Linux version 2.6.32.5 (root@midas64) (gcc version 4.4.3 (GCC) ) #2 SMP Sat Jan 23 14:39:21 CST 2010 Command line: auto BOOT_IMAGE=Slack64Generic ro root=900 vt.default_utf8=1 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000006ffa0000 (usable) BIOS-e820: 000000006ffa0000 - 000000006ffae000 (ACPI data) BIOS-e820: 000000006ffae000 - 000000006ffd0000 (ACPI NVS) BIOS-e820: 000000006ffd0000 - 0000000070000000 (reserved) BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x6ffa0 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FFC0000000 write-back 1 base 0040000000 mask FFE0000000 write-back 2 base 0060000000 mask FFF0000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000006ffa0000 0000000000 - 006fe00000 page 2M 006fe00000 - 006ffa0000 page 4k kernel direct mapping tables up to 6ffa0000 @ 10000-14000 RAMDISK: 00cbd000 - 00effc90 ACPI: RSDP 00000000000fb500 00014 (v00 ACPIAM) ACPI: RSDT 000000006ffa0000 0003C (v01 041508 RSDT1642 20080415 MSFT 00000097) ACPI: FACP 000000006ffa0200 00084 (v01 041508 FACP1642 20080415 MSFT 00000097) ACPI: DSDT 000000006ffa05c0 06DFD (v01 A0896 A0896001 00000001 INTL 20051117) ACPI: FACS 000000006ffae000 00040 ACPI: APIC 000000006ffa0390 0006C (v01 041508 APIC1642 20080415 MSFT 00000097) ACPI: MCFG 000000006ffa0400 0003C (v01 041508 OEMMCFG 20080415 MSFT 00000097) ACPI: OEMB 000000006ffae040 00071 (v01 041508 OEMB1642 20080415 MSFT 00000097) ACPI: HPET 000000006ffa73c0 00038 (v01 041508 OEMHPET 20080415 MSFT 00000097) ACPI: SSDT 000000006ffa7400 00206 (v01 A_M_I_ POWERNOW 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 006ffa0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001710184] TEXT DATA BSS ==> [0001000000 - 0001710184] #3 [0000cbd000 - 0000effc90] RAMDISK ==> [0000cbd000 - 0000effc90] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] #5 [0001711000 - 000171135c] BRK ==> [0001711000 - 000171135c] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] found SMP MP-table at [ffff8800000ff780] ff780 [ffffea0000000000-ffffea00019fffff] PMD -> [ffff880001c00000-ffff8800035fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009e 0: 0x00000100 -> 0x0006ffa0 On node 0 totalpages: 458542 DMA zone: 56 pages used for memmap DMA zone: 680 pages reserved DMA zone: 3246 pages, LIFO batch:0 DMA32 zone: 6215 pages used for memmap DMA32 zone: 448345 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8300 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009e000 - 000000000009f000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 70000000 (gap: 70000000:8f700000) NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 28 pages/cpu @ffff880001800000 s82072 r8192 d24424 u524288 pcpu-alloc: s82072 r8192 d24424 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 451591 Kernel command line: auto BOOT_IMAGE=Slack64Generic ro root=900 vt.default_utf8=1 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Node 0: aperture @ 326e000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 1793540k/1834624k available (3985k kernel code, 456k absent, 39984k reserved, 2101k data, 564k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:1280 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered HPET: 4 timers in total, 1 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 2101.057 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4202.11 BogoMIPS (lpj=2101057) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 16216 entries in 64 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) Dual Core Processor 4050e stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4201.42 BogoMIPS (lpj=2100710) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: AMD Athlon(tm) Dual Core Processor 4050e stepping 02 Brought up 2 CPUs Total of 2 processors activated (8403.53 BogoMIPS). devtmpfs: initialized xor: automatically using best checksumming function: generic_sse generic_sse: 6468.000 MB/sec xor: using function: generic_sse (6468.000 MB/sec) NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 0000000080000000 aka 2048M node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [80000000, fbefffff] node 0 link 0: mmio [fc000000, ffefffff] bus: [00,07] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [80000000, fbffffff] bus: 00 index 3 mmio: [fc000000, fcffffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff ACPI Warning: Incorrect checksum in table [OEMB] - 9B, should be 8E (20090903/tbutils-314) ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:11.0: reg 10 io port: [0xb000-0xb007] pci 0000:00:11.0: reg 14 io port: [0xa000-0xa003] pci 0000:00:11.0: reg 18 io port: [0x9000-0x9007] pci 0000:00:11.0: reg 1c io port: [0x8000-0x8003] pci 0000:00:11.0: reg 20 io port: [0x7000-0x700f] pci 0000:00:11.0: reg 24 32bit mmio: [0xfbbff800-0xfbbffbff] pci 0000:00:11.0: set SATA to AHCI mode pci 0000:00:12.0: reg 10 32bit mmio: [0xfbbfe000-0xfbbfefff] pci 0000:00:12.1: reg 10 32bit mmio: [0xfbbfd000-0xfbbfdfff] pci 0000:00:12.2: reg 10 32bit mmio: [0xfbbff000-0xfbbff0ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10 32bit mmio: [0xfbbfc000-0xfbbfcfff] pci 0000:00:13.1: reg 10 32bit mmio: [0xfbbfb000-0xfbbfbfff] pci 0000:00:13.2: reg 10 32bit mmio: [0xfbbfa800-0xfbbfa8ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.1: reg 10 io port: [0x00-0x07] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f] pci 0000:00:14.5: reg 10 32bit mmio: [0xfbbf9000-0xfbbf9fff] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:01:05.0: reg 14 io port: [0xc000-0xc0ff] pci 0000:01:05.0: reg 18 32bit mmio: [0xfbdf0000-0xfbdfffff] pci 0000:01:05.0: reg 24 32bit mmio: [0xfbc00000-0xfbcfffff] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] pci 0000:00:01.0: bridge 32bit mmio: [0xfbc00000-0xfbdfffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:02:00.0: reg 10 io port: [0xd800-0xd8ff] pci 0000:02:00.0: reg 18 64bit mmio: [0xfbeff000-0xfbefffff] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xfaff0000-0xfaffffff] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfbec0000-0xfbedffff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:06.0: bridge io port: [0xd000-0xdfff] pci 0000:00:06.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff] pci 0000:00:06.0: bridge 64bit mmio pref: [0xfaf00000-0xfaffffff] pci 0000:03:06.0: reg 10 io port: [0xec00-0xec0f] pci 0000:03:06.0: reg 14 io port: [0xe880-0xe88f] pci 0000:03:06.0: reg 18 io port: [0xe800-0xe80f] pci 0000:03:06.0: reg 1c io port: [0xe480-0xe48f] pci 0000:03:06.0: reg 20 io port: [0xe400-0xe41f] pci 0000:03:06.0: reg 24 io port: [0xe000-0xe0ff] pci 0000:03:06.0: reg 30 32bit mmio pref: [0xfbff0000-0xfbffffff] pci 0000:00:14.4: transparent bridge pci 0000:00:14.4: bridge io port: [0xe000-0xefff] pci 0000:00:14.4: bridge 32bit mmio: [0xfbf00000-0xfbffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb raid6: int64x1 1734 MB/s raid6: int64x2 2230 MB/s raid6: int64x4 1523 MB/s raid6: int64x8 1542 MB/s raid6: sse2x1 2906 MB/s raid6: sse2x2 3925 MB/s raid6: sse2x4 4042 MB/s raid6: using algorithm sse2x4 (4042 MB/s) PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter hpet: hpet2 irq 24 for MSI Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0x70000000-0x7fffffff has been reserved system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0c: ioport range 0x4d0-0x4d1 has been reserved system 00:0c: ioport range 0x40b-0x40b has been reserved system 00:0c: ioport range 0x4d6-0x4d6 has been reserved system 00:0c: ioport range 0xc00-0xc01 has been reserved system 00:0c: ioport range 0xc14-0xc14 has been reserved system 00:0c: ioport range 0xc50-0xc51 has been reserved system 00:0c: ioport range 0xc52-0xc52 has been reserved system 00:0c: ioport range 0xc6c-0xc6c has been reserved system 00:0c: ioport range 0xc6f-0xc6f has been reserved system 00:0c: ioport range 0xcd0-0xcd1 has been reserved system 00:0c: ioport range 0xcd2-0xcd3 has been reserved system 00:0c: ioport range 0xcd4-0xcd5 has been reserved system 00:0c: ioport range 0xcd6-0xcd7 has been reserved system 00:0c: ioport range 0xcd8-0xcdf has been reserved system 00:0c: ioport range 0xb00-0xb3f has been reserved system 00:0c: ioport range 0x800-0x89f has been reserved system 00:0c: ioport range 0xb20-0xb2f has been reserved system 00:0c: ioport range 0x900-0x90f has been reserved system 00:0c: ioport range 0x910-0x91f has been reserved system 00:0c: ioport range 0xfe00-0xfefe has been reserved system 00:0c: iomem range 0xffb80000-0xffbfffff has been reserved system 00:0c: iomem range 0xfec10000-0xfec1001f has been reserved system 00:0d: ioport range 0x230-0x23f has been reserved system 00:0d: ioport range 0x290-0x29f has been reserved system 00:0d: ioport range 0xa20-0xa2f has been reserved system 00:0d: ioport range 0xa30-0xa3f has been reserved system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved system 00:0f: iomem range 0x0-0x9ffff could not be reserved system 00:0f: iomem range 0xc0000-0xcffff has been reserved system 00:0f: iomem range 0xe0000-0xfffff could not be reserved system 00:0f: iomem range 0x100000-0x6fffffff could not be reserved system 00:0f: iomem range 0xfec00000-0xffffffff could not be reserved pci 0000:03:06.0: BAR 6: address space collision on of device [0xfbff0000-0xfbffffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xc000-0xcfff pci 0000:00:01.0: MEM window: 0xfbc00000-0xfbdfffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:06.0: PCI bridge, secondary bus 0000:02 pci 0000:00:06.0: IO window: 0xd000-0xdfff pci 0000:00:06.0: MEM window: 0xfbe00000-0xfbefffff pci 0000:00:06.0: PREFETCH window: 0x000000faf00000-0x000000faffffff pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 pci 0000:00:14.4: IO window: 0xe000-0xefff pci 0000:00:14.4: MEM window: 0xfbf00000-0xfbffffff pci 0000:00:14.4: PREFETCH window: 0x80000000-0x800fffff pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:06.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] pci_bus 0000:01: resource 1 mem: [0xfbc00000-0xfbdfffff] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] pci_bus 0000:02: resource 1 mem: [0xfbe00000-0xfbefffff] pci_bus 0000:02: resource 2 pref mem [0xfaf00000-0xfaffffff] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] pci_bus 0000:03: resource 1 mem: [0xfbf00000-0xfbffffff] pci_bus 0000:03: resource 2 pref mem [0x80000000-0x800fffff] pci_bus 0000:03: resource 3 io: [0x00-0xffff] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:01:05.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 2315k freed Intel AES-NI instructions are not detected. VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) ROMFS MTD (C) 2007 Red Hat, Inc. msgmni has been set to 3508 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for fcrypt (fcrypt-generic) alg: No test for stdrng (krng) async_tx: api initialized (async) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:06.0: irq 25 for MSI/MSI-X pcieport 0000:00:06.0: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: irq 26 for MSI/MSI-X ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xfbbff800 port 0xfbbff900 irq 26 ata2: SATA max UDMA/133 abar m1024@0xfbbff800 port 0xfbbff980 irq 26 ata3: SATA max UDMA/133 abar m1024@0xfbbff800 port 0xfbbffa00 irq 26 ata4: SATA max UDMA/133 abar m1024@0xfbbff800 port 0xfbbffa80 irq 26 sata_via 0000:03:06.0: version 2.4 sata_via 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 sata_via 0000:03:06.0: routed to hard irq line 10 scsi4 : sata_via scsi5 : sata_via scsi6 : sata_via ata5: SATA max UDMA/133 port i16@0xec00 bmdma 0xe400 irq 20 ata6: SATA max UDMA/133 port i16@0xe880 bmdma 0xe408 irq 20 ata7: PATA max UDMA/133 port i16@0xe800 bmdma 0xe410 irq 20 pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pata_atiixp 0000:00:14.1: setting latency timer to 64 scsi7 : pata_atiixp scsi8 : pata_atiixp ata8: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 ata9: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: multipath personality registered for level -4 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 310) ata3: softreset failed (device not ready) ata3: applying SB600 PMP SRST workaround and retrying ata1: softreset failed (device not ready) ata1: applying SB600 PMP SRST workaround and retrying ata2: softreset failed (device not ready) ata2: applying SB600 PMP SRST workaround and retrying ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-8: ST3500320AS, SD15, max UDMA/133 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata3.00: ATA-8: ST3500320AS, SD15, max UDMA/133 ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata3.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: ata2.00: ATA-8: ST3640323AS, CC1F, max UDMA/133 ata2.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32) sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA ST3640323AS CC1F PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 2:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5 sdb: sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdb1 sdb2 sd 1:0:0:0: [sdb] Attached SCSI disk unknown partition table sd 2:0:0:0: [sdc] Attached SCSI disk ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata6.00: ATA-8: WDC WD15EARS-00Z5B1, 80.00A80, max UDMA/133 ata6.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 0/32) ata6.00: configured for UDMA/133 scsi 5:0:0:0: Direct-Access ATA WDC WD15EARS-00Z 80.0 PQ: 0 ANSI: 5 sd 5:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) sd 5:0:0:0: [sdd] Write Protect is off sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: ata9.00: ATAPI: Optiarc DVD RW AD-7203S, 1.05, max UDMA/100 ata9.00: configured for UDMA/100 scsi 8:0:0:0: CD-ROM Optiarc DVD RW AD-7203S 1.05 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 8:0:0:0: Attached scsi CD-ROM sr0 sdd1 sd 5:0:0:0: [sdd] Attached SCSI disk registered taskstats version 1 Freeing unused kernel memory: 564k freed md: md0 stopped. md: bind md: bind raid1: raid set md0 active with 2 out of 2 mirrors md0: detected capacity change from 0 to 102396395520 md0: kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 5:0:0:0: Attached scsi generic sg3 type 0 sr 8:0:0:0: Attached scsi generic sg4 type 5 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:02:00.0: setting latency timer to 64 r8169 0000:02:00.0: irq 27 for MSI/MSI-X eth0: RTL8168c/8111c at 0xffffc90000060000, 00:1f:c6:e2:60:8a, XID 1c2000c0 IRQ 27 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbbff000 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32.5 ehci_hcd usb usb1: SerialNumber: 0000:00:12.2 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbbfa800 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32.5 ehci_hcd usb usb2: SerialNumber: 0000:00:13.2 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbbfe000 rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs parport_pc 00:07: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32.5 ohci_hcd usb usb3: SerialNumber: 0000:00:12.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbbfd000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32.5 ohci_hcd usb usb4: SerialNumber: 0000:00:12.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbbfc000 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32.5 ohci_hcd usb usb5: SerialNumber: 0000:00:13.0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbbfb000 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: OHCI Host Controller usb usb6: Manufacturer: Linux 2.6.32.5 ohci_hcd usb usb6: SerialNumber: 0000:00:13.1 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbbf9000 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: OHCI Host Controller usb usb7: Manufacturer: Linux 2.6.32.5 ohci_hcd usb usb7: SerialNumber: 0000:00:14.5 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected ppdev: user-space parallel port driver Adding 2000084k swap on /dev/sda3. Priority:-1 extents:1 across:2000084k EXT3 FS on md0, internal journal lp0: using parport0 (interrupt-driven). lp0: console ready Linux agpgart interface v0.103 kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdc, internal journal EXT3-fs: mounted filesystem with ordered data mode. VFS: Can't find ext3 filesystem on dev sdd. r8169: eth0: link up r8169: eth0: link up NET: Registered protocol family 10 lo: Disabled Privacy Extensions VFS: Can't find ext3 filesystem on dev sdd. ip_tables: (C) 2000-2006 Netfilter Core Team