [ 3.788445] [] load_module+0x1641/0x193d [ 3.788449] [] ? sys_getegid16+0x44/0x44 [ 3.788456] [] ? page_fault+0x28/0x30 [ 3.788461] [] sys_init_module+0xa9/0xab [ 3.788468] [] system_call_fastpath+0x16/0x1b [ 3.788472] ---[ end trace 935c32344ecc0b0c ]--- [ 3.814525] usbcore: registered new interface driver snd-usb-audio [ 3.838999] [drm:ironlake_disable_pch_transcoder] *ERROR* failed to disable transcoder 0 [ 3.839216] [drm:intel_update_fbc], no output, disabling [ 3.839230] [drm:ironlake_get_refclk], using SSC reference clock of 120 MHz [ 3.839264] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6) [ 3.839268] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 6) [ 3.839271] [drm:ironlake_crtc_mode_set], Mode for pipe 0: [ 3.839279] [drm:drm_mode_debug_printmodeline], Modeline 29:"1366x768" 60 77000 1366 1401 1513 1641 768 769 771 780 0x8 0xa [ 3.839283] [drm:intel_get_pch_pll], CRTC:3 allocated PCH PLL c6014 [ 3.839286] [drm:intel_get_pch_pll], using pll 0 for pipe 0 [ 3.839289] [drm:intel_get_pch_pll], switching PLL c6014 off [ 3.839604] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe 0, lanes 1 [ 3.841116] usb 6-1.3.2: new full-speed USB device number 7 using ehci-pci [ 3.891023] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 3.891037] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 7680 [ 3.891042] [drm:intel_update_fbc], no output, disabling [ 3.891051] [drm:intel_crtc_mode_set], [ENCODER:8:LVDS-8] set [MODE:29:1366x768] [ 3.891057] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 3.891062] [drm:ironlake_check_srwm], watermark 1: display plane 10, fbc lines 3, cursor 6 [ 3.891067] [drm:ironlake_check_srwm], watermark 2: display plane 12, fbc lines 3, cursor 6 [ 3.891071] [drm:ironlake_check_srwm], watermark 3: display plane 55, fbc lines 3, cursor 6 [ 3.927436] usb 6-1.3.2: New USB device found, idVendor=067b, idProduct=2303 [ 3.927443] usb 6-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.927447] usb 6-1.3.2: Product: USB-Serial Controller D [ 3.927450] usb 6-1.3.2: Manufacturer: Prolific Technology Inc. [ 3.943878] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 3.995849] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 3.996669] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x700 [ 3.996672] [drm:gen6_fdi_link_train], FDI train 1 done. [ 3.997329] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 3.997332] [drm:gen6_fdi_link_train], FDI train 2 done. [ 3.997334] [drm:gen6_fdi_link_train], FDI train done. [ 3.997339] [drm:ironlake_enable_pch_pll], enable PCH PLL c6014 (active 0, on? 0)for crtc 3 [ 3.997343] [drm:ironlake_enable_pch_pll], enabling PCH PLL c6014 [ 3.998570] [drm:intel_update_fbc], fbc set to per-chip default [ 3.998573] [drm:intel_update_fbc], fbc disabled per module param [ 3.999786] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4539 [ 4.015835] [drm:intel_connector_check_state], [CONNECTOR:7:LVDS-1] [ 4.015850] [drm:intel_modeset_check_state], [ENCODER:8:LVDS-8] [ 4.015857] [drm:intel_modeset_check_state], [ENCODER:12:DAC-12] [ 4.015861] [drm:intel_modeset_check_state], [ENCODER:13:TMDS-13] [ 4.015866] [drm:intel_modeset_check_state], [ENCODER:17:TMDS-17] [ 4.015870] [drm:intel_modeset_check_state], [ENCODER:19:TMDS-19] [ 4.015874] [drm:intel_modeset_check_state], [ENCODER:21:TMDS-21] [ 4.015878] [drm:intel_modeset_check_state], [ENCODER:23:TMDS-23] [ 4.015881] [drm:intel_modeset_check_state], [ENCODER:25:TMDS-25] [ 4.015885] [drm:intel_modeset_check_state], [CRTC:3] [ 4.015888] [drm:intel_modeset_check_state], [CRTC:5] [ 4.015896] [drm:intel_crtc_set_config], [CRTC:5] [FB:43] #connectors=1 (x y) (0 0) [ 4.015901] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set [ 4.015905] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 4.015911] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 4.015918] [drm:drm_mode_debug_printmodeline], Modeline 36:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 4.015922] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch [ 4.015926] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 4.015931] [drm:intel_modeset_stage_output_state], [CONNECTOR:22:HDMI-A-3] to [CRTC:5] [ 4.015934] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch [ 4.015937] [drm:intel_crtc_set_config], attempting to set mode from userspace [ 4.015943] [drm:drm_mode_debug_printmodeline], Modeline 36:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 4.015947] [drm:intel_set_mode], set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 4.015956] [drm:intel_modeset_adjusted_mode], [CRTC:5] [ 4.016023] [drm:intel_choose_pipe_bpp_dither], forcing bpc to 8 for HDMI [ 4.016027] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8) [ 4.016030] [drm:ironlake_crtc_mode_set], Mode for pipe 1: [ 4.016036] [drm:drm_mode_debug_printmodeline], Modeline 36:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 4.016041] [drm:intel_get_pch_pll], CRTC:5 allocated PCH PLL c6018 [ 4.016044] [drm:intel_get_pch_pll], using pll 1 for pipe 1 [ 4.016046] [drm:intel_get_pch_pll], switching PLL c6018 off [ 4.016361] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe 1, lanes 2 [ 4.067804] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 4.067818] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 7680 [ 4.067823] [drm:intel_update_fbc], fbc set to per-chip default [ 4.067826] [drm:intel_update_fbc], fbc disabled per module param [ 4.067831] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 4.067837] [drm:ironlake_check_srwm], watermark 1: display plane 10, fbc lines 3, cursor 6 [ 4.067841] [drm:ironlake_check_srwm], watermark 2: display plane 12, fbc lines 3, cursor 6 [ 4.067846] [drm:ironlake_check_srwm], watermark 3: display plane 55, fbc lines 3, cursor 6 [ 4.067853] [drm:intel_crtc_mode_set], [ENCODER:21:TMDS-21] set [MODE:36:1920x1080] [ 4.067862] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 4.067865] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 4.119669] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 4.171658] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 4.172475] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100 [ 4.172478] [drm:gen6_fdi_link_train], FDI train 1 done. [ 4.173135] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 4.173138] [drm:gen6_fdi_link_train], FDI train 2 done. [ 4.173140] [drm:gen6_fdi_link_train], FDI train done. [ 4.173145] [drm:ironlake_enable_pch_pll], enable PCH PLL c6018 (active 0, on? 0)for crtc 5 [ 4.173149] [drm:ironlake_enable_pch_pll], enabling PCH PLL c6018 [ 4.174377] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 4.194600] [drm:intel_connector_check_state], [CONNECTOR:7:LVDS-1] [ 4.194613] [drm:intel_connector_check_state], [CONNECTOR:22:HDMI-A-3] [ 4.194620] [drm:intel_modeset_check_state], [ENCODER:8:LVDS-8] [ 4.194626] [drm:intel_modeset_check_state], [ENCODER:12:DAC-12] [ 4.194631] [drm:intel_modeset_check_state], [ENCODER:13:TMDS-13] [ 4.194635] [drm:intel_modeset_check_state], [ENCODER:17:TMDS-17] [ 4.194640] [drm:intel_modeset_check_state], [ENCODER:19:TMDS-19] [ 4.194643] [drm:intel_modeset_check_state], [ENCODER:21:TMDS-21] [ 4.194647] [drm:intel_modeset_check_state], [ENCODER:23:TMDS-23] [ 4.194651] [drm:intel_modeset_check_state], [ENCODER:25:TMDS-25] [ 4.194655] [drm:intel_modeset_check_state], [CRTC:3] [ 4.194658] [drm:intel_modeset_check_state], [CRTC:5] [ 4.194739] [drm:intel_crtc_set_config], [CRTC:3] [FB:43] #connectors=1 (x y) (0 0) [ 4.194751] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 4.194757] [drm:intel_modeset_stage_output_state], [CONNECTOR:22:HDMI-A-3] to [CRTC:5] [ 4.194766] [drm:intel_crtc_set_config], [CRTC:5] [FB:43] #connectors=1 (x y) (0 0) [ 4.194776] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 4.194780] [drm:intel_modeset_stage_output_state], [CONNECTOR:22:HDMI-A-3] to [CRTC:5] [ 4.205454] Console: switching to colour frame buffer device 170x48 [ 4.205479] [drm:intel_crtc_set_config], [CRTC:3] [FB:43] #connectors=1 (x y) (0 0) [ 4.205486] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 4.205490] [drm:intel_modeset_stage_output_state], [CONNECTOR:22:HDMI-A-3] to [CRTC:5] [ 4.205495] [drm:intel_crtc_set_config], [CRTC:5] [FB:43] #connectors=1 (x y) (0 0) [ 4.205511] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 4.205517] [drm:intel_modeset_stage_output_state], [CONNECTOR:22:HDMI-A-3] to [CRTC:5] [ 4.379262] vboxdrv: Found 4 processor cores. [ 4.379611] vboxdrv: fAsync=0 offMin=0x40f offMax=0x2fc7 [ 4.379741] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 4.379749] vboxdrv: Successfully loaded version 4.2.6 (interface 0x001a0004). [ 4.525911] device-mapper: uevent: version 1.0.3 [ 4.526408] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com [ 4.681924] EXT4-fs (sda4): re-mounted. Opts: user_xattr,acl,discard