Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.36-rc1 (root@rimmer) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #4 SMP PREEMPT Sun Aug 22 18:22:40 CEST 2010 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! DMI 2.4 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. last_pfn = 0x7fee0 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 found SMP MP-table at [c00f5920] f5920 init_memory_mapping: 0000000000000000-00000000377fe000 ACPI: RSDP 000f76c0 00024 (v02 Nvidia) ACPI: XSDT 7fee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: FACP 7feec440 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: DSDT 7fee3280 0917B (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000) ACPI: FACS 7fee0000 00040 ACPI: SSDT 7feec640 00248 (v01 PTLTD POWERNOW 00000001 LTP 00000001) ACPI: HPET 7feec900 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098) ACPI: MCFG 7feec980 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: APIC 7feec580 0007C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) 1158MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0007fee0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0007fee0 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10de8201 base: 0xfefff000 SMP: Allowing 2 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:70100000) setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 13 pages/cpu @c2400000 s30016 r0 d23232 u2097152 pcpu-alloc: s30016 r0 d23232 u2097152 alloc=1*4194304 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519793 Kernel command line: root=/dev/sde3 console=ttyS0,115200 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Subtract (75 early reservations) #1 [0000001000 - 0000002000] EX TRAMPOLINE #2 [0000200000 - 0000910a84] TEXT DATA BSS #3 [0000911000 - 0000914145] BRK #4 [00000f5930 - 0000100000] BIOS reserved #5 [00000f5920 - 00000f5930] MP-table mpf #6 [000009f000 - 00000f1400] BIOS reserved #7 [00000f153c - 00000f5920] BIOS reserved #8 [00000f1400 - 00000f153c] MP-table mpc #9 [0000010000 - 0000011000] TRAMPOLINE #10 [0000011000 - 0000015000] ACPI WAKEUP #11 [0000015000 - 0000016000] PGTABLE #12 [0001000000 - 0001001000] BOOTMEM #13 [0001001100 - 0001001200] BOOTMEM #14 [0001002000 - 0001082000] BOOTMEM #15 [0001082000 - 0001102000] BOOTMEM #16 [0001102000 - 0001182000] BOOTMEM #17 [0001182000 - 0001202000] BOOTMEM #18 [0001202000 - 0001282000] BOOTMEM #19 [0001282000 - 0001302000] BOOTMEM #20 [0001302000 - 0001382000] BOOTMEM #21 [0001382000 - 0001402000] BOOTMEM #22 [0001402000 - 0001482000] BOOTMEM #23 [0001482000 - 0001502000] BOOTMEM #24 [0001502000 - 0001582000] BOOTMEM #25 [0001582000 - 0001602000] BOOTMEM #26 [0001602000 - 0001682000] BOOTMEM #27 [0001682000 - 0001702000] BOOTMEM #28 [0001702000 - 0001782000] BOOTMEM #29 [0001782000 - 0001802000] BOOTMEM #30 [0001802000 - 0001882000] BOOTMEM #31 [0001882000 - 0001902000] BOOTMEM #32 [0001902000 - 0001982000] BOOTMEM #33 [0001982000 - 0001a02000] BOOTMEM #34 [0001a02000 - 0001a82000] BOOTMEM #35 [0001a82000 - 0001b02000] BOOTMEM #36 [0001b02000 - 0001b82000] BOOTMEM #37 [0001b82000 - 0001c02000] BOOTMEM #38 [0001c02000 - 0001c82000] BOOTMEM #39 [0001c82000 - 0001d02000] BOOTMEM #40 [0001d02000 - 0001d82000] BOOTMEM #41 [0001d82000 - 0001e02000] BOOTMEM #42 [0001e02000 - 0001e82000] BOOTMEM #43 [0001e82000 - 0001f02000] BOOTMEM #44 [0001f02000 - 0001f82000] BOOTMEM #45 [0001f82000 - 0002002000] BOOTMEM #46 [0001001000 - 00010010c0] BOOTMEM #47 [0002002000 - 0002005000] BOOTMEM #48 [0002005000 - 000200b000] BOOTMEM #49 [00010010c0 - 00010010e5] BOOTMEM #50 [0001001200 - 0001001227] BOOTMEM #51 [0001001240 - 0001001358] BOOTMEM #52 [0001001380 - 00010013c0] BOOTMEM #53 [00010013c0 - 0001001400] BOOTMEM #54 [0001001400 - 0001001440] BOOTMEM #55 [0001001440 - 0001001480] BOOTMEM #56 [0001001480 - 00010014c0] BOOTMEM #57 [00010014c0 - 0001001500] BOOTMEM #58 [0001001500 - 0001001540] BOOTMEM #59 [0001001540 - 0001001580] BOOTMEM #60 [0001001580 - 00010015c0] BOOTMEM #61 [00010015c0 - 00010015d0] BOOTMEM #62 [0001001600 - 0001001624] BOOTMEM #63 [0001001640 - 0001001664] BOOTMEM #64 [0002400000 - 000240d000] BOOTMEM #65 [0002600000 - 000260d000] BOOTMEM #66 [0001001680 - 0001001684] BOOTMEM #67 [00010016c0 - 00010016c4] BOOTMEM #68 [0001001700 - 0001001708] BOOTMEM #69 [0001001740 - 0001001748] BOOTMEM #70 [0001001780 - 0001001828] BOOTMEM #71 [0001001840 - 00010018a8] BOOTMEM #72 [000200b000 - 000200f000] BOOTMEM #73 [000200f000 - 000208f000] BOOTMEM #74 [000208f000 - 00020cf000] BOOTMEM Initializing HighMem for node 0 (000377fe:0007fee0) Memory: 2070956k/2096000k available (4458k kernel code, 24592k reserved, 1996k data, 400k init, 1186696k highmem) virtual kernel memory layout: fixmap : 0xfff67000 - 0xfffff000 ( 608 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc084e000 - 0xc08b2000 ( 400 kB) .data : 0xc065a91e - 0xc084d920 (1996 kB) .text : 0xc0200000 - 0xc065a91e (4458 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU debugfs-based tracing is enabled. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:384 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [ttyS0] enabled Fast TSC calibration using PIT Detected 2310.269 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4620.53 BogoMIPS (lpj=2310269) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20100702 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 01 Booting Node 0, Processors #1 Ok. Initializing CPU#1 Brought up 2 CPUs Total of 2 processors activated (9241.59 BogoMIPS). Time: 21:53:51 Date: 08/24/10 NET: Registered protocol family 16 TOM: 0000000080000000 aka 2048M ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-02]) pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode) pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:0f.0: PCI bridge to [bus 02-02] Unable to assume PCIe control: Disabling ASPM ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.23. PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 hpet0: 3 comparators, 32-bit 25.000000 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:01: [io 0x1000-0x107f] has been reserved system 00:01: [io 0x1080-0x10ff] has been reserved system 00:01: [io 0x1400-0x147f] has been reserved system 00:01: [io 0x1480-0x14ff] has been reserved system 00:01: [io 0x1800-0x187f] has been reserved system 00:01: [io 0x1880-0x18ff] has been reserved system 00:02: [io 0x04d0-0x04d1] has been reserved system 00:02: [io 0x0800-0x087f] has been reserved system 00:02: [io 0x0290-0x0297] has been reserved system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved system 00:0d: [mem 0x000cee00-0x000cffff] has been reserved system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved system 00:0d: [mem 0xfefff000-0xfefff0ff] has been reserved system 00:0d: [mem 0x7fee0000-0x7fefffff] could not be reserved system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0d: [mem 0x00100000-0x7fedffff] could not be reserved system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved system 00:0d: [mem 0xfefff000-0xfeffffff] could not be reserved system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved pci 0000:00:06.0: PCI bridge to [bus 01-01] pci 0000:00:06.0: bridge window [io disabled] pci 0000:00:06.0: bridge window [mem disabled] pci 0000:00:06.0: bridge window [mem pref disabled] pci 0000:00:0f.0: PCI bridge to [bus 02-02] pci 0000:00:0f.0: bridge window [io disabled] pci 0000:00:0f.0: bridge window [mem 0xfa000000-0xfcffffff] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:05.0: Enabling HT MSI Mapping pci 0000:00:05.1: Enabling HT MSI Mapping pci 0000:00:05.2: Enabling HT MSI Mapping pci 0000:00:06.0: Enabling HT MSI Mapping pci 0000:00:06.1: Enabling HT MSI Mapping pci 0000:00:08.0: Enabling HT MSI Mapping pci 0000:00:0f.0: Enabling HT MSI Mapping microcode: microcode: CPU0: AMD CPU family 0xf not supported microcode: microcode: CPU1: AMD CPU family 0xf not supported microcode: Microcode Update Driver: v2.00 , Peter Oruba audit: initializing netlink socket (disabled) type=2000 audit(1282686830.809:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) fuse init (API version 7.15) msgmni has been set to 1727 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for fcrypt (fcrypt-generic) alg: No test for stdrng (krng) alg: No test for fips(ansi_cprng) (fips_ansi_cprng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (40 C) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded Loading iSCSI transport class v2.0-870. ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 sata_nv 0000:00:05.0: Using SWNCQ mode scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 sata_nv 0000:00:05.1: Using SWNCQ mode scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 22 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 22 ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 sata_nv 0000:00:05.2: Using SWNCQ mode scsi4 : sata_nv scsi5 : sata_nv ata5: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 21 ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 21 scsi6 : pata_amd scsi7 : pata_amd ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20 ata7.00: ATA-7: ST3250820A, 3.AAE, max UDMA/100 ata7.00: 488397168 sectors, multi 1: LBA48 ata7.00: configured for UDMA/100 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATAPI: ASUS DRW-1814BLT, 1.10, max UDMA/66 ata1.00: configured for UDMA/66 scsi 0:0:0:0: CD-ROM ASUS DRW-1814BLT 1.10 PQ: 0 ANSI: 5 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi generic sg0 type 5 ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-7: MAXTOR STM3500630AS, 3.AAE, max UDMA/133 ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32) ata5.00: ATA-7: MAXTOR STM3500630AS, 3.AAE, max UDMA/133 ata5.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1d:60:06:c0:47 forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky console [netcon0] enabled ata5.00: configured for UDMA/133 netconsole: network logging started ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.36-rc1 ehci_hcd usb usb1: SerialNumber: 0000:00:02.1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.36-rc1 ohci_hcd usb usb2: SerialNumber: 0000:00:02.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected uhci_hcd: USB Universal Host Controller Interface driver usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com cpuidle: using governor ladder input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 cpuidle: using governor menu No iBFT detected. usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21 hda_intel: msi for device 1043:81f6 set to 0 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-7: MAXTOR STM3500630AS, 3.AAE, max UDMA/133 ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA MAXTOR STM350063 3.AA PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 1:0:0:0: Attached scsi generic sg1 type 0 scsi 2:0:0:0: Direct-Access ATA MAXTOR STM350063 3.AA PQ: 0 ANSI: 5 sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: Attached scsi generic sg2 type 0 sdb: unknown partition table psmouse.c: Failed to reset mouse on isa0060/serio1 sd 2:0:0:0: [sdb] Attached SCSI disk sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 1:0:0:0: [sda] Attached SCSI disk ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. ata4.00: ATA-7: MAXTOR STM3500630AS, 3.AAE, max UDMA/133 ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32) ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA MAXTOR STM350063 3.AA PQ: 0 ANSI: 5 sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 3:0:0:0: Attached scsi generic sg3 type 0 scsi 4:0:0:0: Direct-Access ATA MAXTOR STM350063 3.AA PQ: 0 ANSI: 5 sd 4:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 4:0:0:0: [sdd] Write Protect is off sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: Attached scsi generic sg4 type 0 sdd: unknown partition table sd 3:0:0:0: [sdc] Write Protect is off sd 4:0:0:0: [sdd] Attached SCSI disk sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: unknown partition table sd 3:0:0:0: [sdc] Attached SCSI disk atkbd serio0: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0). atkbd serio0: Use 'setkeycodes 00 ' to make it known. atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. ALSA device list: #0: HDA NVidia at 0xfe024000 irq 21 oprofile: using NMI interrupt. Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Registering the dns_resolver key type Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 6:384:905 ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata6.00: ATA-6: ST3120026AS, 3.18, max UDMA/133 ata6.00: 234441648 sectors, multi 1: LBA48 ata6.00: configured for UDMA/133 scsi 5:0:0:0: Direct-Access ATA ST3120026AS 3.18 PQ: 0 ANSI: 5 sd 5:0:0:0: [sde] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 5:0:0:0: Attached scsi generic sg5 type 0 scsi 6:0:0:0: Direct-Access ATA ST3250820A 3.AA PQ: 0 ANSI: 5 sd 6:0:0:0: [sdf] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 6:0:0:0: [sdf] Write Protect is off sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 6:0:0:0: Attached scsi generic sg6 type 0 sd 5:0:0:0: [sde] Write Protect is off sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdf: sdf1 sdf2 sdf3 sd 6:0:0:0: [sdf] Attached SCSI disk sde: sde1 sde2 sde3 sd 5:0:0:0: [sde] Attached SCSI disk input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1 md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. REISERFS (device sde3): found reiserfs format "3.6" with standard journal REISERFS (device sde3): using ordered data mode REISERFS (device sde3): journal params: device sde3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sde3): checking transaction log (sde3) REISERFS (device sde3): Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly on device 8:67. Freeing unused kernel memory: 400k freed INIT: version 2.87 booting Gentoo Linux; http://www.gentoo.org/ Copyright 1999-2009 Gentoo Foundation; Distributed under the GPLv2 Press I to enter interactive boot mode * Mounting proc at /proc ... [ ok ] * Mounting sysfs at /sys ... [ ok ] * Mounting /dev ... [ ok ] * Starting udevd ... [ ok ] * Populating /dev with existing devices through uevents ... [ ok ] * Waiting for uevents to be processed ...udevd-work[1082]: device node '/dev/mapper/control' already exists, link to '/dev/mapper/control' will not overwrite it [ ok ] * Mounting devpts at /dev/pts ... [ ok ] * Checking root filesystem ...Reiserfs super block in block 16 on 0x843 of format 3.6 with standard journal Blocks (total/free): 28284432/1362795 by 4096 bytes Filesystem is clean Filesystem seems mounted read-only. Skipping journal replay. Checking internal tree..finished [ ok ] * Remounting root filesystem read/write ... [ ok ] * Starting up RAID devices ... [ ok ] * Setting up the Logical Volume Manager ..istý, 52/10040 souborů, 33800/40128 bloků /dev/mapper/lvm--raid-lvm0 byl pÅipojen 41krát bez kontroly, kontrola vynucena. /dev/mapper/lvm-------------[ cut here ]------------ kernel BUG at drivers/scsi/scsi_lib.c:1113! invalid opcode: 0000 [#1] PREEMPT SMP last sysfs file: /sys/devices/pci0000:00/0000:00:05.2/host5/target5:0:0/5:0:0:0/block/sde/uevent Modules linked in: raid1 nvidia(P) k8temp asus_atk0110 hwmon i2c_nforce2 Pid: 1451, comm: md0_raid1 Tainted: P 2.6.36-rc1 #4 M2N-E/System Product Name EIP: 0060:[] EFLAGS: 00010046 CPU: 0 EIP is at scsi_setup_fs_cmnd+0x3e/0x93 EAX: 00000000 EBX: f6913a00 ECX: 00000002 EDX: f20398f0 ESI: f71a2c00 EDI: f20398f0 EBP: f6459d9c ESP: f6459d8c DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process md0_raid1 (pid: 1451, ti=f6458000 task=f67b1c70 task.ti=f6458000) Stack: f5cba558 f6913a00 f6908a70 00000000 f6459e00 c04968de f6908fa8 f65b4380 <0> f6459de4 f6459de4 c03feeda 00000001 f20398f0 f6908a70 000b68d8 f71a2c00 <0> 00000000 00000000 00029a90 f6908fa8 0000ffff f71a309c f6459e70 c03fd6ce Call Trace: [] ? sd_prep_fn+0x212/0x858 [] ? __make_request+0x33a/0x372 [] ? generic_make_request+0x27d/0x2dd [] ? blk_peek_request+0x8d/0x12a [] ? scsi_request_fn+0x67/0x3bf [] ? __generic_unplug_device+0x26/0x29 [] ? generic_unplug_device+0x21/0x2f [] ? blk_unplug+0xc/0xe [] ? unplug_slaves+0x83/0xd3 [raid1] [] ? raid1d+0xdd2/0xe6d [raid1] [] ? finish_task_switch+0x38/0x9a [] ? schedule+0x722/0x7c4 [] ? irq_exit+0x39/0x66 [] ? smp_apic_timer_interrupt+0x6e/0x7c [] ? apic_timer_interrupt+0x2a/0x30 [] ? schedule_timeout+0x18/0x161 [] ? _raw_spin_unlock_irqrestore+0x7/0x1e [] ? finish_wait+0x44/0x49 [] ? md_thread+0xd8/0xef [] ? autoremove_wake_function+0x0/0x33 [] ? md_thread+0x0/0xef [] ? kthread+0x64/0x69 [] ? kthread+0x0/0x69 [] ? kernel_thread_helper+0x6/0x10 Code: c0 75 77 8b 86 58 02 00 00 85 c0 74 17 8b 00 85 c0 74 11 8b 48 24 85 c9 74 0a 89 fa 89 f0 ff d1 85 c0 75 56 66 83 7f 6c 00 75 04 <0f> 0b eb fe 8b 5f 74 85 db 75 1a ba 20 00 00 00 89 f0 e8 a1 ba EIP: [] scsi_setup_fs_cmnd+0x3e/0x93 SS:ESP 0068:f6459d8c ---[ end trace 65dd6018ead1ae84 ]--- ------------[ cut here ]------------ kernel BUG at drivers/scsi/scsi_lib.c:1113! invalid opcode: 0000 [#2] PREEMPT SMP last sysfs file: /sys/devices/pci0000:00/0000:00:05.2/host5/target5:0:0/5:0:0:0/block/sde/uevent Modules linked in: raid1 nvidia(P) k8temp asus_atk0110 hwmon i2c_nforce2 Pid: 779, comm: kworker/1:2 Tainted: P D 2.6.36-rc1 #4 M2N-E/System Product Name EIP: 0060:[] EFLAGS: 00010046 CPU: 1 EIP is at scsi_setup_fs_cmnd+0x3e/0x93 EAX: 00000000 EBX: f68fa800 ECX: 00000002 EDX: f2039a90 ESI: f71a3800 EDI: f2039a90 EBP: f68a7e98 ESP: f68a7e88 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process kworker/1:2 (pid: 779, ti=f68a6000 task=f710f8e0 task.ti=f68a6000) Stack: f693b2f8 f68fa800 f6908fa8 00000000 f68a7efc c04968de 00000000 f710f90c <0> a18be96d 00000012 c2606e84 00000001 f2039a90 f6908fa8 000b6966 f71a3800 <0> 00000000 00000000 0002e96d 00000012 c2606e84 f71a3c9c 00000001 c2606ea0 Call Trace: [] ? sd_prep_fn+0x212/0x858 [] ? blk_peek_request+0x8d/0x12a [] ? scsi_request_fn+0x67/0x3bf [] ? __blk_run_queue+0x79/0x12d [] ? cfq_kick_queue+0x23/0x32 [] ? process_one_work+0x1c5/0x2d5 [] ? cfq_kick_queue+0x0/0x32 [] ? worker_thread+0x190/0x2d4 [] ? worker_thread+0x0/0x2d4 [] ? kthread+0x64/0x69 [] ? kthread+0x0/0x69 [] ? kernel_thread_helper+0x6/0x10 Code: c0 75 77 8b 86 58 02 00 00 85 c0 74 17 8b 00 85 c0 74 11 8b 48 24 85 c9 74 0a 89 fa 89 f0 ff d1 85 c0 75 56 66 83 7f 6c 00 75 04 <0f> 0b eb fe 8b 5f 74 85 db 75 1a ba 20 00 00 00 89 f0 e8 a1 ba EIP: [] scsi_setup_fs_cmnd+0x3e/0x93 SS:ESP 0068:f68a7e88 ---[ end trace 65dd6018ead1ae85 ]--- note: kworker/1:2[779] exited with preempt_count 1 BUG: unable to handle kernel paging request at fffffffc IP: [] kthread_data+0x9/0xe *pde = 008bb067 *pte = 00000000 Oops: 0000 [#3] PREEMPT SMP last sysfs file: /sys/devices/pci0000:00/0000:00:05.2/host5/target5:0:0/5:0:0:0/block/sde/uevent Modules linked in: raid1 nvidia(P) k8temp asus_atk0110 hwmon i2c_nforce2 Pid: 779, comm: kworker/1:2 Tainted: P D 2.6.36-rc1 #4 M2N-E/System Product Name EIP: 0060:[] EFLAGS: 00010002 CPU: 1 EIP is at kthread_data+0x9/0xe EAX: 00000000 EBX: 00000001 ECX: f710f8e0 EDX: 00000001 ESI: f710fa88 EDI: f710f8e0 EBP: f68a7ca4 ESP: f68a7ca4 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process kworker/1:2 (pid: 779, ti=f68a6000 task=f710f8e0 task.ti=f68a6000) Stack: f68a7cb4 c023955a f710f8e0 f710fa88 f68a7d18 c06541a5 00000092 c2603be8 <0> c08b0e40 c08b0e40 f710f8e0 00000286 c2606e40 00000001 f710f8e0 00000000 <0> f68a7cec c0268194 f68a7cf4 f710fa88 f710fa84 c022ab29 c08ad82c f689b984 Call Trace: [] ? wq_worker_sleeping+0xc/0x75 [] ? schedule+0x118/0x7c4 [] ? call_rcu_sched+0xd/0xf [] ? release_task+0x386/0x396 [] ? do_exit+0x5f6/0x604 [] ? oops_end+0x92/0x9a [] ? die+0x54/0x5a [] ? do_trap+0x89/0xa2 [] ? do_invalid_op+0x0/0x7b [] ? do_invalid_op+0x71/0x7b [] ? scsi_setup_fs_cmnd+0x3e/0x93 [] ? nv_swncq_host_interrupt+0x470/0x5ae [] ? hrtimer_forward+0xf4/0x10a [] ? lapic_next_event+0x16/0x1a [] ? clockevents_program_event+0xbe/0xcd [] ? error_code+0x5a/0x60 [] ? do_invalid_op+0x0/0x7b [] ? scsi_setup_fs_cmnd+0x3e/0x93 [] ? sd_prep_fn+0x212/0x858 [] ? blk_peek_request+0x8d/0x12a [] ? scsi_request_fn+0x67/0x3bf [] ? __blk_run_queue+0x79/0x12d [] ? cfq_kick_queue+0x23/0x32 [] ? process_one_work+0x1c5/0x2d5 [] ? cfq_kick_queue+0x0/0x32 [] ? worker_thread+0x190/0x2d4 [] ? worker_thread+0x0/0x2d4 [] ? kthread+0x64/0x69 [] ? kthread+0x0/0x69 [] ? kernel_thread_helper+0x6/0x10 Code: e8 50 a6 41 00 8d 65 f4 5b 5e 5f c9 c3 90 55 64 a1 7c b4 8a c0 8b 80 7c 01 00 00 89 e5 8b 40 f8 c9 c3 55 8b 80 7c 01 00 00 89 e5 <8b> 40 fc c9 c3 55 83 c0 24 89 e5 e8 be 22 fe ff c9 c3 55 89 e5 EIP: [] kthread_data+0x9/0xe SS:ESP 0068:f68a7ca4 CR2: 00000000fffffffc ---[ end trace 65dd6018ead1ae86 ]--- Fixing recursive fault but reboot is needed! note: md0_raid1[1451] exited with preempt_count 1