[ 0.000000] Linux version 6.7.0-rc2-1-mainline (linux-mainline@archlinux) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU Binutils) 2.41.0) #1 SMP PREEMPT_DYNAMIC Sat, 25 Nov 2023 21:28:01 +0000 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-mainline root=UUID=b9368818-bf02-4af9-a1b8-8a9e91b3eacb rw nvidia_drm.modeset=1 resume=UUID=5325012b-9a0c-4d0f-ae35-a327406cd0b4 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009bfefff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009bff000-0x0000000009ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000a20d000-0x000000009b5d7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000009b5d8000-0x000000009b5d8fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009b5d9000-0x00000000ab4bffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ab4c0000-0x00000000ac9d9fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ac9da000-0x00000000aca29fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000aca2a000-0x00000000acbdafff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000acbdb000-0x00000000ad55bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ad55c000-0x00000000ad5fefff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000ad5ff000-0x00000000adffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ae000000-0x00000000afffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042f33ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000042f340000-0x00000004701fffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] efi: EFI v2.7 by American Megatrends [ 0.000000] efi: ACPI=0xaca29000 ACPI 2.0=0xaca29014 TPMFinalLog=0xacb95000 SMBIOS=0xad402000 SMBIOS 3.0=0xad401000 MEMATTR=0xaa0d3018 ESRT=0xa7cc6018 MOKvar=0xad457000 [ 0.000000] efi: Remove mem240: MMIO range=[0xf0000000-0xf7ffffff] (128MB) from e820 map [ 0.000000] e820: remove [mem 0xf0000000-0xf7ffffff] reserved [ 0.000000] efi: Remove mem241: MMIO range=[0xfd000000-0xfedfffff] (30MB) from e820 map [ 0.000000] e820: remove [mem 0xfd000000-0xfedfffff] reserved [ 0.000000] efi: Not removing mem242: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map [ 0.000000] efi: Remove mem243: MMIO range=[0xfee01000-0xffffffff] (17MB) from e820 map [ 0.000000] e820: remove [mem 0xfee01000-0xffffffff] reserved [ 0.000000] efi: Remove mem245: MMIO range=[0x450000000-0x4701fffff] (514MB) from e820 map [ 0.000000] e820: remove [mem 0x450000000-0x4701fffff] reserved [ 0.000000] SMBIOS 3.2.0 present. [ 0.000000] DMI: ASUSTeK COMPUTER INC. ASUS TUF Gaming A15 FA506IV_FX506IV/FA506IV, BIOS FA506IV.320 06/01/2022 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2894.353 MHz processor [ 0.000211] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000213] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000218] last_pfn = 0x42f340 max_arch_pfn = 0x400000000 [ 0.000224] MTRR map: 5 entries (3 fixed + 2 variable; max 20), built from 9 variable MTRRs [ 0.000226] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000397] e820: update [mem 0xb0000000-0xffffffff] usable ==> reserved [ 0.000404] last_pfn = 0xae000 max_arch_pfn = 0x400000000 [ 0.003705] esrt: Reserving ESRT space from 0x00000000a7cc6018 to 0x00000000a7cc6050. [ 0.003710] e820: update [mem 0xa7cc6000-0xa7cc6fff] usable ==> reserved [ 0.003733] Using GB pages for direct mapping [ 0.004213] Secure boot disabled [ 0.004214] RAMDISK: [mem 0x1f46d000-0x2ba2dfff] [ 0.004218] ACPI: Early table checksum verification disabled [ 0.004220] ACPI: RSDP 0x00000000ACA29014 000024 (v02 _ASUS_) [ 0.004224] ACPI: XSDT 0x00000000ACA28728 0000E4 (v01 _ASUS_ Notebook 01072009 AMI 01000013) [ 0.004228] ACPI: FACP 0x00000000ACA1D000 000114 (v06 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.004232] ACPI: DSDT 0x00000000ACA12000 00A0F8 (v02 _ASUS_ Notebook 01072009 INTL 20120913) [ 0.004234] ACPI: FACS 0x00000000ACB93000 000040 [ 0.004236] ACPI: MSDM 0x00000000ACA27000 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001) [ 0.004238] ACPI: SSDT 0x00000000ACA1F000 007216 (v02 AMD AmdTable 00000002 MSFT 04000000) [ 0.004240] ACPI: IVRS 0x00000000ACA1E000 0001A4 (v02 AMD AmdTable 00000001 AMD 00000000) [ 0.004242] ACPI: FIDT 0x00000000ACA11000 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.004244] ACPI: MCFG 0x00000000ACA10000 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00010013) [ 0.004246] ACPI: HPET 0x00000000ACA0F000 000038 (v01 _ASUS_ Notebook 01072009 AMI 00000005) [ 0.004248] ACPI: VFCT 0x00000000ACA01000 00D484 (v01 _ASUS_ Notebook 00000001 AMD 31504F47) [ 0.004250] ACPI: BGRT 0x00000000ACA00000 000038 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.004251] ACPI: TPM2 0x00000000AC9FF000 00004C (v04 _ASUS_ Notebook 00000001 AMI 00000000) [ 0.004253] ACPI: SSDT 0x00000000AC9FB000 0039F4 (v01 AMD AmdTable 00000001 AMD 00000001) [ 0.004255] ACPI: CRAT 0x00000000AC9FA000 000F28 (v01 AMD AmdTable 00000001 AMD 00000001) [ 0.004257] ACPI: CDIT 0x00000000AC9F9000 000029 (v01 AMD AmdTable 00000001 AMD 00000001) [ 0.004259] ACPI: SSDT 0x00000000AC9F8000 0000B9 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.004261] ACPI: SSDT 0x00000000AC9F7000 000D37 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.004263] ACPI: SSDT 0x00000000AC9F5000 0010A5 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.004265] ACPI: SSDT 0x00000000AC9F4000 000A92 (v01 AsusQO Nv18dGPU 00000001 INTL 20120913) [ 0.004267] ACPI: SSDT 0x00000000AC9F0000 0030C8 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.004269] ACPI: WSMT 0x00000000AC9EF000 000028 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.004271] ACPI: APIC 0x00000000AC9EE000 0000DE (v03 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.004273] ACPI: SSDT 0x00000000AC9ED000 00007D (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.004275] ACPI: SSDT 0x00000000AC9EC000 000517 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.004277] ACPI: SSDT 0x00000000AC9EB000 0006DB (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.004278] ACPI: FPDT 0x00000000AC9EA000 000044 (v01 _ASUS_ A M I 01072009 AMI 01000013) [ 0.004280] ACPI: Reserving FACP table memory at [mem 0xaca1d000-0xaca1d113] [ 0.004281] ACPI: Reserving DSDT table memory at [mem 0xaca12000-0xaca1c0f7] [ 0.004282] ACPI: Reserving FACS table memory at [mem 0xacb93000-0xacb9303f] [ 0.004282] ACPI: Reserving MSDM table memory at [mem 0xaca27000-0xaca27054] [ 0.004283] ACPI: Reserving SSDT table memory at [mem 0xaca1f000-0xaca26215] [ 0.004283] ACPI: Reserving IVRS table memory at [mem 0xaca1e000-0xaca1e1a3] [ 0.004284] ACPI: Reserving FIDT table memory at [mem 0xaca11000-0xaca1109b] [ 0.004284] ACPI: Reserving MCFG table memory at [mem 0xaca10000-0xaca1003b] [ 0.004285] ACPI: Reserving HPET table memory at [mem 0xaca0f000-0xaca0f037] [ 0.004285] ACPI: Reserving VFCT table memory at [mem 0xaca01000-0xaca0e483] [ 0.004286] ACPI: Reserving BGRT table memory at [mem 0xaca00000-0xaca00037] [ 0.004286] ACPI: Reserving TPM2 table memory at [mem 0xac9ff000-0xac9ff04b] [ 0.004287] ACPI: Reserving SSDT table memory at [mem 0xac9fb000-0xac9fe9f3] [ 0.004287] ACPI: Reserving CRAT table memory at [mem 0xac9fa000-0xac9faf27] [ 0.004288] ACPI: Reserving CDIT table memory at [mem 0xac9f9000-0xac9f9028] [ 0.004289] ACPI: Reserving SSDT table memory at [mem 0xac9f8000-0xac9f80b8] [ 0.004289] ACPI: Reserving SSDT table memory at [mem 0xac9f7000-0xac9f7d36] [ 0.004290] ACPI: Reserving SSDT table memory at [mem 0xac9f5000-0xac9f60a4] [ 0.004290] ACPI: Reserving SSDT table memory at [mem 0xac9f4000-0xac9f4a91] [ 0.004291] ACPI: Reserving SSDT table memory at [mem 0xac9f0000-0xac9f30c7] [ 0.004291] ACPI: Reserving WSMT table memory at [mem 0xac9ef000-0xac9ef027] [ 0.004292] ACPI: Reserving APIC table memory at [mem 0xac9ee000-0xac9ee0dd] [ 0.004292] ACPI: Reserving SSDT table memory at [mem 0xac9ed000-0xac9ed07c] [ 0.004293] ACPI: Reserving SSDT table memory at [mem 0xac9ec000-0xac9ec516] [ 0.004293] ACPI: Reserving SSDT table memory at [mem 0xac9eb000-0xac9eb6da] [ 0.004294] ACPI: Reserving FPDT table memory at [mem 0xac9ea000-0xac9ea043] [ 0.004343] No NUMA configuration found [ 0.004344] Faking a node at [mem 0x0000000000000000-0x000000042f33ffff] [ 0.004346] NODE_DATA(0) allocated [mem 0x42f33b000-0x42f33ffff] [ 0.004367] Zone ranges: [ 0.004368] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.004369] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.004370] Normal [mem 0x0000000100000000-0x000000042f33ffff] [ 0.004371] Device empty [ 0.004372] Movable zone start for each node [ 0.004372] Early memory node ranges [ 0.004373] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.004374] node 0: [mem 0x0000000000100000-0x0000000009bfefff] [ 0.004374] node 0: [mem 0x000000000a000000-0x000000000a1fffff] [ 0.004375] node 0: [mem 0x000000000a20d000-0x000000009b5d7fff] [ 0.004376] node 0: [mem 0x000000009b5d9000-0x00000000ab4bffff] [ 0.004376] node 0: [mem 0x00000000ad5ff000-0x00000000adffffff] [ 0.004377] node 0: [mem 0x0000000100000000-0x000000042f33ffff] [ 0.004379] Initmem setup node 0 [mem 0x0000000000001000-0x000000042f33ffff] [ 0.004382] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.004396] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.004514] On node 0, zone DMA32: 1025 pages in unavailable ranges [ 0.008222] On node 0, zone DMA32: 13 pages in unavailable ranges [ 0.008641] On node 0, zone DMA32: 1 pages in unavailable ranges [ 0.008728] On node 0, zone DMA32: 8511 pages in unavailable ranges [ 0.030571] On node 0, zone Normal: 8192 pages in unavailable ranges [ 0.030601] On node 0, zone Normal: 3264 pages in unavailable ranges [ 0.031042] ACPI: PM-Timer IO Port: 0x808 [ 0.031050] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.031062] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23 [ 0.031067] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55 [ 0.031069] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.031070] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.031074] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.031075] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.031085] e820: update [mem 0xa8671000-0xa869ffff] usable ==> reserved [ 0.031095] smpboot: Allowing 16 CPUs, 0 hotplug CPUs [ 0.031111] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.031113] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.031114] PM: hibernation: Registered nosave memory: [mem 0x09bff000-0x09ffffff] [ 0.031116] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20cfff] [ 0.031117] PM: hibernation: Registered nosave memory: [mem 0x9b5d8000-0x9b5d8fff] [ 0.031118] PM: hibernation: Registered nosave memory: [mem 0xa7cc6000-0xa7cc6fff] [ 0.031120] PM: hibernation: Registered nosave memory: [mem 0xa8671000-0xa869ffff] [ 0.031121] PM: hibernation: Registered nosave memory: [mem 0xab4c0000-0xac9d9fff] [ 0.031121] PM: hibernation: Registered nosave memory: [mem 0xac9da000-0xaca29fff] [ 0.031122] PM: hibernation: Registered nosave memory: [mem 0xaca2a000-0xacbdafff] [ 0.031123] PM: hibernation: Registered nosave memory: [mem 0xacbdb000-0xad55bfff] [ 0.031123] PM: hibernation: Registered nosave memory: [mem 0xad55c000-0xad5fefff] [ 0.031124] PM: hibernation: Registered nosave memory: [mem 0xae000000-0xafffffff] [ 0.031125] PM: hibernation: Registered nosave memory: [mem 0xb0000000-0xfedfffff] [ 0.031125] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.031126] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff] [ 0.031127] [mem 0xb0000000-0xfedfffff] available for PCI devices [ 0.031129] Booting paravirtualized kernel on bare hardware [ 0.031131] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.035472] setup_percpu: NR_CPUS:320 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 [ 0.035970] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144 [ 0.035976] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152 [ 0.035978] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.035998] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-mainline root=UUID=b9368818-bf02-4af9-a1b8-8a9e91b3eacb rw nvidia_drm.modeset=1 resume=UUID=5325012b-9a0c-4d0f-ae35-a327406cd0b4 [ 0.036047] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux-mainline", will be passed to user space. [ 0.036080] random: crng init done [ 0.037698] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.038512] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.038604] Fallback order for Node 0: 0 [ 0.038609] Built 1 zonelists, mobility grouping on. Total pages: 3978810 [ 0.038610] Policy zone: Normal [ 0.038845] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.038882] software IO TLB: area num 16. [ 0.081804] Memory: 15500948K/16168516K available (16384K kernel code, 2141K rwdata, 13200K rodata, 3424K init, 3788K bss, 667308K reserved, 0K cma-reserved) [ 0.082013] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.082039] ftrace: allocating 49106 entries in 192 pages [ 0.088711] ftrace: allocated 192 pages with 2 groups [ 0.088786] Dynamic Preempt: full [ 0.088837] rcu: Preemptible hierarchical RCU implementation. [ 0.088837] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16. [ 0.088838] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.088839] Trampoline variant of Tasks RCU enabled. [ 0.088839] Rude variant of Tasks RCU enabled. [ 0.088839] Tracing variant of Tasks RCU enabled. [ 0.088840] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.088840] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.090723] NR_IRQS: 20736, nr_irqs: 1096, preallocated irqs: 16 [ 0.090911] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.090998] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.091029] Console: colour dummy device 80x25 [ 0.091031] printk: legacy console [tty0] enabled [ 0.091067] ACPI: Core revision 20230628 [ 0.091222] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.091239] APIC: Switch to symmetric I/O mode setup [ 0.092091] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0, rdevid:160 [ 0.092093] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1, rdevid:160 [ 0.092094] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2, rdevid:160 [ 0.092095] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3, rdevid:160 [ 0.092095] AMD-Vi: Using global IVHD EFR:0x206d73ef22254ade, EFR2:0x0 [ 0.092360] APIC: Switched APIC routing to: physical flat [ 0.092943] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.107909] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b86cc133d, max_idle_ns: 440795316050 ns [ 0.107915] Calibrating delay loop (skipped), value calculated using timer frequency.. 5791.90 BogoMIPS (lpj=9647843) [ 0.107932] Zenbleed: please update your microcode for the most optimal fix [ 0.107934] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.107977] LVT offset 1 assigned for vector 0xf9 [ 0.108082] LVT offset 2 assigned for vector 0xf4 [ 0.108108] process: using mwait in idle threads [ 0.108109] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.108110] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0 [ 0.108114] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.108117] Spectre V2 : Mitigation: Retpolines [ 0.108117] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.108118] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.108119] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.108119] RETBleed: Mitigation: untrained return thunk [ 0.108120] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.108121] Spectre V2 : Selecting STIBP always-on mode to complement retbleed mitigation [ 0.108122] Spectre V2 : User space: Mitigation: STIBP always-on protection [ 0.108123] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.108125] Speculative Return Stack Overflow: Mitigation: Safe RET [ 0.108130] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.108131] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.108131] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.108133] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.108134] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.127878] Freeing SMP alternatives memory: 40K [ 0.127881] pid_max: default: 32768 minimum: 301 [ 0.131283] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity [ 0.131312] landlock: Up and running. [ 0.131314] Yama: becoming mindful. [ 0.131319] LSM support for eBPF active [ 0.131362] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.131382] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.238912] smpboot: CPU0: AMD Ryzen 7 4800H with Radeon Graphics (family: 0x17, model: 0x60, stepping: 0x1) [ 0.239129] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1. [ 0.239149] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1. [ 0.239165] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1. [ 0.239190] Performance Events: Fam17h+ core perfctr, AMD PMU driver. [ 0.239197] ... version: 0 [ 0.239198] ... bit width: 48 [ 0.239198] ... generic registers: 6 [ 0.239199] ... value mask: 0000ffffffffffff [ 0.239200] ... max period: 00007fffffffffff [ 0.239202] ... fixed-purpose events: 0 [ 0.239202] ... event mask: 000000000000003f [ 0.239298] signal: max sigframe size: 1776 [ 0.239333] rcu: Hierarchical SRCU implementation. [ 0.239334] rcu: Max phase no-delay instances is 1000. [ 0.241407] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.241589] smp: Bringing up secondary CPUs ... [ 0.241734] smpboot: x86: Booting SMP configuration: [ 0.241735] .... node #0, CPUs: #2 #4 #6 #8 #10 #12 #14 [ 0.249914] TSC synchronization [CPU#0 -> CPU#8]: [ 0.249916] Measured 4727 cycles TSC warp between CPUs, turning off TSC clock. [ 0.251247] tsc: Marking TSC unstable due to check_tsc_sync_source failed [ 0.251360] #1 #3 #5 #7 #9 #11 #13 #15 [ 0.252569] Spectre V2 : Update user space SMT mitigation: STIBP always-on [ 0.254631] smp: Brought up 1 node, 16 CPUs [ 0.254631] smpboot: Max logical packages: 1 [ 0.254631] smpboot: Total of 16 processors activated (92656.43 BogoMIPS) [ 0.255945] devtmpfs: initialized [ 0.255945] x86/mm: Memory block size: 128MB [ 0.259307] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20cfff] (53248 bytes) [ 0.259307] ACPI: PM: Registering ACPI NVS region [mem 0xaca2a000-0xacbdafff] (1773568 bytes) [ 0.259307] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.259307] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.259307] pinctrl core: initialized pinctrl subsystem [ 0.259307] PM: RTC time: 22:41:33, date: 2023-11-25 [ 0.259307] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.259307] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.259333] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.259514] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.259541] audit: initializing netlink subsys (disabled) [ 0.259558] audit: type=2000 audit(1700952093.166:1): state=initialized audit_enabled=0 res=1 [ 0.259558] thermal_sys: Registered thermal governor 'fair_share' [ 0.259558] thermal_sys: Registered thermal governor 'bang_bang' [ 0.259558] thermal_sys: Registered thermal governor 'step_wise' [ 0.259558] thermal_sys: Registered thermal governor 'user_space' [ 0.259558] thermal_sys: Registered thermal governor 'power_allocator' [ 0.259558] cpuidle: using governor ladder [ 0.259558] cpuidle: using governor menu [ 0.261326] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.261434] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.261440] PCI: not using MMCONFIG [ 0.261442] PCI: Using configuration type 1 for base access [ 0.261443] PCI: Using configuration type 1 for extended access [ 0.262171] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.262179] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.262179] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.262179] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.262179] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.262179] ACPI: Added _OSI(Module Device) [ 0.262179] ACPI: Added _OSI(Processor Device) [ 0.262179] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.262179] ACPI: Added _OSI(Processor Aggregator Device) [ 0.287767] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GPP4.WLAN], AE_NOT_FOUND (20230628/dswload2-162) [ 0.287779] fbcon: Taking over console [ 0.287786] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230628/psobject-220) [ 0.287795] ACPI: Skipping parse of AML opcode: Scope (0x0010) [ 0.291581] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.294431] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.298099] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.298753] ACPI: EC: EC started [ 0.298754] ACPI: EC: interrupt blocked [ 0.298916] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.298918] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions [ 0.298920] ACPI: Interpreter enabled [ 0.298940] ACPI: PM: (supports S0 S3 S4 S5) [ 0.298941] ACPI: Using IOAPIC for interrupt routing [ 0.300608] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.300666] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved as ACPI motherboard resource [ 0.300681] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.300683] PCI: Using E820 reservations for host bridge windows [ 0.301192] ACPI: Enabled 6 GPEs in block 00 to 1F [ 0.302797] ACPI: \_SB_.PCI0.GPP4.WRST: New power resource [ 0.305819] ACPI: \_SB_.P0S0: New power resource [ 0.305860] ACPI: \_SB_.P3S0: New power resource [ 0.305980] ACPI: \_SB_.P0S1: New power resource [ 0.306018] ACPI: \_SB_.P3S1: New power resource [ 0.307344] ACPI: \_SB_.PCI0.GPP0.PG00: New power resource [ 0.314066] ACPI: \_SB_.PRWL: New power resource [ 0.315270] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.315277] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.315429] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC] [ 0.315706] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.315719] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge [ 0.316368] PCI host bridge to bus 0000:00 [ 0.316370] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.316372] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.316374] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.316376] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.316378] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 0.316380] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfebfffff window] [ 0.316382] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 0.316384] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.316401] pci 0000:00:00.0: [1022:1630] type 00 class 0x060000 [ 0.316517] pci 0000:00:00.2: [1022:1631] type 00 class 0x080600 [ 0.316628] pci 0000:00:01.0: [1022:1632] type 00 class 0x060000 [ 0.316691] pci 0000:00:01.1: [1022:1633] type 01 class 0x060400 [ 0.316753] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.316912] pci 0000:00:02.0: [1022:1632] type 00 class 0x060000 [ 0.316975] pci 0000:00:02.1: [1022:1634] type 01 class 0x060400 [ 0.316998] pci 0000:00:02.1: enabling Extended Tags [ 0.317038] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold [ 0.317176] pci 0000:00:02.2: [1022:1634] type 01 class 0x060400 [ 0.317199] pci 0000:00:02.2: enabling Extended Tags [ 0.317240] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.317379] pci 0000:00:02.4: [1022:1634] type 01 class 0x060400 [ 0.317401] pci 0000:00:02.4: enabling Extended Tags [ 0.317442] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold [ 0.317571] pci 0000:00:08.0: [1022:1632] type 00 class 0x060000 [ 0.317633] pci 0000:00:08.1: [1022:1635] type 01 class 0x060400 [ 0.317654] pci 0000:00:08.1: enabling Extended Tags [ 0.317686] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.317829] pci 0000:00:08.2: [1022:1635] type 01 class 0x060400 [ 0.317850] pci 0000:00:08.2: enabling Extended Tags [ 0.317882] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold [ 0.318021] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.318161] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.318312] pci 0000:00:18.0: [1022:1448] type 00 class 0x060000 [ 0.318356] pci 0000:00:18.1: [1022:1449] type 00 class 0x060000 [ 0.318397] pci 0000:00:18.2: [1022:144a] type 00 class 0x060000 [ 0.318439] pci 0000:00:18.3: [1022:144b] type 00 class 0x060000 [ 0.318480] pci 0000:00:18.4: [1022:144c] type 00 class 0x060000 [ 0.318520] pci 0000:00:18.5: [1022:144d] type 00 class 0x060000 [ 0.318560] pci 0000:00:18.6: [1022:144e] type 00 class 0x060000 [ 0.318601] pci 0000:00:18.7: [1022:144f] type 00 class 0x060000 [ 0.318758] pci 0000:01:00.0: [10de:1f15] type 00 class 0x030000 [ 0.318770] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff] [ 0.318779] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.318789] pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref] [ 0.318795] pci 0000:01:00.0: reg 0x24: [io 0xf000-0xf07f] [ 0.318801] pci 0000:01:00.0: reg 0x30: [mem 0xfc000000-0xfc07ffff pref] [ 0.318860] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.318934] pci 0000:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x8 link at 0000:00:01.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.319591] pci 0000:01:00.1: [10de:10f9] type 00 class 0x040300 [ 0.319603] pci 0000:01:00.1: reg 0x10: [mem 0xfc080000-0xfc083fff] [ 0.319765] pci 0000:01:00.2: [10de:1ada] type 00 class 0x0c0330 [ 0.319781] pci 0000:01:00.2: reg 0x10: [mem 0xc2000000-0xc203ffff 64bit pref] [ 0.319798] pci 0000:01:00.2: reg 0x1c: [mem 0xc2040000-0xc204ffff 64bit pref] [ 0.319851] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold [ 0.319958] pci 0000:01:00.3: [10de:1adb] type 00 class 0x0c8000 [ 0.319969] pci 0000:01:00.3: reg 0x10: [mem 0xfc084000-0xfc084fff] [ 0.320035] pci 0000:01:00.3: PME# supported from D0 D3hot D3cold [ 0.320160] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.320164] pci 0000:00:01.1: bridge window [io 0xf000-0xffff] [ 0.320167] pci 0000:00:01.1: bridge window [mem 0xfb000000-0xfc0fffff] [ 0.320170] pci 0000:00:01.1: bridge window [mem 0xb0000000-0xc20fffff 64bit pref] [ 0.320228] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.320245] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.320268] pci 0000:02:00.0: reg 0x18: [mem 0xfc904000-0xfc904fff 64bit] [ 0.320282] pci 0000:02:00.0: reg 0x20: [mem 0xfc900000-0xfc903fff 64bit] [ 0.320372] pci 0000:02:00.0: supports D1 D2 [ 0.320374] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.320537] pci 0000:00:02.1: PCI bridge to [bus 02] [ 0.320541] pci 0000:00:02.1: bridge window [io 0xe000-0xefff] [ 0.320544] pci 0000:00:02.1: bridge window [mem 0xfc900000-0xfc9fffff] [ 0.320794] pci 0000:03:00.0: [10ec:c822] type 00 class 0x028000 [ 0.320813] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.320837] pci 0000:03:00.0: reg 0x18: [mem 0xfc800000-0xfc80ffff 64bit] [ 0.320952] pci 0000:03:00.0: supports D1 D2 [ 0.320953] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.321316] pci 0000:00:02.2: PCI bridge to [bus 03] [ 0.321319] pci 0000:00:02.2: bridge window [io 0xd000-0xdfff] [ 0.321322] pci 0000:00:02.2: bridge window [mem 0xfc800000-0xfc8fffff] [ 0.321475] pci 0000:04:00.0: [8086:f1a8] type 00 class 0x010802 [ 0.321496] pci 0000:04:00.0: reg 0x10: [mem 0xfc700000-0xfc703fff 64bit] [ 0.321745] pci 0000:00:02.4: PCI bridge to [bus 04] [ 0.321749] pci 0000:00:02.4: bridge window [mem 0xfc700000-0xfc7fffff] [ 0.321851] pci 0000:05:00.0: [1002:1636] type 00 class 0x030000 [ 0.321862] pci 0000:05:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.321870] pci 0000:05:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref] [ 0.321876] pci 0000:05:00.0: reg 0x20: [io 0xc000-0xc0ff] [ 0.321882] pci 0000:05:00.0: reg 0x24: [mem 0xfc500000-0xfc57ffff] [ 0.321891] pci 0000:05:00.0: enabling Extended Tags [ 0.321904] pci 0000:05:00.0: BAR 0: assigned to efifb [ 0.321942] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.322076] pci 0000:05:00.1: [1002:1637] type 00 class 0x040300 [ 0.322084] pci 0000:05:00.1: reg 0x10: [mem 0xfc5c8000-0xfc5cbfff] [ 0.322105] pci 0000:05:00.1: enabling Extended Tags [ 0.322136] pci 0000:05:00.1: PME# supported from D1 D2 D3hot D3cold [ 0.322221] pci 0000:05:00.2: [1022:15df] type 00 class 0x108000 [ 0.322235] pci 0000:05:00.2: reg 0x18: [mem 0xfc400000-0xfc4fffff] [ 0.322245] pci 0000:05:00.2: reg 0x24: [mem 0xfc5cc000-0xfc5cdfff] [ 0.322253] pci 0000:05:00.2: enabling Extended Tags [ 0.322363] pci 0000:05:00.3: [1022:1639] type 00 class 0x0c0330 [ 0.322374] pci 0000:05:00.3: reg 0x10: [mem 0xfc300000-0xfc3fffff 64bit] [ 0.322398] pci 0000:05:00.3: enabling Extended Tags [ 0.322431] pci 0000:05:00.3: PME# supported from D0 D3hot D3cold [ 0.322522] pci 0000:05:00.4: [1022:1639] type 00 class 0x0c0330 [ 0.322533] pci 0000:05:00.4: reg 0x10: [mem 0xfc200000-0xfc2fffff 64bit] [ 0.322557] pci 0000:05:00.4: enabling Extended Tags [ 0.322589] pci 0000:05:00.4: PME# supported from D0 D3hot D3cold [ 0.322679] pci 0000:05:00.5: [1022:15e2] type 00 class 0x048000 [ 0.322687] pci 0000:05:00.5: reg 0x10: [mem 0xfc580000-0xfc5bffff] [ 0.322708] pci 0000:05:00.5: enabling Extended Tags [ 0.322738] pci 0000:05:00.5: PME# supported from D0 D3hot D3cold [ 0.322824] pci 0000:05:00.6: [1022:15e3] type 00 class 0x040300 [ 0.322832] pci 0000:05:00.6: reg 0x10: [mem 0xfc5c0000-0xfc5c7fff] [ 0.322853] pci 0000:05:00.6: enabling Extended Tags [ 0.322883] pci 0000:05:00.6: PME# supported from D0 D3hot D3cold [ 0.322989] pci 0000:00:08.1: PCI bridge to [bus 05] [ 0.322993] pci 0000:00:08.1: bridge window [io 0xc000-0xcfff] [ 0.322995] pci 0000:00:08.1: bridge window [mem 0xfc200000-0xfc5fffff] [ 0.322999] pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] [ 0.323054] pci 0000:06:00.0: [1022:7901] type 00 class 0x010601 [ 0.323082] pci 0000:06:00.0: reg 0x24: [mem 0xfc601000-0xfc6017ff] [ 0.323091] pci 0000:06:00.0: enabling Extended Tags [ 0.323235] pci 0000:06:00.1: [1022:7901] type 00 class 0x010601 [ 0.323263] pci 0000:06:00.1: reg 0x24: [mem 0xfc600000-0xfc6007ff] [ 0.323272] pci 0000:06:00.1: enabling Extended Tags [ 0.323387] pci 0000:00:08.2: PCI bridge to [bus 06] [ 0.323391] pci 0000:00:08.2: bridge window [mem 0xfc600000-0xfc6fffff] [ 0.324213] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.324295] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.324368] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.324461] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.324541] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.324641] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.324708] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.324775] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.326239] ACPI: EC: interrupt unblocked [ 0.326241] ACPI: EC: event unblocked [ 0.326248] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.326250] ACPI: EC: GPE=0x3 [ 0.326251] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete [ 0.326253] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events [ 0.326329] iommu: Default domain type: Translated [ 0.326329] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.326329] SCSI subsystem initialized [ 0.326329] libata version 3.00 loaded. [ 0.326329] ACPI: bus type USB registered [ 0.326329] usbcore: registered new interface driver usbfs [ 0.326329] usbcore: registered new interface driver hub [ 0.326329] usbcore: registered new device driver usb [ 0.329955] pps_core: LinuxPPS API ver. 1 registered [ 0.329956] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.329960] PTP clock support registered [ 0.329970] EDAC MC: Ver: 3.0.0 [ 0.330234] efivars: Registered efivars operations [ 0.331505] NetLabel: Initializing [ 0.331506] NetLabel: domain hash size = 128 [ 0.331508] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.331529] NetLabel: unlabeled traffic allowed by default [ 0.331535] mctp: management component transport protocol core [ 0.331537] NET: Registered PF_MCTP protocol family [ 0.331541] PCI: Using ACPI for IRQ routing [ 0.335104] PCI: pci_cache_line_size set to 64 bytes [ 0.335529] e820: reserve RAM buffer [mem 0x09bff000-0x0bffffff] [ 0.335531] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] [ 0.335532] e820: reserve RAM buffer [mem 0x9b5d8000-0x9bffffff] [ 0.335533] e820: reserve RAM buffer [mem 0xa7cc6000-0xa7ffffff] [ 0.335534] e820: reserve RAM buffer [mem 0xa8671000-0xabffffff] [ 0.335536] e820: reserve RAM buffer [mem 0xab4c0000-0xabffffff] [ 0.335537] e820: reserve RAM buffer [mem 0xae000000-0xafffffff] [ 0.335538] e820: reserve RAM buffer [mem 0x42f340000-0x42fffffff] [ 0.335594] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.335594] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.335594] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.335594] pci 0000:05:00.0: vgaarb: setting as boot VGA device (overriding previous) [ 0.335594] pci 0000:05:00.0: vgaarb: bridge control possible [ 0.335594] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.335594] vgaarb: loaded [ 0.335594] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.335594] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.337931] clocksource: Switched to clocksource hpet [ 0.339910] VFS: Disk quotas dquot_6.6.0 [ 0.339925] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.340011] pnp: PnP ACPI init [ 0.340135] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.340751] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.340754] system 00:03: [io 0x040b] has been reserved [ 0.340757] system 00:03: [io 0x04d6] has been reserved [ 0.340759] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.340762] system 00:03: [io 0x0c14] has been reserved [ 0.340764] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.340766] system 00:03: [io 0x0c52] has been reserved [ 0.340768] system 00:03: [io 0x0c6c] has been reserved [ 0.340771] system 00:03: [io 0x0c6f] has been reserved [ 0.340773] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.340775] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.340778] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.340780] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.340782] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.340785] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.340787] system 00:03: [io 0x0b00-0x0b0f] has been reserved [ 0.340789] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.340791] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.340794] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.340796] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.340799] system 00:03: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.340802] system 00:03: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.340805] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.340808] system 00:03: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.340810] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.340813] system 00:03: [mem 0xff000000-0xffffffff] has been reserved [ 0.341797] pnp: PnP ACPI: found 4 devices [ 0.348624] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.348778] NET: Registered PF_INET protocol family [ 0.349097] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.353691] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.353748] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.353892] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.354369] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.354583] TCP: Hash tables configured (established 131072 bind 65536) [ 0.354786] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.354863] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.354926] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.355049] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.355062] NET: Registered PF_XDP protocol family [ 0.355091] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.355098] pci 0000:00:01.1: bridge window [io 0xf000-0xffff] [ 0.355105] pci 0000:00:01.1: bridge window [mem 0xfb000000-0xfc0fffff] [ 0.355109] pci 0000:00:01.1: bridge window [mem 0xb0000000-0xc20fffff 64bit pref] [ 0.355116] pci 0000:00:02.1: PCI bridge to [bus 02] [ 0.355120] pci 0000:00:02.1: bridge window [io 0xe000-0xefff] [ 0.355125] pci 0000:00:02.1: bridge window [mem 0xfc900000-0xfc9fffff] [ 0.355133] pci 0000:00:02.2: PCI bridge to [bus 03] [ 0.355136] pci 0000:00:02.2: bridge window [io 0xd000-0xdfff] [ 0.355142] pci 0000:00:02.2: bridge window [mem 0xfc800000-0xfc8fffff] [ 0.355149] pci 0000:00:02.4: PCI bridge to [bus 04] [ 0.355154] pci 0000:00:02.4: bridge window [mem 0xfc700000-0xfc7fffff] [ 0.355163] pci 0000:00:08.1: PCI bridge to [bus 05] [ 0.355167] pci 0000:00:08.1: bridge window [io 0xc000-0xcfff] [ 0.355172] pci 0000:00:08.1: bridge window [mem 0xfc200000-0xfc5fffff] [ 0.355177] pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] [ 0.355183] pci 0000:00:08.2: PCI bridge to [bus 06] [ 0.355188] pci 0000:00:08.2: bridge window [mem 0xfc600000-0xfc6fffff] [ 0.355197] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.355201] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.355205] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.355209] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.355212] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 0.355216] pci_bus 0000:00: resource 9 [mem 0xb0000000-0xfebfffff window] [ 0.355220] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window] [ 0.355224] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.355227] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfc0fffff] [ 0.355231] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc20fffff 64bit pref] [ 0.355235] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.355238] pci_bus 0000:02: resource 1 [mem 0xfc900000-0xfc9fffff] [ 0.355242] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.355245] pci_bus 0000:03: resource 1 [mem 0xfc800000-0xfc8fffff] [ 0.355249] pci_bus 0000:04: resource 1 [mem 0xfc700000-0xfc7fffff] [ 0.355253] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.355256] pci_bus 0000:05: resource 1 [mem 0xfc200000-0xfc5fffff] [ 0.355260] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref] [ 0.355264] pci_bus 0000:06: resource 1 [mem 0xfc600000-0xfc6fffff] [ 0.355506] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec [ 0.355569] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.355640] pci 0000:01:00.2: D0 power state depends on 0000:01:00.0 [ 0.355866] pci 0000:01:00.3: D0 power state depends on 0000:01:00.0 [ 0.356118] pci 0000:05:00.1: D0 power state depends on 0000:05:00.0 [ 0.356147] pci 0000:05:00.3: extending delay after power-on from D3hot to 20 msec [ 0.356299] pci 0000:05:00.4: extending delay after power-on from D3hot to 20 msec [ 0.356394] PCI: CLS 64 bytes, default 64 [ 0.356404] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported [ 0.356455] Trying to unpack rootfs image as initramfs... [ 0.356465] pci 0000:00:01.0: Adding to iommu group 0 [ 0.356483] pci 0000:00:01.1: Adding to iommu group 1 [ 0.356509] pci 0000:00:02.0: Adding to iommu group 2 [ 0.356527] pci 0000:00:02.1: Adding to iommu group 3 [ 0.356546] pci 0000:00:02.2: Adding to iommu group 4 [ 0.356564] pci 0000:00:02.4: Adding to iommu group 5 [ 0.356605] pci 0000:00:08.0: Adding to iommu group 6 [ 0.356622] pci 0000:00:08.1: Adding to iommu group 6 [ 0.356642] pci 0000:00:08.2: Adding to iommu group 6 [ 0.356676] pci 0000:00:14.0: Adding to iommu group 7 [ 0.356693] pci 0000:00:14.3: Adding to iommu group 7 [ 0.356773] pci 0000:00:18.0: Adding to iommu group 8 [ 0.356791] pci 0000:00:18.1: Adding to iommu group 8 [ 0.356808] pci 0000:00:18.2: Adding to iommu group 8 [ 0.356825] pci 0000:00:18.3: Adding to iommu group 8 [ 0.356841] pci 0000:00:18.4: Adding to iommu group 8 [ 0.356859] pci 0000:00:18.5: Adding to iommu group 8 [ 0.356876] pci 0000:00:18.6: Adding to iommu group 8 [ 0.356892] pci 0000:00:18.7: Adding to iommu group 8 [ 0.356939] pci 0000:01:00.0: Adding to iommu group 9 [ 0.356957] pci 0000:01:00.1: Adding to iommu group 9 [ 0.356987] pci 0000:01:00.2: Adding to iommu group 9 [ 0.357005] pci 0000:01:00.3: Adding to iommu group 9 [ 0.357023] pci 0000:02:00.0: Adding to iommu group 10 [ 0.357040] pci 0000:03:00.0: Adding to iommu group 11 [ 0.357057] pci 0000:04:00.0: Adding to iommu group 12 [ 0.357064] pci 0000:05:00.0: Adding to iommu group 6 [ 0.357070] pci 0000:05:00.1: Adding to iommu group 6 [ 0.357076] pci 0000:05:00.2: Adding to iommu group 6 [ 0.357082] pci 0000:05:00.3: Adding to iommu group 6 [ 0.357088] pci 0000:05:00.4: Adding to iommu group 6 [ 0.357094] pci 0000:05:00.5: Adding to iommu group 6 [ 0.357099] pci 0000:05:00.6: Adding to iommu group 6 [ 0.357105] pci 0000:06:00.0: Adding to iommu group 6 [ 0.357111] pci 0000:06:00.1: Adding to iommu group 6 [ 0.358702] pci 0000:00:00.2: can't derive routing for PCI INT A [ 0.358706] pci 0000:00:00.2: PCI INT A: not connected [ 0.358921] AMD-Vi: Extended features (0x206d73ef22254ade, 0x0): PPR X2APIC NX GT IA GA PC GA_vAPIC [ 0.358932] AMD-Vi: Interrupt remapping enabled [ 0.358933] AMD-Vi: X2APIC enabled [ 0.359225] AMD-Vi: Virtual APIC enabled [ 0.359233] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.359234] software IO TLB: mapped [mem 0x00000000a3c5b000-0x00000000a7c5b000] (64MB) [ 0.359296] LVT offset 0 assigned for vector 0x400 [ 0.363803] perf: AMD IBS detected (0x000003ff) [ 0.363820] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 0.367382] Initialise system trusted keyrings [ 0.367392] Key type blacklist registered [ 0.367439] workingset: timestamp_bits=41 max_order=22 bucket_order=0 [ 0.367447] zbud: loaded [ 0.367665] integrity: Platform Keyring initialized [ 0.367669] integrity: Machine keyring initialized [ 0.382947] Key type asymmetric registered [ 0.382949] Asymmetric key parser 'x509' registered [ 0.382966] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) [ 0.383027] io scheduler mq-deadline registered [ 0.383029] io scheduler kyber registered [ 0.383039] io scheduler bfq registered [ 0.384441] pcieport 0000:00:01.1: PME: Signaling with IRQ 28 [ 0.384602] pcieport 0000:00:02.1: PME: Signaling with IRQ 29 [ 0.384729] pcieport 0000:00:02.2: PME: Signaling with IRQ 30 [ 0.384863] pcieport 0000:00:02.4: PME: Signaling with IRQ 31 [ 0.385005] pcieport 0000:00:08.1: PME: Signaling with IRQ 32 [ 0.385225] pcieport 0000:00:08.2: PME: Signaling with IRQ 33 [ 0.385362] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.386994] ACPI: AC: AC Adapter [ACAD] (on-line) [ 0.387064] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.387091] ACPI: button: Power Button [PWRB] [ 0.387136] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.387160] ACPI: button: Sleep Button [SLPB] [ 0.387197] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 0.387243] ACPI: button: Lid Switch [LID0] [ 0.387282] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.390334] ACPI: button: Power Button [PWRF] [ 0.390379] Monitor-Mwait will be used to enter C-1 state [ 0.390385] ACPI: \_SB_.PLTF.P000: Found 3 idle states [ 0.390391] ACPI: FW issue: working around C-state latencies out of order [ 0.390517] ACPI: \_SB_.PLTF.P001: Found 3 idle states [ 0.390523] ACPI: FW issue: working around C-state latencies out of order [ 0.390713] ACPI: \_SB_.PLTF.P002: Found 3 idle states [ 0.390719] ACPI: FW issue: working around C-state latencies out of order [ 0.390904] ACPI: \_SB_.PLTF.P003: Found 3 idle states [ 0.390910] ACPI: FW issue: working around C-state latencies out of order [ 0.391094] ACPI: \_SB_.PLTF.P004: Found 3 idle states [ 0.391100] ACPI: FW issue: working around C-state latencies out of order [ 0.391283] ACPI: \_SB_.PLTF.P005: Found 3 idle states [ 0.391289] ACPI: FW issue: working around C-state latencies out of order [ 0.391477] ACPI: \_SB_.PLTF.P006: Found 3 idle states [ 0.391483] ACPI: FW issue: working around C-state latencies out of order [ 0.391673] ACPI: \_SB_.PLTF.P007: Found 3 idle states [ 0.391679] ACPI: FW issue: working around C-state latencies out of order [ 0.391883] ACPI: \_SB_.PLTF.P008: Found 3 idle states [ 0.391889] ACPI: FW issue: working around C-state latencies out of order [ 0.392078] ACPI: \_SB_.PLTF.P009: Found 3 idle states [ 0.392084] ACPI: FW issue: working around C-state latencies out of order [ 0.392209] ACPI: \_SB_.PLTF.P00A: Found 3 idle states [ 0.392215] ACPI: FW issue: working around C-state latencies out of order [ 0.392407] ACPI: \_SB_.PLTF.P00B: Found 3 idle states [ 0.392413] ACPI: FW issue: working around C-state latencies out of order [ 0.392612] ACPI: \_SB_.PLTF.P00C: Found 3 idle states [ 0.392618] ACPI: FW issue: working around C-state latencies out of order [ 0.392809] ACPI: \_SB_.PLTF.P00D: Found 3 idle states [ 0.392815] ACPI: FW issue: working around C-state latencies out of order [ 0.392945] ACPI: \_SB_.PLTF.P00E: Found 3 idle states [ 0.392951] ACPI: FW issue: working around C-state latencies out of order [ 0.393143] ACPI: \_SB_.PLTF.P00F: Found 3 idle states [ 0.393149] ACPI: FW issue: working around C-state latencies out of order [ 0.393683] ACPI: \_TZ_.THRM: _PSL evaluation failure [ 0.393748] ACPI: \_TZ_.THRM: _AL0 evaluation failure [ 0.393961] ACPI BIOS Error (bug): Could not resolve symbol [\_TZ.THRM._SCP.CTYP], AE_NOT_FOUND (20230628/psargs-330) [ 0.393979] ACPI Error: Aborting method \_TZ.THRM._SCP due to previous error (AE_NOT_FOUND) (20230628/psparse-529) [ 0.394152] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.394154] ACPI: thermal: Thermal Zone [THRM] (54 C) [ 0.394413] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.395592] ACPI: battery: Slot [BAT1] (battery present) [ 0.397636] Non-volatile memory driver v1.3 [ 0.397639] Linux agpgart interface v0.103 [ 0.440489] tpm_crb MSFT0101:00: Disabling hwrng [ 0.441628] ACPI: bus type drm_connector registered [ 0.443693] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0 [ 0.449943] Console: switching to colour frame buffer device 240x67 [ 0.452960] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device [ 0.459728] ahci 0000:06:00.0: version 3.0 [ 0.459924] ahci 0000:06:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 0.459929] ahci 0000:06:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 0.460328] scsi host0: ahci [ 0.460405] ata1: SATA max UDMA/133 abar m2048@0xfc601000 port 0xfc601100 irq 35 lpm-pol 3 [ 0.460555] ahci 0000:06:00.1: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 0.460559] ahci 0000:06:00.1: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 0.460922] scsi host1: ahci [ 0.461045] ata2: SATA max UDMA/133 abar m2048@0xfc600000 port 0xfc600100 irq 37 lpm-pol 3 [ 0.461256] usbcore: registered new interface driver usbserial_generic [ 0.461270] usbserial: USB Serial support registered for generic [ 0.461693] rtc_cmos 00:01: RTC can wake from S4 [ 0.461963] rtc_cmos 00:01: registered as rtc0 [ 0.462003] rtc_cmos 00:01: setting system clock to 2023-11-25T22:41:33 UTC (1700952093) [ 0.462034] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.462089] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 0.462465] ledtrig-cpu: registered to indicate activity on CPUs [ 0.462708] hid: raw HID events driver (C) Jiri Kosina [ 0.462853] drop_monitor: Initializing network drop monitor service [ 0.479376] Initializing XFRM netlink socket [ 0.479440] NET: Registered PF_INET6 protocol family [ 0.619028] Freeing initrd memory: 202500K [ 0.626375] Segment Routing with IPv6 [ 0.626381] RPL Segment Routing with IPv6 [ 0.626408] In-situ OAM (IOAM) with IPv6 [ 0.626479] NET: Registered PF_PACKET protocol family [ 0.629115] microcode: CPU0: patch_level=0x08600104 [ 0.629131] microcode: CPU1: patch_level=0x08600104 [ 0.629156] microcode: CPU2: patch_level=0x08600104 [ 0.629178] microcode: CPU3: patch_level=0x08600104 [ 0.629219] microcode: CPU4: patch_level=0x08600104 [ 0.629252] microcode: CPU5: patch_level=0x08600104 [ 0.629289] microcode: CPU6: patch_level=0x08600104 [ 0.629313] microcode: CPU7: patch_level=0x08600104 [ 0.629352] microcode: CPU8: patch_level=0x08600104 [ 0.629385] microcode: CPU9: patch_level=0x08600104 [ 0.629427] microcode: CPU10: patch_level=0x08600104 [ 0.629460] microcode: CPU11: patch_level=0x08600104 [ 0.629496] microcode: CPU12: patch_level=0x08600104 [ 0.629518] microcode: CPU13: patch_level=0x08600104 [ 0.629558] microcode: CPU14: patch_level=0x08600104 [ 0.629591] microcode: CPU15: patch_level=0x08600104 [ 0.629607] microcode: Microcode Update Driver: v2.2. [ 0.629963] resctrl: L3 allocation detected [ 0.629965] resctrl: MB allocation detected [ 0.629966] resctrl: L3 monitoring detected [ 0.629988] IPI shorthand broadcast: enabled [ 0.632529] registered taskstats version 1 [ 0.633882] Loading compiled-in X.509 certificates [ 0.636819] Loaded X.509 cert 'Build time autogenerated kernel key: 8c24eedc130c647f26c01f67dc84a0563603ceac' [ 0.642120] zswap: loaded using pool zstd/zsmalloc [ 0.644931] Key type .fscrypt registered [ 0.644933] Key type fscrypt-provisioning registered [ 0.645140] integrity: Loading X.509 certificate: UEFI:db [ 0.645639] integrity: Loaded X.509 cert 'Database Key: 6351bd196f1529109bcdfc09cde321ab' [ 0.645640] integrity: Loading X.509 certificate: UEFI:db [ 0.645659] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.645660] integrity: Loading X.509 certificate: UEFI:db [ 0.645674] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.646170] PM: Magic number: 15:378:705 [ 0.653849] RAS: Correctable Errors collector initialized. [ 0.771578] ata1: SATA link down (SStatus 0 SControl 300) [ 0.771577] ata2: SATA link down (SStatus 0 SControl 300) [ 0.771785] Unstable clock detected, switching default tracing clock to "global" If you want to keep using the local clock, then add: "trace_clock=local" on the kernel command line [ 0.771857] clk: Disabling unused clocks [ 0.774333] Freeing unused decrypted memory: 2028K [ 0.774810] Freeing unused kernel image (initmem) memory: 3424K [ 0.799394] Write protecting the kernel read-only data: 30720k [ 0.800436] Freeing unused kernel image (rodata/data gap) memory: 1136K [ 0.854960] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.854966] rodata_test: all tests were successful [ 0.854972] Run /init as init process [ 0.854974] with arguments: [ 0.854975] /init [ 0.854977] with environment: [ 0.854977] HOME=/ [ 0.854978] TERM=linux [ 0.854979] BOOT_IMAGE=/boot/vmlinuz-linux-mainline [ 0.899574] ntfs3: Max link count 4000 [ 0.899577] ntfs3: Enabled Linux POSIX ACLs support [ 0.899578] ntfs3: Read-only LZX/Xpress compression included [ 1.026921] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.027565] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/LNXVIDEO:00/input/input4 [ 1.035962] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.035969] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.036221] xhci_hcd 0000:01:00.2: xHCI Host Controller [ 1.036233] xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 1 [ 1.036869] xhci_hcd 0000:01:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010 [ 1.037198] xhci_hcd 0000:01:00.2: xHCI Host Controller [ 1.037206] xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 2 [ 1.037212] xhci_hcd 0000:01:00.2: Host supports USB 3.1 Enhanced SuperSpeed [ 1.037311] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 1.037317] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.037322] usb usb1: Product: xHCI Host Controller [ 1.037326] usb usb1: Manufacturer: Linux 6.7.0-rc2-1-mainline xhci-hcd [ 1.037330] usb usb1: SerialNumber: 0000:01:00.2 [ 1.037636] hub 1-0:1.0: USB hub found [ 1.037654] hub 1-0:1.0: 2 ports detected [ 1.037694] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.038669] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.038723] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07 [ 1.038729] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.038733] usb usb2: Product: xHCI Host Controller [ 1.038737] usb usb2: Manufacturer: Linux 6.7.0-rc2-1-mainline xhci-hcd [ 1.038741] usb usb2: SerialNumber: 0000:01:00.2 [ 1.038942] hub 2-0:1.0: USB hub found [ 1.038959] hub 2-0:1.0: 4 ports detected [ 1.040943] xhci_hcd 0000:05:00.3: xHCI Host Controller [ 1.040956] xhci_hcd 0000:05:00.3: new USB bus registered, assigned bus number 3 [ 1.041062] xhci_hcd 0000:05:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020200000410 [ 1.041709] xhci_hcd 0000:05:00.3: xHCI Host Controller [ 1.041717] xhci_hcd 0000:05:00.3: new USB bus registered, assigned bus number 4 [ 1.041724] xhci_hcd 0000:05:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 1.041805] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 1.041811] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.041816] usb usb3: Product: xHCI Host Controller [ 1.041821] usb usb3: Manufacturer: Linux 6.7.0-rc2-1-mainline xhci-hcd [ 1.041827] usb usb3: SerialNumber: 0000:05:00.3 [ 1.042133] hub 3-0:1.0: USB hub found [ 1.042152] hub 3-0:1.0: 4 ports detected [ 1.044525] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.044585] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07 [ 1.044591] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.044595] usb usb4: Product: xHCI Host Controller [ 1.044600] usb usb4: Manufacturer: Linux 6.7.0-rc2-1-mainline xhci-hcd [ 1.044604] usb usb4: SerialNumber: 0000:05:00.3 [ 1.044866] hub 4-0:1.0: USB hub found [ 1.044883] hub 4-0:1.0: 2 ports detected [ 1.046658] xhci_hcd 0000:05:00.4: xHCI Host Controller [ 1.046670] xhci_hcd 0000:05:00.4: new USB bus registered, assigned bus number 5 [ 1.046776] xhci_hcd 0000:05:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020200000410 [ 1.047451] xhci_hcd 0000:05:00.4: xHCI Host Controller [ 1.047461] xhci_hcd 0000:05:00.4: new USB bus registered, assigned bus number 6 [ 1.047469] xhci_hcd 0000:05:00.4: Host supports USB 3.1 Enhanced SuperSpeed [ 1.047557] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 1.047563] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.047568] usb usb5: Product: xHCI Host Controller [ 1.047572] usb usb5: Manufacturer: Linux 6.7.0-rc2-1-mainline xhci-hcd [ 1.047576] usb usb5: SerialNumber: 0000:05:00.4 [ 1.047852] hub 5-0:1.0: USB hub found [ 1.047874] hub 5-0:1.0: 4 ports detected [ 1.048171] nvme 0000:04:00.0: platform quirk: setting simple suspend [ 1.048306] nvme nvme0: pci function 0000:04:00.0 [ 1.050391] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.050446] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07 [ 1.050452] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.050455] usb usb6: Product: xHCI Host Controller [ 1.050459] usb usb6: Manufacturer: Linux 6.7.0-rc2-1-mainline xhci-hcd [ 1.050463] usb usb6: SerialNumber: 0000:05:00.4 [ 1.050664] hub 6-0:1.0: USB hub found [ 1.050679] hub 6-0:1.0: 2 ports detected [ 1.057429] nvme nvme0: 8/0/0 default/read/poll queues [ 1.062112] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 [ 1.081542] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.297031] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 1.297055] usb 5-1: new full-speed USB device number 2 using xhci_hcd [ 1.457536] usb 3-1: New USB device found, idVendor=0424, idProduct=4206, bcdDevice= 6.25 [ 1.457544] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.457548] usb 3-1: Product: USB4206 Smart Hub [ 1.457552] usb 3-1: Manufacturer: Microchip [ 1.462580] usb 5-1: New USB device found, idVendor=13d3, idProduct=3548, bcdDevice= 0.00 [ 1.462590] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.462596] usb 5-1: Product: Bluetooth Radio [ 1.462601] usb 5-1: Manufacturer: Realtek [ 1.462605] usb 5-1: SerialNumber: 00e04c000001 [ 1.522521] hub 3-1:1.0: USB hub found [ 1.522789] hub 3-1:1.0: 5 ports detected [ 1.563787] usb 6-2: new SuperSpeed USB device number 2 using xhci_hcd [ 1.585920] usb 4-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd [ 1.605641] usb 4-1: New USB device found, idVendor=0424, idProduct=7206, bcdDevice= 6.25 [ 1.605653] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.605659] usb 4-1: Product: USB7206 Smart Hub [ 1.605664] usb 4-1: Manufacturer: Microchip [ 1.634435] hub 4-1:1.0: USB hub found [ 1.634512] hub 4-1:1.0: 4 ports detected [ 1.730017] usb 3-3: new full-speed USB device number 3 using xhci_hcd [ 1.819656] usb 6-2: New USB device found, idVendor=2109, idProduct=8110, bcdDevice=90.74 [ 1.819664] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.819668] usb 6-2: Product: USB3.0 Hub [ 1.819672] usb 6-2: Manufacturer: VIA Labs, Inc. [ 1.848122] hub 6-2:1.0: USB hub found [ 1.848265] hub 6-2:1.0: 4 ports detected [ 1.893799] usb 3-3: New USB device found, idVendor=413c, idProduct=301c, bcdDevice= 2.44 [ 1.893807] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.893811] usb 3-3: Product: Dell Universal Receiver [ 1.893815] usb 3-3: Manufacturer: Dell Computer Corp [ 1.940352] usb 5-2: new high-speed USB device number 3 using xhci_hcd [ 1.943685] usb 3-1.1: new full-speed USB device number 4 using xhci_hcd [ 2.075742] usb 3-1.1: New USB device found, idVendor=041e, idProduct=324d, bcdDevice= 1.06 [ 2.075753] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.075759] usb 3-1.1: Product: Sound Blaster Play! 3 [ 2.075763] usb 3-1.1: Manufacturer: Creative Technology Ltd [ 2.075768] usb 3-1.1: SerialNumber: 00227344 [ 2.085397] usb 5-2: New USB device found, idVendor=2109, idProduct=2811, bcdDevice=90.70 [ 2.085407] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.085413] usb 5-2: Product: USB2.0 Hub [ 2.085418] usb 5-2: Manufacturer: VIA Labs, Inc. [ 2.130520] usb 4-1.2: new SuperSpeed USB device number 3 using xhci_hcd [ 2.136254] hub 5-2:1.0: USB hub found [ 2.136634] hub 5-2:1.0: 4 ports detected [ 2.167454] usb 4-1.2: New USB device found, idVendor=0bda, idProduct=0412, bcdDevice= 1.66 [ 2.167463] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.167467] usb 4-1.2: Product: USB3.2 Hub [ 2.167471] usb 4-1.2: Manufacturer: Generic [ 2.196156] hub 4-1.2:1.0: USB hub found [ 2.198107] hub 4-1.2:1.0: 1 port detected [ 2.230018] usb 6-2.1: new SuperSpeed USB device number 3 using xhci_hcd [ 2.244872] usb 6-2.1: New USB device found, idVendor=0480, idProduct=a200, bcdDevice= 0.00 [ 2.244882] usb 6-2.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 2.244888] usb 6-2.1: Product: External USB 3.0 [ 2.244893] usb 6-2.1: Manufacturer: TOSHIBA [ 2.244897] usb 6-2.1: SerialNumber: 20141115000616F [ 2.283691] usb 3-4: new high-speed USB device number 5 using xhci_hcd [ 2.317080] usb 6-2.2: new SuperSpeed USB device number 4 using xhci_hcd [ 2.334842] usb 6-2.2: New USB device found, idVendor=0bc2, idProduct=ab26, bcdDevice= 1.09 [ 2.334853] usb 6-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.334859] usb 6-2.2: Product: BUP Slim BK [ 2.334863] usb 6-2.2: Manufacturer: Seagate [ 2.334868] usb 6-2.2: SerialNumber: NA9NGB96 [ 2.447311] usb 3-4: New USB device found, idVendor=13d3, idProduct=56a2, bcdDevice=19.02 [ 2.447322] usb 3-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.447328] usb 3-4: Product: USB2.0 HD UVC WebCam [ 2.447332] usb 3-4: Manufacturer: Azurewave [ 2.447337] usb 3-4: SerialNumber: 0x0001 [ 2.497023] usb 3-1.2: new high-speed USB device number 6 using xhci_hcd [ 2.608905] usb 3-1.2: New USB device found, idVendor=0bda, idProduct=5412, bcdDevice= 1.66 [ 2.608913] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.608917] usb 3-1.2: Product: USB2.1 Hub [ 2.608921] usb 3-1.2: Manufacturer: Generic [ 2.642534] hub 3-1.2:1.0: USB hub found [ 2.644295] hub 3-1.2:1.0: 3 ports detected [ 2.674021] usb 4-1.4: new SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd [ 2.690867] usb 4-1.4: New USB device found, idVendor=0424, idProduct=7216, bcdDevice= 1.95 [ 2.690874] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.690879] usb 4-1.4: Product: USB7216 Smart Hub [ 2.690882] usb 4-1.4: Manufacturer: Microchip [ 2.737985] hub 4-1.4:1.0: USB hub found [ 2.738059] hub 4-1.4:1.0: 3 ports detected [ 2.783781] usb 4-1.2.1: new SuperSpeed USB device number 5 using xhci_hcd [ 2.803331] usb 4-1.2.1: New USB device found, idVendor=413c, idProduct=c015, bcdDevice= 8.21 [ 2.803334] usb 4-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.803336] usb 4-1.2.1: Product: Dell Webcam WB7022 [ 2.803338] usb 4-1.2.1: Manufacturer: Chicony Tech. Inc. [ 2.803339] usb 4-1.2.1: SerialNumber: 5EF0731DB2B2 [ 2.877017] usb 3-1.4: new high-speed USB device number 7 using xhci_hcd [ 2.977161] usb 3-1.4: New USB device found, idVendor=0424, idProduct=4216, bcdDevice= 1.95 [ 2.977169] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.977174] usb 3-1.4: Product: USB4216 Smart Hub [ 2.977177] usb 3-1.4: Manufacturer: Microchip [ 3.025978] hub 3-1.4:1.0: USB hub found [ 3.026282] hub 3-1.4:1.0: 4 ports detected [ 3.043670] usb 3-1.2.2: new full-speed USB device number 8 using xhci_hcd [ 3.176827] usb 3-1.2.2: New USB device found, idVendor=413c, idProduct=d001, bcdDevice=10.18 [ 3.176837] usb 3-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.176843] usb 3-1.2.2: Product: Dell Presence Sensor WB7022 [ 3.176848] usb 3-1.2.2: Manufacturer: ITE Tech. Inc. [ 3.176852] usb 3-1.2.2: SerialNumber: 8120181201 [ 3.223783] usb 4-1.4.2: new SuperSpeed USB device number 6 using xhci_hcd [ 3.241071] usb 4-1.4.2: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=33.00 [ 3.241074] usb 4-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 3.241076] usb 4-1.4.2: Product: USB 10/100/1000 LAN [ 3.241078] usb 4-1.4.2: Manufacturer: Realtek [ 3.241079] usb 4-1.4.2: SerialNumber: 0033000001 [ 3.303728] usb-storage 6-2.1:1.0: USB Mass Storage device detected [ 3.304078] scsi host2: usb-storage 6-2.1:1.0 [ 3.304423] usbcore: registered new interface driver usb-storage [ 3.307212] input: Dell Computer Corp Dell Universal Receiver as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb3/3-3/3-3:1.0/0003:413C:301C.0001/input/input6 [ 3.312036] scsi host3: uas [ 3.312191] usbcore: registered new interface driver uas [ 3.312504] [drm] amdgpu kernel modesetting enabled. [ 3.312530] amdgpu: vga_switcheroo: detected switching method \_SB_.PCI0.GP17.VGA_.ATPX handle [ 3.312688] scsi 3:0:0:0: Direct-Access Seagate BUP Slim BK 0109 PQ: 0 ANSI: 6 [ 3.313134] amdgpu: ATPX version 1, functions 0x00000201 [ 3.313212] amdgpu: ATPX Hybrid Graphics [ 3.313666] usb 3-1.5: new high-speed USB device number 9 using xhci_hcd [ 3.315016] sd 3:0:0:0: [sda] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.315020] sd 3:0:0:0: [sda] 4096-byte physical blocks [ 3.315178] sd 3:0:0:0: [sda] Write Protect is off [ 3.315181] sd 3:0:0:0: [sda] Mode Sense: 53 00 00 08 [ 3.315482] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.315660] sd 3:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 3.315662] sd 3:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes) [ 3.318576] sda: sda1 [ 3.318644] sd 3:0:0:0: [sda] Attached SCSI disk [ 3.318732] amdgpu: Virtual CRAT table created for CPU [ 3.318749] amdgpu: Topology: Add CPU node [ 3.318870] amdgpu 0000:05:00.0: enabling device (0006 -> 0007) [ 3.318914] [drm] initializing kernel modesetting (RENOIR 0x1002:0x1636 0x1043:0x1E21 0xC6). [ 3.319090] [drm] register mmio base: 0xFC500000 [ 3.319092] [drm] register mmio size: 524288 [ 3.322168] [drm] add ip block number 0 [ 3.322171] [drm] add ip block number 1 [ 3.322172] [drm] add ip block number 2 [ 3.322174] [drm] add ip block number 3 [ 3.322176] [drm] add ip block number 4 [ 3.322177] [drm] add ip block number 5 [ 3.322179] [drm] add ip block number 6 [ 3.322180] [drm] add ip block number 7 [ 3.322182] [drm] add ip block number 8 [ 3.322183] [drm] add ip block number 9 [ 3.322196] amdgpu 0000:05:00.0: amdgpu: Fetched VBIOS from VFCT [ 3.322198] amdgpu: ATOM BIOS: 113-RENOIR-025 [ 3.326581] [drm] VCN decode is enabled in VM mode [ 3.326583] [drm] VCN encode is enabled in VM mode [ 3.329169] [drm] JPEG decode is enabled in VM mode [ 3.329171] [drm] MCBP is enabled [ 3.343907] Console: switching to colour dummy device 80x25 [ 3.363932] hid-generic 0003:413C:301C.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell Computer Corp Dell Universal Receiver] on usb-0000:05:00.3-3/input0 [ 3.368063] input: Dell Computer Corp Dell Universal Receiver Mouse as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb3/3-3/3-3:1.1/0003:413C:301C.0002/input/input7 [ 3.368174] input: Dell Computer Corp Dell Universal Receiver Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb3/3-3/3-3:1.1/0003:413C:301C.0002/input/input8 [ 3.381373] amdgpu 0000:05:00.0: vgaarb: deactivate vga console [ 3.381383] amdgpu 0000:05:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled [ 3.381392] amdgpu 0000:05:00.0: amdgpu: MODE2 reset [ 3.381489] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 3.381505] amdgpu 0000:05:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used) [ 3.381512] amdgpu 0000:05:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [ 3.381530] [drm] Detected VRAM RAM=512M, BAR=512M [ 3.381534] [drm] RAM width 128bits DDR4 [ 3.382122] [drm] amdgpu: 512M of VRAM memory ready [ 3.382129] [drm] amdgpu: 7703M of GTT memory ready. [ 3.382175] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 3.382382] [drm] PCIE GART of 1024M enabled. [ 3.382385] [drm] PTB located at 0x000000F41FC00000 [ 3.382873] [drm] Loading DMUB firmware via PSP: version=0x01010028 [ 3.383710] [drm] Found VCN firmware Version ENC: 1.21 DEC: 6 VEP: 0 Revision: 0 [ 3.383721] amdgpu 0000:05:00.0: amdgpu: Will use PSP to load VCN firmware [ 3.409887] usb 3-1.5: New USB device found, idVendor=0424, idProduct=7260, bcdDevice= 6.25 [ 3.409896] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.409900] usb 3-1.5: Product: USB2 Controller Hub [ 3.409904] usb 3-1.5: Manufacturer: Microchip Tech [ 3.423875] input: Dell Computer Corp Dell Universal Receiver System Control as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb3/3-3/3-3:1.1/0003:413C:301C.0002/input/input9 [ 3.424041] hid-generic 0003:413C:301C.0002: input,hidraw1: USB HID v1.11 Mouse [Dell Computer Corp Dell Universal Receiver] on usb-0000:05:00.3-3/input1 [ 3.444317] hid-generic 0003:413C:301C.0003: hiddev96,hidraw2: USB HID v1.11 Device [Dell Computer Corp Dell Universal Receiver] on usb-0000:05:00.3-3/input2 [ 3.456506] input: Creative Technology Ltd Sound Blaster Play! 3 Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb3/3-1/3-1.1/3-1.1:1.3/0003:041E:324D.0004/input/input10 [ 3.480359] usb 3-1.2.3: new high-speed USB device number 10 using xhci_hcd [ 3.507323] hid-generic 0003:0424:7260.0005: hiddev97,hidraw3: USB HID v1.10 Device [Microchip Tech USB2 Controller Hub] on usb-0000:05:00.3-1.5/input1 [ 3.510601] hid-generic 0003:041E:324D.0004: input,hiddev98,hidraw4: USB HID v1.11 Device [Creative Technology Ltd Sound Blaster Play! 3] on usb-0000:05:00.3-1.1/input3 [ 3.532657] input: ITE Tech. Inc. Dell Presence Sensor WB7022 as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb3/3-1/3-1.2/3-1.2.2/3-1.2.2:1.0/0003:413C:D001.0006/input/input12 [ 3.532719] input: ITE Tech. Inc. Dell Presence Sensor WB7022 Mouse as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb3/3-1/3-1.2/3-1.2.2/3-1.2.2:1.0/0003:413C:D001.0006/input/input13 [ 3.532775] input: ITE Tech. Inc. Dell Presence Sensor WB7022 as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb3/3-1/3-1.2/3-1.2.2/3-1.2.2:1.0/0003:413C:D001.0006/input/input14 [ 3.532916] hid-generic 0003:413C:D001.0006: input,hiddev99,hidraw5: USB HID v1.12 Mouse [ITE Tech. Inc. Dell Presence Sensor WB7022] on usb-0000:05:00.3-1.2.2/input0 [ 3.532948] usbcore: registered new interface driver usbhid [ 3.532950] usbhid: USB HID core driver [ 3.624638] input: ITE Tech. Inc. Dell Presence Sensor WB7022 as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb3/3-1/3-1.2/3-1.2.2/3-1.2.2:1.0/0003:413C:D001.0006/input/input15 [ 3.624837] hid-sensor-hub 0003:413C:D001.0006: input,hiddev99,hidraw5: USB HID v1.12 Mouse [ITE Tech. Inc. Dell Presence Sensor WB7022] on usb-0000:05:00.3-1.2.2/input0 [ 3.628895] usb 3-1.2.3: New USB device found, idVendor=0bda, idProduct=1100, bcdDevice= 1.01 [ 3.628900] usb 3-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.628902] usb 3-1.2.3: Product: HID Device [ 3.628904] usb 3-1.2.3: Manufacturer: Realtek [ 3.669848] hid-generic 0003:0BDA:1100.0007: hiddev100,hidraw6: USB HID v1.11 Device [Realtek HID Device] on usb-0000:05:00.3-1.2.3/input0 [ 3.787026] usb 3-1.4.4: new high-speed USB device number 11 using xhci_hcd [ 3.908060] usb 3-1.4.4: New USB device found, idVendor=0424, idProduct=7240, bcdDevice= 2.07 [ 3.908070] usb 3-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.908076] usb 3-1.4.4: Product: USB2 Controller Hub [ 3.908081] usb 3-1.4.4: Manufacturer: Microchip Tech [ 3.980418] [drm] reserve 0x400000 from 0xf41f800000 for PSP TMR [ 4.056947] amdgpu 0000:05:00.0: amdgpu: RAS: optional ras ta ucode is not available [ 4.064736] amdgpu 0000:05:00.0: amdgpu: RAP: optional rap ta ucode is not available [ 4.068817] [drm] psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [ 4.068929] [drm] psp gfx command INVOKE_CMD(0x3) failed and response status is (0x4) [ 4.068931] amdgpu 0000:05:00.0: amdgpu: Secure display: Generic Failure. [ 4.068938] amdgpu 0000:05:00.0: amdgpu: SECUREDISPLAY: query securedisplay TA failed. ret 0x0 [ 4.069134] amdgpu 0000:05:00.0: amdgpu: SMU is initialized successfully! [ 4.070051] [drm] Display Core v3.2.259 initialized on DCN 2.1 [ 4.070056] [drm] DP-HDMI FRL PCON supported [ 4.070595] [drm] DMUB hardware initialized: version=0x01010028 [ 4.191321] [drm] kiq ring mec 2 pipe 1 q 0 [ 4.194236] [drm] VCN decode and encode initialized successfully(under DPG Mode). [ 4.194250] [drm] JPEG decode initialized successfully. [ 4.213320] amdgpu: HMM registered 512MB device memory [ 4.215088] kfd kfd: amdgpu: Allocated 3969056 bytes on gart [ 4.215104] kfd kfd: amdgpu: Total number of KFD nodes to be created: 1 [ 4.215280] amdgpu: Virtual CRAT table created for GPU [ 4.215365] amdgpu: Topology: Add dGPU node [0x1636:0x1002] [ 4.215367] kfd kfd: amdgpu: added device 1002:1636 [ 4.215379] amdgpu 0000:05:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 7 [ 4.215384] amdgpu 0000:05:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [ 4.215385] amdgpu 0000:05:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0 [ 4.215387] amdgpu 0000:05:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0 [ 4.215389] amdgpu 0000:05:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0 [ 4.215390] amdgpu 0000:05:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0 [ 4.215392] amdgpu 0000:05:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0 [ 4.215394] amdgpu 0000:05:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0 [ 4.215395] amdgpu 0000:05:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0 [ 4.215397] amdgpu 0000:05:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0 [ 4.215398] amdgpu 0000:05:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0 [ 4.215400] amdgpu 0000:05:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0 [ 4.215401] amdgpu 0000:05:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 13 on hub 0 [ 4.215403] amdgpu 0000:05:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [ 4.215405] amdgpu 0000:05:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [ 4.215406] amdgpu 0000:05:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [ 4.215408] amdgpu 0000:05:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [ 4.215409] amdgpu 0000:05:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [ 4.217673] [drm] Initialized amdgpu 3.56.0 20150101 for 0000:05:00.0 on minor 1 [ 4.224826] fbcon: amdgpudrmfb (fb0) is primary device [ 4.225059] [drm] DSC precompute is not needed. [ 4.237210] Console: switching to colour frame buffer device 240x67 [ 4.246657] amdgpu 0000:05:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 4.330959] scsi 2:0:0:0: Direct-Access TOSHIBA External USB 3.0 0 PQ: 0 ANSI: 6 [ 4.334272] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 4.334621] sd 2:0:0:0: [sdb] Write Protect is off [ 4.334626] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 4.334965] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.436700] sdb: sdb1 [ 4.436963] sd 2:0:0:0: [sdb] Attached SCSI disk [ 4.506233] EXT4-fs (nvme0n1p6): mounted filesystem b9368818-bf02-4af9-a1b8-8a9e91b3eacb r/w with ordered data mode. Quota mode: none. [ 4.612469] systemd[1]: systemd 254.6-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified) [ 4.612482] systemd[1]: Detected architecture x86-64. [ 4.614436] systemd[1]: Hostname set to . [ 4.781000] systemd[1]: bpf-lsm: LSM BPF program attached [ 5.002298] systemd[1]: /usr/lib/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly. [ 5.005516] systemd[1]: Queued start job for default target Graphical Interface. [ 5.032205] systemd[1]: Created slice Slice /system/modprobe. [ 5.033251] systemd[1]: Created slice Slice /system/systemd-fsck. [ 5.033499] systemd[1]: Created slice User and Session Slice. [ 5.033593] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.033687] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.033874] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.033954] systemd[1]: Reached target Local Encrypted Volumes. [ 5.033998] systemd[1]: Reached target Login Prompts. [ 5.034039] systemd[1]: Reached target Local Integrity Protected Volumes. [ 5.034091] systemd[1]: Reached target Path Units. [ 5.034132] systemd[1]: Reached target Remote File Systems. [ 5.034177] systemd[1]: Reached target Slice Units. [ 5.034224] systemd[1]: Reached target Local Verity Protected Volumes. [ 5.034316] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 5.034458] systemd[1]: Listening on LVM2 poll daemon socket. [ 5.035292] systemd[1]: Listening on Process Core Dump Socket. [ 5.035427] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.035556] systemd[1]: Listening on Journal Socket. [ 5.035706] systemd[1]: Listening on udev Control Socket. [ 5.035813] systemd[1]: Listening on udev Kernel Socket. [ 5.036663] systemd[1]: Mounting Huge Pages File System... [ 5.037442] systemd[1]: Mounting POSIX Message Queue File System... [ 5.038249] systemd[1]: Mounting Kernel Debug File System... [ 5.039048] systemd[1]: Mounting Kernel Trace File System... [ 5.040431] systemd[1]: Starting Create List of Static Device Nodes... [ 5.041723] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 5.043278] systemd[1]: Starting Load Kernel Module configfs... [ 5.044544] systemd[1]: Starting Load Kernel Module dm_mod... [ 5.045615] systemd[1]: Starting Load Kernel Module drm... [ 5.046666] systemd[1]: Starting Load Kernel Module fuse... [ 5.048059] systemd[1]: Starting Load Kernel Module loop... [ 5.048241] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). [ 5.050541] systemd[1]: Starting Journal Service... [ 5.052842] systemd[1]: Starting Load Kernel Modules... [ 5.052969] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f). [ 5.054253] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.055683] systemd[1]: Starting Coldplug All udev Devices... [ 5.058267] systemd[1]: Mounted Huge Pages File System. [ 5.058610] systemd[1]: Mounted POSIX Message Queue File System. [ 5.058841] systemd[1]: Mounted Kernel Debug File System. [ 5.058970] loop: module loaded [ 5.059050] systemd[1]: Mounted Kernel Trace File System. [ 5.064059] systemd-journald[355]: Collecting audit messages is disabled. [ 5.067867] device-mapper: uevent: version 1.0.3 [ 5.068056] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 5.068421] fuse: init (API version 7.39) [ 5.076800] i2c_dev: i2c /dev entries driver [ 5.097451] systemd[1]: Finished Create List of Static Device Nodes. [ 5.097530] EXT4-fs (nvme0n1p6): re-mounted b9368818-bf02-4af9-a1b8-8a9e91b3eacb r/w. Quota mode: none. [ 5.099548] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 5.130893] systemd[1]: Finished Load Kernel Module configfs. [ 5.131794] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 5.167459] systemd[1]: Finished Load Kernel Module dm_mod. [ 5.167949] systemd[1]: Started Journal Service. [ 5.489470] systemd-journald[355]: Received client request to flush runtime journal. [ 5.505600] systemd-journald[355]: /var/log/journal/80a4412da0344f419c61a790576c4aba/system.journal: Journal file uses a different sequence number ID, rotating. [ 5.505607] systemd-journald[355]: Rotating system journal. [ 5.535047] nvidia: loading out-of-tree module taints kernel. [ 5.535060] nvidia: module license 'NVIDIA' taints kernel. [ 5.535062] Disabling lock debugging due to kernel taint [ 5.535067] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 5.535069] nvidia: module license taints kernel. [ 6.189704] Adding 6815740k swap on /dev/nvme0n1p7. Priority:-2 extents:1 across:6815740k SS [ 6.197778] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input16 [ 6.313933] mc: Linux media interface: v0.10 [ 6.314582] acpi_cpufreq: overriding BIOS provided _PSD data [ 6.317631] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer [ 6.317637] RAPL PMU: hw unit of domain package 2^-16 Joules [ 6.319673] nvidia-nvlink: Nvlink Core is being initialized, major device number 510 [ 6.322331] nvidia-gpu 0000:01:00.3: enabling device (0000 -> 0002) [ 6.322382] nvidia 0000:01:00.0: enabling device (0000 -> 0003) [ 6.322722] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 6.322724] ccp 0000:05:00.2: enabling device (0000 -> 0002) [ 6.322733] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 6.324043] ccp 0000:05:00.2: ccp: unable to access the device: you might be running a broken BIOS. [ 6.324337] nvidia 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none [ 6.324453] input: PC Speaker as /devices/platform/pcspkr/input/input17 [ 6.324717] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 6.325234] ccp 0000:05:00.2: tee enabled [ 6.325289] ccp 0000:05:00.2: psp enabled [ 6.335243] cryptd: max_cpu_qlen set to 1000 [ 6.371272] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 545.29.06 Thu Nov 16 01:59:08 UTC 2023 [ 6.453354] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.453556] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.577247] input: ELAN1203:00 04F3:307A Mouse as /devices/platform/AMDI0010:03/i2c-0/i2c-ELAN1203:00/0018:04F3:307A.0008/input/input18 [ 6.577501] input: ELAN1203:00 04F3:307A Touchpad as /devices/platform/AMDI0010:03/i2c-0/i2c-ELAN1203:00/0018:04F3:307A.0008/input/input19 [ 6.577818] hid-generic 0018:04F3:307A.0008: input,hidraw7: I2C HID v1.00 Mouse [ELAN1203:00 04F3:307A] on i2c-ELAN1203:00 [ 6.594338] mousedev: PS/2 mouse device common for all mice [ 6.596782] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 6.597045] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address [ 6.597812] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 6.648780] AVX2 version of gcm_enc/dec engaged. [ 6.649038] AES CTR mode by8 optimization enabled [ 6.649943] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint. [ 6.653345] usbcore: registered new device driver r8152-cfgselector [ 6.657417] asus_wmi: ASUS WMI generic driver loaded [ 6.679883] videodev: Linux video capture interface: v2.00 [ 6.693093] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 545.29.06 Thu Nov 16 01:47:29 UTC 2023 [ 6.930266] r8152-cfgselector 4-1.4.2: reset SuperSpeed USB device number 6 using xhci_hcd [ 6.966741] asus_wmi: Initialization: 0x1 [ 6.967069] asus_wmi: BIOS WMI version: 8.1 [ 6.967316] asus_wmi: SFUN value: 0x4a0061 [ 6.967324] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS [ 6.967331] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue [ 6.967408] Bluetooth: Core ver 2.22 [ 6.967439] NET: Registered PF_BLUETOOTH protocol family [ 6.967441] Bluetooth: HCI device and connection manager initialized [ 6.967447] Bluetooth: HCI socket layer initialized [ 6.967450] Bluetooth: L2CAP socket layer initialized [ 6.967457] Bluetooth: SCO socket layer initialized [ 6.969742] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 6.973323] r8152 4-1.4.2:1.0: load rtl8156b-2 v3 10/20/23 successfully [ 6.988090] snd_rn_pci_acp3x 0000:05:00.5: enabling device (0000 -> 0002) [ 6.994618] r8169 0000:02:00.0 eth0: RTL8168h/8111h, a8:5e:45:37:be:9a, XID 541, IRQ 77 [ 6.994633] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 7.002789] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 7.021761] usb 3-4: Found UVC 1.00 device USB2.0 HD UVC WebCam (13d3:56a2) [ 7.029025] usb 4-1.2.1: Found UVC 1.00 device Dell Webcam WB7022 (413c:c015) [ 7.030138] uvcvideo 4-1.2.1:1.1: Failed to set UVC probe control : -32 (exp. 26). [ 7.032105] uvcvideo 4-1.2.1:1.2: Failed to set UVC probe control : -32 (exp. 26). [ 7.033897] usbcore: registered new interface driver uvcvideo [ 7.034728] asus-nb-wmi asus-nb-wmi: Using throttle_thermal_policy for platform_profile support [ 7.054147] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input20 [ 7.056628] usbcore: registered new interface driver btusb [ 7.060538] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [ 7.062529] Bluetooth: hci0: RTL: rom_version status=0 version=3 [ 7.062533] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [ 7.063532] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [ 7.063745] Bluetooth: hci0: RTL: cfg_sz 6, total sz 35990 [ 7.079761] rtw_8822ce 0000:03:00.0: enabling device (0000 -> 0003) [ 7.082416] rtw_8822ce 0000:03:00.0: Firmware version 9.9.15, H2C version 15 [ 7.083274] rtw_8822ce 0000:03:00.0: WOW Firmware version 9.9.4, H2C version 15 [ 7.086252] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 7.086448] snd_hda_intel 0000:01:00.1: Disabling MSI [ 7.086460] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 7.086567] snd_hda_intel 0000:05:00.1: enabling device (0000 -> 0002) [ 7.086654] snd_hda_intel 0000:05:00.1: Handle vga_switcheroo audio client [ 7.086722] snd_hda_intel 0000:05:00.6: enabling device (0000 -> 0002) [ 7.101064] snd_hda_intel 0000:05:00.1: bound 0000:05:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 7.107761] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:05:00.1/sound/card2/input21 [ 7.108007] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card1/input22 [ 7.109550] ACPI Warning: \_SB.PCI0.GPP0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20230628/nsarguments-61) [ 7.121329] snd_hda_codec_realtek hdaudioC3D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 7.121337] snd_hda_codec_realtek hdaudioC3D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.121340] snd_hda_codec_realtek hdaudioC3D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 7.121343] snd_hda_codec_realtek hdaudioC3D0: mono: mono_out=0x0 [ 7.121345] snd_hda_codec_realtek hdaudioC3D0: inputs: [ 7.121348] snd_hda_codec_realtek hdaudioC3D0: Headset Mic=0x19 [ 7.121350] snd_hda_codec_realtek hdaudioC3D0: Internal Mic=0x12 [ 7.128351] r8152 4-1.4.2:1.0 eth0: v1.12.13 [ 7.140306] asus_wmi: fan_curve_get_factory_default (0x00110024) failed: -19 [ 7.141659] asus_wmi: fan_curve_get_factory_default (0x00110025) failed: -19 [ 7.143705] asus_wmi: fan_curve_get_factory_default (0x00110032) failed: -19 [ 7.154984] usbcore: registered new interface driver r8152 [ 7.159335] ACPI: battery: new extension: ASUS Battery Extension [ 7.195119] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card3/input26 [ 7.221274] usbcore: registered new interface driver cdc_ether [ 7.232427] usbcore: registered new interface driver cdc_ncm [ 7.232587] kvm_amd: TSC scaling supported [ 7.232591] kvm_amd: Nested Virtualization enabled [ 7.232593] kvm_amd: Nested Paging enabled [ 7.232596] kvm_amd: SEV enabled (ASIDs 1 - 14) [ 7.232599] kvm_amd: SEV-ES disabled (ASIDs 0 - 0) [ 7.232615] kvm_amd: Virtual VMLOAD VMSAVE supported [ 7.232616] kvm_amd: Virtual GIF supported [ 7.232618] kvm_amd: LBR virtualization supported [ 7.247272] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card1/input23 [ 7.247301] usbcore: registered new interface driver cdc_wdm [ 7.247341] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card1/input24 [ 7.247467] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card1/input25 [ 7.255556] usbcore: registered new interface driver cdc_mbim [ 7.257329] input: ELAN1203:00 04F3:307A Mouse as /devices/platform/AMDI0010:03/i2c-0/i2c-ELAN1203:00/0018:04F3:307A.0008/input/input27 [ 7.257543] input: ELAN1203:00 04F3:307A Touchpad as /devices/platform/AMDI0010:03/i2c-0/i2c-ELAN1203:00/0018:04F3:307A.0008/input/input28 [ 7.257728] hid-multitouch 0018:04F3:307A.0008: input,hidraw7: I2C HID v1.00 Mouse [ELAN1203:00 04F3:307A] on i2c-ELAN1203:00 [ 7.258434] MCE: In-kernel MCE decoding enabled. [ 7.323187] r8152 4-1.4.2:1.0 enp5s0f3u1u4u2: renamed from eth0 [ 7.376532] Bluetooth: hci0: RTL: fw version 0x0cc6d2e3 [ 7.383430] intel_rapl_common: Found RAPL domain package [ 7.383435] intel_rapl_common: Found RAPL domain core [ 7.507622] Bluetooth: hci0: AOSP extensions version v1.00 [ 7.507630] Bluetooth: hci0: AOSP quality report is supported [ 7.625390] usbcore: registered new interface driver snd-usb-audio [ 7.768308] nvidia-uvm: Loaded the UVM driver, major device number 508. [ 7.778505] Asymmetric key parser 'pkcs8' registered [ 7.949500] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0 [ 7.983008] nvidia-gpu 0000:01:00.3: i2c timeout error e0000000 [ 7.983017] ucsi_ccg 6-0008: i2c_transfer failed -110 [ 7.983021] ucsi_ccg 6-0008: ucsi_ccg_init failed - -110 [ 7.983024] ucsi_ccg: probe of 6-0008 failed with error -110 [ 7.988540] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.988544] Bluetooth: BNEP filters: protocol multicast [ 7.988550] Bluetooth: BNEP socket layer initialized [ 7.990755] Bluetooth: MGMT ver 1.22 [ 7.990968] Bluetooth: ISO socket layer initialized [ 7.999724] NET: Registered PF_ALG protocol family [ 8.440368] Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC) [ 8.653919] r8169 0000:02:00.0 enp2s0: Link is Down [ 10.091730] systemd-journald[355]: /var/log/journal/80a4412da0344f419c61a790576c4aba/user-1000.journal: Journal file uses a different sequence number ID, rotating. [ 11.306834] [drm] [nvidia-drm] [GPU ID 0x00000100] Framebuffer memory not appropriate for scanout [ 11.314188] [drm] [nvidia-drm] [GPU ID 0x00000100] Framebuffer memory not appropriate for scanout [ 11.348897] [drm] [nvidia-drm] [GPU ID 0x00000100] Framebuffer memory not appropriate for scanout [ 11.356035] [drm] [nvidia-drm] [GPU ID 0x00000100] Framebuffer memory not appropriate for scanout [ 11.557530] wlan0: authenticate with 1c:3b:f3:bd:0d:a8 (local address=70:66:55:47:26:b7) [ 11.832294] wlan0: send auth to 1c:3b:f3:bd:0d:a8 (try 1/3) [ 11.835631] wlan0: authenticated [ 11.837008] wlan0: associate with 1c:3b:f3:bd:0d:a8 (try 1/3) [ 11.842189] wlan0: RX AssocResp from 1c:3b:f3:bd:0d:a8 (capab=0x1411 status=0 aid=8) [ 11.842541] wlan0: associated [ 12.150377] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed