[ 0.312208] pci_bus 0000:00: resource 13 [mem 0x000d0000-0x000d1fff window] [ 0.312209] pci_bus 0000:00: resource 14 [mem 0x000d2000-0x000d3fff window] [ 0.312210] pci_bus 0000:00: resource 15 [mem 0x000d4000-0x000d5fff window] [ 0.312210] pci_bus 0000:00: resource 16 [mem 0x000d6000-0x000d7fff window] [ 0.312211] pci_bus 0000:00: resource 17 [mem 0x000d8000-0x000d9fff window] [ 0.312212] pci_bus 0000:00: resource 18 [mem 0x000da000-0x000dbfff window] [ 0.312213] pci_bus 0000:00: resource 19 [mem 0x000dc000-0x000ddfff window] [ 0.312214] pci_bus 0000:00: resource 20 [mem 0x000de000-0x000dffff window] [ 0.312215] pci_bus 0000:00: resource 21 [mem 0x000e0000-0x000e1fff window] [ 0.312215] pci_bus 0000:00: resource 22 [mem 0x000e2000-0x000e3fff window] [ 0.312216] pci_bus 0000:00: resource 23 [mem 0x000e4000-0x000e5fff window] [ 0.312217] pci_bus 0000:00: resource 24 [mem 0x000e6000-0x000e7fff window] [ 0.312218] pci_bus 0000:00: resource 25 [mem 0x000e8000-0x000e9fff window] [ 0.312219] pci_bus 0000:00: resource 26 [mem 0x000ea000-0x000ebfff window] [ 0.312220] pci_bus 0000:00: resource 27 [mem 0x000ec000-0x000edfff window] [ 0.312221] pci_bus 0000:00: resource 28 [mem 0x000ee000-0x000effff window] [ 0.312221] pci_bus 0000:00: resource 29 [mem 0xe0000000-0xf7ffffff window] [ 0.312222] pci_bus 0000:00: resource 30 [mem 0xfc000000-0xfdffffff window] [ 0.312223] pci_bus 0000:00: resource 31 [io 0x0000-0x0cf7 window] [ 0.312224] pci_bus 0000:00: resource 32 [io 0x0d00-0xffff window] [ 0.312226] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.312226] pci_bus 0000:01: resource 1 [mem 0xf0b00000-0xf0bfffff] [ 0.312228] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.312229] pci_bus 0000:02: resource 1 [mem 0xf0a00000-0xf0afffff] [ 0.312347] NET: Registered protocol family 2 [ 0.312524] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.312647] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.312852] TCP: Hash tables configured (established 65536 bind 65536) [ 0.312908] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.312941] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.313029] NET: Registered protocol family 1 [ 0.313052] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.314098] PCI: CLS 32 bytes, default 64 [ 0.314149] Unpacking initramfs... [ 2.251045] Freeing initrd memory: 145784K [ 2.314297] AMD-Vi: IOMMU performance counters supported [ 2.314307] device: 'ivhd0': device_add [ 2.314330] PM: Adding info for No Bus:ivhd0 [ 2.314536] pci 0000:00:00.2: can't derive routing for PCI INT A [ 2.314537] pci 0000:00:00.2: PCI INT A: not connected [ 2.314725] iommu: Adding device 0000:00:01.0 to group 0 [ 2.314785] iommu: Using direct mapping for device 0000:00:01.0 [ 2.314814] iommu: Adding device 0000:00:01.1 to group 0 [ 2.314853] iommu: Adding device 0000:00:02.0 to group 1 [ 2.314866] iommu: Adding device 0000:00:02.3 to group 1 [ 2.314878] iommu: Adding device 0000:00:02.4 to group 1 [ 2.314945] iommu: Adding device 0000:00:03.0 to group 2 [ 2.315009] iommu: Adding device 0000:00:08.0 to group 3 [ 2.315079] iommu: Adding device 0000:00:09.0 to group 4 [ 2.315092] iommu: Adding device 0000:00:09.2 to group 4 [ 2.315155] iommu: Adding device 0000:00:10.0 to group 5 [ 2.315220] iommu: Adding device 0000:00:11.0 to group 6 [ 2.315282] iommu: Adding device 0000:00:12.0 to group 7 [ 2.315354] iommu: Adding device 0000:00:14.0 to group 8 [ 2.315369] iommu: Adding device 0000:00:14.3 to group 8 [ 2.315457] iommu: Adding device 0000:00:18.0 to group 9 [ 2.315470] iommu: Adding device 0000:00:18.1 to group 9 [ 2.315483] iommu: Adding device 0000:00:18.2 to group 9 [ 2.315495] iommu: Adding device 0000:00:18.3 to group 9 [ 2.315507] iommu: Adding device 0000:00:18.4 to group 9 [ 2.315519] iommu: Adding device 0000:00:18.5 to group 9 [ 2.315875] iommu: Adding device 0000:01:00.0 to group 1 [ 2.315890] iommu: Adding device 0000:02:00.0 to group 1 [ 2.316332] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 2.316334] AMD-Vi: Extended features (0x37ef22294ada): [ 2.316334] PPR NX GT IA GA PC GA_vAPIC [ 2.316914] AMD-Vi: Lazy IO/TLB flushing enabled [ 2.318217] amd_uncore: AMD NB counters detected [ 2.319769] LVT offset 0 assigned for vector 0x400 [ 2.320657] perf: AMD IBS detected (0x000007ff) [ 2.320671] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 2.320752] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d89a18e61, max_idle_ns: 440795276666 ns [ 2.320771] Registering platform device 'pcspkr'. Parent at platform [ 2.320773] device: 'pcspkr': device_add [ 2.320783] bus: 'platform': add device pcspkr [ 2.320794] PM: Adding info for platform:pcspkr [ 2.320811] Registering platform device 'efi-framebuffer.0'. Parent at platform [ 2.320812] device: 'efi-framebuffer.0': device_add [ 2.320814] bus: 'platform': add device efi-framebuffer.0 [ 2.320823] PM: Adding info for platform:efi-framebuffer.0 [ 2.320830] bus: 'pci': add driver iosf_mbi_pci [ 2.320869] device: 'snapshot': device_add [ 2.320877] PM: Adding info for No Bus:snapshot [ 2.321320] bus: 'clocksource': registered [ 2.321329] device: 'clocksource': device_add [ 2.321339] PM: Adding info for No Bus:clocksource [ 2.321341] device: 'clocksource0': device_add [ 2.321343] bus: 'clocksource': add device clocksource0 [ 2.321350] PM: Adding info for clocksource:clocksource0 [ 2.321360] bus: 'platform': add driver alarmtimer [ 2.321372] Registering platform device 'alarmtimer'. Parent at platform [ 2.321373] device: 'alarmtimer': device_add [ 2.321375] bus: 'platform': add device alarmtimer [ 2.321380] PM: Adding info for platform:alarmtimer [ 2.321387] bus: 'platform': driver_probe_device: matched device alarmtimer with driver alarmtimer [ 2.321389] bus: 'platform': really_probe: probing driver alarmtimer with device alarmtimer [ 2.321393] alarmtimer alarmtimer: no default pinctrl state [ 2.321400] devices_kset: Moving alarmtimer to end of list [ 2.321401] driver: 'alarmtimer': driver_bound: bound to device 'alarmtimer' [ 2.321402] bus: 'platform': really_probe: bound device alarmtimer to driver alarmtimer [ 2.321432] bus: 'clockevents': registered [ 2.321433] device: 'clockevents': device_add [ 2.321438] PM: Adding info for No Bus:clockevents [ 2.321439] device: 'clockevent0': device_add [ 2.321440] bus: 'clockevents': add device clockevent0 [ 2.321444] PM: Adding info for clockevents:clockevent0 [ 2.321449] device: 'clockevent1': device_add [ 2.321450] bus: 'clockevents': add device clockevent1 [ 2.321455] PM: Adding info for clockevents:clockevent1 [ 2.321458] device: 'clockevent2': device_add [ 2.321459] bus: 'clockevents': add device clockevent2 [ 2.321463] PM: Adding info for clockevents:clockevent2 [ 2.321466] device: 'clockevent3': device_add [ 2.321469] bus: 'clockevents': add device clockevent3 [ 2.321473] PM: Adding info for clockevents:clockevent3 [ 2.321476] device: 'broadcast': device_add [ 2.321477] bus: 'clockevents': add device broadcast [ 2.321481] PM: Adding info for clockevents:broadcast [ 2.321497] audit: initializing netlink subsys (disabled) [ 2.322096] audit: type=2000 audit(1505756452.321:1): state=initialized audit_enabled=0 res=1 [ 2.322236] bus: 'event_source': registered [ 2.322242] device: 'msr': device_add [ 2.322250] bus: 'event_source': add device msr [ 2.322259] PM: Adding info for event_source:msr [ 2.322263] device: 'amd_iommu_0': device_add [ 2.322278] bus: 'event_source': add device amd_iommu_0 [ 2.322285] PM: Adding info for event_source:amd_iommu_0 [ 2.322289] device: 'ibs_op': device_add [ 2.322291] bus: 'event_source': add device ibs_op [ 2.322296] PM: Adding info for event_source:ibs_op [ 2.322298] device: 'ibs_fetch': device_add [ 2.322300] bus: 'event_source': add device ibs_fetch [ 2.322307] PM: Adding info for event_source:ibs_fetch [ 2.322310] device: 'amd_nb': device_add [ 2.322313] bus: 'event_source': add device amd_nb [ 2.322318] PM: Adding info for event_source:amd_nb [ 2.322320] device: 'cpu': device_add [ 2.322329] bus: 'event_source': add device cpu [ 2.322334] PM: Adding info for event_source:cpu [ 2.322337] device: 'breakpoint': device_add [ 2.322338] bus: 'event_source': add device breakpoint [ 2.322345] PM: Adding info for event_source:breakpoint [ 2.322347] device: 'tracepoint': device_add [ 2.322348] bus: 'event_source': add device tracepoint [ 2.322353] PM: Adding info for event_source:tracepoint [ 2.322356] device: 'software': device_add [ 2.322358] bus: 'event_source': add device software [ 2.322364] PM: Adding info for event_source:software [ 2.322432] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 2.323143] zbud: loaded [ 2.606301] Key type asymmetric registered [ 2.606303] Asymmetric key parser 'x509' registered [ 2.606333] device class 'bsg': registering [ 2.606348] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.606398] io scheduler noop registered [ 2.606399] io scheduler deadline registered [ 2.606408] io scheduler cfq registered (default) [ 2.606409] io scheduler mq-deadline registered [ 2.606478] device class 'phy': registering [ 2.606538] bus: 'pci_express': registered [ 2.606540] bus: 'pci': add driver pcieport [ 2.606545] bus: 'pci': driver_probe_device: matched device 0000:00:02.3 with driver pcieport [ 2.606548] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:02.3 [ 2.606553] pcieport 0000:00:02.3: no default pinctrl state [ 2.606560] devices_kset: Moving 0000:00:02.3 to end of list [ 2.606847] device: '0000:00:02.3:pcie001': device_add [ 2.606889] bus: 'pci_express': add device 0000:00:02.3:pcie001 [ 2.606897] PM: Adding info for pci_express:0000:00:02.3:pcie001 [ 2.606932] driver: 'pcieport': driver_bound: bound to device '0000:00:02.3' [ 2.606933] bus: 'pci': really_probe: bound device 0000:00:02.3 to driver pcieport [ 2.606935] bus: 'pci': driver_probe_device: matched device 0000:00:02.4 with driver pcieport [ 2.606936] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:02.4 [ 2.606939] pcieport 0000:00:02.4: no default pinctrl state [ 2.606942] devices_kset: Moving 0000:00:02.4 to end of list [ 2.607099] device: '0000:00:02.4:pcie001': device_add [ 2.607101] bus: 'pci_express': add device 0000:00:02.4:pcie001 [ 2.607106] PM: Adding info for pci_express:0000:00:02.4:pcie001 [ 2.607134] driver: 'pcieport': driver_bound: bound to device '0000:00:02.4' [ 2.607135] bus: 'pci': really_probe: bound device 0000:00:02.4 to driver pcieport [ 2.607151] bus: 'pci_express': add driver aer [ 2.607155] bus: 'pci_express': add driver pcie_pme [ 2.607156] bus: 'pci_express': driver_probe_device: matched device 0000:00:02.3:pcie001 with driver pcie_pme [ 2.607157] bus: 'pci_express': really_probe: probing driver pcie_pme with device 0000:00:02.3:pcie001 [ 2.607158] pcie_pme 0000:00:02.3:pcie001: no default pinctrl state [ 2.607160] devices_kset: Moving 0000:00:02.3:pcie001 to end of list [ 2.607178] pcieport 0000:00:02.3: Signaling PME with IRQ 26 [ 2.607180] driver: 'pcie_pme': driver_bound: bound to device '0000:00:02.3:pcie001' [ 2.607181] bus: 'pci_express': really_probe: bound device 0000:00:02.3:pcie001 to driver pcie_pme [ 2.607182] bus: 'pci_express': driver_probe_device: matched device 0000:00:02.4:pcie001 with driver pcie_pme [ 2.607183] bus: 'pci_express': really_probe: probing driver pcie_pme with device 0000:00:02.4:pcie001 [ 2.607184] pcie_pme 0000:00:02.4:pcie001: no default pinctrl state [ 2.607186] devices_kset: Moving 0000:00:02.4:pcie001 to end of list [ 2.607197] pcieport 0000:00:02.4: Signaling PME with IRQ 27 [ 2.607199] driver: 'pcie_pme': driver_bound: bound to device '0000:00:02.4:pcie001' [ 2.607200] bus: 'pci_express': really_probe: bound device 0000:00:02.4:pcie001 to driver pcie_pme [ 2.607203] bus: 'pci_express': add driver dpc [ 2.607206] bus: 'pci_express': add driver pciehp [ 2.607213] bus: 'platform': add driver vesa-framebuffer [ 2.607223] bus: 'platform': add driver efi-framebuffer [ 2.607225] bus: 'platform': driver_probe_device: matched device efi-framebuffer.0 with driver efi-framebuffer [ 2.607227] bus: 'platform': really_probe: probing driver efi-framebuffer with device efi-framebuffer.0 [ 2.607228] efi-framebuffer efi-framebuffer.0: no default pinctrl state [ 2.607231] devices_kset: Moving efi-framebuffer.0 to end of list [ 2.607232] efifb: probing for efifb [ 2.607249] efifb: framebuffer at 0xe0000000, using 4224k, total 4224k [ 2.607250] efifb: mode is 1366x768x32, linelength=5632, pages=1 [ 2.607250] efifb: scrolling: redraw [ 2.607252] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.607258] device: 'fb0': device_add [ 2.607266] PM: Adding info for No Bus:fb0 [ 2.607489] device: 'vtcon1': device_add [ 2.607497] PM: Adding info for No Bus:vtcon1 [ 2.609286] Console: switching to colour frame buffer device 170x48 [ 2.610763] fb0: EFI VGA frame buffer device [ 2.610763] driver: 'efi-framebuffer': driver_bound: bound to device 'efi-framebuffer.0' [ 2.610764] bus: 'platform': really_probe: bound device efi-framebuffer.0 to driver efi-framebuffer [ 2.610770] bus: 'cpu': add driver processor [ 2.610773] bus: 'cpu': driver_probe_device: matched device cpu0 with driver processor [ 2.610774] bus: 'cpu': really_probe: probing driver processor with device cpu0 [ 2.610775] processor cpu0: no default pinctrl state [ 2.610777] devices_kset: Moving cpu0 to end of list [ 2.610810] device: 'cooling_device0': device_add [ 2.610821] PM: Adding info for No Bus:cooling_device0 [ 2.610825] driver: 'processor': driver_bound: bound to device 'cpu0' [ 2.610826] bus: 'cpu': really_probe: bound device cpu0 to driver processor [ 2.610828] bus: 'cpu': driver_probe_device: matched device cpu1 with driver processor [ 2.610829] bus: 'cpu': really_probe: probing driver processor with device cpu1 [ 2.610830] processor cpu1: no default pinctrl state [ 2.610832] devices_kset: Moving cpu1 to end of list [ 2.610857] device: 'cooling_device1': device_add [ 2.610864] PM: Adding info for No Bus:cooling_device1 [ 2.610868] driver: 'processor': driver_bound: bound to device 'cpu1' [ 2.610869] bus: 'cpu': really_probe: bound device cpu1 to driver processor [ 2.610870] bus: 'cpu': driver_probe_device: matched device cpu2 with driver processor [ 2.610871] bus: 'cpu': really_probe: probing driver processor with device cpu2 [ 2.610872] processor cpu2: no default pinctrl state [ 2.610874] devices_kset: Moving cpu2 to end of list [ 2.611072] device: 'cooling_device2': device_add [ 2.611082] PM: Adding info for No Bus:cooling_device2 [ 2.611086] driver: 'processor': driver_bound: bound to device 'cpu2' [ 2.611087] bus: 'cpu': really_probe: bound device cpu2 to driver processor [ 2.611089] bus: 'cpu': driver_probe_device: matched device cpu3 with driver processor [ 2.611090] bus: 'cpu': really_probe: probing driver processor with device cpu3 [ 2.611091] processor cpu3: no default pinctrl state [ 2.611093] devices_kset: Moving cpu3 to end of list [ 2.611124] device: 'cooling_device3': device_add [ 2.611132] PM: Adding info for No Bus:cooling_device3 [ 2.611136] driver: 'processor': driver_bound: bound to device 'cpu3' [ 2.611137] bus: 'cpu': really_probe: bound device cpu3 to driver processor [ 2.611143] bus: 'acpi': add driver hardware_error_device [ 2.611192] GHES: HEST is not enabled! [ 2.611194] bus: 'platform': add driver gpio-clk [ 2.611200] bus: 'platform': add driver clk-pmc-atom [ 2.611205] bus: 'pci': add driver xen-platform-pci [ 2.611221] device: 'ptmx': device_add [ 2.611230] PM: Adding info for No Bus:ptmx [ 2.611283] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.611292] bus: 'pnp': add driver serial [ 2.611312] Registering platform device 'serial8250'. Parent at platform [ 2.611313] device: 'serial8250': device_add [ 2.611315] bus: 'platform': add device serial8250 [ 2.611322] PM: Adding info for platform:serial8250 [ 2.611341] device: 'ttyS0': device_add [ 2.611358] PM: Adding info for No Bus:ttyS0 [ 2.611394] device: 'ttyS1': device_add [ 2.611408] PM: Adding info for No Bus:ttyS1 [ 2.611441] device: 'ttyS2': device_add [ 2.611454] PM: Adding info for No Bus:ttyS2 [ 2.611489] device: 'ttyS3': device_add [ 2.611501] PM: Adding info for No Bus:ttyS3 [ 2.611527] bus: 'platform': add driver serial8250 [ 2.611530] bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250 [ 2.611531] bus: 'platform': really_probe: probing driver serial8250 with device serial8250 [ 2.611533] serial8250 serial8250: no default pinctrl state [ 2.611535] devices_kset: Moving serial8250 to end of list [ 2.611536] driver: 'serial8250': driver_bound: bound to device 'serial8250' [ 2.611537] bus: 'platform': really_probe: bound device serial8250 to driver serial8250 [ 2.611541] bus: 'pci': add driver serial [ 2.611559] bus: 'pci': add driver exar_serial [ 2.611568] bus: 'platform': add driver dw-apb-uart [ 2.611577] bus: 'pci': add driver 8250_mid [ 2.611590] device: 'hpet': device_add [ 2.611598] PM: Adding info for No Bus:hpet [ 2.611622] bus: 'acpi': add driver hpet [ 2.611633] bus: 'acpi': driver_probe_device: matched device PNP0103:00 with driver hpet [ 2.611634] bus: 'acpi': really_probe: probing driver hpet with device PNP0103:00 [ 2.611636] hpet PNP0103:00: no default pinctrl state [ 2.611638] devices_kset: Moving PNP0103:00 to end of list [ 2.611677] hpet: probe of PNP0103:00 rejects match -19 [ 2.611685] Linux agpgart interface v0.103 [ 2.611686] bus: 'pci': add driver agpgart-amd64 [ 2.611703] bus: 'pci': driver_probe_device: matched device 0000:00:00.0 with driver agpgart-amd64 [ 2.611704] bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:00:00.0 [ 2.611706] agpgart-amd64 0000:00:00.0: no default pinctrl state [ 2.611709] devices_kset: Moving 0000:00:00.0 to end of list [ 2.611713] agpgart-amd64: probe of 0000:00:00.0 rejects match -19 [ 2.611714] bus: 'pci': driver_probe_device: matched device 0000:00:01.0 with driver agpgart-amd64 [ 2.611716] bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:00:01.0 [ 2.611717] agpgart-amd64 0000:00:01.0: no default pinctrl state [ 2.611720] devices_kset: Moving 0000:00:01.0 to end of list [ 2.611725] agpgart-amd64: probe of 0000:00:01.0 rejects match -19 [ 2.611726] bus: 'pci': driver_probe_device: matched device 0000:00:01.1 with driver agpgart-amd64 [ 2.611727] bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:00:01.1 [ 2.611729] agpgart-amd64 0000:00:01.1: no default pinctrl state [ 2.611732] devices_kset: Moving 0000:00:01.1 to end of list [ 2.611737] agpgart-amd64: probe of 0000:00:01.1 rejects match -19 [ 2.611738] bus: 'pci': driver_probe_device: matched device 0000:00:02.0 with driver agpgart-amd64 [ 2.611739] bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:00:02.0 [ 2.611741] agpgart-amd64 0000:00:02.0: no default pinctrl state [ 2.611743] devices_kset: Moving 0000:00:02.0 to end of list [ 2.611746] agpgart-amd64: probe of 0000:00:02.0 rejects match -19 [ 2.611747] bus: 'pci': driver_probe_device: matched device 0000:00:03.0 with driver agpgart-amd64 [ 2.611748] bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:00:03.0 [ 2.611750] agpgart-amd64 0000:00:03.0: no default pinctrl state [ 2.611753] devices_kset: Moving 0000:00:03.0 to end of list [ 2.611755] agpgart-amd64: probe of 0000:00:03.0 rejects match -19 [ 2.611757] bus: 'pci': driver_probe_device: matched device 0000:00:08.0 with driver agpgart-amd64 [ 2.611758] bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:00:08.0 [ 2.611759] agpgart-amd64 0000:00:08.0: no default pinctrl state [ 2.611762] devices_kset: Moving 0000:00:08.0 to end of list [ 2.611766] agpgart-amd64: probe of 0000:00:08.0 rejects match -19 [ 2.611768] bus: 'pci': driver_probe_device: matched device 0000:00:09.0 with driver agpgart-amd64 [ 2.611769] bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:00:09.0 [ 2.611770] agpgart-amd64 0000:00:09.0: no default pinctrl state [ 2.611773] devices_kset: Moving 0000:00:09.0 to end of list [ 2.611775] agpgart-amd64: probe of 0000:00:09.0 rejects match -19 [ 2.611776] bus: 'pci': driver_probe_device: matched device 0000:00:09.2 with driver agpgart-amd64 [ 2.611777] bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:00:09.2 [ 2.611779] agpgart-amd64 0000:00:09.2: no default pinctrl state [ 2.611781] devices_kset: Moving 0000:00:09.2 to end of list [ 2.611785] agpgart-amd64: probe of 0000:00:09.2 rejects match -19 [ 2.611786] bus: 'pci': driver_probe_device: matched device 0000:00:10.0 with driver agpgart-amd64 [ 2.611787] bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:00:10.0 [ 2.611788] agpgart-amd64 0000:00:10.0: no default pinctrl state [ 2.611791] devices_kset: Moving 0000:00:10.0 to end of list [ 2.611799] agpgart-amd64: probe of 0000:00:10.0 rejects match -19 [ 2.611800] bus: 'pci': driver_probe_device: matched device 0000:00:11.0 with driver agpgart-amd64 [ 2.611802] bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:00:11.0 [ 2.611803] agpgart-amd64 0000:00:11.0: no default pinctrl state [ 2.611806] devices_kset: Moving 0000:00:11.0 to end of list [ 2.611812] agpgart-amd64: probe of 0000:00:11.0 rejects match -19 [ 2.611813] bus: 'pci': driver_probe_device: matched device 0000:00:12.0 with driver agpgart-amd64 [ 2.611814] bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:00:12.0 [ 2.611815] agpgart-amd64 0000:00:12.0: no default pinctrl state [ 2.611818] devices_kset: Moving 0000:00:12.0 to end of list [ 2.611823] agpgart-amd64: probe of 0000:00:12.0 rejects match -19 [ 2.611824] bus: 'pci': driver_probe_device: matched device 0000:00:14.0 with driver agpgart-amd64 [ 2.611825] bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:00:14.0 [ 2.611826] agpgart-amd64 0000:00:14.0: no default pinctrl state [ 2.611829] devices_kset: Moving 0000:00:14.0 to end of list [ 2.611832] agpgart-amd64: probe of 0000:00:14.0 rejects match -19 [ 2.611833] bus: 'pci': driver_probe_device: matched device 0000:00:14.3 with driver agpgart-amd64 [ 2.611834] bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:00:14.3 [ 2.611835] agpgart-amd64 0000:00:14.3: no default pinctrl state [ 2.611838] devices_kset: Moving 0000:00:14.3 to end of list [ 2.611840] agpgart-amd64: probe of 0000:00:14.3 rejects match -19 [ 2.611842] bus: 'pci': driver_probe_device: matched device 0000:00:18.0 with driver agpgart-amd64 [ 2.611843] bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:00:18.0 [ 2.611844] agpgart-amd64 0000:00:18.0: no default pinctrl state [ 2.611847] devices_kset: Moving 0000:00:18.0 to end of list [ 2.611849] agpgart-amd64: probe of 0000:00:18.0 rejects match -19 [ 2.611850] bus: 'pci': driver_probe_device: matched device 0000:00:18.1 with driver agpgart-amd64 [ 2.611852] bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:00:18.1 [ 2.611853] agpgart-amd64 0000:00:18.1: no default pinctrl state [ 2.611856] devices_kset: Moving 0000:00:18.1 to end of list [ 2.611858] agpgart-amd64: probe of 0000:00:18.1 rejects match -19 [ 2.611859] bus: 'pci': driver_probe_device: matched device 0000:00:18.2 with driver agpgart-amd64 [ 2.611860] bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:00:18.2 [ 2.611861] agpgart-amd64 0000:00:18.2: no default pinctrl state [ 2.611864] devices_kset: Moving 0000:00:18.2 to end of list [ 2.611867] agpgart-amd64: probe of 0000:00:18.2 rejects match -19 [ 2.611868] bus: 'pci': driver_probe_device: matched device 0000:00:18.3 with driver agpgart-amd64 [ 2.611869] bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:00:18.3 [ 2.611870] agpgart-amd64 0000:00:18.3: no default pinctrl state [ 2.611873] devices_kset: Moving 0000:00:18.3 to end of list [ 2.611875] agpgart-amd64: probe of 0000:00:18.3 rejects match -19 [ 2.611877] bus: 'pci': driver_probe_device: matched device 0000:00:18.4 with driver agpgart-amd64 [ 2.611878] bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:00:18.4 [ 2.611879] agpgart-amd64 0000:00:18.4: no default pinctrl state [ 2.611881] devices_kset: Moving 0000:00:18.4 to end of list [ 2.611883] agpgart-amd64: probe of 0000:00:18.4 rejects match -19 [ 2.611885] bus: 'pci': driver_probe_device: matched device 0000:00:18.5 with driver agpgart-amd64 [ 2.611886] bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:00:18.5 [ 2.611887] agpgart-amd64 0000:00:18.5: no default pinctrl state [ 2.611890] devices_kset: Moving 0000:00:18.5 to end of list [ 2.611892] agpgart-amd64: probe of 0000:00:18.5 rejects match -19 [ 2.611893] bus: 'pci': driver_probe_device: matched device 0000:01:00.0 with driver agpgart-amd64 [ 2.611894] bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:01:00.0 [ 2.611895] agpgart-amd64 0000:01:00.0: no default pinctrl state [ 2.611898] devices_kset: Moving 0000:01:00.0 to end of list [ 2.612334] agpgart-amd64: probe of 0000:01:00.0 rejects match -19 [ 2.612335] bus: 'pci': driver_probe_device: matched device 0000:02:00.0 with driver agpgart-amd64 [ 2.612336] bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:02:00.0 [ 2.612338] agpgart-amd64 0000:02:00.0: no default pinctrl state [ 2.612352] devices_kset: Moving 0000:02:00.0 to end of list [ 2.612363] agpgart-amd64: probe of 0000:02:00.0 rejects match -19 [ 2.612367] bus: 'pci': remove driver agpgart-amd64 [ 2.612370] driver: 'agpgart-amd64': driver_release [ 2.612371] bus: 'pci': add driver agpgart-intel [ 2.612393] bus: 'pci': add driver agpgart-sis [ 2.612401] bus: 'pci': add driver agpgart-via [ 2.612411] bus: 'platform': add driver tpm_tis [ 2.612417] bus: 'pnp': add driver tpm_tis [ 2.612422] AMD IOMMUv2 driver by Joerg Roedel [ 2.612529] device: 'cache': device_add [ 2.612535] PM: Adding info for No Bus:cache [ 2.612538] device: 'index0': device_add [ 2.612549] PM: Adding info for No Bus:index0 [ 2.612551] device: 'index1': device_add [ 2.612560] PM: Adding info for No Bus:index1 [ 2.612561] device: 'index2': device_add [ 2.612571] PM: Adding info for No Bus:index2 [ 2.612586] device: 'cache': device_add [ 2.612593] PM: Adding info for No Bus:cache [ 2.612595] device: 'index0': device_add [ 2.612606] PM: Adding info for No Bus:index0 [ 2.612607] device: 'index1': device_add [ 2.612618] PM: Adding info for No Bus:index1 [ 2.612619] device: 'index2': device_add [ 2.612628] PM: Adding info for No Bus:index2 [ 2.612658] device: 'cache': device_add [ 2.612678] PM: Adding info for No Bus:cache [ 2.612683] device: 'index0': device_add [ 2.612698] PM: Adding info for No Bus:index0 [ 2.612700] device: 'index1': device_add [ 2.612710] PM: Adding info for No Bus:index1 [ 2.612712] device: 'index2': device_add [ 2.612720] PM: Adding info for No Bus:index2 [ 2.612741] device: 'cache': device_add [ 2.612750] PM: Adding info for No Bus:cache [ 2.612752] device: 'index0': device_add [ 2.612761] PM: Adding info for No Bus:index0 [ 2.612764] device: 'index1': device_add [ 2.612775] PM: Adding info for No Bus:index1 [ 2.612776] device: 'index2': device_add [ 2.612787] PM: Adding info for No Bus:index2 [ 2.612797] device class 'devcoredump': registering [ 2.612809] i8042: PNP detection disabled [ 2.614209] Registering platform device 'i8042'. Parent at platform [ 2.614210] device: 'i8042': device_add [ 2.614212] bus: 'platform': add device i8042 [ 2.614219] PM: Adding info for platform:i8042 [ 2.614225] bus: 'platform': add driver i8042 [ 2.614228] bus: 'platform': driver_probe_device: matched device i8042 with driver i8042 [ 2.614230] bus: 'platform': really_probe: probing driver i8042 with device i8042 [ 2.614232] i8042 i8042: no default pinctrl state [ 2.614234] devices_kset: Moving i8042 to end of list [ 2.632242] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.632251] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.632258] device: 'serio0': device_add [ 2.632272] bus: 'serio': add device serio0 [ 2.632287] PM: Adding info for serio:serio0 [ 2.632304] driver: 'i8042': driver_bound: bound to device 'i8042' [ 2.632306] device: 'serio1': device_add [ 2.632311] bus: 'serio': add device serio1 [ 2.632322] PM: Adding info for serio:serio1 [ 2.632328] bus: 'platform': really_probe: bound device i8042 to driver i8042 [ 2.632336] bus: 'serio': add driver serio_raw [ 2.632352] device: 'mice': device_add [ 2.632361] PM: Adding info for No Bus:mice [ 2.632426] device: 'psaux': device_add [ 2.632436] PM: Adding info for No Bus:psaux [ 2.632461] mousedev: PS/2 mouse device common for all mice [ 2.632464] bus: 'serio': add driver atkbd [ 2.632471] bus: 'i2c': add driver elan_i2c [ 2.632474] bus: 'serio': driver_probe_device: matched device serio0 with driver atkbd [ 2.632475] bus: 'serio': really_probe: probing driver atkbd with device serio0 [ 2.632480] atkbd serio0: no default pinctrl state [ 2.632484] devices_kset: Moving serio0 to end of list [ 2.632926] bus: 'i2c': probing driver elan_i2c asynchronously [ 2.632966] i2c-core: driver [elan_i2c] registered [ 2.632970] bus: 'platform': add driver gpio_mouse [ 2.633003] bus: 'serio': add driver psmouse [ 2.633013] bus: 'i2c': add driver synaptics_i2c [ 2.633043] i2c-core: driver [synaptics_i2c] registered [ 2.633045] bus: 'usb': add driver synaptics_usb [ 2.633052] usbcore: registered new interface driver synaptics_usb [ 2.633059] bus: 'rmi4': registered [ 2.633060] bus: 'rmi4': add driver rmi4_f01 [ 2.633066] bus: 'rmi4': add driver rmi4_f03 [ 2.633071] bus: 'rmi4': add driver rmi4_f11 [ 2.633076] bus: 'rmi4': add driver rmi4_f12 [ 2.633083] bus: 'rmi4': add driver rmi4_f30 [ 2.633087] bus: 'i2c': driver elan_i2c async attach completed: 0 [ 2.633105] bus: 'rmi4': add driver rmi4_physical [ 2.633110] bus: 'i2c': add driver rmi4_i2c [ 2.633113] i2c-core: driver [rmi4_i2c] registered [ 2.633115] bus: 'pnp': add driver rtc_cmos [ 2.633118] bus: 'pnp': driver_probe_device: matched device 00:01 with driver rtc_cmos [ 2.633120] bus: 'pnp': really_probe: probing driver rtc_cmos with device 00:01 [ 2.633121] rtc_cmos 00:01: no default pinctrl state [ 2.633124] devices_kset: Moving 00:01 to end of list [ 2.633139] rtc_cmos 00:01: RTC can wake from S4 [ 2.633210] device: 'rtc0': device_add [ 2.633224] PM: Adding info for No Bus:rtc0 [ 2.633280] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 2.633302] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs [ 2.633303] driver: 'rtc_cmos': driver_bound: bound to device '00:01' [ 2.633304] bus: 'pnp': really_probe: bound device 00:01 to driver rtc_cmos [ 2.633309] i2c /dev entries driver [ 2.633310] device class 'i2c-dev': registering [ 2.633318] device: 'i2c-0': device_add [ 2.633328] PM: Adding info for No Bus:i2c-0 [ 2.633354] i2c-dev: adapter [Synopsys DesignWare I2C adapter] registered as minor 0 [ 2.633356] bus: 'acpi': add driver cmi [ 2.633400] bus: 'pci': add driver piix4_smbus [ 2.633410] bus: 'pci': driver_probe_device: matched device 0000:00:14.0 with driver piix4_smbus [ 2.633412] bus: 'pci': really_probe: probing driver piix4_smbus with device 0000:00:14.0 [ 2.633413] piix4_smbus 0000:00:14.0: no default pinctrl state [ 2.633418] devices_kset: Moving 0000:00:14.0 to end of list [ 2.633435] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB.PCI0.SMB.SMB0) (20170531/utaddress-247) [ 2.633440] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.633444] piix4_smbus: probe of 0000:00:14.0 rejects match -19 [ 2.633453] bus: 'pci': add driver i2c-designware-pci [ 2.633463] bus: 'platform': add driver i2c-mux-gpio [ 2.633531] ledtrig-cpu: registered to indicate activity on CPUs [ 2.633723] Registering platform device 'efivars.0'. Parent at platform [ 2.633724] device: 'efivars.0': device_add [ 2.633728] bus: 'platform': add device efivars.0 [ 2.633735] PM: Adding info for platform:efivars.0 [ 2.633759] bus: 'hid': registered [ 2.633761] device class 'hidraw': registering [ 2.633764] hidraw: raw HID events driver (C) Jiri Kosina [ 2.633773] bus: 'hid': add driver hid-generic [ 2.633778] bus: 'hid': add driver lenovo [ 2.633783] bus: 'hid': add driver hid-rmi [ 2.633787] bus: 'i2c': add driver i2c_hid [ 2.633790] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 2.633801] i2c_designware AMD0010:00: Standard-mode HCNT:LCNT = 569:664 [ 2.633803] i2c_designware AMD0010:00: Fast-mode HCNT:LCNT = 117:212 [ 2.633806] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 2.633808] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 2.633810] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 2.633893] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 2.633893] i2c i2c-SYNA2B36:00: Added to deferred list [ 2.633901] i2c-core: driver [i2c_hid] registered [ 2.633906] bus: 'ishtp': registered [ 2.633908] bus: 'pci': add driver intel_ish_ipc [ 2.633953] device class 'powercap': registering [ 2.634062] NET: Registered protocol family 10 [ 2.634288] Segment Routing with IPv6 [ 2.634301] mip6: Mobile IPv6 [ 2.634302] NET: Registered protocol family 17 [ 2.634304] mpls_gso: MPLS GSO support [ 2.634316] bus: 'machinecheck': registered [ 2.634320] device: 'machinecheck': device_add [ 2.634327] PM: Adding info for No Bus:machinecheck [ 2.634333] device: 'machinecheck0': device_add [ 2.634335] bus: 'machinecheck': add device machinecheck0 [ 2.634340] PM: Adding info for machinecheck:machinecheck0 [ 2.634369] device: 'machinecheck1': device_add [ 2.634372] bus: 'machinecheck': add device machinecheck1 [ 2.634380] PM: Adding info for machinecheck:machinecheck1 [ 2.634412] device: 'machinecheck2': device_add [ 2.634423] bus: 'machinecheck': add device machinecheck2 [ 2.634437] PM: Adding info for machinecheck:machinecheck2 [ 2.634475] device: 'machinecheck3': device_add [ 2.634477] bus: 'machinecheck': add device machinecheck3 [ 2.634483] PM: Adding info for machinecheck:machinecheck3 [ 2.634645] Registering platform device 'microcode'. Parent at platform [ 2.634646] device: 'microcode': device_add [ 2.634649] bus: 'platform': add device microcode [ 2.634659] PM: Adding info for platform:microcode [ 2.634672] microcode: CPU0: patch_level=0x06006118 [ 2.634679] microcode: CPU1: patch_level=0x06006118 [ 2.634688] microcode: CPU2: patch_level=0x06006118 [ 2.634694] microcode: CPU3: patch_level=0x06006118 [ 2.634699] device: 'microcode': device_add [ 2.634708] PM: Adding info for No Bus:microcode [ 2.634742] microcode: Microcode Update Driver: v2.2. [ 2.634762] device: 'cpu_dma_latency': device_add [ 2.634769] PM: Adding info for No Bus:cpu_dma_latency [ 2.634792] device: 'network_latency': device_add [ 2.634800] PM: Adding info for No Bus:network_latency [ 2.634823] device: 'network_throughput': device_add [ 2.634830] PM: Adding info for No Bus:network_throughput [ 2.634853] device: 'memory_bandwidth': device_add [ 2.634861] PM: Adding info for No Bus:memory_bandwidth [ 2.634893] registered taskstats version 1 [ 2.634910] zswap: loaded using pool lzo/zbud [ 2.635030] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 2.636086] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 2.636089] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 2.636094] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 2.636097] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 2.636113] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 2.636119] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 2.636195] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 2.636195] i2c i2c-SYNA2B36:00: Added to deferred list [ 2.636267] rtc_cmos 00:01: setting system clock to 2017-09-18 17:40:53 UTC (1505756453) [ 2.636323] PM: Hibernation image not present or could not be loaded. [ 2.638499] Freeing unused kernel memory: 1536K [ 2.638501] Write protecting the kernel read-only data: 12288k [ 2.639013] Freeing unused kernel memory: 768K [ 2.640633] Freeing unused kernel memory: 844K [ 2.641080] device: 'input0': device_add [ 2.641114] PM: Adding info for No Bus:input0 [ 2.641133] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.641144] device: 'input0::numlock': device_add [ 2.641153] PM: Adding info for No Bus:input0::numlock [ 2.641163] device: 'input0::capslock': device_add [ 2.641172] PM: Adding info for No Bus:input0::capslock [ 2.641178] device: 'input0::scrolllock': device_add [ 2.641186] PM: Adding info for No Bus:input0::scrolllock [ 2.641195] device: 'event0': device_add [ 2.641203] PM: Adding info for No Bus:event0 [ 2.641247] driver: 'atkbd': driver_bound: bound to device 'serio0' [ 2.641252] bus: 'serio': really_probe: bound device serio0 to driver atkbd [ 2.641256] bus: 'serio': driver_probe_device: matched device serio1 with driver atkbd [ 2.641258] bus: 'serio': really_probe: probing driver atkbd with device serio1 [ 2.641262] atkbd serio1: no default pinctrl state [ 2.641267] devices_kset: Moving serio1 to end of list [ 2.641647] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 2.641649] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 2.641655] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 2.641657] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 2.641658] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 2.641662] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 2.641746] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 2.641747] i2c i2c-SYNA2B36:00: Added to deferred list [ 2.642332] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.664620] atkbd: probe of serio1 rejects match -19 [ 2.664629] bus: 'serio': driver_probe_device: matched device serio1 with driver psmouse [ 2.664631] bus: 'serio': really_probe: probing driver psmouse with device serio1 [ 2.664637] psmouse serio1: no default pinctrl state [ 2.664646] devices_kset: Moving serio1 to end of list [ 2.688730] psmouse: probe of serio1 rejects match -19 [ 2.712646] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.713349] ehci-pci: EHCI PCI platform driver [ 2.713358] bus: 'pci': add driver ehci-pci [ 2.713378] bus: 'pci': driver_probe_device: matched device 0000:00:12.0 with driver ehci-pci [ 2.713382] bus: 'pci': really_probe: probing driver ehci-pci with device 0000:00:12.0 [ 2.713389] ehci-pci 0000:00:12.0: no default pinctrl state [ 2.713397] devices_kset: Moving 0000:00:12.0 to end of list [ 2.713761] ehci-pci 0000:00:12.0: EHCI Host Controller [ 2.713779] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 2.713797] ehci-pci 0000:00:12.0: debug port 2 [ 2.713854] ehci-pci 0000:00:12.0: irq 18, io mem 0xf0c6d000 [ 2.714915] bus: 'pci': add driver xhci_hcd [ 2.715525] device class 'scsi_host': registering [ 2.715548] bus: 'scsi': registered [ 2.715548] device class 'scsi_device': registering [ 2.715565] SCSI subsystem initialized [ 2.718884] device class 'ata_link': registering [ 2.718895] device class 'ata_port': registering [ 2.718899] device class 'ata_device': registering [ 2.718906] libata version 3.00 loaded. [ 2.720321] bus: 'pci': add driver ahci [ 2.728058] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00 [ 2.728129] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.728131] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.728132] usb usb1: Product: EHCI Host Controller [ 2.728134] usb usb1: Manufacturer: Linux 4.13.2 ehci_hcd [ 2.728135] usb usb1: SerialNumber: 0000:00:12.0 [ 2.728139] device: 'usb1': device_add [ 2.728184] bus: 'usb': add device usb1 [ 2.728204] PM: Adding info for usb:usb1 [ 2.728254] bus: 'usb': driver_probe_device: matched device usb1 with driver usb [ 2.728256] bus: 'usb': really_probe: probing driver usb with device usb1 [ 2.728261] devices_kset: Moving usb1 to end of list [ 2.728274] device: '1-0:1.0': device_add [ 2.728283] bus: 'usb': add device 1-0:1.0 [ 2.728289] PM: Adding info for usb:1-0:1.0 [ 2.728299] bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub [ 2.728300] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0 [ 2.728304] hub 1-0:1.0: no default pinctrl state [ 2.728310] devices_kset: Moving 1-0:1.0 to end of list [ 2.728313] hub 1-0:1.0: USB hub found [ 2.728322] hub 1-0:1.0: 2 ports detected [ 2.728332] device: 'usb1-port1': device_add [ 2.728408] PM: Adding info for No Bus:usb1-port1 [ 2.728413] device: 'usb1-port2': device_add [ 2.728424] PM: Adding info for No Bus:usb1-port2 [ 2.728454] driver: 'hub': driver_bound: bound to device '1-0:1.0' [ 2.728460] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 2.728461] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 2.728468] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 2.728469] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 2.728472] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 2.728476] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 2.728541] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 2.728542] i2c i2c-SYNA2B36:00: Added to deferred list [ 2.728550] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub [ 2.728553] device: 'ep_81': device_add [ 2.728568] PM: Adding info for No Bus:ep_81 [ 2.728570] driver: 'usb': driver_bound: bound to device 'usb1' [ 2.728574] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 2.728576] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 2.728578] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 2.728579] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 2.728581] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 2.728584] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 2.728622] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 2.728623] i2c i2c-SYNA2B36:00: Added to deferred list [ 2.728628] bus: 'usb': really_probe: bound device usb1 to driver usb [ 2.728631] device: 'ep_00': device_add [ 2.728642] PM: Adding info for No Bus:ep_00 [ 2.728660] driver: 'ehci-pci': driver_bound: bound to device '0000:00:12.0' [ 2.728664] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 2.728665] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 2.728667] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 2.728669] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 2.728673] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 2.728677] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 2.728712] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 2.728713] i2c i2c-SYNA2B36:00: Added to deferred list [ 2.728719] bus: 'pci': really_probe: bound device 0000:00:12.0 to driver ehci-pci [ 2.728751] bus: 'pci': driver_probe_device: matched device 0000:00:10.0 with driver xhci_hcd [ 2.728752] bus: 'pci': really_probe: probing driver xhci_hcd with device 0000:00:10.0 [ 2.728754] xhci_hcd 0000:00:10.0: no default pinctrl state [ 2.728760] devices_kset: Moving 0000:00:10.0 to end of list [ 2.729007] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.729014] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 2.729245] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410 [ 2.729450] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.729452] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.729453] usb usb2: Product: xHCI Host Controller [ 2.729454] usb usb2: Manufacturer: Linux 4.13.2 xhci-hcd [ 2.729455] usb usb2: SerialNumber: 0000:00:10.0 [ 2.729458] device: 'usb2': device_add [ 2.729496] bus: 'usb': add device usb2 [ 2.729513] PM: Adding info for usb:usb2 [ 2.729576] bus: 'usb': driver_probe_device: matched device usb2 with driver usb [ 2.729578] bus: 'usb': really_probe: probing driver usb with device usb2 [ 2.729581] devices_kset: Moving usb2 to end of list [ 2.729593] device: '2-0:1.0': device_add [ 2.729600] bus: 'usb': add device 2-0:1.0 [ 2.729604] PM: Adding info for usb:2-0:1.0 [ 2.729614] bus: 'usb': driver_probe_device: matched device 2-0:1.0 with driver hub [ 2.729615] bus: 'usb': really_probe: probing driver hub with device 2-0:1.0 [ 2.729618] hub 2-0:1.0: no default pinctrl state [ 2.729621] devices_kset: Moving 2-0:1.0 to end of list [ 2.729623] hub 2-0:1.0: USB hub found [ 2.729635] hub 2-0:1.0: 4 ports detected [ 2.729645] device: 'usb2-port1': device_add [ 2.729676] PM: Adding info for No Bus:usb2-port1 [ 2.729685] device: 'usb2-port2': device_add [ 2.729706] PM: Adding info for No Bus:usb2-port2 [ 2.729709] device: 'usb2-port3': device_add [ 2.729733] PM: Adding info for No Bus:usb2-port3 [ 2.729736] device: 'usb2-port4': device_add [ 2.729757] PM: Adding info for No Bus:usb2-port4 [ 2.729806] driver: 'hub': driver_bound: bound to device '2-0:1.0' [ 2.729809] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 2.729811] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 2.729816] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 2.729817] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 2.729819] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 2.729823] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 2.729894] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 2.729895] i2c i2c-SYNA2B36:00: Added to deferred list [ 2.729902] bus: 'usb': really_probe: bound device 2-0:1.0 to driver hub [ 2.729905] device: 'ep_81': device_add [ 2.729924] PM: Adding info for No Bus:ep_81 [ 2.729925] driver: 'usb': driver_bound: bound to device 'usb2' [ 2.729930] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 2.729931] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 2.729933] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 2.729935] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 2.729937] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 2.729939] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 2.729977] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 2.729978] i2c i2c-SYNA2B36:00: Added to deferred list [ 2.729982] bus: 'usb': really_probe: bound device usb2 to driver usb [ 2.729985] device: 'ep_00': device_add [ 2.729994] PM: Adding info for No Bus:ep_00 [ 2.730017] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.730022] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3 [ 2.736155] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.736181] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.736182] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.736184] usb usb3: Product: xHCI Host Controller [ 2.736185] usb usb3: Manufacturer: Linux 4.13.2 xhci-hcd [ 2.736186] usb usb3: SerialNumber: 0000:00:10.0 [ 2.736189] device: 'usb3': device_add [ 2.736229] bus: 'usb': add device usb3 [ 2.736243] PM: Adding info for usb:usb3 [ 2.736329] bus: 'usb': driver_probe_device: matched device usb3 with driver usb [ 2.736331] bus: 'usb': really_probe: probing driver usb with device usb3 [ 2.736335] devices_kset: Moving usb3 to end of list [ 2.736348] device: '3-0:1.0': device_add [ 2.736356] bus: 'usb': add device 3-0:1.0 [ 2.736360] PM: Adding info for usb:3-0:1.0 [ 2.736370] bus: 'usb': driver_probe_device: matched device 3-0:1.0 with driver hub [ 2.736371] bus: 'usb': really_probe: probing driver hub with device 3-0:1.0 [ 2.736374] hub 3-0:1.0: no default pinctrl state [ 2.736377] devices_kset: Moving 3-0:1.0 to end of list [ 2.736379] hub 3-0:1.0: USB hub found [ 2.736389] hub 3-0:1.0: 4 ports detected [ 2.736398] device: 'usb3-port1': device_add [ 2.736448] PM: Adding info for No Bus:usb3-port1 [ 2.736461] device: 'usb3-port2': device_add [ 2.736482] PM: Adding info for No Bus:usb3-port2 [ 2.736489] device: 'usb3-port3': device_add [ 2.736507] PM: Adding info for No Bus:usb3-port3 [ 2.736517] device: 'usb3-port4': device_add [ 2.736536] PM: Adding info for No Bus:usb3-port4 [ 2.736577] driver: 'hub': driver_bound: bound to device '3-0:1.0' [ 2.736581] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 2.736582] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 2.736587] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 2.736588] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 2.736590] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 2.736593] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 2.736646] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 2.736647] i2c i2c-SYNA2B36:00: Added to deferred list [ 2.736652] bus: 'usb': really_probe: bound device 3-0:1.0 to driver hub [ 2.736655] device: 'ep_81': device_add [ 2.736666] PM: Adding info for No Bus:ep_81 [ 2.736667] driver: 'usb': driver_bound: bound to device 'usb3' [ 2.736670] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 2.736671] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 2.736673] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 2.736674] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 2.736676] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 2.736678] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 2.736707] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 2.736708] i2c i2c-SYNA2B36:00: Added to deferred list [ 2.736712] bus: 'usb': really_probe: bound device usb3 to driver usb [ 2.736714] device: 'ep_00': device_add [ 2.736723] PM: Adding info for No Bus:ep_00 [ 2.736727] driver: 'xhci_hcd': driver_bound: bound to device '0000:00:10.0' [ 2.736730] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 2.736732] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 2.736734] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 2.736735] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 2.736736] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 2.736738] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 2.736767] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 2.736768] i2c i2c-SYNA2B36:00: Added to deferred list [ 2.736772] bus: 'pci': really_probe: bound device 0000:00:10.0 to driver xhci_hcd [ 2.736790] bus: 'pci': driver_probe_device: matched device 0000:00:11.0 with driver ahci [ 2.736795] bus: 'pci': really_probe: probing driver ahci with device 0000:00:11.0 [ 2.736801] ahci 0000:00:11.0: no default pinctrl state [ 2.736812] devices_kset: Moving 0000:00:11.0 to end of list [ 2.736818] ahci 0000:00:11.0: version 3.0 [ 2.737162] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 2.737164] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part [ 2.737269] device: 'ata1': device_add [ 2.737283] PM: Adding info for No Bus:ata1 [ 2.737286] device: 'ata1': device_add [ 2.737297] PM: Adding info for No Bus:ata1 [ 2.737317] device: 'link1': device_add [ 2.737324] PM: Adding info for No Bus:link1 [ 2.737325] device: 'link1': device_add [ 2.737336] PM: Adding info for No Bus:link1 [ 2.737447] device: 'dev1.0': device_add [ 2.737454] PM: Adding info for No Bus:dev1.0 [ 2.737455] device: 'dev1.0': device_add [ 2.737463] PM: Adding info for No Bus:dev1.0 [ 2.737477] device: 'ata2': device_add [ 2.737485] PM: Adding info for No Bus:ata2 [ 2.737486] device: 'ata2': device_add [ 2.737534] PM: Adding info for No Bus:ata2 [ 2.737541] device: 'link2': device_add [ 2.737546] PM: Adding info for No Bus:link2 [ 2.737547] device: 'link2': device_add [ 2.737554] PM: Adding info for No Bus:link2 [ 2.737625] device: 'dev2.0': device_add [ 2.737631] PM: Adding info for No Bus:dev2.0 [ 2.737632] device: 'dev2.0': device_add [ 2.737638] PM: Adding info for No Bus:dev2.0 [ 2.737950] scsi host0: ahci [ 2.737958] device: 'host0': device_add [ 2.737970] bus: 'scsi': add device host0 [ 2.737982] PM: Adding info for scsi:host0 [ 2.738004] device: 'host0': device_add [ 2.738026] PM: Adding info for No Bus:host0 [ 2.738135] scsi host1: ahci [ 2.738137] device: 'host1': device_add [ 2.738141] bus: 'scsi': add device host1 [ 2.738148] PM: Adding info for scsi:host1 [ 2.738158] device: 'host1': device_add [ 2.738178] PM: Adding info for No Bus:host1 [ 2.738191] ata1: SATA max UDMA/133 abar m1024@0xf0c6c000 port 0xf0c6c100 irq 33 [ 2.738193] ata2: SATA max UDMA/133 abar m1024@0xf0c6c000 port 0xf0c6c180 irq 33 [ 2.738201] driver: 'ahci': driver_bound: bound to device '0000:00:11.0' [ 2.738207] bus: 'pci': really_probe: bound device 0000:00:11.0 to driver ahci [ 2.738244] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 2.738246] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 2.738253] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 2.738255] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 2.738259] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 2.738265] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 2.738352] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 2.738353] i2c i2c-SYNA2B36:00: Added to deferred list [ 3.056261] usb 2-3: new low-speed USB device number 2 using xhci_hcd [ 3.056276] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.205051] usb 1-1: New USB device found, idVendor=0438, idProduct=7900 [ 3.205054] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.205057] device: '1-1': device_add [ 3.205084] bus: 'usb': add device 1-1 [ 3.205095] PM: Adding info for usb:1-1 [ 3.205403] bus: 'usb': driver_probe_device: matched device 1-1 with driver usb [ 3.205407] bus: 'usb': really_probe: probing driver usb with device 1-1 [ 3.205411] usb 1-1: no default pinctrl state [ 3.205416] devices_kset: Moving 1-1 to end of list [ 3.206292] device: '1-1:1.0': device_add [ 3.206304] bus: 'usb': add device 1-1:1.0 [ 3.206316] PM: Adding info for usb:1-1:1.0 [ 3.206419] bus: 'usb': driver_probe_device: matched device 1-1:1.0 with driver hub [ 3.206421] bus: 'usb': really_probe: probing driver hub with device 1-1:1.0 [ 3.206426] hub 1-1:1.0: no default pinctrl state [ 3.206431] devices_kset: Moving 1-1:1.0 to end of list [ 3.206435] hub 1-1:1.0: USB hub found [ 3.207544] hub 1-1:1.0: 4 ports detected [ 3.208342] device: '1-1-port1': device_add [ 3.208430] PM: Adding info for No Bus:1-1-port1 [ 3.208442] device: '1-1-port2': device_add [ 3.208511] PM: Adding info for No Bus:1-1-port2 [ 3.208514] device: '1-1-port3': device_add [ 3.208522] PM: Adding info for No Bus:1-1-port3 [ 3.208525] device: '1-1-port4': device_add [ 3.208535] PM: Adding info for No Bus:1-1-port4 [ 3.210545] driver: 'hub': driver_bound: bound to device '1-1:1.0' [ 3.210552] bus: 'usb': really_probe: bound device 1-1:1.0 to driver hub [ 3.210562] device: 'ep_81': device_add [ 3.210582] PM: Adding info for No Bus:ep_81 [ 3.210584] driver: 'usb': driver_bound: bound to device '1-1' [ 3.210585] bus: 'usb': really_probe: bound device 1-1 to driver usb [ 3.210592] device: 'ep_00': device_add [ 3.210604] PM: Adding info for No Bus:ep_00 [ 3.210609] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 3.210611] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 3.210617] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 3.210619] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 3.210623] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 3.210628] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 3.210706] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 3.210706] i2c i2c-SYNA2B36:00: Added to deferred list [ 3.216316] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.219829] ata2.00: ATAPI: PLDS DVD-RW DA8AESH, XL6M, max UDMA/133 [ 3.220798] ata2.00: configured for UDMA/133 [ 3.226354] usb 2-3: New USB device found, idVendor=0461, idProduct=4de2 [ 3.226356] usb 2-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.226357] usb 2-3: Product: USB Optical Mouse [ 3.226361] device: '2-3': device_add [ 3.226389] bus: 'usb': add device 2-3 [ 3.226399] PM: Adding info for usb:2-3 [ 3.226848] bus: 'usb': driver_probe_device: matched device 2-3 with driver usb [ 3.226852] bus: 'usb': really_probe: probing driver usb with device 2-3 [ 3.226857] usb 2-3: no default pinctrl state [ 3.226863] devices_kset: Moving 2-3 to end of list [ 3.229450] device: '2-3:1.0': device_add [ 3.229462] bus: 'usb': add device 2-3:1.0 [ 3.229469] PM: Adding info for usb:2-3:1.0 [ 3.229539] device: 'ep_81': device_add [ 3.229550] PM: Adding info for No Bus:ep_81 [ 3.229565] driver: 'usb': driver_bound: bound to device '2-3' [ 3.229568] bus: 'usb': really_probe: bound device 2-3 to driver usb [ 3.229579] device: 'ep_00': device_add [ 3.229589] PM: Adding info for No Bus:ep_00 [ 3.229607] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 3.229608] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 3.229615] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 3.229617] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 3.229621] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 3.229626] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 3.229712] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 3.229713] i2c i2c-SYNA2B36:00: Added to deferred list [ 3.231378] bus: 'usb': add driver usbhid [ 3.231389] bus: 'usb': driver_probe_device: matched device 2-3:1.0 with driver usbhid [ 3.231392] bus: 'usb': really_probe: probing driver usbhid with device 2-3:1.0 [ 3.231397] usbhid 2-3:1.0: no default pinctrl state [ 3.231402] devices_kset: Moving 2-3:1.0 to end of list [ 3.243757] device: '0003:0461:4DE2.0001': device_add [ 3.243769] bus: 'hid': add device 0003:0461:4DE2.0001 [ 3.243780] PM: Adding info for hid:0003:0461:4DE2.0001 [ 3.243809] bus: 'hid': driver_probe_device: matched device 0003:0461:4DE2.0001 with driver hid-generic [ 3.243811] bus: 'hid': really_probe: probing driver hid-generic with device 0003:0461:4DE2.0001 [ 3.243815] hid-generic 0003:0461:4DE2.0001: no default pinctrl state [ 3.243822] devices_kset: Moving 0003:0461:4DE2.0001 to end of list [ 3.243887] device: 'input3': device_add [ 3.243907] PM: Adding info for No Bus:input3 [ 3.243921] input: USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-3/2-3:1.0/0003:0461:4DE2.0001/input/input3 [ 3.243927] device: 'mouse0': device_add [ 3.243933] PM: Adding info for No Bus:mouse0 [ 3.244400] device: 'event1': device_add [ 3.244427] PM: Adding info for No Bus:event1 [ 3.244900] device: 'hidraw0': device_add [ 3.244921] PM: Adding info for No Bus:hidraw0 [ 3.245391] hid-generic 0003:0461:4DE2.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:10.0-3/input0 [ 3.245396] driver: 'hid-generic': driver_bound: bound to device '0003:0461:4DE2.0001' [ 3.245403] bus: 'hid': really_probe: bound device 0003:0461:4DE2.0001 to driver hid-generic [ 3.245414] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 3.245416] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 3.245423] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 3.245425] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 3.245428] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 3.245436] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 3.245518] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 3.245519] i2c i2c-SYNA2B36:00: Added to deferred list [ 3.245527] driver: 'usbhid': driver_bound: bound to device '2-3:1.0' [ 3.245530] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 3.245531] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 3.245532] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 3.245533] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 3.245534] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 3.245536] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 3.245560] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 3.245561] i2c i2c-SYNA2B36:00: Added to deferred list [ 3.245565] bus: 'usb': really_probe: bound device 2-3:1.0 to driver usbhid [ 3.245579] usbcore: registered new interface driver usbhid [ 3.245580] usbhid: USB HID core driver [ 3.496260] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 3.611483] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=0821 [ 3.611485] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.611486] usb 1-1.1: Product: Bluetooth Radio [ 3.611487] usb 1-1.1: Manufacturer: Realtek [ 3.611488] usb 1-1.1: SerialNumber: 00e04c000001 [ 3.611493] device: '1-1.1': device_add [ 3.611518] bus: 'usb': add device 1-1.1 [ 3.611539] PM: Adding info for usb:1-1.1 [ 3.611612] bus: 'usb': driver_probe_device: matched device 1-1.1 with driver usb [ 3.611614] bus: 'usb': really_probe: probing driver usb with device 1-1.1 [ 3.611618] usb 1-1.1: no default pinctrl state [ 3.611622] devices_kset: Moving 1-1.1 to end of list [ 3.612756] device: '1-1.1:1.0': device_add [ 3.612772] bus: 'usb': add device 1-1.1:1.0 [ 3.612780] PM: Adding info for usb:1-1.1:1.0 [ 3.613323] device: 'ep_81': device_add [ 3.613353] PM: Adding info for No Bus:ep_81 [ 3.613356] device: 'ep_02': device_add [ 3.613364] PM: Adding info for No Bus:ep_02 [ 3.613378] device: 'ep_82': device_add [ 3.613387] PM: Adding info for No Bus:ep_82 [ 3.613389] device: '1-1.1:1.1': device_add [ 3.613396] bus: 'usb': add device 1-1.1:1.1 [ 3.613401] PM: Adding info for usb:1-1.1:1.1 [ 3.614571] device: 'ep_03': device_add [ 3.614602] PM: Adding info for No Bus:ep_03 [ 3.614604] device: 'ep_83': device_add [ 3.614613] PM: Adding info for No Bus:ep_83 [ 3.614615] driver: 'usb': driver_bound: bound to device '1-1.1' [ 3.614631] bus: 'usb': really_probe: bound device 1-1.1 to driver usb [ 3.614642] device: 'ep_00': device_add [ 3.614651] PM: Adding info for No Bus:ep_00 [ 3.614673] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 3.614675] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 3.614681] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 3.614683] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 3.614687] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 3.614693] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 3.614778] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 3.614779] i2c i2c-SYNA2B36:00: Added to deferred list [ 3.696265] usb 1-1.2: new high-speed USB device number 4 using ehci-pci [ 3.828094] usb 1-1.2: New USB device found, idVendor=174f, idProduct=116a [ 3.828097] usb 1-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 3.828098] usb 1-1.2: Product: EasyCamera [ 3.828099] usb 1-1.2: Manufacturer: 201607290001 [ 3.828100] usb 1-1.2: SerialNumber: 200901010001 [ 3.828116] device: '1-1.2': device_add [ 3.828161] bus: 'usb': add device 1-1.2 [ 3.828172] PM: Adding info for usb:1-1.2 [ 3.828253] bus: 'usb': driver_probe_device: matched device 1-1.2 with driver usb [ 3.828256] bus: 'usb': really_probe: probing driver usb with device 1-1.2 [ 3.828260] usb 1-1.2: no default pinctrl state [ 3.828265] devices_kset: Moving 1-1.2 to end of list [ 3.829969] device: '1-1.2:1.0': device_add [ 3.829988] bus: 'usb': add device 1-1.2:1.0 [ 3.829996] PM: Adding info for usb:1-1.2:1.0 [ 3.830792] device: 'ep_83': device_add [ 3.830826] PM: Adding info for No Bus:ep_83 [ 3.830828] device: '1-1.2:1.1': device_add [ 3.830849] bus: 'usb': add device 1-1.2:1.1 [ 3.830858] PM: Adding info for usb:1-1.2:1.1 [ 3.830869] driver: 'usb': driver_bound: bound to device '1-1.2' [ 3.830873] bus: 'usb': really_probe: bound device 1-1.2 to driver usb [ 3.830883] device: 'ep_00': device_add [ 3.830891] PM: Adding info for No Bus:ep_00 [ 3.830897] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 3.830899] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 3.830911] i2c_designware AMD0010:00: Standard-mode HCNT:LCNT = 569:664 [ 3.830913] i2c_designware AMD0010:00: Fast-mode HCNT:LCNT = 117:212 [ 3.830922] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 3.830923] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 3.830930] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 3.830936] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 3.831020] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 3.831021] i2c i2c-SYNA2B36:00: Added to deferred list [ 4.108269] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.529182] ata1.00: ATA-10: ST1000LM035-1RK172, LVM1, max UDMA/133 [ 4.529185] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.579302] ata1.00: configured for UDMA/133 [ 4.580095] scsi 0:0:0:0: Direct-Access ATA ST1000LM035-1RK1 LVM1 PQ: 0 ANSI: 5 [ 4.608343] device: 'target0:0:0': device_add [ 4.608357] bus: 'scsi': add device target0:0:0 [ 4.608404] PM: Adding info for scsi:target0:0:0 [ 4.608468] device: '0:0:0:0': device_add [ 4.608504] bus: 'scsi': add device 0:0:0:0 [ 4.608511] PM: Adding info for scsi:0:0:0:0 [ 4.608529] device: '0:0:0:0': device_add [ 4.608540] PM: Adding info for No Bus:0:0:0:0 [ 4.608549] device: '0:0:0:0': device_add [ 4.608558] PM: Adding info for No Bus:0:0:0:0 [ 4.617396] scsi 1:0:0:0: CD-ROM PLDS DVD-RW DA8AESH XL6M PQ: 0 ANSI: 5 [ 4.635579] device: 'target1:0:0': device_add [ 4.635626] bus: 'scsi': add device target1:0:0 [ 4.635641] PM: Adding info for scsi:target1:0:0 [ 4.635671] device: '1:0:0:0': device_add [ 4.635691] bus: 'scsi': add device 1:0:0:0 [ 4.635697] PM: Adding info for scsi:1:0:0:0 [ 4.635702] device: '1:0:0:0': device_add [ 4.635714] PM: Adding info for No Bus:1:0:0:0 [ 4.635723] device: '1:0:0:0': device_add [ 4.635731] PM: Adding info for No Bus:1:0:0:0 [ 4.639071] device class 'scsi_disk': registering [ 4.639084] bus: 'scsi': add driver sd [ 4.639093] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver sd [ 4.639097] bus: 'scsi': really_probe: probing driver sd with device 0:0:0:0 [ 4.639103] sd 0:0:0:0: no default pinctrl state [ 4.639109] devices_kset: Moving 0:0:0:0 to end of list [ 4.639124] device: '0:0:0:0': device_add [ 4.639146] PM: Adding info for No Bus:0:0:0:0 [ 4.639165] driver: 'sd': driver_bound: bound to device '0:0:0:0' [ 4.639171] bus: 'scsi': really_probe: bound device 0:0:0:0 to driver sd [ 4.639174] bus: 'scsi': driver_probe_device: matched device 1:0:0:0 with driver sd [ 4.639176] bus: 'scsi': really_probe: probing driver sd with device 1:0:0:0 [ 4.639178] sd 1:0:0:0: no default pinctrl state [ 4.639182] devices_kset: Moving 1:0:0:0 to end of list [ 4.639186] sd: probe of 1:0:0:0 rejects match -19 [ 4.639204] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 4.639206] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 4.639215] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 4.639216] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 4.639218] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 4.639222] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 4.639325] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 4.639327] i2c i2c-SYNA2B36:00: Added to deferred list [ 4.639327] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 4.639329] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 4.639349] sd 0:0:0:0: [sda] Write Protect is off [ 4.639350] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.639374] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.639425] device: '8:0': device_add [ 4.639443] PM: Adding info for No Bus:8:0 [ 4.639461] device: 'sda': device_add [ 4.639489] PM: Adding info for No Bus:sda [ 4.639536] bus: 'scsi': add driver sr [ 4.639546] bus: 'scsi': driver_probe_device: matched device 1:0:0:0 with driver sr [ 4.639549] bus: 'scsi': really_probe: probing driver sr with device 1:0:0:0 [ 4.639555] sr 1:0:0:0: no default pinctrl state [ 4.639560] devices_kset: Moving 1:0:0:0 to end of list [ 4.667599] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 4.667602] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.667611] device: '11:0': device_add [ 4.667636] PM: Adding info for No Bus:11:0 [ 4.667701] device: 'sr0': device_add [ 4.667728] PM: Adding info for No Bus:sr0 [ 4.668154] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.668158] driver: 'sr': driver_bound: bound to device '1:0:0:0' [ 4.668163] bus: 'scsi': really_probe: bound device 1:0:0:0 to driver sr [ 4.668354] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 4.668356] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 4.668364] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 4.668367] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 4.668371] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 4.668380] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 4.668473] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 4.668474] i2c i2c-SYNA2B36:00: Added to deferred list [ 4.700255] sda: sda1 sda2 sda3 [ 4.700274] device: 'sda1': device_add [ 4.700304] PM: Adding info for No Bus:sda1 [ 4.700797] device: 'sda2': device_add [ 4.700823] PM: Adding info for No Bus:sda2 [ 4.701266] device: 'sda3': device_add [ 4.701291] PM: Adding info for No Bus:sda3 [ 4.702693] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.170879] PM: Starting manual resume from disk [ 5.170883] PM: Hibernation image partition 8:3 present [ 5.170884] PM: Looking for hibernation image. [ 5.171540] PM: Image not found (code -22) [ 5.171542] PM: Hibernation image not present or could not be loaded. [ 5.374746] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 6.990742] random: crng init done [ 7.016249] device: 'autofs': device_add [ 7.016264] PM: Adding info for No Bus:autofs [ 7.100361] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.392649] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) [ 7.392805] systemd[1]: Detected architecture x86-64. [ 7.425063] systemd[1]: Set hostname to . [ 8.597276] systemd[1]: Reached target Remote File Systems. [ 8.597502] systemd[1]: Listening on Journal Socket. [ 8.597665] systemd[1]: Created slice User and Session Slice. [ 8.597705] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.597750] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 8.597779] systemd[1]: Listening on udev Kernel Socket. [ 8.597907] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 9.184984] device: 'vcs2': device_add [ 9.185005] PM: Adding info for No Bus:vcs2 [ 9.185053] device: 'vcsa2': device_add [ 9.185063] PM: Adding info for No Bus:vcsa2 [ 9.185947] device: 'vcs3': device_add [ 9.185967] PM: Adding info for No Bus:vcs3 [ 9.186034] device: 'vcsa3': device_add [ 9.186047] PM: Adding info for No Bus:vcsa3 [ 9.186875] device: 'vcs4': device_add [ 9.186901] PM: Adding info for No Bus:vcs4 [ 9.186954] device: 'vcsa4': device_add [ 9.186972] PM: Adding info for No Bus:vcsa4 [ 9.188232] device: 'vcs5': device_add [ 9.188254] PM: Adding info for No Bus:vcs5 [ 9.188307] device: 'vcsa5': device_add [ 9.188320] PM: Adding info for No Bus:vcsa5 [ 9.189750] device: 'vcs6': device_add [ 9.189772] PM: Adding info for No Bus:vcs6 [ 9.189825] device: 'vcsa6': device_add [ 9.189836] PM: Adding info for No Bus:vcsa6 [ 9.248122] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 9.421997] systemd-journald[204]: Received request to flush runtime journal from PID 1 [ 10.126158] acpi_cpufreq: overriding BIOS provided _PSD data [ 10.284873] bus: 'acpi': add driver tpm_crb [ 10.330668] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 10.330678] bus: 'platform': add driver SP5100 TCO timer [ 10.330715] Registering platform device 'SP5100 TCO timer'. Parent at platform [ 10.330718] device: 'SP5100 TCO timer': device_add [ 10.330726] bus: 'platform': add device SP5100 TCO timer [ 10.330742] PM: Adding info for platform:SP5100 TCO timer [ 10.330764] bus: 'platform': driver_probe_device: matched device SP5100 TCO timer with driver SP5100 TCO timer [ 10.330768] bus: 'platform': really_probe: probing driver SP5100 TCO timer with device SP5100 TCO timer [ 10.330774] SP5100 TCO timer SP5100 TCO timer: no default pinctrl state [ 10.330781] devices_kset: Moving SP5100 TCO timer to end of list [ 10.330797] sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x790b, Revision ID: 0x4a [ 10.330820] sp5100_tco: failed to find MMIO address, giving up. [ 10.330829] SP5100 TCO timer: probe of SP5100 TCO timer rejects match -19 [ 10.423114] device class 'sound': registering [ 10.436583] bus: 'acpi': add driver ac [ 10.436604] bus: 'acpi': driver_probe_device: matched device ACPI0003:00 with driver ac [ 10.436608] bus: 'acpi': really_probe: probing driver ac with device ACPI0003:00 [ 10.436613] ac ACPI0003:00: no default pinctrl state [ 10.436620] devices_kset: Moving ACPI0003:00 to end of list [ 10.441355] device: 'ADP0': device_add [ 10.441390] PM: Adding info for No Bus:ADP0 [ 10.441401] device: 'ADP0': dev_uevent: class uevent() returned -11 [ 10.441410] ACPI: AC Adapter [ADP0] (on-line) [ 10.441417] driver: 'ac': driver_bound: bound to device 'ACPI0003:00' [ 10.441423] bus: 'acpi': really_probe: bound device ACPI0003:00 to driver ac [ 10.441443] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 10.441446] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 10.441461] i2c_designware AMD0010:00: Standard-mode HCNT:LCNT = 569:664 [ 10.441464] i2c_designware AMD0010:00: Fast-mode HCNT:LCNT = 117:212 [ 10.441475] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 10.441477] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 10.441481] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 10.441489] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 10.441577] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 10.441579] i2c i2c-SYNA2B36:00: Added to deferred list [ 10.448565] bus: 'acpi': add driver button [ 10.448578] bus: 'acpi': driver_probe_device: matched device PNP0C0C:00 with driver button [ 10.448581] bus: 'acpi': really_probe: probing driver button with device PNP0C0C:00 [ 10.448587] button PNP0C0C:00: no default pinctrl state [ 10.448602] devices_kset: Moving PNP0C0C:00 to end of list [ 10.448609] device: 'input4': device_add [ 10.448702] PM: Adding info for No Bus:input4 [ 10.448717] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 10.448725] device: 'event2': device_add [ 10.448755] PM: Adding info for No Bus:event2 [ 10.448831] ACPI: Power Button [PWRB] [ 10.448838] driver: 'button': driver_bound: bound to device 'PNP0C0C:00' [ 10.448843] bus: 'acpi': really_probe: bound device PNP0C0C:00 to driver button [ 10.448876] bus: 'acpi': driver_probe_device: matched device PNP0C0D:00 with driver button [ 10.448878] bus: 'acpi': really_probe: probing driver button with device PNP0C0D:00 [ 10.448882] button PNP0C0D:00: no default pinctrl state [ 10.448894] devices_kset: Moving PNP0C0D:00 to end of list [ 10.448962] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 10.448964] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 10.448971] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 10.448972] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 10.448974] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 10.448979] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 10.449533] device: 'input5': device_add [ 10.449541] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 10.449542] i2c i2c-SYNA2B36:00: Added to deferred list [ 10.449620] PM: Adding info for No Bus:input5 [ 10.449636] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5 [ 10.449642] device: 'event3': device_add [ 10.449658] PM: Adding info for No Bus:event3 [ 10.450163] ACPI: Lid Switch [LID] [ 10.450172] driver: 'button': driver_bound: bound to device 'PNP0C0D:00' [ 10.450180] bus: 'acpi': really_probe: bound device PNP0C0D:00 to driver button [ 10.450201] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 10.450205] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 10.450214] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 10.450217] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 10.450222] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 10.450232] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 10.450331] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 10.450333] i2c i2c-SYNA2B36:00: Added to deferred list [ 10.450343] bus: 'acpi': driver_probe_device: matched device LNXPWRBN:00 with driver button [ 10.450345] bus: 'acpi': really_probe: probing driver button with device LNXPWRBN:00 [ 10.450348] button LNXPWRBN:00: no default pinctrl state [ 10.450353] devices_kset: Moving LNXPWRBN:00 to end of list [ 10.450362] device: 'input6': device_add [ 10.450400] PM: Adding info for No Bus:input6 [ 10.450426] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 10.450435] device: 'event4': device_add [ 10.450448] PM: Adding info for No Bus:event4 [ 10.450523] ACPI: Power Button [PWRF] [ 10.450533] driver: 'button': driver_bound: bound to device 'LNXPWRBN:00' [ 10.450536] bus: 'acpi': really_probe: bound device LNXPWRBN:00 to driver button [ 10.450541] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 10.450543] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 10.450547] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 10.450549] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 10.450552] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 10.450556] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 10.450616] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 10.450618] i2c i2c-SYNA2B36:00: Added to deferred list [ 10.489919] bus: 'pci': add driver shpchp [ 10.489947] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.551947] device class 'scsi_generic': registering [ 10.551976] device: 'sg0': device_add [ 10.551997] PM: Adding info for No Bus:sg0 [ 10.552090] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 10.552098] device: 'sg1': device_add [ 10.552115] PM: Adding info for No Bus:sg1 [ 10.552148] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 10.590788] bus: 'acpi': add driver video [ 10.590803] bus: 'acpi': driver_probe_device: matched device LNXVIDEO:00 with driver video [ 10.590806] bus: 'acpi': really_probe: probing driver video with device LNXVIDEO:00 [ 10.590811] video LNXVIDEO:00: no default pinctrl state [ 10.590817] devices_kset: Moving LNXVIDEO:00 to end of list [ 10.590849] video: probe of LNXVIDEO:00 rejects match -19 [ 10.590873] bus: 'acpi': driver_probe_device: matched device LNXVIDEO:01 with driver video [ 10.590875] bus: 'acpi': really_probe: probing driver video with device LNXVIDEO:01 [ 10.590876] video LNXVIDEO:01: no default pinctrl state [ 10.590879] devices_kset: Moving LNXVIDEO:01 to end of list [ 10.590962] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no) [ 10.591314] device: 'acpi_video0': device_add [ 10.591337] PM: Adding info for No Bus:acpi_video0 [ 10.591348] device: 'cooling_device4': device_add [ 10.591358] PM: Adding info for No Bus:cooling_device4 [ 10.591365] acpi device:33: registered as cooling_device4 [ 10.591387] device: 'input7': device_add [ 10.591411] PM: Adding info for No Bus:input7 [ 10.591425] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7 [ 10.591433] device: 'event5': device_add [ 10.591444] PM: Adding info for No Bus:event5 [ 10.591510] driver: 'video': driver_bound: bound to device 'LNXVIDEO:01' [ 10.591516] bus: 'acpi': really_probe: bound device LNXVIDEO:01 to driver video [ 10.591529] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 10.591531] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 10.591538] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 10.591539] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 10.591542] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 10.591546] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 10.591595] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 10.591596] i2c i2c-SYNA2B36:00: Added to deferred list [ 10.609980] bus: 'acpi': add driver battery [ 10.610009] bus: 'acpi': driver_probe_device: matched device PNP0C0A:00 with driver battery [ 10.610014] bus: 'acpi': really_probe: probing driver battery with device PNP0C0A:00 [ 10.610021] battery PNP0C0A:00: no default pinctrl state [ 10.610028] devices_kset: Moving PNP0C0A:00 to end of list [ 10.665081] bus: 'pci': add driver k10temp [ 10.665098] bus: 'pci': driver_probe_device: matched device 0000:00:18.3 with driver k10temp [ 10.665102] bus: 'pci': really_probe: probing driver k10temp with device 0000:00:18.3 [ 10.665107] k10temp 0000:00:18.3: no default pinctrl state [ 10.665114] devices_kset: Moving 0000:00:18.3 to end of list [ 10.665122] device: 'hwmon0': device_add [ 10.665146] PM: Adding info for No Bus:hwmon0 [ 10.665153] driver: 'k10temp': driver_bound: bound to device '0000:00:18.3' [ 10.665166] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 10.665168] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 10.665176] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 10.665177] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 10.665179] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 10.665184] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 10.665280] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 10.665281] i2c i2c-SYNA2B36:00: Added to deferred list [ 10.665290] bus: 'pci': really_probe: bound device 0000:00:18.3 to driver k10temp [ 10.674993] device: 'timer': device_add [ 10.675014] PM: Adding info for No Bus:timer [ 10.728635] device: 'BAT0': device_add [ 10.728679] PM: Adding info for No Bus:BAT0 [ 10.728692] device: 'BAT0': dev_uevent: class uevent() returned -11 [ 10.728706] ACPI: Battery Slot [BAT0] (battery present) [ 10.728723] driver: 'battery': driver_bound: bound to device 'PNP0C0A:00' [ 10.728730] bus: 'acpi': really_probe: bound device PNP0C0A:00 to driver battery [ 10.728754] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 10.728757] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 10.728767] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 10.728770] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 10.728777] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 10.728789] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 10.728893] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 10.728896] i2c i2c-SYNA2B36:00: Added to deferred list [ 10.764331] EFI Variables Facility v0.08 2004-May-17 [ 10.787042] device class 'wmi_bus': registering [ 10.787062] bus: 'wmi': registered [ 10.787069] bus: 'platform': add driver acpi-wmi [ 10.787086] bus: 'platform': driver_probe_device: matched device PNP0C14:00 with driver acpi-wmi [ 10.787090] bus: 'platform': really_probe: probing driver acpi-wmi with device PNP0C14:00 [ 10.787095] acpi-wmi PNP0C14:00: no default pinctrl state [ 10.787102] devices_kset: Moving PNP0C14:00 to end of list [ 10.787127] device: 'wmi_bus-PNP0C14:00': device_add [ 10.787143] PM: Adding info for No Bus:wmi_bus-PNP0C14:00 [ 10.787168] device: 'C3A03776-51AC-49AA-AD0F-F2F7D62C3F3C': device_add [ 10.787172] bus: 'wmi': add device C3A03776-51AC-49AA-AD0F-F2F7D62C3F3C [ 10.787183] PM: Adding info for wmi:C3A03776-51AC-49AA-AD0F-F2F7D62C3F3C [ 10.787191] device: '05901221-D566-11D1-B2F0-00A0C9062910': device_add [ 10.787195] bus: 'wmi': add device 05901221-D566-11D1-B2F0-00A0C9062910 [ 10.787203] PM: Adding info for wmi:05901221-D566-11D1-B2F0-00A0C9062910 [ 10.787209] driver: 'acpi-wmi': driver_bound: bound to device 'PNP0C14:00' [ 10.787224] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 10.787226] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 10.787233] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 10.787234] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 10.787236] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 10.787240] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 10.787325] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 10.787326] i2c i2c-SYNA2B36:00: Added to deferred list [ 10.787336] bus: 'platform': really_probe: bound device PNP0C14:00 to driver acpi-wmi [ 10.813794] bus: 'pci': add driver fam15h_power [ 10.813812] bus: 'pci': driver_probe_device: matched device 0000:00:18.4 with driver fam15h_power [ 10.813815] bus: 'pci': really_probe: probing driver fam15h_power with device 0000:00:18.4 [ 10.813820] fam15h_power 0000:00:18.4: no default pinctrl state [ 10.813828] devices_kset: Moving 0000:00:18.4 to end of list [ 10.813845] device: 'hwmon1': device_add [ 10.813866] PM: Adding info for No Bus:hwmon1 [ 10.813874] driver: 'fam15h_power': driver_bound: bound to device '0000:00:18.4' [ 10.813885] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 10.813887] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 10.813895] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 10.813896] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 10.813898] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 10.813902] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 10.813997] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 10.813998] i2c i2c-SYNA2B36:00: Added to deferred list [ 10.814009] bus: 'pci': really_probe: bound device 0000:00:18.4 to driver fam15h_power [ 10.851930] pstore: using zlib compression [ 10.868111] pstore: Registered efi as persistent store backend [ 10.952217] device class 'rfkill': registering [ 10.952230] device: 'rfkill': device_add [ 10.952247] PM: Adding info for No Bus:rfkill [ 11.136464] device class 'drm': registering [ 11.173543] bus: 'platform': add driver pcspkr [ 11.173561] bus: 'platform': driver_probe_device: matched device pcspkr with driver pcspkr [ 11.173566] bus: 'platform': really_probe: probing driver pcspkr with device pcspkr [ 11.173572] pcspkr pcspkr: no default pinctrl state [ 11.173581] devices_kset: Moving pcspkr to end of list [ 11.173589] device: 'input8': device_add [ 11.173630] PM: Adding info for No Bus:input8 [ 11.173653] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 11.173664] device: 'event6': device_add [ 11.173681] PM: Adding info for No Bus:event6 [ 11.173783] device: 'card1': device_add [ 11.173805] PM: Adding info for No Bus:card1 [ 11.173815] device: 'controlC1': device_add [ 11.173833] PM: Adding info for No Bus:controlC1 [ 11.173876] device: 'pcmC1D0p': device_add [ 11.173893] PM: Adding info for No Bus:pcmC1D0p [ 11.173940] driver: 'pcspkr': driver_bound: bound to device 'pcspkr' [ 11.173952] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 11.173955] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 11.173965] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 11.173967] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 11.173971] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 11.173978] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 11.174116] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 11.174118] i2c i2c-SYNA2B36:00: Added to deferred list [ 11.174131] bus: 'platform': really_probe: bound device pcspkr to driver pcspkr [ 11.389167] bus: 'hdaudio': registered [ 11.419483] bus: 'platform': add driver ideapad_acpi [ 11.419501] bus: 'platform': driver_probe_device: matched device VPC2004:00 with driver ideapad_acpi [ 11.419505] bus: 'platform': really_probe: probing driver ideapad_acpi with device VPC2004:00 [ 11.419511] ideapad_acpi VPC2004:00: no default pinctrl state [ 11.419519] devices_kset: Moving VPC2004:00 to end of list [ 11.423511] device: 'input9': device_add [ 11.423558] PM: Adding info for No Bus:input9 [ 11.423593] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:14.3/PNP0C09:00/VPC2004:00/input/input9 [ 11.423602] device: 'event7': device_add [ 11.423616] PM: Adding info for No Bus:event7 [ 11.452579] device: 'rfkill0': device_add [ 11.452614] PM: Adding info for No Bus:rfkill0 [ 11.476473] device: 'rfkill1': device_add [ 11.476511] PM: Adding info for No Bus:rfkill1 [ 11.485508] driver: 'ideapad_acpi': driver_bound: bound to device 'VPC2004:00' [ 11.485517] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 11.485521] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 11.485531] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 11.485534] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 11.485540] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 11.485552] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 11.485636] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 11.485637] i2c i2c-SYNA2B36:00: Added to deferred list [ 11.485649] bus: 'platform': really_probe: bound device VPC2004:00 to driver ideapad_acpi [ 11.691556] device class 'ieee80211': registering [ 11.691650] Registering platform device 'regulatory.0'. Parent at platform [ 11.691653] device: 'regulatory.0': device_add [ 11.691662] bus: 'platform': add device regulatory.0 [ 11.691680] PM: Adding info for platform:regulatory.0 [ 11.745392] device: 'ttm': device_add [ 11.745419] PM: Adding info for No Bus:ttm [ 12.396198] AVX2 version of gcm_enc/dec engaged. [ 12.396200] AES CTR mode by8 optimization enabled [ 12.524445] bus: 'pci': add driver snd_hda_intel [ 12.524456] bus: 'pci': driver_probe_device: matched device 0000:00:01.1 with driver snd_hda_intel [ 12.524459] bus: 'pci': really_probe: probing driver snd_hda_intel with device 0000:00:01.1 [ 12.524464] snd_hda_intel 0000:00:01.1: no default pinctrl state [ 12.524471] devices_kset: Moving 0000:00:01.1 to end of list [ 12.524488] snd_hda_intel 0000:00:01.1: enabling device (0000 -> 0002) [ 12.524756] snd_hda_intel 0000:00:01.1: Force to non-snoop mode [ 12.524979] driver: 'snd_hda_intel': driver_bound: bound to device '0000:00:01.1' [ 12.524987] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 12.524989] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 12.525001] i2c_designware AMD0010:00: Standard-mode HCNT:LCNT = 569:664 [ 12.525003] i2c_designware AMD0010:00: Fast-mode HCNT:LCNT = 117:212 [ 12.525013] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 12.525014] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 12.525017] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 12.525022] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 12.525087] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 12.525089] i2c i2c-SYNA2B36:00: Added to deferred list [ 12.525098] bus: 'pci': really_probe: bound device 0000:00:01.1 to driver snd_hda_intel [ 12.525103] bus: 'pci': driver_probe_device: matched device 0000:00:09.2 with driver snd_hda_intel [ 12.525105] bus: 'pci': really_probe: probing driver snd_hda_intel with device 0000:00:09.2 [ 12.525106] snd_hda_intel 0000:00:09.2: no default pinctrl state [ 12.525111] devices_kset: Moving 0000:00:09.2 to end of list [ 12.525121] snd_hda_intel 0000:00:09.2: enabling device (0004 -> 0006) [ 12.525369] driver: 'snd_hda_intel': driver_bound: bound to device '0000:00:09.2' [ 12.525382] bus: 'pci': really_probe: bound device 0000:00:09.2 to driver snd_hda_intel [ 12.525459] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 12.525461] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 12.525466] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 12.525467] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 12.525469] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 12.525474] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 12.525527] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 12.525528] i2c i2c-SYNA2B36:00: Added to deferred list [ 12.528422] device: 'hdaudioC0D0': device_add [ 12.528440] bus: 'hdaudio': add device hdaudioC0D0 [ 12.528451] PM: Adding info for hdaudio:hdaudioC0D0 [ 12.532739] device: 'hdaudioC2D0': device_add [ 12.532753] bus: 'hdaudio': add device hdaudioC2D0 [ 12.532766] PM: Adding info for hdaudio:hdaudioC2D0 [ 12.535455] alg: No test for pcbc(aes) (pcbc-aes-aesni) [ 12.716503] Bluetooth: Core ver 2.22 [ 12.716520] device class 'bluetooth': registering [ 12.716532] NET: Registered protocol family 31 [ 12.716534] Bluetooth: HCI device and connection manager initialized [ 12.716539] Bluetooth: HCI socket layer initialized [ 12.716542] Bluetooth: L2CAP socket layer initialized [ 12.716551] Bluetooth: SCO socket layer initialized [ 12.785855] bus: 'hdaudio': add driver snd_hda_codec_hdmi [ 12.785868] bus: 'hdaudio': driver_probe_device: matched device hdaudioC0D0 with driver snd_hda_codec_hdmi [ 12.785873] bus: 'hdaudio': really_probe: probing driver snd_hda_codec_hdmi with device hdaudioC0D0 [ 12.785879] snd_hda_codec_hdmi hdaudioC0D0: no default pinctrl state [ 12.785887] devices_kset: Moving hdaudioC0D0 to end of list [ 12.786862] driver: 'snd_hda_codec_hdmi': driver_bound: bound to device 'hdaudioC0D0' [ 12.786876] bus: 'hdaudio': really_probe: bound device hdaudioC0D0 to driver snd_hda_codec_hdmi [ 12.787244] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 12.787248] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 12.787262] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 12.787265] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 12.787268] device: 'card0': device_add [ 12.787272] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 12.787286] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 12.787301] PM: Adding info for No Bus:card0 [ 12.787319] device: 'controlC0': device_add [ 12.787333] PM: Adding info for No Bus:controlC0 [ 12.787386] device: 'pcmC0D3p': device_add [ 12.787395] PM: Adding info for No Bus:pcmC0D3p [ 12.787421] device: 'hwC0D0': device_add [ 12.787437] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 12.787439] i2c i2c-SYNA2B36:00: Added to deferred list [ 12.787447] PM: Adding info for No Bus:hwC0D0 [ 12.787467] device: 'input10': device_add [ 12.787487] PM: Adding info for No Bus:input10 [ 12.787499] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10 [ 12.787506] device: 'event8': device_add [ 12.787516] PM: Adding info for No Bus:event8 [ 12.799879] bus: 'hdaudio': add driver snd_hda_codec_generic [ 12.799888] bus: 'hdaudio': driver_probe_device: matched device hdaudioC2D0 with driver snd_hda_codec_generic [ 12.799892] bus: 'hdaudio': really_probe: probing driver snd_hda_codec_generic with device hdaudioC2D0 [ 12.799897] snd_hda_codec_generic hdaudioC2D0: no default pinctrl state [ 12.799904] devices_kset: Moving hdaudioC2D0 to end of list [ 12.800236] snd_hda_codec_generic hdaudioC2D0: autoconfig for Generic: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 12.800238] snd_hda_codec_generic hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.800240] snd_hda_codec_generic hdaudioC2D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 12.800241] snd_hda_codec_generic hdaudioC2D0: mono: mono_out=0x0 [ 12.800242] snd_hda_codec_generic hdaudioC2D0: inputs: [ 12.800245] snd_hda_codec_generic hdaudioC2D0: Mic=0x19 [ 12.800246] snd_hda_codec_generic hdaudioC2D0: Internal Mic=0x12 [ 12.805919] driver: 'snd_hda_codec_generic': driver_bound: bound to device 'hdaudioC2D0' [ 12.805925] bus: 'hdaudio': really_probe: bound device hdaudioC2D0 to driver snd_hda_codec_generic [ 12.806255] device: 'card2': device_add [ 12.806283] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 12.806286] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 12.806291] PM: Adding info for No Bus:card2 [ 12.806296] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 12.806299] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 12.806304] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 12.806313] device: 'controlC2': device_add [ 12.806314] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 12.806334] PM: Adding info for No Bus:controlC2 [ 12.806434] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 12.806437] i2c i2c-SYNA2B36:00: Added to deferred list [ 12.806442] device: 'pcmC2D0p': device_add [ 12.806461] PM: Adding info for No Bus:pcmC2D0p [ 12.806511] device: 'pcmC2D0c': device_add [ 12.806529] PM: Adding info for No Bus:pcmC2D0c [ 12.806570] device: 'hwC2D0': device_add [ 12.806608] PM: Adding info for No Bus:hwC2D0 [ 12.806789] device: 'input11': device_add [ 12.806833] PM: Adding info for No Bus:input11 [ 12.806855] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:09.2/sound/card2/input11 [ 12.806865] device: 'event9': device_add [ 12.806882] PM: Adding info for No Bus:event9 [ 12.806930] device: 'input12': device_add [ 12.806979] PM: Adding info for No Bus:input12 [ 12.806997] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:09.2/sound/card2/input12 [ 12.807001] device: 'event10': device_add [ 12.807018] PM: Adding info for No Bus:event10 [ 13.299009] bus: 'usb': add driver btusb [ 13.299023] bus: 'usb': driver_probe_device: matched device 1-1.1:1.0 with driver btusb [ 13.299026] bus: 'usb': really_probe: probing driver btusb with device 1-1.1:1.0 [ 13.299031] btusb 1-1.1:1.0: no default pinctrl state [ 13.299037] devices_kset: Moving 1-1.1:1.0 to end of list [ 13.299052] driver: 'btusb': driver_bound: bound to device '1-1.1:1.1' [ 13.299066] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 13.299068] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 13.299075] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 13.299077] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 13.299078] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 13.299083] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 13.299176] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 13.299178] i2c i2c-SYNA2B36:00: Added to deferred list [ 13.299309] device: 'hci0': device_add [ 13.299323] PM: Adding info for No Bus:hci0 [ 13.299335] device: 'rfkill2': device_add [ 13.299350] PM: Adding info for No Bus:rfkill2 [ 13.299377] driver: 'btusb': driver_bound: bound to device '1-1.1:1.0' [ 13.299380] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 13.299382] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 13.299384] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 13.299386] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 13.299387] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 13.299391] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 13.299432] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 13.299433] i2c i2c-SYNA2B36:00: Added to deferred list [ 13.299438] bus: 'usb': really_probe: bound device 1-1.1:1.0 to driver btusb [ 13.299452] usbcore: registered new interface driver btusb [ 13.301049] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000a lmp_ver=06 lmp_subver=8821 [ 13.301055] Bluetooth: hci0: rtl: loading rtl_bt/rtl8821a_config.bin [ 13.301062] __allocate_fw_buf: fw-rtl_bt/rtl8821a_config.bin buf=ffff9c7af3ec60c0 [ 13.327925] bluetooth hci0: loading /lib/firmware/updates/4.13.2/rtl_bt/rtl8821a_config.bin failed with error -2 [ 13.327934] bluetooth hci0: loading /lib/firmware/updates/rtl_bt/rtl8821a_config.bin failed with error -2 [ 13.327944] bluetooth hci0: loading /lib/firmware/4.13.2/rtl_bt/rtl8821a_config.bin failed with error -2 [ 13.328519] bluetooth hci0: loading /lib/firmware/rtl_bt/rtl8821a_config.bin failed with error -2 [ 13.328524] bluetooth hci0: Direct firmware load for rtl_bt/rtl8821a_config.bin failed with error -2 [ 13.328528] __fw_free_buf: fw-rtl_bt/rtl8821a_config.bin buf=ffff9c7af3ec60c0 data= (null) size=0 [ 13.328532] Bluetooth: hci0: rtl: loading rtl_bt/rtl8821a_fw.bin [ 13.328536] __allocate_fw_buf: fw-rtl_bt/rtl8821a_fw.bin buf=ffff9c7af3ec60c0 [ 13.328546] bluetooth hci0: loading /lib/firmware/updates/4.13.2/rtl_bt/rtl8821a_fw.bin failed with error -2 [ 13.328550] bluetooth hci0: loading /lib/firmware/updates/rtl_bt/rtl8821a_fw.bin failed with error -2 [ 13.328553] bluetooth hci0: loading /lib/firmware/4.13.2/rtl_bt/rtl8821a_fw.bin failed with error -2 [ 13.338762] bluetooth hci0: direct-loading rtl_bt/rtl8821a_fw.bin [ 13.338770] fw_set_page_data: fw-rtl_bt/rtl8821a_fw.bin buf=ffff9c7af3ec60c0 data=ffffa81cc1375000 size=37420 [ 13.339849] Bluetooth: hci0: rom_version status=0 version=1 [ 13.339860] Bluetooth: cfg_sz 0, total size 17428 [ 13.717423] kvm: disabled by bios [ 13.765376] MCE: In-kernel MCE decoding enabled. [ 13.775072] EDAC amd64: Node 0: DRAM ECC disabled. [ 13.775076] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 13.804773] EDAC amd64: Node 0: DRAM ECC disabled. [ 13.804775] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 13.828603] EDAC amd64: Node 0: DRAM ECC disabled. [ 13.828606] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 14.114124] Adding 7749628k swap on /dev/sda3. Priority:-1 extents:1 across:7749628k FS [ 14.144775] __fw_free_buf: fw-rtl_bt/rtl8821a_fw.bin buf=ffff9c7af3ec60c0 data=ffffa81cc1375000 size=37420 [ 14.346500] bus: 'wmi': add driver wmi-bmof [ 14.346511] bus: 'wmi': driver_probe_device: matched device 05901221-D566-11D1-B2F0-00A0C9062910 with driver wmi-bmof [ 14.346516] bus: 'wmi': really_probe: probing driver wmi-bmof with device 05901221-D566-11D1-B2F0-00A0C9062910 [ 14.346522] wmi-bmof 05901221-D566-11D1-B2F0-00A0C9062910: no default pinctrl state [ 14.346528] devices_kset: Moving 05901221-D566-11D1-B2F0-00A0C9062910 to end of list [ 14.346557] driver: 'wmi-bmof': driver_bound: bound to device '05901221-D566-11D1-B2F0-00A0C9062910' [ 14.346565] bus: 'wmi': really_probe: bound device 05901221-D566-11D1-B2F0-00A0C9062910 to driver wmi-bmof [ 14.346577] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 14.346580] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 14.346594] i2c_designware AMD0010:00: Standard-mode HCNT:LCNT = 569:664 [ 14.346597] i2c_designware AMD0010:00: Fast-mode HCNT:LCNT = 117:212 [ 14.346607] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 14.346609] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 14.346612] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 14.346619] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 14.346730] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 14.346732] i2c i2c-SYNA2B36:00: Added to deferred list [ 14.893374] bus: 'pci': add driver rtl8821ae [ 14.893402] bus: 'pci': driver_probe_device: matched device 0000:01:00.0 with driver rtl8821ae [ 14.893408] bus: 'pci': really_probe: probing driver rtl8821ae with device 0000:01:00.0 [ 14.893417] rtl8821ae 0000:01:00.0: no default pinctrl state [ 14.893429] devices_kset: Moving 0000:01:00.0 to end of list [ 14.893785] rtl8821ae 0000:01:00.0: enabling device (0000 -> 0003) [ 14.981735] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_29.bin [ 14.981752] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_wowlan.bin [ 14.981766] __allocate_fw_buf: fw-rtlwifi/rtl8821aefw_29.bin buf=ffff9c7af14e5b40 [ 14.981786] rtl8821ae 0000:01:00.0: loading /lib/firmware/updates/4.13.2/rtlwifi/rtl8821aefw_29.bin failed with error -2 [ 14.981791] rtl8821ae 0000:01:00.0: loading /lib/firmware/updates/rtlwifi/rtl8821aefw_29.bin failed with error -2 [ 14.981796] rtl8821ae 0000:01:00.0: loading /lib/firmware/4.13.2/rtlwifi/rtl8821aefw_29.bin failed with error -2 [ 14.982411] __allocate_fw_buf: fw-rtlwifi/rtl8821aefw_wowlan.bin buf=ffff9c7af14e5300 [ 14.982417] rtl8821ae 0000:01:00.0: loading /lib/firmware/updates/4.13.2/rtlwifi/rtl8821aefw_wowlan.bin failed with error -2 [ 14.982421] rtl8821ae 0000:01:00.0: loading /lib/firmware/updates/rtlwifi/rtl8821aefw_wowlan.bin failed with error -2 [ 14.982425] rtl8821ae 0000:01:00.0: loading /lib/firmware/4.13.2/rtlwifi/rtl8821aefw_wowlan.bin failed with error -2 [ 14.984233] device: 'phy0': device_add [ 14.984304] PM: Adding info for No Bus:phy0 [ 14.984409] device: 'rfkill3': device_add [ 14.984437] PM: Adding info for No Bus:rfkill3 [ 15.324431] rtl8821ae 0000:01:00.0: direct-loading rtlwifi/rtl8821aefw_29.bin [ 15.324446] fw_set_page_data: fw-rtlwifi/rtl8821aefw_29.bin buf=ffff9c7af14e5b40 data=ffffa81cc13ed000 size=28348 [ 15.324462] __fw_free_buf: fw-rtlwifi/rtl8821aefw_29.bin buf=ffff9c7af14e5b40 data=ffffa81cc13ed000 size=28348 [ 15.324501] rtl8821ae 0000:01:00.0: direct-loading rtlwifi/rtl8821aefw_wowlan.bin [ 15.324505] fw_set_page_data: fw-rtlwifi/rtl8821aefw_wowlan.bin buf=ffff9c7af14e5300 data=ffffa81cc12d5000 size=19858 [ 15.324513] __fw_free_buf: fw-rtlwifi/rtl8821aefw_wowlan.bin buf=ffff9c7af14e5300 data=ffffa81cc12d5000 size=19858 [ 15.354498] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 15.354555] device: 'wlan0': device_add [ 15.354639] PM: Adding info for No Bus:wlan0 [ 15.355274] rtlwifi: rtlwifi: wireless switch is on [ 15.356446] driver: 'rtl8821ae': driver_bound: bound to device '0000:01:00.0' [ 15.356456] PM: Moving i2c:i2c-SYNA2B36:00 to end of list [ 15.356459] i2c i2c-SYNA2B36:00: Retrying from deferred list [ 15.356472] bus: 'i2c': driver_probe_device: matched device i2c-SYNA2B36:00 with driver i2c_hid [ 15.356476] bus: 'i2c': really_probe: probing driver i2c_hid with device i2c-SYNA2B36:00 [ 15.356481] i2c_hid i2c-SYNA2B36:00: no default pinctrl state [ 15.356492] devices_kset: Moving i2c-SYNA2B36:00 to end of list [ 15.356632] i2c i2c-SYNA2B36:00: Driver i2c_hid requests probe deferral [ 15.356635] i2c i2c-SYNA2B36:00: Added to deferred list [ 15.356649] bus: 'pci': really_probe: bound device 0000:01:00.0 to driver rtl8821ae [ 15.614172] rtl8821ae 0000:01:00.0 wlp1s0: renamed from wlan0 [ 15.614179] net wlan0: renaming to wlp1s0 [ 15.656485] [drm:amdgpu_init [amdgpu]] *ERROR* VGACON disables amdgpu kernel modesetting. [ 20.147189] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.147192] Bluetooth: BNEP filters: protocol multicast [ 20.147197] Bluetooth: BNEP socket layer initialized [ 20.202706] device: 'lo': device_add [ 20.202795] PM: Adding info for No Bus:lo [ 23.066206] device: 'vcs7': device_add [ 23.066240] PM: Adding info for No Bus:vcs7 [ 23.066444] device: 'vcsa7': device_add [ 23.066462] PM: Adding info for No Bus:vcsa7 [ 46.289595] device: 'lo': device_add [ 46.289681] PM: Adding info for No Bus:lo [ 50.548455] PM: Removing info for No Bus:lo [ 552.122194] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 556.378354] wlp1s0: authenticate with 54:13:79:fc:81:5c [ 556.381500] wlp1s0: send auth to 54:13:79:fc:81:5c (try 1/3) [ 556.384650] wlp1s0: authenticated [ 556.388658] wlp1s0: associate with 54:13:79:fc:81:5c (try 1/3) [ 556.393214] wlp1s0: RX AssocResp from 54:13:79:fc:81:5c (capab=0x1411 status=0 aid=3) [ 556.519177] wlp1s0: associated [ 556.519197] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready