Linux version 2.6.32-rc6-git3 (root@frodo) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #2 SMP Fri Nov 6 11:18:43 EET 2009 Command line: root=/dev/sda7 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bdab1000 (usable) BIOS-e820: 00000000bdab1000 - 00000000bdab7000 (reserved) BIOS-e820: 00000000bdab7000 - 00000000bdbbc000 (usable) BIOS-e820: 00000000bdbbc000 - 00000000bdc0f000 (reserved) BIOS-e820: 00000000bdc0f000 - 00000000bdd08000 (usable) BIOS-e820: 00000000bdd08000 - 00000000bdf0f000 (reserved) BIOS-e820: 00000000bdf0f000 - 00000000bdf18000 (usable) BIOS-e820: 00000000bdf18000 - 00000000bdf1f000 (reserved) BIOS-e820: 00000000bdf1f000 - 00000000bdf64000 (usable) BIOS-e820: 00000000bdf64000 - 00000000bdf9f000 (ACPI NVS) BIOS-e820: 00000000bdf9f000 - 00000000bdfe3000 (usable) BIOS-e820: 00000000bdfe3000 - 00000000bdffd000 (ACPI data) BIOS-e820: 00000000bdffd000 - 00000000be000000 (usable) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) DMI present. last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 100000000 mask FC0000000 write-back 3 base 0FFE00000 mask FFFF80000 write-protect 4 disabled 5 disabled 6 disabled original variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 4GB, range: 1GB, type WB reg 3, base: 4094MB, range: 512KB, type WP total RAM covered: 4096M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 64K num_reg: 3 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 4GB, range: 1GB, type WB e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xbe000 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000be000000 0000000000 - 00be000000 page 2M kernel direct mapping tables up to be000000 @ 8000-c000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ a000-10000 ACPI: RSDP 00000000000f6750 00024 (v02 TOSCPL) ACPI: XSDT 00000000bdff45c4 00064 (v01 TOSCPL TOSCPL00 06040000 LTP 00000000) ACPI: FACP 00000000bdfe5000 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001) ACPI: DSDT 00000000bdfe6000 0854C (v02 Intel CANTIGA 06040000 INTL 20060608) ACPI: FACS 00000000bdf9efc0 00040 ACPI: HPET 00000000bdffcd14 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: MCFG 00000000bdffcd4c 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: SLIC 00000000bdffcd88 00176 (v01 TOSCPL TOSCPL00 06040000 LOHR 00000000) ACPI: OSFR 00000000bdffcefe 00072 (v01 TOSHIB A+2nd ID 06040000 TASM 04010000) ACPI: APIC 00000000bdffcf70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) ACPI: BOOT 00000000bdffcfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) ACPI: SSDT 00000000bdfe4000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 0140000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 000159404c] TEXT DATA BSS ==> [0001000000 - 000159404c] #3 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] #4 [0001595000 - 00015951c4] BRK ==> [0001595000 - 00015951c4] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] #6 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node early_node_map[9] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bdab1 0: 0x000bdab7 -> 0x000bdbbc 0: 0x000bdc0f -> 0x000bdd08 0: 0x000bdf0f -> 0x000bdf18 0: 0x000bdf1f -> 0x000bdf64 0: 0x000bdf9f -> 0x000bdfe3 0: 0x000bdffd -> 0x000be000 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1039587 DMA zone: 56 pages used for memmap DMA zone: 102 pages reserved DMA zone: 3841 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 759164 pages, LIFO batch:31 Normal zone: 3584 pages used for memmap Normal zone: 258560 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 PM: Registered nosave memory: 00000000000d4000 - 00000000000d8000 PM: Registered nosave memory: 00000000000d8000 - 0000000000100000 PM: Registered nosave memory: 00000000bdab1000 - 00000000bdab7000 PM: Registered nosave memory: 00000000bdbbc000 - 00000000bdc0f000 PM: Registered nosave memory: 00000000bdd08000 - 00000000bdf0f000 PM: Registered nosave memory: 00000000bdf18000 - 00000000bdf1f000 PM: Registered nosave memory: 00000000bdf64000 - 00000000bdf9f000 PM: Registered nosave memory: 00000000bdfe3000 - 00000000bdffd000 PM: Registered nosave memory: 00000000be000000 - 0000000100000000 Allocating PCI resources starting at be000000 (gap: be000000:42000000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff880028200000 s71192 r8192 d23016 u1048576 pcpu-alloc: s71192 r8192 d23016 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1021565 Kernel command line: root=/dev/sda7 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Initializing CPU#0 xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 Checking aperture... No AGP bridge found PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 4021788k/5242880k available (3404k kernel code, 1084532k absent, 135600k reserved, 1451k data, 364k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:512 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 2526.868 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.73 BogoMIPS (lpj=2526868) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20090903 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5053.73 BogoMIPS (lpj=2526866) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (10107.46 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f] pci 0000:00:1a.2: reg 20 io port: [0x1840-0x185f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf2504800-0xf2504bff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xf2500000-0xf2503fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf2504c00-0xf2504fff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0x18f0-0x18f7] pci 0000:00:1f.2: reg 14 io port: [0x18e4-0x18e7] pci 0000:00:1f.2: reg 18 io port: [0x18e8-0x18ef] pci 0000:00:1f.2: reg 1c io port: [0x18e0-0x18e3] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18df] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf2504000-0xf25047ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xc0000000-0xdfffffff] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff] pci 0000:01:00.0: reg 18 32bit mmio: [0xbfef0000-0xbfefffff] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10 32bit mmio: [0xbfeec000-0xbfeeffff] pci 0000:01:00.1: supports D1 D2 pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] pci 0000:00:01.0: bridge 32bit mmio: [0xbfe00000-0xbfefffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff] pci 0000:00:1c.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff] pci 0000:0e:00.0: reg 10 io port: [0x4000-0x40ff] pci 0000:0e:00.0: reg 18 64bit mmio pref: [0xf2010000-0xf2010fff] pci 0000:0e:00.0: reg 20 64bit mmio pref: [0xf2000000-0xf200ffff] pci 0000:0e:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:0e:00.0: supports D1 D2 pci 0000:0e:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0e:00.0: PME# disabled pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf2000000-0xf20fffff] pci 0000:14:00.0: reg 10 64bit mmio: [0xf2100000-0xf2101fff] pci 0000:14:00.0: PME# supported from D0 D3hot D3cold pci 0000:14:00.0: PME# disabled pci 0000:00:1c.3: bridge 32bit mmio: [0xf2100000-0xf21fffff] pci 0000:20:00.0: reg 10 32bit mmio: [0xf2200000-0xf22007ff] pci 0000:20:00.0: reg 14 32bit mmio: [0xf2201000-0xf220107f] pci 0000:20:00.0: reg 20 32bit mmio: [0xf2200c00-0xf2200c7f] pci 0000:20:00.0: reg 24 32bit mmio: [0xf2200800-0xf220087f] pci 0000:20:00.1: reg 10 32bit mmio: [0xf2201400-0xf22014ff] pci 0000:20:00.2: reg 10 32bit mmio: [0xf2201800-0xf22018ff] pci 0000:20:00.3: reg 10 32bit mmio: [0xf2201c00-0xf2201cff] pci 0000:20:00.4: reg 10 32bit mmio: [0xf2202000-0xf22020ff] pci 0000:00:1c.5: bridge 32bit mmio: [0xf2200000-0xf22fffff] pci 0000:00:1e.0: transparent bridge pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered system 00:02: iomem range 0xfed00000-0xfed003ff has been reserved system 00:04: ioport range 0x480-0x48f has been reserved system 00:04: ioport range 0xffff-0xffff has been reserved system 00:04: ioport range 0xffff-0xffff has been reserved system 00:04: ioport range 0x400-0x47f has been reserved system 00:04: ioport range 0x1180-0x11ff has been reserved system 00:04: ioport range 0xfe00-0xfe00 has been reserved system 00:04: ioport range 0xff2c-0xff7f has been reserved system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:08: iomem range 0xfed10000-0xfed13fff has been reserved system 00:08: iomem range 0xfed18000-0xfed18fff has been reserved system 00:08: iomem range 0xfed19000-0xfed19fff has been reserved system 00:08: iomem range 0xe0000000-0xefffffff has been reserved system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:08: iomem range 0xfed40000-0xfed44fff has been reserved system 00:08: iomem range 0xfed45000-0xfed8ffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x2000-0x2fff pci 0000:00:01.0: MEM window: 0xbfe00000-0xbfefffff pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x3000-0x3fff pci 0000:00:1c.0: MEM window: 0xf4000000-0xf5ffffff pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:0e pci 0000:00:1c.2: IO window: 0x4000-0x4fff pci 0000:00:1c.2: MEM window: 0xf2600000-0xf29fffff pci 0000:00:1c.2: PREFETCH window: 0x000000f2000000-0x000000f20fffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:14 pci 0000:00:1c.3: IO window: 0x5000-0x5fff pci 0000:00:1c.3: MEM window: 0xf2100000-0xf21fffff pci 0000:00:1c.3: PREFETCH window: 0x000000f2300000-0x000000f24fffff pci 0000:00:1c.5: PCI bridge, secondary bus 0000:20 pci 0000:00:1c.5: IO window: 0x6000-0x6fff pci 0000:00:1c.5: MEM window: 0xf2200000-0xf22fffff pci 0000:00:1c.5: PREFETCH window: 0x000000f2a00000-0x000000f2bfffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:26 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] pci_bus 0000:01: resource 1 mem: [0xbfe00000-0xbfefffff] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xdfffffff] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] pci_bus 0000:02: resource 1 mem: [0xf4000000-0xf5ffffff] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff] pci_bus 0000:0e: resource 0 io: [0x4000-0x4fff] pci_bus 0000:0e: resource 1 mem: [0xf2600000-0xf29fffff] pci_bus 0000:0e: resource 2 pref mem [0xf2000000-0xf20fffff] pci_bus 0000:14: resource 0 io: [0x5000-0x5fff] pci_bus 0000:14: resource 1 mem: [0xf2100000-0xf21fffff] pci_bus 0000:14: resource 2 pref mem [0xf2300000-0xf24fffff] pci_bus 0000:20: resource 0 io: [0x6000-0x6fff] pci_bus 0000:20: resource 1 mem: [0xf2200000-0xf22fffff] pci_bus 0000:20: resource 2 pref mem [0xf2a00000-0xf2bfffff] pci_bus 0000:26: resource 3 io: [0x00-0xffff] pci_bus 0000:26: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device Simple Boot Flag at 0x36 set to 0x80 msgmni has been set to 7856 alg: No test for stdrng (krng) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:01.0: irq 24 for MSI/MSI-X pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X pcieport 0000:00:1c.3: setting latency timer to 64 pcieport 0000:00:1c.5: irq 28 for MSI/MSI-X pcieport 0000:00:1c.5: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 ACPI: AC Adapter [ACAD] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: SSDT 00000000bdf1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT 00000000bdf18620 005A3 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet processor LNXCPU:00: registered as cooling_device0 ACPI: SSDT 00000000bdf19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) ACPI: SSDT 00000000bdf19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) processor LNXCPU:01: registered as cooling_device1 Switched to NOHz mode on CPU #1 Switched to NOHz mode on CPU #0 Linux agpgart interface v0.103 loop: module loaded ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: irq 29 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504100 irq 29 ata2: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504180 irq 29 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504300 irq 29 ata6: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504380 irq 29 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: Battery Slot [BAT1] (battery absent) ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf2504800 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf2504c00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 17 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 ata6: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-8: Hitachi HTS543232L9SA00, FB4OC43C, max UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54323 FB4O PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: usb 1-1: new high speed USB device using ehci_hcd and address 2 ata5.00: ATAPI: TSSTcorp CDDVDW TS-L633A, TO01, max UDMA/100, ATAPI AN sda1 sda2 sda3 sda4 < ata5.00: configured for UDMA/100 scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A TO01 PQ: 0 ANSI: 5 sda5sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sda6 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk usb 1-1: configuration #1 chosen from 2 choices usb 1-6: new high speed USB device using ehci_hcd and address 3 usb 1-6: configuration #1 chosen from 1 choice input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input4 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input5 rtc_cmos 00:05: setting system clock to 2009-11-06 11:31:47 UTC (1257507107) EXT4-fs (sda7): mounted filesystem with ordered data mode VFS: Mounted root (ext4 filesystem) readonly on device 8:7. Freeing unused kernel memory: 364k freed usb 6-1: new low speed USB device using uhci_hcd and address 2 usb 6-1: configuration #1 chosen from 1 choice input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input6 generic-usb 0003:045E:00CB.0001: input: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1d.0-1/input0 udev: starting version 141 cdc_acm 1-1:1.1: ttyACM0: USB ACM device cdc_acm 1-1:1.3: ttyACM1: USB ACM device cdc_acm 1-1:1.9: ttyACM2: USB ACM device usbcore: registered new interface driver cdc_acm cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman jmb38x_ms 0000:20:00.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17 jmb38x_ms 0000:20:00.3: setting latency timer to 64 sdhci-pci 0000:20:00.1: SDHCI controller found [197b:2382] (rev 0) sdhci-pci 0000:20:00.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 sdhci-pci 0000:20:00.1: setting latency timer to 64 mmc0: SDHCI controller on PCI [0000:20:00.1] using DMA sdhci-pci 0000:20:00.2: SDHCI controller found [197b:2381] (rev 0) sdhci-pci 0000:20:00.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17 sdhci-pci 0000:20:00.2: Refusing to bind to secondary interface. sdhci-pci 0000:20:00.2: PCI INT A disabled Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008) i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:14:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 iwlagn 0000:14:00.0: setting latency timer to 64 iwlagn 0000:14:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 iwlagn 0000:14:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:14:00.0: irq 30 for MSI/MSI-X phy0: Selected rate control algorithm 'iwl-agn-rs' r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:0e:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:0e:00.0: setting latency timer to 64 r8169 0000:0e:00.0: irq 31 for MSI/MSI-X eth0: RTL8102e at 0xffffc90000072000, 00:23:5a:f8:f2:cb, XID 14a00000 IRQ 31 firewire_ohci 0000:20:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 firewire_ohci 0000:20:00.0: setting latency timer to 64 firewire_ohci: Added fw-ohci device 0000:20:00.0, OHCI version 1.10 firewire_core: created device fw0: GUID 00023f97e0400195, S400 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: ALC272: BIOS auto-probing. input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 hda-codec: No codec parser is available HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:01:00.1: setting latency timer to 64 hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000 hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x000f0001 hda-intel: no codecs initialized HDA Intel 0000:01:00.1: PCI INT B disabled Adding 7815580k swap on /dev/sda6. Priority:-1 extents:1 across:7815580k r8169: eth0: link down iwlagn 0000:14:00.0: firmware: requesting iwlwifi-5000-2.ucode iwlagn 0000:14:00.0: loaded firmware version 8.24.2.12 wlan0: deauthenticating from 00:12:bf:1c:7c:f9 by local choice (reason=3) wlan0: direct probe to AP 00:12:bf:1c:7c:f9 (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:12:bf:1c:7c:f9 (try 1) wlan0: authenticated wlan0: associate with AP 00:12:bf:1c:7c:f9 (try 1) wlan0: RX AssocResp from 00:12:bf:1c:7c:f9 (capab=0x421 status=0 aid=14) wlan0: associated [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to userspace modesetting. pci 0000:01:00.0: power state changed by ACPI to D0 pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:01:00.0: setting latency timer to 64 [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0 wlan0: deauthenticating from 00:12:bf:1c:7c:f9 by local choice (reason=3) wlan0: direct probe to AP 00:12:bf:1c:7c:f9 (try 1) wlan0: deauthenticating from 00:12:bf:1c:7c:f9 by local choice (reason=3) wlan0: deauthenticating from 00:12:bf:1c:81:7e by local choice (reason=3) wlan0: direct probe to AP 00:12:bf:1c:81:7e (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:12:bf:1c:81:7e (try 1) wlan0: authenticated wlan0: associate with AP 00:12:bf:1c:81:7e (try 1) wlan0: RX AssocResp from 00:12:bf:1c:81:7e (capab=0x421 status=0 aid=14) wlan0: associated wlan0: deauthenticating from 00:12:bf:1c:81:7e by local choice (reason=3) wlan0: deauthenticating from 00:12:bf:1c:81:7e by local choice (reason=3)