[ 0.000000] Linux version 2.6.31.5-0.1-desktop (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP PREEMPT 2009-10-26 15:49:03 +0100 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fedf800 (usable) [ 0.000000] BIOS-e820: 000000003fedf800 - 000000003fee0000 (reserved) [ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3fedf max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fedf800 (usable) [ 0.000000] modified: 000000003fedf800 - 000000003fee0000 (reserved) [ 0.000000] modified: 000000003fee0000 - 000000003fee3000 (ACPI NVS) [ 0.000000] modified: 000000003fee3000 - 000000003fef0000 (ACPI data) [ 0.000000] modified: 000000003fef0000 - 000000003ff00000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 01000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000036ffe000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0036e00000 page 2M [ 0.000000] 0036e00000 - 0036ffe000 page 4k [ 0.000000] kernel direct mapping tables up to 36ffe000 @ 10000-1b000 [ 0.000000] RAMDISK: 378c7000 - 37fef30a [ 0.000000] Allocated new RAMDISK: 00af7000 - 0121f30a [ 0.000000] Move RAMDISK from 00000000378c7000 - 0000000037fef309 to 00af7000 - 0121f309 [ 0.000000] ACPI: RSDP 000f7fe0 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 3fee30c0 00054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 3fee7940 000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 3fee3280 04671 (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 3fee0000 00040 [ 0.000000] ACPI: SLIC 3fee7b80 00176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: HPET 3fee7d40 00038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 3fee7dc0 0003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 3fee7a80 00084 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 3fee8320 00304 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] could not find any ACPI SRAT memory areas. [ 0.000000] failed to get NUMA memory information from SRAT table [ 0.000000] NUMA - single node, flat memory mode [ 0.000000] Node: 0, start_pfn: 0, end_pfn: 3fedf [ 0.000000] Setting physnode_map array to node 0 for pfns: [ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 [ 0.000000] node 0 pfn: [0 - 3fedf] [ 0.000000] Reserving 2048 pages of KVA for lmem_map of node 0 at 3f600 [ 0.000000] remove_active_range (0, 259584, 261632) [ 0.000000] Reserving total of 800 pages for numa KVA remap [ 0.000000] kva_start_pfn ~ 36600 max_low_pfn ~ 36ffe [ 0.000000] max_pfn = 3fedf [ 0.000000] 142MB HIGHMEM available. [ 0.000000] 879MB LOWMEM available. [ 0.000000] max_low_pfn = 36ffe, highstart_pfn = 36ffe [ 0.000000] Low memory ends at vaddr f6ffe000 [ 0.000000] node 0 will remap to vaddr f6600000 - f6e00000 [ 0.000000] allocate_pgdat: node 0 NODE_DATA f6600000 [ 0.000000] remap_numa_kva: node 0 [ 0.000000] remap_numa_kva: f6600000 to pfn 0003f600 [ 0.000000] remap_numa_kva: f6800000 to pfn 0003f800 [ 0.000000] remap_numa_kva: f6a00000 to pfn 0003fa00 [ 0.000000] remap_numa_kva: f6c00000 to pfn 0003fc00 [ 0.000000] High memory starts at vaddr f6ffe000 [ 0.000000] mapped low ram: 0 - 36ffe000 [ 0.000000] low ram: 0 - 36ffe000 [ 0.000000] node 0 low ram: 00000000 - 36ffe000 [ 0.000000] node 0 bootmap 00018000 - 0001ee00 [ 0.000000] (11 early reservations) ==> bootmem [0000000000 - 0036ffe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000200000 - 0000aeda90] TEXT DATA BSS ==> [0000200000 - 0000aeda90] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [0000aee000 - 0000af65e4] BRK ==> [0000aee000 - 0000af65e4] [ 0.000000] #6 [0000010000 - 0000018000] PGTABLE ==> [0000010000 - 0000018000] [ 0.000000] #7 [0000af7000 - 000121f30a] NEW RAMDISK ==> [0000af7000 - 000121f30a] [ 0.000000] #8 [003f600000 - 003fe00000] KVA RAM [ 0.000000] #9 [0036600000 - 0036e00000] KVA PG ==> [0036600000 - 0036e00000] [ 0.000000] #10 [0000018000 - 000001f000] BOOTMAP ==> [0000018000 - 000001f000] [ 0.000000] found SMP MP-table at [c00f5c10] f5c10 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00036ffe [ 0.000000] HighMem 0x00036ffe -> 0x0003fedf [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f600 [ 0.000000] 0: 0x0003fe00 -> 0x0003fedf [ 0.000000] On node 0 totalpages: 259694 [ 0.000000] free_area_init_node: node 0, pgdat f6600000, node_mem_map c1220200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 219454 pages, LIFO batch:31 [ 0.000000] HighMem zone: 286 pages used for memmap [ 0.000000] HighMem zone: 34243 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:b0100000) [ 0.000000] NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:8 [ 0.000000] PERCPU: Embedded 14 pages at c1a25000, static data 34204 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257648 [ 0.000000] Policy zone: HighMem [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-Hitachi_HDT725032VLA380_VFJ201R23XUEXW-part5 maxcpus=1 resume=/dev/disk/by-id/ata-Hitachi_HDT725032VLA380_VFJ201R23XUEXW-part1 splash=silent quiet vga=0x31a [ 0.000000] bootsplash: silent mode. [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00036ffe:0003fedf) [ 0.000000] Memory: 1004796k/1047420k available (4719k kernel code, 33980k reserved, 2944k data, 464k init, 138116k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xff5b5000 - 0xfffff000 (10536 kB) [ 0.000000] pkmap : 0xff000000 - 0xff200000 (2048 kB) [ 0.000000] vmalloc : 0xf77fe000 - 0xfeffe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf6ffe000 ( 879 MB) [ 0.000000] .init : 0xc097d000 - 0xc09f1000 ( 464 kB) [ 0.000000] .data : 0xc069bd42 - 0xc097c008 (2944 kB) [ 0.000000] .text : 0xc0200000 - 0xc069bd42 (4719 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1600.426 MHz processor. [ 0.000116] Console: colour dummy device 80x25 [ 0.000121] console [tty0] enabled [ 0.000347] hpet clockevent registered [ 0.000351] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000359] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.85 BogoMIPS (lpj=1600426) [ 0.032017] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved [ 0.032128] Security Framework initialized [ 0.032147] AppArmor: AppArmor initialized [ 0.032174] Mount-cache hash table entries: 512 [ 0.033116] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.033120] CPU: L2 cache: 1024K [ 0.033124] CPU: Physical Processor ID: 0 [ 0.033126] CPU: Processor Core ID: 0 [ 0.033131] mce: CPU supports 6 MCE banks [ 0.033141] CPU0: Thermal monitoring enabled (TM2) [ 0.033146] using mwait in idle threads. [ 0.033153] Performance Counters: Core2 events, Intel PMU driver. [ 0.033159] ... version: 2 [ 0.033162] ... bit width: 40 [ 0.033164] ... generic counters: 2 [ 0.033167] ... value mask: 000000ffffffffff [ 0.033170] ... max period: 000000007fffffff [ 0.033172] ... fixed-purpose counters: 3 [ 0.033175] ... counter mask: 0000000700000003 [ 0.033181] Checking 'hlt' instruction... OK. [ 0.037750] SMP alternatives: switching to UP code [ 0.046733] ACPI: Core revision 20090521 [ 0.059225] Mapping cpu 0 to node 0 [ 0.059401] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.071161] CPU0: Genuine Intel(R) CPU 2140 @ 1.60GHz stepping 02 [ 0.071989] Brought up 1 CPUs [ 0.072001] Total of 1 processors activated (3200.85 BogoMIPS). [ 0.072076] CPU0 attaching NULL sched-domain. [ 0.072203] devtmpfs: initialized [ 0.072382] Booting paravirtualized kernel on bare hardware [ 0.072641] regulator: core version 0.5 [ 0.072669] Time: 15:53:05 Date: 11/03/09 [ 0.072746] NET: Registered protocol family 16 [ 0.073084] ACPI: bus type pci registered [ 0.073170] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.073175] PCI: MCFG area at f0000000 reserved in E820 [ 0.073177] PCI: Using MMCONFIG for extended config space [ 0.073180] PCI: Using configuration type 1 for base access [ 0.075088] bio: create slab at 0 [ 0.078210] ACPI: EC: Look up EC in DSDT [ 0.090288] ACPI: Interpreter enabled [ 0.090300] ACPI: (supports S0 S1 S3 S4 S5) [ 0.090347] ACPI: Using IOAPIC for interrupt routing [ 0.098644] ACPI: No dock devices found. [ 0.098797] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.098941] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.098946] pci 0000:00:01.0: PME# disabled [ 0.099027] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff] [ 0.099076] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.099081] pci 0000:00:1b.0: PME# disabled [ 0.100050] pci 0000:00:1d.0: reg 20 io port: [0xff00-0xff1f] [ 0.100115] pci 0000:00:1d.1: reg 20 io port: [0xfe00-0xfe1f] [ 0.100170] pci 0000:00:1d.2: reg 20 io port: [0xfd00-0xfd1f] [ 0.100226] pci 0000:00:1d.3: reg 20 io port: [0xfc00-0xfc1f] [ 0.100279] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff] [ 0.100332] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.100338] pci 0000:00:1d.7: PME# disabled [ 0.100527] pci 0000:00:1f.2: reg 10 io port: [0xfb00-0xfb07] [ 0.100534] pci 0000:00:1f.2: reg 14 io port: [0xfa00-0xfa03] [ 0.100542] pci 0000:00:1f.2: reg 18 io port: [0xf900-0xf907] [ 0.100549] pci 0000:00:1f.2: reg 1c io port: [0xf800-0xf803] [ 0.100557] pci 0000:00:1f.2: reg 20 io port: [0xf700-0xf70f] [ 0.100565] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffe000-0xfdffe3ff] [ 0.100594] pci 0000:00:1f.2: PME# supported from D3hot [ 0.100599] pci 0000:00:1f.2: PME# disabled [ 0.100652] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.100715] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.100726] pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff] [ 0.100737] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff] [ 0.100748] pci 0000:01:00.0: reg 30 32bit mmio: [0xfcfe0000-0xfcffffff] [ 0.100790] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.100856] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfcffffff] [ 0.100863] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.101032] pci 0000:02:01.0: reg 10 32bit mmio: [0xfdeff000-0xfdefffff] [ 0.101100] pci 0000:02:01.0: supports D1 D2 [ 0.101102] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot [ 0.101108] pci 0000:02:01.0: PME# disabled [ 0.101161] pci 0000:02:04.0: reg 10 32bit mmio: [0xfdefe000-0xfdefe7ff] [ 0.101229] pci 0000:02:04.0: supports D1 D2 [ 0.101281] pci 0000:02:08.0: reg 10 32bit mmio: [0xfdefd000-0xfdefdfff] [ 0.101291] pci 0000:02:08.0: reg 14 io port: [0xef00-0xef3f] [ 0.101351] pci 0000:02:08.0: supports D1 D2 [ 0.101354] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.101359] pci 0000:02:08.0: PME# disabled [ 0.101409] pci 0000:00:1e.0: transparent bridge [ 0.101414] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.101419] pci 0000:00:1e.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.101449] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.101747] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.124211] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.124381] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.124547] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.124712] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.125009] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.125175] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.125347] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.125512] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 *7 9 10 11 12 14 15) [ 0.125788] SCSI subsystem initialized [ 0.125861] libata version 3.00 loaded. [ 0.125959] usbcore: registered new interface driver usbfs [ 0.125990] usbcore: registered new interface driver hub [ 0.126022] usbcore: registered new device driver usb [ 0.126110] PCI: Using ACPI for IRQ routing [ 0.126287] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.126294] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.132346] AppArmor: AppArmor Filesystem Enabled [ 0.132369] pnp: PnP ACPI init [ 0.132390] ACPI: bus type pnp registered [ 0.136070] pnp: PnP ACPI: found 11 devices [ 0.136073] ACPI: ACPI bus type pnp unregistered [ 0.136088] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.136092] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.136097] system 00:01: ioport range 0x294-0x297 has been reserved [ 0.136100] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.136111] system 00:07: ioport range 0x400-0x4bf has been reserved [ 0.136119] system 00:09: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.136127] system 00:0a: iomem range 0xce200-0xcffff has been reserved [ 0.136132] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved [ 0.136136] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved [ 0.136140] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved [ 0.136144] system 00:0a: iomem range 0xfed00000-0xfed000ff has been reserved [ 0.136148] system 00:0a: iomem range 0x3fee0000-0x3fefffff could not be reserved [ 0.136152] system 00:0a: iomem range 0x0-0x9ffff could not be reserved [ 0.136156] system 00:0a: iomem range 0x100000-0x3fedffff could not be reserved [ 0.136160] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.136165] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.136169] system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.136173] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved [ 0.136180] system 00:0a: iomem range 0xe0000-0xeffff has been reserved [ 0.173030] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.173034] pci 0000:00:01.0: IO window: disabled [ 0.173040] pci 0000:00:01.0: MEM window: 0xfa000000-0xfcffffff [ 0.173045] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.173052] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.173056] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.173063] pci 0000:00:1e.0: MEM window: 0xfde00000-0xfdefffff [ 0.173068] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.173082] alloc irq_desc for 16 on node 0 [ 0.173085] alloc kstat_irqs on node 0 [ 0.173094] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.173099] pci 0000:00:01.0: setting latency timer to 64 [ 0.173110] pci 0000:00:1e.0: setting latency timer to 64 [ 0.173115] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.173119] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.173123] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfcffffff] [ 0.173127] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.173131] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.173134] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.173137] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.173141] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.173228] NET: Registered protocol family 2 [ 0.173357] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.173735] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.175286] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.175499] TCP: Hash tables configured (established 131072 bind 65536) [ 0.175502] TCP reno registered [ 0.175716] NET: Registered protocol family 1 [ 0.175805] Unpacking initramfs... [ 0.431254] Freeing initrd memory: 7328k freed [ 0.435962] Scanning for low memory corruption every 60 seconds [ 0.436176] audit: initializing netlink socket (disabled) [ 0.436197] type=2000 audit(1257263575.435:1): initialized [ 0.441360] highmem bounce pool size: 64 pages [ 0.441367] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.441924] VFS: Disk quotas dquot_6.5.2 [ 0.443051] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.443246] msgmni has been set to 426 [ 0.443380] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.443384] io scheduler noop registered [ 0.443387] io scheduler anticipatory registered [ 0.443390] io scheduler deadline registered [ 0.443410] io scheduler cfq registered (default) [ 0.443598] pci 0000:01:00.0: Boot video device [ 0.443615] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling [ 0.443999] alloc irq_desc for 24 on node 0 [ 0.444003] alloc kstat_irqs on node 0 [ 0.444016] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.444026] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.444164] pci-stub: invalid id string "" [ 0.444344] vesafb: framebuffer at 0xe0000000, mapped to 0xf7880000, using 5120k, total 65536k [ 0.444349] vesafb: mode is 1280x1024x16, linelength=2560, pages=1 [ 0.444351] vesafb: protected mode interface info at c000:c6e0 [ 0.444354] vesafb: pmi: set display start = c00cc716, set palette = c00cc780 [ 0.444357] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 0.444376] vesafb: scrolling: redraw [ 0.444380] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.444573] bootsplash 3.1.6-2004/03/31: looking for picture... [ 0.466223] bootsplash: silentjpeg size 130564 bytes [ 0.498419] bootsplash: ...found (1280x1024, 29083 bytes, v3). [ 0.500943] Switched to high resolution mode on CPU 0 [ 0.585749] Console: switching to colour frame buffer device 156x60 [ 0.672506] fb0: VESA VGA frame buffer device [ 0.674507] Non-volatile memory driver v1.3 [ 0.674511] Linux agpgart interface v0.103 [ 0.674542] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.675258] ahci 0000:00:1f.2: version 3.0 [ 0.675278] alloc irq_desc for 19 on node 0 [ 0.675281] alloc kstat_irqs on node 0 [ 0.675291] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.675323] alloc irq_desc for 25 on node 0 [ 0.675325] alloc kstat_irqs on node 0 [ 0.675336] ahci 0000:00:1f.2: irq 25 for MSI/MSI-X [ 0.675410] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 0.675415] ahci 0000:00:1f.2: flags: 64bit ncq ilck led clo [ 0.675420] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.675717] scsi0 : ahci [ 0.675842] scsi1 : ahci [ 0.675916] scsi2 : ahci [ 0.675976] scsi3 : ahci [ 0.676172] ata1: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100 irq 25 [ 0.676177] ata2: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe180 irq 25 [ 0.676181] ata3: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe200 irq 25 [ 0.676185] ata4: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe280 irq 25 [ 0.676303] Fixed MDIO Bus: probed [ 0.676312] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.677045] alloc irq_desc for 23 on node 0 [ 0.677049] alloc kstat_irqs on node 0 [ 0.677060] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.677084] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.677089] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.677141] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.681065] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.681084] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000 [ 0.690015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.690062] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.690067] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.690071] usb usb1: Product: EHCI Host Controller [ 0.690075] usb usb1: Manufacturer: Linux 2.6.31.5-0.1-desktop ehci_hcd [ 0.690079] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.690203] usb usb1: configuration #1 chosen from 1 choice [ 0.690256] hub 1-0:1.0: USB hub found [ 0.690265] hub 1-0:1.0: 8 ports detected [ 0.690348] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.690365] uhci_hcd: USB Universal Host Controller Interface driver [ 0.691047] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.691058] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.691064] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.691083] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.691113] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00 [ 0.691162] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.691167] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.691171] usb usb2: Product: UHCI Host Controller [ 0.691175] usb usb2: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd [ 0.691179] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.691280] usb usb2: configuration #1 chosen from 1 choice [ 0.691316] hub 2-0:1.0: USB hub found [ 0.691324] hub 2-0:1.0: 2 ports detected [ 0.692048] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.692057] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.692063] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.692076] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.692116] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00 [ 0.692165] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.692170] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.692174] usb usb3: Product: UHCI Host Controller [ 0.692178] usb usb3: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd [ 0.692182] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.692282] usb usb3: configuration #1 chosen from 1 choice [ 0.692317] hub 3-0:1.0: USB hub found [ 0.692332] hub 3-0:1.0: 2 ports detected [ 0.693048] alloc irq_desc for 18 on node 0 [ 0.693051] alloc kstat_irqs on node 0 [ 0.693061] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.693070] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.693075] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.693089] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.693127] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00 [ 0.693176] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.693181] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.693185] usb usb4: Product: UHCI Host Controller [ 0.693189] usb usb4: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd [ 0.693193] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.693288] usb usb4: configuration #1 chosen from 1 choice [ 0.693325] hub 4-0:1.0: USB hub found [ 0.693334] hub 4-0:1.0: 2 ports detected [ 0.694049] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.694059] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.694064] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.694077] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.694117] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00 [ 0.694165] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.694169] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.694173] usb usb5: Product: UHCI Host Controller [ 0.694177] usb usb5: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd [ 0.694181] usb usb5: SerialNumber: 0000:00:1d.3 [ 0.694278] usb usb5: configuration #1 chosen from 1 choice [ 0.694313] hub 5-0:1.0: USB hub found [ 0.694322] hub 5-0:1.0: 2 ports detected [ 0.694387] Initializing USB Mass Storage driver... [ 0.694427] usbcore: registered new interface driver usb-storage [ 0.694430] USB Mass Storage support registered. [ 0.694465] usbcore: registered new interface driver libusual [ 0.694480] usbcore: registered new interface driver ums-alauda [ 0.694494] usbcore: registered new interface driver ums-cypress [ 0.694511] usbcore: registered new interface driver ums-datafab [ 0.694525] usbcore: registered new interface driver ums-freecom [ 0.694539] usbcore: registered new interface driver ums-isd200 [ 0.694555] usbcore: registered new interface driver ums-jumpshot [ 0.694568] usbcore: registered new interface driver ums-karma [ 0.694582] usbcore: registered new interface driver ums-onetouch [ 0.694596] usbcore: registered new interface driver ums-sddr09 [ 0.694610] usbcore: registered new interface driver ums-sddr55 [ 0.694624] usbcore: registered new interface driver ums-usbat [ 0.694688] PNP: No PS/2 controller found. Probing ports directly. [ 0.695076] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.695084] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.695158] mice: PS/2 mouse device common for all mice [ 0.695298] rtc_cmos 00:04: RTC can wake from S4 [ 0.695349] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.695377] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.695392] cpuidle: using governor ladder [ 0.695395] cpuidle: using governor menu [ 0.695729] usbcore: registered new interface driver hiddev [ 0.695750] usbcore: registered new interface driver usbhid [ 0.695753] usbhid: v2.6:USB HID core driver [ 0.782046] TCP cubic registered [ 0.782111] NET: Registered protocol family 10 [ 0.782624] lo: Disabled Privacy Extensions [ 0.783016] lib80211: common routines for IEEE802.11 drivers [ 0.783019] lib80211_crypt: registered algorithm 'NULL' [ 0.783037] Using IPI No-Shortcut mode [ 0.783141] PM: Checking image partition /dev/disk/by-id/ata-Hitachi_HDT725032VLA380_VFJ201R23XUEXW-part1 [ 0.981047] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.981072] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.981089] ata4: SATA link down (SStatus 0 SControl 300) [ 0.981116] ata2: SATA link down (SStatus 0 SControl 300) [ 0.981774] ata1.00: ATA-7: Hitachi HDT725032VLA380, V54OA7BA, max UDMA/133 [ 0.981780] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 0.982755] ata1.00: configured for UDMA/133 [ 0.982925] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5 [ 0.983135] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 0.983196] sd 0:0:0:0: [sda] Write Protect is off [ 0.983200] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.983231] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.983386] sda: [ 0.984182] ata3.00: ATAPI: TSSTcorpCD/DVDW TS-H653L, 0514, max UDMA/33, ATAPI AN [ 0.984210] ata3.00: applying bridge limits [ 0.988194] ata3.00: configured for UDMA/33 [ 0.990076] scsi 2:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H653L 0514 PQ: 0 ANSI: 5 [ 0.997022] sda1 sda2 sda3 sda4 < sda5 > [ 1.031116] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.031124] PM: Resume from disk failed. [ 1.031139] registered taskstats version 1 [ 1.031264] Magic number: 1:186:891 [ 1.031332] rtc_cmos 00:04: setting system clock to 2009-11-03 15:53:06 UTC (1257263586) [ 1.031454] Freeing unused kernel memory: 464k freed [ 1.031635] Write protecting the kernel text: 4720k [ 1.031735] Write protecting the kernel read-only data: 2704k [ 1.077955] ACPI: SSDT 3fee7e40 00175 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 1.078329] processor LNXCPU:00: registered as cooling_device0 [ 1.078592] ACPI: SSDT 3fee8250 000CE (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 1.078914] processor LNXCPU:01: registered as cooling_device1 [ 1.083799] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.083819] ACPI: Thermal Zone [THRM] (40 C) [ 1.086833] fan PNP0C0B:00: registered as cooling_device2 [ 1.086841] ACPI: Fan [FAN] (on) [ 1.093687] udev: starting version 146 [ 1.247052] usb 1-5: new high speed USB device using ehci_hcd and address 5 [ 1.423967] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 1.423973] PM: Basic memory bitmaps created [ 1.436765] PM: Basic memory bitmaps freed [ 1.446733] PM: Starting manual resume from disk [ 1.446738] PM: Resume from partition 8:1 [ 1.446740] PM: Checking hibernation image. [ 1.446907] PM: Resume from disk failed. [ 1.524925] usb 1-5: New USB device found, idVendor=15a9, idProduct=0004 [ 1.524932] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.524937] usb 1-5: Product: 802.11 bg WLAN [ 1.524940] usb 1-5: Manufacturer: Ralink [ 1.525087] usb 1-5: configuration #1 chosen from 1 choice [ 1.627021] usb 1-8: new high speed USB device using ehci_hcd and address 6 [ 1.759681] usb 1-8: New USB device found, idVendor=0bda, idProduct=0111 [ 1.759687] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.759692] usb 1-8: Product: USB2.0-CRW [ 1.759695] usb 1-8: Manufacturer: Generic [ 1.759699] usb 1-8: SerialNumber: 20021111153705700 [ 1.759832] usb 1-8: configuration #1 chosen from 1 choice [ 1.761628] scsi4 : SCSI emulation for USB Mass Storage devices [ 1.762114] usb-storage: device found at 6 [ 1.762117] usb-storage: waiting for device to settle before scanning [ 1.825177] kjournald starting. Commit interval 15 seconds [ 1.837044] EXT3 FS on sda5, internal journal [ 1.837051] EXT3-fs: mounted filesystem with ordered data mode. [ 1.968031] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 2.155236] usb 2-1: New USB device found, idVendor=03f0, idProduct=7e04 [ 2.155242] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.155247] usb 2-1: Product: Deskjet F4100 series [ 2.155251] usb 2-1: Manufacturer: HP [ 2.155254] usb 2-1: SerialNumber: CN7592H1KH04TJ [ 2.155382] usb 2-1: configuration #1 chosen from 1 choice [ 2.364041] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 2.531253] usb 3-1: New USB device found, idVendor=03f0, idProduct=0f0c [ 2.531259] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.531264] usb 3-1: Product: USB Multimedia Cordless Kit [ 2.531268] usb 3-1: Manufacturer: BTC [ 2.531400] usb 3-1: configuration #1 chosen from 1 choice [ 2.549588] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input0 [ 2.549667] generic-usb 0003:03F0:0F0C.0001: input,hidraw0: USB HID v1.11 Keyboard [BTC USB Multimedia Cordless Kit] on usb-0000:00:1d.1-1/input0 [ 2.585930] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input1 [ 2.586105] generic-usb 0003:03F0:0F0C.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [BTC USB Multimedia Cordless Kit] on usb-0000:00:1d.1-1/input1 [ 2.768777] scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 2.775535] scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 2.783044] scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 2.784634] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 2.791278] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS [ 2.792042] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 2.792900] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 2.794635] sd 4:0:0:2: [sdd] Attached SCSI removable disk [ 2.795739] usb-storage: device scan complete [ 2.795770] sd 4:0:0:3: [sde] Attached SCSI removable disk [ 2.944283] usb 3-2: New USB device found, idVendor=0c45, idProduct=182e [ 2.944288] usb 3-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 2.944292] usb 3-2: Product: USB Headset [ 2.944294] usb 3-2: Manufacturer: GENERIC [ 2.944410] usb 3-2: configuration #1 chosen from 1 choice [ 2.951370] input: GENERIC USB Headset as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.3/input/input2 [ 2.951495] generic-usb 0003:0C45:182E.0003: input,hidraw2: USB HID v1.00 Device [GENERIC USB Headset] on usb-0000:00:1d.1-2/input3 [ 3.549086] udev: starting version 146 [ 3.643063] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 3.643121] ACPI: Power Button [PWRF] [ 3.643187] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 3.643219] ACPI: Power Button [PWRB] [ 3.732500] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 3.872315] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.872405] scsi 2:0:0:0: Attached scsi generic sg1 type 5 [ 3.872490] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 3.872572] sd 4:0:0:1: Attached scsi generic sg3 type 0 [ 3.872659] sd 4:0:0:2: Attached scsi generic sg4 type 0 [ 3.872745] sd 4:0:0:3: Attached scsi generic sg5 type 0 [ 3.885314] iTCO_vendor_support: vendor-support=0 [ 3.905270] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.905276] Uniform CD-ROM driver Revision: 3.20 [ 3.905407] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 3.953312] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 3.953403] iTCO_wdt: Found a ICH7DH TCO device (Version=2, TCOBASE=0x0460) [ 3.953468] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.093046] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4.938493] nvidia: module license 'NVIDIA' taints kernel. [ 4.938500] Disabling lock debugging due to kernel taint [ 5.032616] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 5.032620] e100: Copyright(c) 1999-2006 Intel Corporation [ 5.033072] alloc irq_desc for 20 on node 0 [ 5.033075] alloc kstat_irqs on node 0 [ 5.033085] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 5.063279] e100 0000:02:08.0: PME# disabled [ 5.064037] e100: eth0: e100_probe: addr 0xfdefd000, irq 20, MAC addr 00:1b:fc:7f:c1:ef [ 5.258020] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.258030] nvidia 0000:01:00.0: setting latency timer to 64 [ 5.258500] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009 [ 5.287052] ohci1394 0000:02:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 5.338103] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[fdeff000-fdeff7ff] Max Packet=[1024] IR/IT contexts=[8/8] [ 5.370610] cfg80211: Calling CRDA to update world regulatory domain [ 5.629815] Linux video capture interface: v2.00 [ 6.055993] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.056043] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 6.294139] usbcore: registered new interface driver snd-usb-audio [ 6.594206] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000151d97a] [ 6.633747] hda_codec: ALC888: BIOS auto-probing. [ 6.633756] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3881: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) [ 6.633762] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3885: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.633768] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3889: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 6.633773] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3890: mono: mono_out=0x0 [ 6.633778] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3893: dig-out=0x1e/0x0 [ 6.633786] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3901: inputs: mic=0x18, fmic=0x0, line=0x1a, fline=0x0, cd=0x0, aux=0x0 [ 6.634681] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/patch_realtek.c:1282: realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d [ 6.634688] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/patch_realtek.c:1357: realtek: Enable default setup for auto mode as fallback [ 6.634758] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 6.638493] saa7130/34: v4l2 driver version 0.2.15 loaded [ 6.662058] saa7134 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.662071] saa7133[0]: found at 0000:02:04.0, rev: 209, irq: 16, latency: 32, mmio: 0xfdefe000 [ 6.662083] saa7133[0]: subsystem: 1043:4871, board: ASUS P7131 4871 [card=111,autodetected] [ 6.662125] saa7133[0]: board init: gpio is 0 [ 6.662140] IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 6.776263] usblp1: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7E04 [ 6.776293] usbcore: registered new interface driver usblp [ 6.811033] saa7133[0]: i2c eeprom 00: 43 10 71 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 6.811048] saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff [ 6.811060] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 00 01 03 08 ff 00 cf ff ff ff ff [ 6.811073] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.811085] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 22 15 50 ff ff ff ff ff ff [ 6.811097] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.811109] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.811121] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.811134] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.811146] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.811158] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.811171] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.811183] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.811195] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.811207] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.811220] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.811235] i2c-adapter i2c-1: Invalid 7-bit address 0x7a [ 6.940199] tuner 1-004b: chip found @ 0x96 (saa7133[0]) [ 6.975024] tda829x 1-004b: setting tuner address to 61 [ 7.018012] tda829x 1-004b: type set to tda8290+75a [ 7.153354] phy0: Selected rate control algorithm 'minstrel' [ 7.154125] Registered led device: rt73usb-phy0::radio [ 7.154145] Registered led device: rt73usb-phy0::assoc [ 7.154164] Registered led device: rt73usb-phy0::quality [ 7.154625] usbcore: registered new interface driver rt73usb [ 9.715200] saa7133[0]: registered device video0 [v4l2] [ 9.715287] saa7133[0]: registered device vbi0 [ 9.843998] dvb_init() allocating 1 frontend [ 9.876154] DVB: registering new adapter (saa7133[0]) [ 9.876161] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)... [ 9.911022] tda1004x: setting up plls for 48MHz sampling clock [ 12.087021] tda1004x: timeout waiting for DSP ready [ 12.097020] tda1004x: found firmware revision 0 -- invalid [ 12.097024] tda1004x: trying to boot from eeprom [ 14.405021] tda1004x: timeout waiting for DSP ready [ 14.415020] tda1004x: found firmware revision 0 -- invalid [ 14.415024] tda1004x: waiting for firmware upload... [ 14.415032] saa7134 0000:02:04.0: firmware: requesting dvb-fe-tda10046.fw [ 14.457298] saa7134 0000:02:04.0: firmware: requesting dvb-fe-tda10045.fw [ 14.469820] tda1004x: no firmware upload (timeout or file not found?) [ 14.469837] tda1004x: firmware upload failed [ 14.595573] saa7134 ALSA driver for DMA sound loaded [ 14.595589] IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 14.595616] saa7133[0]/alsa: saa7133[0] at 0xfdefe000 irq 16 registered as card -1 [ 14.666375] Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1 across:2104472k [ 15.008658] device-mapper: uevent: version 1.0.3 [ 15.009195] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 15.304887] loop: module loaded [ 15.335346] kjournald starting. Commit interval 15 seconds [ 15.335360] EXT3-fs: mounted filesystem with ordered data mode. [ 15.363614] kjournald starting. Commit interval 15 seconds [ 15.363628] EXT3-fs: mounted filesystem with ordered data mode. [ 15.695869] fuse init (API version 7.12) [ 17.867672] powernow: This module only works with AMD K7 CPUs [ 18.789958] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.704171] e100: eth0 NIC Link is Up 100 Mbps Full Duplex [ 20.704533] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 21.006350] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 26.546988] bootsplash: status on console 0 changed to on [ 30.720035] eth0: no IPv6 routers present [ 37.262418] CPU0 attaching NULL sched-domain. [ 37.262484] CPU0 attaching NULL sched-domain.