Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.33.1-copy_dsdt (root@steve-LT2) (gcc version 4.4.3 20100127 (Red Hat 4.4.3-4) (GCC) ) #1 SMP Wed Mar 24 17:52:38 CDT 2010 Command line: ro root=/dev/mapper/vg_stevelt2-lv_root LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb 3 rdblacklist=nouveau acpi=copy_dsdt BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d000 (usable) BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bbe82000 (usable) BIOS-e820: 00000000bbe82000 - 00000000bbebf000 (reserved) BIOS-e820: 00000000bbebf000 - 00000000bbf57000 (usable) BIOS-e820: 00000000bbf57000 - 00000000bbfbf000 (ACPI NVS) BIOS-e820: 00000000bbfbf000 - 00000000bbfe2000 (usable) BIOS-e820: 00000000bbfe2000 - 00000000bbfff000 (ACPI data) BIOS-e820: 00000000bbfff000 - 00000000bc000000 (usable) BIOS-e820: 00000000bc000000 - 00000000c0000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) NX (Execute Disable) protection: active DMI 2.6 present. No AGP bridge found last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-EFFFF write-through F0000-FFFFF write-combining MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 0FFE80000 mask FFFF80000 write-protect 2 base 0FFF00000 mask FFFF00000 write-protect 3 base 080000000 mask FC0000000 write-back 4 base 0BC000000 mask FFC000000 uncachable 5 base 100000000 mask FC0000000 write-back 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xbc000 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bc000000 0000000000 - 00bc000000 page 2M kernel direct mapping tables up to bc000000 @ 8000-c000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ a000-10000 RAMDISK: 37390000 - 37fef58d ACPI: RSDP 00000000000fe020 00024 (v02 TOSINV) ACPI: XSDT 00000000bbffe120 0007C (v01 TOSINV TOSINV00 00000001 01000013) ACPI: FACP 00000000bbffc000 000F4 (v04 TOSINV TOSINV00 00000001 MSFT 01000013) ACPI: DSDT 00000000bbfed000 0B81F (v02 TOSINV TOSINV00 00000001 MSFT 01000013) ACPI: FACS 00000000bbf6e000 00040 ACPI: ASF! 00000000bbffd000 000A5 (v32 TOSINV TOSINV00 00000001 MSFT 01000013) ACPI: HPET 00000000bbffb000 00038 (v01 TOSINV TOSINV00 00000001 MSFT 01000013) ACPI: APIC 00000000bbffa000 0008C (v02 TOSINV TOSINV00 00000001 MSFT 01000013) ACPI: MCFG 00000000bbff9000 0003C (v01 TOSINV TOSINV00 00000001 MSFT 01000013) ACPI: SLIC 00000000bbfec000 00176 (v01 TOSINV TOSINV00 00000001 MSFT 01000013) ACPI: BOOT 00000000bbfe9000 00028 (v01 TOSINV TOSINV00 00000001 MSFT 01000013) ACPI: SSDT 00000000bbfe6000 002EE (v01 INTEL SataAhci 00001000 INTL 20051117) ACPI: ASPT 00000000bbfe4000 00034 (v04 INTEL Calpella 00000001 MSFT 01000013) ACPI: WDAT 00000000bbfe3000 00224 (v01 INTEL Calpella 00000001 MSFT 01000013) ACPI: SSDT 00000000bbfe2000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-0000000140000000 Bootmem setup node 0 0000000000000000-0000000140000000 NODE_DATA [000000000000b000 - 0000000000020fff] bootmap [0000000000021000 - 0000000000048fff] pages 28 (9 early reservations) ==> bootmem [0000000000 - 0140000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 0001de9f08] TEXT DATA BSS ==> [0001000000 - 0001de9f08] #2 [0037390000 - 0037fef58d] RAMDISK ==> [0037390000 - 0037fef58d] #3 [000009d000 - 0000100000] BIOS reserved ==> [000009d000 - 0000100000] #4 [0001dea000 - 0001dea25e] BRK ==> [0001dea000 - 0001dea25e] #5 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000] #6 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] #7 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] #8 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001e00000-ffff8800055fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node early_node_map[6] active PFN ranges 0: 0x00000000 -> 0x0000009d 0: 0x00000100 -> 0x000bbe82 0: 0x000bbebf -> 0x000bbf57 0: 0x000bbfbf -> 0x000bbfe2 0: 0x000bbfff -> 0x000bc000 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1031899 DMA zone: 56 pages used for memmap DMA zone: 109 pages reserved DMA zone: 3832 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 751478 pages, LIFO batch:31 Normal zone: 3584 pages used for memmap Normal zone: 258560 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 8 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000bbe82000 - 00000000bbebf000 PM: Registered nosave memory: 00000000bbf57000 - 00000000bbfbf000 PM: Registered nosave memory: 00000000bbfe2000 - 00000000bbfff000 PM: Registered nosave memory: 00000000bc000000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 PM: Registered nosave memory: 00000000f4000000 - 00000000feb00000 PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000 PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000 PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffe80000 PM: Registered nosave memory: 00000000ffe80000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:30000000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 30 pages/cpu @ffff880005800000 s90584 r8192 d24104 u262144 pcpu-alloc: s90584 r8192 d24104 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Node order, mobility grouping on. Total pages: 1013870 Policy zone: Normal Kernel command line: ro root=/dev/mapper/vg_stevelt2-lv_root LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb 3 rdblacklist=nouveau acpi=copy_dsdt PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 3975924k/5242880k available (4425k kernel code, 1115284k absent, 151672k reserved, 7410k data, 940k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:472 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled allocated 41943040 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration using PIT Detected 1595.805 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.61 BogoMIPS (lpj=1595805) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 9 MCE banks CPU0: Thermal monitoring handled by SMI CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8 using mwait in idle threads. Performance Events: Nehalem/Corei7 events, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f ACPI: Core revision 20091214 ACPI: DSDT (00000000bbfed000 0x0B81F) is copied to ffff88013baa0000 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 22533 entries in 89 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05 Booting Node 0, Processors #1 CPU1: Thermal monitoring handled by SMI CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 #2 CPU2: Thermal monitoring handled by SMI CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 #3 CPU3: Thermal monitoring handled by SMI CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 #4 CPU4: Thermal monitoring handled by SMI CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 #5 CPU5: Thermal monitoring handled by SMI CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 #6 CPU6: Thermal monitoring handled by SMI CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 #7 Ok. CPU7: Thermal monitoring handled by SMI CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 Brought up 8 CPUs Total of 8 processors activated (25531.80 BogoMIPS). devtmpfs: initialized regulator: core version 0.5 Time: 17:20:07 Date: 03/31/10 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Power Resource [FN00] (on) ACPI: No dock devices found. \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 8 1f ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfeafffff] (ignored) pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:16.0: reg 10: [mem 0xdb106100-0xdb10610f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:16.0: PME# disabled pci 0000:00:1a.0: reg 10: [mem 0xdb105c00-0xdb105fff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xdb100000-0xdb103fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 10: [mem 0xdb105800-0xdb105bff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:00:1f.2: reg 10: [io 0x6048-0x604f] pci 0000:00:1f.2: reg 14: [io 0x6054-0x6057] pci 0000:00:1f.2: reg 18: [io 0x6040-0x6047] pci 0000:00:1f.2: reg 1c: [io 0x6050-0x6053] pci 0000:00:1f.2: reg 20: [io 0x6020-0x603f] pci 0000:00:1f.2: reg 24: [mem 0xdb105000-0xdb1057ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10: [mem 0xdb106000-0xdb1060ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x6000-0x601f] pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref] pci 0000:01:00.0: reg 24: [io 0x5000-0x507f] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref] pci 0000:01:00.1: reg 10: [mem 0xd3000000-0xd3003fff] pci 0000:00:03.0: PCI bridge to [bus 01-01] pci 0000:00:03.0: bridge window [io 0x5000-0x5fff] pci 0000:00:03.0: bridge window [mem 0xd2000000-0xd30fffff] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] pci 0000:02:00.0: reg 10: [io 0x4000-0x40ff] pci 0000:02:00.0: reg 18: [mem 0xd3110000-0xd3110fff 64bit pref] pci 0000:02:00.0: reg 20: [mem 0xd3100000-0xd310ffff 64bit pref] pci 0000:02:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.0: bridge window [mem 0xda100000-0xdb0fffff] pci 0000:00:1c.0: bridge window [mem 0xd3100000-0xd40fffff 64bit pref] pci 0000:03:00.0: reg 10: [io 0x3000-0x30ff] pci 0000:03:00.0: reg 14: [mem 0xd9100000-0xd9103fff] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.1: bridge window [mem 0xd9100000-0xda0fffff] pci 0000:00:1c.1: bridge window [mem 0xd4100000-0xd50fffff 64bit pref] pci 0000:04:00.0: reg 10: [mem 0xd8100a00-0xd8100aff] pci 0000:04:00.0: supports D1 D2 pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:04:00.1: reg 10: [mem 0xd8100900-0xd81009ff] pci 0000:04:00.1: supports D1 D2 pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:00.1: PME# disabled pci 0000:04:00.2: reg 10: [mem 0xd8100800-0xd81008ff] pci 0000:04:00.2: supports D1 D2 pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:00.2: PME# disabled pci 0000:04:00.3: reg 10: [mem 0xd8100000-0xd81007ff] pci 0000:04:00.3: supports D1 D2 pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:00.3: PME# disabled pci 0000:00:1c.3: PCI bridge to [bus 04-04] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.3: bridge window [mem 0xd8100000-0xd90fffff] pci 0000:00:1c.3: bridge window [mem 0xd5100000-0xd60fffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 20-22] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.4: bridge window [mem 0xd7100000-0xd80fffff] pci 0000:00:1c.4: bridge window [mem 0xd6100000-0xd70fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT] \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 19 1f ACPI: PCI Root Bridge [CPBG] (0000:3f) pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *9 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default alloc irq_desc for 24 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 25 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 26 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 27 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 28 on node 0 alloc kstat_irqs on node 0 HPET: 8 timers in total, 5 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter hpet: hpet2 irq 24 for MSI hpet: hpet3 irq 25 for MSI hpet: hpet4 irq 26 for MSI hpet: hpet5 irq 27 for MSI hpet: hpet6 irq 28 for MSI Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:07: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.4 BAR 13 [io 0x1000-0x1fff] pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:07: [io 0x0680-0x069f] has been reserved system 00:07: [io 0x0800-0x080f] has been reserved system 00:07: [io 0x0810-0x0813] has been reserved system 00:07: [io 0xffff] has been reserved system 00:07: [io 0x0400-0x047f] has been reserved system 00:07: [io 0x0500-0x057f] has been reserved system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:09: [mem 0xfed1b000-0xfed1bfff] has been reserved system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:09: [mem 0xff000000-0xffffffff] could not be reserved system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved system 00:09: [mem 0xdb200000-0xdb200fff] has been reserved system 00:09: [mem 0xff800000-0xffffffff] could not be reserved pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref] pci 0000:00:03.0: PCI bridge to [bus 01-01] pci 0000:00:03.0: bridge window [io 0x5000-0x5fff] pci 0000:00:03.0: bridge window [mem 0xd2000000-0xd30fffff] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] pci 0000:02:00.0: BAR 6: assigned [mem 0xd3120000-0xd313ffff pref] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.0: bridge window [mem 0xda100000-0xdb0fffff] pci 0000:00:1c.0: bridge window [mem 0xd3100000-0xd40fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.1: bridge window [mem 0xd9100000-0xda0fffff] pci 0000:00:1c.1: bridge window [mem 0xd4100000-0xd50fffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 04-04] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.3: bridge window [mem 0xd8100000-0xd90fffff] pci 0000:00:1c.3: bridge window [mem 0xd5100000-0xd60fffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 20-22] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.4: bridge window [mem 0xd7100000-0xd80fffff] pci 0000:00:1c.4: bridge window [mem 0xd6100000-0xd70fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 05-05] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem disabled] pci 0000:00:1e.0: bridge window [mem pref disabled] alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:03.0: setting latency timer to 64 alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] pci_bus 0000:02: resource 1 [mem 0xda100000-0xdb0fffff] pci_bus 0000:02: resource 2 [mem 0xd3100000-0xd40fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] pci_bus 0000:03: resource 1 [mem 0xd9100000-0xda0fffff] pci_bus 0000:03: resource 2 [mem 0xd4100000-0xd50fffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] pci_bus 0000:04: resource 1 [mem 0xd8100000-0xd90fffff] pci_bus 0000:04: resource 2 [mem 0xd5100000-0xd60fffff 64bit pref] pci_bus 0000:20: resource 0 [io 0x1000-0x1fff] pci_bus 0000:20: resource 1 [mem 0xd7100000-0xd80fffff] pci_bus 0000:20: resource 2 [mem 0xd6100000-0xd70fffff 64bit pref] pci_bus 0000:05: resource 3 [io 0x0000-0xffff] pci_bus 0000:05: resource 4 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:3f: resource 0 [io 0x0000-0xffff] pci_bus 0000:3f: resource 1 [mem 0x00000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 12669k freed PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff8800059de000 - ffff8800099de000 software IO TLB at phys 0x59de000 - 0x99de000 Simple Boot Flag at 0x44 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1270056008.196:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7790 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:03.0: setting latency timer to 64 alloc irq_desc for 29 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:03.0: irq 29 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 30 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 31 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.1: irq 31 for MSI/MSI-X pcieport 0000:00:1c.3: setting latency timer to 64 alloc irq_desc for 32 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.3: irq 32 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 alloc irq_desc for 33 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.4: irq 33 for MSI/MSI-X \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f aer 0000:00:03.0:pcie02: AER service couldn't init device: _OSC failed pci_hotplug: PCI Hot Plug PCI Core version: 0.5 \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp: Slot [1] registered pci-stub: invalid id string "" ACPI: AC Adapter [ADP0] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:07/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:07/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: Fan [FAN] (on) ACPI: SSDT 00000000bbe91a98 002E0 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: SSDT 00000000bbe90698 00633 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-3 state ACPI: SSDT 00000000bbe91718 00303 (v01 PmRef ApIst 00003000 INTL 20051117) ACPI: SSDT 00000000bbe8fd98 00119 (v01 PmRef ApCst 00003000 INTL 20051117) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (41 C) ACPI: Battery Slot [BAT0] (battery present) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input3 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 alloc irq_desc for 34 on node -1 alloc kstat_irqs on node -1 ahci 0000:00:1f.2: irq 34 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xdb105000 port 0xdb105100 irq 34 ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 34 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xdb105000 port 0xdb105300 irq 34 ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 34 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdb105c00 ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.33.1-copy_dsdt ehci_hcd usb usb1: SerialNumber: 0000:00:1a.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected alloc irq_desc for 23 on node -1 alloc kstat_irqs on node -1 ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdb105800 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.33.1-copy_dsdt ehci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:08: RTC can wake from S4 rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu ------------[ cut here ]------------ usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 2:386:341 WARNING: at arch/x86/kernel/hpet.c:404 hpet_next_event+0x64/0x86() Hardware name: Satellite A505 hpet: compare register read back failed. Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.33.1-copy_dsdt #1 Call Trace: [] warn_slowpath_common+0x7c/0x94 [] warn_slowpath_fmt+0x41/0x43 [] hpet_next_event+0x64/0x86 [] hpet_legacy_next_event+0x10/0x12 [] clockevents_program_event+0x7a/0x83 [] tick_dev_program_event+0x3c/0xaa [] tick_broadcast_oneshot_control+0xa4/0x100 [] tick_notify+0x222/0x379 [] notifier_call_chain+0x37/0x63 [] raw_notifier_call_chain+0x14/0x16 [] clockevents_notify+0x3d/0x100 [] lapic_timer_state_broadcast+0x46/0x48 [] acpi_idle_enter_bm+0x187/0x2b2 [] ? notifier_call_chain+0x14/0x63 [] cpuidle_idle_call+0x99/0xf3 [] cpu_idle+0xaa/0xe4 [] start_secondary+0x1f2/0x233 ---[ end trace 064e6441cc9ca398 ]--- rtc_cmos 00:08: setting system clock to 2010-03-31 17:20:08 UTC (1270056008) Initalizing network drop monitor service input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 ata1: SATA link down (SStatus 0 SControl 300) usb 1-1: new high speed USB device using ehci_hcd and address 2 usb 1-1: New USB device found, idVendor=8087, idProduct=0020 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected usb 2-1: new high speed USB device using ehci_hcd and address 2 usb 2-1: New USB device found, idVendor=8087, idProduct=0020 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected usb 1-1.3: new high speed USB device using ehci_hcd and address 3 usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b128 usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=0 usb 1-1.3: Product: USB2.0 UVC WebCam usb 1-1.3: Manufacturer: Chicony Electronics Co., Ltd. ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) ata2.00: ACPI cmd ef/10:02:00:00:00:b0 (SET FEATURES) succeeded ata2.00: ACPI cmd ef/10:03:00:00:00:b0 (SET FEATURES) filtered out ata2.00: ACPI cmd ef/10:05:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04) ata2.00: ATA-8: Hitachi HTS545050B9A300, PB4OC64G, max UDMA/133 ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) ata2.00: ACPI cmd ef/10:03:00:00:00:b0 (SET FEATURES) filtered out ata2.00: ACPI cmd ef/10:05:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04) ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA Hitachi HTS54505 PB4O PQ: 0 ANSI: 5 sd 1:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1e0b1, caps: 0xd04731/0xa40000 synaptics: Toshiba Satellite A505 detected, limiting rate to 40pps. usb 2-1.2: new full speed USB device using ehci_hcd and address 3 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 usb 2-1.2: New USB device found, idVendor=058f, idProduct=9254 usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1.2: Product: Generic USB Hub usb 2-1.2: Manufacturer: ALCOR hub 2-1.2:1.0: USB hub found hub 2-1.2:1.0: 4 ports detected ata5: SATA link down (SStatus 0 SControl 300) sda1 sda2 sda3 sda4 < sda5 sda6 > sd 1:0:0:0: [sda] Attached SCSI disk usb 2-1.2.1: new low speed USB device using ehci_hcd and address 4 usb 2-1.2.1: New USB device found, idVendor=413c, idProduct=2003 usb 2-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1.2.1: Product: Dell USB Keyboard usb 2-1.2.1: Manufacturer: Dell input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1:1.0/input/input6 generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.2.1/input0 usb 2-1.2.2: new low speed USB device using ehci_hcd and address 5 usb 2-1.2.2: New USB device found, idVendor=046d, idProduct=c016 usb 2-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1.2.2: Product: Optical USB Mouse usb 2-1.2.2: Manufacturer: Logitech input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.2/2-1.2.2:1.0/input/input7 generic-usb 0003:046D:C016.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1.2.2/input0 usb 2-1.2.3: new low speed USB device using ehci_hcd and address 6 usb 2-1.2.3: New USB device found, idVendor=10d5, idProduct=55a2 usb 2-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1.2.3: Product: 2Port KVMSwicther usb 2-1.2.3: Manufacturer: No brand usb 2-1.2.3: SerialNumber: 02’ input: No brand 2Port KVMSwicther as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.3/2-1.2.3:1.0/input/input8 generic-usb 0003:10D5:55A2.0003: input,hidraw2: USB HID v1.10 Keyboard [No brand 2Port KVMSwicther] on usb-0000:00:1d.0-1.2.3/input0 usbhid 2-1.2.3:1.1: couldn't find an input interrupt endpoint ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata6.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) ata6.00: ACPI cmd ef/10:02:00:00:00:b0 (SET FEATURES) succeeded ata6.00: ACPI cmd ef/10:03:00:00:00:b0 (SET FEATURES) filtered out ata6.00: ACPI cmd ef/10:05:00:00:00:b0 (SET FEATURES) succeeded ata6.00: ATAPI: TSSTcorp CDDVDW TS-L633Y, TF01, max UDMA/100, ATAPI AN ata6.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) ata6.00: ACPI cmd ef/10:02:00:00:00:b0 (SET FEATURES) succeeded ata6.00: ACPI cmd ef/10:03:00:00:00:b0 (SET FEATURES) filtered out ata6.00: configured for UDMA/100 scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633Y TF01 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 5:0:0:0: Attached scsi CD-ROM sr0 sr 5:0:0:0: Attached scsi generic sg1 type 5 Freeing unused kernel memory: 940k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 1700k freed Freeing unused kernel memory: 1928k freed dracut: dracut-004-4.fc12 udev: starting version 145 CE: hpet increasing min_delta_ns to 15000 nsec dracut: Starting plymouth daemon acpi device:03: registered as cooling_device9 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input9 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) device-mapper: multipath: version 1.1.1 loaded dracut: Scanning devices sda6 for LVM volume groups dracut: Reading all physical volumes. This may take a while... dracut: Found volume group "vg_stevelt2" using metadata type lvm2 dracut: 2 logical volume(s) in volume group "vg_stevelt2" now active EXT4-fs (dm-0): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/mapper/vg_stevelt2-lv_root dracut: Switching root udev: starting version 145 input: PC Speaker as /devices/platform/pcspkr/input/input10 ohci1394 0000:04:00.3: PCI INT C -> GSI 17 (level, low) -> IRQ 17 ohci1394 0000:04:00.3: setting latency timer to 64 iTCO_vendor_support: vendor-support=0 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[d8100000-d81007ff] Max Packet=[2048] IR/IT contexts=[4/4] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 r8169 0000:02:00.0: setting latency timer to 64 alloc irq_desc for 35 on node -1 alloc kstat_irqs on node -1 r8169 0000:02:00.0: irq 35 for MSI/MSI-X eth0: RTL8102e at 0xffffc900050ae000, 00:26:6c:3e:5a:29, XID 04c00000 IRQ 35 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 ACPI: I/O resource 0000:00:1f.3 [0x6000-0x601f] conflicts with ACPI region SMBI [0x6000-0x600f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e822] (rev 1) alloc irq_desc for 18 on node -1 alloc kstat_irqs on node -1 sdhci-pci 0000:04:00.0: PCI INT D -> GSI 18 (level, low) -> IRQ 18 sdhci-pci 0000:04:00.0: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:04:00.0: setting latency timer to 64 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device USB2.0 UVC WebCam (04f2:b128) input: USB2.0 UVC WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) ieee1394: Host added: ID:BUS[0-00:1023] GUID[00080d266c3e5a29] ieee1394: Node added: ID:BUS[0-01:1023] GUID[000d6c0b009d7249] ieee1394: raw1394: /dev/raw1394 device initialized rtllib_crypt: registered algorithm 'NULL' rtllib_crypt: registered algorithm 'TKIP' rtllib_crypt: registered algorithm 'CCMP' rtllib_crypt: registered algorithm 'WEP' Linux kernel driver for RTL8192 based WLAN cards Copyright (c) 2007-2008, Realsil Wlan Driver rtl819xSE 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 rtl819xSE 0000:03:00.0: setting latency timer to 64 Memory mapped space start: 0xd9100000 Adapter(8192SE) is found - DeviceID=8172 =========>dm_InitRateAdaptiveMask: bUseRAMask=0 alloc irq_desc for 22 on node -1 alloc kstat_irqs on node -1 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 alloc irq_desc for 36 on node -1 alloc kstat_irqs on node -1 HDA Intel 0000:00:1b.0: irq 36 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 nvidia: module license 'NVIDIA' taints kernel. Disabling lock debugging due to kernel taint hda_codec: ALC272: BIOS auto-probing. ALSA sound/pci/hda/hda_codec.c:4284: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:4288: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:4292: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:4293: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:4296: dig-out=0x1e/0x0 ALSA sound/pci/hda/hda_codec.c:4304: inputs: mic=0x19, fmic=0x18, line=0x0, fline=0x0, cd=0x0, aux=0x0 ALSA sound/pci/hda/patch_realtek.c:1293: realtek: No valid SSID, checking pincfg 0x4016892d for NID 0x1d ALSA sound/pci/hda/patch_realtek.c:1309: realtek: Enabling init ASM_ID=0x892d CODEC_ID=10ec0272 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12 HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 alloc irq_desc for 37 on node -1 alloc kstat_irqs on node -1 HDA Intel 0000:01:00.1: irq 37 for MSI/MSI-X HDA Intel 0000:01:00.1: setting latency timer to 64 ALSA sound/pci/hda/hda_intel.c:709: azx_get_response timeout, switching to polling mode: last cmd=0x300f0000 ALSA sound/pci/hda/hda_generic.c:683: hda_generic: no proper input path found ALSA sound/pci/hda/hda_generic.c:431: hda_generic: no proper output path found ALSA sound/pci/hda/hda_generic.c:683: hda_generic: no proper input path found ALSA sound/pci/hda/hda_generic.c:431: hda_generic: no proper output path found ALSA sound/pci/hda/hda_generic.c:683: hda_generic: no proper input path found ALSA sound/pci/hda/hda_generic.c:431: hda_generic: no proper output path found ALSA sound/pci/hda/hda_generic.c:683: hda_generic: no proper input path found ALSA sound/pci/hda/hda_generic.c:431: hda_generic: no proper output path found ALSA sound/pci/hda/hda_generic.c:1035: hda_generic: no PCM found ALSA sound/pci/hda/hda_generic.c:1035: hda_generic: no PCM found ALSA sound/pci/hda/hda_generic.c:1035: hda_generic: no PCM found ALSA sound/pci/hda/hda_generic.c:1035: hda_generic: no PCM found nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:01:00.0: setting latency timer to 64 vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.15 Fri Mar 12 00:29:13 PST 2010 EXT4-fs (sda5): mounted filesystem with ordered data mode Adding 6094840k swap on /dev/mapper/vg_stevelt2-lv_swap. Priority:-1 extents:1 across:6094840k microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x3 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x3 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x3 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x3 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x3 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x3 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x3 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x3 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: Microcode Update Driver: v2.00 , Peter Oruba microcode: Microcode Update Driver: v2.00 removed. NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team r8169: eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready rtl819xSE 0000:03:00.0: firmware: requesting RTL8192SE/rtl8192sfw.bin rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 ===>rtllib_start_scan() ADDRCONF(NETDEV_UP): wlan0: link is not ready RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Linking with 2WIRE674,channel:11, qos:0, myHT:1, networkHT:0, mode:6 cur_net.flags:0x406 ===>rtllib_associate_procedure_wq(), chan:11 HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0 Linking with 2WIRE674,channel:11, qos:0, myHT:1, networkHT:0, mode:6 cur_net.flags:0x406 ===>rtllib_associate_procedure_wq(), chan:11 HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0 rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0 Associated successfully normal associate Using G rates:108 Successfully associated, ht not enabled(0, 0) ===>rtl8192se_link_change():ieee->iw_mode is 2 ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready RX: IEEE802.1X EPAOL frame! RX: IEEE802.1X EPAOL frame! alg name:TKIP ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0 dm_check_edca_turbo():iot peer is unknown, bssid:00:22:a4:85:f2:31 RX: IEEE802.1X EPAOL frame! alg name:TKIP ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0 DHCP pkt src port:68, dest port:67!! wlan0: no IPv6 routers present RX: IEEE802.1X EPAOL frame! alg name:TKIP ===========>set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0 ===>rtl8192se_link_change():ieee->iw_mode is 2 ===>rtl8192se_link_change():ieee->iw_mode is 2