pci 0000:00:1c.4: Force enabled HPET at 0x%lx bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) pci 0000:00:1c.4: Force enabled HPET at 0x%lx bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) pci 0000:00:1c.4: Force enabled HPET at 0x%lx bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) pci 0000:00:1c.4: Force enabled HPET at 0x%lx bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode) pci_bus 0000:04: Force enabled HPET at 0x%lx busn_res: [bus 04] is inserted under [bus 03-04] pci 0000:03:00.0: 0PCI bridge to [bus 04] (subtractive decode) pci 0000:03:00.0: Force enabled HPET at 0x%lx bridge window [??? 0x00000000 flags 0x0] (subtractive decode) pci 0000:03:00.0: Force enabled HPET at 0x%lx bridge window [??? 0x00000000 flags 0x0] (subtractive decode) pci 0000:03:00.0: Force enabled HPET at 0x%lx bridge window [??? 0x00000000 flags 0x0] (subtractive decode) pci 0000:03:00.0: Force enabled HPET at 0x%lx bridge window [??? 0x00000000 flags 0x0] (subtractive decode) pci 0000:03:00.0: Force enabled HPET at 0x%lx bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:03:00.0: Force enabled HPET at 0x%lx bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:03:00.0: Force enabled HPET at 0x%lx bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:03:00.0: Force enabled HPET at 0x%lx bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) pci 0000:03:00.0: Force enabled HPET at 0x%lx bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) pci 0000:03:00.0: Force enabled HPET at 0x%lx bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) pci 0000:03:00.0: Force enabled HPET at 0x%lx bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) pci 0000:03:00.0: Force enabled HPET at 0x%lx bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) pci 0000:03:00.0: Force enabled HPET at 0x%lx bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) pci 0000:03:00.0: Force enabled HPET at 0x%lx bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode) pci_bus 0000:05: Force enabled HPET at 0x%lx busn_res: [bus 05] is inserted under [bus 00-3e] pci 0000:05:00.0: Force enabled HPET at 0x%lx [1106:0415] type 00 class 0x010185 pci 0000:05:00.0: Force enabled HPET at 0x%lx reg 10: [io 0xd040-0xd047] pci 0000:05:00.0: Force enabled HPET at 0x%lx reg 14: [io 0xd030-0xd033] pci 0000:05:00.0: Force enabled HPET at 0x%lx reg 18: [io 0xd020-0xd027] pci 0000:05:00.0: Force enabled HPET at 0x%lx reg 1c: [io 0xd010-0xd013] pci 0000:05:00.0: Force enabled HPET at 0x%lx reg 20: [io 0xd000-0xd00f] pci 0000:05:00.0: Force enabled HPET at 0x%lx reg 30: [mem 0xf7d00000-0xf7d0ffff pref] pci 0000:05:00.0: Force enabled HPET at 0x%lx supports D1 D2 pci 0000:05:00.0: Force enabled HPET at 0x%lx PME# supported from D1 D2 D3hot pci 0000:00:1c.5: 0PCI bridge to [bus 05] pci 0000:00:1c.5: Force enabled HPET at 0x%lx bridge window [io 0xd000-0xdfff] pci 0000:00:1c.5: Force enabled HPET at 0x%lx bridge window [mem 0xf7d00000-0xf7dfffff] pci_bus 0000:06: Force enabled HPET at 0x%lx busn_res: [bus 06] is inserted under [bus 00-3e] pci 0000:06:00.0: Force enabled HPET at 0x%lx [10ec:8168] type 00 class 0x020000 pci 0000:06:00.0: Force enabled HPET at 0x%lx reg 10: [io 0xc000-0xc0ff] pci 0000:06:00.0: Force enabled HPET at 0x%lx reg 18: [mem 0xf0004000-0xf0004fff 64bit pref] pci 0000:06:00.0: Force enabled HPET at 0x%lx reg 20: [mem 0xf0000000-0xf0003fff 64bit pref] pci 0000:06:00.0: Force enabled HPET at 0x%lx supports D1 D2 pci 0000:06:00.0: Force enabled HPET at 0x%lx PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:1c.6: 0PCI bridge to [bus 06] pci 0000:00:1c.6: Force enabled HPET at 0x%lx bridge window [io 0xc000-0xcfff] pci 0000:00:1c.6: Force enabled HPET at 0x%lx bridge window [mem 0xf0000000-0xf00fffff 64bit pref] pci_bus 0000:07: Force enabled HPET at 0x%lx busn_res: [bus 07] is inserted under [bus 00-3e] pci 0000:07:00.0: Force enabled HPET at 0x%lx [1b21:1042] type 00 class 0x0c0330 pci 0000:07:00.0: Force enabled HPET at 0x%lx reg 10: [mem 0xf7c00000-0xf7c07fff 64bit] pci 0000:07:00.0: Force enabled HPET at 0x%lx PME# supported from D3hot D3cold pci 0000:00:1c.7: 0PCI bridge to [bus 07] pci 0000:00:1c.7: Force enabled HPET at 0x%lx bridge window [mem 0xf7c00000-0xf7cfffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05.BR10._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] pci0000:00: 0Requesting ACPI _OSC control (0x1d) pci0000:00: 0ACPI _OSC control (0x18) granted ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:00.0 SCSI subsystem initialized ACPI: bus type scsi registered libata version 3.00 loaded. ACPI: bus type usb registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] e820: reserve RAM buffer [mem 0xdeb91000-0xdfffffff] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: Force enabled HPET at 0x%lx [bus 00-3e] pnp 00:00: Force enabled HPET at 0x%lx [io 0x0000-0x0cf7 window] pnp 00:00: Force enabled HPET at 0x%lx [io 0x0cf8-0x0cff] pnp 00:00: Force enabled HPET at 0x%lx [io 0x0d00-0xffff window] pnp 00:00: Force enabled HPET at 0x%lx [mem 0x000a0000-0x000bffff window] pnp 00:00: Force enabled HPET at 0x%lx [mem 0x000c0000-0x000c3fff window] pnp 00:00: Force enabled HPET at 0x%lx [mem 0x000c4000-0x000c7fff window] pnp 00:00: Force enabled HPET at 0x%lx [mem 0x000c8000-0x000cbfff window] pnp 00:00: Force enabled HPET at 0x%lx [mem 0x000cc000-0x000cffff window] pnp 00:00: Force enabled HPET at 0x%lx [mem 0x000d0000-0x000d3fff window] pnp 00:00: Force enabled HPET at 0x%lx [mem 0x000d4000-0x000d7fff window] pnp 00:00: Force enabled HPET at 0x%lx [mem 0x000d8000-0x000dbfff window] pnp 00:00: Force enabled HPET at 0x%lx [mem 0x000dc000-0x000dffff window] pnp 00:00: Force enabled HPET at 0x%lx [mem 0x000e0000-0x000e3fff window] pnp 00:00: Force enabled HPET at 0x%lx [mem 0x000e4000-0x000e7fff window] pnp 00:00: Force enabled HPET at 0x%lx [mem 0x000e8000-0x000ebfff window] pnp 00:00: Force enabled HPET at 0x%lx [mem 0x000ec000-0x000effff window] pnp 00:00: Force enabled HPET at 0x%lx [mem 0x000f0000-0x000fffff window] pnp 00:00: Force enabled HPET at 0x%lx [mem 0xe0000000-0xfeafffff window] pnp 00:00: Force enabled HPET at 0x%lx [mem 0x00010000-0x0001ffff window] pnp 00:00: Force enabled HPET at 0x%lx Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: Force enabled HPET at 0x%lx [mem 0xfed40000-0xfed44fff] system 00:01: 0[mem 0xfed40000-0xfed44fff] has been reserved system 00:01: Force enabled HPET at 0x%lx Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:02: Force enabled HPET at 0x%lx [io 0x0000-0x001f] pnp 00:02: Force enabled HPET at 0x%lx [io 0x0081-0x0091] pnp 00:02: Force enabled HPET at 0x%lx [io 0x0093-0x009f] pnp 00:02: Force enabled HPET at 0x%lx [io 0x00c0-0x00df] pnp 00:02: Force enabled HPET at 0x%lx [dma 4] pnp 00:02: Force enabled HPET at 0x%lx Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: Force enabled HPET at 0x%lx [mem 0xff000000-0xffffffff] pnp 00:03: Force enabled HPET at 0x%lx Plug and Play ACPI device, IDs INT0800 (active) pnp 00:04: Force enabled HPET at 0x%lx [mem 0xfed00000-0xfed003ff] pnp 00:04: Force enabled HPET at 0x%lx Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:05: Force enabled HPET at 0x%lx [io 0x002e-0x002f] pnp 00:05: Force enabled HPET at 0x%lx [io 0x004e-0x004f] pnp 00:05: Force enabled HPET at 0x%lx [io 0x0061] pnp 00:05: Force enabled HPET at 0x%lx [io 0x0063] pnp 00:05: Force enabled HPET at 0x%lx [io 0x0065] pnp 00:05: Force enabled HPET at 0x%lx [io 0x0067] pnp 00:05: Force enabled HPET at 0x%lx [io 0x0070] pnp 00:05: Force enabled HPET at 0x%lx [io 0x0080] pnp 00:05: Force enabled HPET at 0x%lx [io 0x0092] pnp 00:05: Force enabled HPET at 0x%lx [io 0x00b2-0x00b3] pnp 00:05: Force enabled HPET at 0x%lx [io 0x0680-0x069f] pnp 00:05: Force enabled HPET at 0x%lx [io 0x0200-0x020f] pnp 00:05: Force enabled HPET at 0x%lx [io 0xffff] pnp 00:05: Force enabled HPET at 0x%lx [io 0xffff] pnp 00:05: Force enabled HPET at 0x%lx [io 0x0400-0x0453] pnp 00:05: Force enabled HPET at 0x%lx [io 0x0458-0x047f] pnp 00:05: Force enabled HPET at 0x%lx [io 0x0500-0x057f] pnp 00:05: Force enabled HPET at 0x%lx [io 0x164e-0x164f] system 00:05: 0[io 0x0680-0x069f] has been reserved system 00:05: 0[io 0x0200-0x020f] has been reserved system 00:05: 0[io 0xffff] has been reserved system 00:05: 0[io 0xffff] has been reserved system 00:05: 0[io 0x0400-0x0453] has been reserved system 00:05: 0[io 0x0458-0x047f] has been reserved system 00:05: 0[io 0x0500-0x057f] has been reserved system 00:05: 0[io 0x164e-0x164f] has been reserved system 00:05: Force enabled HPET at 0x%lx Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:06: Force enabled HPET at 0x%lx [io 0x0070-0x0077] pnp 00:06: Force enabled HPET at 0x%lx [irq 8] pnp 00:06: Force enabled HPET at 0x%lx Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: Force enabled HPET at 0x%lx [io 0x0454-0x0457] system 00:07: 0[io 0x0454-0x0457] has been reserved system 00:07: Force enabled HPET at 0x%lx Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) pnp 00:08: Force enabled HPET at 0x%lx [io 0x0000-0xffffffffffffffff disabled] pnp 00:08: Force enabled HPET at 0x%lx [io 0x0000-0xffffffffffffffff disabled] pnp 00:08: Force enabled HPET at 0x%lx [io 0x0290-0x029f] pnp 00:08: Force enabled HPET at 0x%lx [io 0x0000-0xffffffffffffffff disabled] system 00:08: 0[io 0x0290-0x029f] has been reserved system 00:08: Force enabled HPET at 0x%lx Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: Force enabled HPET at 0x%lx [io 0x0010-0x001f] pnp 00:09: Force enabled HPET at 0x%lx [io 0x0022-0x003f] pnp 00:09: Force enabled HPET at 0x%lx [io 0x0044-0x005f] pnp 00:09: Force enabled HPET at 0x%lx [io 0x0062-0x0063] pnp 00:09: Force enabled HPET at 0x%lx [io 0x0065-0x006f] pnp 00:09: Force enabled HPET at 0x%lx [io 0x0072-0x007f] pnp 00:09: Force enabled HPET at 0x%lx [io 0x0080] pnp 00:09: Force enabled HPET at 0x%lx [io 0x0084-0x0086] pnp 00:09: Force enabled HPET at 0x%lx [io 0x0088] pnp 00:09: Force enabled HPET at 0x%lx [io 0x008c-0x008e] pnp 00:09: Force enabled HPET at 0x%lx [io 0x0090-0x009f] pnp 00:09: Force enabled HPET at 0x%lx [io 0x00a2-0x00bf] pnp 00:09: Force enabled HPET at 0x%lx [io 0x00e0-0x00ef] pnp 00:09: Force enabled HPET at 0x%lx [io 0x04d0-0x04d1] system 00:09: 0[io 0x04d0-0x04d1] has been reserved system 00:09: Force enabled HPET at 0x%lx Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0a: Force enabled HPET at 0x%lx [io 0x00f0-0x00ff] pnp 00:0a: Force enabled HPET at 0x%lx [irq 13] pnp 00:0a: Force enabled HPET at 0x%lx Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:0b: Force enabled HPET at 0x%lx [io 0x0060] pnp 00:0b: Force enabled HPET at 0x%lx [io 0x0064] pnp 00:0b: Force enabled HPET at 0x%lx [irq 1] pnp 00:0b: Force enabled HPET at 0x%lx Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:0c: Force enabled HPET at 0x%lx [irq 12] pnp 00:0c: Force enabled HPET at 0x%lx Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) pnp 00:0d: Force enabled HPET at 0x%lx [mem 0xfed1c000-0xfed1ffff] pnp 00:0d: Force enabled HPET at 0x%lx [mem 0xfed10000-0xfed17fff] pnp 00:0d: Force enabled HPET at 0x%lx [mem 0xfed18000-0xfed18fff] pnp 00:0d: Force enabled HPET at 0x%lx [mem 0xfed19000-0xfed19fff] pnp 00:0d: Force enabled HPET at 0x%lx [mem 0xf8000000-0xfbffffff] pnp 00:0d: Force enabled HPET at 0x%lx [mem 0xfed20000-0xfed3ffff] pnp 00:0d: Force enabled HPET at 0x%lx [mem 0xfed90000-0xfed93fff] pnp 00:0d: Force enabled HPET at 0x%lx [mem 0xfed45000-0xfed8ffff] pnp 00:0d: Force enabled HPET at 0x%lx [mem 0xff000000-0xffffffff] pnp 00:0d: Force enabled HPET at 0x%lx [mem 0xfee00000-0xfeefffff] pnp 00:0d: Force enabled HPET at 0x%lx [mem 0xf0100000-0xf0100fff] system 00:0d: 0[mem 0xfed1c000-0xfed1ffff] has been reserved system 00:0d: 0[mem 0xfed10000-0xfed17fff] has been reserved system 00:0d: 0[mem 0xfed18000-0xfed18fff] has been reserved system 00:0d: 0[mem 0xfed19000-0xfed19fff] has been reserved system 00:0d: 0[mem 0xf8000000-0xfbffffff] has been reserved system 00:0d: 0[mem 0xfed20000-0xfed3ffff] has been reserved system 00:0d: 0[mem 0xfed90000-0xfed93fff] has been reserved system 00:0d: 0[mem 0xfed45000-0xfed8ffff] has been reserved system 00:0d: 0[mem 0xff000000-0xffffffff] has been reserved system 00:0d: 0[mem 0xfee00000-0xfeefffff] could not be reserved system 00:0d: 0[mem 0xf0100000-0xf0100fff] has been reserved system 00:0d: Force enabled HPET at 0x%lx Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered pci 0000:00:01.0: 0PCI bridge to [bus 01] pci 0000:00:01.0: 0 bridge window [io 0xe000-0xefff] pci 0000:00:01.0: 0 bridge window [mem 0xf7e00000-0xf7efffff] pci 0000:00:01.0: 0 bridge window [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:1c.0: 0PCI bridge to [bus 02] pci 0000:03:00.0: 0PCI bridge to [bus 04] pci 0000:00:1c.4: 0PCI bridge to [bus 03-04] pci 0000:00:1c.5: 0PCI bridge to [bus 05] pci 0000:00:1c.5: 0 bridge window [io 0xd000-0xdfff] pci 0000:00:1c.5: 0 bridge window [mem 0xf7d00000-0xf7dfffff] pci 0000:00:1c.6: 0PCI bridge to [bus 06] pci 0000:00:1c.6: 0 bridge window [io 0xc000-0xcfff] pci 0000:00:1c.6: 0 bridge window [mem 0xf0000000-0xf00fffff 64bit pref] pci 0000:00:1c.7: 0PCI bridge to [bus 07] pci 0000:00:1c.7: 0 bridge window [mem 0xf7c00000-0xf7cfffff] pci 0000:03:00.0: Force enabled HPET at 0x%lx setting latency timer to 64 pci_bus 0000:00: Force enabled HPET at 0x%lx resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: Force enabled HPET at 0x%lx resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: Force enabled HPET at 0x%lx resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: Force enabled HPET at 0x%lx resource 7 [mem 0x000d0000-0x000d3fff] pci_bus 0000:00: Force enabled HPET at 0x%lx resource 8 [mem 0x000d4000-0x000d7fff] pci_bus 0000:00: Force enabled HPET at 0x%lx resource 9 [mem 0x000d8000-0x000dbfff] pci_bus 0000:00: Force enabled HPET at 0x%lx resource 10 [mem 0x000dc000-0x000dffff] pci_bus 0000:00: Force enabled HPET at 0x%lx resource 11 [mem 0x000e0000-0x000e3fff] pci_bus 0000:00: Force enabled HPET at 0x%lx resource 12 [mem 0x000e4000-0x000e7fff] pci_bus 0000:00: Force enabled HPET at 0x%lx resource 13 [mem 0xe0000000-0xfeafffff] pci_bus 0000:01: Force enabled HPET at 0x%lx resource 0 [io 0xe000-0xefff] pci_bus 0000:01: Force enabled HPET at 0x%lx resource 1 [mem 0xf7e00000-0xf7efffff] pci_bus 0000:01: Force enabled HPET at 0x%lx resource 2 [mem 0xe0000000-0xefffffff 64bit pref] pci_bus 0000:03: Force enabled HPET at 0x%lx resource 4 [io 0x0000-0x0cf7] pci_bus 0000:03: Force enabled HPET at 0x%lx resource 5 [io 0x0d00-0xffff] pci_bus 0000:03: Force enabled HPET at 0x%lx resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:03: Force enabled HPET at 0x%lx resource 7 [mem 0x000d0000-0x000d3fff] pci_bus 0000:03: Force enabled HPET at 0x%lx resource 8 [mem 0x000d4000-0x000d7fff] pci_bus 0000:03: Force enabled HPET at 0x%lx resource 9 [mem 0x000d8000-0x000dbfff] pci_bus 0000:03: Force enabled HPET at 0x%lx resource 10 [mem 0x000dc000-0x000dffff] pci_bus 0000:03: Force enabled HPET at 0x%lx resource 11 [mem 0x000e0000-0x000e3fff] pci_bus 0000:03: Force enabled HPET at 0x%lx resource 12 [mem 0x000e4000-0x000e7fff] pci_bus 0000:03: Force enabled HPET at 0x%lx resource 13 [mem 0xe0000000-0xfeafffff] pci_bus 0000:04: Force enabled HPET at 0x%lx resource 8 [io 0x0000-0x0cf7] pci_bus 0000:04: Force enabled HPET at 0x%lx resource 9 [io 0x0d00-0xffff] pci_bus 0000:04: Force enabled HPET at 0x%lx resource 10 [mem 0x000a0000-0x000bffff] pci_bus 0000:04: Force enabled HPET at 0x%lx resource 11 [mem 0x000d0000-0x000d3fff] pci_bus 0000:04: Force enabled HPET at 0x%lx resource 12 [mem 0x000d4000-0x000d7fff] pci_bus 0000:04: Force enabled HPET at 0x%lx resource 13 [mem 0x000d8000-0x000dbfff] pci_bus 0000:04: Force enabled HPET at 0x%lx resource 14 [mem 0x000dc000-0x000dffff] pci_bus 0000:04: Force enabled HPET at 0x%lx resource 15 [mem 0x000e0000-0x000e3fff] pci_bus 0000:04: Force enabled HPET at 0x%lx resource 16 [mem 0x000e4000-0x000e7fff] pci_bus 0000:04: Force enabled HPET at 0x%lx resource 17 [mem 0xe0000000-0xfeafffff] pci_bus 0000:05: Force enabled HPET at 0x%lx resource 0 [io 0xd000-0xdfff] pci_bus 0000:05: Force enabled HPET at 0x%lx resource 1 [mem 0xf7d00000-0xf7dfffff] pci_bus 0000:06: Force enabled HPET at 0x%lx resource 0 [io 0xc000-0xcfff] pci_bus 0000:06: Force enabled HPET at 0x%lx resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] pci_bus 0000:07: Force enabled HPET at 0x%lx resource 1 [mem 0xf7c00000-0xf7cfffff] NET: Registered protocol family 2 TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP: reno registered UDP hash table entries: 4096 (order: 5, 131072 bytes) UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Force enabled HPET at 0x%lx Boot video device PCI: CLS 64 bytes, default 64 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) software IO TLB [mem 0xdab91000-0xdeb90fff] (64MB) mapped at [ffff8800dab91000-ffff8800deb90fff] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x26 microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x26 microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x26 microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x26 microcode: Microcode Update Driver: v2.00 , Peter Oruba Scanning for low memory corruption every 60 seconds sha1_ssse3: Using AVX optimized SHA-1 implementation audit: initializing netlink socket (disabled) type=2000 audit(1345653491.376:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages NTFS driver 2.1.30 [Flags: R/O]. msgmni has been set to 15913 NET: Registered protocol family 38 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:01.0: Force enabled HPET at 0x%lx irq 40 for MSI/MSI-X intel_idle: MWAIT substates: 0x1120 intel_idle: v0.4 model 0x2A intel_idle: lapic_timer_reliable_states 0xffffffff input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: Fan [FAN0] (off) ACPI: Fan [FAN1] (off) ACPI: Fan [FAN2] (off) ACPI: Fan [FAN3] (off) ACPI: Fan [FAN4] (off) ACPI: Requesting acpi_cpufreq thermal LNXTHERM:00: 0registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (28 C) thermal LNXTHERM:01: 0registered as thermal_zone1 ACPI: Thermal Zone [TZ01] (30 C) GHES: HEST is not enabled! Linux agpgart interface v0.103 loop: module loaded ahci 0000:00:1f.2: Force enabled HPET at 0x%lx version 3.0 ahci 0000:00:1f.2: Force enabled HPET at 0x%lx irq 41 for MSI/MSI-X ahci 0000:00:1f.2: 0AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode ahci 0000:00:1f.2: 0flags: 64bit ncq pm led clo pio slum part ems apst ahci 0000:00:1f.2: Force enabled HPET at 0x%lx setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 41 ata2: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06180 irq 41 ata3: DUMMY ata4: DUMMY ata5: DUMMY ata6: DUMMY i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:06: 0RTC can wake from S4 rtc_cmos 00:06: 0rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver usbhid usbhid: USB HID core driver IPv4 over IPv4 tunneling driver TCP: cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 rtc_cmos 00:06: 0setting system clock to 2012-08-22 16:38:12 UTC (1345653492) input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359) ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88021506c258), AE_NOT_FOUND (20120711/psparse-536) ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359) ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88021506c2d0), AE_NOT_FOUND (20120711/psparse-536) ata2.00: ATAPI: Optiarc DVD RW AD-7261S, 1.03, max UDMA/100 ata1.00: HPA detected: current 490232639, native 490234752 ata1.00: ATA-7: Maxtor 6L250S0, BANC1G10, max UDMA/133 ata1.00: 490232639 sectors, multi 0: LBA48 NCQ (not used) ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359) ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88021506c2d0), AE_NOT_FOUND (20120711/psparse-536) ata2.00: configured for UDMA/100 ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359) ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88021506c258), AE_NOT_FOUND (20120711/psparse-536) ata1.00: configured for UDMA/133 scsi 0:0:0:0: bad extra_isize (%u != %u)Direct-Access ATA Maxtor 6L250S0 BANC PQ: 0 ANSI: 5 sd 0:0:0:0: bad extra_isize (%u != %u)[sda] 490232639 512-byte logical blocks: (250 GB/233 GiB) sd 0:0:0:0: bad extra_isize (%u != %u)[sda] Write Protect is off sd 0:0:0:0: Force enabled HPET at 0x%lx [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: bad extra_isize (%u != %u)[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 1:0:0:0: bad extra_isize (%u != %u)CD-ROM Optiarc DVD RW AD-7261S 1.03 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Force enabled HPET at 0x%lx Attached scsi CD-ROM sr0 ACPI: Invalid Power Resource to register! ACPI: Invalid Power Resource to register!<6> sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: bad extra_isize (%u != %u)[sda] Attached SCSI disk input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3 REISERFS (device sda2): found reiserfs format "3.6" with standard journal REISERFS (device sda2): using ordered data mode reiserfs: using flush barriers REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda2): checking transaction log (sda2) REISERFS (device sda2): Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly on device 8:2. devtmpfs: mounted Freeing unused kernel memory: 488k freed Write protecting the kernel read-only data: 8192k Freeing unused kernel memory: 1560k freed Freeing unused kernel memory: 680k freed tsc: Refined TSC clocksource calibration: 3311.144 MHz Switching to clocksource tsc systemd-udevd[1012]: starting version 188 wmi: Mapper loaded ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.0: Force enabled HPET at 0x%lx setting latency timer to 64 ehci_hcd 0000:00:1a.0: 0EHCI Host Controller ehci_hcd 0000:00:1a.0: 0new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: 0debug port 2 ehci_hcd 0000:00:1a.0: Force enabled HPET at 0x%lx cache line size of 64 is not supported ehci_hcd 0000:00:1a.0: 0irq 23, io mem 0xf7f08000 ehci_hcd 0000:00:1a.0: 0USB 2.0 started, EHCI 1.00 usb usb1: 0New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: 0New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: 0Product: EHCI Host Controller usb usb1: 0Manufacturer: Linux 3.6.0-rc2-00124-g6dab7ed ehci_hcd usb usb1: 0SerialNumber: 0000:00:1a.0 hub 1-0:1.0: 0USB hub found hub 1-0:1.0: 02 ports detected ehci_hcd 0000:00:1d.0: Force enabled HPET at 0x%lx setting latency timer to 64 ehci_hcd 0000:00:1d.0: 0EHCI Host Controller ehci_hcd 0000:00:1d.0: 0new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: 0debug port 2 ehci_hcd 0000:00:1d.0: Force enabled HPET at 0x%lx cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: 0irq 23, io mem 0xf7f07000 ehci_hcd 0000:00:1d.0: 0USB 2.0 started, EHCI 1.00 usb usb2: 0New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: 0New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: 0Product: EHCI Host Controller usb usb2: 0Manufacturer: Linux 3.6.0-rc2-00124-g6dab7ed ehci_hcd usb usb2: 0SerialNumber: 0000:00:1d.0 hub 2-0:1.0: 0USB hub found hub 2-0:1.0: 02 ports detected ACPI Warning: 0x000000000000f000-0x000000000000f01f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver xhci_hcd 0000:07:00.0: 0xHCI Host Controller xhci_hcd 0000:07:00.0: 0new USB bus registered, assigned bus number 3 xhci_hcd 0000:07:00.0: 0irq 19, io mem 0xf7c00000 xhci_hcd 0000:07:00.0: Force enabled HPET at 0x%lx irq 42 for MSI/MSI-X xhci_hcd 0000:07:00.0: Force enabled HPET at 0x%lx irq 43 for MSI/MSI-X xhci_hcd 0000:07:00.0: Force enabled HPET at 0x%lx irq 44 for MSI/MSI-X xhci_hcd 0000:07:00.0: Force enabled HPET at 0x%lx irq 45 for MSI/MSI-X xhci_hcd 0000:07:00.0: Force enabled HPET at 0x%lx irq 46 for MSI/MSI-X usb usb3: 0New USB device found, idVendor=1d6b, idProduct=0002 usb usb3: 0New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: 0Product: xHCI Host Controller usb usb3: 0Manufacturer: Linux 3.6.0-rc2-00124-g6dab7ed xhci_hcd usb usb3: 0SerialNumber: 0000:07:00.0 xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 3-0:1.0: 0USB hub found hub 3-0:1.0: 02 ports detected xhci_hcd 0000:07:00.0: 0xHCI Host Controller xhci_hcd 0000:07:00.0: 0new USB bus registered, assigned bus number 4 usb usb4: 0New USB device found, idVendor=1d6b, idProduct=0003 usb usb4: 0New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: 0Product: xHCI Host Controller usb usb4: 0Manufacturer: Linux 3.6.0-rc2-00124-g6dab7ed xhci_hcd usb usb4: 0SerialNumber: 0000:07:00.0 xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 4-0:1.0: 0USB hub found hub 4-0:1.0: 02 ports detected usb 1-1: 0new high-speed USB device number 2 using ehci_hcd usb 1-1: 0New USB device found, idVendor=8087, idProduct=0024 usb 1-1: 0New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-1:1.0: 0USB hub found hub 1-1:1.0: 06 ports detected [drm] Initialized drm 1.1.0 20060810 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:06:00.0: Force enabled HPET at 0x%lx irq 47 for MSI/MSI-X r8169 0000:06:00.0: 0eth0: RTL8168e/8111e at 0xffffc90005772000, bc:ae:c5:e1:e8:c6, XID 0c200000 IRQ 47 r8169 0000:06:00.0: 0eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] usb 2-1: 0new high-speed USB device number 2 using ehci_hcd coretemp coretemp.0: Adding Core %u failed TjMax is 98 degrees C coretemp coretemp.0: Adding Core %u failed TjMax is 98 degrees C coretemp coretemp.0: Adding Core %u failed TjMax is 98 degrees C coretemp coretemp.0: Adding Core %u failed TjMax is 98 degrees C coretemp coretemp.0: Adding Core %u failed TjMax is 98 degrees C snd_hda_intel 0000:00:1b.0: Force enabled HPET at 0x%lx irq 48 for MSI/MSI-X usb 2-1: 0New USB device found, idVendor=8087, idProduct=0024 usb 2-1: 0New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 2-1:1.0: 0USB hub found hub 2-1:1.0: 08 ports detected usb 1-1.1: 0new high-speed USB device number 3 using ehci_hcd input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 snd_hda_intel 0000:01:00.1: Force enabled HPET at 0x%lx irq 49 for MSI/MSI-X usb 1-1.1: 0New USB device found, idVendor=0421, idProduct=03d1 usb 1-1.1: 0New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.1: 0Product: Nokia N950 usb 1-1.1: 0Manufacturer: Nokia usb 1-1.1: 0SerialNumber: 357881040022644 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68BE 0x1458:0x21E9). [drm] register mmio base: 0xF7E20000 [drm] register mmio size: 131072 ATOM BIOS: GV radeon 0000:01:00.0: 0VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) radeon 0000:01:00.0: 0GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [drm] Detected VRAM RAM=1024M, BAR=256M [drm] RAM width 128bits DDR [TTM] Zone kernel: Available graphics memory: 4075184 kiB [TTM] Zone dma32: Available graphics memory: 2097152 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator [drm] radeon: 1024M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. radeon 0000:01:00.0: Force enabled HPET at 0x%lx irq 50 for MSI/MSI-X radeon 0000:01:00.0: 0radeon: using MSI. [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] probing gen 2 caps for device 8086:101 = 2/0 [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [drm] Loading JUNIPER Microcode [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). radeon 0000:01:00.0: 0WB enabled radeon 0000:01:00.0: 0fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8802128cfc00 [drm] ring test on 0 succeeded in 1 usecs [drm] ib test on ring 0 succeeded in 0 usecs [drm] Radeon Display Connectors [drm] Connector 0: [drm] HDMI-A-1 [drm] HPD5 [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY2 [drm] Connector 1: [drm] DVI-D-1 [drm] HPD1 [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [drm] Encoders: [drm] DFP2: INTERNAL_UNIPHY1 [drm] Connector 2: [drm] DVI-I-1 [drm] HPD6 [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [drm] Encoders: [drm] DFP3: INTERNAL_UNIPHY [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] Connector 3: [drm] VGA-1 [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [drm] Encoders: [drm] CRT2: INTERNAL_KLDSCP_DAC2 [drm] Internal thermal controller with fan control [drm] radeon: power management initialized usb 2-1.5: 0new high-speed USB device number 3 using ehci_hcd [drm] fb mappable at 0xE0142000 [drm] vram apper at 0xE0000000 [drm] size 9216000 [drm] fb depth is 24 [drm] pitch is 7680 fbcon: radeondrmfb (fb0) is primary device usb 2-1.5: 0New USB device found, idVendor=03f0, idProduct=1812 usb 2-1.5: 0New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1.5: 0Product: Officejet Pro K550 usb 2-1.5: 0Manufacturer: HP usb 2-1.5: 0SerialNumber: MY5C2210WY usb 2-1.6: 0new high-speed USB device number 4 using ehci_hcd usb 2-1.6: 0New USB device found, idVendor=1058, idProduct=1100 usb 2-1.6: 0New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1.6: 0Product: My Book usb 2-1.6: 0Manufacturer: Western Digital usb 2-1.6: 0SerialNumber: 57442D574341553434363633333536 Console: switching to colour frame buffer device 240x75 fb0: radeondrmfb frame buffer device drm: registered panic notifier [drm] Initialized radeon 2.20.0 20080528 for 0000:01:00.0 on minor 0 Initializing USB Mass Storage driver... scsi6 : usb-storage 1-1.1:1.0 scsi7 : usb-storage 2-1.6:1.0 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. scsi 6:0:0:0: bad extra_isize (%u != %u)Direct-Access Nokia Nokia N950 0316 PQ: 0 ANSI: 2 scsi 7:0:0:0: bad extra_isize (%u != %u)Direct-Access WD 10EAVS External 1.75 PQ: 0 ANSI: 4 sd 7:0:0:0: bad extra_isize (%u != %u)[sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 7:0:0:0: bad extra_isize (%u != %u)[sdc] Write Protect is off sd 7:0:0:0: Force enabled HPET at 0x%lx [sdc] Mode Sense: 23 00 00 00 sd 7:0:0:0: Allocated[sdc] No Caching mode page present sd 7:0:0:0: Allocated[sdc] Assuming drive cache: write through sd 6:0:0:0: bad extra_isize (%u != %u)[sdb] Attached SCSI removable disk sd 7:0:0:0: Allocated[sdc] No Caching mode page present sd 7:0:0:0: Allocated[sdc] Assuming drive cache: write through reiserfs: enabling write barrier flush mode Adding 1004024k swap on /dev/sda1. Priority:-1 extents:1 across:1004024k REISERFS (device sda3): found reiserfs format "3.6" with standard journal REISERFS (device sda3): using ordered data mode reiserfs: using flush barriers REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda3): checking transaction log (sda3) REISERFS (device sda3): Using r5 hash to sort names EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) sdc: sdc1 sd 7:0:0:0: Allocated[sdc] No Caching mode page present sd 7:0:0:0: Allocated[sdc] Assuming drive cache: write through sd 7:0:0:0: bad extra_isize (%u != %u)[sdc] Attached SCSI disk r8169 0000:06:00.0: 0eth0: link down r8169 0000:06:00.0: 0eth0: link down IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready r8169 0000:06:00.0: 0eth0: link up IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ata1.00: configured for UDMA/133 ata1: EH complete EXT4-fs (sda4): re-mounted. Opts: commit=0 hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. kjournald starting. Commit interval 5 seconds EXT3-fs (sdc1): using internal journal EXT3-fs (sdc1): mounted filesystem with writeback data mode nepomukservices[3233]: segfault at 0 ip 00007f62bc150a65 sp 00007fffd9783040 error 4 in nepomukfilewatch.so[7f62bc13c000+1c000] nepomukservices[3477]: segfault at 0 ip 00007f3aa64b7a65 sp 00007fff862996c0 error 4 in nepomukfilewatch.so[7f3aa64a3000+1c000] nepomukservices[3483]: segfault at 0 ip 00007f2df1259a65 sp 00007fffd00b51a0 error 4 in nepomukfilewatch.so[7f2df1245000+1c000] nepomukservices[3489]: segfault at 0 ip 00007fa04304da65 sp 00007fff46f08ca0 error 4 in nepomukfilewatch.so[7fa043039000+1c000] nepomukservices[3495]: segfault at 0 ip 00007f6fd250ea65 sp 00007fffee269ec0 error 4 in nepomukfilewatch.so[7f6fd24fa000+1c000] nepomukservices[3501]: segfault at 0 ip 00007f13cd918a65 sp 00007fff67b659e0 error 4 in nepomukfilewatch.so[7f13cd904000+1c000] usb 1-1.1: 0USB disconnect, device number 3 usb 1-1.1: 0new high-speed USB device number 4 using ehci_hcd usb 1-1.1: 0New USB device found, idVendor=0421, idProduct=03d1 usb 1-1.1: 0New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.1: 0Product: Nokia N950 usb 1-1.1: 0Manufacturer: Nokia usb 1-1.1: 0SerialNumber: 357881040022644 scsi8 : usb-storage 1-1.1:1.0 scsi 8:0:0:0: bad extra_isize (%u != %u)Direct-Access Nokia Nokia N950 0316 PQ: 0 ANSI: 2 sd 8:0:0:0: bad extra_isize (%u != %u)[sdb] 18463744 512-byte logical blocks: (9.45 GB/8.80 GiB) sd 8:0:0:0: bad extra_isize (%u != %u)[sdb] Write Protect is off sd 8:0:0:0: Force enabled HPET at 0x%lx [sdb] Mode Sense: 0f 00 00 00 sd 8:0:0:0: bad extra_isize (%u != %u)[sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sd 8:0:0:0: bad extra_isize (%u != %u)[sdb] Attached SCSI removable disk usb 1-1.1: 0USB disconnect, device number 4 sd 8:0:0:0: bad extra_isize (%u != %u)[sdb] Synchronizing SCSI cache sd 8:0:0:0: 0[sdb] Result: hostbyte=0x01 driverbyte=0x00 BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [] radeon_ttm_bo_destroy+0x34/0xd0 [radeon] PGD 108522067 PUD 123182067 PMD 0 Oops: 0002 [#1] PREEMPT SMP Modules linked in: asus_atk0110 usb_storage snd_hda_codec_hdmi radeon snd_hda_codec_realtek i2c_algo_bit snd_hda_intel snd_hda_codec snd_pcm coretemp aesni_intel aes_x86_64 r8169 hwmon drm_kms_helper ttm drm aes_generic xhci_hcd i2c_i801 mii ablk_helper cryptd video snd_page_alloc snd_timer snd ehci_hcd wmi CPU 0 Pid: 14945, comm: max-texture-siz Not tainted 3.6.0-rc2-00124-g6dab7ed #1 System manufacturer System Product Name/P8H67 RIP: 0010:[] [] radeon_ttm_bo_destroy+0x34/0xd0 [radeon] RSP: 0018:ffff8800d9fbfb18 EFLAGS: 00010282 RAX: ffff8802059c6800 RBX: ffff8802059c6848 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8802147f6ed8 RBP: ffff8802059c6800 R08: 0000000000000000 R09: ffff88021ec13f40 R10: ffffea00035a0540 R11: ffffffffa00bab18 R12: ffff8802147f6580 R13: ffff8802059c6848 R14: ffff8802059c6848 R15: ffff8802059c6888 FS: 00007f7fcdf95740(0000) GS:ffff88021ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 00000000d6db1000 CR4: 00000000000407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process max-texture-siz (pid: 14945, threadinfo ffff8800d9fbe000, task ffff880215376600) Stack: ffff8802059c688c 0000000000400480 ffff8802147f6580 ffffffffa007481d 0000000000000001 0000000000000001 ffff8802147f65a0 ffff8802147f69a8 ffff8802133f11f8 ffffffffa00758a4 0000000000000296 0000000000000003 Call Trace: [] ? ttm_bo_release_list+0xad/0x100 [ttm] [] ? ttm_bo_release+0x194/0x230 [ttm] [] ? ttm_bo_unref+0x3d/0x60 [ttm] [] ? ttm_bo_init+0x2ac/0x3f0 [ttm] [] ? radeon_bo_create+0x1f4/0x300 [radeon] [] ? radeon_bo_clear_va+0x50/0x50 [radeon] [] ? radeon_gem_object_create+0x64/0x110 [radeon] [] ? radeon_gem_create_ioctl+0x6c/0x120 [radeon] [] ? drm_ioctl+0x40c/0x4c0 [drm] [] ? radeon_gem_pwrite_ioctl+0x30/0x30 [radeon] [] ? do_page_fault+0x182/0x440 [] ? do_vfs_ioctl+0x8f/0x530 [] ? vm_mmap_pgoff+0x73/0xa0 [] ? sys_ioctl+0x49/0x80 [] ? system_call_fastpath+0x16/0x1b Code: 89 fb 48 89 6c 24 08 48 8d 6f b8 4c 89 64 24 10 48 8b bf c8 01 00 00 48 81 c7 d8 0e 00 00 e8 b4 aa 2f e1 48 8b 53 b8 48 8b 43 c0 <48> 89 42 08 48 89 10 48 8b bb c8 01 00 00 48 89 6b b8 48 89 6b RIP [] radeon_ttm_bo_destroy+0x34/0xd0 [radeon] RSP CR2: 0000000000000008 ---[ end trace 61e9627de8e05172 ]---