Linux version 2.6.32-gentoo (root@alice) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #4 SMP Thu Dec 31 00:43:40 CET 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bf680000 (usable) BIOS-e820: 00000000bf680000 - 00000000bf690000 (ACPI NVS) BIOS-e820: 00000000bf690000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) DMI present. last_pfn = 0xbf680 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0C0000000 mask FC0000000 uncachable 1 base 000000000 mask F00000000 write-back 2 base 100000000 mask FC0000000 write-back 3 base 0BF700000 mask FFFF00000 uncachable 4 base 0BF800000 mask FFF800000 uncachable 5 disabled 6 disabled 7 disabled original variable MTRRs reg 0, base: 3GB, range: 1GB, type UC reg 1, base: 0GB, range: 4GB, type WB reg 2, base: 4GB, range: 1GB, type WB reg 3, base: 3063MB, range: 1MB, type UC reg 4, base: 3064MB, range: 8MB, type UC total RAM covered: 4087M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 16M num_reg: 5 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 3063MB, range: 1MB, type UC reg 3, base: 3064MB, range: 8MB, type UC reg 4, base: 4GB, range: 1GB, type WB e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved) initial memory mapped : 0 - 00c00000 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 ACPI: RSDP 000f7710 00024 (v02 PTLTD ) ACPI: XSDT bf686e7f 00094 (v01 FSC PC 06040000 LTP 00000000) ACPI: FACP bf68eb96 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) ACPI: DSDT bf68838c 06796 (v02 IEC___ S11_____ 06040000 INTL 20050624) ACPI: FACS bf68ffc0 00040 ACPI: APIC bf68ec8a 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: HPET bf68ecf2 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: MCFG bf68ed2a 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: SLIT bf68ed66 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: TCPA bf68eda2 00032 (v01 Intel CRESTLN 06040000 00005A52) ACPI: TMOR bf68edd4 00026 (v01 PTLTD 06040000 PTL 00000003) ACPI: SLIC bf68edfa 00176 (v01 FSC PC 06040000 PTL_ 00000000) ACPI: APIC bf68ef70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) ACPI: BOOT bf68efd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) ACPI: SSDT bf6880af 002DD (v01 SataRe SataAhci 00001000 INTL 20050624) ACPI: SSDT bf68749f 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624) ACPI: SSDT bf6873f9 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624) ACPI: SSDT bf686f13 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: Local APIC address 0xfee00000 2174MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00008000 - 0000ef00 (8 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 0000671e24] TEXT DATA BSS ==> [0000100000 - 0000671e24] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #5 [0000672000 - 0000675130] BRK ==> [0000672000 - 0000675130] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] found SMP MP-table at [c00f77a0] f77a0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x000bf680 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bf680 On node 0 totalpages: 783903 free_area_init_node: node 0, pgdat c0589080, node_mem_map c1001000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 4350 pages used for memmap HighMem zone: 552324 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 11 pages/cpu @c2c00000 s22936 r0 d22120 u2097152 pcpu-alloc: s22936 r0 d22120 u2097152 alloc=1*4194304 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 777777 Kernel command line: BOOT_IMAGE=Linux-test ro root=803 single resume video.brightness_switch_enabled=0 i915.modeset=1 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (000377fe:000bf680) Memory: 3103492k/3136000k available (3248k kernel code, 31084k reserved, 1416k data, 364k init, 2226696k highmem) virtual kernel memory layout: fixmap : 0xfff6b000 - 0xfffff000 ( 592 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc058f000 - 0xc05ea000 ( 364 kB) .data : 0xc042c164 - 0xc058e1c4 (1416 kB) .text : 0xc0100000 - 0xc042c164 (3248 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Hierarchical RCU implementation. NR_IRQS:384 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled HPET config register value = 0xFFFFFFFF. Disabling HPET Fast TSC calibration using PIT Detected 1995.090 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.18 BogoMIPS (lpj=7980360) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring handled by SMI using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20090903 ACPI Warning: Detected an unsupported executable opcode at module-level: [0x0070] at table offset 0x678F (20090903/psloop-522) ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3990.28 BogoMIPS (lpj=7980577) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (7980.46 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: EC: GPE storm detected, transactions will use polling mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 ACPI: Power Resource [FN00] (on) ACPI: ACPI Dock Station Driver: 1 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xfc000000-0xfc0fffff] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:00:02.0: reg 20 io port: [0x18f8-0x18ff] pci 0000:00:02.1: reg 10 64bit mmio: [0xfc100000-0xfc1fffff] pci 0000:00:1a.0: reg 20 io port: [0x1840-0x185f] pci 0000:00:1a.1: reg 20 io port: [0x1860-0x187f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc406000-0xfc4063ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc400000-0xfc403fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc406400-0xfc4067ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0300 (mask 000f) pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x1830-0x183f] pci 0000:00:1f.2: reg 10 io port: [0x1c50-0x1c57] pci 0000:00:1f.2: reg 14 io port: [0x1c44-0x1c47] pci 0000:00:1f.2: reg 18 io port: [0x1c48-0x1c4f] pci 0000:00:1f.2: reg 1c io port: [0x1c40-0x1c43] pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc405000-0xfc4057ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff] pci 0000:04:00.0: reg 10 64bit mmio: [0xf8000000-0xf8003fff] pci 0000:04:00.0: reg 18 io port: [0x3000-0x30ff] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:04:00.0: supports D1 D2 pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff] pci 0000:06:00.0: reg 10 64bit mmio: [0xfa000000-0xfa001fff] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff] pci 0000:00:1c.2: bridge 32bit mmio: [0xfa000000-0xfbffffff] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff] pci 0000:00:1e.0: transparent bridge pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xe0000000-0xefffffff has been reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved system 00:05: ioport range 0x200-0x20f has been reserved system 00:05: ioport range 0x400-0x40f has been reserved system 00:05: ioport range 0x680-0x69f has been reserved system 00:05: ioport range 0x800-0x80f has been reserved system 00:05: ioport range 0x1000-0x107f has been reserved system 00:05: ioport range 0x1180-0x11bf has been reserved system 00:05: ioport range 0x1640-0x164f has been reserved system 00:05: ioport range 0xfe00-0xfe00 has been reserved system 00:06: ioport range 0x6a0-0x6af has been reserved system 00:06: ioport range 0x6b0-0x6ff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x2000-0x2fff pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.1: IO window: 0x3000-0x3fff pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06 pci 0000:00:1c.2: IO window: 0x4000-0x4fff pci 0000:00:1c.2: MEM window: 0xfa000000-0xfbffffff pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f5ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: enabling device (0000 -> 0003) pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: enabling device (0000 -> 0003) pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff] pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff] pci_bus 0000:06: resource 0 io: [0x4000-0x4fff] pci_bus 0000:06: resource 1 mem: [0xfa000000-0xfbffffff] pci_bus 0000:06: resource 2 pref mem [0xf4000000-0xf5ffffff] pci_bus 0000:08: resource 3 io: [0x00-0xffff] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:02.0: Boot video device Simple Boot Flag at 0x36 set to 0x1 highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 1714 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). ACPI: AC Adapter [ADP1] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID0] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN0] (on) acpi device:05: registered as cooling_device1 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) ACPI: SSDT bf687d6d 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT bf6876fe 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet processor LNXCPU:00: registered as cooling_device2 ACPI: SSDT bf687fe7 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) ACPI: SSDT bf687ce8 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) processor LNXCPU:01: registered as cooling_device3 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (27 C) ACPI: Invalid active1 threshold thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [TZ01] (70 C) [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 i915 0000:00:02.0: irq 27 for MSI/MSI-X [drm] set up 7M of stolen space ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) [drm] TV-16: set mode NTSC 480i 0 [drm] LVDS-8: set mode 1280x800 1f Console: switching to colour frame buffer device 160x50 fb0: inteldrmfb frame buffer device registered panic notifier [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A floppy0: no floppy controllers found brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x03) pci 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1830-0x1837 ide1: BM-DMA at 0x1838-0x183f Probing IDE interface ide0... hda: SlimtypeDVD A DS8A1H, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 ide-cd driver 5.00 ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 3ware Storage Controller device driver for Linux v1.26.02.002. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: irq 28 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xfc405000 port 0xfc405100 irq 28 ata2: SATA max UDMA/133 abar m2048@0xfc405000 port 0xfc405180 irq 28 ata3: SATA max UDMA/133 abar m2048@0xfc405000 port 0xfc405200 irq 28 sky2 driver version 1.25 sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 sky2 0000:04:00.0: setting latency timer to 64 sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3 sky2 0000:04:00.0: irq 29 for MSI/MSI-X sky2 eth0: addr 00:a0:d1:cb:34:be ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc406000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc406400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input5 wistron_btns: System unknown cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ACPI Warning for \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006) ata1.00: _GTF unexpected object type 0x1 usb 1-2: new high speed USB device using ehci_hcd and address 2 ata1.00: ATA-8: ST9320421AS, SD13, max UDMA/133 ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: _GTF unexpected object type 0x1 ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST9320421AS SD13 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk usb 1-2: configuration #1 chosen from 1 choice usb 1-3: new high speed USB device using ehci_hcd and address 3 usb 1-3: configuration #1 chosen from 1 choice Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04753/0x200000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 registered taskstats version 1 REISERFS (device sda3): found reiserfs format "3.6" with standard journal REISERFS (device sda3): using ordered data mode REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda3): checking transaction log (sda3) REISERFS (device sda3): Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly on device 8:3. Freeing unused kernel memory: 364k freed usb 4-2: new full speed USB device using uhci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice udev: starting version 146 cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 pci : SMBus base address uninitialized, upgrade BIOS iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:06:00.0: enabling device (0104 -> 0106) iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:06:00.0: setting latency timer to 64 pci : Detected Intel Wireless WiFi Link 4965AGN REV=0x4 pci : Tunable channels: 13 802.11bg, 19 802.11a channels iwlagn 0000:06:00.0: irq 30 for MSI/MSI-X pci : Error allocating IRQ 4096 iwlagn 0000:06:00.0: PCI INT A disabled iwlagn: probe of 0000:06:00.0 failed with error -22 HDA Intel 0000:00:1b.0: enabling device (0104 -> 0106) HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 hda-intel: unable to grab IRQ 4096, disabling device HDA Intel 0000:00:1b.0: PCI INT A disabled HDA Intel: probe of 0000:00:1b.0 failed with error -16 Initializing USB Mass Storage driver... scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device FO13FF-65-1 PC-CAM (05c8:0103) input: FO13FF-65-1 PC-CAM as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input8 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) scsi 3:0:0:0: Direct-Access Generic STORAGE DEVICE 9407 PQ: 0 ANSI: 0 usb-storage: device scan complete sd 3:0:0:0: [sdb] Attached SCSI removable disk atkbd.c: Unknown key pressed (translated set 2, code 0x83 on isa0060/serio0). atkbd.c: Use 'setkeycodes e003 ' to make it known. ieee1394: raw1394: /dev/raw1394 device initialized fuse init (API version 7.13) Adding 6144852k swap on /dev/sda4. Priority:-1 extents:1 across:6144852k sky2 eth0: enabling interface sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk serial 00:08: disabled ACPI handle has no context! sky2 eth0: disabling interface pci 0000:00:1f.3: PCI INT C disabled PIIX_IDE 0000:00:1f.1: PCI INT A disabled ehci_hcd 0000:00:1d.7: PCI INT A disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled ehci_hcd 0000:00:1a.7: PCI INT C disabled uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.0: PCI INT A disabled ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... CPU 1 is now offline SMP alternatives: switching to UP code CPU1 is down Extended CMOS year: 2000 Back to C! CPU0: Thermal monitoring handled by SMI Extended CMOS year: 2000 Force enabled HPET at resume Enabling non-boot CPUs ... SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3990.02 BogoMIPS (lpj=7980044) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a CPU1 is up ACPI: Waking up from system sleep state S3 i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x107) i915 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0x18f9) i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900004) uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) pci 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) pci 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100102) pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xf1f1f001) pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf7f0f600) pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020) pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x30200) pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40207) pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201) pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800) pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030) pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2100007, writing 0x2100107) PIIX_IDE 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x205) ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0xc0000000) sky2 0000:04:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) sky2 0000:04:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x3001) sky2 0000:04:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf8000004) sky2 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) sky2 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) pci 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) pci 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004) pci 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) pci 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100102) PM: Device PNP0C0D:00 failed to resume: error 1 i915 0000:00:02.0: setting latency timer to 64 [drm] LVDS-8: set mode 1280x800 1f uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 usb usb4: root hub lost power or was reset ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb5: root hub lost power or was reset uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb6: root hub lost power or was reset uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb7: root hub lost power or was reset ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 PIIX_IDE 0000:00:1f.1: setting latency timer to 64 ahci 0000:00:1f.2: setting latency timer to 64 pci 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 sky2 eth0: enabling interface serial 00:08: activated hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ata3: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) sd 0:0:0:0: [sda] Starting disk sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: _GTF unexpected object type 0x1 ata1.00: _GTF unexpected object type 0x1 ata1.00: configured for UDMA/133 usb 1-2: reset high speed USB device using ehci_hcd and address 2 usb 1-3: reset high speed USB device using ehci_hcd and address 3 usb 4-2: reset full speed USB device using uhci_hcd and address 2 Restarting tasks ... done.