Linux version 2.6.6-rc1 (root@buick) (gcc version 3.3.3 (Debian 20040401)) #3 SMP Sat Apr 17 15:44:15 CEST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. found SMP MP-table at 000f5e20 On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 VIA694 ) @ 0x000f7630 ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000 ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 ACPI: MADT (v001 VIA694 0x32303033 0x00000000) @ 0x1fff59c0 ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 17 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:8 APIC version 17 Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Built 1 zonelists Kernel command line: root=/dev/hdb1 ro pci=noacpi Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1003.755 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Memory: 514752k/524224k available (2870k kernel code, 8708k reserved, 957k data, 408k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1990.65 BogoMIPS Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel Pentium III (Coppermine) stepping 06 per-CPU timeslice cutoff: 731.80 usecs. task migration cache decay timeout: 1 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 2002.94 BogoMIPS CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Pentium III (Coppermine) stepping 0a Total of 2 processors activated (3993.60 BogoMIPS). ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 22. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 001 01 0 0 0 0 0 1 1 51 07 001 01 0 0 0 0 0 1 1 59 08 001 01 0 0 0 0 0 1 1 61 09 001 01 0 0 0 0 0 1 1 69 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 001 01 0 0 0 0 0 1 1 71 0d 001 01 0 0 0 0 0 1 1 79 0e 001 01 0 0 0 0 0 1 1 81 0f 001 01 0 0 0 0 0 1 1 89 10 001 01 1 1 0 1 0 1 1 91 11 001 01 1 1 0 1 0 1 1 99 12 001 01 1 1 0 1 0 1 1 A1 13 001 01 1 1 0 1 0 1 1 A9 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1003.0519 MHz. ..... host bus clock speed is 133.0802 MHz. checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb2d0, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) mtrr: your CPUs had inconsistent variable MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: Subsystem revision 20040326 ACPI: IRQ9 SCI: Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Using IRQ router VIA [1106/0596] at 0000:00:07.0 PCI->APIC IRQ transform: (B0,I7,P3) -> 19 PCI->APIC IRQ transform: (B0,I12,P0) -> 19 PCI->APIC IRQ transform: (B0,I13,P0) -> 16 PCI->APIC IRQ transform: (B0,I13,P1) -> 17 PCI->APIC IRQ transform: (B0,I13,P2) -> 18 PCI->APIC IRQ transform: (B0,I14,P0) -> 17 PCI->APIC IRQ transform: (B0,I16,P0) -> 19 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 Bluetooth: Core ver 2.4 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized radeonfb: Found Intel x86 BIOS ROM Image radeonfb: Retreived PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=166.00 Mhz, System=166.00 MHz radeonfb: No connector info table detected radeonfb: Monitor 1 type DFP found radeonfb: EDID probed EDID checksum failed, aborting EDID checksum failed, aborting EDID checksum failed, aborting radeonfb: Assuming panel size 1024x768 radeonfb: ATI Radeon QD DDR SGRAM 32 MB Starting balanced_irq ikconfig 0.7 with /proc/config* VFS: Disk quotas dquot_6.5.1 NTFS driver 2.1.6 [Flags: R/O]. udf: registering filesystem Initializing Cryptographic API Activating ISA DMA hang workarounds. PCI: Via IRQ fixup for 0000:00:07.2, from 11 to 3 ACPI: Power Button (FF) [PWRF] ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) ACPI: Thermal Zone [THRM] (28 C) Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA Apollo Pro 133 chipset agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 64M @ 0xd8000000 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport0: PC-style at 0x3bc (0x7bc) [PCSPP,TRISTATE] parport0: irq 7 detected Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) e100: Intel(R) PRO/100 Network Driver, 3.0.17 e100: Copyright(c) 1999-2004 Intel Corporation e100: eth0: e100_probe: addr 0xdf101000, irq 19, MAC addr 00:50:45:00:3D:8E PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c596b (rev 23) IDE UDMA66 controller on pci0000:00:07.1 ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:pio, hdd:DMA hda: ST360021A, ATA DISK drive hdb: ST320011A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdd: HL-DT-ST GCE-8320B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 CMD649: IDE controller at PCI slot 0000:00:0c.0 CMD649: chipset revision 1 CMD649: 100% native mode on irq 19 ide2: BM-DMA at 0xb800-0xb807, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xb808-0xb80f, BIOS settings: hdg:pio, hdh:pio hda: max request size: 128KiB hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(66) hda: hda1 hda2 < hda5 > hdb: max request size: 128KiB hdb: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(66) hdb: hdb1 hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 ehci_hcd 0000:00:0d.2: NEC Corporation USB 2.0 ehci_hcd 0000:00:0d.2: irq 18, pci mem e1831000 ehci_hcd 0000:00:0d.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0d.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Dec-29 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 ohci_hcd 0000:00:0d.0: NEC Corporation USB ohci_hcd 0000:00:0d.0: irq 16, pci mem e1833000 ohci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ohci_hcd 0000:00:0d.1: NEC Corporation USB (#2) ohci_hcd 0000:00:0d.1: irq 17, pci mem e1835000 ohci_hcd 0000:00:0d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:07.2: VIA Technologies, Inc. USB uhci_hcd 0000:00:07.2: irq 19, io base 0000a400 uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver hiddev usbcore: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: PC Speaker gameport: pci0000:00:0e.1 speed 1242 kHz serio: i8042 AUX port at 0x60,0x64 irq 12 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 i2c /dev entries driver Bluetooth: HCI USB driver ver 2.5 usbcore: registered new driver hci_usb Advanced Linux Sound Architecture Driver Version 1.0.4rc2 (Tue Mar 30 08:19:30 2004 UTC). ALSA device list: #0: Sound Blaster Live! (rev.4) at 0xbc00, irq 17 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET: Registered protocol family 1 NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.1 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.3 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM ver 1.2 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.0 Bluetooth: BNEP filters: protocol multicast kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 408k freed usb 4-2: new full speed USB device using address 2 EXT3 FS on hdb1, internal journal usb 4-2: control timeout on ep0out uhci_hcd 0000:00:07.2: Unlink after no-IRQ? Different ACPI or APIC settings may help. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex usb 4-2: device not accepting address 2, error -71 nfs warning: mount version older than kernel usb 4-2: new full speed USB device using address 3 usb 4-2: config 1 has an invalid descriptor of length 24 usb 4-2: can't read configurations, error -22