PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
b44: eth0: powering down PHY
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
parport_pc 00:0c: disabled
serial 00:0b: disabled
b44 0000:02:00.0: PCI INT A disabled
ACPI handle has no context!
Intel ICH Modem 0000:00:1f.6: PCI INT B disabled
Intel ICH 0000:00:1f.5: PCI INT B disabled
ata_piix 0000:00:1f.1: PCI INT A disabled
ehci_hcd 0000:00:1d.7: PCI INT D disabled
uhci_hcd 0000:00:1d.2: PCI INT C disabled
uhci_hcd 0000:00:1d.1: PCI INT B disabled
uhci_hcd 0000:00:1d.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S3
suspend debug: Waiting for 5 seconds.
CPU0: Thermal LVT vector (0xfa) already installed
Force enabled HPET at resume
------------[ cut here ]------------
WARNING: at drivers/base/sys.c:353 __sysdev_resume+0xba/0xd0()
Hardware name: Inspiron 600m                   
Interrupts enabled after irqrouter_resume+0x0/0x3e
Modules linked in: xt_recent xt_state reiserfs snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device pcmcia snd_pcm_oss snd_mixer_oss snd_intel8x0 fan snd_intel8x0m snd_ac97_codec ac97_bus snd_pcm iTCO_wdt sr_mod b44 yenta_socket lp snd_timer snd parport_pc snd_page_alloc parport rsrc_nonstatic pcmcia_core ssb cdrom uhci_hcd iTCO_vendor_support intel_agp button battery agpgart thermal psmouse dcdbas ac ehci_hcd acpi_cpufreq processor rtc_cmos rtc_core rtc_lib
Pid: 3535, comm: bash Not tainted 2.6.32-rc3-jos #40
Call Trace:
 [<c10282ed>] warn_slowpath_common+0x6d/0xa0
 [<c11962ca>] ? __sysdev_resume+0xba/0xd0
 [<c11962ca>] ? __sysdev_resume+0xba/0xd0
 [<c1028366>] warn_slowpath_fmt+0x26/0x30
 [<c11962ca>] __sysdev_resume+0xba/0xd0
 [<c1151f66>] ? irqrouter_resume+0x0/0x3e
 [<c1196337>] sysdev_resume+0x57/0xd0
 [<c1127a7a>] ? __const_udelay+0x1a/0x20
 [<c104ee93>] suspend_devices_and_enter+0x173/0x1b0
 [<c12790b2>] ? printk+0x18/0x1e
 [<c104efd8>] enter_state+0x108/0x130
 [<c104e72b>] state_store+0x6b/0xb0
 [<c104e6c0>] ? state_store+0x0/0xb0
 [<c1121b90>] kobj_attr_store+0x20/0x30
 [<c10c4db4>] sysfs_write_file+0x94/0xf0
 [<c10834ea>] vfs_write+0x9a/0x180
 [<c108eb4a>] ? sys_dup3+0xda/0x130
 [<c10c4d20>] ? sysfs_write_file+0x0/0xf0
 [<c108368d>] sys_write+0x3d/0x70
 [<c1002d08>] sysenter_do_call+0x12/0x26
---[ end trace 965387a1bd51db71 ]---
ACPI: Waking up from system sleep state S3
ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800003, writing 0x2800007)
Intel ICH Modem 0000:00:1f.6: restoring config space at offset 0xf (was 0x200, writing 0x20b)
Intel ICH Modem 0000:00:1f.6: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
b44 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
yenta_cardbus 0000:02:01.0: O2: res at 0x94/0xD4: 00/ea
yenta_cardbus 0000:02:01.0: O2: enabling read prefetch/write burst
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: setting latency timer to 64
ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.1: setting latency timer to 64
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
Intel ICH 0000:00:1f.5: setting latency timer to 64
ata1.00: configured for UDMA/100
ata2.00: configured for UDMA/33
Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
b44 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
serial 00:0b: activated
parport_pc 00:0c: activated
sd 0:0:0:0: [sda] Starting disk
PM: Finishing wakeup.
Restarting tasks ... done.