Linux version 2.6.6 (root@slowpoke) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Mon May 10 12:49:46 PDT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000010000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 256MB LOWMEM available. On node 0 totalpages: 65536 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61440 pages, LIFO batch:15 HighMem zone: 0 pages, LIFO batch:1 DMI 2.0 present. ACPI disabled because your bios is from 99 and too old You can enable it with acpi=force Built 1 zonelists Kernel command line: ro root=LABEL=/ hdd=ide-scsi selinux=0 ide_setup: hdd=ide-scsi Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 449.080 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Memory: 255552k/262144k available (2257k kernel code, 5848k reserved, 624k data, 172k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 886.78 BogoMIPS Security Scaffold v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 008021bf 808029bf 00000000 00000000 CPU: After vendor identify, caps: 008021bf 808029bf 00000000 00000000 CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line) CPU: After all inits, caps: 008021bf 808029bf 00000000 00000002 CPU: AMD-K6(tm) 3D processor stepping 0c Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 347k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf04e0, last bus=0 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router SIS [1039/0008] at 0000:00:01.0 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) audit: initializing netlink socket (disabled) audit(1084232958.120:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API Disabling direct PCI/PCI transfers. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... pnp: SB audio device quirk - increasing port range pnp: AWE32 quirk - adding two ports isapnp: Card 'Creative SB AWE64 PnP' isapnp: 1 Plug & Play card detected total Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:01.1 PCI: Found IRQ 9 for device 0000:00:01.1 IRQ routing conflict for 0000:00:01.1, have irq 11, want irq 9 PCI: Sharing IRQ 9 with 0000:00:01.2 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS5597 ATA 33 controller ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA hda: Maxtor 6Y080P0, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: DVD-ROM BDV212B, ATAPI CD/DVD-ROM drive hdd: LITE-ON LTR-12101B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ide2: I/O resource 0x3EE-0x3EE not free. ide2: ports already in use, skipping probe hda: max request size: 128KiB hda: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(33) hda: hda1 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 > hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } hda: Write Cache FAILED Flushing! hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 4681) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). SCSI subsystem initialized PCI: Found IRQ 9 for device 0000:00:0a.0 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } hda: Write Cache FAILED Flushing! hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } hda: Write Cache FAILED Flushing! hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } hda: Write Cache FAILED Flushing! hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } hda: Write Cache FAILED Flushing! hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } hda: Write Cache FAILED Flushing! hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } hda: Write Cache FAILED Flushing! hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } hda: Write Cache FAILED Flushing! hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } hda: Write Cache FAILED Flushing! hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } hda: Write Cache FAILED Flushing! hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } hda: Write Cache FAILED Flushing! kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 172k freed ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 PCI: Found IRQ 9 for device 0000:00:01.2 IRQ routing conflict for 0000:00:01.1, have irq 11, want irq 9 ohci_hcd 0000:00:01.2: OHCI Host Controller ohci_hcd 0000:00:01.2: irq 9, pci mem d0811000 ohci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usb 1-2: new full speed USB device using address 2 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver EXT3 FS on hda11, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com cdrom: open failed. Adding 522072k swap on /dev/hda12. Priority:-1 extents:1 kjournald starting. Commit interval 5 seconds EXT3 FS on hda10, internal journal EXT3-fs: mounted filesystem with ordered data mode.