Linux version 2.6.36 (root@gobelin) (gcc version 4.4.4 (Gentoo 4.4.4-r2 p1.2, pie-0.4.5) ) #7 SMP Tue Oct 26 15:51:29 CEST 2010 Command line: BOOT_IMAGE=(hd0,5)/boot/vmlinuz-2.6.36 root=/dev/sda5 reboot=pci snd_hda_intel.model=mbp55 quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000af000000 (usable) BIOS-e820: 00000000af000000 - 00000000bf000000 (reserved) BIOS-e820: 00000000bf000000 - 00000000bf70f000 (usable) BIOS-e820: 00000000bf70f000 - 00000000bf930000 (ACPI NVS) BIOS-e820: 00000000bf930000 - 00000000bf931000 (ACPI data) BIOS-e820: 00000000bf931000 - 00000000bf939000 (ACPI NVS) BIOS-e820: 00000000bf939000 - 00000000bfef9000 (ACPI data) BIOS-e820: 00000000bfef9000 - 00000000bfeff000 (reserved) BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI data) BIOS-e820: 00000000d3400000 - 00000000d3401000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) NX (Execute Disable) protection: active DMI 2.4 present. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: write-back MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-FFFFF uncachable MTRR variable ranges enabled: 0 base 0C0000000 mask FC0000000 uncachable 1 base 0BFF00000 mask FFFF00000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xbf70f max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bf70f000 0000000000 - 00bf600000 page 2M 00bf600000 - 00bf70f000 page 4k kernel direct mapping tables up to bf70f000 @ 8000-d000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ b000-11000 ACPI: RSDP 00000000000fe020 00024 (v02 APPLE ) ACPI: XSDT 00000000bf96a1c0 00084 (v01 APPLE Apple00 00000039 01000013) ACPI: FACP 00000000bf968000 000F4 (v04 APPLE Apple00 00000039 Loki 0000005F) ACPI: DSDT 00000000bf95a000 06101 (v01 APPLE MacBookP 00070001 INTL 20061109) ACPI: FACS 00000000bf71e000 00040 ACPI: HPET 00000000bf967000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: APIC 00000000bf966000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: APIC 00000000bf965000 00068 (v02 APPLE Apple00 00000001 Loki 0000005F) ACPI: ASF! 00000000bf963000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F) ACPI: SBST 00000000bf962000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: ECDT 00000000bf961000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: SSDT 00000000bf956000 00024 (v01 APPLE Apple 00001000 INTL 20061109) ACPI: SSDT 00000000bf955000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109) ACPI: MCFG 00000000bf964000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: SSDT 00000000bf959000 000A5 (v01 SataRe SataPri 00001000 INTL 20061109) ACPI: SSDT 00000000bf958000 0009F (v01 SataRe SataSec 00001000 INTL 20061109) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: Local APIC address 0xfee00000 (8/32 early reservations) ==> bootmem [0000000000 - 0140000000] #0 [0001000000 - 0001473c24] TEXT DATA BSS ==> [0001000000 - 0001473c24] #1 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #2 [0001474000 - 00014741e9] BRK ==> [0001474000 - 00014741e9] #3 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000] #4 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] #6 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] #7 [000000c000 - 0000034000] BOOTMAP ==> [000000c000 - 0000034000] Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x000af000 0: 0x000bf000 -> 0x000bf70f 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 980653 DMA zone: 56 pages used for memmap DMA zone: 146 pages reserved DMA zone: 3796 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 700231 pages, LIFO batch:31 Normal zone: 3584 pages used for memmap Normal zone: 258560 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10de8201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 Allocating PCI resources starting at d3401000 (gap: d3401000:1cbff000) setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 26 pages/cpu @ffff880028200000 s76544 r8192 d21760 u1048576 pcpu-alloc: s76544 r8192 d21760 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 962587 Kernel command line: BOOT_IMAGE=(hd0,5)/boot/vmlinuz-2.6.36 root=/dev/sda5 reboot=pci snd_hda_intel.model=mbp55 quiet PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 Checking aperture... No AGP bridge found Memory: 3789960k/5242880k available (2715k kernel code, 1320268k absent, 132652k reserved, 1170k data, 348k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:512 Extended CMOS year: 2000 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 2388.881 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4777.76 BogoMIPS (lpj=23888810) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20100702 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 0a Booting Node 0, Processors #1 Ok. Brought up 2 CPUs Total of 2 processors activated (9556.29 BogoMIPS). NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: EC description table is found, configuring boot EC ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 00000000bf71dc18 0027A (v01 APPLE Cpu0Ist 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0027A (v01 APPLE Cpu0Ist 00003000 INTL 20061109) ACPI: SSDT 00000000bf71c618 005A6 (v01 APPLE Cpu0Cst 00003001 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 005A6 (v01 APPLE Cpu0Cst 00003001 INTL 20061109) ACPI: SSDT 00000000bf71df18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109) ACPI: SSDT 00000000bf71bf18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109) ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x57, I/O: command/status = 0x66, data = 0x62 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] pci 0000:00:03.0: reg 10: [io 0x2100-0x21ff] pci 0000:00:03.2: reg 10: [io 0x0000-0x00ff] pci 0000:00:03.2: reg 20: [io 0x2240-0x227f] pci 0000:00:03.2: reg 24: [io 0x2200-0x223f] pci 0000:00:03.2: PME# supported from D3hot D3cold pci 0000:00:03.2: PME# disabled pci 0000:00:03.4: reg 10: [mem 0xd3400000-0xd347ffff] pci 0000:00:04.0: reg 10: [mem 0xd348a000-0xd348afff] pci 0000:00:04.0: supports D1 D2 pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:04.1: reg 10: [mem 0xd348b100-0xd348b1ff] pci 0000:00:04.1: supports D1 D2 pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.1: PME# disabled pci 0000:00:06.0: reg 10: [mem 0xd3489000-0xd3489fff] pci 0000:00:06.0: supports D1 D2 pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:06.1: reg 10: [mem 0xd348b000-0xd348b0ff] pci 0000:00:06.1: supports D1 D2 pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:06.1: PME# disabled pci 0000:00:08.0: reg 10: [mem 0xd3480000-0xd3483fff] pci 0000:00:08.0: PME# supported from D3hot D3cold pci 0000:00:08.0: PME# disabled pci 0000:00:0a.0: reg 10: [io 0x2298-0x229f] pci 0000:00:0a.0: reg 14: [io 0x22a4-0x22a7] pci 0000:00:0a.0: reg 18: [io 0x2290-0x2297] pci 0000:00:0a.0: reg 1c: [io 0x22a0-0x22a3] pci 0000:00:0a.0: reg 20: [io 0x2280-0x228f] pci 0000:00:0a.0: reg 24: [mem 0xd3484000-0xd3485fff] pci 0000:00:0b.0: reg 10: [mem 0xd3488000-0xd3488fff] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0e.0: PME# disabled pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:15.0: PME# disabled pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:16.0: PME# disabled pci 0000:00:17.0: PME# supported from D0 D3hot D3cold pci 0000:00:17.0: PME# disabled pci 0000:01:00.0: reg 10: [mem 0xd3300000-0xd3300fff 64bit] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:00:0e.0: PCI bridge to [bus 01-01] pci 0000:00:0e.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled) pci 0000:00:0e.0: bridge window [mem 0xd3300000-0xd33fffff] pci 0000:00:0e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:02:00.0: reg 10: [mem 0xd3200000-0xd3203fff 64bit] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:15.0: PCI bridge to [bus 02-02] pci 0000:00:15.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled) pci 0000:00:15.0: bridge window [mem 0xd3200000-0xd32fffff] pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:03:00.0: reg 10: [mem 0xd3100000-0xd310ffff 64bit] pci 0000:03:00.0: PME# supported from D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:16.0: PCI bridge to [bus 03-03] pci 0000:00:16.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled) pci 0000:00:16.0: bridge window [mem 0xd3100000-0xd31fffff] pci 0000:00:16.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:04:00.0: reg 10: [mem 0xd2000000-0xd2ffffff] pci 0000:04:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:04:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref] pci 0000:04:00.0: reg 24: [io 0x1000-0x107f] pci 0000:04:00.0: reg 30: [mem 0xd3000000-0xd301ffff pref] pci 0000:00:17.0: PCI bridge to [bus 04-04] pci 0000:00:17.0: bridge window [io 0x1000-0x1fff] pci 0000:00:17.0: bridge window [mem 0xd2000000-0xd30fffff] pci 0000:00:17.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [Z00B] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [Z00C] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [Z00D] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [Z00E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [Z00N] (IRQs 16 17 18 19 20 21 22 23) *11 ACPI: PCI Interrupt Link [Z00O] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [Z00P] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [Z00Q] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *15 ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11 ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *10 ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *15 ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *7 ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11 ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21 22 23) *7 ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 23) *5 ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *14 vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 00000000af000000 - 00000000afffffff reserve RAM buffer: 00000000bf70f000 - 00000000bfffffff HPET: 4 timers in total, 0 timers will be used for per-cpu timer Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:06: disabling [io 0x0010-0x001f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff] pnp 00:06: disabling [io 0x0022-0x003f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff] pnp 00:06: disabling [io 0x0044-0x005f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff] pnp 00:06: disabling [io 0x0063] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff] pnp 00:06: disabling [io 0x0065] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff] pnp 00:06: disabling [io 0x0067-0x006f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff] pnp 00:06: disabling [io 0x0072-0x0073] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff] pnp 00:06: disabling [io 0x0074-0x007f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff] pnp 00:06: disabling [io 0x0091-0x0093] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff] pnp 00:06: disabling [io 0x0097-0x009f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff] pnp 00:06: disabling [io 0x00a2-0x00bf] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff] pnp 00:06: disabling [io 0x00e0-0x00ef] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff] pnp 00:06: disabling [io 0x0080] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff] pnp: PnP ACPI: found 8 devices ACPI: ACPI bus type pnp unregistered system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved system 00:06: [io 0x0400-0x047f] has been reserved system 00:06: [io 0x0480-0x04ff] has been reserved system 00:06: [io 0x0500-0x057f] has been reserved system 00:06: [io 0x0580-0x05ff] has been reserved system 00:06: [io 0x0800-0x087f] has been reserved system 00:06: [io 0x0880-0x08ff] has been reserved system 00:06: [io 0x04d0-0x04d1] has been reserved system 00:06: [io 0x0295-0x0296] has been reserved pci 0000:00:03.2: BAR 0: assigned [io 0x2000-0x20ff] pci 0000:00:03.2: BAR 0: set to [io 0x2000-0x20ff] (PCI address [0x2000-0x20ff] pci 0000:00:0e.0: PCI bridge to [bus 01-01] pci 0000:00:0e.0: bridge window [io disabled] pci 0000:00:0e.0: bridge window [mem 0xd3300000-0xd33fffff] pci 0000:00:0e.0: bridge window [mem pref disabled] pci 0000:00:15.0: PCI bridge to [bus 02-02] pci 0000:00:15.0: bridge window [io disabled] pci 0000:00:15.0: bridge window [mem 0xd3200000-0xd32fffff] pci 0000:00:15.0: bridge window [mem pref disabled] pci 0000:00:16.0: PCI bridge to [bus 03-03] pci 0000:00:16.0: bridge window [io disabled] pci 0000:00:16.0: bridge window [mem 0xd3100000-0xd31fffff] pci 0000:00:16.0: bridge window [mem pref disabled] pci 0000:00:17.0: PCI bridge to [bus 04-04] pci 0000:00:17.0: bridge window [io 0x1000-0x1fff] pci 0000:00:17.0: bridge window [mem 0xd2000000-0xd30fffff] pci 0000:00:17.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] ACPI: PCI Interrupt Link [Z00B] enabled at IRQ 23 pci 0000:00:0e.0: PCI INT A -> Link[Z00B] -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:0e.0: setting latency timer to 64 pci 0000:00:15.0: power state changed by ACPI to D0 pci 0000:00:15.0: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 22 pci 0000:00:15.0: PCI INT A -> Link[Z00J] -> GSI 22 (level, low) -> IRQ 22 pci 0000:00:15.0: setting latency timer to 64 ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 21 pci 0000:00:16.0: PCI INT A -> Link[Z00N] -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:16.0: setting latency timer to 64 pci 0000:00:17.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff] pci_bus 0000:00: resource 20 [mem 0xc0000000-0xfebfffff] pci_bus 0000:01: resource 1 [mem 0xd3300000-0xd33fffff] pci_bus 0000:02: resource 1 [mem 0xd3200000-0xd32fffff] pci_bus 0000:03: resource 1 [mem 0xd3100000-0xd31fffff] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] pci_bus 0000:04: resource 1 [mem 0xd2000000-0xd30fffff] pci_bus 0000:04: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:04:00.0: Boot video device PCI: CLS 256 bytes, default 64 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 msgmni has been set to 7402 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:0e.0: ACPI _OSC control granted for 0x1c pcieport 0000:00:0e.0: setting latency timer to 64 pcieport 0000:00:0e.0: irq 40 for MSI/MSI-X pcieport 0000:00:15.0: ACPI _OSC control granted for 0x1c pcieport 0000:00:15.0: setting latency timer to 64 pcieport 0000:00:15.0: irq 41 for MSI/MSI-X pcieport 0000:00:16.0: ACPI _OSC control granted for 0x1c pcieport 0000:00:16.0: setting latency timer to 64 pcieport 0000:00:16.0: irq 42 for MSI/MSI-X intel_idle: MWAIT substates: 0x3122220 intel_idle: does not run on family 6 model 23 ACPI: AC Adapter [ADP1] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet ata_generic 0000:00:0a.0: power state changed by ACPI to D0 ata_generic 0000:00:0a.0: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 20 ata_generic 0000:00:0a.0: PCI INT A -> Link[LSI0] -> GSI 20 (level, low) -> IRQ 20 ata_generic 0000:00:0a.0: setting latency timer to 64 scsi0 : ata_generic scsi1 : ata_generic ata1: PATA max UDMA/100 cmd 0x2298 ctl 0x22a4 bmdma 0x2280 irq 20 ata2: PATA max UDMA/100 cmd 0x2290 ctl 0x22a0 bmdma 0x2288 irq 20 PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice cpuidle: using governor ladder TCP cubic registered NET: Registered protocol family 17 ACPI: Battery Slot [BAT0] (battery present) ata1.00: ATA-8: APPLE SSD TS128B, AGAA0206, max UDMA/100 ata1.00: 236978176 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA APPLE SSD TS128B AGAA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 236978176 512-byte logical blocks: (121 GB/113 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sd 0:0:0:0: [sda] Attached SCSI disk ata2.01: NODEV after polling detection ata2.00: ATAPI: MATSHITADVD-R UJ-898, HC10, max UDMA/100 ata2.00: configured for UDMA/100 scsi 1:0:0:0: CD-ROM MATSHITA DVD-R UJ-898 HC10 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext2 filesystem) readonly on device 8:5. Freeing unused kernel memory: 348k freed udev: starting version 151 udevd (128): /proc/128/oom_adj is deprecated, please use /proc/128/oom_score_adj instead. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:04.0: power state changed by ACPI to D0 ohci_hcd 0000:00:04.0: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 19 ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:00:04.0: setting latency timer to 64 ohci_hcd 0000:00:04.0: OHCI Host Controller ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:04.0: irq 19, io mem 0xd348a000 rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs tg3.c:v3.113 (August 2, 2010) tg3 0000:03:00.0: PCI INT A -> Link[Z00N] -> GSI 21 (level, low) -> IRQ 21 tg3 0000:03:00.0: setting latency timer to 64 applesmc: Apple MacBook Pro 7 detected: applesmc: - Model with accelerometer applesmc: - Model with light sensors and backlight applesmc: - Model with 15 temperature sensors applesmc: device has already been initialized (0xe0, 0x00). applesmc: device successfully initialized. applesmc: 1 fans found. wl: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint input: applesmc as /devices/platform/applesmc.768/input/input4 Registered led device: smc::kbd_backlight applesmc: driver successfully loaded. wl 0000:02:00.0: PCI INT A -> Link[Z00J] -> GSI 22 (level, low) -> IRQ 22 wl 0000:02:00.0: setting latency timer to 64 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.36 ohci_hcd usb usb1: SerialNumber: 0000:00:04.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd 0000:00:06.0: power state changed by ACPI to D0 ohci_hcd 0000:00:06.0: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [Z000] enabled at IRQ 18 ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z000] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:06.0: setting latency timer to 64 ohci_hcd 0000:00:06.0: OHCI Host Controller ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:06.0: irq 18, io mem 0xd3489000 tg3 0000:03:00.0: eth1: Tigon3 [partno(BCM95764m) rev 5784100] (PCI Express) MAC address c4:2c:03:08:cc:30 tg3 0000:03:00.0: eth1: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1]) tg3 0000:03:00.0: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:03:00.0: eth1: dma_rwctrl[76180000] dma_mask[64-bit] lib80211_crypt: registered algorithm 'TKIP' eth0: Broadcom BCM432b 802.11 Hybrid Wireless Controller 5.60.246.2 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.36 ohci_hcd usb usb2: SerialNumber: 0000:00:06.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected HDA Intel 0000:00:08.0: power state changed by ACPI to D0 HDA Intel 0000:00:08.0: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17 HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17 hda_intel: Disable MSI for Nvidia chipset HDA Intel 0000:00:08.0: setting latency timer to 64 udev: renamed network interface eth0 to eth1 udev: renamed network interface eth1_rename to eth0 usb 1-1: new full speed USB device using ohci_hcd and address 2 usb 1-1: New USB device found, idVendor=13fe, idProduct=3600 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: USB DISK 2.0 usb 1-1: Manufacturer: usb 1-1: SerialNumber: 079B0B007B511BCD Initializing USB Mass Storage driver... scsi2 : usb-storage 1-1:1.0 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. scsi 2:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS sd 2:0:0:0: [sdb] 31277056 512-byte logical blocks: (16.0 GB/14.9 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] Attached SCSI removable disk EXT4-fs (sda5): re-mounted. Opts: (null) hub 1-0:1.0: Cannot enable port 6. Maybe the USB cable is bad? EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) hub 1-0:1.0: Cannot enable port 6. Maybe the USB cable is bad? hub 1-0:1.0: Cannot enable port 6. Maybe the USB cable is bad? Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.15 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 hub 1-0:1.0: Cannot enable port 6. Maybe the USB cable is bad? hub 1-0:1.0: unable to enumerate USB device on port 6 usb 2-1: new full speed USB device using ohci_hcd and address 2 usb 2-1: New USB device found, idVendor=05ac, idProduct=8403 usb 2-1: New USB device strings: Mfr=3, Product=4, SerialNumber=2 usb 2-1: Product: Card Reader usb 2-1: Manufacturer: Apple usb 2-1: SerialNumber: 000000009833 scsi3 : usb-storage 2-1:1.0 usb 2-3: new full speed USB device using ohci_hcd and address 3 usb 2-3: New USB device found, idVendor=05ac, idProduct=0236 usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-3: Product: Apple Internal Keyboard / Trackpad usb 2-3: Manufacturer: Apple Inc. input: bcm5974 as /devices/pci0000:00/0000:00:06.0/usb2/2-3/2-3:1.2/input/input5 usbcore: registered new interface driver bcm5974 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:06.0/usb2/2-3/2-3:1.0/input/input6 apple 0003:05AC:0236.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:06.0-3/input0 usb 2-5: new low speed USB device using ohci_hcd and address 4 usb 2-5: New USB device found, idVendor=05ac, idProduct=8242 usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-5: Product: IR Receiver usb 2-5: Manufacturer: Apple Computer, Inc. usb 2-6: new full speed USB device using ohci_hcd and address 5 apple 0003:05AC:0236.0002: hidraw1: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:06.0-3/input1 apple 0003:05AC:8242.0003: hiddev0,hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:06.0-5/input0 usb 2-6: New USB device found, idVendor=0a5c, idProduct=4500 usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-6: Product: BRCM2046 Hub usb 2-6: Manufacturer: Apple Inc. hub 2-6:1.0: USB hub found hub 2-6:1.0: 3 ports detected scsi 3:0:0:0: Direct-Access APPLE SD Card Reader 1.00 PQ: 0 ANSI: 0 sd 3:0:0:0: [sdc] Attached SCSI removable disk usb 2-6.1: new full speed USB device using ohci_hcd and address 6 usb 2-6.1: New USB device found, idVendor=05ac, idProduct=8213 usb 2-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-6.1: Product: Bluetooth USB Host Controller usb 2-6.1: Manufacturer: Apple Inc. usb 2-6.1: SerialNumber: 58B035993159 Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb tg3 0000:03:00.0: irq 43 for MSI/MSI-X tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16 nvidia 0000:04:00.0: PCI INT A -> Link[LGPU] -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:04:00.0: setting latency timer to 64 vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.12 Fri Oct 8 11:17:08 PDT 2010 nvidia 0000:04:00.0: setting latency timer to 64 vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=none,decodes=none:owns=io+mem NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.12 Fri Oct 8 11:17:08 PDT 2010 EXT4-fs (sda7): re-mounted. Opts: commit=0 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 EXT4-fs (sdb1): mounted filesystem without journal. Opts: (null) input: Souris de gschwind as /devices/pci0000:00/0000:00:06.0/usb2/2-6/2-6.1/2-6.1:1.0/bluetooth/hci0/hci0:12/input7 magicmouse 0005:05AC:030D.0004: input,hidraw3: BLUETOOTH HID v0.84 Mouse [Souris de gschwind] on 58:B0:35:99:31:59 input: Souris de gschwind as /devices/pci0000:00/0000:00:06.0/usb2/2-6/2-6.1/2-6.1:1.0/bluetooth/hci0/hci0:12/input8