[ 0.000000] Allocated 4096 bytes for 4 pacas at c00000000ffff000 [ 0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12, vmemmap = 24 [ 0.000000] Initializing hash mmu with SLB [ 0.000000] Linux version 4.9.184-gentoo (root@T1000) (gcc version 7.4.0 (Gentoo 7.4.0-r2 p1.3) ) #2 SMP Sat Jul 13 18:01:45 CEST 2019 [ 0.000000] Found U4 memory controller & host bridge @ 0xf8000000 revision: 0x42 [ 0.000000] Mapped at 0xd000080080000000 [ 0.000000] Found a Shasta mac-io controller, rev: 0, mapped at 0xd000080080041000 [ 0.000000] PowerMac motherboard: PowerMac G5 Dual Core [ 0.000000] DART table allocated at: c00000007f000000 [ 0.000000] DART IOMMU initialized for U4 type chipset [ 0.000000] Using PowerMac machine description [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] (thread shift is 0) [ 0.000000] ----------------------------------------------------- [ 0.000000] ppc64_pft_size = 0x0 [ 0.000000] phys_mem_size = 0x400000000 [ 0.000000] dcache_bsize = 0x80 [ 0.000000] icache_bsize = 0x80 [ 0.000000] cpu_features = 0x0804806318100448 [ 0.000000] possible = 0x7f7fffff18500649 [ 0.000000] always = 0x0000000018100040 [ 0.000000] cpu_user_features = 0xdc080000 0x00000000 [ 0.000000] mmu_features = 0x0c008001 [ 0.000000] firmware_features = 0x0000000000000000 [ 0.000000] htab_address = 0xc000000470000000 [ 0.000000] htab_hash_mask = 0x1fffff [ 0.000000] ----------------------------------------------------- [ 0.000000] Top of RAM: 0x480000000, Total RAM: 0x400000000 [ 0.000000] Memory hole size: 2048MB [ 0.000000] numa: Initmem setup node 0 [mem 0x00000000-0x47fffffff] [ 0.000000] numa: NODE_DATA [mem 0x46ffb5180-0x46ffbefff] [ 0.000000] Found U4-PCIE PCI host bridge. Firmware bus number: 0->255 [ 0.000000] PCI host bridge /pci@0,f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000 [ 0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0 [ 0.000000] Found U3-HT PCI host bridge. Firmware bus number: 0->239 [ 0.000000] PCI host bridge /ht@0,f2000000 (primary) ranges: [ 0.000000] SMU: Driver 0.7 (c) 2005 Benjamin Herrenschmidt, IBM Corp. [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=952, gen1=951 [ 0.000000] nvram: Active bank is: 0 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] barrier-nospec: using ORI speculation barrier [ 0.000000] barrier-nospec: patched 523 locations [ 0.000000] Top of RAM: 0x480000000, Total RAM: 0x400000000 [ 0.000000] Memory hole size: 2048MB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000047fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000047fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000047fffffff] [ 0.000000] On node 0 totalpages: 4194304 [ 0.000000] DMA zone: 65536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4194304 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 24 pages/cpu s58696 r0 d39608 u524288 [ 0.000000] pcpu-alloc: s58696 r0 d39608 u524288 alloc=1*1048576 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4128768 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: ro root=/dev/sda8 init=/usr/lib/systemd/systemd nouveau.modeset=1 radeon.modeset=0 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Sorting __ex_table... [ 0.000000] Memory: 16145048K/16777216K available (7728K kernel code, 1152K rwdata, 2200K rodata, 384K init, 13258K bss, 632168K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 [ 0.000000] NR_IRQS:512 nr_irqs:512 16 [ 0.000000] mpic: Resetting [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at f8040000, max 2 CPUs [ 0.000000] mpic: ISU size: 124, shift: 7, mask: 7f [ 0.000000] mpic: Initializing for 124 sources [ 0.000000] mpic: Setting up HT PICs workarounds for U3/U4 [ 0.000000] mpic: - HT:01.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:02.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:03.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:04.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:05.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:06.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:07.0 [0x90] vendor 106b device 0053 has 86 irqs [ 0.000000] time_init: decrementer frequency = 33.333333 MHz [ 0.000000] time_init: processor frequency = 2300.000000 MHz [ 0.000003] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x7b00c4bad, max_idle_ns: 440795202744 ns [ 0.000410] clocksource: timebase mult[1e000005] shift[24] registered [ 0.000762] clockevent: decrementer mult[8888887] shift[32] cpu[0] [ 0.000862] Console: colour dummy device 80x25 [ 0.001191] console [tty0] enabled [ 0.001504] bootconsole [udbg0] disabled [ 0.001826] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001831] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001835] ... MAX_LOCK_DEPTH: 48 [ 0.001838] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001842] ... CLASSHASH_SIZE: 4096 [ 0.001846] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001850] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001854] ... CHAINHASH_SIZE: 32768 [ 0.001858] memory used by lock dependency info: 8159 kB [ 0.001862] per task-struct memory footprint: 1920 bytes [ 0.001913] pid_max: default: 32768 minimum: 301 [ 0.004223] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.019024] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.026009] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.026055] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.027911] PowerMac SMP probe found 2 cpus [ 0.028122] KeyWest i2c @0xf8001003 irq 16 /u4@0,f8000000/i2c@f8001000 [ 0.028133] channel 1 bus /u4@0,f8000000/i2c@f8001000/i2c-bus@1 [ 0.028203] KeyWest i2c @0x80018000 irq 27 /ht@0,f2000000/pci@8/mac-io@7/i2c@18000 [ 0.028214] channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0 [ 0.028223] channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0 [ 0.028266] SMU i2c /smu@0,0/smu-i2c-control@0 [ 0.028274] channel b bus /smu@0,0/smu-i2c-control@0/i2c-bus@b [ 0.028285] channel e bus /smu@0,0/smu-i2c-control@0/i2c-bus@e [ 0.028322] Processor timebase sync using platform function [ 0.028330] mpic: requesting IPIs... [ 0.028399] PPC970/FX/MP performance monitor hardware support registered [ 0.032194] Brought up 2 CPUs [ 0.033292] devtmpfs: initialized [ 0.040215] OF: Duplicate name in i2c@18000, renamed to "i2c-bus@0#1" [ 0.075316] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.075357] futex hash table entries: 512 (order: 4, 65536 bytes) [ 0.075557] xor: measuring software checksum speed [ 0.108472] 8regs : 5498.400 MB/sec [ 0.141886] 8regs_prefetch: 4803.600 MB/sec [ 0.175302] 32regs : 5632.800 MB/sec [ 0.208716] 32regs_prefetch: 5181.600 MB/sec [ 0.242132] altivec : 7634.400 MB/sec [ 0.242139] xor: using function: altivec (7634.400 MB/sec) [ 0.242150] prandom: seed boundary self test passed [ 0.242944] prandom: 100 self tests passed [ 0.243484] NET: Registered protocol family 16 [ 0.251861] PCI: Probing PCI hardware [ 0.252222] PCI host bridge to bus 0000:00 [ 0.252234] pci_bus 0000:00: root bus resource [io 0x10000-0x80ffff] (bus address [0x0000-0x7fffff]) [ 0.252248] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff] [ 0.252257] pci_bus 0000:00: root bus resource [mem 0x90000000-0xafffffff] [ 0.252275] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.252288] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff [ 0.252363] pci 0000:00:0b.0: [106b:005b] type 01 class 0x060400 [ 0.252407] PCI: Fixup U4 PCIe bridge range: [mem 0x90000000-0xafffffff] [ 0.252477] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold [ 0.254444] IOMMU table initialized, virtual merging enabled [ 0.254671] pci 0000:0a:00.0: [10de:0141] type 00 class 0x030000 [ 0.254695] pci 0000:0a:00.0: reg 0x10: [mem 0xa1000000-0xa1ffffff] [ 0.254713] pci 0000:0a:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref] [ 0.254730] pci 0000:0a:00.0: reg 0x1c: [mem 0xa0000000-0xa0ffffff 64bit] [ 0.254751] pci 0000:0a:00.0: reg 0x30: [mem 0xa2000000-0xa201ffff pref] [ 0.254997] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.255054] pci 0000:00:0b.0: PCI bridge to [bus 0a] [ 0.255068] pci 0000:00:0b.0: bridge window [io 0x10000-0x1ffff] [ 0.255074] pci 0000:00:0b.0: bridge window [mem 0x90000000-0xafffffff] [ 0.255082] pci 0000:00:0b.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 0.255186] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 0a [ 0.255381] PCI host bridge to bus 0001:00 [ 0.255391] pci_bus 0001:00: root bus resource [io 0x811000-0xc10fff] (bus address [0x0000-0x3fffff]) [ 0.255405] pci_bus 0001:00: root bus resource [mem 0xfa000000-0xffffffff] [ 0.255414] pci_bus 0001:00: root bus resource [mem 0x80000000-0x8fffffff] [ 0.255424] pci_bus 0001:00: root bus resource [mem 0xb0000000-0xefffffff] [ 0.255434] pci_bus 0001:00: root bus resource [bus 00-ef] [ 0.255446] pci_bus 0001:00: busn_res: [bus 00-ef] end is updated to ff [ 0.255478] pci 0001:00:00.0: [106b:0074] type 00 class 0x060000 [ 0.255700] pci 0001:00:01.0: [1166:0130] type 01 class 0x060400 [ 0.255930] pci 0001:00:02.0: [1166:0130] type 01 class 0x060400 [ 0.256154] pci 0001:00:03.0: [1166:0132] type 01 class 0x060400 [ 0.256376] pci 0001:00:04.0: [1166:0132] type 01 class 0x060400 [ 0.256596] pci 0001:00:05.0: [1166:0132] type 01 class 0x060400 [ 0.256817] pci 0001:00:06.0: [1166:0132] type 01 class 0x060400 [ 0.257042] pci 0001:00:07.0: [106b:0053] type 01 class 0x060400 [ 0.257280] pci 0001:00:08.0: [106b:0054] type 01 class 0x060400 [ 0.257511] pci 0001:00:09.0: [106b:0055] type 01 class 0x060400 [ 0.257920] pci 0001:00:01.0: PCI bridge to [bus 04] [ 0.258072] pci 0001:05:04.0: [14e4:166a] type 00 class 0x020000 [ 0.258092] pci 0001:05:04.0: reg 0x10: [mem 0xfa530000-0xfa53ffff 64bit] [ 0.258105] pci 0001:05:04.0: reg 0x18: [mem 0xfa520000-0xfa52ffff 64bit] [ 0.258171] pci 0001:05:04.0: PME# supported from D3hot D3cold [ 0.258344] pci 0001:05:04.1: [14e4:166a] type 00 class 0x020000 [ 0.258365] pci 0001:05:04.1: reg 0x10: [mem 0xfa510000-0xfa51ffff 64bit] [ 0.258378] pci 0001:05:04.1: reg 0x18: [mem 0xfa500000-0xfa50ffff 64bit] [ 0.258444] pci 0001:05:04.1: PME# supported from D3hot D3cold [ 0.258627] pci 0001:00:02.0: PCI bridge to [bus 05] [ 0.258642] pci 0001:00:02.0: bridge window [mem 0xfa500000-0xfa5fffff] [ 0.258893] pci 0001:00:03.0: PCI bridge to [bus 06] [ 0.259043] pci 0001:00:04.0: PCI bridge to [bus 07] [ 0.259181] pci 0001:00:05.0: PCI bridge to [bus 08] [ 0.259315] pci 0001:00:06.0: PCI bridge to [bus 09] [ 0.259480] pci 0001:00:07.0: PCI bridge to [bus 02] [ 0.259496] pci 0001:00:07.0: bridge window [mem 0xfa000000-0xfa3fffff] [ 0.259503] pci 0001:00:07.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.259641] pci 0001:01:07.0: [106b:004f] type 00 class 0xff0000 [ 0.259655] pci 0001:01:07.0: reg 0x10: [mem 0x80000000-0x8007ffff] [ 0.259877] pci 0001:01:0b.0: [1033:0035] type 00 class 0x0c0310 [ 0.259895] pci 0001:01:0b.0: reg 0x10: [mem 0x80082000-0x80082fff] [ 0.259968] pci 0001:01:0b.0: supports D1 D2 [ 0.259972] pci 0001:01:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.260141] pci 0001:01:0b.1: [1033:0035] type 00 class 0x0c0310 [ 0.260159] pci 0001:01:0b.1: reg 0x10: [mem 0x80081000-0x80081fff] [ 0.260232] pci 0001:01:0b.1: supports D1 D2 [ 0.260235] pci 0001:01:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.260406] pci 0001:01:0b.2: [1033:00e0] type 00 class 0x0c0320 [ 0.260423] pci 0001:01:0b.2: reg 0x10: [mem 0x80080000-0x800800ff] [ 0.260497] pci 0001:01:0b.2: supports D1 D2 [ 0.260500] pci 0001:01:0b.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.260674] pci 0001:00:08.0: PCI bridge to [bus 01] [ 0.260691] pci 0001:00:08.0: bridge window [mem 0x80000000-0x800fffff] [ 0.260697] pci 0001:00:08.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.260938] pci 0001:03:0c.0: [1166:0240] type 00 class 0x01018f [ 0.260952] pci 0001:03:0c.0: reg 0x10: [io 0x811000-0x811007] [ 0.260962] pci 0001:03:0c.0: reg 0x14: [io 0x811000-0x811003] [ 0.260972] pci 0001:03:0c.0: reg 0x18: [io 0x811000-0x811007] [ 0.260982] pci 0001:03:0c.0: reg 0x1c: [io 0x811000-0x811003] [ 0.260992] pci 0001:03:0c.0: reg 0x20: [io 0x811000-0x81100f] [ 0.261002] pci 0001:03:0c.0: reg 0x24: [mem 0xfa402000-0xfa403fff] [ 0.261199] pci 0001:03:0d.0: [106b:0050] type 00 class 0xff0000 [ 0.261212] pci 0001:03:0d.0: reg 0x10: [mem 0xfa404000-0xfa407fff] [ 0.261422] pci 0001:03:0e.0: [106b:0052] type 00 class 0x0c0010 [ 0.261438] pci 0001:03:0e.0: reg 0x10: [mem 0xfa400000-0xfa400fff] [ 0.261507] pci 0001:03:0e.0: supports D1 D2 [ 0.261510] pci 0001:03:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.261678] pci 0001:00:09.0: PCI bridge to [bus 03] [ 0.261695] pci 0001:00:09.0: bridge window [mem 0xfa400000-0xfa4fffff] [ 0.261701] pci 0001:00:09.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.261920] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 09 [ 0.262137] PCI 0000:00 Cannot reserve Legacy IO [io 0x10000-0x10fff] [ 0.262157] pci 0000:00:0b.0: BAR 9: assigned [mem 0xf1000000-0xf10fffff 64bit pref] [ 0.262169] pci 0000:00:0b.0: PCI bridge to [bus 0a] [ 0.262179] pci 0000:00:0b.0: bridge window [io 0x10000-0x1ffff] [ 0.262191] pci 0000:00:0b.0: bridge window [mem 0x90000000-0xafffffff] [ 0.262203] pci 0000:00:0b.0: bridge window [mem 0xf1000000-0xf10fffff 64bit pref] [ 0.262217] pci_bus 0000:00: resource 4 [io 0x10000-0x80ffff] [ 0.262221] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff] [ 0.262224] pci_bus 0000:00: resource 6 [mem 0x90000000-0xafffffff] [ 0.262227] pci_bus 0000:0a: resource 0 [io 0x10000-0x1ffff] [ 0.262231] pci_bus 0000:0a: resource 1 [mem 0x90000000-0xafffffff] [ 0.262234] pci_bus 0000:0a: resource 2 [mem 0xf1000000-0xf10fffff 64bit pref] [ 0.262290] pci 0001:00:01.0: PCI bridge to [bus 04] [ 0.262305] pci 0001:00:02.0: PCI bridge to [bus 05] [ 0.262315] pci 0001:00:02.0: bridge window [mem 0xfa500000-0xfa5fffff] [ 0.262328] pci 0001:00:03.0: PCI bridge to [bus 06] [ 0.262342] pci 0001:00:04.0: PCI bridge to [bus 07] [ 0.262356] pci 0001:00:05.0: PCI bridge to [bus 08] [ 0.262384] pci 0001:00:06.0: PCI bridge to [bus 09] [ 0.262399] pci 0001:00:07.0: PCI bridge to [bus 02] [ 0.262409] pci 0001:00:07.0: bridge window [mem 0xfa000000-0xfa3fffff] [ 0.262423] pci 0001:00:08.0: PCI bridge to [bus 01] [ 0.262433] pci 0001:00:08.0: bridge window [mem 0x80000000-0x800fffff] [ 0.262447] pci 0001:00:09.0: PCI bridge to [bus 03] [ 0.262457] pci 0001:00:09.0: bridge window [mem 0xfa400000-0xfa4fffff] [ 0.262471] pci_bus 0001:00: resource 4 [io 0x811000-0xc10fff] [ 0.262474] pci_bus 0001:00: resource 5 [mem 0xfa000000-0xffffffff] [ 0.262478] pci_bus 0001:00: resource 6 [mem 0x80000000-0x8fffffff] [ 0.262481] pci_bus 0001:00: resource 7 [mem 0xb0000000-0xefffffff] [ 0.262484] pci_bus 0001:05: resource 1 [mem 0xfa500000-0xfa5fffff] [ 0.262488] pci_bus 0001:02: resource 1 [mem 0xfa000000-0xfa3fffff] [ 0.262491] pci_bus 0001:01: resource 1 [mem 0x80000000-0x800fffff] [ 0.262494] pci_bus 0001:03: resource 1 [mem 0xfa400000-0xfa4fffff] [ 0.262496] PCI: Probing PCI hardware done [ 0.270250] HugeTLB registered 16 MB page size, pre-allocated 0 pages [ 0.325638] raid6: altivecx1 gen() 3575 MB/s [ 0.382420] raid6: altivecx2 gen() 4916 MB/s [ 0.439197] raid6: altivecx4 gen() 5473 MB/s [ 0.495969] raid6: altivecx8 gen() 5048 MB/s [ 0.552761] raid6: int64x1 gen() 1460 MB/s [ 0.609544] raid6: int64x1 xor() 799 MB/s [ 0.666330] raid6: int64x2 gen() 1777 MB/s [ 0.723080] raid6: int64x2 xor() 1297 MB/s [ 0.779877] raid6: int64x4 gen() 2056 MB/s [ 0.836634] raid6: int64x4 xor() 1538 MB/s [ 0.893431] raid6: int64x8 gen() 2023 MB/s [ 0.950188] raid6: int64x8 xor() 1516 MB/s [ 0.950195] raid6: using algorithm altivecx4 gen() 5473 MB/s [ 0.950203] raid6: using intx1 recovery algorithm [ 0.950530] vgaarb: device added: PCI:0000:0a:00.0,decodes=io+mem,owns=none,locks=none [ 0.950583] vgaarb: loaded [ 0.950589] vgaarb: bridge control possible 0000:0a:00.0 [ 0.950747] SCSI subsystem initialized [ 0.950915] libata version 3.00 loaded. [ 0.950964] EDAC MC: Ver: 3.0.0 [ 0.952119] clocksource: Switched to clocksource timebase [ 0.960414] NET: Registered protocol family 2 [ 0.961119] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.962411] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) [ 0.969480] TCP: Hash tables configured (established 131072 bind 65536) [ 0.969749] UDP hash table entries: 8192 (order: 8, 1310720 bytes) [ 0.972019] UDP-Lite hash table entries: 8192 (order: 8, 1310720 bytes) [ 0.974461] NET: Registered protocol family 1 [ 0.974518] PCI: CLS mismatch (32 != 64), using 128 bytes [ 0.974544] pci 0001:00:03.0: Found enabled HT MSI Mapping [ 0.974562] pci 0001:00:04.0: Found enabled HT MSI Mapping [ 0.974579] pci 0001:00:05.0: Found enabled HT MSI Mapping [ 0.974597] pci 0001:00:06.0: Found enabled HT MSI Mapping [ 0.974644] pci 0001:01:0b.0: enabling device (0000 -> 0002) [ 1.028888] pci 0001:01:0b.1: enabling device (0000 -> 0002) [ 1.085469] pci 0001:01:0b.2: enabling device (0004 -> 0006) [ 1.087074] Initialise system trusted keyrings [ 1.087500] workingset: timestamp_bits=38 max_order=22 bucket_order=0 [ 2.049803] NET: Registered protocol family 38 [ 2.049851] Key type asymmetric registered [ 2.049866] Asymmetric key parser 'x509' registered [ 2.050084] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.050242] io scheduler noop registered [ 2.050250] io scheduler deadline registered (default) [ 2.050569] io scheduler bfq registered [ 2.050576] BFQ I/O-scheduler: v8r7 [ 2.051543] Using unsupported 1920x1080 NVDA,Display-A at 90020000, depth=8, pitch=2048 [ 2.091090] Console: switching to colour frame buffer device 240x67 [ 2.129665] fb0: Open Firmware frame buffer device on /pci@0,f0000000/NVDA,Parent@0/NVDA,Display-A@0 [ 2.130218] MacIO PCI driver attached to Shasta chipset [ 2.133017] sata_svw 0001:03:0c.0: version 2.3 [ 2.133101] sata_svw 0001:03:0c.0: Using 32-bit DMA via iommu [ 2.135601] scsi host0: sata_svw [ 2.136200] scsi host1: sata_svw [ 2.136661] scsi host2: sata_svw [ 2.137110] scsi host3: sata_svw [ 2.137396] ata1: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402000 irq 18 [ 2.137573] ata2: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402100 irq 18 [ 2.137748] ata3: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402200 irq 18 [ 2.137924] ata4: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402300 irq 18 [ 2.138261] pata-pci-macio 0001:03:0d.0: enabling device (0004 -> 0006) [ 2.152135] pata-pci-macio 0001:03:0d.0: Activating pata-macio chipset Shasta ATA-6, Apple bus ID 3 [ 2.153322] scsi host4: pata_macio [ 2.153612] ata5: PATA max UDMA/133 irq 38 [ 2.205061] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 2.205251] i2c /dev entries driver [ 2.205769] PowerMac i2c bus smu 14 registered [ 2.206130] PowerMac i2c bus smu 11 registered [ 2.206684] PowerMac i2c bus mac-io 0 registered [ 2.207137] PowerMac i2c bus mac-io 0 registered [ 2.207688] PowerMac i2c bus u4 1 registered [ 2.222134] pmac64_cpufreq: Registering G5 CPU frequency driver [ 2.222266] pmac64_cpufreq: Frequency method: SCOM, Voltage method: GPIO [ 2.222420] pmac64_cpufreq: Low: 1150 Mhz, High: 2300 Mhz, Cur: 2300 MHz [ 2.223672] NET: Registered protocol family 10 [ 2.224560] NET: Registered protocol family 17 [ 2.225328] registered taskstats version 1 [ 2.225413] Loading compiled-in X.509 certificates [ 2.227488] Btrfs loaded, crc32c=crc32c-generic [ 2.229336] OF: Duplicate name in testcase-data, renamed to "duplicate-name#1" [ 2.233213] ### dt-test ### start of unittest - you will see error messages [ 2.234175] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1 [ 2.234487] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1 [ 2.234802] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle [ 2.234979] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle [ 2.235157] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property [ 2.235354] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property [ 2.236569] irq: no irq domain found for /testcase-data/interrupts/intc0 ! [ 2.241818] OF: overlay: overlay_is_topmost: #5 clashes #6 @/testcase-data/overlay-node/test-bus/test-unittest8 [ 2.242072] OF: overlay: overlay #5 is not topmost [ 2.248821] ### dt-test ### end of unittest - 148 passed, 0 failed [ 2.318561] ata5.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 2.00, max UDMA/66 [ 2.335289] ata5.00: configured for UDMA/66 [ 2.452515] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.467229] ata1.00: HPA detected: current 1250261615, native 1250263728 [ 2.473843] ata1.00: ATA-8: WDC WD6400AAKS-22A7B0, 01.03B01, max UDMA/133 [ 2.480450] ata1.00: 1250261615 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.490264] ata1.00: configured for UDMA/133 [ 2.497670] scsi 0:0:0:0: Direct-Access ATA WDC WD6400AAKS-2 3B01 PQ: 0 ANSI: 5 [ 2.540749] sd 0:0:0:0: [sda] 1250261615 512-byte logical blocks: (640 GB/596 GiB) [ 2.554032] sd 0:0:0:0: [sda] Write Protect is off [ 2.561047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.561137] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.581428] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 [ 2.596497] random: fast init done [ 2.604868] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.883673] ata2: SATA link down (SStatus 4 SControl 300) [ 3.928836] ata3: failed to resume link (SControl 0) [ 3.941703] ata3: SATA link down (SStatus 0 SControl 0) [ 4.988836] ata4: failed to resume link (SControl 0) [ 5.001587] ata4: SATA link down (SStatus 0 SControl 0) [ 5.016155] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 2.00 PQ: 0 ANSI: 5 [ 5.023487] ata5.00: K2/Shasta alignment limits applied [ 5.061034] EXT4-fs (sda8): couldn't mount as ext3 due to feature incompatibilities [ 5.074732] EXT4-fs (sda8): couldn't mount as ext2 due to feature incompatibilities [ 5.129589] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 5.142491] VFS: Mounted root (ext4 filesystem) readonly on device 8:8. [ 5.149955] Freeing unused kernel memory: 384K [ 5.156958] This architecture does not have kernel memory protection. [ 6.195721] cgroup: cgroup2: unknown option "nsdelegate" [ 6.272313] systemd[1]: systemd 241 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 6.288006] systemd[1]: Detected architecture ppc64. [ 6.358339] systemd[1]: Set hostname to . [ 8.040855] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 8.056598] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 8.346638] random: crng init done [ 8.478953] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.501033] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 8.519890] systemd[1]: Listening on udev Control Socket. [ 8.538699] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 8.557850] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 9.361740] IBM CPC925 EDAC driver Ver: 1.0.0 [ 9.371341] (c) 2008 Wind River Systems, Inc [ 9.402903] zram: Added device: zram0 [ 9.412938] zram: Added device: zram1 [ 9.440959] zram: Added device: zram2 [ 9.984143] zram1: detected capacity change from 0 to 17179869184 [ 11.154573] EXT4-fs (zram1): mounting ext2 file system using the ext4 subsystem [ 11.174624] EXT4-fs (zram1): mounted filesystem without journal. Opts: (null) [ 11.469562] EXT4-fs (sda8): re-mounted. Opts: (null) [ 11.825979] systemd-journald[95]: Received request to flush runtime journal from PID 1 [ 13.367600] Linux agpgart interface v0.103 [ 13.581432] firewire_ohci 0001:03:0e.0: enabling device (0000 -> 0002) [ 13.619488] snd-aoa-codec-onyx: created and attached onyx instance [ 13.620089] snd-aoa-codec-onyx: created and attached onyx instance [ 13.645878] firewire_ohci 0001:03:0e.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 13.809055] pps_core: LinuxPPS API ver. 1 registered [ 13.816970] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 14.166579] firewire_core 0001:03:0e.0: created device fw0: GUID 001451fffe26fa7e, S800 [ 14.176677] firewire_core 0001:03:0e.0: phy config: new root=ffc1, gap_count=5 [ 14.488913] BTRFS: device label ppc64_g5 devid 1 transid 52007 /dev/sda7 [ 14.702060] PTP clock support registered [ 14.827924] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 14.835701] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 14.846507] Adding 16781308k swap on /dev/sda5. Priority:-1 extents:1 across:16781308k [ 14.878282] windfarm: initializing for dual-core desktop G5 [ 14.891786] usbcore: registered new interface driver usbfs [ 14.904731] usbcore: registered new interface driver hub [ 14.913093] usbcore: registered new device driver usb [ 14.915233] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 15.117430] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 15.142863] ehci-pci: EHCI PCI platform driver [ 15.151802] ehci-pci 0001:01:0b.2: EHCI Host Controller [ 15.151967] ehci-pci 0001:01:0b.2: new USB bus registered, assigned bus number 1 [ 15.152346] ehci-pci 0001:01:0b.2: irq 70, io mem 0x80080000 [ 15.172163] ehci-pci 0001:01:0b.2: USB 2.0 started, EHCI 1.00 [ 15.172943] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 15.172945] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.172948] usb usb1: Product: EHCI Host Controller [ 15.172950] usb usb1: Manufacturer: Linux 4.9.184-gentoo ehci_hcd [ 15.172953] usb usb1: SerialNumber: 0001:01:0b.2 [ 15.181025] hub 1-0:1.0: USB hub found [ 15.181359] hub 1-0:1.0: 5 ports detected [ 15.257855] snd-aoa-fabric-layout: Using PMF GPIOs [ 15.259570] snd-aoa-fabric-layout: can use this codec [ 15.286199] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 15.312463] snd-aoa-codec-onyx: attached to onyx codec via i2c [ 15.328887] windfarm: CPUs control loops started. [ 15.341769] snd-aoa-fabric-layout: platform-onyx-codec-ref doesn't match! [ 15.349854] snd-aoa: fabric didn't like codec onyx [ 15.373397] ohci-pci: OHCI PCI platform driver [ 15.373525] ohci-pci 0001:01:0b.0: OHCI PCI host controller [ 15.373560] ohci-pci 0001:01:0b.0: new USB bus registered, assigned bus number 2 [ 15.373719] ohci-pci 0001:01:0b.0: irq 70, io mem 0x80082000 [ 15.407834] EXT4-fs (sda6): mounting ext2 file system using the ext4 subsystem [ 15.418239] [drm] Initialized [ 15.436280] EXT4-fs (sda6): mounted filesystem without journal. Opts: (null) [ 15.461112] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 15.461115] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.461118] usb usb2: Product: OHCI PCI host controller [ 15.461120] usb usb2: Manufacturer: Linux 4.9.184-gentoo ohci_hcd [ 15.461122] usb usb2: SerialNumber: 0001:01:0b.0 [ 15.472602] hub 2-0:1.0: USB hub found [ 15.472661] hub 2-0:1.0: 3 ports detected [ 15.473563] ohci-pci 0001:01:0b.1: OHCI PCI host controller [ 15.473588] ohci-pci 0001:01:0b.1: new USB bus registered, assigned bus number 3 [ 15.473699] ohci-pci 0001:01:0b.1: irq 70, io mem 0x80081000 [ 15.519946] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 15.548636] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 15.548640] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.548642] usb usb3: Product: OHCI PCI host controller [ 15.548645] usb usb3: Manufacturer: Linux 4.9.184-gentoo ohci_hcd [ 15.548647] usb usb3: SerialNumber: 0001:01:0b.1 [ 15.549767] hub 3-0:1.0: USB hub found [ 15.549814] hub 3-0:1.0: 2 ports detected [ 15.639918] tg3.c:v3.137 (May 11, 2014) [ 15.670042] usb 1-3: New USB device found, idVendor=1a40, idProduct=0101 [ 15.670045] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 15.670048] usb 1-3: Product: USB 2.0 Hub [ 15.671398] hub 1-3:1.0: USB hub found [ 15.671521] hub 1-3:1.0: 4 ports detected [ 15.684128] tg3 0001:05:04.0: Using 32-bit DMA via iommu [ 15.687677] tg3 0001:05:04.0 eth0: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:14:51:65:25:d6 [ 15.687681] tg3 0001:05:04.0 eth0: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 15.687684] tg3 0001:05:04.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 15.687688] tg3 0001:05:04.0 eth0: dma_rwctrl[76144000] dma_mask[40-bit] [ 15.709897] tg3 0001:05:04.1: Using 32-bit DMA via iommu [ 15.712387] tg3 0001:05:04.1 eth1: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:14:51:65:25:d7 [ 15.712391] tg3 0001:05:04.1 eth1: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 15.712394] tg3 0001:05:04.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 15.712397] tg3 0001:05:04.1 eth1: dma_rwctrl[76144000] dma_mask[40-bit] [ 15.857534] tg3 0001:05:04.1 enP1p5s4f1: renamed from eth1 [ 15.884454] tg3 0001:05:04.0 enP1p5s4f0: renamed from eth0 [ 15.975558] usb 1-3.3: new low-speed USB device number 3 using ehci-pci [ 16.115562] usb 1-3.3: New USB device found, idVendor=046a, idProduct=010d [ 16.124053] usb 1-3.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 16.165966] sat 0 partition c8: [ 16.165970] c8 [ 16.173586] 6 [ 16.173598] 2 [ 16.181082] 7f [ 16.181097] ff [ 16.188519] 2 [ 16.188532] ff [ 16.195872] 1 [ 16.195885] fb [ 16.203151] bf [ 16.203166] 0 [ 16.210396] 41 [ 16.210411] 0 [ 16.217557] 20 [ 16.217571] 0 [ 16.224622] 0 [ 16.224634] 0 [ 16.231535] 7 [ 16.231548] 89 [ 16.238356] 37 [ 16.238371] 0 [ 16.238833] usb 1-3.4: new full-speed USB device number 4 using ehci-pci [ 16.251865] a0 [ 16.251880] 0 [ 16.258582] 0 [ 16.358875] usb 1-3.4: New USB device found, idVendor=1e7d, idProduct=2c38 [ 16.365616] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 16.372321] usb 1-3.4: Product: ROCCAT Kiro Mouse [ 16.378928] usb 1-3.4: Manufacturer: ROCCAT [ 16.413616] hidraw: raw HID events driver (C) Jiri Kosina [ 16.637610] checking generic (90020000 21c000) vs hw (90000000 10000000) [ 16.637615] fb: switching to nouveaufb from OFfb NVDA,Displ [ 16.662589] Console: switching to colour dummy device 80x25 [ 16.670227] nouveau 0000:0a:00.0: NVIDIA NV43 (043100a4) [ 16.691481] nouveau 0000:0a:00.0: bios: version 05.43.02.75.00 [ 16.718914] usbcore: registered new interface driver usbhid [ 16.718929] usbhid: USB HID core driver [ 16.755732] input: HID 046a:010d as /devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-3/1-3.3/1-3.3:1.0/0003:046A:010D.0001/input/input0 [ 16.761152] nouveau 0000:0a:00.0: fb: 256 MiB DDR1 [ 16.813795] hid-generic 0003:046A:010D.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:010d] on usb-0001:01:0b.2-3.3/input0 [ 16.817639] input: HID 046a:010d as /devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-3/1-3.3/1-3.3:1.1/0003:046A:010D.0002/input/input1 [ 16.886650] sat 0 partition c4: [ 16.886654] c4 [ 16.886665] 4 [ 16.886667] 1 [ 16.886673] 7f [ 16.886675] 22 [ 16.886681] 11 [ 16.886683] e0 [ 16.886689] e6 [ 16.886691] ff [ 16.886696] 55 [ 16.886699] 7b [ 16.886704] 12 [ 16.886707] ec [ 16.886712] 11 [ 16.886714] 0 [ 16.886720] 0 [ 16.905931] nouveau 0000:0a:00.0: Using 32-bit DMA via iommu [ 16.906590] hid-generic 0003:046A:010D.0002: input,hidraw1: USB HID v1.11 Device [HID 046a:010d] on usb-0001:01:0b.2-3.3/input1 [ 16.907581] input: ROCCAT ROCCAT Kiro Mouse as /devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-3/1-3.4/1-3.4:1.0/0003:1E7D:2C38.0003/input/input2 [ 16.915715] [TTM] Zone kernel: Available graphics memory: 8105692 kiB [ 16.915729] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 16.915742] [TTM] Initializing pool allocator [ 16.915786] [TTM] Initializing DMA pool allocator [ 16.916014] nouveau 0000:0a:00.0: DRM: VRAM: 252 MiB [ 16.916022] nouveau 0000:0a:00.0: DRM: GART: 512 MiB [ 16.916055] nouveau 0000:0a:00.0: DRM: TMDS table version 1.1 [ 16.916065] nouveau 0000:0a:00.0: DRM: DCB version 3.0 [ 16.916075] nouveau 0000:0a:00.0: DRM: DCB outp 00: 01000100 00000028 [ 16.916085] nouveau 0000:0a:00.0: DRM: DCB outp 01: 03000102 00000000 [ 16.916094] nouveau 0000:0a:00.0: DRM: DCB outp 02: 04011210 00000028 [ 16.916104] nouveau 0000:0a:00.0: DRM: DCB outp 03: 02111212 02000100 [ 16.916113] nouveau 0000:0a:00.0: DRM: DCB outp 04: 02011211 0020c070 [ 16.916123] nouveau 0000:0a:00.0: DRM: DCB conn 00: 1030 [ 16.916132] nouveau 0000:0a:00.0: DRM: DCB conn 01: 2130 [ 16.949398] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 16.949412] [drm] Driver supports precise vblank timestamp query. [ 16.967842] hid-generic 0003:1E7D:2C38.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [ROCCAT ROCCAT Kiro Mouse] on usb-0001:01:0b.2-3.4/input0 [ 16.976724] input: ROCCAT ROCCAT Kiro Mouse as /devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-3/1-3.4/1-3.4:1.1/0003:1E7D:2C38.0004/input/input3 [ 16.980130] nouveau 0000:0a:00.0: DRM: MM: using M2MF for buffer copies [ 16.980207] nouveau 0000:0a:00.0: DRM: Setting dpms mode 3 on TV encoder (output 4) [ 17.128854] hid-generic 0003:1E7D:2C38.0004: input,hidraw3: USB HID v1.00 Keyboard [ROCCAT ROCCAT Kiro Mouse] on usb-0001:01:0b.2-3.4/input1 [ 17.187333] nouveau 0000:0a:00.0: DRM: allocated 1920x1080 fb: 0x9000, bo c000000459a00000 [ 17.218194] nouveau 0000:0a:00.0: DRM: 0x14C5: Parsing digital output script table [ 17.369012] Console: switching to colour frame buffer device 240x67 [ 17.371271] nouveau 0000:0a:00.0: fb0: nouveaufb frame buffer device [ 17.375930] [drm] Initialized nouveau 1.3.1 20120801 for 0000:0a:00.0 on minor 0 [ 17.743251] sat 0 partition c9: [ 17.743256] c9 [ 17.743276] 6 [ 17.743281] 2 [ 17.743289] 7f [ 17.743294] ff [ 17.743302] 2 [ 17.743307] ff [ 17.743315] 1 [ 17.743320] fb [ 17.743328] bf [ 17.743333] 0 [ 17.743341] 41 [ 17.743346] 0 [ 17.743354] 20 [ 17.743359] 0 [ 17.743367] 0 [ 17.743372] 0 [ 17.743380] 7 [ 17.743385] 89 [ 17.743393] 37 [ 17.743398] 0 [ 17.743405] a0 [ 17.743411] 0 [ 17.743418] 0 [ 18.366420] sat 0 partition c5: [ 18.366428] c5 [ 18.366461] 4 [ 18.366471] 1 [ 18.366487] 7f [ 18.366497] 22 [ 18.366512] 11 [ 18.366523] e0 [ 18.366538] e6 [ 18.366548] ff [ 18.366563] 55 [ 18.366573] 7b [ 18.366588] 12 [ 18.366599] ec [ 18.366614] 11 [ 18.366624] 0 [ 18.366639] 0 [ 18.745958] windfarm: Backside control loop started. [ 18.796479] windfarm: Slots control loop started. [ 18.897525] windfarm: Drive bay control loop started. [ 20.715272] IPv6: ADDRCONF(NETDEV_UP): enP1p5s4f0: link is not ready [ 20.717249] u3msi: allocated virq 0x20 (hw 0x8) addr 0xfee00000 [ 20.764838] IPv6: ADDRCONF(NETDEV_UP): enP1p5s4f0: link is not ready [ 20.797273] IPv6: ADDRCONF(NETDEV_UP): enP1p5s4f1: link is not ready [ 20.797877] u3msi: allocated virq 0x21 (hw 0x9) addr 0xfee00000 [ 20.846801] IPv6: ADDRCONF(NETDEV_UP): enP1p5s4f1: link is not ready [ 24.667234] tg3 0001:05:04.0 enP1p5s4f0: Link is up at 1000 Mbps, full duplex [ 24.667466] tg3 0001:05:04.0 enP1p5s4f0: Flow control is on for TX and on for RX [ 24.667857] IPv6: ADDRCONF(NETDEV_CHANGE): enP1p5s4f0: link becomes ready