kernel /vmlinuz-2.4.22 ro root=/dev/hde2 console=tty0 console=ttyS0,115200n8 hd g=noprobe pci=noacpi [Linux-bzImage, setup=0xc00, size=0x18281d] Linux version 2.4.22 (lenb@dhcppc7) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Sep 11 18:23:42 EDT 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009b400 (usable) BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ff70000 (usable) BIOS-e820: 000000003ff70000 - 000000003ff7b000 (ACPI data) BIOS-e820: 000000003ff7b000 - 000000003ff80000 (ACPI NVS) BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Warning only 896MB will be used. Use a HIGHMEM enabled kernel. 896MB LOWMEM available. found SMP MP-table at 000f6130 hm, page 000f6000 reserved twice. hm, page 000f7000 reserved twice. hm, page 0009b000 reserved twice. hm, page 0009c000 reserved twice. On node 0 totalpages: 229376 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 0 pages. ACPI: RSDP (v000 PTLTD ) @ 0x000f6170 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x3ff76ee4 ACPI: FADT (v001 INTEL E7505 0x06040000 PTL 0x00000008) @ 0x3ff7ae78 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x3ff7aeec ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x3ff7af88 ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x3ff7afb0 ACPI: DSDT (v001 INTEL E7505 0x06040000 MSFT 0x0100000e) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) Processor #6 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) Processor #7 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] polarity[0x1] trigger[0x1] lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] polarity[0x1] trigger[0x1] lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] polarity[0x1] trigger[0x1] lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23 ACPI: IOAPIC (id[0x03] address[0xfec80000] global_irq_base[0x18]) IOAPIC[1]: Assigned apic_id 3 IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, IRQ 24-47 ACPI: IOAPIC (id[0x04] address[0xfec80400] global_irq_base[0x30]) IOAPIC[2]: Assigned apic_id 4 IOAPIC[2]: apic_id 4, version 32, address 0xfec80400, IRQ 48-71 ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x1] trigger[0x1]) ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3]) Using ACPI (MADT) for SMP configuration information Kernel command line: ro root=/dev/hde2 console=tty0 console=ttyS0,115200n8 hdg=noprobe pci=noacpi ide_setup: hdg=noprobe Initializing CPU#0 Detected 2790.759 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 5570.56 BogoMIPS Memory: 903592k/917504k available (2398k kernel code, 13508k reserved, 813k data, 148k init, 0k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=0 testing the IO APIC....................... .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2790.6598 MHz. ..... host bus clock speed is 132.8884 MHz. cpu: 0, clocks: 1328884, slice: 664442 CPU0 ACPI: Subsystem revision 20030813 PCI: PCI BIOS revision 2.10 entry at 0xfd8f5, last bus=5 PCI: Using configuration type 1 tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired … Table [DSDT](id F004) - 447 Objects with 53 Devices 137 Methods 19 Regions ACPI Namespace successfully loaded at root c045df1c evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful evgpeblk-0748 [06] ev_create_gpe_block : GPE 00 to 31 [_GPE] 4 regs at 0000000000001028 on int 9 Completing Region/Field/Buffer/Package initialization:............................................ Initialized 19/19 Regions 0/0 Fields 21/21 Buffers 4/4 Packages (455 nodes) Executing all Device _STA and_INI methods:...................................................... 54 Devices found containing: 54 _STA, 1 _INI methods ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge [ACPI Debug] Buffer: Length 06 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15) [ACPI Debug] Buffer: Length 06 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 14 15) [ACPI Debug] Buffer: Length 06 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15, disabled) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15, disabled) PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0 PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 3! PCI BIOS passed nonexistent PCI bus 2! PCI BIOS passed nonexistent PCI bus 4! PCI BIOS passed nonexistent PCI bus 2! PCI BIOS passed nonexistent PCI bus 4! PCI BIOS passed nonexistent PCI bus 2! PCI BIOS passed nonexistent PCI bus 5! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 5! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 5! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 5! PCI BIOS passed nonexistent PCI bus 0! isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS not found. Starting kswapd Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) ACPI: Processor [CPU2] (supports C1) ACPI: Processor [CPU3] (supports C1) ACPI: Processor [CPU4] (supports C1) ACPI: Processor [CPU5] (supports C1) ACPI: Processor [CPU6] (supports C1) ACPI: Processor [CPU7] (supports C1) Asus Laptop ACPI Extras version 0.24a parport0: PC-style at 0x378 (0x778) [PCSPP(,...)] parport0: irq 7 detected pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 5.1.13-k1 Copyright (c) 1999-2003 Intel Corporation. eth0: Intel(R) PRO/1000 Network Connection Intel(R) PRO/100 Network Driver - version 2.3.18-k1 Copyright (c) 2003 Intel Corporation e100: eth1: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled cpu cycle saver enabled e100: eth2: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled cpu cycle saver enabled e100: eth3: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled cpu cycle saver enabled e100: eth4: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled cpu cycle saver enabled Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 816M agpgart: Unsupported Intel chipset (device id: 2550), you might want to try agp_try_unsupported=1. [drm] Initialized tdfx 1.0.0 20010216 on minor 0 [drm] Initialized radeon 1.1.1 20010405 on minor 1 [drm:drm_init] *ERROR* Cannot initialize the agpgart module. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 00:1f.1 ICH4: chipset revision 2 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x6860-0x6867, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x6868-0x686f, BIOS settings: hdc:DMA, hdd:pio SiI3112 Serial ATA: IDE controller at PCI slot 05:04.0 SiI3112 Serial ATA: chipset revision 2 SiI3112 Serial ATA: not 100% native mode: will probe irqs later ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio hdc: LTN483, ATAPI CD/DVD-ROM drive hde: ST3120023AS, ATA DISK drive blk: queue c0477028, I/O limit 4095Mb (mask 0xffffffff) ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0xf8835080-0xf8835087,0xf883508a on irq 10 hde: attached ide-disk driver. hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: host protected area => 1 hde: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=232581/16/63, UDMA(133) hde: lost interrupt hde: lost interrupt hdc: attached ide-cdrom driver. hdc: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: hde:<4>hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt [PTBL] [14593/255/63] hde1 hde2 hde3 SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Intel 810 + AC97 Audio, version 0.24, 18:23:38 Sep 11 2003 es1371: version v0.32 time 18:23:42 Sep 11 2003 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh) usb.c: registered new driver usbdevfs usb.c: registered new driver hub host/usb-uhci.c: $Revision: 1.275 $ time 18:23:43 Sep 11 2003 host/usb-uhci.c: High bandwidth mode enabled host/usb-uhci.c: USB UHCI at I/O 0x6800, IRQ 11 host/usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected host/usb-uhci.c: USB UHCI at I/O 0x6820, IRQ 10 host/usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected host/usb-uhci.c: USB UHCI at I/O 0x6840, IRQ 5 host/usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. ds: no socket drivers loaded! hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery