Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.2 (GCC) ) #1 SMP PREEMPT Tue Nov 10 19:01:40 CET 2009 Command line: root=/dev/disk/by-uuid/b8ccadc6-a3e9-4480-a31f-c9b26acdaf35 ro # acpi_osi="!Windows 2006" KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000ae5b4000 (usable) BIOS-e820: 00000000ae5b4000 - 00000000ae7b4000 (ACPI NVS) BIOS-e820: 00000000ae7b4000 - 00000000afd94000 (usable) BIOS-e820: 00000000afd94000 - 00000000afdbf000 (reserved) BIOS-e820: 00000000afdbf000 - 00000000afe8c000 (usable) BIOS-e820: 00000000afe8c000 - 00000000afebf000 (ACPI NVS) BIOS-e820: 00000000afebf000 - 00000000afee2000 (usable) BIOS-e820: 00000000afee2000 - 00000000afef7000 (ACPI data) BIOS-e820: 00000000afef7000 - 00000000aff00000 (usable) BIOS-e820: 00000000f7000000 - 00000000f8000000 (reserved) BIOS-e820: 00000000feb00000 - 00000000feb01000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) DMI 2.6 present. last_pfn = 0xaff00 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-through MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFE0000000 write-back 2 base 0000A0000000 mask FFFFF0000000 write-back 3 base 0000FFE00000 mask FFFFFFE00000 write-protect 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000001000 (usable) modified: 0000000000001000 - 0000000000006000 (reserved) modified: 0000000000006000 - 000000000009fc00 (usable) modified: 000000000009fc00 - 00000000000a0000 (reserved) modified: 00000000000e0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 00000000ae5b4000 (usable) modified: 00000000ae5b4000 - 00000000ae7b4000 (ACPI NVS) modified: 00000000ae7b4000 - 00000000afd94000 (usable) modified: 00000000afd94000 - 00000000afdbf000 (reserved) modified: 00000000afdbf000 - 00000000afe8c000 (usable) modified: 00000000afe8c000 - 00000000afebf000 (ACPI NVS) modified: 00000000afebf000 - 00000000afee2000 (usable) modified: 00000000afee2000 - 00000000afef7000 (ACPI data) modified: 00000000afef7000 - 00000000aff00000 (usable) modified: 00000000f7000000 - 00000000f8000000 (reserved) modified: 00000000feb00000 - 00000000feb01000 (reserved) modified: 00000000fec00000 - 00000000fec01000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000ffe00000 - 0000000100000000 (reserved) initial memory mapped : 0 - 20000000 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-00000000aff00000 0000000000 - 0080000000 page 1G 0080000000 - 00afe00000 page 2M 00afe00000 - 00aff00000 page 4k kernel direct mapping tables up to aff00000 @ 8000-b000 RAMDISK: 37f55000 - 37fef8c8 ACPI: RSDP 00000000000fe020 00024 (v02 TOSINV) ACPI: XSDT 00000000afef6120 0005C (v01 TOSINV TOSINV00 00000003 01000013) ACPI: FACP 00000000afef5000 000F4 (v04 TOSINV TOSINV00 00000003 MSFT 01000013) ACPI: DSDT 00000000afee6000 0B13C (v01 TOSINV TOSINV00 F0000000 MSFT 01000013) ACPI: FACS 00000000afe9c000 00040 ACPI: HPET 00000000afef4000 00038 (v01 TOSINV TOSINV00 00000001 MSFT 01000013) ACPI: APIC 00000000afef3000 00068 (v02 TOSINV TOSINV00 00000001 MSFT 01000013) ACPI: MCFG 00000000afef2000 0003C (v01 TOSINV TOSINV00 00000001 MSFT 01000013) ACPI: BOOT 00000000afee5000 00028 (v01 TOSINV TOSINV00 00000001 MSFT 01000013) ACPI: SLIC 00000000afee4000 00176 (v01 TOSINV TOSINV00 00000001 MSFT 01000013) ACPI: SSDT 00000000afee2000 00390 (v01 AMD PowerNow 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 00aff00000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 00016837d0] TEXT DATA BSS ==> [0001000000 - 00016837d0] #3 [0037f55000 - 0037fef8c8] RAMDISK ==> [0037f55000 - 0037fef8c8] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0001684000 - 0001684223] BRK ==> [0001684000 - 0001684223] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ffffea0000000000-ffffea00027fffff] PMD -> [ffff880001c00000-ffff8800043fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[7] active PFN ranges 0: 0x00000000 -> 0x00000001 0: 0x00000006 -> 0x0000009f 0: 0x00000100 -> 0x000ae5b4 0: 0x000ae7b4 -> 0x000afd94 0: 0x000afdbf -> 0x000afe8c 0: 0x000afebf -> 0x000afee2 0: 0x000afef7 -> 0x000aff00 On node 0 totalpages: 719911 DMA zone: 56 pages used for memmap DMA zone: 101 pages reserved DMA zone: 3837 pages, LIFO batch:0 DMA32 zone: 9797 pages used for memmap DMA32 zone: 706120 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x1002a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 0000000000001000 - 0000000000006000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000ae5b4000 - 00000000ae7b4000 PM: Registered nosave memory: 00000000afd94000 - 00000000afdbf000 PM: Registered nosave memory: 00000000afe8c000 - 00000000afebf000 PM: Registered nosave memory: 00000000afee2000 - 00000000afef7000 Allocating PCI resources starting at aff00000 (gap: aff00000:47100000) NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 28 pages at ffff8800016a2000, static data 82400 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 709957 Kernel command line: root=/dev/disk/by-uuid/b8ccadc6-a3e9-4480-a31f-c9b26acdaf35 ro # acpi_osi="!Windows 2006" ACPI: Deleted _OSI(Windows 2006) PID hash table entries: 4096 (order: 12, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Node 0: aperture @ fffe000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 2824120k/2882560k available (3630k kernel code, 2916k absent, 54824k reserved, 1499k data, 484k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 NR_IRQS:768 Fast TSC calibration using PIT Detected 1995.115 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered HPET: 4 timers in total, 1 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.48 BogoMIPS (lpj=6650373) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) tseg: 00aff00000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks using C1E aware idle routine Performance Counters: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic counters: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose counters: 0 ... counter mask: 000000000000000f ACPI: Core revision 20090521 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) II Dual-Core M300 stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3991.24 BogoMIPS (lpj=6649992) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Athlon(tm) II Dual-Core M300 stepping 02 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs System has AMD C1E enabled Switch to broadcast mode on CPU1 Total of 2 processors activated (7983.72 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 Switch to broadcast mode on CPU0 Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 node 0 link 0: io port [0, ffffff] TOM: 00000000c0000000 aka 3072M Fam 10h mmconf [f7000000, f7ffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, cfffffff] node 0 link 0: mmio [d0000000, d21fffff] node 0 link 0: mmio [d2200000, d23fffff] node 0 link 0: mmio [d2400000, f6ffffff] node 0 link 0: mmio [f7000000, f7ffffff] ==> none node 0 link 0: mmio [f8000000, ffffffff] bus: [00,0f] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [c0000000, f6ffffff] bus: 00 index 3 mmio: [f8000000, fcffffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base f7000000 segment 0 buses 0 - 15 PCI: MCFG area at f7000000 reserved in E820 PCI: Using MMCONFIG at f7000000 - f7ffffff PCI: Using configuration type 1 for base access mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI Error (psargs-0359): [A353] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\FLNK] (Node ffff8800af812060), AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.LREG] (Node ffff8800af836300), AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._INI] (Node ffff8800af812c80), AE_NOT_FOUND ACPI Error (psargs-0359): [DR] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.AGP_.VGA_._INI] (Node ffff8800af811500), AE_NOT_FOUND ACPI Warning: \_SB_.PCI0.PB2_._PRW: Return type mismatch - found Integer, expected Package 20090521 nspredef-940 ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.PB2_._PRW] (Node ffff8800af811d20), AE_TYPE ACPI Error: Type returned from _PRW was incorrect: Integer, expected Btypes: 8 20090521 uteval-319 ACPI Warning: \_SB_.PCI0.PB3_._PRW: Return type mismatch - found Integer, expected Package 20090521 nspredef-940 ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.PB3_._PRW] (Node ffff8800af819820), AE_TYPE ACPI Error: Type returned from _PRW was incorrect: Integer, expected Btypes: 8 20090521 uteval-319 ACPI Warning: \_SB_.PCI0.PB5_._PRW: Return type mismatch - found Integer, expected Package 20090521 nspredef-940 ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.PB5_._PRW] (Node ffff8800af81b080), AE_TYPE ACPI Error: Type returned from _PRW was incorrect: Integer, expected Btypes: 8 20090521 uteval-319 ACPI Warning: \_SB_.PCI0.PB7_._PRW: Return type mismatch - found Integer, expected Package 20090521 nspredef-940 ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.PB7_._PRW] (Node ffff8800af81b420), AE_TYPE ACPI Error: Type returned from _PRW was incorrect: Integer, expected Btypes: 8 20090521 uteval-319 ACPI Warning: \_SB_.PCI0.PB9_._PRW: Return type mismatch - found Integer, expected Package 20090521 nspredef-940 ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.PB9_._PRW] (Node ffff8800af81b4a0), AE_TYPE ACPI Error: Type returned from _PRW was incorrect: Integer, expected Btypes: 8 20090521 uteval-319 ACPI Warning: \_SB_.PCI0.PB10._PRW: Return type mismatch - found Integer, expected Package 20090521 nspredef-940 ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.PB10._PRW] (Node ffff8800af81b520), AE_TYPE ACPI Error: Type returned from _PRW was incorrect: Integer, expected Btypes: 8 20090521 uteval-319 ACPI Warning: \_SB_.PCI0.AZAL._PRW: Return type mismatch - found Integer, expected Package 20090521 nspredef-940 ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.AZAL._PRW] (Node ffff8800af81b620), AE_TYPE ACPI Error: Type returned from _PRW was incorrect: Integer, expected Btypes: 8 20090521 uteval-319 ACPI Warning: \_SB_.PCI0.USB0._PRW: Return type mismatch - found Integer, expected Package 20090521 nspredef-940 ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.USB0._PRW] (Node ffff8800af81b6c0), AE_TYPE ACPI Error: Type returned from _PRW was incorrect: Integer, expected Btypes: 8 20090521 uteval-319 ACPI Warning: \_SB_.PCI0.USB1._PRW: Return type mismatch - found Integer, expected Package 20090521 nspredef-940 ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.USB1._PRW] (Node ffff8800af81b980), AE_TYPE ACPI Error: Type returned from _PRW was incorrect: Integer, expected Btypes: 8 20090521 uteval-319 ACPI Warning: \_SB_.PCI0.USB4._PRW: Return type mismatch - found Integer, expected Package 20090521 nspredef-940 ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.USB4._PRW] (Node ffff8800af81d040), AE_TYPE ACPI Error: Type returned from _PRW was incorrect: Integer, expected Btypes: 8 20090521 uteval-319 ACPI Warning: \_SB_.PCI0.USB5._PRW: Return type mismatch - found Integer, expected Package 20090521 nspredef-940 ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.USB5._PRW] (Node ffff8800af81d200), AE_TYPE ACPI Error: Type returned from _PRW was incorrect: Integer, expected Btypes: 8 20090521 uteval-319 ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI Error (dswload-0674): [ ] Namespace lookup failure, AE_NOT_FOUND ACPI Exception: AE_NOT_FOUND, During name lookup/catalog 20090521 psloop-227 ACPI Error (psparse-0537): Method parse/execution failed [\_PIC] (Node ffff8800af812760), AE_NOT_FOUND ACPI Error (psargs-0359): [DR ] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.VALZ._STA] (Node ffff8800af812540), AE_NOT_FOUND ACPI Error: Found unknown opcode 39 at AML address ffffc900000132cd offset 0, ignoring 20090521 psloop-137 ACPI Error (psargs-0359): [EG5] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.FWEX._STA] (Node ffff8800af8125c0), AE_NOT_FOUND ACPI Error: Needed [Integer/String/Buffer], found [Thermal] ffff8800af841580 20090521 exresop-422 ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] 20090521 dswexec-445 ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PWRB._STA] (Node ffff8800af812800), AE_AML_OPERAND_TYPE ACPI Error (psargs-0359): [DGSp] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.BAT0._STA] (Node ffff8800af812960), AE_NOT_FOUND ACPI Error (psargs-0359): [_Q59] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.ADP0._STA] (Node ffff8800af812aa0), AE_NOT_FOUND ACPI Exception: AE_BAD_PARAMETER, Extracting _PRW package 20090521 scan-777 ACPI Exception: AE_BAD_PARAMETER, Extracting _PRW package 20090521 scan-777 ACPI Exception: AE_BAD_PARAMETER, Extracting _PRW package 20090521 scan-777 ACPI Exception: AE_BAD_PARAMETER, Extracting _PRW package 20090521 scan-777 ACPI Exception: AE_BAD_PARAMETER, Extracting _PRW package 20090521 scan-777 ACPI Exception: AE_BAD_PARAMETER, Extracting _PRW package 20090521 scan-777 ACPI Exception: AE_BAD_PARAMETER, Extracting _PRW package 20090521 scan-777 ACPI Exception: AE_BAD_PARAMETER, Extracting _PRW package 20090521 scan-777 ACPI Exception: AE_BAD_PARAMETER, Extracting _PRW package 20090521 scan-777 ACPI Exception: AE_BAD_PARAMETER, Extracting _PRW package 20090521 scan-777 ACPI Exception: AE_BAD_PARAMETER, Extracting _PRW package 20090521 scan-777 ACPI: Power Resource [PFA1] (off) ACPI: No dock devices found. ACPI Error (psargs-0359): [B5EN] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._CRS] (Node ffff8800af8110e0), AE_NOT_FOUND ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:11.0: reg 10 io port: [0x9038-0x903f] pci 0000:00:11.0: reg 14 io port: [0x904c-0x904f] pci 0000:00:11.0: reg 18 io port: [0x9030-0x9037] pci 0000:00:11.0: reg 1c io port: [0x9048-0x904b] pci 0000:00:11.0: reg 20 io port: [0x9010-0x901f] pci 0000:00:11.0: reg 24 32bit mmio: [0xd2408000-0xd24083ff] pci 0000:00:12.0: reg 10 32bit mmio: [0xd2407000-0xd2407fff] pci 0000:00:12.1: reg 10 32bit mmio: [0xd2406000-0xd2406fff] pci 0000:00:12.2: reg 10 32bit mmio: [0xd2408500-0xd24085ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10 32bit mmio: [0xd2405000-0xd2405fff] pci 0000:00:13.1: reg 10 32bit mmio: [0xd2404000-0xd2404fff] pci 0000:00:13.2: reg 10 32bit mmio: [0xd2408400-0xd24084ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.2: reg 10 64bit mmio: [0xd2400000-0xd2403fff] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:01:05.0: reg 10 32bit mmio: [0xc0000000-0xcfffffff] pci 0000:01:05.0: reg 14 io port: [0x8000-0x80ff] pci 0000:01:05.0: reg 18 32bit mmio: [0xd2300000-0xd230ffff] pci 0000:01:05.0: reg 24 32bit mmio: [0xd2200000-0xd22fffff] pci 0000:01:05.0: supports D1 D2 pci 0000:01:05.1: reg 10 32bit mmio: [0xd2310000-0xd2313fff] pci 0000:01:05.1: supports D1 D2 pci 0000:00:01.0: bridge io port: [0x8000-0x8fff] pci 0000:00:01.0: bridge 32bit mmio: [0xd2200000-0xd23fffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] pci 0000:02:00.0: reg 10 io port: [0x7000-0x70ff] pci 0000:02:00.0: reg 14 32bit mmio: [0xd2100000-0xd2103fff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot pci 0000:02:00.0: PME# disabled pci 0000:00:04.0: bridge io port: [0x7000-0x7fff] pci 0000:00:04.0: bridge 32bit mmio: [0xd2100000-0xd21fffff] pci 0000:03:00.0: reg 10 io port: [0x6000-0x60ff] pci 0000:03:00.0: reg 18 64bit mmio: [0xd0010000-0xd0010fff] pci 0000:03:00.0: reg 20 64bit mmio: [0xd0000000-0xd000ffff] pci 0000:03:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:05.0: bridge io port: [0x6000-0x6fff] pci 0000:00:05.0: bridge 64bit mmio pref: [0xd0000000-0xd00fffff] pci 0000:00:06.0: bridge io port: [0x2000-0x5fff] pci 0000:00:06.0: bridge 32bit mmio: [0xd1100000-0xd20fffff] pci 0000:00:06.0: bridge 64bit mmio pref: [0xd0100000-0xd10fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI Error (psargs-0359): [BUF_] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._PRT] (Node ffff8800af811300), AE_NOT_FOUND ACPI Exception: AE_NOT_FOUND, Evaluating _PRT [AE_NOT_FOUND] 20090521 pci_irq-267 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI Error (psargs-0359): [IMX ] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.AGP_._PRT] (Node ffff8800af8113a0), AE_NOT_FOUND ACPI Exception: AE_NOT_FOUND, Evaluating _PRT [AE_NOT_FOUND] 20090521 pci_irq-267 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] ACPI Warning: \_SB_.PCI0.PB4_._PRT: Return type mismatch - found Integer, expected Package 20090521 nspredef-940 ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.PB4_._PRT] (Node ffff8800af81b020), AE_TYPE ACPI Error: Type returned from _PRT was incorrect: Integer, expected Btypes: 8 20090521 uteval-319 ACPI Exception: AE_TYPE, Evaluating _PRT [AE_TYPE] 20090521 pci_irq-267 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] ACPI Warning: \_SB_.PCI0.PB5_._PRT: Return type mismatch - found Integer, expected Package 20090521 nspredef-940 ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.PB5_._PRT] (Node ffff8800af81b0a0), AE_TYPE ACPI Error: Type returned from _PRT was incorrect: Integer, expected Btypes: 8 20090521 uteval-319 ACPI Exception: AE_TYPE, Evaluating _PRT [AE_TYPE] 20090521 pci_irq-267 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] ACPI Warning: \_SB_.PCI0.PB6_._PRT: Return type mismatch - found Integer, expected Package 20090521 nspredef-940 ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.PB6_._PRT] (Node ffff8800af81b100), AE_TYPE ACPI Error: Type returned from _PRT was incorrect: Integer, expected Btypes: 8 20090521 uteval-319 ACPI Exception: AE_TYPE, Evaluating _PRT [AE_TYPE] 20090521 pci_irq-267 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI Warning: \_SB_.PCI0.P2P_._PRT: Return type mismatch - found Integer, expected Package 20090521 nspredef-940 ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.P2P_._PRT] (Node ffff8800af836660), AE_TYPE ACPI Error: Type returned from _PRT was incorrect: Integer, expected Btypes: 8 20090521 uteval-319 ACPI Exception: AE_TYPE, Evaluating _PRT [AE_TYPE] 20090521 pci_irq-267 PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet: hpet2 irq 24 for MSI Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.HSB1._STA] (Node ffff8800af8121a0), AE_TYPE ACPI Error: Type returned from _STA was incorrect: Device, expected Btypes: 1 20090521 uteval-319 ACPI Error (psargs-0359): [DR ] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.VALZ._STA] (Node ffff8800af812540), AE_NOT_FOUND ACPI Error: Found unknown opcode 39 at AML address ffffc900000132cd offset 0, ignoring 20090521 psloop-137 ACPI Error (psargs-0359): [EG5] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.FWEX._STA] (Node ffff8800af8125c0), AE_NOT_FOUND ACPI Error: Needed [Integer/String/Buffer], found [Thermal] ffff8800af841580 20090521 exresop-422 ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] 20090521 dswexec-445 ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PWRB._STA] (Node ffff8800af812800), AE_AML_OPERAND_TYPE ACPI Error (uteval-0256): Method execution failed [\_SB_.PWRB._STA] (Node ffff8800af812800), AE_AML_OPERAND_TYPE ACPI Error (psargs-0359): [DGSp] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.BAT0._STA] (Node ffff8800af812960), AE_NOT_FOUND ACPI Error (psargs-0359): [_Q59] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.ADP0._STA] (Node ffff8800af812aa0), AE_NOT_FOUND ACPI Error (psargs-0359): [B5EN] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._CRS] (Node ffff8800af8110e0), AE_NOT_FOUND ACPI Error: No object attached to node ffff8800af8072a0 20090521 exresnte-128 ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.MEMR._CRS] (Node ffff8800af811160), AE_AML_NO_OPERAND ACPI Error (uteval-0256): Method execution failed [\_SB_.PCI0.MEMR._CRS] (Node ffff8800af811160), AE_AML_NO_OPERAND pnp 00:01: can't evaluate _CRS: 12290ACPI Warning: \_SB_.PCI0.LPC0.RTC_._CRS: Return type mismatch - found Integer, expected Buffer 20090521 nspredef-940 ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.LPC0.RTC_._CRS] (Node ffff8800af81ec00), AE_TYPE ACPI Error: Type returned from _CRS was incorrect: Integer, expected Btypes: 4 20090521 uteval-319 pnp 00:04: can't evaluate _CRS: 8ACPI Warning: \_SB_.PCI0.LPC0.MEM_._CRS: Return type mismatch - found Integer, expected Buffer 20090521 nspredef-940 ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.LPC0.MEM_._CRS] (Node ffff8800af81eee0), AE_TYPE ACPI Error: Type returned from _CRS was incorrect: Integer, expected Btypes: 4 20090521 uteval-319 pnp 00:08: can't evaluate _CRS: 8 pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered system 00:07: ioport range 0x400-0x4cf has been reserved system 00:07: ioport range 0x4d0-0x4d1 has been reserved system 00:07: ioport range 0x4d6-0x4d6 has been reserved system 00:07: ioport range 0x680-0x6ff has been reserved system 00:07: ioport range 0x77a-0x77a has been reserved system 00:07: ioport range 0xc00-0xc01 has been reserved system 00:07: ioport range 0xc14-0xc14 has been reserved system 00:07: ioport range 0xc50-0xc52 has been reserved system 00:07: ioport range 0xc6c-0xc6c has been reserved system 00:07: ioport range 0xc6f-0xc6f has been reserved system 00:07: ioport range 0xcd0-0xcdb has been reserved system 00:07: ioport range 0x580-0x59f has been reserved system 00:07: ioport range 0x800-0x804 has been reserved system 00:07: ioport range 0xb00-0xb3f has been reserved system 00:07: ioport range 0xcdc-0xcdf has been reserved pci 0000:03:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x8000-0x8fff pci 0000:00:01.0: MEM window: 0xd2200000-0xd23fffff pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 pci 0000:00:04.0: IO window: 0x7000-0x7fff pci 0000:00:04.0: MEM window: 0xd2100000-0xd21fffff pci 0000:00:04.0: PREFETCH window: disabled pci 0000:00:05.0: PCI bridge, secondary bus 0000:03 pci 0000:00:05.0: IO window: 0x6000-0x6fff pci 0000:00:05.0: MEM window: 0xb0000000-0xb00fffff pci 0000:00:05.0: PREFETCH window: 0x000000d0000000-0x000000d00fffff pci 0000:00:06.0: PCI bridge, secondary bus 0000:04 pci 0000:00:06.0: IO window: 0x2000-0x5fff pci 0000:00:06.0: MEM window: 0xd1100000-0xd20fffff pci 0000:00:06.0: PREFETCH window: 0x000000d0100000-0x000000d10fffff pci 0000:00:14.4: PCI bridge, secondary bus 0000:0a pci 0000:00:14.4: IO window: disabled pci 0000:00:14.4: MEM window: disabled pci 0000:00:14.4: PREFETCH window: disabled pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:04.0: can't derive routing for PCI INT A pci 0000:00:04.0: PCI INT A: no GSI pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:05.0: can't derive routing for PCI INT A pci 0000:00:05.0: PCI INT A: no GSI pci 0000:00:05.0: setting latency timer to 64 pci 0000:00:06.0: can't derive routing for PCI INT A pci 0000:00:06.0: PCI INT A: no GSI pci 0000:00:06.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x8000-0x8fff] pci_bus 0000:01: resource 1 mem: [0xd2200000-0xd23fffff] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff] pci_bus 0000:02: resource 0 io: [0x7000-0x7fff] pci_bus 0000:02: resource 1 mem: [0xd2100000-0xd21fffff] pci_bus 0000:03: resource 0 io: [0x6000-0x6fff] pci_bus 0000:03: resource 1 mem: [0xb0000000-0xb00fffff] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xd00fffff] pci_bus 0000:04: resource 0 io: [0x2000-0x5fff] pci_bus 0000:04: resource 1 mem: [0xd1100000-0xd20fffff] pci_bus 0000:04: resource 2 pref mem [0xd0100000-0xd10fffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... Freeing initrd memory: 618k freed Simple Boot Flag at 0x44 set to 0x1 Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1260836008.740:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 5518 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:05.0: Boot video device pcieport-driver 0000:00:04.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:04.0: setting latency timer to 64 pcieport-driver 0000:00:05.0: irq 26 for MSI/MSI-X pcieport-driver 0000:00:05.0: setting latency timer to 64 pcieport-driver 0000:00:06.0: irq 27 for MSI/MSI-X pcieport-driver 0000:00:06.0: setting latency timer to 64 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 484k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: can't derive routing for PCI INT A ahci 0000:00:11.0: PCI INT A: no GSI - using IRQ 11 ahci 0000:00:11.0: irq 28 for MSI/MSI-X ahci 0000:00:11.0: implemented port map (0x3f) contains more ports than nr_ports (3), using nr_ports ahci 0000:00:11.0: forcing PORTS_IMPL to 0x7 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m1024@0xd2408000 port 0xd2408100 irq 28 ata2: SATA max UDMA/133 abar m1024@0xd2408000 port 0xd2408180 irq 28 ata3: SATA max UDMA/133 abar m1024@0xd2408000 port 0xd2408200 irq 28 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: HL-DT-ST DVDRAM GT20F, ET10, max UDMA/133, ATAPI AN ata3.00: configured for UDMA/133 ata2.00: ATA-8: WDC WD3200BEVT-26ZCT0, 12.01A12, max UDMA/133 ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 12.0 PQ: 0 ANSI: 5 scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT20F ET10 PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 1:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds rtc_cmos 00:04: RTC can wake from S4 udev: starting version 146 ACPI: processor limited to max C-state 1 processor LNXCPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) processor LNXCPU:01: registered as cooling_device1 powernow-k8: Found 1 AMD Athlon(tm) II Dual-Core M300 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : pstate 0 (2000 MHz) powernow-k8: 1 : pstate 1 (1400 MHz) powernow-k8: 2 : pstate 2 (800 MHz) sd 1:0:0:0: Attached scsi generic sg0 type 0 sr 2:0:0:0: Attached scsi generic sg1 type 5 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 ACPI Error (psargs-0359): [^^^AGP_.VGA_.DOSA] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LID_._LID] (Node ffff8800af8128a0), AE_NOT_FOUND ACPI: Lid Switch [LID] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0 shpchp 0000:00:01.0: Cannot reserve MMIO region shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 rtl8187se: module is from the staging directory, the quality is unknown, you have been warned. ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'TKIP' ieee80211_crypt: registered algorithm 'CCMP' ieee80211_crypt: registered algorithm 'WEP' Linux kernel driver for RTL8180 / RTL8185 based WLAN cards Copyright (c) 2004-2005, Andrea Merello r8180: Initializing module r8180: Wireless extensions version 22 r8180: Initializing proc filesystem r8180: Configuring chip resources pcieport-driver 0000:00:04.0: can't derive routing for PCI INT A r8180 0000:02:00.0: PCI INT A: no GSI - using IRQ 5 r8180 0000:02:00.0: setting latency timer to 64 piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded pcieport-driver 0000:00:05.0: can't derive routing for PCI INT A r8169 0000:03:00.0: PCI INT A: no GSI - using IRQ 4 r8169 0000:03:00.0: setting latency timer to 64 r8169 0000:03:00.0: irq 29 for MSI/MSI-X eth0: RTL8102e at 0xffffc900012e2000, 00:1e:33:f6:a1:ed, XID 24c00000 IRQ 29 rtl8180_init:Error channel plan! Set to default. r8180: Channel plan is 0 Dot11d_Init() r8180: MAC controller is a RTL8187SE b/g r8180: This is a PCI NIC r8180: usValue is 0x104 r8180: EEPROM version 104 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub r8180: WW:**PLEASE** REPORT SUCCESSFUL/UNSUCCESSFUL TO Realtek! r8180: IRQ 5 r8180: Driver probe completed usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: can't derive routing for PCI INT B ehci_hcd 0000:00:12.2: PCI INT B: no GSI - using IRQ 4 ehci_hcd 0000:00:12.2: setting latency timer to 64 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 4, io mem 0xd2408500 fan PNP0C0B:00: registered as cooling_device2 ACPI: Fan [FAN1] (off) ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:13.2: power state changed by ACPI to D0 ehci_hcd 0000:00:13.2: can't derive routing for PCI INT B ehci_hcd 0000:00:13.2: PCI INT B: no GSI - using IRQ 7 ehci_hcd 0000:00:13.2: setting latency timer to 64 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 7, io mem 0xd2408400 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected EDAC MC: Ver: 2.1.0 Nov 10 2009 EDAC amd64_edac: Ver: 3.2.0 Nov 10 2009 EDAC amd64: This node reports that Memory ECC is currently disabled. EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. Might be a BIOS bug, if BIOS says ECC is enabled Use of the override can cause unknown side effects. amd64_edac: probe of 0000:00:18.2 failed with error -22 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: can't derive routing for PCI INT A ohci_hcd 0000:00:12.0: PCI INT A: no GSI - using IRQ 5 ohci_hcd 0000:00:12.0: setting latency timer to 64 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 5, io mem 0xd2407000 ACPI Exception: AE_OK, No or invalid critical threshold 20090521 thermal-384 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:00:12.1: can't derive routing for PCI INT A ohci_hcd 0000:00:12.1: PCI INT A: no GSI - using IRQ 5 ohci_hcd 0000:00:12.1: setting latency timer to 64 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 5, io mem 0xd2406000 rtc_cmos 00:04: RTC can wake from S4 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:00:13.0: can't derive routing for PCI INT A ohci_hcd 0000:00:13.0: PCI INT A: no GSI - using IRQ 10 ohci_hcd 0000:00:13.0: setting latency timer to 64 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 10, io mem 0xd2405000 [drm] Initialized drm 1.1.0 20060810 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected ohci_hcd 0000:00:13.1: can't derive routing for PCI INT A ohci_hcd 0000:00:13.1: PCI INT A: no GSI - using IRQ 10 ohci_hcd 0000:00:13.1: setting latency timer to 64 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 10, io mem 0xd2404000 pci 0000:00:01.0: can't derive routing for PCI INT A pci 0000:01:05.0: PCI INT A: no GSI - using IRQ 10 pci 0000:01:05.0: setting latency timer to 64 [drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0 ACPI Error (psargs-0359): [BUF_] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.AGP_.VGA_._DOD] (Node ffff8800af811540), AE_NOT_FOUND ACPI Exception: AE_NOT_FOUND, Evaluating _DOD 20090521 video-1851 ACPI Error (psargs-0359): [_hij] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.AGP_.VGA_.LCD_._BCL] (Node ffff8800af8116c0), AE_NOT_FOUND BUG: unable to handle kernel NULL pointer dereference at 000000000000000a IP: [] acpi_ds_create_operand+0x25/0x230 PGD ae204067 PUD acd31067 PMD 0 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/module/video/initstate CPU 1 Modules linked in: video(+) output radeon ttm drm i2c_algo_bit thermal ohci_hcd(+) amd64_edac_mod edac_core fan ehci_hcd usbcore r8169 mii i2c_piix4 i2c_core rtl8187se(C) shpchp pci_hotplug button sg battery evdev ac powernow_k8 freq_table processor rtc_core rtc_lib ext3 jbd mbcache sr_mod cdrom sd_mod ahci libata scsi_mod Pid: 1422, comm: modprobe Tainted: G C 2.6.31-ARCH #1 Satellite L505D RIP: 0010:[] [] acpi_ds_create_operand+0x25/0x230 RSP: 0018:ffff8800acd19a18 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8800ac066000 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8800ac066000 RBP: ffff8800ac066000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff880037d53960 R11: 000000006bf995c9 R12: 0000000000000000 R13: 0000000000000012 R14: 0000000000000001 R15: ffff8800ac066084 FS: 00007fd3baa1c700(0000) GS:ffff8800016be000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000000000a CR3: 00000000ae188000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 1422, threadinfo ffff8800acd18000, task ffff8800aedc70a0) Stack: 0000000000000000 000000006bf995c9 ffff880037d53960 ffff880037d53960 <0> 0000000000000000 000000006bf995c9 ffff8800ac066000 ffff8800acea9360 <0> 0000000000000000 0000000000000012 ffff8800acd19b30 ffffffff8123be5f Call Trace: [] ? acpi_ds_eval_data_object_operands+0x39/0x117 [] ? acpi_ds_exec_end_op+0x28b/0x3f1 [] ? acpi_ps_parse_loop+0x777/0x876 [] ? acpi_ps_parse_aml+0xa2/0x2e9 [] ? acpi_ps_execute_method+0x1d5/0x2b6 [] ? acpi_ns_evaluate+0xed/0x1c4 [] ? acpi_evaluate_object+0x1de/0x2f6 [] ? acpi_video_bus_DOS+0x6b/0x8d [video] [] ? acpi_video_bus_add+0x427/0x589 [video] [] ? acpi_device_probe+0x56/0x16a [] ? driver_probe_device+0xa8/0x1a0 [] ? __driver_attach+0xc3/0xd0 [] ? __driver_attach+0x0/0xd0 [] ? bus_for_each_dev+0x68/0xb0 [] ? bus_add_driver+0xda/0x2f0 [] ? driver_register+0x7a/0x150 [] ? proc_mkdir_mode+0x4c/0x80 [] ? acpi_video_register+0x50/0x94 [video] [] ? acpi_video_init+0x8b/0x99 [video] [] ? acpi_video_init+0x0/0x99 [video] [] ? do_one_initcall+0x45/0x1d0 [] ? sys_init_module+0x105/0x260 [] ? system_call_fastpath+0x16/0x1b Code: e1 ff 59 5b 5b c3 41 56 41 89 d6 41 55 41 54 49 89 f4 55 48 89 fd 53 48 83 ec 30 65 48 8b 04 25 28 00 00 00 48 89 44 24 28 31 c0 <66> 44 8b 6e 0a 66 41 83 fd 2d 0f 85 1f 01 00 00 48 83 7e 20 00 RIP [] acpi_ds_create_operand+0x25/0x230 RSP CR2: 000000000000000a ---[ end trace ce8a35a7d9aad061 ]--- usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected HDA Intel 0000:00:14.2: can't derive routing for PCI INT A HDA Intel 0000:00:14.2: PCI INT A: no GSI - using IRQ 5 HDA Intel 0000:00:14.2: setting latency timer to 64 usb 3-3: new low speed USB device using ohci_hcd and address 2 hda_codec: Unknown model for ALC272, trying auto-probe from BIOS... input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input4 pci 0000:00:01.0: can't derive routing for PCI INT B HDA Intel 0000:01:05.1: PCI INT B: no GSI - using IRQ 7 HDA Intel 0000:01:05.1: setting latency timer to 64 usb 3-3: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Primax Electronics Dynex Wireless Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input5 generic-usb 0003:0461:4D4C.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [Primax Electronics Dynex Wireless Optical Mouse] on usb-0000:00:12.0-3/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver EXT3 FS on sda3, internal journal