[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.37-rc4-00153-g59e57c6-dirty (root@darussia-amd) (gcc version 4.5.1 (Gentoo 4.5.1-r1 p1.3, pie-0.4.5) ) #5 SMP Fri Dec 3 19:56:50 CET 2010 [ 0.000000] Command line: root=/dev/sda2 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000057e70000 (usable) [ 0.000000] BIOS-e820: 0000000057e70000 - 0000000057e82000 (ACPI data) [ 0.000000] BIOS-e820: 0000000057e82000 - 0000000057e84000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000057e84000 - 0000000060000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: SB600/Satellite A210, BIOS 1.80 08/04/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x57e70 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [ffff8800000f83b0] f83b0 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000057e70000 [ 0.000000] 0000000000 - 0057e00000 page 2M [ 0.000000] 0057e00000 - 0057e70000 page 4k [ 0.000000] kernel direct mapping tables up to 57e70000 @ 1fffc000-20000000 [ 0.000000] ACPI: RSDP 00000000000f82f0 00024 (v02 TOSINV) [ 0.000000] ACPI: XSDT 0000000057e7a3ae 00054 (v01 TOSINV TOSINV00 06040000 INV 00000000) [ 0.000000] ACPI: FACP 0000000057e81a8c 000F4 (v03 ATI Herring 06040000 ATI 000F4240) [ 0.000000] ACPI: DSDT 0000000057e7a402 0768A (v01 TOSINV SB600 06040000 MSFT 0100000E) [ 0.000000] ACPI: FACS 0000000057e83fc0 00040 [ 0.000000] ACPI: SSDT 0000000057e81bf4 001CE (v01 PTLTD POWERNOW 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 0000000057e81dc2 00054 (v01 TOSINV ? APIC 06040000 INV 00000000) [ 0.000000] ACPI: SLIC 0000000057e81e16 00176 (v01 TOSINV TOSINV00 06040000 INV 00000000) [ 0.000000] ACPI: MCFG 0000000057e81f8c 0003C (v01 TOSINV MCFG 06040000 INV 00000000) [ 0.000000] ACPI: HPET 0000000057e81fc8 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea00013fffff] PMD -> [ffff880056000000-ffff8800573fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00057e70 [ 0.000000] On node 0 totalpages: 359933 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3919 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 4867 pages used for memmap [ 0.000000] DMA32 zone: 351085 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:80000000) [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 23 pages/cpu @ffff880057c00000 s73408 r0 d20800 u1048576 [ 0.000000] pcpu-alloc: s73408 r0 d20800 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 355004 [ 0.000000] Kernel command line: root=/dev/sda2 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 866a000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 1406444k/1440192k available (6077k kernel code, 460k absent, 33288k reserved, 2513k data, 436k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1795.407 MHz processor. [ 0.001008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3590.81 BogoMIPS (lpj=1795407) [ 0.001096] pid_max: default: 32768 minimum: 301 [ 0.001176] Mount-cache hash table entries: 256 [ 0.001363] Initializing cgroup subsys ns [ 0.001408] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.001458] Initializing cgroup subsys cpuacct [ 0.001505] Initializing cgroup subsys freezer [ 0.001573] tseg: 0057f00000 [ 0.001575] CPU: Physical Processor ID: 0 [ 0.001618] CPU: Processor Core ID: 0 [ 0.001661] mce: CPU supports 5 MCE banks [ 0.001713] using C1E aware idle routine [ 0.001756] Performance Events: AMD PMU driver. [ 0.002047] ... version: 0 [ 0.002089] ... bit width: 48 [ 0.002132] ... generic registers: 4 [ 0.002174] ... value mask: 0000ffffffffffff [ 0.002217] ... max period: 00007fffffffffff [ 0.002261] ... fixed-purpose events: 0 [ 0.002303] ... event mask: 000000000000000f [ 0.002392] ACPI: Core revision 20101013 [ 0.002436] TOSHIBA Satellite detected - force copy of DSDT to local memory [ 0.010045] ACPI: Forced DSDT copy: length 0x0768A copied locally, original unmapped [ 0.014060] Setting APIC routing to flat [ 0.014417] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.015999] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.015999] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.015999] ..... (found apic 0 pin 0) ... [ 0.026224] ....... works. [ 0.026269] CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 stepping 01 [ 0.026999] MCE: In-kernel MCE decoding enabled. [ 0.026999] Booting Node 0, Processors #1 Ok. [ 0.001999] System has AMD C1E enabled [ 0.097057] Brought up 2 CPUs [ 0.097060] Total of 2 processors activated (7182.28 BogoMIPS). [ 0.097052] Switch to broadcast mode on CPU1 [ 0.097371] Switch to broadcast mode on CPU0 [ 0.097371] NET: Registered protocol family 16 [ 0.098054] node 0 link 0: io port [1000, fffff] [ 0.098054] TOM: 0000000060000000 aka 1536M [ 0.098074] node 0 link 0: mmio [f8100000, ffffffff] [ 0.098077] node 0 link 0: mmio [f8000000, f80fffff] [ 0.098080] node 0 link 0: mmio [f8000000, f7ffffff] [ 0.098083] node 0 link 0: mmio [f0000000, f7ffffff] [ 0.098085] node 0 link 0: mmio [a0000, bffff] [ 0.098088] node 0 link 0: mmio [f0000000, efffffff] [ 0.098091] node 0 link 0: mmio [e0000000, efffffff] [ 0.098094] node 0 link 0: mmio [60000000, dfffffff] [ 0.098097] bus: [00, ff] on node 0 link 0 [ 0.098100] bus: 00 index 0 [io 0x0000-0xffff] [ 0.098103] bus: 00 index 1 [mem 0x60000000-0xfcffffffff] [ 0.098105] bus: 00 index 2 [mem 0x000a0000-0x000bffff] [ 0.098114] ACPI: bus type pci registered [ 0.098171] PCI: MMCONFIG for domain 0000 [bus 00-18] at [mem 0xe0000000-0xe18fffff] (base 0xe0000000) [ 0.098171] PCI: MMCONFIG at [mem 0xe0000000-0xe18fffff] reserved in E820 [ 0.100818] PCI: Using configuration type 1 for base access [ 0.112059] bio: create slab at 0 [ 0.113494] ACPI: EC: Look up EC in DSDT [ 0.115926] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.266030] ACPI: Interpreter enabled [ 0.266078] ACPI: (supports S0 S3 S4 S5) [ 0.266287] ACPI: Using IOAPIC for interrupt routing [ 0.286092] ACPI: EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62 [ 0.286163] ACPI: Power Resource [PFA1] (off) [ 0.286163] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.287657] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.289408] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.289462] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d1fff] [ 0.289512] pci_root PNP0A08:00: host bridge window [mem 0x000d2000-0x000d3fff] [ 0.289560] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d5fff] [ 0.289609] pci_root PNP0A08:00: host bridge window [mem 0x000d6000-0x000d7fff] [ 0.289658] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000d9fff] [ 0.289707] pci_root PNP0A08:00: host bridge window [mem 0x000da000-0x000dbfff] [ 0.289757] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000ddfff] [ 0.289806] pci_root PNP0A08:00: host bridge window [mem 0x000de000-0x000dffff] [ 0.289856] pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xdfffffff] [ 0.289905] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff] [ 0.289954] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.290002] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.290061] pci 0000:00:00.0: [1002:7910] type 0 class 0x000600 [ 0.290093] pci 0000:00:01.0: [1002:7912] type 1 class 0x000604 [ 0.290131] pci 0000:00:04.0: [1002:7914] type 1 class 0x000604 [ 0.290158] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.290162] pci 0000:00:04.0: PME# disabled [ 0.290176] pci 0000:00:05.0: [1002:7915] type 1 class 0x000604 [ 0.290202] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.290205] pci 0000:00:05.0: PME# disabled [ 0.290219] pci 0000:00:06.0: [1002:7916] type 1 class 0x000604 [ 0.290245] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.290248] pci 0000:00:06.0: PME# disabled [ 0.290287] pci 0000:00:12.0: [1002:4380] type 0 class 0x000101 [ 0.290307] pci 0000:00:12.0: reg 10: [io 0x8440-0x8447] [ 0.290318] pci 0000:00:12.0: reg 14: [io 0x8434-0x8437] [ 0.290329] pci 0000:00:12.0: reg 18: [io 0x8438-0x843f] [ 0.290340] pci 0000:00:12.0: reg 1c: [io 0x8430-0x8433] [ 0.290352] pci 0000:00:12.0: reg 20: [io 0x8400-0x840f] [ 0.290363] pci 0000:00:12.0: reg 24: [mem 0xf8609000-0xf86093ff] [ 0.290386] pci 0000:00:12.0: set SATA to AHCI mode [ 0.290459] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03 [ 0.290475] pci 0000:00:13.0: reg 10: [mem 0xf8604000-0xf8604fff] [ 0.290545] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03 [ 0.290561] pci 0000:00:13.1: reg 10: [mem 0xf8605000-0xf8605fff] [ 0.290631] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03 [ 0.290647] pci 0000:00:13.2: reg 10: [mem 0xf8606000-0xf8606fff] [ 0.290717] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03 [ 0.290732] pci 0000:00:13.3: reg 10: [mem 0xf8607000-0xf8607fff] [ 0.290803] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03 [ 0.290818] pci 0000:00:13.4: reg 10: [mem 0xf8608000-0xf8608fff] [ 0.290895] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03 [ 0.290917] pci 0000:00:13.5: reg 10: [mem 0xf8609400-0xf86094ff] [ 0.290993] pci 0000:00:13.5: supports D1 D2 [ 0.291002] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.291007] pci 0000:00:13.5: PME# disabled [ 0.291032] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.291056] pci 0000:00:14.0: reg 10: [io 0x8410-0x841f] [ 0.291139] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101 [ 0.291154] pci 0000:00:14.1: reg 10: [io 0x01f0-0x01f7] [ 0.291166] pci 0000:00:14.1: reg 14: [io 0x03f4-0x03f7] [ 0.291177] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.291188] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.291199] pci 0000:00:14.1: reg 20: [io 0x8420-0x842f] [ 0.291240] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.291264] pci 0000:00:14.2: reg 10: [mem 0xf8600000-0xf8603fff 64bit] [ 0.291328] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.291333] pci 0000:00:14.2: PME# disabled [ 0.291349] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601 [ 0.291430] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.291480] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.291499] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.291516] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.291534] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.291582] pci 0000:01:05.0: [1002:791f] type 0 class 0x000300 [ 0.291593] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.291601] pci 0000:01:05.0: reg 18: [mem 0xf8100000-0xf810ffff 64bit] [ 0.291607] pci 0000:01:05.0: reg 20: [io 0x9000-0x90ff] [ 0.291613] pci 0000:01:05.0: reg 24: [mem 0xf8000000-0xf80fffff] [ 0.291626] pci 0000:01:05.0: supports D1 D2 [ 0.291642] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.291690] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] [ 0.291695] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf81fffff] [ 0.291700] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.291724] pci 0000:00:04.0: PCI bridge to [bus 02-07] [ 0.291770] pci 0000:00:04.0: bridge window [io 0x0000-0x0000] (disabled) [ 0.291774] pci 0000:00:04.0: bridge window [mem 0x00000000-0x000fffff] (disabled) [ 0.291778] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.291821] pci 0000:08:00.0: [10ec:8136] type 0 class 0x000200 [ 0.291837] pci 0000:08:00.0: reg 10: [io 0xa000-0xa0ff] [ 0.291863] pci 0000:08:00.0: reg 18: [mem 0xf8200000-0xf8200fff 64bit] [ 0.291894] pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.291932] pci 0000:08:00.0: supports D1 D2 [ 0.291934] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.291939] pci 0000:08:00.0: PME# disabled [ 0.291955] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.292034] pci 0000:00:05.0: PCI bridge to [bus 08-0d] [ 0.292080] pci 0000:00:05.0: bridge window [io 0xa000-0xafff] [ 0.292084] pci 0000:00:05.0: bridge window [mem 0xf8200000-0xf82fffff] [ 0.292088] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.292113] pci 0000:00:06.0: PCI bridge to [bus 0e-13] [ 0.292159] pci 0000:00:06.0: bridge window [io 0x0000-0x0000] (disabled) [ 0.292162] pci 0000:00:06.0: bridge window [mem 0x00000000-0x000fffff] (disabled) [ 0.292167] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.292206] pci 0000:14:06.0: [1180:0832] type 0 class 0x000c00 [ 0.292223] pci 0000:14:06.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 0.292272] pci 0000:14:06.0: MMC cards are now supported by standard SDHCI controller [ 0.292335] pci 0000:14:06.0: reg 10: [mem 0xf8300000-0xf83007ff] [ 0.292426] pci 0000:14:06.0: supports D1 D2 [ 0.292429] pci 0000:14:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.292435] pci 0000:14:06.0: PME# disabled [ 0.292458] pci 0000:14:06.1: [1180:0822] type 0 class 0x000805 [ 0.292482] pci 0000:14:06.1: reg 10: [mem 0xf8300800-0xf83008ff] [ 0.292573] pci 0000:14:06.1: supports D1 D2 [ 0.292575] pci 0000:14:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.292581] pci 0000:14:06.1: PME# disabled [ 0.292604] pci 0000:14:06.2: [1180:0592] type 0 class 0x000880 [ 0.292627] pci 0000:14:06.2: reg 10: [mem 0xf8301000-0xf83010ff] [ 0.292718] pci 0000:14:06.2: supports D1 D2 [ 0.292721] pci 0000:14:06.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.292726] pci 0000:14:06.2: PME# disabled [ 0.292750] pci 0000:14:06.3: [1180:0852] type 0 class 0x000880 [ 0.292773] pci 0000:14:06.3: reg 10: [mem 0xf8301400-0xf83014ff] [ 0.292864] pci 0000:14:06.3: supports D1 D2 [ 0.292866] pci 0000:14:06.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.292872] pci 0000:14:06.3: PME# disabled [ 0.292929] pci 0000:00:14.4: PCI bridge to [bus 14-19] (subtractive decode) [ 0.292978] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) [ 0.292983] pci 0000:00:14.4: bridge window [mem 0xf8300000-0xf83fffff] [ 0.293002] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.293006] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.293009] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode) [ 0.293012] pci 0000:00:14.4: bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode) [ 0.293015] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode) [ 0.293018] pci 0000:00:14.4: bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode) [ 0.293021] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode) [ 0.293025] pci 0000:00:14.4: bridge window [mem 0x000da000-0x000dbfff] (subtractive decode) [ 0.293028] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode) [ 0.293031] pci 0000:00:14.4: bridge window [mem 0x000de000-0x000dffff] (subtractive decode) [ 0.293034] pci 0000:00:14.4: bridge window [mem 0x60000000-0xdfffffff] (subtractive decode) [ 0.293038] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode) [ 0.293041] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.293044] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.293063] pci_bus 0000:00: on NUMA node 0 [ 0.293068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.293167] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] [ 0.293210] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [ 0.293252] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] [ 0.293298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB4_._PRT] [ 0.293344] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB5_._PRT] [ 0.293436] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.293475] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.300053] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 0.300374] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 0.300682] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 0.300990] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 0.301270] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 0.301577] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 0.301884] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 0.302232] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 0.302529] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.303056] vgaarb: loaded [ 0.303178] SCSI subsystem initialized [ 0.303178] libata version 3.00 loaded. [ 0.304028] usbcore: registered new interface driver usbfs [ 0.304081] usbcore: registered new interface driver hub [ 0.304081] usbcore: registered new device driver usb [ 0.304081] wmi: Mapper loaded [ 0.305032] Advanced Linux Sound Architecture Driver Version 1.0.23. [ 0.305076] PCI: Using ACPI for IRQ routing [ 0.305121] PCI: pci_cache_line_size set to 64 bytes [ 0.305246] reserve RAM buffer: 000000000009dc00 - 000000000009ffff [ 0.305249] reserve RAM buffer: 0000000057e70000 - 0000000057ffffff [ 0.305275] Bluetooth: Core ver 2.15 [ 0.305275] NET: Registered protocol family 31 [ 0.305275] Bluetooth: HCI device and connection manager initialized [ 0.305275] Bluetooth: HCI socket layer initialized [ 0.305275] cfg80211: Calling CRDA to update world regulatory domain [ 0.306055] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.306264] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.307050] Switching to clocksource hpet [ 0.308000] FS-Cache: Loaded [ 0.308169] CacheFiles: Loaded [ 0.308224] pnp: PnP ACPI init [ 0.308279] ACPI: bus type pnp registered [ 0.310108] pnp 00:00: [bus 00-ff] [ 0.310112] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.310115] pnp 00:00: [mem 0x000c0000-0x000c1fff window] [ 0.310118] pnp 00:00: [mem 0x000c2000-0x000c3fff window] [ 0.310121] pnp 00:00: [mem 0x000c4000-0x000c5fff window] [ 0.310124] pnp 00:00: [mem 0x000c6000-0x000c7fff window] [ 0.310127] pnp 00:00: [mem 0x000c8000-0x000c9fff window] [ 0.310130] pnp 00:00: [mem 0x000ca000-0x000cbfff window] [ 0.310132] pnp 00:00: [mem 0x000cc000-0x000cdfff window] [ 0.310135] pnp 00:00: [mem 0x000ce000-0x000cffff window] [ 0.310138] pnp 00:00: [mem 0x000d0000-0x000d1fff window] [ 0.310141] pnp 00:00: [mem 0x000d2000-0x000d3fff window] [ 0.310144] pnp 00:00: [mem 0x000d4000-0x000d5fff window] [ 0.310147] pnp 00:00: [mem 0x000d6000-0x000d7fff window] [ 0.310150] pnp 00:00: [mem 0x000d8000-0x000d9fff window] [ 0.310153] pnp 00:00: [mem 0x000da000-0x000dbfff window] [ 0.310156] pnp 00:00: [mem 0x000dc000-0x000ddfff window] [ 0.310158] pnp 00:00: [mem 0x000de000-0x000dffff window] [ 0.310161] pnp 00:00: [mem 0x000e0000-0x000e1fff window] [ 0.310164] pnp 00:00: [mem 0x000e2000-0x000e3fff window] [ 0.310167] pnp 00:00: [mem 0x000e4000-0x000e5fff window] [ 0.310170] pnp 00:00: [mem 0x000e6000-0x000e7fff window] [ 0.310173] pnp 00:00: [mem 0x000e8000-0x000e9fff window] [ 0.310176] pnp 00:00: [mem 0x000ea000-0x000ebfff window] [ 0.310179] pnp 00:00: [mem 0x000ec000-0x000edfff window] [ 0.310183] pnp 00:00: [mem 0x000ee000-0x000effff window] [ 0.310186] pnp 00:00: [mem 0x60000000-0xdfffffff window] [ 0.310189] pnp 00:00: [mem 0xf0000000-0xffffffff window] [ 0.310192] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.310194] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.310197] pnp 00:00: [io 0x0d00-0xffff window] [ 0.310356] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.310420] pnp 00:01: [mem 0xfec00000-0xfec00fff] [ 0.310424] pnp 00:01: [mem 0xfee00000-0xfee00fff] [ 0.310571] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.310973] pnp 00:02: [io 0x0000-0x001f] [ 0.310977] pnp 00:02: [io 0x0080-0x008f] [ 0.310979] pnp 00:02: [io 0x00c0-0x00df] [ 0.310983] pnp 00:02: [dma 4] [ 0.311111] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.311124] pnp 00:03: [io 0x00f0-0x00fe] [ 0.311136] pnp 00:03: [irq 13] [ 0.311235] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.311249] pnp 00:04: [io 0x0070-0x0071] [ 0.311256] pnp 00:04: [irq 8] [ 0.311347] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.311359] pnp 00:05: [io 0x0061] [ 0.311460] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.311474] pnp 00:06: [io 0x0060] [ 0.311477] pnp 00:06: [io 0x0064] [ 0.311483] pnp 00:06: [irq 1] [ 0.311575] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.311591] pnp 00:07: [irq 12] [ 0.311691] pnp 00:07: Plug and Play ACPI device, IDs SYN1909 SYN1900 SYN0002 PNP0f13 (active) [ 0.311713] pnp 00:08: [io 0x0022-0x0023] [ 0.311717] pnp 00:08: [io 0x002e-0x002f] [ 0.311720] pnp 00:08: [io 0x0072-0x0073] [ 0.311722] pnp 00:08: [io 0x1080] [ 0.311725] pnp 00:08: [io 0x00b0-0x00b1] [ 0.311728] pnp 00:08: [io 0x0092] [ 0.311730] pnp 00:08: [io 0x0068] [ 0.311733] pnp 00:08: [io 0x006c] [ 0.311736] pnp 00:08: [io 0x0220-0x022f] [ 0.311739] pnp 00:08: [io 0x040b] [ 0.311741] pnp 00:08: [io 0x04d0-0x04d1] [ 0.311744] pnp 00:08: [io 0x04d6] [ 0.311747] pnp 00:08: [io 0x0530-0x0537] [ 0.311750] pnp 00:08: [io 0x0c00-0x0c01] [ 0.311752] pnp 00:08: [io 0x0c14] [ 0.311755] pnp 00:08: [io 0x0c50-0x0c52] [ 0.311758] pnp 00:08: [io 0x0c6c] [ 0.311760] pnp 00:08: [io 0x0c6f] [ 0.311763] pnp 00:08: [io 0x0cd0-0x0cd1] [ 0.311766] pnp 00:08: [io 0x0cd2-0x0cd3] [ 0.311769] pnp 00:08: [io 0x0cd4-0x0cd5] [ 0.311775] pnp 00:08: [io 0x0cd6-0x0cd7] [ 0.311778] pnp 00:08: [io 0x0cd8-0x0cdf] [ 0.311780] pnp 00:08: [io 0xfe00] [ 0.311783] pnp 00:08: [io 0x8000-0x805f] [ 0.311786] pnp 00:08: [io 0x8100-0x81ff window] [ 0.311789] pnp 00:08: [io 0x8200-0x82ff window] [ 0.311792] pnp 00:08: [io 0x0f40-0x0f47] [ 0.311795] pnp 00:08: [io 0x087f] [ 0.311971] pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.312059] pnp 00:09: [mem 0x000e0000-0x000fffff] [ 0.312062] pnp 00:09: [mem 0xff800000-0xff80ffff] [ 0.312066] pnp 00:09: [mem 0xfff00000-0xffffffff] [ 0.312069] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.312212] pnp 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.312328] pnp 00:0a: [mem 0xfed00000-0xfed003ff] [ 0.312439] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.313929] pnp: PnP ACPI: found 11 devices [ 0.313978] ACPI: ACPI bus type pnp unregistered [ 0.314048] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.314095] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.314148] system 00:08: [io 0x1080] has been reserved [ 0.314193] system 00:08: [io 0x0220-0x022f] has been reserved [ 0.314239] system 00:08: [io 0x040b] has been reserved [ 0.314285] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.314331] system 00:08: [io 0x04d6] has been reserved [ 0.314376] system 00:08: [io 0x0530-0x0537] has been reserved [ 0.314422] system 00:08: [io 0x0c00-0x0c01] has been reserved [ 0.314468] system 00:08: [io 0x0c14] has been reserved [ 0.314512] system 00:08: [io 0x0c50-0x0c52] has been reserved [ 0.314558] system 00:08: [io 0x0c6c] has been reserved [ 0.314603] system 00:08: [io 0x0c6f] has been reserved [ 0.314648] system 00:08: [io 0x0cd0-0x0cd1] has been reserved [ 0.314694] system 00:08: [io 0x0cd2-0x0cd3] has been reserved [ 0.314739] system 00:08: [io 0x0cd4-0x0cd5] has been reserved [ 0.314786] system 00:08: [io 0x0cd6-0x0cd7] has been reserved [ 0.314832] system 00:08: [io 0x0cd8-0x0cdf] has been reserved [ 0.314878] system 00:08: [io 0xfe00] has been reserved [ 0.314924] system 00:08: [io 0x8000-0x805f] has been reserved [ 0.314970] system 00:08: [io 0x8100-0x81ff window] has been reserved [ 0.315024] system 00:08: [io 0x8200-0x82ff window] has been reserved [ 0.315070] system 00:08: [io 0x0f40-0x0f47] has been reserved [ 0.315116] system 00:08: [io 0x087f] has been reserved [ 0.315164] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.315211] system 00:09: [mem 0xff800000-0xff80ffff] has been reserved [ 0.315257] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved [ 0.326742] pci 0000:00:04.0: BAR 8: assigned [mem 0xffd00000-0xffefffff] [ 0.326808] pci 0000:00:04.0: BAR 9: assigned [mem 0xffb00000-0xffcfffff 64bit pref] [ 0.326870] pci 0000:00:05.0: BAR 9: assigned [mem 0xffa00000-0xffafffff pref] [ 0.326921] pci 0000:00:06.0: BAR 8: assigned [mem 0xff600000-0xff7fffff] [ 0.326978] pci 0000:00:06.0: BAR 9: assigned [mem 0xff400000-0xff5fffff 64bit pref] [ 0.327047] pci 0000:00:04.0: BAR 7: assigned [io 0xe000-0xefff] [ 0.327094] pci 0000:00:06.0: BAR 7: assigned [io 0xd000-0xdfff] [ 0.327140] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.327185] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] [ 0.327231] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf81fffff] [ 0.327278] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.327329] pci 0000:00:04.0: PCI bridge to [bus 02-07] [ 0.327375] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] [ 0.327421] pci 0000:00:04.0: bridge window [mem 0xffd00000-0xffefffff] [ 0.327467] pci 0000:00:04.0: bridge window [mem 0xffb00000-0xffcfffff 64bit pref] [ 0.327519] pci 0000:08:00.0: BAR 6: assigned [mem 0xffae0000-0xffafffff pref] [ 0.327568] pci 0000:00:05.0: PCI bridge to [bus 08-0d] [ 0.327613] pci 0000:00:05.0: bridge window [io 0xa000-0xafff] [ 0.327659] pci 0000:00:05.0: bridge window [mem 0xf8200000-0xf82fffff] [ 0.327704] pci 0000:00:05.0: bridge window [mem 0xffa00000-0xffafffff pref] [ 0.327754] pci 0000:00:06.0: PCI bridge to [bus 0e-13] [ 0.327798] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff] [ 0.327845] pci 0000:00:06.0: bridge window [mem 0xff600000-0xff7fffff] [ 0.327890] pci 0000:00:06.0: bridge window [mem 0xff400000-0xff5fffff 64bit pref] [ 0.327941] pci 0000:00:14.4: PCI bridge to [bus 14-19] [ 0.327985] pci 0000:00:14.4: bridge window [io disabled] [ 0.328089] pci 0000:00:14.4: bridge window [mem 0xf8300000-0xf83fffff] [ 0.328136] pci 0000:00:14.4: bridge window [mem pref disabled] [ 0.328194] pci 0000:00:04.0: enabling device (0000 -> 0003) [ 0.328240] pci 0000:00:04.0: setting latency timer to 64 [ 0.328245] pci 0000:00:05.0: setting latency timer to 64 [ 0.328250] pci 0000:00:06.0: enabling device (0000 -> 0003) [ 0.328296] pci 0000:00:06.0: setting latency timer to 64 [ 0.328305] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff] [ 0.328308] pci_bus 0000:00: resource 5 [mem 0x000d0000-0x000d1fff] [ 0.328311] pci_bus 0000:00: resource 6 [mem 0x000d2000-0x000d3fff] [ 0.328314] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d5fff] [ 0.328316] pci_bus 0000:00: resource 8 [mem 0x000d6000-0x000d7fff] [ 0.328319] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000d9fff] [ 0.328322] pci_bus 0000:00: resource 10 [mem 0x000da000-0x000dbfff] [ 0.328326] pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000ddfff] [ 0.328328] pci_bus 0000:00: resource 12 [mem 0x000de000-0x000dffff] [ 0.328331] pci_bus 0000:00: resource 13 [mem 0x60000000-0xdfffffff] [ 0.328334] pci_bus 0000:00: resource 14 [mem 0xf0000000-0xffffffff] [ 0.328337] pci_bus 0000:00: resource 15 [io 0x0000-0x0cf7] [ 0.328340] pci_bus 0000:00: resource 16 [io 0x0d00-0xffff] [ 0.328343] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff] [ 0.328346] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf81fffff] [ 0.328349] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.328352] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.328355] pci_bus 0000:02: resource 1 [mem 0xffd00000-0xffefffff] [ 0.328358] pci_bus 0000:02: resource 2 [mem 0xffb00000-0xffcfffff 64bit pref] [ 0.328361] pci_bus 0000:08: resource 0 [io 0xa000-0xafff] [ 0.328364] pci_bus 0000:08: resource 1 [mem 0xf8200000-0xf82fffff] [ 0.328367] pci_bus 0000:08: resource 2 [mem 0xffa00000-0xffafffff pref] [ 0.328370] pci_bus 0000:0e: resource 0 [io 0xd000-0xdfff] [ 0.328373] pci_bus 0000:0e: resource 1 [mem 0xff600000-0xff7fffff] [ 0.328376] pci_bus 0000:0e: resource 2 [mem 0xff400000-0xff5fffff 64bit pref] [ 0.328379] pci_bus 0000:14: resource 1 [mem 0xf8300000-0xf83fffff] [ 0.328382] pci_bus 0000:14: resource 4 [mem 0x000a0000-0x000bffff] [ 0.328385] pci_bus 0000:14: resource 5 [mem 0x000d0000-0x000d1fff] [ 0.328388] pci_bus 0000:14: resource 6 [mem 0x000d2000-0x000d3fff] [ 0.328391] pci_bus 0000:14: resource 7 [mem 0x000d4000-0x000d5fff] [ 0.328394] pci_bus 0000:14: resource 8 [mem 0x000d6000-0x000d7fff] [ 0.328396] pci_bus 0000:14: resource 9 [mem 0x000d8000-0x000d9fff] [ 0.328399] pci_bus 0000:14: resource 10 [mem 0x000da000-0x000dbfff] [ 0.328402] pci_bus 0000:14: resource 11 [mem 0x000dc000-0x000ddfff] [ 0.328405] pci_bus 0000:14: resource 12 [mem 0x000de000-0x000dffff] [ 0.328408] pci_bus 0000:14: resource 13 [mem 0x60000000-0xdfffffff] [ 0.328411] pci_bus 0000:14: resource 14 [mem 0xf0000000-0xffffffff] [ 0.328413] pci_bus 0000:14: resource 15 [io 0x0000-0x0cf7] [ 0.328416] pci_bus 0000:14: resource 16 [io 0x0d00-0xffff] [ 0.328457] NET: Registered protocol family 2 [ 0.328547] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.329225] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.332518] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.333448] TCP: Hash tables configured (established 262144 bind 65536) [ 0.333498] TCP reno registered [ 0.333544] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.333617] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.333792] NET: Registered protocol family 1 [ 0.333965] pci 0000:01:05.0: Boot video device [ 0.333983] PCI: CLS 32 bytes, default 64 [ 0.336230] audit: initializing netlink socket (disabled) [ 0.336289] type=2000 audit(1291637951.335:1): initialized [ 0.336510] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.342343] VFS: Disk quotas dquot_6.5.2 [ 0.342532] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.344316] fuse init (API version 7.15) [ 0.344631] msgmni has been set to 2746 [ 0.345486] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.345538] io scheduler noop registered [ 0.345582] io scheduler deadline registered [ 0.345732] io scheduler cfq registered (default) [ 0.347442] ACPI: AC Adapter [ADP0] (on-line) [ 0.347693] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.347750] ACPI: Power Button [PWRB] [ 0.347931] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.348768] ACPI: Lid Switch [LID] [ 0.348926] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.348977] ACPI: Power Button [PWRF] [ 0.349271] ACPI: Fan [FAN1] (off) [ 0.349371] ACPI: acpi_idle registered with cpuidle [ 0.349418] ACPI: processor limited to max C-state 1 [ 0.371752] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.371802] ACPI: Thermal Zone [TZCR] (53 C) [ 0.382118] ACPI: Battery Slot [BAT0] (battery present) [ 0.382306] Initializing Nozomi driver 2.1d (build date: Dec 3 2010 11:25:48) [ 0.382931] Non-volatile memory driver v1.3 [ 0.383117] [drm] Initialized drm 1.1.0 20060810 [ 0.383236] [drm] radeon defaulting to kernel modesetting. [ 0.383281] [drm] radeon kernel modesetting enabled. [ 0.383416] radeon 0000:01:05.0: power state changed by ACPI to D0 [ 0.383468] radeon 0000:01:05.0: power state changed by ACPI to D0 [ 0.383526] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.387794] [drm] initializing kernel modesetting (RS690 0x1002:0x791F). [ 0.387915] [drm] register mmio base: 0xF8100000 [ 0.387959] [drm] register mmio size: 65536 [ 0.388120] ATOM BIOS: ATI [ 0.388188] radeon 0000:01:05.0: VRAM: 128M 0x58000000 - 0x5FFFFFFF (128M used) [ 0.388237] radeon 0000:01:05.0: GTT: 512M 0x60000000 - 0x7FFFFFFF [ 0.388333] [drm] radeon: irq initialized. [ 0.388550] [drm] Detected VRAM RAM=128M, BAR=128M [ 0.388600] [drm] RAM width 128bits DDR [ 0.388746] [TTM] Zone kernel: Available graphics memory: 703222 kiB. [ 0.388796] [TTM] Initializing pool allocator. [ 0.388860] [drm] radeon: 128M of VRAM memory ready [ 0.388903] [drm] radeon: 512M of GTT memory ready. [ 0.388970] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 0.393843] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 0.403059] radeon 0000:01:05.0: WB enabled [ 0.403254] [drm] Loading RS690/RS740 Microcode [ 0.403522] [drm] radeon: ring at 0x0000000060001000 [ 0.403586] [drm] ring test succeeded in 1 usecs [ 0.403766] [drm] radeon: ib pool ready. [ 0.403882] [drm] ib test succeeded in 0 usecs [ 0.403931] [drm] Enabling audio support [ 0.404916] [drm] Radeon Display Connectors [ 0.404962] [drm] Connector 0: [ 0.405022] [drm] VGA [ 0.405065] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c [ 0.405113] [drm] Encoders: [ 0.405155] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 0.405198] [drm] Connector 1: [ 0.405240] [drm] LVDS [ 0.405282] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c [ 0.405329] [drm] Encoders: [ 0.405372] [drm] LCD1: INTERNAL_LVTM1 [ 0.405414] [drm] Connector 2: [ 0.405456] [drm] S-video [ 0.405498] [drm] Encoders: [ 0.405539] [drm] TV1: INTERNAL_KLDSCP_DAC1 [ 1.031223] [drm] fb mappable at 0xF0040000 [ 1.031270] [drm] vram apper at 0xF0000000 [ 1.031312] [drm] size 4096000 [ 1.031354] [drm] fb depth is 24 [ 1.031396] [drm] pitch is 5120 [ 1.367593] Console: switching to colour frame buffer device 160x50 [ 1.377438] fb0: radeondrmfb frame buffer device [ 1.377440] drm: registered panic notifier [ 1.377583] [drm] Initialized radeon 2.7.0 20080528 for 0000:01:05.0 on minor 0 [ 1.377792] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.444663] brd: module loaded [ 1.446427] loop: module loaded [ 1.446840] ahci 0000:00:12.0: version 3.0 [ 1.446865] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.447024] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 1.447243] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.447367] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.449322] scsi0 : ahci [ 1.449707] scsi1 : ahci [ 1.449999] scsi2 : ahci [ 1.450306] scsi3 : ahci [ 1.450629] ata1: SATA max UDMA/133 abar m1024@0xf8609000 port 0xf8609100 irq 22 [ 1.450746] ata2: SATA max UDMA/133 abar m1024@0xf8609000 port 0xf8609180 irq 22 [ 1.450862] ata3: SATA max UDMA/133 abar m1024@0xf8609000 port 0xf8609200 irq 22 [ 1.450979] ata4: SATA max UDMA/133 abar m1024@0xf8609000 port 0xf8609280 irq 22 [ 1.451402] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.451563] pata_atiixp 0000:00:14.1: setting latency timer to 64 [ 1.452468] scsi4 : pata_atiixp [ 1.452762] scsi5 : pata_atiixp [ 1.453537] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14 [ 1.453647] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15 [ 1.454119] PPP generic driver version 2.4.2 [ 1.454370] PPP Deflate Compression module registered [ 1.457118] PPP BSD Compression module registered [ 1.459908] PPP MPPE Compression module registered [ 1.462643] NET: Registered protocol family 24 [ 1.465407] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.468237] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.471084] r8169 0000:08:00.0: setting latency timer to 64 [ 1.471140] r8169 0000:08:00.0: irq 40 for MSI/MSI-X [ 1.471412] r8169 0000:08:00.0: eth0: RTL8101e at 0xffffc90000010000, 00:a0:d1:84:f0:e3, XID 94200000 IRQ 40 [ 1.480171] usbcore: registered new interface driver rtl8187 [ 1.483147] firewire_ohci 0000:14:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.537107] firewire_ohci: Added fw-ohci device 0000:14:06.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 [ 1.540699] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.543799] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 1.543891] ehci_hcd 0000:00:13.5: power state changed by ACPI to D0 [ 1.548232] ehci_hcd 0000:00:13.5: power state changed by ACPI to D0 [ 1.551273] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.554337] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 1.557387] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 1.568031] ehci_hcd 0000:00:13.5: reset hcs_params 0x10520a dbg=1 cc=5 pcc=2 ordered !ppc ports=10 [ 1.568037] ehci_hcd 0000:00:13.5: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 1.568074] ehci_hcd 0000:00:13.5: debug port 1 [ 1.571144] ehci_hcd 0000:00:13.5: reset command 0080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT [ 1.571153] ehci_hcd 0000:00:13.5: MWI active [ 1.571156] ehci_hcd 0000:00:13.5: supports USB remote wakeup [ 1.571177] ehci_hcd 0000:00:13.5: irq 19, io mem 0xf8609400 [ 1.574279] ehci_hcd 0000:00:13.5: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.574288] ehci_hcd 0000:00:13.5: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 1.580032] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 1.583195] usb usb1: default language 0x0409 [ 1.583203] usb usb1: udev 1, busnum 1, minor = 0 [ 1.583206] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.586349] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.589517] usb usb1: Product: EHCI Host Controller [ 1.592671] usb usb1: Manufacturer: Linux 2.6.37-rc4-00153-g59e57c6-dirty ehci_hcd [ 1.595938] usb usb1: SerialNumber: 0000:00:13.5 [ 1.599374] usb usb1: usb_probe_device [ 1.599378] usb usb1: configuration #1 chosen from 1 choice [ 1.599389] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.599494] hub 1-0:1.0: usb_probe_interface [ 1.599497] hub 1-0:1.0: usb_probe_interface - got id [ 1.599501] hub 1-0:1.0: USB hub found [ 1.602768] hub 1-0:1.0: 10 ports detected [ 1.606031] hub 1-0:1.0: standalone hub [ 1.606033] hub 1-0:1.0: no power switching (usb 1.0) [ 1.606036] hub 1-0:1.0: individual port over-current protection [ 1.606040] hub 1-0:1.0: power on to power good time: 20ms [ 1.606045] hub 1-0:1.0: local power source is good [ 1.606049] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.606305] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.609597] ohci_hcd: block sizes: ed 80 td 96 [ 1.609627] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.612975] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.616250] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 1.625518] ata5.00: ATAPI: TSSTcorp CDDVDW TS-L632H, TO01, max UDMA/33 [ 1.628850] ohci_hcd 0000:00:13.0: created debug files [ 1.628853] ohci_hcd 0000:00:13.0: supports USB remote wakeup [ 1.628872] ohci_hcd 0000:00:13.0: irq 16, io mem 0xf8604000 [ 1.650451] ata5.00: configured for UDMA/33 [ 1.683048] ohci_hcd 0000:00:13.0: OHCI controller state [ 1.683053] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers [ 1.683060] ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3 [ 1.683065] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0 [ 1.683070] ohci_hcd 0000:00:13.0: intrstatus 0x00000000 [ 1.683075] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.683087] ohci_hcd 0000:00:13.0: hcca frame #0000 [ 1.683092] ohci_hcd 0000:00:13.0: roothub.a 00000202 POTPGT=0 NPS NDP=2(2) [ 1.683097] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.683101] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE [ 1.683106] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS [ 1.683111] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS [ 1.683132] usb usb2: default language 0x0409 [ 1.683140] usb usb2: udev 1, busnum 2, minor = 128 [ 1.683143] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.686454] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.689754] usb usb2: Product: OHCI Host Controller [ 1.692982] usb usb2: Manufacturer: Linux 2.6.37-rc4-00153-g59e57c6-dirty ohci_hcd [ 1.696328] usb usb2: SerialNumber: 0000:00:13.0 [ 1.699897] usb usb2: usb_probe_device [ 1.699901] usb usb2: configuration #1 chosen from 1 choice [ 1.699913] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 1.700027] hub 2-0:1.0: usb_probe_interface [ 1.700030] hub 2-0:1.0: usb_probe_interface - got id [ 1.700034] hub 2-0:1.0: USB hub found [ 1.703460] hub 2-0:1.0: 2 ports detected [ 1.706052] ehci_hcd 0000:00:13.5: GetStatus port:6 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.706056] hub 1-0:1.0: port 6: status 0501 change 0001 [ 1.706068] ehci_hcd 0000:00:13.5: GetStatus port:7 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.706071] hub 1-0:1.0: port 7: status 0501 change 0001 [ 1.706081] ehci_hcd 0000:00:13.5: GetStatus port:8 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.706084] hub 1-0:1.0: port 8: status 0501 change 0001 [ 1.706886] hub 2-0:1.0: standalone hub [ 1.706889] hub 2-0:1.0: no power switching (usb 1.0) [ 1.706891] hub 2-0:1.0: global over-current protection [ 1.706895] hub 2-0:1.0: power on to power good time: 0ms [ 1.706902] hub 2-0:1.0: local power source is good [ 1.706905] hub 2-0:1.0: no over-current condition exists [ 1.706909] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 1.706985] ehci_hcd 0000:00:13.5: HS companion for 0000:00:13.0 [ 1.707041] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.710535] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.714030] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 1.726060] ohci_hcd 0000:00:13.1: created debug files [ 1.726062] ohci_hcd 0000:00:13.1: supports USB remote wakeup [ 1.726086] ohci_hcd 0000:00:13.1: irq 17, io mem 0xf8605000 [ 1.758049] ata3: SATA link down (SStatus 0 SControl 300) [ 1.761575] ata4: SATA link down (SStatus 0 SControl 300) [ 1.765118] ata2: SATA link down (SStatus 0 SControl 300) [ 1.780048] ohci_hcd 0000:00:13.1: OHCI controller state [ 1.780053] ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers [ 1.780060] ohci_hcd 0000:00:13.1: control 0x283 RWC HCFS=operational CBSR=3 [ 1.780065] ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0 [ 1.780072] ohci_hcd 0000:00:13.1: intrstatus 0x00000000 [ 1.780076] ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.780088] ohci_hcd 0000:00:13.1: hcca frame #0000 [ 1.780093] ohci_hcd 0000:00:13.1: roothub.a 00000202 POTPGT=0 NPS NDP=2(2) [ 1.780098] ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.780102] ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE [ 1.780107] ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS [ 1.780112] ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS [ 1.780127] usb usb3: default language 0x0409 [ 1.780135] usb usb3: udev 1, busnum 3, minor = 256 [ 1.780138] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.783651] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.787130] usb usb3: Product: OHCI Host Controller [ 1.790610] usb usb3: Manufacturer: Linux 2.6.37-rc4-00153-g59e57c6-dirty ohci_hcd [ 1.794117] usb usb3: SerialNumber: 0000:00:13.1 [ 1.797802] usb usb3: usb_probe_device [ 1.797805] usb usb3: configuration #1 chosen from 1 choice [ 1.797815] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 1.797912] hub 3-0:1.0: usb_probe_interface [ 1.797915] hub 3-0:1.0: usb_probe_interface - got id [ 1.797918] hub 3-0:1.0: USB hub found [ 1.801447] hub 3-0:1.0: 2 ports detected [ 1.804932] hub 3-0:1.0: standalone hub [ 1.804935] hub 3-0:1.0: no power switching (usb 1.0) [ 1.804938] hub 3-0:1.0: global over-current protection [ 1.804941] hub 3-0:1.0: power on to power good time: 0ms [ 1.804949] hub 3-0:1.0: local power source is good [ 1.804951] hub 3-0:1.0: no over-current condition exists [ 1.804955] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 1.805044] ehci_hcd 0000:00:13.5: HS companion for 0000:00:13.1 [ 1.805079] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.806042] hub 1-0:1.0: state 7 ports 10 chg 01c0 evt 0000 [ 1.806049] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 1.811477] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 1.814979] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 1.823049] ohci_hcd 0000:00:13.2: created debug files [ 1.823052] ohci_hcd 0000:00:13.2: supports USB remote wakeup [ 1.823062] ohci_hcd 0000:00:13.2: irq 18, io mem 0xf8606000 [ 1.857040] ehci_hcd 0000:00:13.5: port 6 high speed [ 1.857045] ehci_hcd 0000:00:13.5: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.877051] ohci_hcd 0000:00:13.2: OHCI controller state [ 1.877056] ohci_hcd 0000:00:13.2: OHCI 1.0, NO legacy support registers [ 1.877063] ohci_hcd 0000:00:13.2: control 0x283 RWC HCFS=operational CBSR=3 [ 1.877068] ohci_hcd 0000:00:13.2: cmdstatus 0x00000 SOC=0 [ 1.877075] ohci_hcd 0000:00:13.2: intrstatus 0x00000000 [ 1.877079] ohci_hcd 0000:00:13.2: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.877091] ohci_hcd 0000:00:13.2: hcca frame #0000 [ 1.877096] ohci_hcd 0000:00:13.2: roothub.a 00000202 POTPGT=0 NPS NDP=2(2) [ 1.877100] ohci_hcd 0000:00:13.2: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.877105] ohci_hcd 0000:00:13.2: roothub.status 00008000 DRWE [ 1.877110] ohci_hcd 0000:00:13.2: roothub.portstatus [0] 0x00000100 PPS [ 1.877115] ohci_hcd 0000:00:13.2: roothub.portstatus [1] 0x00000100 PPS [ 1.877127] usb usb4: default language 0x0409 [ 1.877136] usb usb4: udev 1, busnum 4, minor = 384 [ 1.877139] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.880516] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.883839] usb usb4: Product: OHCI Host Controller [ 1.887131] usb usb4: Manufacturer: Linux 2.6.37-rc4-00153-g59e57c6-dirty ohci_hcd [ 1.890537] usb usb4: SerialNumber: 0000:00:13.2 [ 1.894047] usb usb4: usb_probe_device [ 1.894050] usb usb4: configuration #1 chosen from 1 choice [ 1.894061] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 1.894161] hub 4-0:1.0: usb_probe_interface [ 1.894164] hub 4-0:1.0: usb_probe_interface - got id [ 1.894168] hub 4-0:1.0: USB hub found [ 1.897555] hub 4-0:1.0: 2 ports detected [ 1.900886] hub 4-0:1.0: standalone hub [ 1.900889] hub 4-0:1.0: no power switching (usb 1.0) [ 1.900891] hub 4-0:1.0: global over-current protection [ 1.900894] hub 4-0:1.0: power on to power good time: 0ms [ 1.900901] hub 4-0:1.0: local power source is good [ 1.900904] hub 4-0:1.0: no over-current condition exists [ 1.900907] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 1.900979] ehci_hcd 0000:00:13.5: HS companion for 0000:00:13.2 [ 1.901022] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.904467] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 1.907878] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 1.908041] usb 1-6: new high speed USB device using ehci_hcd and address 2 [ 1.918056] ohci_hcd 0000:00:13.3: created debug files [ 1.918059] ohci_hcd 0000:00:13.3: supports USB remote wakeup [ 1.918070] ohci_hcd 0000:00:13.3: irq 17, io mem 0xf8607000 [ 1.959076] ehci_hcd 0000:00:13.5: port 6 high speed [ 1.959081] ehci_hcd 0000:00:13.5: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.972051] ohci_hcd 0000:00:13.3: OHCI controller state [ 1.972057] ohci_hcd 0000:00:13.3: OHCI 1.0, NO legacy support registers [ 1.972064] ohci_hcd 0000:00:13.3: control 0x283 RWC HCFS=operational CBSR=3 [ 1.972069] ohci_hcd 0000:00:13.3: cmdstatus 0x00000 SOC=0 [ 1.972075] ohci_hcd 0000:00:13.3: intrstatus 0x00000000 [ 1.972080] ohci_hcd 0000:00:13.3: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.972092] ohci_hcd 0000:00:13.3: hcca frame #0000 [ 1.972097] ohci_hcd 0000:00:13.3: roothub.a 00000202 POTPGT=0 NPS NDP=2(2) [ 1.972102] ohci_hcd 0000:00:13.3: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.972107] ohci_hcd 0000:00:13.3: roothub.status 00008000 DRWE [ 1.972113] ohci_hcd 0000:00:13.3: roothub.portstatus [0] 0x00000100 PPS [ 1.972118] ohci_hcd 0000:00:13.3: roothub.portstatus [1] 0x00000100 PPS [ 1.972131] usb usb5: default language 0x0409 [ 1.972140] usb usb5: udev 1, busnum 5, minor = 512 [ 1.972143] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.975630] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.979072] usb usb5: Product: OHCI Host Controller [ 1.982500] usb usb5: Manufacturer: Linux 2.6.37-rc4-00153-g59e57c6-dirty ohci_hcd [ 1.985993] usb usb5: SerialNumber: 0000:00:13.3 [ 1.989629] usb usb5: usb_probe_device [ 1.989633] usb usb5: configuration #1 chosen from 1 choice [ 1.989642] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 1.989737] hub 5-0:1.0: usb_probe_interface [ 1.989740] hub 5-0:1.0: usb_probe_interface - got id [ 1.989742] hub 5-0:1.0: USB hub found [ 1.993228] hub 5-0:1.0: 2 ports detected [ 1.996628] hub 5-0:1.0: standalone hub [ 1.996630] hub 5-0:1.0: no power switching (usb 1.0) [ 1.996633] hub 5-0:1.0: global over-current protection [ 1.996635] hub 5-0:1.0: power on to power good time: 0ms [ 1.996641] hub 5-0:1.0: local power source is good [ 1.996645] hub 5-0:1.0: no over-current condition exists [ 1.996648] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 1.996718] ehci_hcd 0000:00:13.5: HS companion for 0000:00:13.3 [ 1.996755] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.000292] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 2.003784] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 2.015048] ohci_hcd 0000:00:13.4: created debug files [ 2.015059] ohci_hcd 0000:00:13.4: irq 18, io mem 0xf8608000 [ 2.023870] usb 1-6: default language 0x0409 [ 2.037123] usb 1-6: udev 2, busnum 1, minor = 1 [ 2.037126] usb 1-6: New USB device found, idVendor=0bda, idProduct=8197 [ 2.040613] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.044033] usb 1-6: Manufacturer: Manufacturer_Realtek [ 2.047456] usb 1-6: SerialNumber: 00e04c000001 [ 2.051018] firewire_core: created device fw0: GUID 00080da0d184f0e3, S400 [ 2.054501] usb 1-6: usb_probe_device [ 2.054504] usb 1-6: configuration #1 chosen from 1 choice [ 2.055251] usb 1-6: adding 1-6:1.0 (config #1, interface 0) [ 2.065465] rtl8187 1-6:1.0: usb_probe_interface [ 2.065468] rtl8187 1-6:1.0: usb_probe_interface - got id [ 2.069048] ohci_hcd 0000:00:13.4: OHCI controller state [ 2.069053] ohci_hcd 0000:00:13.4: OHCI 1.0, NO legacy support registers [ 2.069059] ohci_hcd 0000:00:13.4: control 0x083 HCFS=operational CBSR=3 [ 2.069063] ohci_hcd 0000:00:13.4: cmdstatus 0x00000 SOC=0 [ 2.069068] ohci_hcd 0000:00:13.4: intrstatus 0x00000000 [ 2.069073] ohci_hcd 0000:00:13.4: intrenable 0x8000005a MIE RHSC UE RD WDH [ 2.069085] ohci_hcd 0000:00:13.4: hcca frame #0000 [ 2.069090] ohci_hcd 0000:00:13.4: roothub.a 00000202 POTPGT=0 NPS NDP=2(2) [ 2.069095] ohci_hcd 0000:00:13.4: roothub.b 00000000 PPCM=0000 DR=0000 [ 2.069099] ohci_hcd 0000:00:13.4: roothub.status 00008000 DRWE [ 2.069104] ohci_hcd 0000:00:13.4: roothub.portstatus [0] 0x00000100 PPS [ 2.069109] ohci_hcd 0000:00:13.4: roothub.portstatus [1] 0x00000100 PPS [ 2.069123] usb usb6: default language 0x0409 [ 2.069131] usb usb6: udev 1, busnum 6, minor = 640 [ 2.069134] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.071023] ata1: softreset failed (device not ready) [ 2.071026] ata1: applying SB600 PMP SRST workaround and retrying [ 2.079874] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.083516] usb usb6: Product: OHCI Host Controller [ 2.087129] usb usb6: Manufacturer: Linux 2.6.37-rc4-00153-g59e57c6-dirty ohci_hcd [ 2.090808] usb usb6: SerialNumber: 0000:00:13.4 [ 2.094593] usb usb6: usb_probe_device [ 2.094596] usb usb6: configuration #1 chosen from 1 choice [ 2.094607] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 2.094696] hub 6-0:1.0: usb_probe_interface [ 2.094699] hub 6-0:1.0: usb_probe_interface - got id [ 2.094703] hub 6-0:1.0: USB hub found [ 2.098364] hub 6-0:1.0: 2 ports detected [ 2.102041] hub 6-0:1.0: standalone hub [ 2.102043] hub 6-0:1.0: no power switching (usb 1.0) [ 2.102046] hub 6-0:1.0: global over-current protection [ 2.102049] hub 6-0:1.0: power on to power good time: 0ms [ 2.102056] hub 6-0:1.0: local power source is good [ 2.102059] hub 6-0:1.0: no over-current condition exists [ 2.102062] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 2.102130] ehci_hcd 0000:00:13.5: HS companion for 0000:00:13.4 [ 2.102226] uhci_hcd: USB Universal Host Controller Interface driver [ 2.106319] usbcore: registered new interface driver usblp [ 2.110085] Initializing USB Mass Storage driver... [ 2.113929] usbcore: registered new interface driver usb-storage [ 2.117693] USB Mass Storage support registered. [ 2.121519] usbcore: registered new interface driver libusual [ 2.125428] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 2.132528] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.136286] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.140224] mice: PS/2 mouse device common for all mice [ 2.144352] rtc_cmos 00:04: RTC can wake from S4 [ 2.151192] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.155018] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 2.158848] i2c /dev entries driver [ 2.163181] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0 [ 2.167093] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.171061] Linux video capture interface: v2.00 [ 2.175022] usbcore: registered new interface driver uvcvideo [ 2.178884] USB Video Class driver (v1.0.0) [ 2.182764] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 2.186878] Bluetooth: Virtual HCI driver ver 1.3 [ 2.190943] Bluetooth: HCI UART driver ver 2.2 [ 2.194777] Bluetooth: HCI H4 protocol initialized [ 2.198530] Bluetooth: HCI BCSP protocol initialized [ 2.202249] Bluetooth: HCILL protocol initialized [ 2.205930] Bluetooth: Broadcom Blutonium firmware driver ver 1.2 [ 2.209839] usbcore: registered new interface driver bcm203x [ 2.213600] Bluetooth: Digianswer Bluetooth USB driver ver 0.10 [ 2.217335] usbcore: registered new interface driver bpa10x [ 2.220981] Bluetooth: BlueFRITZ! USB driver ver 1.2 [ 2.224832] usbcore: registered new interface driver bfusb [ 2.228513] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 2.228534] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.235932] usbcore: registered new interface driver btusb [ 2.239855] cpuidle: using governor ladder [ 2.243672] cpuidle: using governor menu [ 2.247467] sdhci: Secure Digital Host Controller Interface driver [ 2.251249] sdhci: Copyright(c) Pierre Ossman [ 2.255025] sdhci-pci 0000:14:06.1: SDHCI controller found [1180:0822] (rev 22) [ 2.258865] sdhci-pci 0000:14:06.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.263679] sdhci-pci 0000:14:06.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 2.267527] sdhci-pci 0000:14:06.1: setting latency timer to 64 [ 2.268655] Registered led device: mmc0:: [ 2.269762] mmc0: SDHCI controller on PCI [0000:14:06.1] using DMA [ 2.274799] usbcore: registered new interface driver usbhid [ 2.278623] usbhid: USB HID core driver [ 2.282387] zram: num_devices not specified. Using default: 1 [ 2.286167] zram: Creating 1 devices ... [ 2.291018] Detected Toshiba ACPI Bluetooth device - installing RFKill handler [ 2.300419] toshiba_bluetooth: Re-enabling Toshiba Bluetooth [ 2.317142] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.346733] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4 [ 2.350733] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 2.355567] ALSA device list: [ 2.359337] #0: HDA ATI SB at 0xf8600000 irq 16 [ 2.363094] Netfilter messages via NETLINK v0.30. [ 2.366944] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 2.379365] ctnetlink v0.93: registering with nfnetlink. [ 2.383295] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.387042] TCP cubic registered [ 2.390761] NET: Registered protocol family 17 [ 2.394682] Bluetooth: L2CAP ver 2.15 [ 2.398426] Bluetooth: L2CAP socket layer initialized [ 2.402172] Bluetooth: SCO (Voice Link) ver 0.6 [ 2.405869] Bluetooth: SCO socket layer initialized [ 2.409733] Bluetooth: RFCOMM TTY layer initialized [ 2.413461] Bluetooth: RFCOMM socket layer initialized [ 2.417122] Bluetooth: RFCOMM ver 1.11 [ 2.420544] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.424086] Bluetooth: BNEP filters: protocol multicast [ 2.427558] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.441258] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 (2 cpu cores) (version 2.20.00) [ 2.444781] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x13 [ 2.448225] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x14 [ 2.451664] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1a [ 2.477809] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 2.478255] ieee80211 phy0: hwaddr 00:c0:a8:ff:54:49, RTL8187BvE V0 + rtl8225z2, rfkill mask 2 [ 2.514078] rtl8187: Customer ID is 0x04 [ 2.517701] Registered led device: rtl8187-phy0::radio [ 2.517789] Registered led device: rtl8187-phy0::tx [ 2.517868] Registered led device: rtl8187-phy0::rx [ 2.518564] rtl8187: wireless switch is on [ 2.522231] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s [ 2.563668] ata1.00: ATA-7: TOSHIBA MK1237GSX, DL130M, max UDMA/100 [ 2.567175] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.570699] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.574232] ehci_hcd 0000:00:13.5: port 7 full speed --> companion [ 2.574240] ehci_hcd 0000:00:13.5: GetStatus port:7 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 2.574287] hub 1-0:1.0: port 7 not reset yet, waiting 50ms [ 2.575121] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.578593] ata1.00: configured for UDMA/100 [ 2.593212] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1237GS DL13 PQ: 0 ANSI: 5 [ 2.597127] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 2.597243] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.601464] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632H TO01 PQ: 0 ANSI: 5 [ 2.608272] sd 0:0:0:0: [sda] Write Protect is off [ 2.612024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.612045] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.617334] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.621071] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.625044] ehci_hcd 0000:00:13.5: GetStatus port:7 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 2.625050] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.625076] hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s [ 2.625283] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 2.644102] sda: sda1 sda2 sda3 sda4 [ 2.648403] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.676079] ehci_hcd 0000:00:13.5: port 8 high speed [ 2.676084] ehci_hcd 0000:00:13.5: GetStatus port:8 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.704035] ohci_hcd 0000:00:13.0: auto-stop root hub [ 2.727037] usb 1-8: new high speed USB device using ehci_hcd and address 4 [ 2.781085] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04713/0x204000/0x0 [ 2.784800] synaptics: Toshiba Satellite A210 detected, limiting rate to 40pps. [ 2.784847] ehci_hcd 0000:00:13.5: port 8 high speed [ 2.784852] ehci_hcd 0000:00:13.5: GetStatus port:8 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.822648] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 2.856246] usb 1-8: skipped 1 descriptor after configuration [ 2.856250] usb 1-8: skipped 5 descriptors after interface [ 2.856254] usb 1-8: skipped 1 descriptor after endpoint [ 2.856257] usb 1-8: skipped 10 descriptors after interface [ 2.856740] usb 1-8: default language 0x0409 [ 2.861367] usb 1-8: udev 4, busnum 1, minor = 3 [ 2.861370] usb 1-8: New USB device found, idVendor=04f2, idProduct=b008 [ 2.865075] usb 1-8: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 2.867615] registered taskstats version 1 [ 2.872489] usb 1-8: Product: Chicony USB 2.0 Camera [ 2.876116] usb 1-8: Manufacturer: Chicony Electronics Co., Ltd. [ 2.879752] usb 1-8: SerialNumber: SN0001 [ 2.883482] usb 1-8: usb_probe_device [ 2.883486] usb 1-8: configuration #1 chosen from 1 choice [ 2.883752] usb 1-8: adding 1-8:1.0 (config #1, interface 0) [ 2.885456] uvcvideo 1-8:1.0: usb_probe_interface [ 2.885460] uvcvideo 1-8:1.0: usb_probe_interface - got id [ 2.885478] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008) [ 2.892655] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:13.5/usb1/1-8/1-8:1.0/input/input7 [ 2.896547] usb 1-8: adding 1-8:1.1 (config #1, interface 1) [ 2.896684] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.896689] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.896693] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.896697] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 2.896705] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS [ 2.896712] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 2.919403] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.923211] VFS: Mounted root (ext2 filesystem) readonly on device 8:2. [ 2.926986] Freeing unused kernel memory: 436k freed [ 2.954045] ohci_hcd 0000:00:13.1: auto-stop root hub [ 2.954061] ohci_hcd 0000:00:13.2: auto-stop root hub [ 3.001044] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 3.063041] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS [ 3.114038] usb 5-1: new full speed USB device using ohci_hcd and address 2 [ 3.186041] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS [ 3.204047] ohci_hcd 0000:00:13.4: auto-stop root hub [ 3.282112] usb 5-1: skipped 1 descriptor after interface [ 3.282119] usb 5-1: udev 2, busnum 5, minor = 513 [ 3.282122] usb 5-1: New USB device found, idVendor=0930, idProduct=0508 [ 3.286055] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.290225] usb 5-1: usb_probe_device [ 3.290229] usb 5-1: configuration #1 chosen from 1 choice [ 3.292096] usb 5-1: adding 5-1:1.0 (config #1, interface 0) [ 3.292213] btusb 5-1:1.0: usb_probe_interface [ 3.292216] btusb 5-1:1.0: usb_probe_interface - got id [ 3.292604] usb 5-1: adding 5-1:1.1 (config #1, interface 1) [ 3.292747] usb 5-1: adding 5-1:1.2 (config #1, interface 2) [ 3.292853] btusb 5-1:1.2: usb_probe_interface [ 3.292856] btusb 5-1:1.2: usb_probe_interface - got id [ 3.292891] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.292896] hub 1-0:1.0: state 7 ports 10 chg 0000 evt f880 [ 3.292912] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 3.552522] firewire_net: firewire0: IPv4 over FireWire on device 00080da0d184f0e3 [ 3.556608] firewire_core: refreshed device fw0 [ 6.099541] udev[1107]: starting version 164 [ 6.314057] usb 1-8: link qh4-0001/ffff880052dd4780 start 1 [1/0 us] [ 6.314126] usb 1-8: unlink qh4-0001/ffff880052dd4780 start 1 [1/0 us] [ 9.322533] EXT4-fs (sda2): re-mounted. Opts: (null) [ 9.503208] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 9.662667] Adding 2000088k swap on /dev/sda3. Priority:-1 extents:1 across:2000088k [ 14.427982] r8169 0000:08:00.0: eth0: link down [ 18.176489] ieee80211 phy0: device now idle [ 18.433720] ieee80211 phy0: device no longer idle - scanning [ 20.352437] ieee80211 phy0: device now idle [ 26.354889] start_kdeinit (2109): /proc/2109/oom_adj is deprecated, please use /proc/2109/oom_score_adj instead. [ 32.973398] ieee80211 phy0: device no longer idle - scanning [ 33.294501] EXT4-fs (sda4): re-mounted. Opts: commit=0 [ 34.901305] ieee80211 phy0: device now idle [ 35.005582] ieee80211 phy0: device no longer idle - working [ 35.063327] wlan0: authenticate with 00:1c:10:b8:e3:ea (try 1) [ 35.066072] wlan0: authenticated [ 35.066088] ieee80211 phy0: device now idle [ 35.118828] ieee80211 phy0: device no longer idle - working [ 35.170344] wlan0: associate with 00:1c:10:b8:e3:ea (try 1) [ 35.172602] wlan0: RX AssocResp from 00:1c:10:b8:e3:ea (capab=0x401 status=0 aid=6) [ 35.172607] wlan0: associated [ 35.172620] ieee80211 phy0: Allocated STA 00:1c:10:b8:e3:ea [ 35.172881] ieee80211 phy0: Inserted STA 00:1c:10:b8:e3:ea [ 35.172886] ieee80211 phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0 [ 35.173094] ieee80211 phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0 [ 35.173337] ieee80211 phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0 [ 35.173595] ieee80211 phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0 [ 73.078722] hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0010 [ 73.078737] ehci_hcd 0000:00:13.5: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT [ 73.078748] hub 1-0:1.0: port 4, status 0501, change 0001, 480 Mb/s [ 73.182052] hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501 [ 73.233063] ehci_hcd 0000:00:13.5: port 4 high speed [ 73.233073] ehci_hcd 0000:00:13.5: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 73.284052] usb 1-4: new high speed USB device using ehci_hcd and address 5 [ 73.911043] ehci_hcd 0000:00:13.5: port 4 high speed [ 73.911052] ehci_hcd 0000:00:13.5: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 73.976135] usb 1-4: default language 0x0409 [ 73.977761] usb 1-4: udev 5, busnum 1, minor = 4 [ 73.977765] usb 1-4: New USB device found, idVendor=1b1c, idProduct=0b11 [ 73.977769] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 73.977773] usb 1-4: Product: Voyager Mini [ 73.977776] usb 1-4: Manufacturer: Corsair [ 73.977779] usb 1-4: SerialNumber: AA04012700009664 [ 73.977894] usb 1-4: usb_probe_device [ 73.977899] usb 1-4: configuration #1 chosen from 1 choice [ 73.978270] usb 1-4: adding 1-4:1.0 (config #1, interface 0) [ 73.978352] usb-storage 1-4:1.0: usb_probe_interface [ 73.978359] usb-storage 1-4:1.0: usb_probe_interface - got id [ 73.978481] scsi6 : usb-storage 1-4:1.0 [ 74.979569] scsi 6:0:0:0: Direct-Access Corsair Voyager Mini 1100 PQ: 0 ANSI: 0 CCS [ 74.979811] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 74.982798] sd 6:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB) [ 74.983675] sd 6:0:0:0: [sdb] Write Protect is off [ 74.983682] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 74.983685] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 74.988174] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 74.989064] sdb: sdb1 [ 74.990409] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 74.990415] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 80.720810] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 211.939181] hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0010 [ 211.939195] ehci_hcd 0000:00:13.5: GetStatus port:4 status 001002 0 ACK POWER sig=se0 CSC [ 211.939205] hub 1-0:1.0: port 4, status 0100, change 0001, 12 Mb/s [ 211.939210] usb 1-4: USB disconnect, address 5 [ 211.939213] usb 1-4: unregistering device [ 211.939216] usb 1-4: unregistering interface 1-4:1.0 [ 211.942475] usb 1-4: usb_disable_device nuking all URBs [ 212.046059] hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x100 [ 1913.525779] PM: Syncing filesystems ... done. [ 1914.469259] Freezing user space processes ... (elapsed 0.05 seconds) done. [ 1914.524048] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 1914.535066] Suspending console(s) (use no_console_suspend to debug) [ 1914.535456] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1914.562106] sd 0:0:0:0: [sda] Stopping disk [ 1914.599822] hub 6-0:1.0: hub_suspend [ 1914.599830] usb usb6: bus suspend [ 1914.599835] ohci_hcd 0000:00:13.4: suspend root hub [ 1914.599849] rtl8187 1-6:1.0: forced unbind [ 1914.600020] hub 5-0:1.0: hub_suspend [ 1914.600024] usb usb5: bus suspend [ 1914.600027] ohci_hcd 0000:00:13.3: suspend root hub [ 1914.600038] hub 4-0:1.0: hub_suspend [ 1914.600042] usb usb4: bus suspend [ 1914.600045] ohci_hcd 0000:00:13.2: suspend root hub [ 1914.600055] hub 3-0:1.0: hub_suspend [ 1914.600058] usb usb3: bus suspend [ 1914.600061] ohci_hcd 0000:00:13.1: suspend root hub [ 1914.600071] hub 2-0:1.0: hub_suspend [ 1914.600074] usb usb2: bus suspend [ 1914.600078] ohci_hcd 0000:00:13.0: suspend root hub [ 1914.601238] ACPI handle has no context! [ 1914.601248] sdhci-pci 0000:14:06.1: PCI INT B disabled [ 1914.601256] ACPI handle has no context! [ 1914.601504] HDA Intel 0000:00:14.2: PCI INT A disabled [ 1914.601700] pata_atiixp 0000:00:14.1: PCI INT A disabled [ 1914.601731] ohci_hcd 0000:00:13.4: PCI INT C disabled [ 1914.601745] ohci_hcd 0000:00:13.3: PCI INT B disabled [ 1914.601755] ohci_hcd 0000:00:13.1: PCI INT B disabled [ 1914.601773] ohci_hcd 0000:00:13.2: PCI INT C disabled [ 1914.601775] ohci_hcd 0000:00:13.0: PCI INT A disabled [ 1914.603067] ACPI handle has no context! [ 1914.605028] wlan0: deauthenticating from 00:1c:10:b8:e3:ea by local choice (reason=3) [ 1914.608022] ieee80211 phy0: Removed STA 00:1c:10:b8:e3:ea [ 1914.608028] ieee80211 phy0: Destroyed STA 00:1c:10:b8:e3:ea [ 1914.608031] ieee80211 phy0: device now idle [ 1914.659276] cfg80211: Calling CRDA to update world regulatory domain [ 1914.662024] ------------[ cut here ]------------ [ 1914.662031] WARNING: at net/mac80211/work.c:884 ieee80211_work_work+0x363/0x1240() [ 1914.662033] Hardware name: Satellite A210 [ 1914.662035] work scheduled while going to suspend [ 1914.662038] Pid: 3971, comm: kworker/u:1 Not tainted 2.6.37-rc4-00153-g59e57c6-dirty #5 [ 1914.662041] Call Trace: [ 1914.662046] [] ? ieee80211_work_work+0x363/0x1240 [ 1914.662051] [] ? warn_slowpath_common+0x76/0xc0 [ 1914.662055] [] ? warn_slowpath_fmt+0x45/0x50 [ 1914.662058] [] ? ieee80211_work_work+0x363/0x1240 [ 1914.662063] [] ? update_curr+0xaf/0x170 [ 1914.662066] [] ? enqueue_task_fair+0x38/0x50 [ 1914.662072] [] ? wait_for_common+0xe5/0x190 [ 1914.662075] [] ? default_wake_function+0x0/0x20 [ 1914.662079] [] ? ieee80211_work_purge+0x74/0xd0 [ 1914.662082] [] ? ieee80211_do_stop+0x75/0x530 [ 1914.662085] [] ? ieee80211_stop+0x15/0x20 [ 1914.662090] [] ? __dev_close+0x46/0x80 [ 1914.662093] [] ? dev_close+0x12/0x40 [ 1914.662097] [] ? rollback_registered_many+0x59/0x230 [ 1914.662101] [] ? unregister_netdevice_many+0xe/0x70 [ 1914.662104] [] ? ieee80211_remove_interfaces+0xa4/0xe0 [ 1914.662108] [] ? ieee80211_unregister_hw+0x46/0x100 [ 1914.662112] [] ? rtl8187_disconnect+0x30/0x6f [ 1914.662117] [] ? usb_unbind_interface+0x56/0x150 [ 1914.662121] [] ? __device_release_driver+0x6f/0xe0 [ 1914.662125] [] ? device_release_driver+0x25/0x40 [ 1914.662129] [] ? usb_forced_unbind_intf+0x40/0x60 [ 1914.662132] [] ? do_unbind_rebind.clone.11+0x95/0xa0 [ 1914.662136] [] ? usb_suspend+0x29/0x2b0 [ 1914.662141] [] ? usb_dev_suspend+0xe/0x20 [ 1914.662145] [] ? pm_op+0x195/0x1e0 [ 1914.662148] [] ? async_run_entry_fn+0x0/0x160 [ 1914.662151] [] ? __device_suspend+0x11b/0x170 [ 1914.662155] [] ? async_suspend+0x18/0x60 [ 1914.662158] [] ? __wake_up+0x3c/0x60 [ 1914.662161] [] ? async_run_entry_fn+0x71/0x160 [ 1914.662165] [] ? process_one_work+0xfb/0x370 [ 1914.662169] [] ? worker_thread+0x160/0x320 [ 1914.662173] [] ? __wake_up_common+0x50/0x80 [ 1914.662176] [] ? worker_thread+0x0/0x320 [ 1914.662179] [] ? worker_thread+0x0/0x320 [ 1914.662183] [] ? kthread+0x96/0xa0 [ 1914.662188] [] ? kernel_thread_helper+0x4/0x10 [ 1914.662191] [] ? kthread+0x0/0xa0 [ 1914.662194] [] ? kernel_thread_helper+0x0/0x10 [ 1914.662196] ---[ end trace bff9ce0402a70d5f ]--- [ 1914.753068] ehci_hcd 0000:00:13.5: port 6 high speed [ 1914.753076] ehci_hcd 0000:00:13.5: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1914.804032] usb 1-6: reset high speed USB device using ehci_hcd and address 2 [ 1914.855056] ehci_hcd 0000:00:13.5: port 6 high speed [ 1914.855061] ehci_hcd 0000:00:13.5: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1914.920835] hub 1-0:1.0: hub_suspend [ 1914.920841] usb usb1: bus suspend [ 1914.920843] ehci_hcd 0000:00:13.5: suspend root hub [ 1914.932055] ehci_hcd 0000:00:13.5: PCI INT D disabled [ 1914.986998] ahci 0000:00:12.0: PCI INT A disabled [ 1915.102305] [drm] Disabling audio support [ 1915.103332] radeon 0000:01:05.0: PCI INT A disabled [ 1915.114078] radeon 0000:01:05.0: power state changed by ACPI to D3 [ 1915.114140] PM: suspend of devices complete after 578.804 msecs [ 1915.114432] r8169 0000:08:00.0: PME# enabled [ 1915.114444] pci 0000:00:05.0: wake-up capability enabled by ACPI [ 1915.125155] ehci_hcd 0000:00:13.5: wakeup: 0 [ 1915.136039] ehci_hcd 0000:00:13.5: power state changed by ACPI to D3 [ 1915.136043] ehci_hcd 0000:00:13.5: --> PCI D3hot [ 1915.136068] ohci_hcd 0000:00:13.4: wakeup: 0 [ 1915.136071] ohci_hcd 0000:00:13.4: --> PCI D0 [ 1915.136095] ohci_hcd 0000:00:13.3: wakeup: 0 [ 1915.136098] ohci_hcd 0000:00:13.3: --> PCI D0 [ 1915.136122] ohci_hcd 0000:00:13.2: wakeup: 0 [ 1915.136125] ohci_hcd 0000:00:13.2: --> PCI D0 [ 1915.136149] ohci_hcd 0000:00:13.1: wakeup: 0 [ 1915.136152] ohci_hcd 0000:00:13.1: --> PCI D0 [ 1915.136176] ohci_hcd 0000:00:13.0: wakeup: 0 [ 1915.136179] ohci_hcd 0000:00:13.0: --> PCI D0 [ 1915.136271] PM: late suspend of devices complete after 22.125 msecs [ 1915.136343] ACPI: Preparing to enter system sleep state S3 [ 1917.136076] PM: Saving platform NVS memory [ 1917.136195] Disabling non-boot CPUs ... [ 1917.149161] CPU 1 is now offline [ 1917.149165] SMP alternatives: switching to UP code [ 1917.153992] Back to C! [ 1917.153992] PM: Restoring platform NVS memory [ 1917.154083] Enabling non-boot CPUs ... [ 1917.154173] SMP alternatives: switching to SMP code [ 1917.158964] Booting Node 0 Processor 1 APIC 0x1 [ 1917.153706] Switch to broadcast mode on CPU1 [ 1917.241280] CPU1 is up [ 1917.241390] ACPI: Waking up from system sleep state S3 [ 1917.357107] pci 0000:00:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000) [ 1917.357123] pci 0000:00:01.0: restoring config space at offset 0x9 (was 0x10001, writing 0xf7f1f001) [ 1917.357127] pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x2209191, writing 0x22209191) [ 1917.357142] pci 0000:00:04.0: restoring config space at offset 0xf (was 0xff, writing 0x400ff) [ 1917.357148] pci 0000:00:04.0: restoring config space at offset 0x9 (was 0x10001, writing 0xffc1ffb1) [ 1917.357151] pci 0000:00:04.0: restoring config space at offset 0x8 (was 0x0, writing 0xffe0ffd0) [ 1917.357155] pci 0000:00:04.0: restoring config space at offset 0x7 (was 0x101, writing 0xe1e1) [ 1917.357160] pci 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008) [ 1917.357165] pci 0000:00:04.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 1917.357179] pci 0000:00:05.0: restoring config space at offset 0xf (was 0xff, writing 0x400ff) [ 1917.357185] pci 0000:00:05.0: restoring config space at offset 0x9 (was 0x10001, writing 0xffa1ffa1) [ 1917.357189] pci 0000:00:05.0: restoring config space at offset 0x8 (was 0x0, writing 0xf820f820) [ 1917.357192] pci 0000:00:05.0: restoring config space at offset 0x7 (was 0x20000101, writing 0xa1a1) [ 1917.357197] pci 0000:00:05.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008) [ 1917.357202] pci 0000:00:05.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 1917.357216] pci 0000:00:06.0: restoring config space at offset 0xf (was 0xff, writing 0x400ff) [ 1917.357221] pci 0000:00:06.0: restoring config space at offset 0x9 (was 0x10001, writing 0xff51ff41) [ 1917.357225] pci 0000:00:06.0: restoring config space at offset 0x8 (was 0x0, writing 0xff70ff60) [ 1917.357229] pci 0000:00:06.0: restoring config space at offset 0x7 (was 0x101, writing 0xd1d1) [ 1917.357234] pci 0000:00:06.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008) [ 1917.357238] pci 0000:00:06.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 1917.357274] ahci 0000:00:12.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100) [ 1917.357294] ahci 0000:00:12.0: set SATA to AHCI mode [ 1917.357318] ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00012) [ 1917.357348] ohci_hcd 0000:00:13.1: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00012) [ 1917.357376] ohci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00012) [ 1917.357404] ohci_hcd 0000:00:13.3: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00012) [ 1917.357433] ohci_hcd 0000:00:13.4: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00012) [ 1917.357468] ehci_hcd 0000:00:13.5: restoring config space at offset 0x1 (was 0x2b00002, writing 0x2b00012) [ 1917.357498] ehci_hcd 0000:00:13.5: power state changed by ACPI to D0 [ 1917.357515] ehci_hcd 0000:00:13.5: power state changed by ACPI to D0 [ 1917.357569] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000) [ 1917.357587] HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x10a, writing 0xa) [ 1917.357609] HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002) [ 1917.357719] r8169 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) [ 1917.357735] r8169 0000:08:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xf8200004) [ 1917.357742] r8169 0000:08:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xa001) [ 1917.357748] r8169 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) [ 1917.357755] r8169 0000:08:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 1917.357805] firewire_ohci 0000:14:06.0: restoring config space at offset 0xf (was 0x4020100, writing 0x402010b) [ 1917.357829] firewire_ohci 0000:14:06.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804008) [ 1917.357853] firewire_ohci 0000:14:06.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 1917.357856] firewire_ohci 0000:14:06.0: MMC cards are now supported by standard SDHCI controller [ 1917.357870] sdhci-pci 0000:14:06.1: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 1917.357892] sdhci-pci 0000:14:06.1: restoring config space at offset 0x4 (was 0x0, writing 0xf8300800) [ 1917.357898] sdhci-pci 0000:14:06.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804008) [ 1917.357906] sdhci-pci 0000:14:06.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 1917.357929] pci 0000:14:06.2: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 1917.357951] pci 0000:14:06.2: restoring config space at offset 0x4 (was 0x0, writing 0xf8301000) [ 1917.357958] pci 0000:14:06.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804008) [ 1917.357965] pci 0000:14:06.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 1917.357988] pci 0000:14:06.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 1917.358021] pci 0000:14:06.3: restoring config space at offset 0x4 (was 0x0, writing 0xf8301400) [ 1917.358027] pci 0000:14:06.3: restoring config space at offset 0x3 (was 0x800000, writing 0x804008) [ 1917.358035] pci 0000:14:06.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 1917.358212] PM: early resume of devices complete after 1.143 msecs [ 1917.358455] pci 0000:00:04.0: setting latency timer to 64 [ 1917.358465] pci 0000:00:05.0: setting latency timer to 64 [ 1917.358472] pci 0000:00:06.0: setting latency timer to 64 [ 1917.358493] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1917.358573] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1917.358582] ohci_hcd 0000:00:13.0: powerup ports [ 1917.358596] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1917.358606] ohci_hcd 0000:00:13.1: powerup ports [ 1917.358660] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1917.358671] ohci_hcd 0000:00:13.2: powerup ports [ 1917.358685] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1917.358693] ohci_hcd 0000:00:13.3: powerup ports [ 1917.358700] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1917.358711] ohci_hcd 0000:00:13.4: powerup ports [ 1917.358748] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1917.358757] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1917.358812] sdhci-pci 0000:14:06.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1917.358815] sdhci-pci 0000:14:06.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1917.363725] pci 0000:00:05.0: wake-up capability disabled by ACPI [ 1917.363733] r8169 0000:08:00.0: PME# disabled [ 1917.363886] toshiba_bluetooth: Re-enabling Toshiba Bluetooth [ 1917.363895] ehci_hcd 0000:00:13.5: power state changed by ACPI to D0 [ 1917.363959] sd 0:0:0:0: [sda] Starting disk [ 1917.364161] radeon 0000:01:05.0: power state changed by ACPI to D0 [ 1917.364176] ehci_hcd 0000:00:13.5: power state changed by ACPI to D0 [ 1917.364184] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1917.364506] radeon 0000:01:05.0: power state changed by ACPI to D0 [ 1917.374013] radeon 0000:01:05.0: power state changed by ACPI to D0 [ 1917.374025] radeon 0000:01:05.0: power state changed by ACPI to D0 [ 1917.374032] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1917.377515] r8169 0000:08:00.0: eth0: link down [ 1917.380176] usb usb6: usb resume [ 1917.380183] ohci_hcd 0000:00:13.4: resume root hub [ 1917.380188] usb usb2: usb resume [ 1917.380194] ohci_hcd 0000:00:13.0: resume root hub [ 1917.380198] usb usb3: usb resume [ 1917.380205] ohci_hcd 0000:00:13.1: resume root hub [ 1917.380210] usb usb4: usb resume [ 1917.380215] ohci_hcd 0000:00:13.2: resume root hub [ 1917.380221] usb usb1: usb resume [ 1917.380223] usb usb5: usb resume [ 1917.380227] ehci_hcd 0000:00:13.5: resume root hub [ 1917.386030] ohci_hcd 0000:00:13.3: resume root hub [ 1917.409141] firewire_core: skipped bus generations, destroying all nodes [ 1917.440028] hub 2-0:1.0: hub_resume [ 1917.440051] hub 6-0:1.0: hub_resume [ 1917.440069] hub 4-0:1.0: hub_resume [ 1917.440073] hub 3-0:1.0: hub_resume [ 1917.446028] hub 5-0:1.0: hub_resume [ 1917.446035] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [0] = 0x00030100 PESC CSC PPS [ 1917.446039] hub 5-0:1.0: port 1: status 0100 change 0003 [ 1917.458114] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 1917.467356] radeon 0000:01:05.0: WB enabled [ 1917.467388] [drm] radeon: ring at 0x0000000060001000 [ 1917.467407] [drm] ring test succeeded in 1 usecs [ 1917.467427] [drm] ib test succeeded in 0 usecs [ 1917.467430] [drm] Enabling audio support [ 1917.523031] ehci_hcd 0000:00:13.5: port 7 full speed --> companion [ 1917.523038] ehci_hcd 0000:00:13.5: GetStatus port:7 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 1917.534022] hub 1-0:1.0: hub_resume [ 1917.534045] ehci_hcd 0000:00:13.5: GetStatus port:6 status 001809 0 ACK POWER sig=j PEC CONNECT [ 1917.534049] hub 1-0:1.0: port 6: status 0501 change 0002 [ 1917.534062] ehci_hcd 0000:00:13.5: GetStatus port:8 status 001809 0 ACK POWER sig=j PEC CONNECT [ 1917.534066] hub 1-0:1.0: port 8: status 0501 change 0002 [ 1917.635049] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS [ 1917.635053] usb 1-6: reset-resume [ 1917.635057] usb 5-1: reset-resume [ 1917.635068] usb 1-8: reset-resume [ 1917.666058] ata3: SATA link down (SStatus 0 SControl 300) [ 1917.666091] ata4: SATA link down (SStatus 0 SControl 300) [ 1917.666125] ata2: SATA link down (SStatus 0 SControl 300) [ 1917.697026] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS [ 1917.748026] usb 5-1: reset full speed USB device using ohci_hcd and address 2 [ 1917.850485] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 1917.850490] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [ 1917.866027] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS [ 1917.888417] ata5.00: configured for UDMA/33 [ 1917.910060] firewire_core: rediscovered device fw0 [ 1917.949073] btusb 5-1:1.0: no reset_resume for driver btusb? [ 1917.949077] btusb 5-1:1.1: no reset_resume for driver btusb? [ 1917.949080] btusb 5-1:1.0: forced unbind [ 1917.988072] ehci_hcd 0000:00:13.5: port 8 high speed [ 1917.988078] ehci_hcd 0000:00:13.5: GetStatus port:8 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1918.039041] usb 1-8: reset high speed USB device using ehci_hcd and address 4 [ 1918.090067] ehci_hcd 0000:00:13.5: port 8 high speed [ 1918.090073] ehci_hcd 0000:00:13.5: GetStatus port:8 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1918.204100] ehci_hcd 0000:00:13.5: port 6 high speed [ 1918.204106] ehci_hcd 0000:00:13.5: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1918.255041] usb 1-6: reset high speed USB device using ehci_hcd and address 2 [ 1918.306029] ehci_hcd 0000:00:13.5: port 6 high speed [ 1918.306034] ehci_hcd 0000:00:13.5: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1918.454029] ohci_hcd 0000:00:13.1: auto-stop root hub [ 1918.454045] ohci_hcd 0000:00:13.0: auto-stop root hub [ 1918.454059] ohci_hcd 0000:00:13.4: auto-stop root hub [ 1918.454074] ohci_hcd 0000:00:13.2: auto-stop root hub [ 1919.096029] ata1: softreset failed (device not ready) [ 1919.096033] ata1: applying SB600 PMP SRST workaround and retrying [ 1919.251042] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1919.251871] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1919.252798] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1919.252801] ata1.00: configured for UDMA/100 [ 1919.266742] PM: resume of devices complete after 1908.491 msecs [ 1919.266783] btusb 5-1:1.0: usb_probe_interface [ 1919.266787] btusb 5-1:1.0: usb_probe_interface - got id [ 1919.267051] rtl8187 1-6:1.0: usb_probe_interface [ 1919.267055] rtl8187 1-6:1.0: usb_probe_interface - got id [ 1919.548822] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 1919.548992] ieee80211 phy1: hwaddr 00:c0:a8:ff:54:49, RTL8187BvE V0 + rtl8225z2, rfkill mask 2 [ 1919.570453] rtl8187: Customer ID is 0x04 [ 1919.570491] Registered led device: rtl8187-phy1::radio [ 1919.570515] Registered led device: rtl8187-phy1::tx [ 1919.570539] Registered led device: rtl8187-phy1::rx [ 1919.571319] rtl8187: wireless switch is on [ 1919.571636] Restarting tasks ... [ 1919.571689] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1919.571695] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1919.571699] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1919.571703] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1919.571707] hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0002 [ 1919.571717] hub 5-0:1.0: port 1, status 0103, change 0000, 12 Mb/s [ 1919.571722] hub 1-0:1.0: state 7 ports 10 chg 0140 evt 0000 [ 1919.571729] hub 1-0:1.0: port 6, status 0503, change 0000, 480 Mb/s [ 1919.571735] hub 1-0:1.0: port 8, status 0503, change 0000, 480 Mb/s [ 1919.581271] done. [ 1939.742649] ieee80211 phy1: device now idle [ 1939.796751] ieee80211 phy1: device no longer idle - scanning [ 1941.792327] ieee80211 phy1: device now idle [ 1941.859587] ieee80211 phy1: device no longer idle - scanning [ 1943.782370] ieee80211 phy1: device now idle [ 1970.205954] ieee80211 phy1: device no longer idle - scanning [ 1972.132256] ieee80211 phy1: device now idle [ 1974.401743] ieee80211 phy1: device no longer idle - scanning [ 1976.335371] ieee80211 phy1: device now idle