Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.3.2 (root@rechner3) (gcc version 4.4.5 (Gentoo 4.4.5 p1.3, pie-0.4.5) ) #2 SMP Wed May 23 02:27:36 CEST 2012 Command line: root=/dev/sda4 hept=force BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d000 (usable) BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000009f675000 (usable) BIOS-e820: 000000009f675000 - 000000009f6bf000 (reserved) BIOS-e820: 000000009f6bf000 - 000000009f74c000 (usable) BIOS-e820: 000000009f74c000 - 000000009f7bf000 (ACPI NVS) BIOS-e820: 000000009f7bf000 - 000000009f7e3000 (usable) BIOS-e820: 000000009f7e3000 - 000000009f7ff000 (ACPI data) BIOS-e820: 000000009f7ff000 - 000000009f800000 (usable) BIOS-e820: 000000009f800000 - 00000000a0000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000158000000 (usable) NX (Execute Disable) protection: active DMI 2.6 present. DMI: Acer Aspire 5745DG/ZR7D, BIOS V1.00 07/30/2010 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x158000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-EFFFF write-through F0000-FFFFF write-combining MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 0FFE00000 mask FFFE00000 write-protect 2 base 080000000 mask FE0000000 write-back 3 base 09F800000 mask FFF800000 uncachable 4 base 100000000 mask F80000000 write-back 5 base 158000000 mask FF8000000 uncachable 6 base 160000000 mask FE0000000 uncachable 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0x9f800 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff88000009b000] 9b000 size 8192 init_memory_mapping: 0000000000000000-000000009f800000 0000000000 - 009f800000 page 2M kernel direct mapping tables up to 9f800000 @ 1fffc000-20000000 init_memory_mapping: 0000000100000000-0000000158000000 0100000000 - 0158000000 page 2M kernel direct mapping tables up to 158000000 @ 9f7dc000-9f7e3000 ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS) ACPI: XSDT 000000009f7fe120 00074 (v01 ACRSYS ACRPRDCT 00000001 01000013) ACPI: FACP 000000009f7fc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013) ACPI: DSDT 000000009f7ed000 0B32D (v02 ACRSYS ACRPRDCT 00000001 1025 01000013) ACPI: FACS 000000009f75f000 00040 ACPI: ASF! 000000009f7fd000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013) ACPI: HPET 000000009f7fb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) ACPI: APIC 000000009f7fa000 0008C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013) ACPI: MCFG 000000009f7f9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) ACPI: SLIC 000000009f7ec000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) ACPI: BOOT 000000009f7e9000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) ACPI: ASPT 000000009f7e5000 00034 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013) ACPI: WDAT 000000009f7e4000 00224 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) ACPI: SSDT 000000009f7e3000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea00055fffff] PMD -> [ffff880153800000-ffff8801575fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00158000 Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x0000009d 0: 0x00000100 -> 0x0009f675 0: 0x0009f6bf -> 0x0009f74c 0: 0x0009f7bf -> 0x0009f7e3 0: 0x0009f7ff -> 0x0009f800 0: 0x00100000 -> 0x00158000 On node 0 totalpages: 1013428 DMA zone: 64 pages used for memmap DMA zone: 2 pages reserved DMA zone: 3915 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 632679 pages, LIFO batch:31 Normal zone: 5632 pages used for memmap Normal zone: 354816 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 Allocating PCI resources starting at a0000000 (gap: a0000000:50000000) setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 26 pages/cpu @ffff880157c00000 s75520 r8192 d22784 u524288 pcpu-alloc: s75520 r8192 d22784 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 991410 Kernel command line: root=/dev/sda4 hept=force PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 3907348k/5636096k available (4887k kernel code, 1582384k absent, 146364k reserved, 3807k data, 524k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:712 16 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 2527.291 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.58 BogoMIPS (lpj=2527291) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 256 Initializing cgroup subsys cpuacct Initializing cgroup subsys freezer CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 9 MCE banks CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. Freeing SMP alternatives: 20k freed ACPI: Core revision 20120111 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz stepping 05 Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver. CPUID marked event: 'bus cycles' unavailable ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f Booting Node 0, Processors #1 smpboot cpu 1: start_ip = 9b000 #2 smpboot cpu 2: start_ip = 9b000 #3 Ok. smpboot cpu 3: start_ip = 9b000 Brought up 4 CPUs Total of 4 processors activated (20218.32 BogoMIPS). print_constraints: dummy: NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 000000009f691918 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: SSDT 000000009f68f018 008E0 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 008E0 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) ACPI: SSDT 000000009f690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117) ACPI: SSDT 000000009f68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117) ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 8 1f ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfeafffff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600 pci 0000:00:01.0: [8086:0045] type 1 class 0x000604 pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780 pci 0000:00:16.0: reg 10: [mem 0xb7106100-0xb710610f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03 pci 0000:00:1a.0: reg 10: [mem 0xb7105c00-0xb7105fff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403 pci 0000:00:1b.0: reg 10: [mem 0xb7100000-0xb7103fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604 pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03 pci 0000:00:1d.0: reg 10: [mem 0xb7105800-0xb7105bff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601 pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106 pci 0000:00:1f.2: reg 10: [io 0x4048-0x404f] pci 0000:00:1f.2: reg 14: [io 0x4054-0x4057] pci 0000:00:1f.2: reg 18: [io 0x4040-0x4047] pci 0000:00:1f.2: reg 1c: [io 0x4050-0x4053] pci 0000:00:1f.2: reg 20: [io 0x4020-0x403f] pci 0000:00:1f.2: reg 24: [mem 0xb7105000-0xb71057ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05 pci 0000:00:1f.3: reg 10: [mem 0xb7106000-0xb71060ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180 pci 0000:00:1f.6: reg 10: [mem 0xb7104000-0xb7104fff 64bit] pci 0000:01:00.0: [10de:0df0] type 0 class 0x000300 pci 0000:01:00.0: reg 10: [mem 0xb2000000-0xb2ffffff] pci 0000:01:00.0: reg 14: [mem 0xa0000000-0xafffffff 64bit pref] pci 0000:01:00.0: reg 1c: [mem 0xb0000000-0xb1ffffff 64bit pref] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref] pci 0000:01:00.1: [10de:0bea] type 0 class 0x000403 pci 0000:01:00.1: reg 10: [mem 0xb3000000-0xb3003fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] pci 0000:00:01.0: bridge window [mem 0xb2000000-0xb30fffff] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref] pci 0000:02:00.0: [1969:1073] type 0 class 0x000200 pci 0000:02:00.0: reg 10: [mem 0xb6100000-0xb613ffff 64bit] pci 0000:02:00.0: reg 18: [io 0x2000-0x207f] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xb6100000-0xb70fffff] pci 0000:00:1c.0: bridge window [mem 0xb3100000-0xb40fffff 64bit pref] pci 0000:03:00.0: [14e4:4357] type 0 class 0x000280 pci 0000:03:00.0: reg 10: [mem 0xb5100000-0xb5103fff 64bit] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PCI bridge to [bus 03-03] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.5: bridge window [mem 0xb5100000-0xb60fffff] pci 0000:00:1c.5: bridge window [mem 0xb4100000-0xb50fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 1e 1f pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f]) PCI: root bus 3f: using default resources PCI host bridge to bus 0000:3f pci_bus 0000:3f: root bus resource [io 0x0000-0xffff] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff] pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600 pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600 pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600 pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600 pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600 pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600 pci_bus 0000:3f: on NUMA node 0 pci0000:3f: Unable to request _OSC control (_OSC support mask: 0x1e) ACPI: PCI Interrupt Link [LNKA] (IRQs 1 *3 4 5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:00.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.24. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009d000 - 000000000009ffff reserve RAM buffer: 000000009f675000 - 000000009fffffff reserve RAM buffer: 000000009f74c000 - 000000009fffffff reserve RAM buffer: 000000009f7e3000 - 000000009fffffff reserve RAM buffer: 000000009f800000 - 000000009fffffff cfg80211: Calling CRDA to update world regulatory domain NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-3e] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000c0000-0x000c3fff window] pnp 00:00: [mem 0x000c4000-0x000c7fff window] pnp 00:00: [mem 0x000c8000-0x000cbfff window] pnp 00:00: [mem 0x000cc000-0x000cffff window] pnp 00:00: [mem 0x000d0000-0x000d3fff window] pnp 00:00: [mem 0x000d4000-0x000d7fff window] pnp 00:00: [mem 0x000d8000-0x000dbfff window] pnp 00:00: [mem 0x000dc000-0x000dffff window] pnp 00:00: [mem 0x000e0000-0x000e3fff window] pnp 00:00: [mem 0x000e4000-0x000e7fff window] pnp 00:00: [mem 0x000e8000-0x000ebfff window] pnp 00:00: [mem 0x000ec000-0x000effff window] pnp 00:00: [mem 0x000f0000-0x000fffff window] pnp 00:00: [mem 0xa0000000-0xfeafffff window] pnp 00:00: [mem 0xfed40000-0xfed44fff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [io 0x0000-0x001f] pnp 00:01: [io 0x0081-0x0091] pnp 00:01: [io 0x0093-0x009f] pnp 00:01: [io 0x00c0-0x00df] pnp 00:01: [dma 4] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: [mem 0xff000000-0xffffffff] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) pnp 00:03: [mem 0xfed00000-0xfed003ff] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:04: [io 0x00f0] pnp 00:04: [irq 13] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:05: [io 0x002e-0x002f] pnp 00:05: [io 0x004e-0x004f] pnp 00:05: [io 0x0061] pnp 00:05: [io 0x0063] pnp 00:05: [io 0x0065] pnp 00:05: [io 0x0067] pnp 00:05: [io 0x0070] pnp 00:05: [io 0x0080] pnp 00:05: [io 0x0092] pnp 00:05: [io 0x00b2-0x00b3] pnp 00:05: [io 0x0680-0x069f] pnp 00:05: [io 0x0800-0x080f] pnp 00:05: [io 0xffff] pnp 00:05: [io 0xffff] pnp 00:05: [io 0x0400-0x047f] pnp 00:05: [io 0x0500-0x057f] pnp 00:05: [io 0x164e-0x164f] pnp 00:05: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.5 BAR 13 [io 0x1000-0x1fff] system 00:05: [io 0x0680-0x069f] has been reserved system 00:05: [io 0x0800-0x080f] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0x0400-0x047f] has been reserved system 00:05: [io 0x0500-0x057f] has been reserved system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:06: [io 0x0070-0x0077] pnp 00:06: [irq 8] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: [io 0x0060] pnp 00:07: [io 0x0064] pnp 00:07: [irq 1] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:08: [irq 12] pnp 00:08: Plug and Play ACPI device, IDs SYN1b20 SYN1b00 SYN0002 PNP0f13 (active) pnp 00:09: [mem 0xfed1c000-0xfed1ffff] pnp 00:09: [mem 0xfed10000-0xfed13fff] pnp 00:09: [mem 0xfed18000-0xfed18fff] pnp 00:09: [mem 0xfed19000-0xfed19fff] pnp 00:09: [mem 0xf0000000-0xf3ffffff] pnp 00:09: [mem 0xfed20000-0xfed3ffff] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled] pnp 00:09: [mem 0xfed45000-0xfed8ffff] pnp 00:09: [mem 0xff000000-0xffffffff] pnp 00:09: [mem 0xfee00000-0xfeefffff] pnp 00:09: [mem 0xb7200000-0xb7200fff] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:09: [mem 0xff000000-0xffffffff] could not be reserved system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved system 00:09: [mem 0xb7200000-0xb7200fff] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0a: [bus 3f] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active) pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] PCI: max bus depth: 1 pci_try_num: 2 pci 0000:01:00.0: BAR 6: assigned [mem 0xb3080000-0xb30fffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] pci 0000:00:01.0: bridge window [mem 0xb2000000-0xb30fffff] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xb6100000-0xb70fffff] pci 0000:00:1c.0: bridge window [mem 0xb3100000-0xb40fffff 64bit pref] pci 0000:00:1c.5: PCI bridge to [bus 03-03] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.5: bridge window [mem 0xb5100000-0xb60fffff] pci 0000:00:1c.5: bridge window [mem 0xb4100000-0xb50fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 04-04] pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] pci_bus 0000:01: resource 1 [mem 0xb2000000-0xb30fffff] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] pci_bus 0000:02: resource 1 [mem 0xb6100000-0xb70fffff] pci_bus 0000:02: resource 2 [mem 0xb3100000-0xb40fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] pci_bus 0000:03: resource 1 [mem 0xb5100000-0xb60fffff] pci_bus 0000:03: resource 2 [mem 0xb4100000-0xb50fffff 64bit pref] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS 64 bytes, default 64 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff88009b675000 - ffff88009f675000 software IO TLB at phys 0x9b675000 - 0x9f675000 Simple Boot Flag at 0x44 set to 0x1 microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2 microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2 microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2 microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2 microcode: Microcode Update Driver: v2.00 , Peter Oruba audit: initializing netlink socket (disabled) type=2000 audit(1337734338.228:1): initialized NTFS driver 2.1.30 [Flags: R/W]. msgmni has been set to 7631 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) ALI M7101 PMU not found. i2c-core: driver [adp8860_bl] using legacy suspend method i2c-core: driver [adp8860_bl] using legacy resume method i2c-core: driver [adp8870_bl] using legacy suspend method i2c-core: driver [adp8870_bl] using legacy resume method intel_idle: MWAIT substates: 0x1120 intel_idle: v0.4 model 0x25 intel_idle: lapic_timer_reliable_states 0xffffffff ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: AC Adapter [ACAD] (on-line) input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID0] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS acpi device:0c: registered as cooling_device0 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input4 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (56 C) Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: Battery Slot [BAT1] (battery present) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: irq 40 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m2048@0xb7105000 port 0xb7105100 irq 40 ata2: SATA max UDMA/133 abar m2048@0xb7105000 port 0xb7105180 irq 40 ata3: DUMMY ata4: DUMMY Broadcom 43xx driver loaded [ Features: PNL ] Broadcom 43xx-legacy driver loaded [ Features: PLID ] Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs ACPI Warning: 0x0000000000004000-0x000000000000401f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120111/utaddress-251) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver cpuidle: using governor ladder cpuidle: using governor menu leds_ss4200: no LED devices found EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver usbhid usbhid: USB HID core driver input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X hda_intel: Disabling MSI ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: Hitachi HTS545050B9A300, PB4OC60F, max UDMA/133 ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 PB4O PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ALSA device list: #0: HDA Intel at 0xb7100000 irq 41 #1: HDA NVidia at 0xb3000000 irq 17 Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk Refined TSC clocksource calibration: 2527.437 MHz. Switching to clocksource tsc ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: HL-DT-STDVDRAM GT31N, 1.00, max UDMA/100 ata2.00: configured for UDMA/100 scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT31N 1.00 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6 kjournald starting. Commit interval 5 seconds EXT3-fs (sda4): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:4. Freeing unused kernel memory: 524k freed Write protecting the kernel read-only data: 8192k Freeing unused kernel memory: 1236k freed Freeing unused kernel memory: 76k freed udevd[977]: starting version 171 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported ehci_hcd 0000:00:1a.0: irq 16, io mem 0xb7105c00 ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.3.2 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: irq 23, io mem 0xb7105800 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 3.3.2 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected usb 1-1: new high-speed USB device number 2 using ehci_hcd usb 1-1: New USB device found, idVendor=8087, idProduct=0020 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected usb 2-1: new high-speed USB device number 2 using ehci_hcd usb 2-1: New USB device found, idVendor=8087, idProduct=0020 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected usb 1-1.1: new high-speed USB device number 3 using ehci_hcd usb 1-1.1: New USB device found, idVendor=0402, idProduct=9665 usb 1-1.1: New USB device strings: Mfr=3, Product=1, SerialNumber=0 usb 1-1.1: Product: 1.3M WebCam usb 1-1.1: Manufacturer: XPA5503D0 usb 1-1.3: new high-speed USB device number 4 using ehci_hcd usb 1-1.3: New USB device found, idVendor=0955, idProduct=7002 usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.3: Product: NVIDIA stereo controller usb 1-1.3: Manufacturer: Copyright (c) 2009 NVIDIA Corporation usb 2-1.2: new low-speed USB device number 3 using ehci_hcd usb 2-1.2: New USB device found, idVendor=046d, idProduct=c03e usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1.2: Product: USB-PS/2 Optical Mouse usb 2-1.2: Manufacturer: Logitech input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input7 generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.2/input0 EXT3-fs (sda4): using internal journal