0000:00:00.0 Host bridge: IBM: Unknown device 02a1 (rev 01)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 240
	Capabilities: [60] PCI-X non-bridge device.
		Command: DPERE- ERO- RBC=0 OST=1
		Status: Bus=0 Dev=0 Func=0 64bit+ 133MHz+ SCD- USC-, DC=bridge, DMMRBC=0, DMOST=1, DMCRS=0, RSCEM-

0000:00:01.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] (prog-if 00 [VGA])
	Subsystem: IBM: Unknown device 02c8
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 240 (2000ns min), Cache Line Size: 0x10 (64 bytes)
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
	Region 1: I/O ports at 1800 [size=256]
	Region 2: Memory at f2c00000 (32-bit, non-prefetchable) [size=64K]
	Expansion ROM at f0000000 [disabled] [size=128K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:03.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
	Subsystem: NEC Corporation USB
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 240 (250ns min, 10500ns max), Cache Line Size: 0x10 (64 bytes)
	Interrupt: pin A routed to IRQ 185
	Region 0: Memory at f2c10000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:03.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
	Subsystem: NEC Corporation USB
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 240 (250ns min, 10500ns max), Cache Line Size: 0x10 (64 bytes)
	Interrupt: pin B routed to IRQ 185
	Region 0: Memory at f2c11000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:03.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if 20 [EHCI])
	Subsystem: NEC Corporation USB 2.0
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 240 (4000ns min, 8500ns max), Cache Line Size: 0x20 (128 bytes)
	Interrupt: pin C routed to IRQ 185
	Region 0: Memory at f2c12000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:0f.0 Host bridge: Broadcom CSB6 South Bridge (rev a0)
	Subsystem: Broadcom: Unknown device 0201
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 240

0000:00:0f.1 IDE interface: Broadcom CSB6 RAID/IDE Controller (rev a0) (prog-if 82 [Master PriP])
	Subsystem: Broadcom: Unknown device 0212
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Region 0: I/O ports at <ignored>
	Region 1: I/O ports at <ignored>
	Region 2: I/O ports at <ignored>
	Region 3: I/O ports at <ignored>
	Region 4: I/O ports at 0700 [size=16]

0000:00:0f.3 ISA bridge: Broadcom GCLE-2 Host Bridge
	Subsystem: Broadcom: Unknown device 0230
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

0000:01:00.0 Host bridge: IBM: Unknown device 02a1 (rev 01)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 240
	Capabilities: [60] PCI-X non-bridge device.
		Command: DPERE- ERO- RBC=0 OST=1
		Status: Bus=1 Dev=0 Func=0 64bit+ 133MHz+ SCD- USC-, DC=bridge, DMMRBC=0, DMOST=1, DMCRS=0, RSCEM-

0000:01:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
	Subsystem: IBM: Unknown device 02e7
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 240 (16000ns min), Cache Line Size: 0x10 (64 bytes)
	Interrupt: pin A routed to IRQ 169
	Region 0: Memory at f2dc0000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [40] 	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
	Capabilities: [50] Vital Product Data
	Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
		Address: 8a66872e242367cc  Data: 0102

0000:01:01.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
	Subsystem: IBM: Unknown device 02e7
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 240 (16000ns min), Cache Line Size: 0x10 (64 bytes)
	Interrupt: pin B routed to IRQ 177
	Region 0: Memory at f2dd0000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [40] 	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D3 PME-Enable+ DSel=0 DScale=1 PME-
	Capabilities: [50] Vital Product Data
	Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
		Address: 9e8ea6714c856544  Data: 9d4d

0000:01:02.0 SCSI storage controller: Adaptec: Unknown device 041e (rev 08)
	Subsystem: IBM: Unknown device 02e7
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 240 (32000ns min, 26750ns max), Cache Line Size: 0x10 (64 bytes)
	Interrupt: pin A routed to IRQ 201
	Region 0: Memory at f2d80000 (64-bit, non-prefetchable) [size=256K]
	Region 2: Memory at f1400000 (64-bit, prefetchable) [size=128K]
	Region 4: I/O ports at 2000 [size=256]
	Expansion ROM at f0080000 [disabled] [size=512K]
	Capabilities: [40] PCI-X non-bridge device.
		Command: DPERE- ERO- RBC=3 OST=4
		Status: Bus=1 Dev=2 Func=0 64bit+ 133MHz+ SCD- USC-, DC=simple, DMMRBC=3, DMOST=4, DMCRS=4, RSCEM-
	Capabilities: [58] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [e0] Message Signalled Interrupts: 64bit+ Queue=0/2 Enable-
		Address: 0000000000000000  Data: 0000

0000:02:00.0 Host bridge: IBM: Unknown device 02a1 (rev 01)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 240
	Capabilities: [60] PCI-X non-bridge device.
		Command: DPERE- ERO- RBC=0 OST=1
		Status: Bus=2 Dev=0 Func=0 64bit+ 133MHz+ SCD- USC-, DC=bridge, DMMRBC=0, DMOST=1, DMCRS=0, RSCEM-

0000:04:00.0 Host bridge: IBM: Unknown device 02a1 (rev 01)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 240
	Capabilities: [60] PCI-X non-bridge device.
		Command: DPERE- ERO- RBC=0 OST=1
		Status: Bus=4 Dev=0 Func=0 64bit+ 133MHz+ SCD- USC-, DC=bridge, DMMRBC=0, DMOST=1, DMCRS=0, RSCEM-

0000:06:00.0 Host bridge: IBM: Unknown device 02a1 (rev 01)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 240
	Capabilities: [60] PCI-X non-bridge device.
		Command: DPERE- ERO- RBC=0 OST=1
		Status: Bus=6 Dev=0 Func=0 64bit+ 133MHz+ SCD- USC-, DC=bridge, DMMRBC=0, DMOST=1, DMCRS=0, RSCEM-

0000:08:00.0 Host bridge: IBM: Unknown device 02a1 (rev 01)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 240
	Capabilities: [60] PCI-X non-bridge device.
		Command: DPERE- ERO- RBC=0 OST=1
		Status: Bus=8 Dev=0 Func=0 64bit+ 133MHz+ SCD- USC-, DC=bridge, DMMRBC=0, DMOST=1, DMCRS=0, RSCEM-

0000:0a:00.0 Host bridge: IBM: Unknown device 02a1 (rev 01)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 240
	Capabilities: [60] PCI-X non-bridge device.
		Command: DPERE- ERO- RBC=0 OST=1
		Status: Bus=10 Dev=0 Func=0 64bit+ 133MHz+ SCD- USC-, DC=bridge, DMMRBC=0, DMOST=1, DMCRS=0, RSCEM-

0000:0a:01.0 Multimedia audio controller: Aureal Semiconductor Vortex 1 (rev 02)
	Subsystem: Voyetra Technologies Montego
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 240 (500ns min, 3000ns max), Cache Line Size: 0x10 (64 bytes)
	Interrupt: pin A routed to IRQ 193
	Region 0: Memory at f2e00000 (32-bit, non-prefetchable) [size=128K]
	Region 1: I/O ports at 2800 [size=8]
	Region 2: I/O ports at 2808 [size=8]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:0c:00.0 Host bridge: IBM: Unknown device 02a1 (rev 01)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 240
	Capabilities: [60] PCI-X non-bridge device.
		Command: DPERE- ERO- RBC=0 OST=1
		Status: Bus=12 Dev=0 Func=0 64bit+ 133MHz+ SCD- USC-, DC=bridge, DMMRBC=0, DMOST=1, DMCRS=0, RSCEM-