[ 0.000000] Linux version 3.1.0-rc3+ (marcia@marcia-desktop) (gcc version 4.6.1 (Debian 4.6.1-7) ) #21 Wed Aug 24 15:44:21 BRT 2011 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007bf10000 (usable) [ 0.000000] BIOS-e820: 000000007bf10000 - 000000007bf18000 (ACPI data) [ 0.000000] BIOS-e820: 000000007bf18000 - 000000007bf80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007bf80000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: CLEVO M5X0JE /M5X0JE , BIOS 2005Q2 03/10/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7bf10 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00f8260] f8260 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 12288 [ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037a00000 page 2M [ 0.000000] 0037a00000 - 0037bfe000 page 4k [ 0.000000] kernel direct mapping tables up to 37bfe000 @ 17fb000-1800000 [ 0.000000] RAMDISK: 379fc000 - 37cf6000 [ 0.000000] Allocated new RAMDISK: 37702000 - 379fb5ae [ 0.000000] Move RAMDISK from 00000000379fc000 - 0000000037cf55ad to 37702000 - 379fb5ad [ 0.000000] 1091MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00037bfe [ 0.000000] HighMem 0x00037bfe -> 0x0007bf10 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0007bf10 [ 0.000000] On node 0 totalpages: 507549 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 222502 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2183 pages used for memmap [ 0.000000] HighMem zone: 277131 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: nVIDIA [ 0.000000] MPTABLE: Product ID: C51-MCP51 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] Processors: 1 [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503582 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-rc3+ root=UUID=92b6c2a8-b801-4435-b8b3-f36ad6a17a69 ro acpi=off pnpbios=off noapic [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00037bfe:0007bf10) [ 0.000000] Memory: 2006096k/2030656k available (1836k kernel code, 24100k reserved, 1180k data, 304k init, 1117256k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc12f3000 - 0xc133f000 ( 304 kB) [ 0.000000] .data : 0xc11cb3f5 - 0xc12f26e0 (1180 kB) [ 0.000000] .text : 0xc1000000 - 0xc11cb3f5 (1836 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:288 [ 0.000000] CPU 0 irqstacks, hard=f600e000 soft=f6010000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1807.819 MHz processor. [ 0.006668] Calibrating delay loop (skipped), value calculated using timer frequency.. 3617.28 BogoMIPS (lpj=6026063) [ 0.006799] pid_max: default: 32768 minimum: 301 [ 0.006919] Mount-cache hash table entries: 512 [ 0.007099] mce: CPU supports 5 MCE banks [ 0.007173] using AMD E400 aware idle routine [ 0.007243] CPU: Mobile AMD Sempron(tm) Processor 3400+ stepping 02 [ 0.007445] Performance Events: AMD PMU driver. [ 0.007557] ... version: 0 [ 0.007620] ... bit width: 48 [ 0.007683] ... generic registers: 4 [ 0.007746] ... value mask: 0000ffffffffffff [ 0.007812] ... max period: 00007fffffffffff [ 0.007877] ... fixed-purpose events: 0 [ 0.007940] ... event mask: 000000000000000f [ 0.008163] NMI watchdog enabled, takes one hw-pmu counter. [ 0.008244] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.113427] devtmpfs: initialized [ 0.113584] PM: Registering ACPI NVS region at 7bf18000 (425984 bytes) [ 0.113720] RTC time: 15:54:10, date: 08/24/11 [ 0.113810] NET: Registered protocol family 16 [ 0.113966] node 0 link 0: io port [1000, fffff] [ 0.113971] TOM: 0000000080000000 aka 2048M [ 0.114037] node 0 link 0: mmio [a0000, bffff] [ 0.114040] node 0 link 0: mmio [80000000, dfffffff] [ 0.114044] node 0 link 0: mmio [e0000000, efffffff] [ 0.114047] node 0 link 0: mmio [f0000000, fe0bffff] [ 0.114051] bus: [00, ff] on node 0 link 0 [ 0.114054] bus: 00 index 0 [io 0x0000-0xffff] [ 0.114057] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.114060] bus: 00 index 2 [mem 0x80000000-0xfcffffffff] [ 0.122821] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX. [ 0.122903] PCI: BIOS BUG #81[00000000] found [ 0.122967] PCI: Using configuration type 1 for base access [ 0.123561] bio: create slab at 0 [ 0.123678] ACPI: Interpreter disabled. [ 0.123794] vgaarb: loaded [ 0.123889] PCI: Probing PCI hardware [ 0.123892] PCI: Probing PCI hardware (bus 00) [ 0.123921] pci_bus 0000:00: scanning bus [ 0.123935] pci 0000:00:00.0: [10de:02f3] type 0 class 0x000500 [ 0.123947] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.123974] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x166 [ 0.123995] pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500 [ 0.124000] pci 0000:00:00.1: calling quirk_mmio_always_on+0x0/0x13 [ 0.124025] pci 0000:00:00.1: calling quirk_resource_alignment+0x0/0x166 [ 0.124036] pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500 [ 0.124041] pci 0000:00:00.2: calling quirk_mmio_always_on+0x0/0x13 [ 0.124073] pci 0000:00:00.2: calling quirk_resource_alignment+0x0/0x166 [ 0.124085] pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500 [ 0.124089] pci 0000:00:00.3: calling quirk_mmio_always_on+0x0/0x13 [ 0.124122] pci 0000:00:00.3: calling quirk_resource_alignment+0x0/0x166 [ 0.124133] pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500 [ 0.124138] pci 0000:00:00.4: calling quirk_mmio_always_on+0x0/0x13 [ 0.124170] pci 0000:00:00.4: calling quirk_resource_alignment+0x0/0x166 [ 0.124183] pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500 [ 0.124190] pci 0000:00:00.5: calling quirk_mmio_always_on+0x0/0x13 [ 0.124215] pci 0000:00:00.5: calling quirk_resource_alignment+0x0/0x166 [ 0.124234] pci 0000:00:00.6: [10de:027f] type 0 class 0x000500 [ 0.124238] pci 0000:00:00.6: calling quirk_mmio_always_on+0x0/0x13 [ 0.124264] pci 0000:00:00.6: calling quirk_resource_alignment+0x0/0x166 [ 0.124274] pci 0000:00:00.7: [10de:027e] type 0 class 0x000500 [ 0.124279] pci 0000:00:00.7: calling quirk_mmio_always_on+0x0/0x13 [ 0.124312] pci 0000:00:00.7: calling quirk_resource_alignment+0x0/0x166 [ 0.124328] pci 0000:00:02.0: [10de:02fc] type 1 class 0x000604 [ 0.124332] pci 0000:00:02.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.124347] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x166 [ 0.124361] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.124365] pci 0000:00:02.0: PME# disabled [ 0.124381] pci 0000:00:03.0: [10de:02fd] type 1 class 0x000604 [ 0.124385] pci 0000:00:03.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.124399] pci 0000:00:03.0: calling quirk_resource_alignment+0x0/0x166 [ 0.124412] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.124416] pci 0000:00:03.0: PME# disabled [ 0.124430] pci 0000:00:05.0: [10de:0247] type 0 class 0x000300 [ 0.124437] pci 0000:00:05.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.124444] pci 0000:00:05.0: reg 10: [mem 0xb2000000-0xb2ffffff] [ 0.124451] pci 0000:00:05.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.124458] pci 0000:00:05.0: reg 1c: [mem 0xb1000000-0xb1ffffff 64bit] [ 0.124466] pci 0000:00:05.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.124472] pci 0000:00:05.0: calling quirk_resource_alignment+0x0/0x166 [ 0.124511] pci 0000:00:09.0: [10de:0270] type 0 class 0x000500 [ 0.124529] pci 0000:00:09.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.124645] pci 0000:00:09.0: calling quirk_resource_alignment+0x0/0x166 [ 0.124711] pci 0000:00:0a.0: [10de:0260] type 0 class 0x000601 [ 0.124716] pci 0000:00:0a.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.124767] pci 0000:00:0a.0: calling nvidia_force_enable_hpet+0x0/0x7e [ 0.124770] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.124841] pci 0000:00:0a.0: calling quirk_resource_alignment+0x0/0x166 [ 0.124861] pci 0000:00:0a.1: [10de:0264] type 0 class 0x000c05 [ 0.124872] pci 0000:00:0a.1: calling quirk_mmio_always_on+0x0/0x13 [ 0.124912] pci 0000:00:0a.1: reg 20: [io 0x3040-0x307f] [ 0.124922] pci 0000:00:0a.1: reg 24: [io 0x3000-0x303f] [ 0.124936] pci 0000:00:0a.1: calling quirk_resource_alignment+0x0/0x166 [ 0.124959] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 0.124965] pci 0000:00:0a.1: PME# disabled [ 0.124993] pci 0000:00:0b.0: [10de:026d] type 0 class 0x000c03 [ 0.125001] pci 0000:00:0b.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.125013] pci 0000:00:0b.0: reg 10: [mem 0xb0004000-0xb0004fff] [ 0.125056] pci 0000:00:0b.0: calling quirk_resource_alignment+0x0/0x166 [ 0.125071] pci 0000:00:0b.0: supports D1 D2 [ 0.125074] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.125079] pci 0000:00:0b.0: PME# disabled [ 0.125098] pci 0000:00:0b.1: [10de:026e] type 0 class 0x000c03 [ 0.125107] pci 0000:00:0b.1: calling quirk_mmio_always_on+0x0/0x13 [ 0.125118] pci 0000:00:0b.1: reg 10: [mem 0xb0005000-0xb00050ff] [ 0.125159] pci 0000:00:0b.1: calling quirk_resource_alignment+0x0/0x166 [ 0.125179] pci 0000:00:0b.1: supports D1 D2 [ 0.125182] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.125186] pci 0000:00:0b.1: PME# disabled [ 0.125213] pci 0000:00:0d.0: [10de:0265] type 0 class 0x000101 [ 0.125221] pci 0000:00:0d.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.125253] pci 0000:00:0d.0: reg 20: [io 0x3080-0x308f] [ 0.125273] pci 0000:00:0d.0: calling quirk_resource_alignment+0x0/0x166 [ 0.125303] pci 0000:00:0e.0: [10de:0266] type 0 class 0x000101 [ 0.125314] pci 0000:00:0e.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.125325] pci 0000:00:0e.0: reg 10: [io 0x30b0-0x30b7] [ 0.125334] pci 0000:00:0e.0: reg 14: [io 0x30a4-0x30a7] [ 0.125343] pci 0000:00:0e.0: reg 18: [io 0x30a8-0x30af] [ 0.125352] pci 0000:00:0e.0: reg 1c: [io 0x30a0-0x30a3] [ 0.125361] pci 0000:00:0e.0: reg 20: [io 0x3090-0x309f] [ 0.125370] pci 0000:00:0e.0: reg 24: [mem 0xb0006000-0xb0006fff] [ 0.125384] pci 0000:00:0e.0: calling quirk_resource_alignment+0x0/0x166 [ 0.125424] pci 0000:00:10.0: [10de:026f] type 1 class 0x000604 [ 0.125433] pci 0000:00:10.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.125459] pci 0000:00:10.0: calling quirk_resource_alignment+0x0/0x166 [ 0.125494] pci 0000:00:10.1: [10de:026c] type 0 class 0x000403 [ 0.125506] pci 0000:00:10.1: calling quirk_mmio_always_on+0x0/0x13 [ 0.125517] pci 0000:00:10.1: reg 10: [mem 0xb0000000-0xb0003fff] [ 0.125560] pci 0000:00:10.1: calling quirk_resource_alignment+0x0/0x166 [ 0.125583] pci 0000:00:10.1: PME# supported from D3hot D3cold [ 0.125587] pci 0000:00:10.1: PME# disabled [ 0.125618] pci 0000:00:14.0: [10de:0269] type 0 class 0x000680 [ 0.125626] pci 0000:00:14.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.125637] pci 0000:00:14.0: reg 10: [mem 0xb0007000-0xb0007fff] [ 0.125646] pci 0000:00:14.0: reg 14: [io 0x30b8-0x30bf] [ 0.125681] pci 0000:00:14.0: calling quirk_resource_alignment+0x0/0x166 [ 0.125695] pci 0000:00:14.0: supports D1 D2 [ 0.125698] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.125702] pci 0000:00:14.0: PME# disabled [ 0.125718] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.125722] pci 0000:00:18.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.125733] pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x166 [ 0.125745] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.125749] pci 0000:00:18.1: calling quirk_mmio_always_on+0x0/0x13 [ 0.125761] pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x166 [ 0.125770] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.125774] pci 0000:00:18.2: calling quirk_mmio_always_on+0x0/0x13 [ 0.125785] pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x166 [ 0.125794] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.125798] pci 0000:00:18.3: calling quirk_mmio_always_on+0x0/0x13 [ 0.125809] pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x166 [ 0.125824] pci_bus 0000:00: fixups for bus [ 0.125826] PCI: peer root bus 00 res updated from pci conf [ 0.125833] pci 0000:00:02.0: scanning [bus 01-02] behind bridge, pass 0 [ 0.125854] pci_bus 0000:01: scanning bus [ 0.125858] pci_bus 0000:01: fixups for bus [ 0.125861] pci 0000:00:02.0: PCI bridge to [bus 01-02] [ 0.125929] pci 0000:00:02.0: bridge window [io 0x4000-0x4fff] [ 0.125933] pci 0000:00:02.0: bridge window [mem 0xb3000000-0xb31fffff] [ 0.125937] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.125941] pci_bus 0000:01: bus scan returning with max=01 [ 0.125945] pci 0000:00:03.0: scanning [bus 03-03] behind bridge, pass 0 [ 0.125966] pci_bus 0000:03: scanning bus [ 0.125969] pci_bus 0000:03: fixups for bus [ 0.125972] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 0.126041] pci_bus 0000:03: bus scan returning with max=03 [ 0.126046] pci 0000:00:10.0: scanning [bus 05-06] behind bridge, pass 0 [ 0.126070] pci_bus 0000:05: scanning bus [ 0.126093] pci 0000:05:07.0: [104c:8039] type 2 class 0x000607 [ 0.126102] pci 0000:05:07.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.126116] pci 0000:05:07.0: reg 10: [mem 0xb3200000-0xb3200fff] [ 0.126124] pci 0000:05:07.0: calling quirk_resource_alignment+0x0/0x166 [ 0.126141] pci 0000:05:07.0: supports D1 D2 [ 0.126144] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.126149] pci 0000:05:07.0: PME# disabled [ 0.126169] pci 0000:05:07.1: [104c:803a] type 0 class 0x000c00 [ 0.126177] pci 0000:05:07.1: calling quirk_mmio_always_on+0x0/0x13 [ 0.126191] pci 0000:05:07.1: reg 10: [mem 0xb3201000-0xb32017ff] [ 0.126203] pci 0000:05:07.1: reg 14: [mem 0xb3204000-0xb3207fff] [ 0.126251] pci 0000:05:07.1: calling quirk_resource_alignment+0x0/0x166 [ 0.126269] pci 0000:05:07.1: supports D1 D2 [ 0.126271] pci 0000:05:07.1: PME# supported from D0 D1 D2 D3hot [ 0.126276] pci 0000:05:07.1: PME# disabled [ 0.126296] pci 0000:05:07.2: [104c:803b] type 0 class 0x000180 [ 0.126304] pci 0000:05:07.2: calling quirk_mmio_always_on+0x0/0x13 [ 0.126318] pci 0000:05:07.2: reg 10: [mem 0xb3202000-0xb3202fff] [ 0.126373] pci 0000:05:07.2: calling quirk_resource_alignment+0x0/0x166 [ 0.126389] pci 0000:05:07.2: supports D1 D2 [ 0.126392] pci 0000:05:07.2: PME# supported from D0 D1 D2 D3hot [ 0.126397] pci 0000:05:07.2: PME# disabled [ 0.126416] pci 0000:05:07.3: [104c:803c] type 0 class 0x000805 [ 0.126424] pci 0000:05:07.3: calling quirk_mmio_always_on+0x0/0x13 [ 0.126438] pci 0000:05:07.3: reg 10: [mem 0xb3201800-0xb32018ff] [ 0.126493] pci 0000:05:07.3: calling quirk_resource_alignment+0x0/0x166 [ 0.126510] pci 0000:05:07.3: supports D1 D2 [ 0.126512] pci 0000:05:07.3: PME# supported from D0 D1 D2 D3hot [ 0.126517] pci 0000:05:07.3: PME# disabled [ 0.126559] pci_bus 0000:05: fixups for bus [ 0.126562] pci 0000:00:10.0: PCI bridge to [bus 05-06] (subtractive decode) [ 0.126634] pci 0000:00:10.0: bridge window [mem 0xb3200000-0xb32fffff] [ 0.126639] pci 0000:00:10.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.126643] pci 0000:00:10.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.126647] pci 0000:00:10.0: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode) [ 0.126652] pci 0000:05:07.0: scanning [bus 06-06] behind bridge, pass 0 [ 0.126666] pci 0000:05:07.0: scanning [bus 06-06] behind bridge, pass 1 [ 0.126698] pci_bus 0000:06: [bus 06-09] partially hidden behind transparent bridge 0000:05 [bus 05-06] [ 0.126784] pci_bus 0000:05: bus scan returning with max=09 [ 0.126789] pci 0000:00:02.0: scanning [bus 01-02] behind bridge, pass 1 [ 0.126794] pci 0000:00:03.0: scanning [bus 03-03] behind bridge, pass 1 [ 0.126799] pci 0000:00:10.0: scanning [bus 05-06] behind bridge, pass 1 [ 0.126804] pci_bus 0000:00: bus scan returning with max=09 [ 0.127092] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.134133] pci 0000:00:0a.0: default IRQ router [10de:0260] [ 0.134239] PCI: pci_cache_line_size set to 64 bytes [ 0.134256] pci 0000:00:05.0: BAR 0: reserving [mem 0xb2000000-0xb2ffffff flags 0x40200] (d=0, p=0) [ 0.134260] pci 0000:00:05.0: BAR 1: reserving [mem 0xc0000000-0xcfffffff flags 0x14220c] (d=0, p=0) [ 0.134265] pci 0000:00:05.0: BAR 3: reserving [mem 0xb1000000-0xb1ffffff flags 0x140204] (d=0, p=0) [ 0.134275] pci 0000:00:0a.1: BAR 4: reserving [io 0x3040-0x307f flags 0x40101] (d=0, p=0) [ 0.134280] pci 0000:00:0a.1: BAR 5: reserving [io 0x3000-0x303f flags 0x40101] (d=0, p=0) [ 0.134286] pci 0000:00:0b.0: BAR 0: reserving [mem 0xb0004000-0xb0004fff flags 0x40200] (d=0, p=0) [ 0.134292] pci 0000:00:0b.1: BAR 0: reserving [mem 0xb0005000-0xb00050ff flags 0x40200] (d=0, p=0) [ 0.134298] pci 0000:00:0d.0: BAR 0: reserving [io 0x01f0-0x01f7 flags 0x110] (d=0, p=0) [ 0.134302] pci 0000:00:0d.0: BAR 1: reserving [io 0x03f6 flags 0x110] (d=0, p=0) [ 0.134306] pci 0000:00:0d.0: BAR 2: reserving [io 0x0170-0x0177 flags 0x110] (d=0, p=0) [ 0.134310] pci 0000:00:0d.0: BAR 3: reserving [io 0x0376 flags 0x110] (d=0, p=0) [ 0.134315] pci 0000:00:0d.0: BAR 4: reserving [io 0x3080-0x308f flags 0x40101] (d=0, p=0) [ 0.134320] pci 0000:00:0e.0: BAR 0: reserving [io 0x30b0-0x30b7 flags 0x40101] (d=0, p=0) [ 0.134325] pci 0000:00:0e.0: BAR 1: reserving [io 0x30a4-0x30a7 flags 0x40101] (d=0, p=0) [ 0.134329] pci 0000:00:0e.0: BAR 2: reserving [io 0x30a8-0x30af flags 0x40101] (d=0, p=0) [ 0.134334] pci 0000:00:0e.0: BAR 3: reserving [io 0x30a0-0x30a3 flags 0x40101] (d=0, p=0) [ 0.134338] pci 0000:00:0e.0: BAR 4: reserving [io 0x3090-0x309f flags 0x40101] (d=0, p=0) [ 0.134345] pci 0000:00:10.1: BAR 0: reserving [mem 0xb0000000-0xb0003fff flags 0x40200] (d=0, p=0) [ 0.134351] pci 0000:00:14.0: BAR 0: reserving [mem 0xb0007000-0xb0007fff flags 0x40200] (d=0, p=0) [ 0.134356] pci 0000:00:14.0: BAR 1: reserving [io 0x30b8-0x30bf flags 0x40101] (d=0, p=0) [ 0.134366] pci 0000:05:07.1: BAR 0: reserving [mem 0xb3201000-0xb32017ff flags 0x40200] (d=0, p=0) [ 0.134371] pci 0000:05:07.1: BAR 1: reserving [mem 0xb3204000-0xb3207fff flags 0x40200] (d=0, p=0) [ 0.134377] pci 0000:05:07.2: BAR 0: reserving [mem 0xb3202000-0xb3202fff flags 0x40200] (d=0, p=0) [ 0.134383] pci 0000:05:07.3: BAR 0: reserving [mem 0xb3201800-0xb32018ff flags 0x40200] (d=0, p=0) [ 0.134407] pci 0000:00:0e.0: BAR 5: reserving [mem 0xb0006000-0xb0006fff flags 0x40200] (d=1, p=1) [ 0.134420] pci 0000:05:07.0: BAR 0: reserving [mem 0xb3200000-0xb3200fff flags 0x40200] (d=1, p=1) [ 0.134430] reserve RAM buffer: 000000000009dc00 - 000000000009ffff [ 0.134433] reserve RAM buffer: 000000007bf10000 - 000000007bffffff [ 0.135673] pnp: PnP ACPI: disabled [ 0.137748] PCI: max bus depth: 2 pci_try_num: 3 [ 0.137781] pci 0000:00:05.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref] [ 0.137866] pci 0000:00:02.0: PCI bridge to [bus 01-02] [ 0.137932] pci 0000:00:02.0: bridge window [io 0x4000-0x4fff] [ 0.138000] pci 0000:00:02.0: bridge window [mem 0xb3000000-0xb31fffff] [ 0.138070] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.138153] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 0.138226] pci 0000:05:07.0: BAR 16: assigned [mem 0x84000000-0x87ffffff] [ 0.138297] pci 0000:05:07.0: BAR 15: assigned [mem 0x88000000-0x8bffffff pref] [ 0.138381] pci 0000:05:07.0: BAR 14: assigned [io 0x1000-0x10ff] [ 0.138450] pci 0000:05:07.0: BAR 13: assigned [io 0x1400-0x14ff] [ 0.138517] pci 0000:05:07.0: CardBus bridge to [bus 06-09] [ 0.138583] pci 0000:05:07.0: bridge window [io 0x1400-0x14ff] [ 0.138653] pci 0000:05:07.0: bridge window [io 0x1000-0x10ff] [ 0.138722] pci 0000:05:07.0: bridge window [mem 0x88000000-0x8bffffff pref] [ 0.138805] pci 0000:05:07.0: bridge window [mem 0x84000000-0x87ffffff] [ 0.138875] pci 0000:00:10.0: PCI bridge to [bus 05-06] [ 0.138943] pci 0000:00:10.0: bridge window [mem 0xb3200000-0xb32fffff] [ 0.139022] pci 0000:00:02.0: setting latency timer to 64 [ 0.139027] pci 0000:00:03.0: setting latency timer to 64 [ 0.139033] pci 0000:00:10.0: setting latency timer to 64 [ 0.139040] pci 0000:05:07.0: enabling device (0104 -> 0107) [ 0.139111] pci 0000:05:07.0: PCI INT A -> PIRQ 0a, mask cca0, excl 0000 [ 0.139115] pci 0000:05:07.0: PCI INT A -> newirq 10 [ 0.139117] pci 0000:05:07.0: can't route interrupt [ 0.139124] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.139127] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.139131] pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffffff] [ 0.139134] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.139137] pci_bus 0000:01: resource 1 [mem 0xb3000000-0xb31fffff] [ 0.139141] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.139145] pci_bus 0000:05: resource 1 [mem 0xb3200000-0xb32fffff] [ 0.139148] pci_bus 0000:05: resource 4 [io 0x0000-0xffff] [ 0.139152] pci_bus 0000:05: resource 5 [mem 0x000a0000-0x000bffff] [ 0.139155] pci_bus 0000:05: resource 6 [mem 0x80000000-0xfcffffffff] [ 0.139158] pci_bus 0000:06: resource 0 [io 0x1400-0x14ff] [ 0.139162] pci_bus 0000:06: resource 1 [io 0x1000-0x10ff] [ 0.139165] pci_bus 0000:06: resource 2 [mem 0x88000000-0x8bffffff pref] [ 0.139168] pci_bus 0000:06: resource 3 [mem 0x84000000-0x87ffffff] [ 0.139210] NET: Registered protocol family 2 [ 0.139311] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.139540] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.140467] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.140748] TCP: Hash tables configured (established 131072 bind 65536) [ 0.140816] TCP reno registered [ 0.140880] UDP hash table entries: 512 (order: 1, 8192 bytes) [ 0.140952] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) [ 0.141090] NET: Registered protocol family 1 [ 0.141168] pci 0000:00:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.141184] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.141189] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.141194] pci 0000:00:00.0: calling pci_fixup_video+0x0/0x8b [ 0.141199] pci 0000:00:00.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.141204] pci 0000:00:00.1: calling quirk_cardbus_legacy+0x0/0x16 [ 0.141209] pci 0000:00:00.1: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.141213] pci 0000:00:00.1: calling pci_fixup_video+0x0/0x8b [ 0.141219] pci 0000:00:00.2: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.141224] pci 0000:00:00.2: calling quirk_cardbus_legacy+0x0/0x16 [ 0.141228] pci 0000:00:00.2: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.141233] pci 0000:00:00.2: calling pci_fixup_video+0x0/0x8b [ 0.141238] pci 0000:00:00.3: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.141243] pci 0000:00:00.3: calling quirk_cardbus_legacy+0x0/0x16 [ 0.141248] pci 0000:00:00.3: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.141252] pci 0000:00:00.3: calling pci_fixup_video+0x0/0x8b [ 0.141257] pci 0000:00:00.4: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.141262] pci 0000:00:00.4: calling quirk_cardbus_legacy+0x0/0x16 [ 0.141267] pci 0000:00:00.4: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.141271] pci 0000:00:00.4: calling pci_fixup_video+0x0/0x8b [ 0.141277] pci 0000:00:00.5: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.141284] pci 0000:00:00.5: calling quirk_cardbus_legacy+0x0/0x16 [ 0.141288] pci 0000:00:00.5: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.141292] pci 0000:00:00.5: calling pci_fixup_video+0x0/0x8b [ 0.141298] pci 0000:00:00.6: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.141303] pci 0000:00:00.6: calling quirk_cardbus_legacy+0x0/0x16 [ 0.141307] pci 0000:00:00.6: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.141311] pci 0000:00:00.6: calling pci_fixup_video+0x0/0x8b [ 0.141317] pci 0000:00:00.7: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.141322] pci 0000:00:00.7: calling quirk_cardbus_legacy+0x0/0x16 [ 0.141326] pci 0000:00:00.7: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.141331] pci 0000:00:00.7: calling pci_fixup_video+0x0/0x8b [ 0.141336] pci 0000:00:02.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.141357] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.141425] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.141429] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.141434] pci 0000:00:02.0: calling pci_fixup_video+0x0/0x8b [ 0.141439] pci 0000:00:03.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.141462] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.141530] pci 0000:00:03.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.141534] pci 0000:00:03.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.141538] pci 0000:00:03.0: calling pci_fixup_video+0x0/0x8b [ 0.141544] pci 0000:00:05.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.141550] pci 0000:00:05.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.141555] pci 0000:00:05.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.141559] pci 0000:00:05.0: calling pci_fixup_video+0x0/0x8b [ 0.141562] pci 0000:00:05.0: Boot video device [ 0.141567] pci 0000:00:09.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.141592] pci 0000:00:09.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.141596] pci 0000:00:09.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.141601] pci 0000:00:09.0: calling pci_fixup_video+0x0/0x8b [ 0.141608] pci 0000:00:0a.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.141613] pci 0000:00:0a.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.141618] pci 0000:00:0a.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.141622] pci 0000:00:0a.0: calling pci_fixup_video+0x0/0x8b [ 0.141628] pci 0000:00:0a.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.141639] pci 0000:00:0a.1: calling quirk_cardbus_legacy+0x0/0x16 [ 0.141643] pci 0000:00:0a.1: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.141648] pci 0000:00:0a.1: calling pci_fixup_video+0x0/0x8b [ 0.141653] pci 0000:00:0b.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.141662] pci 0000:00:0b.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.141666] pci 0000:00:0b.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.206662] pci 0000:00:0b.0: calling pci_fixup_video+0x0/0x8b [ 0.206669] pci 0000:00:0b.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.206679] pci 0000:00:0b.1: calling quirk_cardbus_legacy+0x0/0x16 [ 0.206683] pci 0000:00:0b.1: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.206700] pci 0000:00:0b.1: calling pci_fixup_video+0x0/0x8b [ 0.206707] pci 0000:00:0d.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.206717] pci 0000:00:0d.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.206722] pci 0000:00:0d.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.206726] pci 0000:00:0d.0: calling pci_fixup_video+0x0/0x8b [ 0.206732] pci 0000:00:0e.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.206790] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.206858] pci 0000:00:0e.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.206862] pci 0000:00:0e.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.206867] pci 0000:00:0e.0: calling pci_fixup_video+0x0/0x8b [ 0.206872] pci 0000:00:10.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.206933] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.207001] pci 0000:00:10.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.207005] pci 0000:00:10.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.207010] pci 0000:00:10.0: calling pci_fixup_video+0x0/0x8b [ 0.207015] pci 0000:00:10.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.207079] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.207146] pci 0000:00:10.1: calling quirk_cardbus_legacy+0x0/0x16 [ 0.207151] pci 0000:00:10.1: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.207155] pci 0000:00:10.1: calling pci_fixup_video+0x0/0x8b [ 0.207161] pci 0000:00:14.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.207169] pci 0000:00:14.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.207173] pci 0000:00:14.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.207178] pci 0000:00:14.0: calling pci_fixup_video+0x0/0x8b [ 0.207184] pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.207188] pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.207192] pci 0000:00:18.0: calling pci_fixup_video+0x0/0x8b [ 0.207198] pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x16 [ 0.207202] pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.207206] pci 0000:00:18.1: calling pci_fixup_video+0x0/0x8b [ 0.207212] pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x16 [ 0.207216] pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.207221] pci 0000:00:18.2: calling pci_fixup_video+0x0/0x8b [ 0.207226] pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x16 [ 0.207230] pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.207235] pci 0000:00:18.3: calling pci_fixup_video+0x0/0x8b [ 0.207240] pci 0000:05:07.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.207246] pci 0000:05:07.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.207250] pci 0000:05:07.0: calling pci_fixup_video+0x0/0x8b [ 0.207256] pci 0000:05:07.1: calling quirk_cardbus_legacy+0x0/0x16 [ 0.207261] pci 0000:05:07.1: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.207265] pci 0000:05:07.1: calling pci_fixup_video+0x0/0x8b [ 0.207271] pci 0000:05:07.2: calling quirk_cardbus_legacy+0x0/0x16 [ 0.207276] pci 0000:05:07.2: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.207280] pci 0000:05:07.2: calling pci_fixup_video+0x0/0x8b [ 0.207286] pci 0000:05:07.3: calling quirk_cardbus_legacy+0x0/0x16 [ 0.207291] pci 0000:05:07.3: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.207295] pci 0000:05:07.3: calling pci_fixup_video+0x0/0x8b [ 0.207299] PCI: CLS 64 bytes, default 64 [ 0.207352] Unpacking initramfs... [ 0.306643] Freeing initrd memory: 3048k freed [ 0.309020] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.313427] highmem bounce pool size: 64 pages [ 0.313434] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.330344] msgmni has been set to 1741 [ 0.330564] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.330647] io scheduler noop registered [ 0.330710] io scheduler deadline registered [ 0.330784] io scheduler cfq registered (default) [ 0.331275] vga16fb: initializing [ 0.331279] vga16fb: mapped to 0xc00a0000 [ 0.331426] fb0: VGA16 VGA frame buffer device [ 0.376477] Linux agpgart interface v0.103 [ 0.376758] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.378532] i8042: Detected active multiplexing controller, rev 1.1 [ 0.380490] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.380558] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.380660] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.380738] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.380804] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.381196] mousedev: PS/2 mouse device common for all mice [ 0.381518] rtc (null): alarm rollover: day [ 0.381605] rtc_cmos: dev (254:0) [ 0.381614] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.381704] rtc0: alarms up to one day, 114 bytes nvram [ 0.381798] cpuidle: using governor ladder [ 0.381861] cpuidle: using governor menu [ 0.381935] TCP cubic registered [ 0.381998] NET: Registered protocol family 17 [ 0.382067] Registering the dns_resolver key type [ 0.382156] Using IPI Shortcut mode [ 0.382437] PM: Hibernation image not present or could not be loaded. [ 0.386966] Magic number: 7:298:943 [ 0.387106] tty ptyye: hash matches [ 0.387219] tty tty0: hash matches [ 0.387282] tty console: hash matches [ 0.387386] rtc_cmos rtc_cmos: setting system clock to 2011-08-24 15:54:11 UTC (1314201251) [ 0.387581] Freeing unused kernel memory: 304k freed [ 0.387861] Write protecting the kernel text: 1840k [ 0.390007] Write protecting the kernel read-only data: 984k [ 0.390073] NX-protecting the kernel data: 2256k [ 0.406815] udevd[668]: starting version 172 [ 0.413085] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.488364] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.488470] forcedeth 0000:00:14.0: PCI INT A -> PIRQ 11, mask cca0, excl 0000 [ 0.488474] forcedeth 0000:00:14.0: PCI INT A -> newirq 10 [ 0.488477] forcedeth 0000:00:14.0: can't route interrupt [ 0.488483] forcedeth 0000:00:14.0: setting latency timer to 64 [ 0.512759] usbcore: registered new interface driver usbfs [ 0.512853] usbcore: registered new interface driver hub [ 0.516213] SCSI subsystem initialized [ 0.528023] usbcore: registered new device driver usb [ 0.528656] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.560717] libata version 3.00 loaded. [ 1.013772] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:90:f5:67:a6:d3 [ 1.013860] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3 [ 1.014076] ehci_hcd 0000:00:0b.1: PCI INT B -> PIRQ 0a, mask cca0, excl 0000 [ 1.014080] ehci_hcd 0000:00:0b.1: PCI INT B -> newirq 10 [ 1.014082] ehci_hcd 0000:00:0b.1: can't route interrupt [ 1.014102] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 1.014107] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 1.014195] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 1.014305] ehci_hcd 0000:00:0b.1: debug port 1 [ 1.014377] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported [ 1.014388] ehci_hcd 0000:00:0b.1: irq 10, io mem 0xb0005000 [ 1.023278] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 1.023609] hub 1-0:1.0: USB hub found [ 1.023677] hub 1-0:1.0: 8 ports detected [ 1.024303] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.024399] ohci_hcd 0000:00:0b.0: PCI INT A -> PIRQ 0f, mask cca0, excl 0000 [ 1.024402] ohci_hcd 0000:00:0b.0: PCI INT A -> newirq 11 [ 1.024405] ohci_hcd 0000:00:0b.0: can't route interrupt [ 1.024425] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 1.024429] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 1.024508] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 1.024614] ohci_hcd 0000:00:0b.0: irq 11, io mem 0xb0004000 [ 1.078936] hub 2-0:1.0: USB hub found [ 1.079009] hub 2-0:1.0: 8 ports detected [ 1.079163] sata_nv 0000:00:0e.0: version 3.5 [ 1.079172] sata_nv 0000:00:0e.0: enabling device (0005 -> 0007) [ 1.079244] sata_nv 0000:00:0e.0: PCI INT A -> PIRQ 0e, mask cca0, excl 0000 [ 1.079247] sata_nv 0000:00:0e.0: PCI INT A -> newirq 7 [ 1.079250] sata_nv 0000:00:0e.0: can't route interrupt [ 1.079254] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 1.079370] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 1.080576] scsi0 : sata_nv [ 1.082362] scsi1 : sata_nv [ 1.082500] ata1: SATA max UDMA/133 cmd 0x30b0 ctl 0x30a4 bmdma 0x3090 irq 7 [ 1.082571] ata2: SATA max UDMA/133 cmd 0x30a8 ctl 0x30a0 bmdma 0x3098 irq 7 [ 1.082685] pata_amd 0000:00:0d.0: version 0.4.1 [ 1.082733] pata_amd 0000:00:0d.0: setting latency timer to 64 [ 1.083484] scsi2 : pata_amd [ 1.085196] scsi3 : pata_amd [ 1.085337] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14 [ 1.085406] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15 [ 1.085788] ata3: port disabled--ignoring [ 1.309922] Switching to clocksource tsc [ 1.329854] usb 1-5: new high speed USB device number 2 using ehci_hcd [ 1.549914] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.556984] ata1.00: HPA detected: current 153356490, native 156301488 [ 1.557056] ata1.00: ATA-7: FUJITSU MHV2080BH, 0085002A, max UDMA/100 [ 1.557124] ata1.00: 153356490 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.570319] ata1.00: configured for UDMA/100 [ 1.570483] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080B 0085 PQ: 0 ANSI: 5 [ 1.883281] ata2: SATA link down (SStatus 0 SControl 300) [ 2.043669] ata4.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.60, max UDMA/33 [ 2.043741] ata4: nv_mode_filter: 0x739f&0x3f3ff->0x739f, BIOS=0x3f000 (0xc600) ACPI=0x0 [ 2.056935] ata4.00: configured for UDMA/33 [ 2.059268] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.60 PQ: 0 ANSI: 5 [ 2.070579] sd 0:0:0:0: [sda] 153356490 512-byte logical blocks: (78.5 GB/73.1 GiB) [ 2.070706] sd 0:0:0:0: [sda] Write Protect is off [ 2.070773] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.070793] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.072633] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.072638] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.073112] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 2.360679] sda: sda1 sda2 < sda5 sda6 > [ 2.361203] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.365107] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.365269] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 2.789912] PM: Starting manual resume from disk [ 2.789995] PM: Hibernation image partition 8:6 present [ 2.789997] PM: Looking for hibernation image. [ 2.790293] PM: Image not found (code -22) [ 2.790295] PM: Hibernation image not present or could not be loaded. [ 2.793967] PM: Marking nosave pages: 000000000009d000 - 0000000000100000 [ 2.793972] PM: Basic memory bitmaps created [ 2.811802] PM: Basic memory bitmaps freed [ 2.881323] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem [ 2.980190] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 6.759947] udevd[851]: starting version 172 [ 7.782356] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 7.955962] i2c i2c-0: nForce2 SMBus adapter at 0x3040 [ 7.956053] i2c i2c-1: nForce2 SMBus adapter at 0x3000 [ 7.977732] NV_TCO: NV TCO WatchDog Timer Driver v0.01 [ 7.977890] NV_TCO: Watchdog reboot not detected. [ 7.978947] NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0) [ 8.116106] cfg80211: Calling CRDA to update world regulatory domain [ 8.351512] snd_hda_intel 0000:00:10.1: PCI INT B not routed [ 8.351519] hda_intel: Disabling MSI [ 8.351608] snd_hda_intel 0000:00:10.1: setting latency timer to 64 [ 8.617331] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x81a0b1, caps: 0xa04713/0x204000/0x0 [ 8.627500] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 8.627888] ieee80211 phy0: hwaddr 00:15:af:65:3e:90, RTL8187vB (default) V1 + rtl8225, rfkill mask 2 [ 8.639720] rtl8187: Customer ID is 0x00 [ 8.640246] Registered led device: rtl8187-phy0::radio [ 8.640540] Registered led device: rtl8187-phy0::tx [ 8.640818] Registered led device: rtl8187-phy0::rx [ 8.641210] rtl8187: wireless switch is off [ 8.641488] usbcore: registered new interface driver rtl8187 [ 8.652469] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1 [ 9.335685] udevd[869]: renamed network interface wlan0 to wlan1 [ 11.398070] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000 [ 12.201533] hda_codec: ALC883: SKU not ready 0x411111f0 [ 12.288295] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/input/input2 [ 13.605471] Adding 1004024k swap on /dev/sda6. Priority:-1 extents:1 across:1004024k [ 13.609702] EXT4-fs (sda5): re-mounted. Opts: (null) [ 13.920083] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 14.044498] fuse init (API version 7.17) [ 15.714140] RPC: Registered named UNIX socket transport module. [ 15.714224] RPC: Registered udp transport module. [ 15.714289] RPC: Registered tcp transport module. [ 15.714353] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 19.431629] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3400+ (1 cpu cores) (version 2.20.00) [ 19.437085] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects [ 19.437154] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup