Linux version 2.4.23-pre3-xcs (sziwan@nadir) (gcc version 3.2.3) #2 Sun Sep 7 22:29:27 CEST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff9000 (usable) BIOS-e820: 000000000fff9000 - 000000000ffff000 (ACPI data) BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 255MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 65529 zone(0): 4096 pages. zone(1): 61433 pages. zone(2): 0 pages. ACPI: RSDP (v000 ASUS ) @ 0x000f6890 ACPI: RSDT (v001 ASUS P4_L3CS 0x42302e31 MSFT 0x31313031) @ 0x0fff9000 ACPI: FADT (v001 ASUS P4_L3CS 0x42302e31 MSFT 0x31313031) @ 0x0fff9080 ACPI: BOOT (v001 ASUS P4_L3CS 0x42302e31 MSFT 0x31313031) @ 0x0fff9040 ACPI: DSDT (v001 ASUS P4_L3CS 0x00001000 MSFT 0x0100000d) @ 0x00000000 Kernel command line: auto BOOT_IMAGE=TESTING ro root=305 resume=/dev/hda1 Swsusp 1.1-rc8E: Resume device set to 0x301. Initializing CPU#0 Detected 1200.091 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2392.06 BogoMIPS Memory: 255836k/262116k available (1720k kernel code, 5892k reserved, 512k data, 92k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febf9ff 00000000 00000000 00000000 CPU: Common caps: 3febf9ff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.70GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030813 PCI: PCI BIOS revision 2.10 entry at 0xf0e40, last bus=2 PCI: Using configuration type 1 tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:.............................................................................................................................................................................................................................................................. Table [DSDT](id F004) - 761 Objects with 59 Devices 254 Methods 26 Regions ACPI Namespace successfully loaded at root c03d6bbc evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful evgpeblk-0748 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at 000000000000E428 on int 9 evgpeblk-0748 [06] ev_create_gpe_block : GPE 16 to 31 [_GPE] 2 regs at 000000000000E42C on int 9 Completing Region/Field/Buffer/Package initialization:.................................................................................. Initialized 26/26 Regions 0/0 Fields 23/23 Buffers 33/33 Packages (769 nodes) Executing all Device _STA and_INI methods:............................................................ 60 Devices found containing: 60 _STA, 5 _INI methods ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S3 (swsusp) S4 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs *5) ACPI: PCI Interrupt Link [LNKB] (IRQs 7 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 11, enabled at IRQ 9) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 11, enabled at IRQ 9) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI: Embedded Controller [ECD0] (gpe 28) schedule_task(): keventd has not started ACPI: Power Resource [PRCF] (on) PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 SGI XFS snapshot 2.4.22-2003-09-03_04:09_UTC with no debug enabled ACPI: AC Adapter [ACAD] (off-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Lid Switch [LIDD] ACPI: Fan [CFAN] (on) ACPI: Processor [CPU0] (supports C1 C2, 2 performance states, 8 throttling states) ACPI: Thermal Zone [THRM] (42 C) radeonfb: ref_clk=2700, ref_div=12, xclk=18300 from BIOS radeonfb: panel ID string: Samsung LTN150P1-L02 radeonfb: detected LCD panel size from BIOS: 1400x1050 Console: switching to colour frame buffer device 175x65 radeonfb: ATI Radeon M7 LW DDR SGRAM 32 MB radeonfb: DVI port LCD monitor connected radeonfb: CRT port no monitor connected pty: 256 Unix98 ptys configured Real Time Clock Driver v1.10e Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3M: IDE controller at PCI slot 00:1f.1 ICH3M: chipset revision 2 ICH3M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x8400-0x8407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x8408-0x840f, BIOS settings: hdc:DMA, hdd:pio hda: IC25N040ATCS04-0, ATA DISK drive blk: queue c03eccc0, I/O limit 4095Mb (mask 0xffffffff) hdc: TOSHIBA DVD-ROM SD-R2212, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 78140160 sectors (40008 MB) w/1768KiB Cache, CHS=4864/255/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 > p4 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Swsusp 1.1-rc8E: Resuming from /dev/hda1 Resume Machine: This is normal swap space Swsusp 1.1-rc8E: kswsuspd starting XFS mounting filesystem ide0(3,5) Starting XFS recovery on filesystem: ide0(3,5) (dev: 3/5) Ending XFS recovery on filesystem: ide0(3,5) (dev: 3/5) VFS: Mounted root (xfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 92k freed Adding Swap: 393552k swap-space (priority -1) XFS mounting filesystem ide0(3,6) Ending clean XFS mount for filesystem: ide0(3,6) Asus Laptop ACPI Extras version 0.24a L3C model detected, supported Notify Handler installed successfully Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Enabling device 02:07.1 (0000 -> 0002) Yenta IRQ list 0498, PCI irq5 Socket status: 30000006 Yenta IRQ list 0498, PCI irq11 Socket status: 30000006 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x2f8-0x2ff 0x378-0x37f 0x3f8-0x3ff 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. ohci1394: $Rev: 1010 $ Ben Collins ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[9] MMIO=[d6000000-d60007ff] Max Packet=[2048] 8139too Fast Ethernet driver 0.9.26 eth0: RealTek RTL8139 at 0xa800, 00:e0:18:dc:6d:bc, IRQ 11 eth0: Identified 8139 chip type 'RTL-8100' ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003075522] Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A eth0: link down PCI: Setting latency timer of device 00:1f.5 to 64 intel8x0: clocking to 48000 usb.c: registered new driver usbdevfs usb.c: registered new driver hub uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Setting latency timer of device 00:1d.0 to 64 uhci.c: USB UHCI at I/O 0xb800, IRQ 5 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 uhci.c: USB UHCI at I/O 0xb400, IRQ 11 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected acpi_power-0363 [37] acpi_power_transition : Error transitioning device [CFAN] to D0 acpi_bus-0496 [36] acpi_bus_set_power : Error transitioning device [CFAN] to D0 acpi_thermal-0549 [35] acpi_thermal_active : Unable to turn cooling device [c12d24a8] 'on' Unable to handle kernel paging request at virtual address 872c31c4 printing eip: c01fd497 *pde = 00000000 Oops: 0000 uhci usbcore snd-intel8x0 snd-pcm snd-timer snd-ac97-codec snd-page-alloc snd-mpu401-uart snd-rawmidi snd-seq-device snd soundcore serial 8139too mii crc32 ohci1394 ieee1394 ds yenta_socket pcmcia_core asus_acpi CPU: 0 EIP: 0010:[] Not tainted EFLAGS: 00010246 eax: 00000000 ebx: 872c31c4 ecx: cff0fdd8 edx: 00000006 esi: 872c31c4 edi: cff0fe34 ebp: c020c608 esp: cff0fde0 ds: 0018 es: 0018 ss: 0018 Process keventd (pid: 2, stackpage=cff0f000) Stack: 00001001 c01fe17f 872c31c4 cff0fe0c cff0fe34 872c31c4 cff0fe70 c020c686 872c31c4 c020c608 cff0fe34 00010000 c02cd715 c02cd6ca 00000050 cff0fe38 cff0fe38 872c31c4 c0213efe 872c31c4 cff0fe34 00000000 00800000 c02ce900 Call Trace: [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] Code: 80 3b aa 0f 44 c3 5b c3 a1 d4 6b 3d c0 eb f7 8b 44 24 04 c3