Linux version 2.6.7-rc2 (root@uranus.walrond.org) (gcc version 3.3.3) #1 SMP Thu Jun 3 21:55:23 GMT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fffa000 (usable) BIOS-e820: 000000007fffa000 - 000000007ffff000 (ACPI data) BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) user-defined physical RAM map: user: 0000000000000000 - 000000000009fc00 (usable) user: 000000000009fc00 - 00000000000a0000 (reserved) user: 00000000000f0000 - 0000000000100000 (reserved) user: 0000000000100000 - 000000007fffa000 (usable) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f0490 On node 0 totalpages: 524282 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 294906 pages, LIFO batch:16 DMI 2.3 present. ASUS PR-DLS detected: force use of pci=noacpi ACPI: RSDP (v000 ASUS ) @ 0x000f5050 ACPI: RSDT (v001 ASUS PR-DLS 0x42302e31 MSFT 0x31313031) @ 0x7fffa000 ACPI: FADT (v001 ASUS PR-DLS 0x42302e31 MSFT 0x31313031) @ 0x7fffa145 ACPI: BOOT (v001 ASUS PR-DLS 0x42302e31 MSFT 0x31313031) @ 0x7fffa034 ACPI: SPCR (v001 ASUS PR-DLS 0x42302e31 MSFT 0x31313031) @ 0x7fffa05c ACPI: MADT (v001 ASUS PR-DLS 0x42302e31 MSFT 0x31313031) @ 0x7fffa0a9 ACPI: DSDT (v001 ASUS PR-DLS 0x00001000 MSFT 0x0100000b) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) Processor #6 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) Processor #7 15:2 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: ASUS Product ID: PROD00000000 APIC at: 0xFEE00000 I/O APIC #8 Version 17 at 0xFEC00000. I/O APIC #9 Version 17 at 0xFEC01000. I/O APIC #10 Version 17 at 0xFEC02000. Enabling APIC mode: Flat. Using 3 I/O APICs Processors: 4 Built 1 zonelists Kernel command line: root=/dev/hda1 mem=2097128K Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 2592.582 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Memory: 2075840k/2097128k available (2008k kernel code, 20180k reserved, 668k data, 380k init, 1179624k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 5111.80 BogoMIPS Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel(R) Xeon(TM) CPU 2.60GHz stepping 07 per-CPU timeslice cutoff: 1462.71 usecs. task migration cache decay timeout: 2 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 3000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 5177.34 BogoMIPS CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Xeon(TM) CPU 2.60GHz stepping 07 Booting processor 2/6 eip 3000 Initializing CPU#2 masked ExtINT on CPU#2 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 5160.96 BogoMIPS CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU2: Intel P4/Xeon Extended MCE MSRs (12) available CPU2: Thermal monitoring enabled CPU2: Intel(R) Xeon(TM) CPU 2.60GHz stepping 07 Booting processor 3/7 eip 3000 Initializing CPU#3 masked ExtINT on CPU#3 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 5177.34 BogoMIPS CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU3: Intel P4/Xeon Extended MCE MSRs (12) available CPU3: Thermal monitoring enabled CPU3: Intel(R) Xeon(TM) CPU 2.60GHz stepping 07 Total of 4 processors activated (20627.45 BogoMIPS). ENABLING IO-APIC IRQs Setting 8 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 8 ... ok. Setting 9 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 9 ... ok. Setting 10 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 10 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 8-0, 8-3, 8-5, 8-7, 8-10, 8-12, 9-0, 9-1, 9-4, 9-5, 9-8, 9-9, 9-10, 9-11, 9-12, 9-13, 9-14, 9-15, 10-0, 10-1, 10-2, 10-3, 10-4, 10-5, 10-6, 10-7, 10-8, 10-9, 10-10, 10-11, 10-12, 10-13, 10-15 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. number of MP IRQ sources: 16. number of IO-APIC #8 registers: 16. number of IO-APIC #9 registers: 16. number of IO-APIC #10 registers: 16. testing the IO APIC....................... IO APIC #8...... .... register #00: 08000000 ....... : physical APIC id: 08 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 08000000 ....... : arbitration: 08 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 001 01 0 0 0 0 0 1 1 31 01 001 01 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 001 01 0 0 0 0 0 1 1 41 05 000 00 1 0 0 0 0 0 0 00 06 001 01 0 0 0 0 0 1 1 49 07 000 00 1 0 0 0 0 0 0 00 08 001 01 0 0 0 0 0 1 1 51 09 001 01 0 0 0 0 0 1 1 59 0a 000 00 1 0 0 0 0 0 0 00 0b 001 01 1 1 0 1 0 1 1 61 0c 000 00 1 0 0 0 0 0 0 00 0d 001 01 0 0 0 0 0 1 1 69 0e 001 01 0 0 0 0 0 1 1 71 0f 001 01 0 0 0 0 0 1 1 79 IO APIC #9...... .... register #00: 09000000 ....... : physical APIC id: 09 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 09000000 ....... : arbitration: 09 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 001 01 1 1 0 1 0 1 1 81 03 001 01 1 1 0 1 0 1 1 89 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 001 01 1 1 0 1 0 1 1 91 07 001 01 1 1 0 1 0 1 1 99 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 IO APIC #10...... .... register #00: 0A000000 ....... : physical APIC id: 0A ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 0A000000 ....... : arbitration: 0A .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 001 01 1 1 0 1 0 1 1 A1 0f 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ18 -> 1:2 IRQ19 -> 1:3 IRQ22 -> 1:6 IRQ23 -> 1:7 IRQ27 -> 0:11 IRQ46 -> 2:14 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2591.0182 MHz. ..... host bus clock speed is 99.0660 MHz. checking TSC synchronization across 4 CPUs: passed. Brought up 4 CPUs CPU0: online domain 0: span 03 groups: 01 02 domain 1: span 0f groups: 03 0c CPU1: online domain 0: span 03 groups: 02 01 domain 1: span 0f groups: 03 0c CPU2: online domain 0: span 0c groups: 04 08 domain 1: span 0f groups: 0c 03 CPU3: online domain 0: span 0c groups: 08 04 domain 1: span 0f groups: 0c 03 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf1510, last bus=4 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: IRQ9 SCI: Edge set to Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1 PCI: Discovered peer bus 02 PCI: Discovered peer bus 03 PCI: Discovered primary peer bus 01 [IRQ] PCI: Discovered primary peer bus 04 [IRQ] PCI: Using IRQ router ServerWorks [1166/0201] at 0000:00:0f.0 PCI->APIC IRQ transform: (B0,I2,P0) -> 18 PCI->APIC IRQ transform: (B0,I3,P0) -> 46 PCI->APIC IRQ transform: (B0,I15,P0) -> 27 PCI->APIC IRQ transform: (B2,I4,P0) -> 22 PCI->APIC IRQ transform: (B2,I4,P1) -> 23 PCI->APIC IRQ transform: (B3,I2,P0) -> 19 Simple Boot Flag at 0x3a set to 0x80 Machine check exception polling timer started. Starting balanced_irq highmem bounce pool size: 64 pages udf: registering filesystem ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) ACPI: Processor [CPU2] (supports C1) ACPI: Processor [CPU3] (supports C1) Real Time Clock Driver v1.12 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A loop: loaded (max 8 devices) e100: Intel(R) PRO/100 Network Driver, 3.0.18 e100: Copyright(c) 1999-2004 Intel Corporation e100: eth0: e100_probe: addr 0xfd800000, irq 18, MAC addr 00:E0:18:D2:75:9D Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SvrWks CSB5: IDE controller at PCI slot 0000:00:0f.1 SvrWks CSB5: chipset revision 147 SvrWks CSB5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:pio, hdd:pio hda: QUANTUM FIREBALLP AS20.5, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 40132503 sectors (20547 MB) w/1902KiB Cache, CHS=39813/16/63, UDMA(100) hda: hda1 hda2 hda3 hda4 mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 524288 bind 65536) ip_conntrack version 2.1 (8192 buckets, 65536 max) - 300 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 380k freed EXT3 FS on hda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2048276k swap on /dev/hda3. Priority:-1 extents:1 e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex