[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.0-rc3+ (root@loki) (gcc version 4.6.3 (Gentoo 4.6.3 p1.11, pie-0.5.2) ) #1 SMP Fri Feb 8 13:13:53 CET 2013 [ 0.000000] Command line: root=/dev/sda3 drm.debug=0xe [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bd4a0fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bd4a1000-0x00000000bd4a6fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bd4a7000-0x00000000bd5b6fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bd5b7000-0x00000000bd60efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bd60f000-0x00000000bd6c5fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bd6c6000-0x00000000bd6d0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bd6d1000-0x00000000bd6d3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bd6d4000-0x00000000bd6d7fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bd6d8000-0x00000000bd6dbfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bd6dc000-0x00000000bd6defff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bd6df000-0x00000000bd705fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bd706000-0x00000000bd707fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bd708000-0x00000000bd90efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bd90f000-0x00000000bd99efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bd99f000-0x00000000bd9fefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bd9ff000-0x00000000bd9fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdc00000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013bffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: LENOVO 2776P7F/2776P7F, BIOS 6EET19WW (1.00g) 07/30/2008 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x13c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-DBFFF uncachable [ 0.000000] DC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 13C000000 mask FFC000000 uncachable [ 0.000000] 1 base 0BE000000 mask FFE000000 uncachable [ 0.000000] 2 base 000000000 mask F80000000 write-back [ 0.000000] 3 base 080000000 mask FC0000000 write-back [ 0.000000] 4 base 100000000 mask FC0000000 write-back [ 0.000000] 5 base 0BDE00000 mask FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xbde00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbda00 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f6820-0x000f682f] mapped at [ffff8800000f6820] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xbd9fffff] [ 0.000000] [mem 0x00000000-0xbd9fffff] page 2M [ 0.000000] kernel direct mapping tables up to 0xbd9fffff @ [mem 0x1fffc000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff] [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x13bffffff @ [mem 0xbd6c4000-0xbd6c5fff] [ 0.000000] ACPI: RSDP 00000000000f67e0 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000bd97d212 00094 (v01 LENOVO TP-6E 00001007 LTP 00000000) [ 0.000000] ACPI: FACP 00000000bd97d300 000F4 (v03 LENOVO TP-6E 00001007 LNVO 00000001) [ 0.000000] ACPI: DSDT 00000000bd97d6db 0C45C (v01 LENOVO TP-6E 00001007 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000bd98e000 00040 [ 0.000000] ACPI: SSDT 00000000bd97d4b4 00227 (v01 LENOVO TP-6E 00001007 MSFT 03000000) [ 0.000000] ACPI: ECDT 00000000bd989b37 00052 (v01 LENOVO TP-6E 00001007 LNVO 00000001) [ 0.000000] ACPI: APIC 00000000bd989b89 00078 (v01 LENOVO TP-6E 00001007 LNVO 00000001) [ 0.000000] ACPI: MCFG 00000000bd989c01 0003C (v01 LENOVO TP-6E 00001007 LNVO 00000001) [ 0.000000] ACPI: HPET 00000000bd989c3d 00038 (v01 LENOVO TP-6E 00001007 LNVO 00000001) [ 0.000000] ACPI: SLIC 00000000bd989dc2 00176 (v01 LENOVO TP-6E 00001007 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000bd989f38 00028 (v01 LENOVO TP-6E 00001007 LTP 00000001) [ 0.000000] ACPI: ASF! 00000000bd989f60 000A0 (v16 LENOVO TP-6E 00001007 PTL 00000001) [ 0.000000] ACPI: SSDT 00000000bd98d213 0054F (v01 LENOVO TP-6E 00001007 INTL 20050513) [ 0.000000] ACPI: DMAR 00000000bd706000 00120 (v01 ? 00000001 00000000) [ 0.000000] ACPI: SSDT 00000000bd6d3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bd6d2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bd6d1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013bffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13bffffff] [ 0.000000] NODE_DATA [mem 0x13bffc000-0x13bffffff] [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff880137600000-ffff88013b5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x13bffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xbd4a0fff] [ 0.000000] node 0: [mem 0xbd4a7000-0xbd5b6fff] [ 0.000000] node 0: [mem 0xbd60f000-0xbd6c5fff] [ 0.000000] node 0: [mem 0xbd9ff000-0xbd9fffff] [ 0.000000] node 0: [mem 0x100000000-0x13bffffff] [ 0.000000] On node 0 totalpages: 1021431 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3912 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12058 pages used for memmap [ 0.000000] DMA32 zone: 759631 pages, LIFO batch:31 [ 0.000000] Normal zone: 3840 pages used for memmap [ 0.000000] Normal zone: 241920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bd4a1000 - 00000000bd4a7000 [ 0.000000] PM: Registered nosave memory: 00000000bd5b7000 - 00000000bd60f000 [ 0.000000] PM: Registered nosave memory: 00000000bd6c6000 - 00000000bd6d1000 [ 0.000000] PM: Registered nosave memory: 00000000bd6d1000 - 00000000bd6d4000 [ 0.000000] PM: Registered nosave memory: 00000000bd6d4000 - 00000000bd6d8000 [ 0.000000] PM: Registered nosave memory: 00000000bd6d8000 - 00000000bd6dc000 [ 0.000000] PM: Registered nosave memory: 00000000bd6dc000 - 00000000bd6df000 [ 0.000000] PM: Registered nosave memory: 00000000bd6df000 - 00000000bd706000 [ 0.000000] PM: Registered nosave memory: 00000000bd706000 - 00000000bd708000 [ 0.000000] PM: Registered nosave memory: 00000000bd708000 - 00000000bd90f000 [ 0.000000] PM: Registered nosave memory: 00000000bd90f000 - 00000000bd99f000 [ 0.000000] PM: Registered nosave memory: 00000000bd99f000 - 00000000bd9ff000 [ 0.000000] PM: Registered nosave memory: 00000000bda00000 - 00000000bdc00000 [ 0.000000] PM: Registered nosave memory: 00000000bdc00000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000 [ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000 [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013bc00000 s78464 r8192 d23936 u524288 [ 0.000000] pcpu-alloc: s78464 r8192 d23936 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1005463 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda3 drm.debug=0xe [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3938892k/5177344k available (7230k kernel code, 1091620k absent, 146832k reserved, 5829k data, 636k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1396.506 MHz processor [ 0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2793.01 BogoMIPS (lpj=1396506) [ 0.001254] pid_max: default: 32768 minimum: 301 [ 0.002035] Security Framework initialized [ 0.002163] SELinux: Initializing. [ 0.002294] SELinux: Starting in permissive mode [ 0.002885] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.005642] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.006966] Mount-cache hash table entries: 256 [ 0.007373] Initializing cgroup subsys cpuacct [ 0.007501] Initializing cgroup subsys devices [ 0.007624] Initializing cgroup subsys freezer [ 0.007748] Initializing cgroup subsys blkio [ 0.008021] Disabled fast string operations [ 0.008152] CPU: Physical Processor ID: 0 [ 0.008276] CPU: Processor Core ID: 0 [ 0.008400] mce: CPU supports 6 MCE banks [ 0.008532] CPU0: Thermal monitoring enabled (TM2) [ 0.008658] process: using mwait in idle threads [ 0.008788] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.008788] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 [ 0.008788] tlb_flushall_shift: -1 [ 0.009148] Freeing SMP alternatives: 20k freed [ 0.009296] ACPI: Core revision 20121018 [ 0.029558] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.040804] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU U9400 @ 1.40GHz (fam: 06, model: 17, stepping: 06) [ 0.042000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.042000] ... version: 2 [ 0.042000] ... bit width: 40 [ 0.042000] ... generic registers: 2 [ 0.042000] ... value mask: 000000ffffffffff [ 0.042000] ... max period: 000000007fffffff [ 0.042000] ... fixed-purpose events: 3 [ 0.042002] ... event mask: 0000000700000003 [ 0.002000] Disabled fast string operations [ 0.042651] smpboot: Booting Node 0, Processors #1 [ 0.054023] Brought up 2 CPUs [ 0.055004] smpboot: Total of 2 processors activated (5586.02 BogoMIPS) [ 0.057085] devtmpfs: initialized [ 0.057473] PM: Registering ACPI NVS region [mem 0xbd6c6000-0xbd6d0fff] (45056 bytes) [ 0.058011] PM: Registering ACPI NVS region [mem 0xbd6d8000-0xbd6dbfff] (16384 bytes) [ 0.058203] PM: Registering ACPI NVS region [mem 0xbd6df000-0xbd705fff] (159744 bytes) [ 0.058403] PM: Registering ACPI NVS region [mem 0xbd90f000-0xbd99efff] (589824 bytes) [ 0.058814] kworker/u:0 (20) used greatest stack depth: 5816 bytes left [ 0.059006] RTC time: 12:31:45, date: 02/08/13 [ 0.059086] NET: Registered protocol family 16 [ 0.060055] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.060248] ACPI: bus type pci registered [ 0.060385] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.060385] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 [ 0.069978] PCI: Using configuration type 1 for base access [ 0.089074] bio: create slab at 0 [ 0.090029] ACPI: Added _OSI(Module Device) [ 0.090029] ACPI: Added _OSI(Processor Device) [ 0.090029] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.090029] ACPI: Added _OSI(Processor Aggregator Device) [ 0.093197] ACPI: EC: EC description table is found, configuring boot EC [ 0.110137] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.124398] ACPI: SSDT 00000000bd6d6c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.125581] ACPI: Dynamic OEM Table Load: [ 0.125777] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.126899] ACPI: SSDT 00000000bd6d4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.128259] ACPI: Dynamic OEM Table Load: [ 0.128453] ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.135125] ACPI: SSDT 00000000bd6d5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.136391] ACPI: Dynamic OEM Table Load: [ 0.136586] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.139364] ACPI: SSDT 00000000bd6d5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.140539] ACPI: Dynamic OEM Table Load: [ 0.140734] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.146198] ACPI: Interpreter enabled [ 0.146319] ACPI: (supports S0 S3 S4 S5) [ 0.146629] ACPI: Using IOAPIC for interrupt routing [ 0.160074] ACPI: Power Resource [PUBS] (on) [ 0.169329] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.170454] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.170454] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.170658] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.170780] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.173008] pci_root PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.173555] pci_root PNP0A08:00: ACPI _OSC control (0x1d) granted [ 0.173755] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.174026] PCI host bridge to bus 0000:00 [ 0.174146] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.174266] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.174387] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.174509] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.174631] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.174752] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.174874] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff] [ 0.175023] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 [ 0.175091] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000 [ 0.175110] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.175123] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.175133] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] [ 0.175187] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000 [ 0.175204] pci 0000:00:02.1: reg 10: [mem 0xf0400000-0xf04fffff 64bit] [ 0.175277] pci 0000:00:03.0: [8086:2a44] type 00 class 0x078000 [ 0.175300] pci 0000:00:03.0: reg 10: [mem 0xf0826800-0xf082680f 64bit] [ 0.175371] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.175445] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000 [ 0.175473] pci 0000:00:19.0: reg 10: [mem 0xf0600000-0xf061ffff] [ 0.175487] pci 0000:00:19.0: reg 14: [mem 0xf0625000-0xf0625fff] [ 0.175501] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f] [ 0.175597] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.175631] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.175695] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f] [ 0.175775] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.175838] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f] [ 0.175926] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.176033] pci 0000:00:1a.2: reg 20: [io 0x18a0-0x18bf] [ 0.176128] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.176159] pci 0000:00:1a.7: reg 10: [mem 0xf0826c00-0xf0826fff] [ 0.176290] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.176333] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.176357] pci 0000:00:1b.0: reg 10: [mem 0xf0620000-0xf0623fff 64bit] [ 0.176461] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.176498] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.176606] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.176645] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 [ 0.176750] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.176798] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.176862] pci 0000:00:1d.0: reg 20: [io 0x18c0-0x18df] [ 0.176942] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.177010] pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff] [ 0.177090] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.177154] pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f] [ 0.177251] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.177283] pci 0000:00:1d.7: reg 10: [mem 0xf0827000-0xf08273ff] [ 0.177414] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.177449] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.177547] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100 [ 0.177716] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 [ 0.177746] pci 0000:00:1f.2: reg 10: [io 0x1c48-0x1c4f] [ 0.177760] pci 0000:00:1f.2: reg 14: [io 0x183c-0x183f] [ 0.177773] pci 0000:00:1f.2: reg 18: [io 0x1c40-0x1c47] [ 0.177786] pci 0000:00:1f.2: reg 1c: [io 0x1838-0x183b] [ 0.177800] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f] [ 0.177813] pci 0000:00:1f.2: reg 24: [mem 0xf0826000-0xf08267ff] [ 0.177885] pci 0000:00:1f.2: PME# supported from D3hot [ 0.177917] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.177941] pci 0000:00:1f.3: reg 10: [mem 0xf0827400-0xf08274ff 64bit] [ 0.177973] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f] [ 0.178080] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.178349] pci 0000:03:00.0: [8086:4237] type 00 class 0x028000 [ 0.178410] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf0501fff 64bit] [ 0.178627] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.178750] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.178874] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff] [ 0.178976] pci 0000:00:1e.0: PCI bridge to [bus 15] (subtractive decode) [ 0.180016] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.180021] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.180025] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.180030] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.180034] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.180039] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) [ 0.180117] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.180215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.180319] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.195084] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.196003] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.196564] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.198247] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.198247] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.198857] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.199596] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.200356] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.202045] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.202226] vgaarb: loaded [ 0.202339] vgaarb: bridge control possible 0000:00:02.0 [ 0.202580] SCSI subsystem initialized [ 0.202580] ACPI: bus type scsi registered [ 0.203043] libata version 3.00 loaded. [ 0.203050] ACPI: bus type usb registered [ 0.203165] usbcore: registered new interface driver usbfs [ 0.203184] usbcore: registered new interface driver hub [ 0.204024] usbcore: registered new device driver usb [ 0.204162] Advanced Linux Sound Architecture Driver Initialized. [ 0.204164] PCI: Using ACPI for IRQ routing [ 0.207297] PCI: pci_cache_line_size set to 64 bytes [ 0.207397] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.207401] e820: reserve RAM buffer [mem 0xbd4a1000-0xbfffffff] [ 0.207405] e820: reserve RAM buffer [mem 0xbd5b7000-0xbfffffff] [ 0.207410] e820: reserve RAM buffer [mem 0xbd6c6000-0xbfffffff] [ 0.207415] e820: reserve RAM buffer [mem 0xbda00000-0xbfffffff] [ 0.207450] Bluetooth: Core ver 2.16 [ 0.207450] NET: Registered protocol family 31 [ 0.208006] Bluetooth: HCI device and connection manager initialized [ 0.208130] Bluetooth: HCI socket layer initialized [ 0.208249] Bluetooth: L2CAP socket layer initialized [ 0.208374] Bluetooth: SCO socket layer initialized [ 0.208512] cfg80211: Calling CRDA to update world regulatory domain [ 0.208512] NetLabel: Initializing [ 0.209021] NetLabel: domain hash size = 128 [ 0.209137] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.209274] NetLabel: unlabeled traffic allowed by default [ 0.209425] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.209425] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.209425] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.212025] Switching to clocksource hpet [ 0.220993] pnp: PnP ACPI init [ 0.221150] ACPI: bus type pnp registered [ 0.242694] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.242819] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.242942] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.243083] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.243206] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.243328] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved [ 0.243451] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved [ 0.243574] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.243697] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.243819] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.243942] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.244088] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.244211] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.244334] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.244457] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.244582] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.264431] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.264554] system 00:01: [io 0x1000-0x107f] has been reserved [ 0.264675] system 00:01: [io 0x1180-0x11ff] has been reserved [ 0.264797] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.264918] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.265058] system 00:01: [io 0x1600-0x1641] has been reserved [ 0.265184] system 00:01: [io 0x1600-0x161b] has been reserved [ 0.265306] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.265428] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.265551] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.265673] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.265795] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.265917] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.266063] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.266267] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.266297] pnp 00:03: [dma 4] [ 0.266393] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.266512] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.266646] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.266766] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.266886] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.267021] pnp 00:08: Plug and Play ACPI device, IDs LEN0006 PNP0f13 (active) [ 0.286771] pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active) [ 0.287565] pnp: PnP ACPI: found 10 devices [ 0.287683] ACPI: ACPI bus type pnp unregistered [ 0.300625] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.300638] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.300644] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 [ 0.300658] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.300664] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 0.300689] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.300694] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.300699] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.300704] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.300709] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.300718] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff] [ 0.300844] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.301054] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.301249] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.301372] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff] [ 0.301494] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.301615] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.301739] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff] [ 0.301864] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.302075] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.302195] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.302319] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff] [ 0.302443] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.302641] pci 0000:00:1e.0: PCI bridge to [bus 15] [ 0.302809] pci 0000:00:1e.0: setting latency timer to 64 [ 0.302815] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.302820] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.302824] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.302828] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.302832] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.302837] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff] [ 0.302841] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.302845] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff] [ 0.302850] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.302854] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.302858] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.302863] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.302867] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7] [ 0.302871] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff] [ 0.302876] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff] [ 0.302880] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.302884] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.302888] pci_bus 0000:15: resource 9 [mem 0xc0000000-0xfebfffff] [ 0.302941] NET: Registered protocol family 2 [ 0.303382] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.303824] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.304190] TCP: Hash tables configured (established 32768 bind 32768) [ 0.304373] TCP: reno registered [ 0.304500] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.304661] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.304909] NET: Registered protocol family 1 [ 0.305165] RPC: Registered named UNIX socket transport module. [ 0.307288] RPC: Registered udp transport module. [ 0.307405] RPC: Registered tcp transport module. [ 0.307522] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.307651] pci 0000:00:02.0: Boot video device [ 0.307677] pci 0000:00:1a.0: power state changed by ACPI to D0 [ 0.307806] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.307810] pci 0000:00:1a.0: Performing full reset [ 0.307840] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.307843] pci 0000:00:1a.1: Performing full reset [ 0.307869] pci 0000:00:1a.2: power state changed by ACPI to D0 [ 0.308014] pci 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.308018] pci 0000:00:1a.2: Performing full reset [ 0.308104] pci 0000:00:1d.0: power state changed by ACPI to D0 [ 0.308238] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.308241] pci 0000:00:1d.0: Performing full reset [ 0.308276] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.308280] pci 0000:00:1d.1: Performing full reset [ 0.308314] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.308317] pci 0000:00:1d.2: Performing full reset [ 0.308391] PCI: CLS 64 bytes, default 64 [ 0.308456] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.308579] software IO TLB [mem 0xb94a1000-0xbd4a1000] (64MB) mapped at [ffff8800b94a1000-ffff8800bd4a0fff] [ 0.308835] Simple Boot Flag at 0x35 set to 0x1 [ 0.309828] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c [ 0.309961] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c [ 0.310192] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.311228] sha1_ssse3: Using SSSE3 optimized SHA-1 implementation [ 0.311899] audit: initializing netlink socket (disabled) [ 0.312057] type=2000 audit(1360326705.311:1): initialized [ 0.370062] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.376425] VFS: Disk quotas dquot_6.5.2 [ 0.376670] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.378923] NFS: Registering the id_resolver key type [ 0.379115] Key type id_resolver registered [ 0.379232] Key type id_legacy registered [ 0.379626] NTFS driver 2.1.30 [Flags: R/W]. [ 0.380189] fuse init (API version 7.20) [ 0.380696] msgmni has been set to 7693 [ 0.380967] SELinux: Registering netfilter hooks [ 0.382347] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.382539] io scheduler noop registered [ 0.382655] io scheduler deadline registered [ 0.382779] io scheduler cfq registered (default) [ 0.383131] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.383485] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.384085] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.384212] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.384245] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 0.384367] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.384491] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 0.384627] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.385057] intel_idle: does not run on family 6 model 23 [ 0.385335] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.385783] ACPI: AC Adapter [AC] (on-line) [ 0.386205] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.386619] ACPI: Lid Switch [LID] [ 0.386858] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.387073] ACPI: Sleep Button [SLPB] [ 0.387327] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.387521] ACPI: Power Button [PWRF] [ 0.388245] ACPI: Requesting acpi_cpufreq [ 0.394602] Monitor-Mwait will be used to enter C-1 state [ 0.394612] Monitor-Mwait will be used to enter C-2 state [ 0.394619] Monitor-Mwait will be used to enter C-3 state [ 0.394624] tsc: Marking TSC unstable due to TSC halts in idle [ 0.394753] ACPI: acpi_idle registered with cpuidle [ 0.485894] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.486026] ACPI: Thermal Zone [THM0] (55 C) [ 0.488897] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.489029] ACPI: Thermal Zone [THM1] (51 C) [ 0.489883] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.492323] Non-volatile memory driver v1.3 [ 0.492569] Linux agpgart interface v0.103 [ 0.492966] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 0.493320] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.495219] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 0.495803] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.496230] [drm] Initialized drm 1.1.0 20060810 [ 0.497255] [drm:i915_dump_device_info], i915 device info: gen=4, pciid=0x2a42 flags=is_mobile,need_gfx_hws,is_g4x,has_fbc,has_pipe_cxsr,has_hotplug,supports_tv,has_bsd_ring, [ 0.497292] [drm] Memory usable by graphics device = 2048M [ 0.497458] [drm:i915_gem_gtt_init], GMADR size = 256M [ 0.497461] [drm:i915_gem_gtt_init], GTT stolen size = 32M [ 0.497470] i915 0000:00:02.0: setting latency timer to 64 [ 0.505250] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.505455] ACPI: Battery Slot [BAT0] (battery present) [ 0.552742] [drm:intel_opregion_setup], graphic opregion physical addr: 0xbd98b203 [ 0.552773] [drm:intel_opregion_setup], Public ACPI methods supported [ 0.552776] [drm:intel_opregion_setup], SWSCI supported [ 0.552779] [drm:intel_opregion_setup], ASLE supported [ 0.552827] i915 0000:00:02.0: irq 42 for MSI/MSI-X [ 0.552841] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.552962] [drm] Driver supports precise vblank timestamp query. [ 0.553100] [drm:init_vbt_defaults], Set default to SSC at 100MHz [ 0.553104] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT CANTIGA d [ 0.553108] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 100 display_clock_mode 0 [ 0.553113] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 0.553118] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 0.553121] [drm:drm_mode_debug_printmodeline], Modeline 0:"1440x900" 0 102000 1440 1488 1520 1836 900 903 909 926 0x8 0xa [ 0.553127] [drm:parse_lfp_panel_data], VBT initial LVDS value 4230033c [ 0.553132] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 0.553135] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 0.553140] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 0.553153] [drm:intel_dsm_pci_probe], no _DSM method for intel device [ 0.553199] [drm:intel_modeset_init], 2 display pipes available. [ 0.553208] [drm:intel_modeset_init], plane 0 init failed: -19 [ 0.553215] [drm:intel_modeset_init], plane 1 init failed: -19 [ 0.553218] [drm:intel_pch_pll_init], No PCH PLLs on this hardware, skipping initialisation [ 0.553225] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.554160] [drm:i965_irq_handler], pipe B underrun [ 0.566294] [drm:intel_lvds_init], using preferred mode from EDID: [ 0.566297] [drm:drm_mode_debug_printmodeline], Modeline 8:"1440x900" 0 102000 1440 1488 1520 1836 900 903 909 926 0x48 0xa [ 0.566424] [drm:intel_lvds_init], detected dual-link lvds configuration [ 0.566580] [drm:intel_panel_get_backlight], get backlight PWM = 2414340 [ 0.566670] [drm:intel_panel_get_backlight], get backlight PWM = 2414340 [ 0.566816] [drm:intel_setup_outputs], probing SDVOB [ 0.566821] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 0.567180] [drm:intel_sdvo_read_byte], i2c transfer returned -6 [ 0.567184] [drm:intel_sdvo_init], No SDVO device found on SDVOB [ 0.567270] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 0.567274] [drm:intel_setup_outputs], probing HDMI on SDVOB [ 0.567433] [drm:intel_setup_outputs], probing DP_B [ 0.567580] [drm:intel_dp_i2c_init], i2c_init DPDDC-B [ 0.569947] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 0.569955] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 0.572312] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 0.572319] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 0.572402] [drm:intel_setup_outputs], probing SDVOC [ 0.572407] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 0.572760] [drm:intel_sdvo_read_byte], i2c transfer returned -6 [ 0.572764] [drm:intel_sdvo_init], No SDVO device found on SDVOC [ 0.572846] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 0.572852] [drm:intel_setup_outputs], probing DP_D [ 0.572998] [drm:intel_dp_i2c_init], i2c_init DPDDC-D [ 0.575366] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 0.575373] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 0.577730] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 0.577737] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 0.577837] [drm:intel_tv_init], Integrated TV is not present. [ 0.577844] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7ffff000] [ 0.581407] [drm:init_status_page], render ring hws offset: 0x00001000 [ 0.581641] [drm:init_status_page], bsd ring hws offset: 0x00024000 [ 0.581865] [drm:intel_modeset_setup_hw_state], [CRTC:3] hw state readout: disabled [ 0.581870] [drm:intel_modeset_setup_hw_state], [CRTC:4] hw state readout: enabled [ 0.581874] [drm:intel_modeset_setup_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe=1 [ 0.581878] [drm:intel_modeset_setup_hw_state], [ENCODER:13:DAC-13] hw state readout: disabled, pipe=0 [ 0.581883] [drm:intel_modeset_setup_hw_state], [ENCODER:14:TMDS-14] hw state readout: disabled, pipe=0 [ 0.581887] [drm:intel_modeset_setup_hw_state], [ENCODER:18:TMDS-18] hw state readout: disabled, pipe=0 [ 0.581891] [drm:intel_modeset_setup_hw_state], [ENCODER:20:TMDS-20] hw state readout: disabled, pipe=0 [ 0.581896] [drm:intel_modeset_setup_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled [ 0.581900] [drm:intel_modeset_setup_hw_state], [CONNECTOR:12:VGA-1] hw state readout: disabled [ 0.581904] [drm:intel_modeset_setup_hw_state], [CONNECTOR:15:HDMI-A-1] hw state readout: disabled [ 0.581908] [drm:intel_modeset_setup_hw_state], [CONNECTOR:19:DP-1] hw state readout: disabled [ 0.581912] [drm:intel_modeset_setup_hw_state], [CONNECTOR:21:DP-2] hw state readout: disabled [ 0.581918] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1] [ 0.581923] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6] [ 0.581927] [drm:intel_modeset_check_state], [ENCODER:13:DAC-13] [ 0.581930] [drm:intel_modeset_check_state], [ENCODER:14:TMDS-14] [ 0.581934] [drm:intel_modeset_check_state], [ENCODER:18:TMDS-18] [ 0.581937] [drm:intel_modeset_check_state], [ENCODER:20:TMDS-20] [ 0.581941] [drm:intel_modeset_check_state], [CRTC:3] [ 0.581944] [drm:intel_modeset_check_state], [CRTC:4] [ 0.581956] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 0.581970] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 0.581974] [drm:drm_mode_debug_printmodeline], Modeline 22:"1440x900" 60 102000 1440 1488 1520 1836 900 903 909 926 0x48 0xa [ 0.581980] [drm:drm_mode_debug_printmodeline], Modeline 23:"1440x900" 50 85000 1440 1488 1520 1836 900 903 909 926 0x40 0xa [ 0.581986] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 0.589019] [drm:intel_crt_detect], CRT not detected via hotplug [ 0.589173] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 0.589178] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 0.589181] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 0.589184] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 0.589448] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 0.589451] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 0.589455] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 0.589458] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [ 0.589462] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 0.614602] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 0.614614] [drm:drm_mode_debug_printmodeline], Modeline 42:"1920x1080" 0 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6 [ 0.614620] [drm:drm_mode_prune_invalid], Not using 1920x1080 mode 15 [ 0.614626] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] probed modes : [ 0.614630] [drm:drm_mode_debug_printmodeline], Modeline 9:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 0.614635] [drm:drm_mode_debug_printmodeline], Modeline 24:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 0.614640] [drm:drm_mode_debug_printmodeline], Modeline 37:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 0.614646] [drm:drm_mode_debug_printmodeline], Modeline 41:"1680x945" 60 131481 1680 1784 1960 2240 945 946 949 978 0x0 0x6 [ 0.614651] [drm:drm_mode_debug_printmodeline], Modeline 35:"1400x1050" 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x40 0x9 [ 0.614656] [drm:drm_mode_debug_printmodeline], Modeline 40:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6 [ 0.614662] [drm:drm_mode_debug_printmodeline], Modeline 25:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 0.614667] [drm:drm_mode_debug_printmodeline], Modeline 36:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 0.614672] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 0.614678] [drm:drm_mode_debug_printmodeline], Modeline 39:"1366x768" 60 85885 1366 1439 1583 1800 768 769 772 795 0x0 0x6 [ 0.614683] [drm:drm_mode_debug_printmodeline], Modeline 34:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5 [ 0.614688] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 [ 0.614694] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x768" 60 68250 1280 1328 1360 1440 768 771 778 790 0x40 0x9 [ 0.614699] [drm:drm_mode_debug_printmodeline], Modeline 30:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 0.614704] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x576" 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6 [ 0.614710] [drm:drm_mode_debug_printmodeline], Modeline 27:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 0.614715] [drm:drm_mode_debug_printmodeline], Modeline 28:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 0.614720] [drm:drm_mode_debug_printmodeline], Modeline 31:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 0.614725] [drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 0.614731] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] [ 0.614735] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected [ 0.614738] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 0.617137] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 0.621411] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 0.625410] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 0.627016] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 0.627020] [drm:drm_setup_crtcs], [ 0.627023] [drm:drm_enable_connectors], connector 5 enabled? yes [ 0.627026] [drm:drm_enable_connectors], connector 12 enabled? no [ 0.627029] [drm:drm_enable_connectors], connector 15 enabled? yes [ 0.627032] [drm:drm_enable_connectors], connector 19 enabled? no [ 0.627036] [drm:drm_enable_connectors], connector 21 enabled? no [ 0.627039] [drm:drm_target_preferred], looking for cmdline mode on connector 5 [ 0.627042] [drm:drm_target_preferred], looking for preferred mode on connector 5 [ 0.627045] [drm:drm_target_preferred], found mode 1440x900 [ 0.627048] [drm:drm_target_preferred], looking for cmdline mode on connector 15 [ 0.627051] [drm:drm_target_preferred], looking for preferred mode on connector 15 [ 0.627054] [drm:drm_target_preferred], found mode 1920x1200 [ 0.627057] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 0.627063] [drm:drm_setup_crtcs], desired mode 1440x900 set on crtc 3 [ 0.627068] [drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 4 [ 0.642114] [drm:intelfb_create], allocated 1920x1200 fb: 0x00046000, bo ffff8801360d8600 [ 0.642321] fbcon: inteldrmfb (fb0) is primary device [ 0.644075] [drm:intel_crtc_set_config], [CRTC:3] [FB:44] #connectors=1 (x y) (0 0) [ 0.644080] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set [ 0.644082] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 0.644086] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 0.644090] [drm:drm_mode_debug_printmodeline], Modeline 42:"1440x900" 60 102000 1440 1488 1520 1836 900 903 909 926 0x48 0xa [ 0.644094] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 0.644096] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch [ 0.644098] [drm:intel_crtc_set_config], attempting to set mode from userspace [ 0.644102] [drm:drm_mode_debug_printmodeline], Modeline 42:"1440x900" 60 102000 1440 1488 1520 1836 900 903 909 926 0x48 0xa [ 0.644106] [drm:intel_set_mode], set mode pipe masks: modeset: 1, prepare: 1, disable: 2 [ 0.644109] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 0.644113] [drm:intel_panel_get_max_backlight], max backlight PWM = 2414340 [ 0.644127] [drm:intel_opregion_asle_intr], non asle set request?? [ 0.928018] [drm:intel_update_fbc], no output, disabling [ 0.928024] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 0.928031] [drm:intel_modeset_adjusted_mode], [CRTC:3] [ 0.928036] [drm:i9xx_get_refclk], using SSC reference clock of 100 MHz [ 0.928369] [drm:i9xx_crtc_mode_set], Mode for pipe A: [ 0.928373] [drm:drm_mode_debug_printmodeline], Modeline 42:"1440x900" 60 102000 1440 1488 1520 1836 900 903 909 926 0x48 0xa [ 0.928375] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking [ 0.946019] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 7680 [ 0.946022] [drm:intel_update_fbc], no output, disabling [ 0.946026] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 0.946030] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:42:1440x900] [ 0.946033] [drm:g4x_check_srwm], SR watermark: display plane 79, cursor 6 [ 0.946036] [drm:g4x_check_srwm], display watermark is too large(79/63), disabling [ 0.946039] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=34, cursor=6, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 0.962042] [drm:intel_update_fbc], fbc set to per-chip default [ 0.962044] [drm:intel_update_fbc], fbc disabled per module param [ 0.962047] [drm:intel_enable_lvds], applying panel-fitter: 0, 0 [ 1.218016] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2414340 [ 1.218019] [drm:intel_panel_get_max_backlight], max backlight PWM = 2414340 [ 1.218026] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1] [ 1.218029] [drm:intel_opregion_asle_intr], non asle set request?? [ 1.218031] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6] [ 1.218034] [drm:intel_modeset_check_state], [ENCODER:13:DAC-13] [ 1.218037] [drm:intel_modeset_check_state], [ENCODER:14:TMDS-14] [ 1.218039] [drm:intel_modeset_check_state], [ENCODER:18:TMDS-18] [ 1.218042] [drm:intel_modeset_check_state], [ENCODER:20:TMDS-20] [ 1.218044] [drm:intel_modeset_check_state], [CRTC:3] [ 1.218046] [drm:intel_modeset_check_state], [CRTC:4] [ 1.218050] [drm:intel_crtc_set_config], [CRTC:4] [FB:44] #connectors=1 (x y) (0 0) [ 1.218053] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set [ 1.218055] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 1.218059] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.218063] [drm:drm_mode_debug_printmodeline], Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 1.218065] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch [ 1.218068] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 1.218071] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 1.218073] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch [ 1.218075] [drm:intel_crtc_set_config], attempting to set mode from userspace [ 1.218079] [drm:drm_mode_debug_printmodeline], Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 1.218082] [drm:intel_set_mode], set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 1.218087] [drm:intel_modeset_adjusted_mode], [CRTC:4] [ 1.218437] [drm:i9xx_crtc_mode_set], Mode for pipe B: [ 1.218441] [drm:drm_mode_debug_printmodeline], Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 1.218443] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking [ 1.236018] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 7680 [ 1.236021] [drm:intel_update_fbc], fbc set to per-chip default [ 1.236023] [drm:intel_update_fbc], fbc disabled per module param [ 1.236026] [drm:g4x_check_srwm], SR watermark: display plane 79, cursor 6 [ 1.236028] [drm:g4x_check_srwm], display watermark is too large(79/63), disabling [ 1.236032] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=34, cursor=6, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 1.236036] [drm:intel_crtc_mode_set], [ENCODER:14:TMDS-14] set [MODE:43:1920x1200] [ 1.236041] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=34, cursor=6, B: plane=51, cursor=6, SR: plane=0, cursor=0 [ 1.252043] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 1.252049] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1] [ 1.252052] [drm:intel_connector_check_state], [CONNECTOR:15:HDMI-A-1] [ 1.252055] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6] [ 1.252057] [drm:intel_modeset_check_state], [ENCODER:13:DAC-13] [ 1.252060] [drm:intel_modeset_check_state], [ENCODER:14:TMDS-14] [ 1.252063] [drm:intel_modeset_check_state], [ENCODER:18:TMDS-18] [ 1.252065] [drm:intel_modeset_check_state], [ENCODER:20:TMDS-20] [ 1.252067] [drm:intel_modeset_check_state], [CRTC:3] [ 1.252069] [drm:intel_modeset_check_state], [CRTC:4] [ 1.252102] [drm:intel_crtc_set_config], [CRTC:3] [FB:44] #connectors=1 (x y) (0 0) [ 1.252106] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 1.252108] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 1.252112] [drm:intel_crtc_set_config], [CRTC:4] [FB:44] #connectors=1 (x y) (0 0) [ 1.252115] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 1.252118] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 1.259163] [drm:intel_crtc_set_config], [CRTC:3] [FB:44] #connectors=1 (x y) (0 0) [ 1.259167] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 1.259170] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 1.259173] [drm:intel_crtc_set_config], [CRTC:4] [FB:44] #connectors=1 (x y) (0 0) [ 1.259177] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 1.259179] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 1.266199] Console: switching to colour frame buffer device 180x56 [ 1.266205] [drm:intel_crtc_set_config], [CRTC:3] [FB:44] #connectors=1 (x y) (0 0) [ 1.266208] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 1.266211] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 1.266214] [drm:intel_crtc_set_config], [CRTC:4] [FB:44] #connectors=1 (x y) (0 0) [ 1.266218] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 1.266221] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 1.272877] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.272933] i915 0000:00:02.0: registered panic notifier [ 1.275220] [drm:intel_opregion_asle_intr], non asle set request?? [ 1.275717] [drm:asle_set_backlight], bclp = 0x800000ff [ 1.275722] [drm:intel_panel_get_max_backlight], max backlight PWM = 2414340 [ 1.275725] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2414340 [ 1.275729] [drm:intel_panel_get_max_backlight], max backlight PWM = 2414340 [ 1.275735] [drm:intel_opregion_asle_intr], non asle set request?? [ 1.277383] [drm:intel_opregion_asle_intr], non asle set request?? [ 1.277861] [drm:asle_set_backlight], bclp = 0x800000ff [ 1.277866] [drm:intel_panel_get_max_backlight], max backlight PWM = 2414340 [ 1.277869] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2414340 [ 1.277873] [drm:intel_panel_get_max_backlight], max backlight PWM = 2414340 [ 1.277880] [drm:intel_opregion_asle_intr], non asle set request?? [ 1.278867] acpi device:01: registered as cooling_device2 [ 1.279134] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 1.279324] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 1.279523] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.283687] brd: module loaded [ 1.285863] loop: module loaded [ 1.286042] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20121018/utaddress-251) [ 1.286169] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.286261] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20121018/utaddress-251) [ 1.286383] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.286472] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20121018/utaddress-251) [ 1.286593] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.286680] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.287298] ahci 0000:00:1f.2: version 3.0 [ 1.287374] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 1.287422] ahci: SSS flag set, parallel bus scan disabled [ 1.287504] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.287580] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc [ 1.287655] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.289179] scsi0 : ahci [ 1.289438] scsi1 : ahci [ 1.289676] scsi2 : ahci [ 1.289911] scsi3 : ahci [ 1.290130] ata1: SATA max UDMA/133 abar m2048@0xf0826000 port 0xf0826100 irq 43 [ 1.290201] ata2: SATA max UDMA/133 abar m2048@0xf0826000 port 0xf0826180 irq 43 [ 1.290267] ata3: DUMMY [ 1.290292] ata4: DUMMY [ 1.293213] tun: Universal TUN/TAP device driver, 1.6 [ 1.295736] tun: (C) 1999-2004 Max Krasnyansky [ 1.298391] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.300942] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.303592] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k [ 1.306128] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 1.308686] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.308782] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.311418] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 1.500292] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:86:61:ba:c2 [ 1.502888] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.505478] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF [ 1.508123] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 1.510642] Copyright(c) 2003-2012 Intel Corporation [ 1.513295] iwlwifi 0000:03:00.0: irq 45 for MSI/MSI-X [ 1.513552] usbcore: registered new interface driver i2400m_usb [ 1.516125] usbcore: registered new interface driver asix [ 1.518650] usbcore: registered new interface driver cdc_ether [ 1.521132] usbcore: registered new interface driver net1080 [ 1.523592] usbcore: registered new interface driver rndis_host [ 1.526038] usbcore: registered new interface driver cdc_subset [ 1.528405] usbcore: registered new interface driver zaurus [ 1.530765] usbcore: registered new interface driver cdc_ncm [ 1.533261] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.535507] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 1.535514] ehci-pci: EHCI PCI platform driver [ 1.537813] ehci-pci 0000:00:1a.7: setting latency timer to 64 [ 1.537819] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.540224] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.542532] ehci-pci 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 1.542540] ehci-pci 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 1.542576] ehci-pci 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.546472] ehci-pci 0000:00:1a.7: debug port 1 [ 1.548733] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 1.548737] ehci-pci 0000:00:1a.7: supports USB remote wakeup [ 1.548762] ehci-pci 0000:00:1a.7: irq 23, io mem 0xf0826c00 [ 1.551024] ehci-pci 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 1.557016] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.559320] usb usb1: default language 0x0409 [ 1.559331] usb usb1: udev 1, busnum 1, minor = 0 [ 1.559336] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.561604] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.563832] usb usb1: Product: EHCI Host Controller [ 1.566027] usb usb1: Manufacturer: Linux 3.8.0-rc3+ ehci_hcd [ 1.568234] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.570615] usb usb1: usb_probe_device [ 1.570621] usb usb1: configuration #1 chosen from 1 choice [ 1.570634] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.570722] hub 1-0:1.0: usb_probe_interface [ 1.570727] hub 1-0:1.0: usb_probe_interface - got id [ 1.570732] hub 1-0:1.0: USB hub found [ 1.572862] hub 1-0:1.0: 6 ports detected [ 1.574919] hub 1-0:1.0: standalone hub [ 1.574922] hub 1-0:1.0: no power switching (usb 1.0) [ 1.574926] hub 1-0:1.0: individual port over-current protection [ 1.574930] hub 1-0:1.0: power on to power good time: 20ms [ 1.574938] hub 1-0:1.0: local power source is good [ 1.575021] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.575132] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 1.575138] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.577253] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.579227] ehci-pci 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 1.579234] ehci-pci 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 1.579264] ehci-pci 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.583156] ehci-pci 0000:00:1d.7: debug port 1 [ 1.585050] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 1.585055] ehci-pci 0000:00:1d.7: supports USB remote wakeup [ 1.585079] ehci-pci 0000:00:1d.7: irq 19, io mem 0xf0827000 [ 1.586902] ehci-pci 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 1.588372] Monitor-Mwait will be used to enter C-3 state [ 1.593018] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.594852] usb usb2: default language 0x0409 [ 1.594863] usb usb2: udev 1, busnum 2, minor = 128 [ 1.594868] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.596665] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.598429] usb usb2: Product: EHCI Host Controller [ 1.600033] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.601961] usb usb2: Manufacturer: Linux 3.8.0-rc3+ ehci_hcd [ 1.601967] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.601971] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.601975] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.607470] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.607474] ata1.00: ATA-7: SAMSUNG MCCOE64G8MPP-0VA, PS105L16, max UDMA/100 [ 1.607476] ata1.00: 125045424 sectors, multi 16: LBA48 [ 1.613320] usb usb2: usb_probe_device [ 1.613326] usb usb2: configuration #1 chosen from 1 choice [ 1.613338] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 1.613429] hub 2-0:1.0: usb_probe_interface [ 1.613434] hub 2-0:1.0: usb_probe_interface - got id [ 1.613438] hub 2-0:1.0: USB hub found [ 1.614024] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.614028] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.614032] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.619265] hub 2-0:1.0: 6 ports detected [ 1.619290] ata1.00: configured for UDMA/100 [ 1.619441] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MCCOE64G PS10 PQ: 0 ANSI: 5 [ 1.620024] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) [ 1.620106] sd 0:0:0:0: [sda] Write Protect is off [ 1.620110] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.620145] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.620747] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.632800] hub 2-0:1.0: standalone hub [ 1.632804] hub 2-0:1.0: no power switching (usb 1.0) [ 1.632808] hub 2-0:1.0: individual port over-current protection [ 1.632812] hub 2-0:1.0: power on to power good time: 20ms [ 1.632819] hub 2-0:1.0: local power source is good [ 1.632897] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 1.632985] sda: sda1 sda2 sda3 [ 1.633060] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.633062] ohci_hcd: block sizes: ed 80 td 96 [ 1.633138] uhci_hcd: USB Universal Host Controller Interface driver [ 1.633179] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.633183] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.633301] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.633312] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.633318] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.633321] uhci_hcd 0000:00:1a.0: Performing full reset [ 1.633337] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 1.633363] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 1.633417] usb usb3: default language 0x0409 [ 1.633426] usb usb3: udev 1, busnum 3, minor = 256 [ 1.633429] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.633433] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.633435] usb usb3: Product: UHCI Host Controller [ 1.633438] usb usb3: Manufacturer: Linux 3.8.0-rc3+ uhci_hcd [ 1.633440] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.633604] usb usb3: usb_probe_device [ 1.633607] usb usb3: configuration #1 chosen from 1 choice [ 1.633617] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 1.633703] hub 3-0:1.0: usb_probe_interface [ 1.633706] hub 3-0:1.0: usb_probe_interface - got id [ 1.633709] hub 3-0:1.0: USB hub found [ 1.633716] hub 3-0:1.0: 2 ports detected [ 1.633718] hub 3-0:1.0: standalone hub [ 1.633720] hub 3-0:1.0: no power switching (usb 1.0) [ 1.633722] hub 3-0:1.0: individual port over-current protection [ 1.633724] hub 3-0:1.0: power on to power good time: 2ms [ 1.633729] hub 3-0:1.0: local power source is good [ 1.633760] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 1.633827] ehci-pci 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 1.633856] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.633859] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.633973] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.633983] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.633989] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.633991] uhci_hcd 0000:00:1a.1: Performing full reset [ 1.634019] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 1.634042] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 1.634102] usb usb4: default language 0x0409 [ 1.634110] usb usb4: udev 1, busnum 4, minor = 384 [ 1.634114] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.634117] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.634119] usb usb4: Product: UHCI Host Controller [ 1.634122] usb usb4: Manufacturer: Linux 3.8.0-rc3+ uhci_hcd [ 1.634124] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.634290] usb usb4: usb_probe_device [ 1.634293] usb usb4: configuration #1 chosen from 1 choice [ 1.634303] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 1.634386] hub 4-0:1.0: usb_probe_interface [ 1.634389] hub 4-0:1.0: usb_probe_interface - got id [ 1.634392] hub 4-0:1.0: USB hub found [ 1.634398] hub 4-0:1.0: 2 ports detected [ 1.634400] hub 4-0:1.0: standalone hub [ 1.634402] hub 4-0:1.0: no power switching (usb 1.0) [ 1.634404] hub 4-0:1.0: individual port over-current protection [ 1.634407] hub 4-0:1.0: power on to power good time: 2ms [ 1.634411] hub 4-0:1.0: local power source is good [ 1.634442] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 1.634507] ehci-pci 0000:00:1a.7: HS companion for 0000:00:1a.1 [ 1.634532] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.634536] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.634666] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.634677] uhci_hcd 0000:00:1a.2: detected 2 ports [ 1.634682] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.634684] uhci_hcd 0000:00:1a.2: Performing full reset [ 1.634701] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 1.634726] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0 [ 1.634779] usb usb5: default language 0x0409 [ 1.634787] usb usb5: udev 1, busnum 5, minor = 512 [ 1.634791] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.634794] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.634796] usb usb5: Product: UHCI Host Controller [ 1.634799] usb usb5: Manufacturer: Linux 3.8.0-rc3+ uhci_hcd [ 1.634801] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.634965] usb usb5: usb_probe_device [ 1.634969] usb usb5: configuration #1 chosen from 1 choice [ 1.634979] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 1.635073] hub 5-0:1.0: usb_probe_interface [ 1.635076] hub 5-0:1.0: usb_probe_interface - got id [ 1.635079] hub 5-0:1.0: USB hub found [ 1.635085] hub 5-0:1.0: 2 ports detected [ 1.635087] hub 5-0:1.0: standalone hub [ 1.635089] hub 5-0:1.0: no power switching (usb 1.0) [ 1.635091] hub 5-0:1.0: individual port over-current protection [ 1.635093] hub 5-0:1.0: power on to power good time: 2ms [ 1.635098] hub 5-0:1.0: local power source is good [ 1.635129] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 1.635194] ehci-pci 0000:00:1a.7: HS companion for 0000:00:1a.2 [ 1.635223] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.635227] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.635342] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.635353] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.635358] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.635360] uhci_hcd 0000:00:1d.0: Performing full reset [ 1.635377] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 1.635406] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0 [ 1.635460] usb usb6: default language 0x0409 [ 1.635469] usb usb6: udev 1, busnum 6, minor = 640 [ 1.635472] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.635475] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.635478] usb usb6: Product: UHCI Host Controller [ 1.635480] usb usb6: Manufacturer: Linux 3.8.0-rc3+ uhci_hcd [ 1.635482] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.635653] usb usb6: usb_probe_device [ 1.635657] usb usb6: configuration #1 chosen from 1 choice [ 1.635666] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 1.635749] hub 6-0:1.0: usb_probe_interface [ 1.635751] hub 6-0:1.0: usb_probe_interface - got id [ 1.635754] hub 6-0:1.0: USB hub found [ 1.635760] hub 6-0:1.0: 2 ports detected [ 1.635763] hub 6-0:1.0: standalone hub [ 1.635765] hub 6-0:1.0: no power switching (usb 1.0) [ 1.635767] hub 6-0:1.0: individual port over-current protection [ 1.635769] hub 6-0:1.0: power on to power good time: 2ms [ 1.635774] hub 6-0:1.0: local power source is good [ 1.635805] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 1.635871] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 1.635893] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.635897] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.636019] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.636032] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.636038] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.636040] uhci_hcd 0000:00:1d.1: Performing full reset [ 1.636057] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 1.636083] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0 [ 1.636137] usb usb7: default language 0x0409 [ 1.636145] usb usb7: udev 1, busnum 7, minor = 768 [ 1.636148] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.636151] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.636154] usb usb7: Product: UHCI Host Controller [ 1.636156] usb usb7: Manufacturer: Linux 3.8.0-rc3+ uhci_hcd [ 1.636159] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.636325] usb usb7: usb_probe_device [ 1.636328] usb usb7: configuration #1 chosen from 1 choice [ 1.636338] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 1.636419] hub 7-0:1.0: usb_probe_interface [ 1.636422] hub 7-0:1.0: usb_probe_interface - got id [ 1.636425] hub 7-0:1.0: USB hub found [ 1.636431] hub 7-0:1.0: 2 ports detected [ 1.636433] hub 7-0:1.0: standalone hub [ 1.636435] hub 7-0:1.0: no power switching (usb 1.0) [ 1.636437] hub 7-0:1.0: individual port over-current protection [ 1.636440] hub 7-0:1.0: power on to power good time: 2ms [ 1.636444] hub 7-0:1.0: local power source is good [ 1.636474] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 1.636544] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 1.636569] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.636573] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.636690] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.636700] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.636706] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.636708] uhci_hcd 0000:00:1d.2: Performing full reset [ 1.636724] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 1.636746] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00 [ 1.636800] usb usb8: default language 0x0409 [ 1.636809] usb usb8: udev 1, busnum 8, minor = 896 [ 1.636812] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.636815] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.636818] usb usb8: Product: UHCI Host Controller [ 1.636820] usb usb8: Manufacturer: Linux 3.8.0-rc3+ uhci_hcd [ 1.636822] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.636985] usb usb8: usb_probe_device [ 1.636989] usb usb8: configuration #1 chosen from 1 choice [ 1.636998] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 1.637093] hub 8-0:1.0: usb_probe_interface [ 1.637095] hub 8-0:1.0: usb_probe_interface - got id [ 1.637099] hub 8-0:1.0: USB hub found [ 1.637105] hub 8-0:1.0: 2 ports detected [ 1.637107] hub 8-0:1.0: standalone hub [ 1.637109] hub 8-0:1.0: no power switching (usb 1.0) [ 1.637111] hub 8-0:1.0: individual port over-current protection [ 1.637113] hub 8-0:1.0: power on to power good time: 2ms [ 1.637118] hub 8-0:1.0: local power source is good [ 1.637151] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 1.637228] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 1.637309] Initializing USB Mass Storage driver... [ 1.637419] usbcore: registered new interface driver usb-storage [ 1.637420] USB Mass Storage support registered. [ 1.637585] usbcore: registered new interface driver usbserial [ 1.637772] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.645811] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.645819] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.646198] mousedev: PS/2 mouse device common for all mice [ 1.646901] usbcore: registered new interface driver synaptics_usb [ 1.646936] rtc_cmos 00:06: RTC can wake from S4 [ 1.647197] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.647230] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.647357] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt [ 1.648070] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com [ 1.648250] usbcore: registered new interface driver btusb [ 1.648332] cpuidle: using governor ladder [ 1.794752] ehci-pci 0000:00:1a.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.794760] hub 1-0:1.0: port 1: status 0501 change 0001 [ 1.794939] cpuidle: using governor menu [ 1.795576] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.798712] EFI Variables Facility v0.08 2004-May-17 [ 1.800544] ehci-pci 0000:00:1a.7: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.800552] hub 1-0:1.0: port 2: status 0501 change 0001 [ 1.800577] ehci-pci 0000:00:1a.7: GetStatus port:6 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.800617] hub 1-0:1.0: port 6: status 0501 change 0001 [ 1.800639] ehci-pci 0000:00:1d.7: GetStatus port:1 status 001403 0 ACK POWER sig=k CSC CONNECT [ 1.800647] hub 2-0:1.0: port 1: status 0501 change 0001 [ 1.800662] ehci-pci 0000:00:1d.7: GetStatus port:2 status 001403 0 ACK POWER sig=k CSC CONNECT [ 1.800711] hub 2-0:1.0: port 2: status 0501 change 0001 [ 1.800745] uhci_hcd 0000:00:1a.0: port 1 portsc 0082,00 [ 1.800790] uhci_hcd 0000:00:1a.0: port 2 portsc 0082,00 [ 1.800829] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.800838] uhci_hcd 0000:00:1a.2: port 2 portsc 0082,00 [ 1.800850] hub 4-0:1.0: hub_suspend [ 1.800855] uhci_hcd 0000:00:1d.0: port 1 portsc 0082,00 [ 1.800859] usb usb4: bus auto-suspend, wakeup 1 [ 1.800862] usb usb4: suspend_rh [ 1.800875] uhci_hcd 0000:00:1d.0: port 2 portsc 0082,00 [ 1.800904] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.800920] hub 7-0:1.0: hub_suspend [ 1.800926] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.800929] usb usb7: bus auto-suspend, wakeup 1 [ 1.800934] usb usb7: suspend_rh [ 1.800939] hub 8-0:1.0: hub_suspend [ 1.800946] usb usb8: bus auto-suspend, wakeup 1 [ 1.800950] usb usb8: suspend_rh [ 1.802147] usbcore: registered new interface driver usbhid [ 1.804071] usbhid: USB HID core driver [ 1.807273] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.807610] Netfilter messages via NETLINK v0.30. [ 1.807631] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.807859] ctnetlink v0.93: registering with nfnetlink. [ 1.808087] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.808132] TCP: cubic registered [ 1.808133] Initializing XFRM netlink socket [ 1.808551] NET: Registered protocol family 10 [ 1.808924] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.808982] sit: IPv6 over IPv4 tunneling driver [ 1.809375] NET: Registered protocol family 17 [ 1.829178] Bluetooth: RFCOMM TTY layer initialized [ 1.831121] Bluetooth: RFCOMM socket layer initialized [ 1.833011] Bluetooth: RFCOMM ver 1.11 [ 1.834824] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.836622] Bluetooth: BNEP filters: protocol multicast [ 1.838469] Bluetooth: BNEP socket layer initialized [ 1.840344] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.842284] Bluetooth: HIDP socket layer initialized [ 1.844186] Key type dns_resolver registered [ 1.846959] PM: Checking hibernation image partition /dev/sda2 [ 1.846986] PM: Hibernation image partition 8:2 present [ 1.846992] PM: Looking for hibernation image. [ 1.847344] PM: Image not found (code -22) [ 1.847347] PM: Hibernation image not present or could not be loaded. [ 1.847417] registered taskstats version 1 [ 1.850278] Magic number: 1:325:531 [ 1.852366] console [netcon0] enabled [ 1.854317] netconsole: network logging started [ 1.860632] ALSA device list: [ 1.862540] No soundcards found. [ 1.900059] hub 1-0:1.0: state 7 ports 6 chg 0046 evt 0000 [ 1.900076] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 1.951304] ehci-pci 0000:00:1a.7: port 1 reset complete, port enabled [ 1.951321] ehci-pci 0000:00:1a.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.002072] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.056302] ehci-pci 0000:00:1a.7: port 1 reset complete, port enabled [ 2.056317] ehci-pci 0000:00:1a.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.119477] usb 1-1: udev 2, busnum 1, minor = 1 [ 2.119487] usb 1-1: New USB device found, idVendor=04b4, idProduct=6560 [ 2.122980] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.126825] usb 1-1: usb_probe_device [ 2.126836] usb 1-1: configuration #1 chosen from 1 choice [ 2.126984] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 2.127251] hub 1-1:1.0: usb_probe_interface [ 2.127259] hub 1-1:1.0: usb_probe_interface - got id [ 2.127272] hub 1-1:1.0: USB hub found [ 2.130965] hub 1-1:1.0: 4 ports detected [ 2.134443] hub 1-1:1.0: standalone hub [ 2.134450] hub 1-1:1.0: individual port power switching [ 2.134460] hub 1-1:1.0: individual port over-current protection [ 2.134616] hub 1-1:1.0: TT per port [ 2.134629] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 2.134636] hub 1-1:1.0: Port indicators are supported [ 2.134646] hub 1-1:1.0: power on to power good time: 100ms [ 2.134960] hub 1-1:1.0: local power source is good [ 2.135106] hub 1-1:1.0: enabling power on all ports [ 2.135683] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 2.186303] ehci-pci 0000:00:1a.7: port 2 full speed --> companion [ 2.186317] ehci-pci 0000:00:1a.7: GetStatus port:2 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 2.186335] hub 1-0:1.0: port 2 not reset yet, waiting 50ms [ 2.235592] usb 1-1: link qh256-0001/ffff880136bc9380 start 1 [1/0 us] [ 2.237073] ehci-pci 0000:00:1a.7: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 2.237121] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 2.288302] ehci-pci 0000:00:1a.7: port 6 reset complete, port enabled [ 2.288315] ehci-pci 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.339057] usb 1-6: new high-speed USB device number 4 using ehci-pci [ 2.352073] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.360729] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 2.361725] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 2.364179] ata2.00: ATAPI: MATSHITADVD-RAM UJ-844, RC02, max UDMA/33 [ 2.367682] ata2.00: applying bridge limits [ 2.377102] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 2.378087] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 2.380530] ata2.00: configured for UDMA/33 [ 2.393303] ehci-pci 0000:00:1a.7: port 6 reset complete, port enabled [ 2.393317] ehci-pci 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.393787] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-844 RC02 PQ: 0 ANSI: 5 [ 2.402382] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.405961] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.410154] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.410615] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.460979] usb 1-6: skipped 1 descriptor after configuration [ 2.460989] usb 1-6: skipped 4 descriptors after interface [ 2.461025] usb 1-6: skipped 1 descriptor after endpoint [ 2.461038] usb 1-6: skipped 17 descriptors after interface [ 2.461223] usb 1-6: default language 0x0409 [ 2.461727] usb 1-6: udev 4, busnum 1, minor = 3 [ 2.461741] usb 1-6: New USB device found, idVendor=17ef, idProduct=4807 [ 2.465367] usb 1-6: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 2.468962] usb 1-6: Manufacturer: Chicony Electronics Co., Ltd. [ 2.472878] usb 1-6: usb_probe_device [ 2.472887] usb 1-6: configuration #1 chosen from 1 choice [ 2.473083] usb 1-6: adding 1-6:1.0 (config #1, interface 0) [ 2.473699] usb 1-6: adding 1-6:1.1 (config #1, interface 1) [ 2.473990] hub 2-0:1.0: state 7 ports 6 chg 0006 evt 0000 [ 2.474061] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 2.474086] ehci-pci 0000:00:1d.7: port 1 low speed --> companion [ 2.525070] ehci-pci 0000:00:1d.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 2.525122] hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 2.525144] ehci-pci 0000:00:1d.7: port 2 low speed --> companion [ 2.576071] ehci-pci 0000:00:1d.7: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 2.576118] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 2.576138] uhci_hcd 0000:00:1a.0: port 2 portsc 0093,00 [ 2.576157] hub 3-0:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 2.680085] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 2.782063] usb 3-2: new full-speed USB device number 2 using uhci_hcd [ 2.792546] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input5 [ 2.827288] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6 [ 2.843031] md: Waiting for all devices to be available before autodetect [ 2.846713] md: If you don't use raid, use raid=noautodetect [ 2.851151] md: Autodetecting RAID arrays. [ 2.854835] md: Scanned 0 and added 0 devices. [ 2.858500] md: autorun ... [ 2.862065] md: ... autorun DONE. [ 2.866196] EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240) [ 2.868437] EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (240) [ 2.874688] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 2.877035] VFS: Mounted root (ext4 filesystem) readonly on device 8:3. [ 2.879583] devtmpfs: mounted [ 2.885585] Freeing unused kernel memory: 636k freed [ 2.888283] Write protecting the kernel read-only data: 12288k [ 2.898247] Freeing unused kernel memory: 952k freed [ 2.906053] usb 3-2: ep0 maxpacket = 8 [ 2.906475] Freeing unused kernel memory: 748k freed [ 2.935439] usb 3-2: default language 0x0409 [ 2.944432] usb 3-2: udev 2, busnum 3, minor = 257 [ 2.944438] usb 3-2: New USB device found, idVendor=08ff, idProduct=2810 [ 2.946502] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.948570] usb 3-2: Product: Fingerprint Sensor [ 2.950942] usb 3-2: usb_probe_device [ 2.950951] usb 3-2: configuration #1 chosen from 1 choice [ 2.953442] usb 3-2: adding 3-2:1.0 (config #1, interface 0) [ 2.953679] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.953692] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0006 [ 2.953706] uhci_hcd 0000:00:1d.0: port 1 portsc 01a3,00 [ 2.953721] hub 6-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s [ 2.953739] hub 5-0:1.0: hub_suspend [ 2.953746] usb usb5: bus auto-suspend, wakeup 1 [ 2.953751] usb usb5: suspend_rh [ 3.034251] cat (1132) used greatest stack depth: 5000 bytes left [ 3.051057] [drm:intel_crtc_set_config], [CRTC:3] [FB:44] #connectors=1 (x y) (0 0) [ 3.051065] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 3.051071] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 3.051076] [drm:intel_crtc_set_config], [CRTC:4] [FB:44] #connectors=1 (x y) (0 0) [ 3.051080] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 3.051083] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 3.057044] hub 6-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 [ 3.061633] setfont (1133) used greatest stack depth: 4904 bytes left [ 3.085271] init-early.sh (1131) used greatest stack depth: 4560 bytes left [ 3.120205] irq 16: nobody cared (try booting with the "irqpoll" option) [ 3.121103] Pid: 1142, comm: init.sh Not tainted 3.8.0-rc3+ #1 [ 3.121103] Call Trace: [ 3.121103] [] __report_bad_irq+0x2c/0xbd [ 3.121103] [] note_interrupt+0x15f/0x1dd [ 3.121103] [] handle_irq_event_percpu+0x173/0x18b [ 3.121103] [] handle_irq_event+0x33/0x51 [ 3.121103] [] handle_fasteoi_irq+0x73/0xa6 [ 3.121103] [] handle_irq+0x125/0x12e [ 3.121103] [] ? irq_enter+0x13/0x64 [ 3.121103] [] do_IRQ+0x48/0xa0 [ 3.121103] [] common_interrupt+0x6a/0x6a [ 3.121103] [] ? unmap_single_vma+0x4ad/0x5b7 [ 3.121103] [] ? unmap_single_vma+0x28c/0x5b7 [ 3.121103] [] ? release_pages+0x175/0x184 [ 3.121103] [] unmap_vmas+0x43/0x6b [ 3.121103] [] exit_mmap+0x91/0x10f [ 3.121103] [] mmput+0x2f/0xc1 [ 3.121103] [] flush_old_exec+0x534/0x5e0 [ 3.121103] [] load_elf_binary+0x2c1/0x1787 [ 3.121103] [] ? _raw_read_lock+0x9/0xb [ 3.121103] [] ? load_misc_binary+0x50/0x2cd [ 3.121103] [] ? get_user_pages+0x4d/0x4f [ 3.121103] [] ? get_arg_page+0x7f/0xc3 [ 3.121103] [] ? put_page+0x1e/0x2e [ 3.121103] [] search_binary_handler+0xdd/0x2d7 [ 3.121103] [] ? elf_core_dump+0x1156/0x1156 [ 3.121103] [] do_execve_common.isra.23+0x2bb/0x3bd [ 3.121103] [] do_execve+0x13/0x15 [ 3.121103] [] sys_execve+0x36/0x4c [ 3.121103] [] stub_execve+0x69/0xc0 [ 3.121103] handlers: [ 3.121103] [] usb_hcd_irq [ 3.121103] Disabling IRQ #16 [ 3.188316] usb 6-1: new low-speed USB device number 2 using uhci_hcd [ 3.704118] usb 6-1: skipped 1 descriptor after interface [ 3.704130] usb 6-1: skipped 1 descriptor after interface [ 3.807798] systemd-udevd[1252]: starting version 197 [ 3.829075] usb 6-1: default language 0x0409 [ 3.870270] udevadm (1258) used greatest stack depth: 3904 bytes left [ 3.937624] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692 [ 3.938146] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 3.938152] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 3.938156] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 3.938160] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled [ 3.938164] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled [ 3.938169] iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 3.938242] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 3.938617] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio. [ 3.946029] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 3.957668] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 3.967717] hda_codec: CX20561 (Hermosa): BIOS auto-probing. [ 4.053968] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 4.053973] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 4.053976] thinkpad_acpi: ThinkPad BIOS 6EET19WW (1.00g), EC 6EHT07WW-1.00b [ 4.053979] thinkpad_acpi: Lenovo ThinkPad X301, model 2776P7F [ 4.075470] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 4.075698] thinkpad_acpi: radio switch found; radios are disabled [ 4.075722] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 4.075725] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 4.090631] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked [ 4.103975] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 4.104756] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 4.118629] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7 [ 4.144079] usb 6-1: udev 2, busnum 6, minor = 641 [ 4.144087] usb 6-1: New USB device found, idVendor=046a, idProduct=0101 [ 4.144092] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.144097] usb 6-1: Product: Wireless Desktop [ 4.144100] usb 6-1: Manufacturer: MLK [ 4.144238] usb 6-1: usb_probe_device [ 4.144245] usb 6-1: configuration #1 chosen from 1 choice [ 4.344105] usb 6-1: adding 6-1:1.0 (config #1, interface 0) [ 4.454205] usbhid 6-1:1.0: usb_probe_interface [ 4.454216] usbhid 6-1:1.0: usb_probe_interface - got id [ 4.644899] input: MLK Wireless Desktop as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input8 [ 4.644928] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us [ 4.645220] hid-generic 0003:046A:0101.0001: input,hidraw0: USB HID v1.00 Keyboard [MLK Wireless Desktop] on usb-0000:00:1d.0-1/input0 [ 4.645288] usb 6-1: adding 6-1:1.1 (config #1, interface 1) [ 4.744180] usbhid 6-1:1.1: usb_probe_interface [ 4.744188] usbhid 6-1:1.1: usb_probe_interface - got id [ 4.945396] input: MLK Wireless Desktop as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/input/input9 [ 4.945417] uhci_hcd 0000:00:1d.0: reserve dev 2 ep82-INT, period 8, phase 4, 118 us [ 4.945705] usbhid 6-1:1.1: looking for a minor, starting at 96 [ 4.945957] hid-generic 0003:046A:0101.0002: input,hiddev0,hidraw1: USB HID v1.00 Mouse [MLK Wireless Desktop] on usb-0000:00:1d.0-1/input1 [ 4.946093] uhci_hcd 0000:00:1d.0: port 2 portsc 01a3,00 [ 4.946111] hub 6-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 5.050114] hub 6-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 5.152101] usb 6-2: new low-speed USB device number 3 using uhci_hcd [ 5.704128] usb 6-2: skipped 1 descriptor after interface [ 5.704138] usb 6-2: skipped 1 descriptor after interface [ 5.844099] usb 6-2: default language 0x0409 [ 6.144114] usb 6-2: udev 3, busnum 6, minor = 642 [ 6.144124] usb 6-2: New USB device found, idVendor=046d, idProduct=c51b [ 6.144133] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.144140] usb 6-2: Product: USB Receiver [ 6.144147] usb 6-2: Manufacturer: Logitech [ 6.144377] usb 6-2: usb_probe_device [ 6.144386] usb 6-2: configuration #1 chosen from 1 choice [ 6.344115] usb 6-2: adding 6-2:1.0 (config #1, interface 0) [ 6.344213] usbhid 6-2:1.0: usb_probe_interface [ 6.344221] usbhid 6-2:1.0: usb_probe_interface - got id [ 6.544762] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input10 [ 6.545193] hid-generic 0003:046D:C51B.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0 [ 6.545252] usb 6-2: adding 6-2:1.1 (config #1, interface 1) [ 6.545345] usbhid 6-2:1.1: usb_probe_interface [ 6.545352] usbhid 6-2:1.1: usb_probe_interface - got id [ 6.744113] usbhid 6-2:1.1: looking for a minor, starting at 96 [ 6.744412] hid-generic 0003:046D:C51B.0004: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1 [ 6.744533] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0004 [ 6.744557] ehci-pci 0000:00:1a.7: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 6.744574] hub 1-0:1.0: port 2, status 0100, change 0001, 12 Mb/s [ 6.848056] hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 [ 6.848069] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000 [ 6.848081] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0006 [ 6.848093] ehci-pci 0000:00:1d.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 6.848103] hub 2-0:1.0: port 1, status 0100, change 0001, 12 Mb/s [ 6.848117] hub 1-1:1.0: hub_suspend [ 6.848127] usb 1-1: unlink qh256-0001/ffff880136bc9380 start 1 [1/0 us] [ 6.850218] usb 1-1: usb auto-suspend, wakeup 1 [ 6.952090] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 [ 6.952113] ehci-pci 0000:00:1d.7: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 6.952129] hub 2-0:1.0: port 2, status 0100, change 0001, 12 Mb/s [ 7.056101] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 [ 7.056123] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 7.056142] hub 2-0:1.0: hub_suspend [ 7.056156] usb usb2: bus auto-suspend, wakeup 1 [ 7.056163] ehci-pci 0000:00:1d.7: suspend root hub [ 7.607455] EXT4-fs (sda3): re-mounted. Opts: user_xattr [ 7.843315] Adding 4891788k swap on /dev/sda2. Priority:-1 extents:1 across:4891788k SS [ 8.381074] [drm:intel_crtc_set_config], [CRTC:3] [FB:44] #connectors=1 (x y) (0 0) [ 8.381085] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 8.381090] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 8.381097] [drm:intel_crtc_set_config], [CRTC:4] [FB:44] #connectors=1 (x y) (0 0) [ 8.381104] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 8.381108] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 10.095803] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 10.196186] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 10.196338] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.056812] [drm:i915_driver_open], [ 11.056862] [drm:intel_crtc_set_config], [CRTC:3] [FB:44] #connectors=1 (x y) (0 0) [ 11.056871] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 11.056876] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 11.056881] [drm:intel_crtc_set_config], [CRTC:4] [FB:44] #connectors=1 (x y) (0 0) [ 11.056886] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 11.056889] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 11.084336] [drm:intel_crtc_set_config], [CRTC:3] [FB:44] #connectors=1 (x y) (0 0) [ 11.084343] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 11.084347] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 11.084351] [drm:intel_crtc_set_config], [CRTC:4] [FB:44] #connectors=1 (x y) (0 0) [ 11.084354] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 11.084357] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 11.091098] [drm:i915_driver_open], [ 11.091123] [drm:intel_crtc_set_config], [CRTC:3] [FB:44] #connectors=1 (x y) (0 0) [ 11.091129] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 11.091133] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 11.091137] [drm:intel_crtc_set_config], [CRTC:4] [FB:44] #connectors=1 (x y) (0 0) [ 11.091142] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 11.091146] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 11.091164] [drm:i915_driver_open], [ 11.091198] [drm:intel_crtc_set_config], [CRTC:3] [FB:44] #connectors=1 (x y) (0 0) [ 11.091204] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 11.091208] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 11.091211] [drm:intel_crtc_set_config], [CRTC:4] [FB:44] #connectors=1 (x y) (0 0) [ 11.091217] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 11.091220] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 11.092581] [drm:i915_driver_open], [ 11.092597] [drm:intel_crtc_set_config], [CRTC:3] [FB:44] #connectors=1 (x y) (0 0) [ 11.092604] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 11.092607] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 11.092611] [drm:intel_crtc_set_config], [CRTC:4] [FB:44] #connectors=1 (x y) (0 0) [ 11.092616] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 11.092620] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 11.092636] [drm:i915_driver_open], [ 11.093424] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 11.093432] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 11.093480] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 11.093485] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 11.093501] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 11.093505] [drm:drm_mode_debug_printmodeline], Modeline 22:"1440x900" 60 102000 1440 1488 1520 1836 900 903 909 926 0x48 0xa [ 11.093511] [drm:drm_mode_debug_printmodeline], Modeline 23:"1440x900" 50 85000 1440 1488 1520 1836 900 903 909 926 0x40 0xa [ 11.093519] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 11.093975] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 11.093981] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 11.101043] [drm:intel_crt_detect], CRT not detected via hotplug [ 11.101204] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 11.101209] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 11.101212] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 11.101215] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 11.101495] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 11.101498] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 11.101502] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 11.101506] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [ 11.101517] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 11.101521] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 11.110036] [drm:intel_crt_detect], CRT not detected via hotplug [ 11.110203] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 11.110210] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 11.110215] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 11.110218] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 11.110488] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 11.110492] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 11.110496] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 11.110501] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [ 11.110604] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 11.110610] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 11.136257] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 11.136282] [drm:drm_mode_debug_printmodeline], Modeline 64:"1920x1080" 0 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6 [ 11.136289] [drm:drm_mode_prune_invalid], Not using 1920x1080 mode 15 [ 11.136298] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] probed modes : [ 11.136302] [drm:drm_mode_debug_printmodeline], Modeline 9:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 11.136308] [drm:drm_mode_debug_printmodeline], Modeline 24:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 11.136314] [drm:drm_mode_debug_printmodeline], Modeline 37:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 11.136321] [drm:drm_mode_debug_printmodeline], Modeline 41:"1680x945" 60 131481 1680 1784 1960 2240 945 946 949 978 0x0 0x6 [ 11.136327] [drm:drm_mode_debug_printmodeline], Modeline 35:"1400x1050" 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x40 0x9 [ 11.136333] [drm:drm_mode_debug_printmodeline], Modeline 40:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6 [ 11.136339] [drm:drm_mode_debug_printmodeline], Modeline 25:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 11.136346] [drm:drm_mode_debug_printmodeline], Modeline 36:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 11.136352] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 11.136359] [drm:drm_mode_debug_printmodeline], Modeline 39:"1366x768" 60 85885 1366 1439 1583 1800 768 769 772 795 0x0 0x6 [ 11.136365] [drm:drm_mode_debug_printmodeline], Modeline 34:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5 [ 11.136372] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 [ 11.136378] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x768" 60 68250 1280 1328 1360 1440 768 771 778 790 0x40 0x9 [ 11.136384] [drm:drm_mode_debug_printmodeline], Modeline 30:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 11.136390] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x576" 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6 [ 11.136397] [drm:drm_mode_debug_printmodeline], Modeline 27:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 11.136403] [drm:drm_mode_debug_printmodeline], Modeline 28:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 11.136409] [drm:drm_mode_debug_printmodeline], Modeline 31:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 11.136415] [drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 11.136435] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 11.136524] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 11.136530] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] [ 11.136535] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected [ 11.136540] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 11.136544] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] [ 11.136548] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected [ 11.136580] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 11.136585] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 11.139008] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 11.144433] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 11.148469] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 11.151071] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 11.151099] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 11.151106] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 11.153531] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 11.157467] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 11.162437] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 11.164048] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 11.164282] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 11.164291] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 11.164321] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 11.164328] [drm:drm_mode_debug_printmodeline], Modeline 22:"1440x900" 60 102000 1440 1488 1520 1836 900 903 909 926 0x48 0xa [ 11.164338] [drm:drm_mode_debug_printmodeline], Modeline 23:"1440x900" 50 85000 1440 1488 1520 1836 900 903 909 926 0x40 0xa [ 11.164351] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 11.166286] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 11.166296] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 11.174070] [drm:intel_crt_detect], CRT not detected via hotplug [ 11.174252] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 11.174263] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 11.174270] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 11.174275] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 11.174561] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 11.174567] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 11.174573] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 11.174580] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [ 11.174593] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 11.174599] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 11.182074] [drm:intel_crt_detect], CRT not detected via hotplug [ 11.182281] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 11.182289] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 11.182295] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 11.182300] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 11.182582] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 11.182587] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 11.182593] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 11.182600] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [ 11.182690] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 11.182699] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 11.208223] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 11.208256] [drm:drm_mode_debug_printmodeline], Modeline 64:"1920x1080" 0 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6 [ 11.208266] [drm:drm_mode_prune_invalid], Not using 1920x1080 mode 15 [ 11.208277] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] probed modes : [ 11.208284] [drm:drm_mode_debug_printmodeline], Modeline 9:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 11.208293] [drm:drm_mode_debug_printmodeline], Modeline 24:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 11.208302] [drm:drm_mode_debug_printmodeline], Modeline 37:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 11.208312] [drm:drm_mode_debug_printmodeline], Modeline 41:"1680x945" 60 131481 1680 1784 1960 2240 945 946 949 978 0x0 0x6 [ 11.208321] [drm:drm_mode_debug_printmodeline], Modeline 35:"1400x1050" 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x40 0x9 [ 11.208330] [drm:drm_mode_debug_printmodeline], Modeline 40:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6 [ 11.208340] [drm:drm_mode_debug_printmodeline], Modeline 25:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 11.208349] [drm:drm_mode_debug_printmodeline], Modeline 36:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 11.208358] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 11.208368] [drm:drm_mode_debug_printmodeline], Modeline 39:"1366x768" 60 85885 1366 1439 1583 1800 768 769 772 795 0x0 0x6 [ 11.208377] [drm:drm_mode_debug_printmodeline], Modeline 34:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5 [ 11.208387] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 [ 11.208396] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x768" 60 68250 1280 1328 1360 1440 768 771 778 790 0x40 0x9 [ 11.208406] [drm:drm_mode_debug_printmodeline], Modeline 30:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 11.208415] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x576" 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6 [ 11.208424] [drm:drm_mode_debug_printmodeline], Modeline 27:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 11.208434] [drm:drm_mode_debug_printmodeline], Modeline 28:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 11.208443] [drm:drm_mode_debug_printmodeline], Modeline 31:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 11.208452] [drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 11.208476] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 11.210370] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 11.210379] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] [ 11.210386] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected [ 11.210395] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 11.210400] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] [ 11.210407] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected [ 11.210447] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 11.210455] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 11.212881] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 11.216460] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 11.220450] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 11.222072] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 11.222085] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 11.222091] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 11.224514] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 11.228491] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 11.232478] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 11.234081] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 11.243990] [drm:intel_opregion_asle_intr], non asle set request?? [ 11.244881] [drm:asle_set_backlight], bclp = 0x800000ff [ 11.244891] [drm:intel_panel_get_max_backlight], max backlight PWM = 2414340 [ 11.244897] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2414340 [ 11.244904] [drm:intel_panel_get_max_backlight], max backlight PWM = 2414340 [ 11.244914] [drm:intel_opregion_asle_intr], non asle set request?? [ 11.247724] [drm:intel_opregion_asle_intr], non asle set request?? [ 11.248630] [drm:asle_set_backlight], bclp = 0x800000ff [ 11.248638] [drm:intel_panel_get_max_backlight], max backlight PWM = 2414340 [ 11.248643] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2414340 [ 11.248650] [drm:intel_panel_get_max_backlight], max backlight PWM = 2414340 [ 11.248659] [drm:intel_opregion_asle_intr], non asle set request?? [ 11.249804] [drm:intel_set_mode], set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 11.249818] [drm:intel_modeset_adjusted_mode], [CRTC:4] [ 11.271076] [drm:intel_update_fbc], fbc set to per-chip default [ 11.271083] [drm:intel_update_fbc], fbc disabled per module param [ 11.271092] [drm:g4x_check_srwm], SR watermark: display plane 79, cursor 6 [ 11.271098] [drm:g4x_check_srwm], display watermark is too large(79/63), disabling [ 11.271104] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=34, cursor=6, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 11.271502] [drm:i9xx_crtc_mode_set], Mode for pipe B: [ 11.271507] [drm:drm_mode_debug_printmodeline], Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 11.271516] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking [ 11.289073] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 7680 [ 11.305097] [drm:intel_update_fbc], fbc set to per-chip default [ 11.305104] [drm:intel_update_fbc], fbc disabled per module param [ 11.305111] [drm:g4x_check_srwm], SR watermark: display plane 79, cursor 6 [ 11.305117] [drm:g4x_check_srwm], display watermark is too large(79/63), disabling [ 11.305124] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=34, cursor=6, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 11.305134] [drm:intel_crtc_mode_set], [ENCODER:14:TMDS-14] set [MODE:43:1920x1200] [ 11.305144] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=34, cursor=6, B: plane=51, cursor=6, SR: plane=0, cursor=0 [ 11.323106] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 11.323119] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1] [ 11.323127] [drm:intel_connector_check_state], [CONNECTOR:15:HDMI-A-1] [ 11.323135] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6] [ 11.323141] [drm:intel_modeset_check_state], [ENCODER:13:DAC-13] [ 11.323148] [drm:intel_modeset_check_state], [ENCODER:14:TMDS-14] [ 11.323154] [drm:intel_modeset_check_state], [ENCODER:18:TMDS-18] [ 11.323160] [drm:intel_modeset_check_state], [ENCODER:20:TMDS-20] [ 11.323166] [drm:intel_modeset_check_state], [CRTC:3] [ 11.323171] [drm:intel_modeset_check_state], [CRTC:4] [ 11.469699] [drm:drm_mode_addfb], [FB:45] [ 11.480906] [drm:drm_mode_setcrtc], [CRTC:3] [ 11.480918] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1] [ 11.480922] [drm:intel_crtc_set_config], [CRTC:3] [FB:45] #connectors=1 (x y) (0 0) [ 11.480929] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 11.480933] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 11.483378] [drm:i9xx_update_plane], Writing base 00910000 00000000 0 0 6144 [ 11.495075] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 11.495134] [drm:drm_mode_setcrtc], [CRTC:4] [ 11.495141] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 11.495149] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [NOCRTC] [ 11.495155] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch [ 11.495161] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 11.495167] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch [ 11.495174] [drm:intel_set_mode], set mode pipe masks: modeset: 0, prepare: 0, disable: 2 [ 11.523071] [drm:intel_update_fbc], fbc set to per-chip default [ 11.523077] [drm:intel_update_fbc], fbc disabled per module param [ 11.523085] [drm:g4x_check_srwm], SR watermark: display plane 79, cursor 6 [ 11.523090] [drm:g4x_check_srwm], display watermark is too large(79/63), disabling [ 11.523097] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=34, cursor=6, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 11.523112] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1] [ 11.523122] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6] [ 11.523128] [drm:intel_modeset_check_state], [ENCODER:13:DAC-13] [ 11.523135] [drm:intel_modeset_check_state], [ENCODER:14:TMDS-14] [ 11.523142] [drm:intel_modeset_check_state], [ENCODER:18:TMDS-18] [ 11.523148] [drm:intel_modeset_check_state], [ENCODER:20:TMDS-20] [ 11.523154] [drm:intel_modeset_check_state], [CRTC:3] [ 11.523159] [drm:intel_modeset_check_state], [CRTC:4] [ 11.523276] [drm:drm_mode_setcrtc], [CRTC:4] [ 11.523287] [drm:drm_mode_setcrtc], [CONNECTOR:15:HDMI-A-1] [ 11.523293] [drm:intel_crtc_set_config], [CRTC:4] [FB:45] #connectors=1 (x y) (0 0) [ 11.523301] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set [ 11.523306] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 11.523311] [drm:drm_mode_debug_printmodeline], Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 11.523321] [drm:drm_mode_debug_printmodeline], Modeline 46:"" 0 88750 1440 1488 1520 1600 900 903 909 926 0x0 0x9 [ 11.523331] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch [ 11.523337] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 11.523344] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:4] [ 11.523350] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch [ 11.523355] [drm:intel_crtc_set_config], attempting to set mode from userspace [ 11.523360] [drm:drm_mode_debug_printmodeline], Modeline 46:"" 0 88750 1440 1488 1520 1600 900 903 909 926 0x0 0x9 [ 11.523370] [drm:intel_set_mode], set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 11.523379] [drm:intel_modeset_adjusted_mode], [CRTC:4] [ 11.523771] [drm:i9xx_crtc_mode_set], Mode for pipe B: [ 11.523776] [drm:drm_mode_debug_printmodeline], Modeline 46:"" 0 88750 1440 1488 1520 1600 900 903 909 926 0x0 0x9 [ 11.523785] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking [ 11.541078] [drm:i9xx_update_plane], Writing base 00910000 00000000 0 0 6144 [ 11.541088] [drm:intel_update_fbc], fbc set to per-chip default [ 11.541093] [drm:intel_update_fbc], fbc disabled per module param [ 11.541099] [drm:g4x_check_srwm], SR watermark: display plane 79, cursor 6 [ 11.541105] [drm:g4x_check_srwm], display watermark is too large(79/63), disabling [ 11.541112] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=34, cursor=6, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 11.541122] [drm:intel_crtc_mode_set], [ENCODER:14:TMDS-14] set [MODE:46:] [ 11.541131] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=34, cursor=6, B: plane=30, cursor=6, SR: plane=0, cursor=0 [ 11.559106] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 11.559118] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1] [ 11.559125] [drm:intel_connector_check_state], [CONNECTOR:15:HDMI-A-1] [ 11.559133] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6] [ 11.559139] [drm:intel_modeset_check_state], [ENCODER:13:DAC-13] [ 11.559146] [drm:intel_modeset_check_state], [ENCODER:14:TMDS-14] [ 11.559152] [drm:intel_modeset_check_state], [ENCODER:18:TMDS-18] [ 11.559158] [drm:intel_modeset_check_state], [ENCODER:20:TMDS-20] [ 11.559164] [drm:intel_modeset_check_state], [CRTC:3] [ 11.559169] [drm:intel_modeset_check_state], [CRTC:4] [ 11.819688] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 8, phase 4, 118 us [ 13.009971] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 13.010074] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 41.253850] mount.nfs (2526) used greatest stack depth: 2808 bytes left