[ 0.000000] Linux version 5.18.7+ (user@localhost) (gcc (Gentoo 11.3.0 p4) 11.3.0, GNU ld (Gentoo 2.38 p4) 2.38) #279 SMP PREEMPT_DYNAMIC Wed Jun 29 08:08:39 CEST 2022 [ 0.000000] Command line: BOOT_IMAGE=/kernel-5.18.7 root=/dev/sda6 ro rootfstype=ext4 amdgpu.audio=0 rd.luks.options=discard intel_pstate=active mitigations=off usbhid.kbpoll=1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd49dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd49e000-0x00000000de048fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000de049000-0x00000000de0d5fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000de0d6000-0x00000000de177fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000de178000-0x00000000de976fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000de977000-0x00000000de977fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000de978000-0x00000000de9bafff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000de9bb000-0x00000000df3f5fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df3f6000-0x00000000df7f1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000df7f2000-0x00000000df7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Extreme4, BIOS P2.90 07/11/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3399.920 MHz processor [ 0.000503] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000504] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000508] last_pfn = 0x41f000 max_arch_pfn = 0x400000000 [ 0.001104] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001696] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.001701] last_pfn = 0xdf800 max_arch_pfn = 0x400000000 [ 0.001707] Kernel/User page tables isolation: disabled on command line. [ 0.002191] ACPI: Early table checksum verification disabled [ 0.002194] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.002196] ACPI: XSDT 0x00000000DE169078 00006C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.002200] ACPI: FACP 0x00000000DE172F58 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.002203] ACPI: DSDT 0x00000000DE169178 009DDD (v02 ALASKA A M I 00000022 INTL 20051117) [ 0.002206] ACPI: FACS 0x00000000DE176080 000040 [ 0.002207] ACPI: APIC 0x00000000DE173068 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.002209] ACPI: FPDT 0x00000000DE173100 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.002211] ACPI: MCFG 0x00000000DE173148 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.002212] ACPI: AAFT 0x00000000DE173188 000112 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.002214] ACPI: HPET 0x00000000DE1732A0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.002216] ACPI: SSDT 0x00000000DE1732D8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.002218] ACPI: SSDT 0x00000000DE173648 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.002220] ACPI: BGRT 0x00000000DE1740E0 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.002221] ACPI: Reserving FACP table memory at [mem 0xde172f58-0xde173063] [ 0.002222] ACPI: Reserving DSDT table memory at [mem 0xde169178-0xde172f54] [ 0.002223] ACPI: Reserving FACS table memory at [mem 0xde176080-0xde1760bf] [ 0.002223] ACPI: Reserving APIC table memory at [mem 0xde173068-0xde1730f9] [ 0.002224] ACPI: Reserving FPDT table memory at [mem 0xde173100-0xde173143] [ 0.002225] ACPI: Reserving MCFG table memory at [mem 0xde173148-0xde173183] [ 0.002225] ACPI: Reserving AAFT table memory at [mem 0xde173188-0xde173299] [ 0.002226] ACPI: Reserving HPET table memory at [mem 0xde1732a0-0xde1732d7] [ 0.002227] ACPI: Reserving SSDT table memory at [mem 0xde1732d8-0xde173644] [ 0.002227] ACPI: Reserving SSDT table memory at [mem 0xde173648-0xde1740d9] [ 0.002228] ACPI: Reserving BGRT table memory at [mem 0xde1740e0-0xde174117] [ 0.002241] No NUMA configuration found [ 0.002242] Faking a node at [mem 0x0000000000000000-0x000000041effffff] [ 0.002244] NODE_DATA(0) allocated [mem 0x41efea000-0x41efedfff] [ 0.002257] Zone ranges: [ 0.002257]  DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.002259]  DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.002260]  Normal [mem 0x0000000100000000-0x000000041effffff] [ 0.002261] Movable zone start for each node [ 0.002261] Early memory node ranges [ 0.002261]  node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.002262]  node 0: [mem 0x0000000000100000-0x00000000dd49dfff] [ 0.002263]  node 0: [mem 0x00000000de049000-0x00000000de0d5fff] [ 0.002264]  node 0: [mem 0x00000000de977000-0x00000000de977fff] [ 0.002264]  node 0: [mem 0x00000000de9bb000-0x00000000df3f5fff] [ 0.002265]  node 0: [mem 0x00000000df7f2000-0x00000000df7fffff] [ 0.002266]  node 0: [mem 0x0000000100000000-0x000000041effffff] [ 0.002267] Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff] [ 0.002270] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.002285] On node 0, zone DMA: 99 pages in unavailable ranges [ 0.007477] On node 0, zone DMA32: 2987 pages in unavailable ranges [ 0.007497] On node 0, zone DMA32: 2209 pages in unavailable ranges [ 0.007513] On node 0, zone DMA32: 67 pages in unavailable ranges [ 0.007520] On node 0, zone DMA32: 1020 pages in unavailable ranges [ 0.026778] On node 0, zone Normal: 2048 pages in unavailable ranges [ 0.026812] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.026895] ACPI: PM-Timer IO Port: 0x408 [ 0.026899] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.026908] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.026910] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.026911] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.026913] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.026914] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.026917] TSC deadline timer available [ 0.026918] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.026930] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.026931] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.026932] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.026933] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.026933] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.026934] PM: hibernation: Registered nosave memory: [mem 0xdd49e000-0xde048fff] [ 0.026936] PM: hibernation: Registered nosave memory: [mem 0xde0d6000-0xde177fff] [ 0.026936] PM: hibernation: Registered nosave memory: [mem 0xde178000-0xde976fff] [ 0.026937] PM: hibernation: Registered nosave memory: [mem 0xde978000-0xde9bafff] [ 0.026938] PM: hibernation: Registered nosave memory: [mem 0xdf3f6000-0xdf7f1fff] [ 0.026939] PM: hibernation: Registered nosave memory: [mem 0xdf800000-0xf7ffffff] [ 0.026940] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.026941] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.026941] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.026942] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.026942] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.026943] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.026943] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.026944] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.026944] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.026945] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.026946] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.026947] [mem 0xdf800000-0xf7ffffff] available for PCI devices [ 0.026948] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.030377] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.030511] percpu: Embedded 44 pages/cpu s141992 r8192 d30040 u262144 [ 0.030515] pcpu-alloc: s141992 r8192 d30040 u262144 alloc=1*2097152 [ 0.030517] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.030530] Fallback order for Node 0: 0 [ 0.030532] Built 1 zonelists, mobility grouping on. Total pages: 4116279 [ 0.030533] Policy zone: Normal [ 0.030534] Kernel command line: BOOT_IMAGE=/kernel-5.18.7 root=/dev/sda6 ro rootfstype=ext4 amdgpu.audio=0 rd.luks.options=discard intel_pstate=active mitigations=off usbhid.kbpoll=1 [ 0.030564] Unknown kernel command line parameters "BOOT_IMAGE=/kernel-5.18.7", will be passed to user space. [ 0.031224] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.031573] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.031622] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.072638] Memory: 16340904K/16727108K available (14337K kernel code, 1638K rwdata, 4588K rodata, 1032K init, 1400K bss, 385948K reserved, 0K cma-reserved) [ 0.072671] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.072691] Dynamic Preempt: full [ 0.072711] rcu: Preemptible hierarchical RCU implementation. [ 0.072711]  Trampoline variant of Tasks RCU enabled. [ 0.072712] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.072720] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.075003] Console: colour VGA+ 80x25 [ 0.078950] printk: console [tty0] enabled [ 0.078986] ACPI: Core revision 20211217 [ 0.079069] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.079114] APIC: Switch to symmetric I/O mode setup [ 0.079509] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.084114] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3102031be62, max_idle_ns: 440795203934 ns [ 0.084371] Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.84 BogoMIPS (lpj=3399920) [ 0.084407] pid_max: default: 32768 minimum: 301 [ 0.084481] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.084537] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.084689] CPU0: Thermal monitoring enabled (TM1) [ 0.084729] process: using mwait in idle threads [ 0.084758] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.084786] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.084817] Speculative Store Bypass: Vulnerable [ 0.087469] Freeing SMP alternatives memory: 36K [ 0.088407] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1776 [ 0.088445] smpboot: CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.088554] cblist_init_generic: Setting adjustable number of callback queues. [ 0.088584] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.088621] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.088662] ... version:  3 [ 0.088690] ... bit width:  48 [ 0.088717] ... generic registers:  4 [ 0.088745] ... value mask:  0000ffffffffffff [ 0.088773] ... max period:  00007fffffffffff [ 0.088801] ... fixed-purpose events:  3 [ 0.089369] ... event mask:  000000070000000f [ 0.089460] rcu: Hierarchical SRCU implementation. [ 0.089553] smp: Bringing up secondary CPUs ... [ 0.089626] x86: Booting SMP configuration: [ 0.089654] .... node #0, CPUs:  #1 #2 #3 #4 #5 #6 #7 [ 0.096381] smp: Brought up 1 node, 8 CPUs [ 0.096441] smpboot: Max logical packages: 1 [ 0.096468] smpboot: Total of 8 processors activated (54398.72 BogoMIPS) [ 0.097726] devtmpfs: initialized [ 0.097726] ACPI: PM: Registering ACPI NVS region [mem 0xde0d6000-0xde177fff] (663552 bytes) [ 0.097726] ACPI: PM: Registering ACPI NVS region [mem 0xde978000-0xde9bafff] (274432 bytes) [ 0.097726] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.097726] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.097726] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.097726] audit: initializing netlink subsys (disabled) [ 0.097740] audit: type=2000 audit(1656482994.018:1): state=initialized audit_enabled=0 res=1 [ 0.097740] thermal_sys: Registered thermal governor 'step_wise' [ 0.097740] thermal_sys: Registered thermal governor 'user_space' [ 0.098372] cpuidle: using governor ladder [ 0.098435] cpuidle: using governor menu [ 0.098435] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.098460] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.098496] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.098528] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.098594] PCI: Using configuration type 1 for base access [ 0.098637] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.098759] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.100101] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.100101] cryptd: max_cpu_qlen set to 1000 [ 0.116370] raid6: sse2x4 gen() 21115 MB/s [ 0.133370] raid6: sse2x2 gen() 22366 MB/s [ 0.150370] raid6: sse2x1 gen() 17644 MB/s [ 0.150398] raid6: using algorithm sse2x2 gen() 22366 MB/s [ 0.167369] raid6: .... xor() 12162 MB/s, rmw enabled [ 0.167398] raid6: using ssse3x2 recovery algorithm [ 0.167443] ACPI: Added _OSI(Module Device) [ 0.167471] ACPI: Added _OSI(Processor Device) [ 0.167499] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.167526] ACPI: Added _OSI(Processor Aggregator Device) [ 0.167555] ACPI: Added _OSI(Linux-Dell-Video) [ 0.167582] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.167611] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.170083] ACPI: 3 ACPI AML tables successfully acquired and loaded [ 0.170543] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.CPU0._PPC], AE_NOT_FOUND (20211217/psargs-330) [ 0.170580] ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_NOT_FOUND) (20211217/psparse-529) [ 0.170720] ACPI: Dynamic OEM Table Load: [ 0.170750] ACPI: SSDT 0xFFFF8881001B8200 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.171570] ACPI: Interpreter enabled [ 0.171608] ACPI: PM: (supports S0 S3 S4 S5) [ 0.171636] ACPI: Using IOAPIC for interrupt routing [ 0.171690] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.171842] ACPI: Enabled 16 GPEs in block 00 to 3F [ 0.175537] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.175569] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.175677] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.175777] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.175806] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.175960] PCI host bridge to bus 0000:00 [ 0.175988] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.176018] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.176046] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.176076] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window] [ 0.176105] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window] [ 0.176135] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.176169] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000 [ 0.176234] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.176283] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.176375] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.176420] pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit] [ 0.176506] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.176581] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.176626] pci 0000:00:16.0: reg 0x10: [mem 0xf7f1a000-0xf7f1a00f 64bit] [ 0.176717] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.176789] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.176831] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f18000-0xf7f183ff] [ 0.176931] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.177007] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.177050] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit] [ 0.177143] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.177218] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.177322] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.177402] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400 [ 0.177506] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.177582] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400 [ 0.177686] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.177762] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400 [ 0.177866] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.177943] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400 [ 0.178047] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.178124] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.178166] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f17000-0xf7f173ff] [ 0.178266] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.178343] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100 [ 0.178499] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 0.178537] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.178570] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.178603] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.178637] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.178670] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.178703] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f16000-0xf7f167ff] [ 0.178763] pci 0000:00:1f.2: PME# supported from D3hot [ 0.178829] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.178871] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f15000-0xf7f150ff 64bit] [ 0.178916] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.179005] pci 0000:01:00.0: [1002:67b1] type 00 class 0x030000 [ 0.179045] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.179082] pci 0000:01:00.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref] [ 0.179116] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.179148] pci 0000:01:00.0: reg 0x24: [mem 0xf7e00000-0xf7e3ffff] [ 0.179182] pci 0000:01:00.0: reg 0x30: [mem 0xf7e40000-0xf7e5ffff pref] [ 0.179214] pci 0000:01:00.0: enabling Extended Tags [ 0.179253] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.179322] pci 0000:01:00.0: supports D1 D2 [ 0.179349] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.179386] pci 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.179452] pci 0000:01:00.1: [1002:aac8] type 00 class 0x040300 [ 0.179491] pci 0000:01:00.1: reg 0x10: [mem 0xf7e60000-0xf7e63fff 64bit] [ 0.179547] pci 0000:01:00.1: enabling Extended Tags [ 0.179608] pci 0000:01:00.1: supports D1 D2 [ 0.179676] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.179705] pci 0000:00:01.0:  bridge window [io 0xe000-0xefff] [ 0.179734] pci 0000:00:01.0:  bridge window [mem 0xf7e00000-0xf7efffff] [ 0.179764] pci 0000:00:01.0:  bridge window [mem 0xe0000000-0xf07fffff 64bit pref] [ 0.179822] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.179905] pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601 [ 0.179954] pci 0000:03:00.0: reg 0x10: [io 0xd050-0xd057] [ 0.179994] pci 0000:03:00.0: reg 0x14: [io 0xd040-0xd043] [ 0.180033] pci 0000:03:00.0: reg 0x18: [io 0xd030-0xd037] [ 0.180072] pci 0000:03:00.0: reg 0x1c: [io 0xd020-0xd023] [ 0.180112] pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd01f] [ 0.180151] pci 0000:03:00.0: reg 0x24: [mem 0xf7d00000-0xf7d001ff] [ 0.180327] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.180357] pci 0000:00:1c.3:  bridge window [io 0xd000-0xdfff] [ 0.180371] pci 0000:00:1c.3:  bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.180456] pci 0000:04:00.0: [14e4:16b1] type 00 class 0x020000 [ 0.180515] pci 0000:04:00.0: reg 0x10: [mem 0xf0910000-0xf091ffff 64bit pref] [ 0.180563] pci 0000:04:00.0: reg 0x18: [mem 0xf0900000-0xf090ffff 64bit pref] [ 0.180629] pci 0000:04:00.0: reg 0x30: [mem 0xf7c00000-0xf7c007ff pref] [ 0.180779] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.180896] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.180928] pci 0000:00:1c.4:  bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.180961] pci 0000:00:1c.4:  bridge window [mem 0xf0900000-0xf09fffff 64bit pref] [ 0.181035] pci 0000:05:00.0: [1b21:1080] type 01 class 0x060401 [ 0.181224] pci 0000:00:1c.5: PCI bridge to [bus 05-06] [ 0.181254] pci 0000:00:1c.5:  bridge window [io 0xc000-0xcfff] [ 0.181285] pci 0000:00:1c.5:  bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.181346] pci_bus 0000:06: extended config space not accessible [ 0.181390] pci 0000:06:01.0: [1102:0004] type 00 class 0x040100 [ 0.181447] pci 0000:06:01.0: reg 0x10: [io 0xc000-0xc03f] [ 0.181619] pci 0000:06:01.0: supports D1 D2 [ 0.181687] pci 0000:06:01.1: [1102:7003] type 00 class 0x098000 [ 0.181741] pci 0000:06:01.1: reg 0x10: [io 0xc040-0xc047] [ 0.181912] pci 0000:06:01.1: supports D1 D2 [ 0.181980] pci 0000:06:01.2: [1102:4001] type 00 class 0x0c0010 [ 0.182037] pci 0000:06:01.2: reg 0x10: [mem 0xf7b04000-0xf7b047ff] [ 0.182081] pci 0000:06:01.2: reg 0x14: [mem 0xf7b00000-0xf7b03fff] [ 0.182241] pci 0000:06:01.2: supports D1 D2 [ 0.182269] pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot [ 0.182406] pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode) [ 0.182442] pci 0000:05:00.0:  bridge window [io 0xc000-0xcfff] [ 0.182475] pci 0000:05:00.0:  bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.182511] pci 0000:05:00.0:  bridge window [io 0xc000-0xcfff] (subtractive decode) [ 0.182540] pci 0000:05:00.0:  bridge window [mem 0xf7b00000-0xf7bfffff] (subtractive decode) [ 0.182636] pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.182695] pci 0000:07:00.0: reg 0x10: [mem 0xf7a00000-0xf7a07fff 64bit] [ 0.182881] pci 0000:07:00.0: PME# supported from D3hot D3cold [ 0.182983] pci 0000:00:1c.7: PCI bridge to [bus 07] [ 0.183015] pci 0000:00:1c.7:  bridge window [mem 0xf7a00000-0xf7afffff] [ 0.183385] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.184394] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.184446] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.184499] ACPI: PCI: Interrupt link LNKD configured for IRQ 5 [ 0.184552] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.184581] ACPI: PCI: Interrupt link LNKE disabled [ 0.184633] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.184662] ACPI: PCI: Interrupt link LNKF disabled [ 0.184713] ACPI: PCI: Interrupt link LNKG configured for IRQ 3 [ 0.184764] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.184886] SCSI subsystem initialized [ 0.184918] libata version 3.00 loaded. [ 0.184926] ACPI: bus type USB registered [ 0.184961] usbcore: registered new interface driver usbfs [ 0.184993] usbcore: registered new interface driver hub [ 0.185024] usbcore: registered new device driver usb [ 0.185058] pps_core: LinuxPPS API ver. 1 registered [ 0.185086] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.185121] PTP clock support registered [ 0.185211] PCI: Using ACPI for IRQ routing [ 0.186473] PCI: pci_cache_line_size set to 64 bytes [ 0.186531] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.186533] e820: reserve RAM buffer [mem 0xdd49e000-0xdfffffff] [ 0.186534] e820: reserve RAM buffer [mem 0xde0d6000-0xdfffffff] [ 0.186534] e820: reserve RAM buffer [mem 0xde978000-0xdfffffff] [ 0.186535] e820: reserve RAM buffer [mem 0xdf3f6000-0xdfffffff] [ 0.186536] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff] [ 0.186537] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff] [ 0.186544] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.186544] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.186544] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.186544] vgaarb: loaded [ 0.186544] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.186544] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.189382] clocksource: Switched to clocksource tsc-early [ 0.189454] pnp: PnP ACPI init [ 0.189513] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.189583] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.189613] system 00:01: [io 0x1000-0x100f] has been reserved [ 0.189642] system 00:01: [io 0xffff] has been reserved [ 0.189670] system 00:01: [io 0xffff] has been reserved [ 0.189699] system 00:01: [io 0x0400-0x0453] has been reserved [ 0.189727] system 00:01: [io 0x0458-0x047f] has been reserved [ 0.189756] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.189785] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.189848] system 00:03: [io 0x0454-0x0457] has been reserved [ 0.189913] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.190049] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.190157] pnp 00:06: [dma 0 disabled] [ 0.190270] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.190300] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.190329] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.190358] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.190378] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.190407] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.190436] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.190465] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.190494] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.190523] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.190552] system 00:07: [mem 0xf0a00000-0xf0a00fff] has been reserved [ 0.190644] pnp: PnP ACPI: found 8 devices [ 0.195767] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.195816] NET: Registered PF_INET protocol family [ 0.195969] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.197799] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.197848] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.197879] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.198010] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.198119] TCP: Hash tables configured (established 131072 bind 65536) [ 0.198167] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.198221] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.198292] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.198329] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.198359] pci 0000:00:01.0:  bridge window [io 0xe000-0xefff] [ 0.198397] pci 0000:00:01.0:  bridge window [mem 0xf7e00000-0xf7efffff] [ 0.198426] pci 0000:00:01.0:  bridge window [mem 0xe0000000-0xf07fffff 64bit pref] [ 0.198457] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.198492] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.198521] pci 0000:00:1c.3:  bridge window [io 0xd000-0xdfff] [ 0.198552] pci 0000:00:1c.3:  bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.198587] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.198617] pci 0000:00:1c.4:  bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.198648] pci 0000:00:1c.4:  bridge window [mem 0xf0900000-0xf09fffff 64bit pref] [ 0.198681] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.198710] pci 0000:05:00.0:  bridge window [io 0xc000-0xcfff] [ 0.198745] pci 0000:05:00.0:  bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.198785] pci 0000:00:1c.5: PCI bridge to [bus 05-06] [ 0.198814] pci 0000:00:1c.5:  bridge window [io 0xc000-0xcfff] [ 0.198845] pci 0000:00:1c.5:  bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.198879] pci 0000:00:1c.7: PCI bridge to [bus 07] [ 0.198910] pci 0000:00:1c.7:  bridge window [mem 0xf7a00000-0xf7afffff] [ 0.198945] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.198973] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.199002] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.199032] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.199060] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfeafffff window] [ 0.199089] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.199118] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff] [ 0.199146] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf07fffff 64bit pref] [ 0.199175] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.199204] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.199233] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.199261] pci_bus 0000:04: resource 2 [mem 0xf0900000-0xf09fffff 64bit pref] [ 0.199290] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.199318] pci_bus 0000:05: resource 1 [mem 0xf7b00000-0xf7bfffff] [ 0.199347] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 0.199377] pci_bus 0000:06: resource 1 [mem 0xf7b00000-0xf7bfffff] [ 0.199405] pci_bus 0000:06: resource 4 [io 0xc000-0xcfff] [ 0.199433] pci_bus 0000:06: resource 5 [mem 0xf7b00000-0xf7bfffff] [ 0.199462] pci_bus 0000:07: resource 1 [mem 0xf7a00000-0xf7afffff] [ 0.216470] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x700 took 16438 usecs [ 0.233467] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x700 took 16527 usecs [ 0.233548] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.233608] pci 0000:03:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.233638] pci 0000:05:00.0: Disabling ASPM L0s/L1 [ 0.233762] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.233791] software IO TLB: mapped [mem 0x00000000d949e000-0x00000000dd49e000] (64MB) [ 0.233857] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 0.233887] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 0.233916] RAPL PMU: hw unit of domain package 2^-16 Joules [ 0.233944] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 0.234253] Initialise system trusted keyrings [ 0.234304] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 0.234947] zbud: loaded [ 0.235157] ntfs3: Max link count 4000 [ 0.235185] ntfs3: Read-only LZX/Xpress compression included [ 0.235221] fuse: init (API version 7.36) [ 0.235301] xor: automatically using best checksumming function avx [ 0.235330] Key type asymmetric registered [ 0.235358] Asymmetric key parser 'x509' registered [ 0.235544] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 0.235579] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.235625] io scheduler mq-deadline registered [ 0.235663] io scheduler bfq registered [ 0.236345] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.236393] ACPI: button: Power Button [PWRB] [ 0.236436] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.237388] ACPI: button: Power Button [PWRF] [ 0.237751] ACPI: bus type drm_connector registered [ 0.237788] [drm] amdgpu kernel modesetting enabled. [ 0.237827] amdgpu 0000:01:00.0: vgaarb: deactivate vga console [ 0.238800] Console: switching to colour dummy device 80x25 [ 0.238849] [drm] initializing kernel modesetting (HAWAII 0x1002:0x67B1 0x1682:0x9390 0x80). [ 0.238866] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 0.238871] [drm] register mmio base: 0xF7E00000 [ 0.238873] [drm] register mmio size: 262144 [ 0.238926] [drm] add ip block number 0 [ 0.238928] [drm] add ip block number 1 [ 0.238929] [drm] add ip block number 2 [ 0.238930] [drm] add ip block number 3 [ 0.238931] [drm] add ip block number 4 [ 0.238933] [drm] add ip block number 5 [ 0.238934] [drm] add ip block number 6 [ 0.238935] [drm] add ip block number 7 [ 0.238936] [drm] add ip block number 8 [ 0.238997] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000e7fff window] [ 0.239001] caller pci_map_rom+0x76/0x1d0 mapping multiple BARs [ 0.239005] amdgpu 0000:01:00.0: No more image in the PCI ROM [ 0.239021] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 0.239023] amdgpu: ATOM BIOS: 113-GRENADA_PRO_C671_D5_8GB_HY_OC_W8 [ 0.239033] amdgpu 0000:01:00.0: amdgpu: PCIE atomic ops is not supported [ 0.239050] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 0.239058] amdgpu 0000:01:00.0: amdgpu: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [ 0.239061] amdgpu 0000:01:00.0: amdgpu: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF [ 0.239065] [drm] Detected VRAM RAM=8192M, BAR=256M [ 0.239066] [drm] RAM width 512bits GDDR5 [ 0.239197] [drm] amdgpu: 8192M of VRAM memory ready [ 0.239199] [drm] amdgpu: 8192M of GTT memory ready. [ 0.239206] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 0.239677] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000). [ 0.239796] amdgpu: hwmgr_sw_init smu backed is ci_smu [ 0.239799] [drm] Found UVD firmware Version: 1.64 Family ID: 9 [ 0.240058] [drm] Found VCE firmware Version: 50.10 Binary ID: 2 [ 0.240262] [drm] PCIE gen 2 link speeds already enabled [ 0.254795] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4! [ 0.254810] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4! [ 0.254823] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4! [ 0.254832] [drm] Display Core initialized with v3.2.177! [ 0.319488] [drm] UVD initialized successfully. [ 0.440540] [drm] VCE initialized successfully. [ 0.440830] amdgpu 0000:01:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 11, active_cu_number 40 [ 0.442640] amdgpu 0000:01:00.0: amdgpu: Using BACO for runtime pm [ 0.442808] [drm] Initialized amdgpu 3.46.0 20150101 for 0000:01:00.0 on minor 0 [ 0.445481] fbcon: amdgpudrmfb (fb0) is primary device [ 0.588815] Console: switching to colour frame buffer device 320x90 [ 0.605509] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 0.606060] ahci 0000:00:1f.2: version 3.0 [ 0.616422] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.616455] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 0.631774] scsi host0: ahci [ 0.632043] scsi host1: ahci [ 0.632151] scsi host2: ahci [ 0.632222] scsi host3: ahci [ 0.632270] scsi host4: ahci [ 0.632316] scsi host5: ahci [ 0.632337] ata1: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16100 irq 26 [ 0.632347] ata2: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16180 irq 26 [ 0.632356] ata3: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16200 irq 26 [ 0.632366] ata4: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16280 irq 26 [ 0.632377] ata5: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16300 irq 26 [ 0.632386] ata6: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16380 irq 26 [ 0.632490] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled [ 0.632537] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 0.632548] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 0.632696] scsi host6: ahci [ 0.632768] scsi host7: ahci [ 0.632790] ata7: SATA max UDMA/133 abar m512@0xf7d00000 port 0xf7d00100 irq 27 [ 0.632801] ata8: SATA max UDMA/133 abar m512@0xf7d00000 port 0xf7d00180 irq 27 [ 0.632937] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.632945] ehci-pci: EHCI PCI platform driver [ 0.633004] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.633014] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.633031] ehci-pci 0000:00:1a.0: debug port 2 [ 0.636935] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f18000 [ 0.643389] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.643605] hub 1-0:1.0: USB hub found [ 0.643615] hub 1-0:1.0: 2 ports detected [ 0.643749] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.643759] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.643775] ehci-pci 0000:00:1d.0: debug port 2 [ 0.647679] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f17000 [ 0.654392] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.654600] hub 2-0:1.0: USB hub found [ 0.654610] hub 2-0:1.0: 2 ports detected [ 0.654691] uhci_hcd: USB Universal Host Controller Interface driver [ 0.654755] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.654764] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.655824] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930 [ 0.655930] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.655938] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.655948] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.656074] hub 3-0:1.0: USB hub found [ 0.656086] hub 3-0:1.0: 4 ports detected [ 0.656317] hub 4-0:1.0: USB hub found [ 0.656328] hub 4-0:1.0: 4 ports detected [ 0.656522] xhci_hcd 0000:07:00.0: xHCI Host Controller [ 0.656531] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5 [ 0.719233] xhci_hcd 0000:07:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000 [ 0.719453] xhci_hcd 0000:07:00.0: xHCI Host Controller [ 0.719461] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6 [ 0.719471] xhci_hcd 0000:07:00.0: Host supports USB 3.0 SuperSpeed [ 0.719616] hub 5-0:1.0: USB hub found [ 0.719630] hub 5-0:1.0: 2 ports detected [ 0.719688] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.719796] hub 6-0:1.0: USB hub found [ 0.719809] hub 6-0:1.0: 2 ports detected [ 0.719882] i8042: PNP: No PS/2 controller found. [ 0.719997] mousedev: PS/2 mouse device common for all mice [ 0.720067] rtc_cmos 00:02: RTC can wake from S4 [ 0.720254] rtc_cmos 00:02: registered as rtc0 [ 0.720859] rtc_cmos 00:02: setting system clock to 2022-06-29T06:09:54 UTC (1656482994) [ 0.721444] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.722226] device-mapper: ioctl: 4.46.0-ioctl (2022-02-22) initialised: dm-devel@redhat.com [ 0.722896] intel_pstate: Intel P-state driver initializing [ 0.723809] hid: raw HID events driver (C) Jiri Kosina [ 0.725121] usbcore: registered new interface driver usbhid [ 0.726411] usbhid: USB HID core driver [ 0.727774] NET: Registered PF_PACKET protocol family [ 0.729770] microcode: sig=0x206a7, pf=0x2, revision=0x28 [ 0.731222] microcode: Microcode Update Driver: v2.2. [ 0.731226] IPI shorthand broadcast: enabled [ 0.733786] AVX version of gcm_enc/dec engaged. [ 0.735134] AES CTR mode by8 optimization enabled [ 0.736693] sched_clock: Marking stable (730216269, 6472567)->(816490328, -79801492) [ 0.737416] registered taskstats version 1 [ 0.737979] Loading compiled-in X.509 certificates [ 0.740117] zswap: loaded using pool zstd/zbud [ 0.741966] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 0.744130] Key type encrypted registered [ 0.745725] printk: console [netcon0] enabled [ 0.746283] netconsole: network logging started [ 0.884387] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.900392] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.901618] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 0.944412] ata7: SATA link down (SStatus 0 SControl 300) [ 0.944413] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.944435] ata2: SATA link down (SStatus 0 SControl 300) [ 0.949566] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.950208] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.950848] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.951814] ata5: SATA link down (SStatus 0 SControl 300) [ 0.953120] ata3.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 0.953782] ata3.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.954430] ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 0.955087] ata1.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.955741] ata4.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 0.956405] ata4.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.956982] ata6.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 0.957552] ata6.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.958128] ata1.00: supports DRM functions and may not be fully accessible [ 0.958709] ata1.00: ATA-10: CT1000MX500SSD1, M3CR033, max UDMA/133 [ 0.959287] ata4.00: supports DRM functions and may not be fully accessible [ 0.959865] ata4.00: ATA-10: Crucial_CT525MX300SSD1, M0CR070, max UDMA/133 [ 0.960441] ata3.00: ATA-10: WDC WD40PURX-64NZ6Y0, 80.00A80, max UDMA/133 [ 0.961011] ata6.00: ATAPI: Optiarc DVD RW AD-7200S, 1.0B, max UDMA/100 [ 0.961591] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 0.962906] ata3.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.963515] ata1.00: Features: Trust Dev-Sleep [ 0.964615] ata6.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 0.965294] ata6.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.965878] ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 0.966464] ata1.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.967135] ata6.00: configured for UDMA/100 [ 0.967728] ata1.00: supports DRM functions and may not be fully accessible [ 0.968318] ata3.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 0.968916] ata3.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.969515] ata4.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.970803] ata3.00: configured for UDMA/133 [ 0.971496] ata1.00: configured for UDMA/133 [ 0.972166] scsi 0:0:0:0: Direct-Access ATA CT1000MX500SSD1 033 PQ: 0 ANSI: 5 [ 0.972970] scsi 2:0:0:0: Direct-Access ATA WDC WD40PURX-64N 0A80 PQ: 0 ANSI: 5 [ 0.972998] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.973896] sd 2:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 0.974359] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.974363] ata4.00: Features: Trust Dev-Sleep NCQ-sndrcv NCQ-prio [ 0.974368] sd 0:0:0:0: [sda] Write Protect is off [ 0.974373] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.974385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.974978] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 0.978587] ata4.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 0.979248] sd 2:0:0:0: [sdb] Write Protect is off [ 0.979859] ata4.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.980698] ata4.00: supports DRM functions and may not be fully accessible [ 0.981377]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 > [ 0.981378] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.981388] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.983760] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.986995] ata4.00: configured for UDMA/133 [ 0.987862] scsi 3:0:0:0: Direct-Access ATA Crucial_CT525MX3 R070 PQ: 0 ANSI: 5 [ 0.988921] ata4.00: Enabling discard_zeroes_data [ 0.989694] sd 3:0:0:0: [sdc] 1025610768 512-byte logical blocks: (525 GB/489 GiB) [ 0.990440] sd 3:0:0:0: [sdc] Write Protect is off [ 0.991174] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 0.991182] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.991209] scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-7200S 1.0B PQ: 0 ANSI: 5 [ 0.992048] ata4.00: Enabling discard_zeroes_data [ 0.993575]  sdc: sdc1 sdc2 [ 0.994335] ata4.00: Enabling discard_zeroes_data [ 0.995059] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.014045] hub 1-1:1.0: USB hub found [ 1.015647] hub 1-1:1.0: 6 ports detected [ 1.032067] hub 2-1:1.0: USB hub found [ 1.033406] hub 2-1:1.0: 8 ports detected [ 1.040955]  sdb: sdb1 sdb3 sdb4 sdb5 sdb6 sdb7 [ 1.042739] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.048013] hub 3-1:1.0: USB hub found [ 1.050187] hub 3-1:1.0: 4 ports detected [ 1.152858] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1.186578] hub 4-1:1.0: USB hub found [ 1.189266] hub 4-1:1.0: 4 ports detected [ 1.263396] tsc: Refined TSC clocksource calibration: 3400.023 MHz [ 1.264808] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x31026473058, max_idle_ns: 440795314252 ns [ 1.266276] clocksource: Switched to clocksource tsc [ 1.279393] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 1.308750] ata8: SATA link down (SStatus 0 SControl 300) [ 1.310442] PM: Image not found (code -22) [ 1.313156] EXT4-fs (sda6): mounted filesystem with ordered data mode. Quota mode: disabled. [ 1.314620] VFS: Mounted root (ext4 filesystem) readonly on device 8:6. [ 1.316820] devtmpfs: mounted [ 1.318599] Freeing unused kernel image (initmem) memory: 1032K [ 1.320039] Write protecting the kernel read-only data: 22528k [ 1.322001] Freeing unused kernel image (text/rodata gap) memory: 2044K [ 1.322908] Freeing unused kernel image (rodata/data gap) memory: 1556K [ 1.323383] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd [ 1.323566] rodata_test: all tests were successful [ 1.324881] Run /sbin/init as init process [ 1.325539]  with arguments: [ 1.325539]  /sbin/init [ 1.325540]  with environment: [ 1.325540]  HOME=/ [ 1.325541]  TERM=linux [ 1.325541]  BOOT_IMAGE=/kernel-5.18.7 [ 1.364321] input: SINOWEALTH 2.4G Wireless Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:258A:002F.0001/input/input2 [ 1.366081] hid-generic 0003:258A:002F.0001: input,hidraw0: USB HID v1.10 Mouse [SINOWEALTH 2.4G Wireless Receiver] on usb-0000:00:1a.0-1.1/input0 [ 1.370634] input: SINOWEALTH 2.4G Wireless Receiver Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:258A:002F.0002/input/input3 [ 1.423580] hid-generic 0003:258A:002F.0002: input,hiddev96,hidraw1: USB HID v1.10 Keyboard [SINOWEALTH 2.4G Wireless Receiver] on usb-0000:00:1a.0-1.1/input1 [ 1.430587] hub 3-1.1:1.0: USB hub found [ 1.433679] hub 3-1.1:1.0: 4 ports detected [ 1.489368] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd [ 1.490851] usb 1-1.4: new high-speed USB device number 4 using ehci-pci [ 1.524276] hub 4-1.1:1.0: USB hub found [ 1.527303] hub 4-1.1:1.0: 4 ports detected [ 1.726386] usb 3-1.1.2: new full-speed USB device number 4 using xhci_hcd [ 1.822813] input: CHERRY CHERRY Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2:1.0/0003:046A:00DF.0003/input/input5 [ 1.875498] hid-generic 0003:046A:00DF.0003: input,hidraw2: USB HID v1.11 Keyboard [CHERRY CHERRY Keyboard] on usb-0000:00:14.0-1.1.2/input0 [ 1.877521] input: CHERRY CHERRY Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2:1.1/0003:046A:00DF.0004/input/input6 [ 1.929454] input: CHERRY CHERRY Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2:1.1/0003:046A:00DF.0004/input/input7 [ 1.930240] input: CHERRY CHERRY Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2:1.1/0003:046A:00DF.0004/input/input8 [ 1.931206] hid-generic 0003:046A:00DF.0004: input,hiddev97,hidraw3: USB HID v1.11 Keyboard [CHERRY CHERRY Keyboard] on usb-0000:00:14.0-1.1.2/input1 [ 2.128372] random: crng init done [ 2.865866] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.865943] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.878247] usb-storage 1-1.4:1.0: USB Mass Storage device detected [ 2.878923] scsi host8: usb-storage 1-1.4:1.0 [ 2.882226] usbcore: registered new interface driver usb-storage [ 2.884507] usbcore: registered new interface driver uas [ 2.889130] tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:43:92:27 [ 2.889134] tg3 0000:04:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 2.889137] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.889138] tg3 0000:04:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 2.891932] gameport gameport0: EMU10K1 is pci0000:06:01.1/gameport0, io 0xc040, speed 452kHz [ 2.893441] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 2.896501] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.897349] i2c i2c-5: 4/4 memory slots populated (from DMI) [ 2.898061] i2c i2c-5: Successfully instantiated SPD at 0x50 [ 2.898340] i2c i2c-5: Successfully instantiated SPD at 0x51 [ 2.898824] i2c i2c-5: Successfully instantiated SPD at 0x52 [ 2.899297] i2c i2c-5: Successfully instantiated SPD at 0x53 [ 2.922035] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.922039] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.925965] snd_hda_codec_hdmi hdaudioC2D0: HDMI: ELD buf size is 0, force 128 [ 2.925986] snd_hda_codec_hdmi hdaudioC2D0: HDMI: invalid ELD data byte 0 [ 2.929088] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC898: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 2.929121] snd_hda_codec_realtek hdaudioC1D0:  speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.929125] snd_hda_codec_realtek hdaudioC1D0:  hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 2.929145] snd_hda_codec_realtek hdaudioC1D0:  mono: mono_out=0x0 [ 2.929149] snd_hda_codec_realtek hdaudioC1D0:  dig-out=0x1e/0x0 [ 2.929208] snd_hda_codec_realtek hdaudioC1D0:  inputs: [ 2.929210] snd_hda_codec_realtek hdaudioC1D0:  Front Mic=0x19 [ 2.929212] snd_hda_codec_realtek hdaudioC1D0:  Rear Mic=0x18 [ 2.929213] snd_hda_codec_realtek hdaudioC1D0:  Line=0x1a [ 2.929833] loop: module loaded [ 2.933270] snd_emu10k1 0000:06:01.0: Installing spdif_bug patch: SB Audigy 2 ZS [SB0350] [ 2.935777] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input9 [ 2.935836] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input10 [ 2.936065] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input11 [ 2.938002] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input12 [ 2.938202] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input13 [ 2.938280] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input14 [ 2.942158] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 2.945793] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 2.945839] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 2.945876] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 2.945912] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 [ 2.945953] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19 [ 2.976856] nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290 [ 3.497549] BTRFS: device label debug devid 1 transid 7529 /dev/sdb7 scanned by systemd-udevd (798) [ 3.888342] scsi 8:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0 [ 3.889456] sd 8:0:0:0: [sdd] Media removed, stopped polling [ 3.890503] sd 8:0:0:0: [sdd] Attached SCSI removable disk [ 19.368152] EXT4-fs (sda6): re-mounted. Quota mode: disabled. [ 19.538276] Adding 33554428k swap on /dev/sda9. Priority:-2 extents:1 across:33554428k SSFS [ 19.583664] BTRFS info (device sdb7): flagging fs with big metadata feature [ 19.583673] BTRFS info (device sdb7): force zstd compression, level 15 [ 19.583677] BTRFS info (device sdb7): disk space caching is enabled [ 19.583679] BTRFS info (device sdb7): has skinny extents [ 19.686106] EXT4-fs (sda8): mounted filesystem with ordered data mode. Quota mode: disabled. [ 19.728718] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Quota mode: disabled. [ 19.731500] EXT4-fs (sda11): mounted filesystem with ordered data mode. Quota mode: disabled. [ 19.735091] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. [ 19.737930] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Quota mode: disabled. [ 19.785830] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. [ 19.859155] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. [ 19.963866] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Quota mode: disabled. [ 19.970936] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Quota mode: disabled. [ 21.672300] NET: Registered PF_INET6 protocol family [ 21.672742] Segment Routing with IPv6 [ 21.672750] In-situ OAM (IOAM) with IPv6 [ 23.173333] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 23.176207] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 26.653162] tg3 0000:04:00.0 eth0: Link is up at 1000 Mbps, full duplex [ 26.653176] tg3 0000:04:00.0 eth0: Flow control is on for TX and on for RX [ 26.653182] tg3 0000:04:00.0 eth0: EEE is enabled [ 26.653203] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 38.733122] microcode: updated to revision 0x2f, date = 2019-02-17 [ 38.733155] x86/CPU: CPU features have changed after loading microcode, but might not take effect. [ 38.733156] x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update. [ 38.733162] microcode: Reload completed, microcode revision: 0x2f [ 65.700754] PM: hibernation: hibernation entry [ 65.730067] Filesystems sync: 0.029 seconds [ 65.730073] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 65.731327] OOM killer disabled. [ 65.731490] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff] [ 65.731494] PM: hibernation: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 65.731498] PM: hibernation: Marking nosave pages: [mem 0xdd49e000-0xde048fff] [ 65.731573] PM: hibernation: Marking nosave pages: [mem 0xde0d6000-0xde976fff] [ 65.731628] PM: hibernation: Marking nosave pages: [mem 0xde978000-0xde9bafff] [ 65.731632] PM: hibernation: Marking nosave pages: [mem 0xdf3f6000-0xdf7f1fff] [ 65.731658] PM: hibernation: Marking nosave pages: [mem 0xdf800000-0xffffffff] [ 65.732943] PM: hibernation: Basic memory bitmaps created [ 65.732945] PM: hibernation: Preallocating image memory [ 65.972822] PM: hibernation: Allocated 348354 pages for snapshot [ 65.972825] PM: hibernation: Allocated 1393416 kbytes in 0.23 seconds (6058.33 MB/s) [ 65.972827] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 65.974107] printk: Suspending console(s) (use no_console_suspend to debug) [ 65.977392] serial 00:06: disabled [ 66.195314] amdgpu 0000:01:00.0: amdgpu: BACO reset [ 66.272822] Disabling non-boot CPUs ... [ 66.274225] smpboot: CPU 1 is now offline [ 66.276568] smpboot: CPU 2 is now offline [ 66.278069] smpboot: CPU 3 is now offline [ 66.279705] smpboot: CPU 4 is now offline [ 66.281210] smpboot: CPU 5 is now offline [ 66.282672] smpboot: CPU 6 is now offline [ 66.284375] smpboot: CPU 7 is now offline [ 66.284635] PM: hibernation: Creating image: [ 66.456235] PM: hibernation: Need to copy 357506 pages [ 66.456238] PM: hibernation: Normal pages needed: 357506 + 1024, available pages: 3823992 [ 66.286055] Enabling non-boot CPUs ... [ 66.286178] x86: Booting SMP configuration: [ 66.286179] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 66.286906] microcode: microcode updated early to revision 0x2f, date = 2019-02-17 [ 66.286940] microcode: sig=0x206a7, pf=0x2, revision=0x2f [ 66.289190] CPU1 is up [ 66.289290] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 66.292215] CPU2 is up [ 66.292317] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 66.295159] CPU3 is up [ 66.295258] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 66.297911] CPU4 is up [ 66.298011] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 66.300613] CPU5 is up [ 66.300712] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 66.303242] CPU6 is up [ 66.303341] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 66.305901] CPU7 is up [ 66.354247] usb usb3: root hub lost power or was reset [ 66.354247] usb usb1: root hub lost power or was reset [ 66.354250] usb usb4: root hub lost power or was reset [ 66.354369] usb usb2: root hub lost power or was reset [ 66.354523] xhci_hcd 0000:07:00.0: xHC error in resume, USBSTS 0x401, Reinit [ 66.354526] usb usb5: root hub lost power or was reset [ 66.354527] usb usb6: root hub lost power or was reset [ 66.355499] xhci_hcd 0000:00:14.0: Slot 5 endpoint 2 not removed from BW list! [ 66.355502] xhci_hcd 0000:00:14.0: Slot 5 endpoint 4 not removed from BW list! [ 66.355606] serial 00:06: activated [ 66.356597] tg3 0000:04:00.0 eth0: Link is down [ 66.356606] sd 0:0:0:0: [sda] Starting disk [ 66.356637] sd 2:0:0:0: [sdb] Starting disk [ 66.356661] sd 3:0:0:0: [sdc] Starting disk [ 66.384016] [drm] PCIE gen 2 link speeds already enabled [ 66.384561] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000). [ 66.387893] amdgpu 0000:01:00.0: amdgpu: SRBM_SOFT_RESET=0x00100040 [ 66.614897] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 66.623874] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 66.662048] ata7: SATA link down (SStatus 0 SControl 300) [ 66.662089] ata8: SATA link down (SStatus 0 SControl 300) [ 66.677984] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 66.678007] ata5: SATA link down (SStatus 0 SControl 300) [ 66.678233] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 66.678256] ata2: SATA link down (SStatus 0 SControl 300) [ 66.678276] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 66.678298] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 66.679139] ata3.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 66.679145] ata3.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 66.679150] ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 66.679162] ata1.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 66.679202] ata4.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 66.679209] ata4.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 66.679268] ata1.00: supports DRM functions and may not be fully accessible [ 66.679663] ata4.00: supports DRM functions and may not be fully accessible [ 66.679989] ata6.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 66.679996] ata6.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 66.680486] ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 66.680492] ata1.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 66.680558] ata1.00: supports DRM functions and may not be fully accessible [ 66.681257] ata3.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 66.681264] ata3.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 66.681475] ata1.00: configured for UDMA/133 [ 66.682254] ata3.00: configured for UDMA/133 [ 66.683255] ata6.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 66.683263] ata6.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 66.684338] ata6.00: configured for UDMA/100 [ 66.685470] ata4.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 66.685477] ata4.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 66.685676] ata4.00: supports DRM functions and may not be fully accessible [ 66.690557] ata4.00: configured for UDMA/133 [ 66.690781] ata4.00: Enabling discard_zeroes_data [ 66.743025] usb 3-1: reset high-speed USB device number 2 using xhci_hcd [ 66.936865] [drm] Fence fallback timer expired on ring sdma0 [ 66.992536] usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd [ 67.036872] usb 1-1.4: reset high-speed USB device number 4 using ehci-pci [ 67.176947] usb 3-1.1: reset high-speed USB device number 3 using xhci_hcd [ 67.178898] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [ 67.340551] usb 4-1.1: reset SuperSpeed USB device number 3 using xhci_hcd [ 67.440873] [drm] Fence fallback timer expired on ring sdma0 [ 67.477521] [drm] UVD initialized successfully. [ 67.576929] usb 3-1.1.2: reset full-speed USB device number 4 using xhci_hcd [ 67.598558] [drm] VCE initialized successfully. [ 67.667945] PM: hibernation: Basic memory bitmaps freed [ 67.667948] OOM killer enabled. [ 67.667949] Restarting tasks ... done. [ 67.668364] PM: hibernation: hibernation exit [ 67.673011] snd_hda_codec_hdmi hdaudioC2D0: HDMI: ELD buf size is 0, force 128 [ 67.673025] snd_hda_codec_hdmi hdaudioC2D0: HDMI: invalid ELD data byte 0 [ 69.272170] Adding 33554428k swap on /dev/sda9. Priority:-2 extents:1 across:33554428k SSFS [ 70.113844] tg3 0000:04:00.0 eth0: Link is up at 1000 Mbps, full duplex [ 70.113856] tg3 0000:04:00.0 eth0: Flow control is on for TX and on for RX [ 70.113860] tg3 0000:04:00.0 eth0: EEE is enabled