[ 0.000000] Linux version 2.6.19 (root@phobos) (gcc version 4.1.1 (Gentoo 4.1.1)) #1 PREEMPT Mon Dec 4 09:32:06 CET 2006 [ 0.000000] Command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/md0 splash=silent,theme:default CONSOLE=/dev/tty1 vga=791 pci=nomsi [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) [ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 524208) 1 entries of 256 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fa850 [ 0.000000] ACPI: XSDT (v001 A M I OEMXSDT 0x06000619 MSFT 0x00000097) @ 0x000000007ffb0100 [ 0.000000] ACPI: FADT (v003 A M I OEMFACP 0x06000619 MSFT 0x00000097) @ 0x000000007ffb0290 [ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x06000619 MSFT 0x00000097) @ 0x000000007ffb0390 [ 0.000000] ACPI: MCFG (v001 A M I OEMMCFG 0x06000619 MSFT 0x00000097) @ 0x000000007ffb0400 [ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x06000619 MSFT 0x00000097) @ 0x000000007ffbe040 [ 0.000000] ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @ 0x0000000000000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 524208) 1 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 524208 [ 0.000000] On node 0 totalpages: 524111 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1721 pages reserved [ 0.000000] DMA zone: 2222 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7110 pages used for memmap [ 0.000000] DMA32 zone: 513002 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 2, address 0xfecc0000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e4000 [ 0.000000] Nosave address range: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) [ 0.000000] Built 1 zonelists. Total pages: 515224 [ 0.000000] Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/md0 splash=silent,theme:default CONSOLE=/dev/tty1 vga=791 pci=nomsi [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 26.924480] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. [ 26.924482] time.c: Detected 2400.209 MHz processor. [ 26.924516] Console: colour dummy device 80x25 [ 26.926106] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 26.928345] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 26.929055] Checking aperture... [ 26.929064] CPU 0: aperture @ f0000000 size 128 MB [ 26.949478] Memory: 2053524k/2096832k available (4414k kernel code, 42476k reserved, 1701k data, 240k init) [ 27.009317] Calibrating delay using timer specific routine.. 4801.41 BogoMIPS (lpj=2400705) [ 27.009346] Security Framework v1.0.0 initialized [ 27.009354] Capability LSM initialized [ 27.009367] Mount-cache hash table entries: 256 [ 27.009461] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 27.009466] CPU: L2 Cache: 512K (64 bytes/line) [ 27.009482] CPU: AMD Athlon(tm) 64 Processor 3800+ stepping 00 [ 27.009493] ACPI: Core revision 20060707 [ 27.022099] Using local APIC timer interrupts. [ 27.063706] result 12501101 [ 27.063710] Detected 12.501 MHz APIC timer. [ 27.064233] testing NMI watchdog ... OK. [ 27.074295] checking if image is initramfs... it is [ 27.282935] Freeing initrd memory: 3757k freed [ 27.285781] NET: Registered protocol family 16 [ 27.285858] ACPI: bus type pci registered [ 27.285870] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved [ 27.285874] PCI: Not using MMCONFIG. [ 27.285878] PCI: Using configuration type 1 [ 27.291163] ACPI: Interpreter enabled [ 27.291172] ACPI: Using IOAPIC for interrupt routing [ 27.292074] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 27.292081] PCI: Probing PCI hardware (bus 00) [ 27.295181] Boot video device is 0000:02:00.0 [ 27.295378] PCI: Transparent bridge - 0000:00:13.1 [ 27.295418] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 27.315836] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 27.315932] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] [ 27.320102] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 27.320232] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] [ 27.321116] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 27.321316] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 27.321511] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 27.321706] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 27.321924] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 27.322122] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 27.322320] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 27.322517] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 27.322583] Linux Plug and Play Support v0.97 (c) Adam Belay [ 27.322597] pnp: PnP ACPI init [ 27.325029] pnp: PnP ACPI: found 12 devices [ 27.325131] SCSI subsystem initialized [ 27.325160] libata version 2.00 loaded. [ 27.325205] usbcore: registered new interface driver usbfs [ 27.325234] usbcore: registered new interface driver hub [ 27.325262] usbcore: registered new device driver usb [ 27.325297] PCI: Using ACPI for IRQ routing [ 27.325302] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 27.325318] PCI: Cannot allocate resource region 0 of device 0000:00:00.0 [ 27.325407] NetLabel: Initializing [ 27.325411] NetLabel: domain hash size = 128 [ 27.325415] NetLabel: protocols = UNLABELED CIPSOv4 [ 27.325429] NetLabel: unlabeled traffic allowed by default [ 27.325472] PCI-DMA: Disabling IOMMU. [ 27.326189] pnp: 00:05: ioport range 0x290-0x297 has been reserved [ 27.326232] PCI: Bridge: 0000:00:01.0 [ 27.326236] IO window: disabled. [ 27.326242] MEM window: disabled. [ 27.326247] PREFETCH window: disabled. [ 27.326253] PCI: Bridge: 0000:00:02.0 [ 27.326256] IO window: disabled. [ 27.326263] MEM window: daf00000-dfffffff [ 27.326269] PREFETCH window: c0000000-cfffffff [ 27.326276] PCI: Bridge: 0000:00:13.0 [ 27.326279] IO window: disabled. [ 27.326284] MEM window: disabled. [ 27.326289] PREFETCH window: disabled. [ 27.326295] PCI: Bridge: 0000:00:13.1 [ 27.326299] IO window: e000-efff [ 27.326305] MEM window: disabled. [ 27.326309] PREFETCH window: disabled. [ 27.326327] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 27.326343] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27 [ 27.326352] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 27.326359] PCI: Setting latency timer of device 0000:00:13.0 to 64 [ 27.326365] PCI: Setting latency timer of device 0000:00:13.1 to 64 [ 27.326383] NET: Registered protocol family 2 [ 27.335804] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 27.336213] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 27.337710] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 27.338084] TCP: Hash tables configured (established 262144 bind 65536) [ 27.338089] TCP reno registered [ 27.338547] audit: initializing netlink socket (disabled) [ 27.338559] audit(1165792744.372:1): initialized [ 27.338597] Total HugeTLB memory allocated, 0 [ 27.338669] VFS: Disk quotas dquot_6.5.1 [ 27.338687] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 27.338784] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 27.338941] NTFS driver 2.1.27 [Flags: R/W]. [ 27.338961] fuse init (API version 7.7) [ 27.339019] JFS: nTxBlock = 8192, nTxLock = 65536 [ 27.343190] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 27.343300] SGI XFS Quota Management subsystem [ 27.343340] io scheduler noop registered [ 27.343345] io scheduler anticipatory registered [ 27.343349] io scheduler deadline registered [ 27.343357] io scheduler cfq registered (default) [ 27.343875] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 27.343916] assign_interrupt_mode Found MSI capability [ 27.343925] Allocate Port Service[0000:00:02.0:pcie00] [ 27.343953] Allocate Port Service[0000:00:02.0:pcie02] [ 27.361422] Real Time Clock Driver v1.12ac [ 27.361432] Linux agpgart interface v0.101 (c) Dave Jones [ 27.361516] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20000600000, using 3072k, total 262144k [ 27.361525] vesafb: mode is 1024x768x16, linelength=2048, pages=1 [ 27.361529] vesafb: scrolling: redraw [ 27.361533] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 27.374636] Console: switching to colour frame buffer device 128x48 [ 27.386519] fb0: VESA VGA frame buffer device [ 27.386665] vga16fb: initializing [ 27.386669] vga16fb: mapped to 0xffff8100000a0000 [ 27.386813] fb1: VGA16 VGA frame buffer device [ 27.386953] ACPI: Power Button (FF) [PWRF] [ 27.387073] ACPI: Sleep Button (CM) [SLPB] [ 27.387178] ACPI: Power Button (CM) [PWRB] [ 27.387363] Using specific hotkey driver [ 27.387717] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 27.387856] ACPI: Processor [CPU1] (supports 16 throttling states) [ 27.388019] ACPI: Getting cpuindex for acpiid 0x2 [ 27.388147] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 30.394630] floppy0: no floppy controllers found [ 30.395102] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize [ 30.395462] loop: loaded (max 8 devices) [ 30.395560] Compaq SMART2 Driver (v 2.6.0) [ 30.395692] HP CISS Driver (v 3.6.10) [ 30.396017] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 30.396176] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 30.398548] st: Version 20050830, fixed bufsize 32768, s/g segs 256 [ 30.400973] osst :I: Tape driver with OnStream support version 0.99.4 [ 30.400975] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 30.406190] SCSI Media Changer driver v0.25 [ 30.408925] ahci 0000:00:0f.0: version 2.0 [ 30.408946] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21 [ 31.410945] ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 31.414030] ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part [ 31.417307] ata1: SATA max UDMA/133 cmd 0xFFFFC200005BCD00 ctl 0x0 bmdma 0x0 irq 21 [ 31.420711] ata2: SATA max UDMA/133 cmd 0xFFFFC200005BCD80 ctl 0x0 bmdma 0x0 irq 21 [ 31.424127] ata3: SATA max UDMA/133 cmd 0xFFFFC200005BCE00 ctl 0x0 bmdma 0x0 irq 21 [ 31.427564] ata4: SATA max UDMA/133 cmd 0xFFFFC200005BCE80 ctl 0x0 bmdma 0x0 irq 21 [ 31.430942] scsi0 : ahci [ 31.891119] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 31.895215] ata1.00: ATA-7, max UDMA/133, 240121728 sectors: LBA [ 31.898914] ata1.00: ata1: dev 0 multi count 0 [ 31.903273] ata1.00: configured for UDMA/133 [ 31.907087] scsi1 : ahci [ 32.367319] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 32.371842] ata2.00: ATA-7, max UDMA/133, 240121728 sectors: LBA [ 32.375981] ata2.00: ata2: dev 0 multi count 0 [ 32.380780] ata2.00: configured for UDMA/133 [ 32.385031] scsi2 : ahci [ 32.691762] ata3: SATA link down (SStatus 0 SControl 300) [ 32.696206] Losing some ticks... checking if CPU frequency changed. [ 32.696214] scsi3 : ahci [ 33.002241] ata4: SATA link down (SStatus 0 SControl 300) [ 33.006707] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y120M0 YAR5 PQ: 0 ANSI: 5 [ 33.011300] SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) [ 33.015855] sda: Write Protect is off [ 33.020375] sda: Mode Sense: 00 3a 00 00 [ 33.020386] SCSI device sda: drive cache: write back [ 33.025038] SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) [ 33.029764] sda: Write Protect is off [ 33.034467] sda: Mode Sense: 00 3a 00 00 [ 33.034478] SCSI device sda: drive cache: write back [ 33.039214] sda: sda1 sda2 [ 33.081032] sd 0:0:0:0: Attached scsi disk sda [ 33.085761] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 33.090406] scsi 1:0:0:0: Direct-Access ATA Maxtor 6Y120M0 YAR5 PQ: 0 ANSI: 5 [ 33.095120] SCSI device sdb: 240121728 512-byte hdwr sectors (122942 MB) [ 33.099750] sdb: Write Protect is off [ 33.104283] sdb: Mode Sense: 00 3a 00 00 [ 33.104294] SCSI device sdb: drive cache: write back [ 33.108912] SCSI device sdb: 240121728 512-byte hdwr sectors (122942 MB) [ 33.113569] sdb: Write Protect is off [ 33.118153] sdb: Mode Sense: 00 3a 00 00 [ 33.118163] SCSI device sdb: drive cache: write back [ 33.122703] sdb: sdb1 sdb2 [ 33.184945] sd 1:0:0:0: Attached scsi disk sdb [ 33.189387] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 33.193885] pata_via 0000:00:0f.1: version 0.1.14 [ 33.193893] via: Unknown VIA SouthBridge, disabling. [ 33.198239] I2O subsystem v1.325 [ 33.202478] i2o: max drivers = 8 [ 33.206668] I2O Configuration OSM v1.323 [ 33.210795] I2O Bus Adapter OSM v1.317 [ 33.214819] I2O Block Device OSM v1.325 [ 33.218923] I2O SCSI Peripheral OSM v1.316 [ 33.223038] I2O ProcFS OSM v1.316 [ 33.227188] Fusion MPT base driver 3.04.02 [ 33.231265] Copyright (c) 1999-2005 LSI Logic Corporation [ 33.235370] Fusion MPT SPI Host driver 3.04.02 [ 33.239467] Fusion MPT FC Host driver 3.04.02 [ 33.243527] Fusion MPT SAS Host driver 3.04.02 [ 33.247585] Fusion MPT misc device (ioctl) driver 3.04.02 [ 33.251662] mptctl: Registered with Fusion MPT base driver [ 33.255719] mptctl: /dev/mptctl @ (major,minor=10,220) [ 33.259760] Initializing USB Mass Storage driver... [ 33.263791] usbcore: registered new interface driver usb-storage [ 33.267887] USB Mass Storage support registered. [ 33.272005] usbcore: registered new interface driver libusual [ 33.276157] usbcore: registered new interface driver hiddev [ 33.280237] usbcore: registered new interface driver usbhid [ 33.284229] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 33.288250] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 33.292486] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 33.296477] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 33.300493] mice: PS/2 mouse device common for all mice [ 33.304434] mk712: device not present [ 33.308289] md: linear personality registered for level -1 [ 33.312185] md: raid0 personality registered for level 0 [ 33.316087] md: raid1 personality registered for level 1 [ 33.319925] md: raid10 personality registered for level 10 [ 33.340692] raid6: int64x1 2195 MB/s [ 33.360650] raid6: int64x2 2785 MB/s [ 33.380612] raid6: int64x4 2699 MB/s [ 33.400571] raid6: int64x8 1914 MB/s [ 33.420552] raid6: sse2x1 2550 MB/s [ 33.440510] raid6: sse2x2 3785 MB/s [ 33.460470] raid6: sse2x4 4207 MB/s [ 33.463744] raid6: using algorithm sse2x4 (4207 MB/s) [ 33.467041] md: raid6 personality registered for level 6 [ 33.470362] md: raid5 personality registered for level 5 [ 33.473655] md: raid4 personality registered for level 4 [ 33.476869] raid5: automatically using best checksumming function: generic_sse [ 33.484423] generic_sse: 7500.000 MB/sec [ 33.487749] raid5: using function: generic_sse (7500.000 MB/sec) [ 33.491171] md: multipath personality registered for level -4 [ 33.494644] md: faulty personality registered for level -5 [ 33.498218] device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com [ 33.501990] Advanced Linux Sound Architecture Driver Version 1.0.13 (Tue Nov 28 14:07:24 2006 UTC). [ 33.505832] ALSA device list: [ 33.509621] No soundcards found. [ 33.513411] TCP bic registered [ 33.517117] NET: Registered protocol family 1 [ 33.520883] NET: Registered protocol family 10 [ 33.524647] lo: Disabled Privacy Extensions [ 33.528396] IPv6 over IPv4 tunneling driver [ 33.532112] NET: Registered protocol family 17 [ 33.536842] input: AT Translated Set 2 keyboard as /class/input/input0 [ 33.582262] Bridge firewalling registered [ 33.586013] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors (version 2.00.00) [ 33.589964] powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6 [ 33.593801] powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8 [ 33.597666] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa [ 33.601526] powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc [ 33.605294] powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 [ 33.609133] ACPI: (supports S0 S1 S3 S4 S5) [ 33.612745] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 33.616497] Freeing unused kernel memory: 240k freed [ 33.744567] ata1: hard resetting port [ 33.812291] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 22 [ 33.812297] PCI: VIA IRQ fixup for 0000:00:10.4, from 3 to 6 [ 33.812402] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 33.812504] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 33.812536] ehci_hcd 0000:00:10.4: debug port 1 [ 33.812546] ehci_hcd 0000:00:10.4: irq 22, io mem 0xdaeff800 [ 33.812553] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 33.812652] usb usb1: configuration #1 chosen from 1 choice [ 33.812682] hub 1-0:1.0: USB hub found [ 33.812688] hub 1-0:1.0: 8 ports detected [ 33.933516] USB Universal Host Controller Interface driver v3.0 [ 33.933583] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 33.933588] PCI: VIA IRQ fixup for 0000:00:10.0, from 5 to 4 [ 33.933612] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 33.933657] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 33.933693] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000c000 [ 33.933796] usb usb2: configuration #1 chosen from 1 choice [ 33.933826] hub 2-0:1.0: USB hub found [ 33.933832] hub 2-0:1.0: 2 ports detected [ 34.034575] ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 22 [ 34.034580] PCI: VIA IRQ fixup for 0000:00:10.1, from 3 to 6 [ 34.034601] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 34.034630] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 34.034648] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000b800 [ 34.034732] usb usb3: configuration #1 chosen from 1 choice [ 34.034759] hub 3-0:1.0: USB hub found [ 34.034763] hub 3-0:1.0: 2 ports detected [ 34.118363] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 34.135399] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 [ 34.135404] PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 5 [ 34.135424] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 34.135452] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 34.135470] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b400 [ 34.135555] usb usb4: configuration #1 chosen from 1 choice [ 34.135581] hub 4-0:1.0: USB hub found [ 34.135587] hub 4-0:1.0: 2 ports detected [ 34.203230] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 34.204331] ata1.00: configured for UDMA/133 [ 34.204335] ata1: EH complete [ 34.204363] SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) [ 34.204371] sda: Write Protect is off [ 34.204373] sda: Mode Sense: 00 3a 00 00 [ 34.204383] SCSI device sda: drive cache: write back [ 34.233028] usb 1-1: configuration #1 chosen from 1 choice [ 34.233154] scsi4 : SCSI emulation for USB Mass Storage devices [ 34.233217] usb-storage: device found at 2 [ 34.233219] usb-storage: waiting for device to settle before scanning [ 34.236239] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 23 [ 34.236247] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 34.236282] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 34.236304] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000b000 [ 34.236395] usb usb5: configuration #1 chosen from 1 choice [ 34.236425] hub 5-0:1.0: USB hub found [ 34.236431] hub 5-0:1.0: 2 ports detected [ 34.351213] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 34.366955] sl811: driver sl811-hcd, 19 May 2005 [ 34.438825] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 34.510332] input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 [ 34.535061] ieee1394: Initialized config rom entry `ip1394' [ 34.553110] usb 1-2: configuration #1 chosen from 1 choice [ 34.553178] hub 1-2:1.0: USB hub found [ 34.553275] hub 1-2:1.0: 4 ports detected [ 34.570153] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [ 34.570157] ieee1394: sbp2: Try serialize_io=0 for better performance [ 35.641255] md: Autodetecting RAID arrays. [ 35.665854] md: autorun ... [ 35.665856] md: considering sdb1 ... [ 35.665862] md: adding sdb1 ... [ 35.665865] md: adding sda1 ... [ 35.665868] md: created md0 [ 35.665870] md: bind [ 35.665878] md: bind [ 35.665884] md: running: [ 35.669897] raid1: raid set md0 active with 2 out of 2 mirrors [ 35.670045] md: ... autorun DONE. [ 35.708135] ReiserFS: md0: found reiserfs format "3.6" with standard journal [ 35.708147] ReiserFS: md0: using ordered data mode [ 35.741635] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 35.742956] ReiserFS: md0: journal params: device md0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 35.744721] ReiserFS: md0: checking transaction log (md0) [ 35.889349] ReiserFS: md0: Using r5 hash to sort names [ 35.949059] usb 5-2: configuration #1 chosen from 1 choice [ 35.951815] scsi5 : SCSI emulation for USB Mass Storage devices [ 35.952093] usb-storage: device found at 2 [ 35.952094] usb-storage: waiting for device to settle before scanning [ 36.118099] usb 1-2.2: new low speed USB device using ehci_hcd and address 5 [ 36.223824] usb 1-2.2: configuration #1 chosen from 1 choice [ 39.227402] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL10 PQ: 0 ANSI: 0 [ 39.252482] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 39.252485] Uniform CD-ROM driver Revision: 3.20 [ 39.252520] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 39.252551] sr 4:0:0:0: Attached scsi generic sg2 type 5 [ 39.252753] usb-storage: device scan complete [ 40.963699] scsi 5:0:0:0: Direct-Access TEAC FD-05PUB 3000 PQ: 0 ANSI: 0 CCS [ 41.059594] sd 5:0:0:0: Attached scsi removable disk sdc [ 41.059632] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 41.094518] usb-storage: device scan complete [ 44.729126] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 44.784007] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 46.143682] input: PC Speaker as /class/input/input2 [ 46.944866] via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker [ 46.947100] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 46.948847] eth0: VIA Rhine II at 0x1a800, 00:17:31:0b:2f:03, IRQ 23. [ 46.949784] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link c5e1. [ 47.942689] nvidia: module license 'NVIDIA' taints kernel. [ 48.201452] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 24 [ 48.201462] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 48.201591] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9742 Tue Nov 7 09:45:02 PST 2006 [ 49.647572] ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 49.649984] Audigy2 value: Special config. [ 56.460496] input: X10 Wireless Technology Inc iver as /class/input/input3 [ 56.460754] usbcore: registered new interface driver ati_remote [ 56.460757] drivers/usb/input/ati_remote.c: Registered USB driver ATI/X10 RF USB Remote Control v. 2.2.1 [ 56.468324] drivers/usb/input/ati_remote.c: Weird data, len=1 ff 00 00 00 00 00 ... [ 61.596375] Adding 1269124k swap on /dev/sda2. Priority:-1 extents:1 across:1269124k [ 61.597146] Adding 1269124k swap on /dev/sdb2. Priority:-2 extents:1 across:1269124k [ 70.543779] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 81.040462] eth0: no IPv6 routers present [ 110.232716] NET: Registered protocol family 4 [ 110.307991] NET: Registered protocol family 5