Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009 Command line: root=/dev/disk/by-uuid/203c1d25-1762-4b3a-b281-23584ed1aa3a ro vga=795 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000006ff90000 (usable) BIOS-e820: 000000006ff90000 - 000000006ffa0000 (ACPI data) BIOS-e820: 000000006ffa0000 - 000000006ffe0000 (ACPI NVS) BIOS-e820: 000000006ffe0000 - 0000000070000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x6ff90 max_arch_pfn = 0x100000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000000 mask FFFFC0000000 write-back 1 base 000040000000 mask FFFFE0000000 write-back 2 base 000060000000 mask FFFFF0000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Scanning 0 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009e800 (usable) modified: 000000000009e800 - 00000000000a0000 (reserved) modified: 00000000000e7000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000006ff90000 (usable) modified: 000000006ff90000 - 000000006ffa0000 (ACPI data) modified: 000000006ffa0000 - 000000006ffe0000 (ACPI NVS) modified: 000000006ffe0000 - 0000000070000000 (reserved) modified: 00000000fec00000 - 00000000fec01000 (reserved) modified: 00000000fee00000 - 00000000fef00000 (reserved) modified: 00000000fff00000 - 0000000100000000 (reserved) init_memory_mapping: 0000000000000000-000000006ff90000 Using GB pages for direct mapping 0000000000 - 0040000000 page 1G 0040000000 - 006fe00000 page 2M 006fe00000 - 006ff90000 page 4k kernel direct mapping tables up to 6ff90000 @ 10000-13000 RAMDISK: 37f48000 - 37fef34c ACPI: RSDP 00000000000fbdb0 00014 (v00 ACPIAM) ACPI: RSDT 000000006ff90000 00044 (v01 072709 RSDT2049 20090727 MSFT 00000097) ACPI: FACP 000000006ff90200 00084 (v01 A M I OEMFACP 12000601 MSFT 00000097) ACPI: DSDT 000000006ff90450 08867 (v01 AS208 AS208141 00000141 INTL 20051117) ACPI: FACS 000000006ffa0000 00040 ACPI: APIC 000000006ff90390 00080 (v01 072709 APIC2049 20090727 MSFT 00000097) ACPI: MCFG 000000006ff90410 0003C (v01 072709 OEMMCFG 20090727 MSFT 00000097) ACPI: OEMB 000000006ffa0040 00073 (v01 072709 OEMB2049 20090727 MSFT 00000097) ACPI: AAFT 000000006ff98cc0 00027 (v01 072709 OEMAAFT 20090727 MSFT 00000097) ACPI: INFO 000000006ffa00c0 00124 (v01 072709 AMDINFO 20090727 MSFT 00000097) ACPI: NVHD 000000006ffa01f0 00284 (v01 072709 NVHDCP 20090727 MSFT 00000097) ACPI: SSDT 000000006ff98cf0 002B4 (v01 A M I POWERNOW 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 006ff90000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000082d0d0] TEXT DATA BSS ==> [0000200000 - 000082d0d0] #3 [0037f48000 - 0037fef34c] RAMDISK ==> [0037f48000 - 0037fef34c] #4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000] #5 [000082e000 - 000082e12b] BRK ==> [000082e000 - 000082e12b] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] found SMP MP-table at [ffff8800000ff780] ff780 [ffffe20000000000-ffffe200019fffff] PMD -> [ffff880001200000-ffff880002bfffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009e 0: 0x00000100 -> 0x0006ff90 On node 0 totalpages: 458526 DMA zone: 56 pages used for memmap DMA zone: 1683 pages reserved DMA zone: 2243 pages, LIFO batch:0 DMA32 zone: 6215 pages used for memmap DMA32 zone: 448329 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x2008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009e000 - 000000000009f000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e7000 PM: Registered nosave memory: 00000000000e7000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 70000000:8ec00000) NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 25 pages at ffff880001010000, static data 72352 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 450572 Kernel command line: root=/dev/disk/by-uuid/203c1d25-1762-4b3a-b281-23584ed1aa3a ro vga=795 Initializing CPU#0 NR_IRQS:768 PID hash table entries: 4096 (order: 12, 32768 bytes) Fast TSC calibration using PIT Detected 2699.554 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 3044000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 1796452k/1834560k available (3409k kernel code, 456k absent, 37240k reserved, 1239k data, 464k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 5401.06 BogoMIPS (lpj=8998500) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using C1E aware idle routine ACPI: Core revision 20090320 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) 7750 Dual-Core Processor stepping 03 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5401.65 BogoMIPS (lpj=8999446) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Athlon(tm) 7750 Dual-Core Processor stepping 03 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (10803.71 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 1888 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 0000000080000000 aka 2048M Fam 10h mmconf [fc000000, fdffffff] node 0 link 0: mmio [fc000000, fdffffff] ==> none node 0 link 0: mmio [80000000, fbffffff] node 0 link 0: mmio [fe000000, fe0bffff] node 0 link 0: mmio [a0000, bffff] bus: [00,07] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [80000000, fbffffff] bus: 00 index 2 mmio: [fe000000, fcffffffff] bus: 00 index 3 mmio: [a0000, bffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access PCI: Using configuration type 1 for extended access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31 PCI: MCFG area at fc000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at fc000000 - fdffffff ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 80, should be 7F [20090320] ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: reg 10 io port: [0x2f00-0x2fff] pci 0000:00:01.1: reg 10 io port: [0x2900-0x293f] pci 0000:00:01.1: reg 20 io port: [0x2d00-0x2d3f] pci 0000:00:01.1: reg 24 io port: [0x2e00-0x2e3f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:01.3: reg 10 32bit mmio: [0xfad80000-0xfadfffff] pci 0000:00:02.0: reg 10 32bit mmio: [0xfad7f000-0xfad7ffff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10 32bit mmio: [0xfad7ec00-0xfad7ecff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:04.0: reg 10 32bit mmio: [0xfad7d000-0xfad7dfff] pci 0000:00:04.0: supports D1 D2 pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:04.1: reg 10 32bit mmio: [0xfad7e800-0xfad7e8ff] pci 0000:00:04.1: supports D1 D2 pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.1: PME# disabled pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf] pci 0000:00:09.0: reg 10 io port: [0xc480-0xc487] pci 0000:00:09.0: reg 14 io port: [0xc400-0xc403] pci 0000:00:09.0: reg 18 io port: [0xc080-0xc087] pci 0000:00:09.0: reg 1c io port: [0xc000-0xc003] pci 0000:00:09.0: reg 20 io port: [0xbc00-0xbc0f] pci 0000:00:09.0: reg 24 32bit mmio: [0xfad76000-0xfad77fff] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfad7c000-0xfad7cfff] pci 0000:00:0a.0: reg 14 io port: [0xb880-0xb887] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfad7e400-0xfad7e4ff] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfad7e000-0xfad7e00f] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.0: PME# disabled pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:12.0: PME# disabled pci 0000:01:09.0: reg 10 io port: [0xdc00-0xdc3f] pci 0000:01:09.0: supports D1 D2 pci 0000:01:0a.0: reg 10 32bit mmio: [0xfaeff800-0xfaefffff] pci 0000:01:0a.0: supports D1 D2 pci 0000:00:08.0: transparent bridge pci 0000:00:08.0: bridge io port: [0xd000-0xdfff] pci 0000:00:08.0: bridge 32bit mmio: [0xfae00000-0xfaefffff] pci 0000:02:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] pci 0000:02:00.0: reg 14 64bit mmio: [0xf0000000-0xf7ffffff] pci 0000:02:00.0: reg 1c 64bit mmio: [0xee000000-0xefffffff] pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f] pci 0000:02:00.0: reg 30 32bit mmio: [0xfafe0000-0xfaffffff] pci 0000:00:0b.0: bridge io port: [0xe000-0xefff] pci 0000:00:0b.0: bridge 32bit mmio: [0xfaf00000-0xfbffffff] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xee000000-0xf7ffffff] pci 0000:00:10.0: bridge 64bit mmio pref: [0xf9e00000-0xf9efffff] pci 0000:00:12.0: bridge 64bit mmio pref: [0xf9f00000-0xf9ffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11 ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15 ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *15 ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *7 ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10 PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:04: ioport range 0x4d0-0x4d1 has been reserved system 00:04: ioport range 0x800-0x80f has been reserved system 00:04: ioport range 0x2000-0x207f has been reserved system 00:04: ioport range 0x2080-0x20ff has been reserved system 00:04: ioport range 0x2400-0x247f has been reserved system 00:04: ioport range 0x2480-0x24ff has been reserved system 00:04: ioport range 0x2800-0x287f has been reserved system 00:04: ioport range 0x2880-0x28ff has been reserved system 00:04: iomem range 0xfed04000-0xfed04fff has been reserved system 00:04: iomem range 0xfee01000-0xfeefffff has been reserved system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved system 00:09: ioport range 0x290-0x29f has been reserved system 00:0a: iomem range 0xfc000000-0xfdffffff has been reserved system 00:0b: iomem range 0x0-0x9ffff could not be reserved system 00:0b: iomem range 0xc0000-0xcffff has been reserved system 00:0b: iomem range 0xe0000-0xfffff could not be reserved system 00:0b: iomem range 0x100000-0x7fffffff could not be reserved system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 pci 0000:00:08.0: IO window: 0xd000-0xdfff pci 0000:00:08.0: MEM window: 0xfae00000-0xfaefffff pci 0000:00:08.0: PREFETCH window: disabled pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0b.0: IO window: 0xe000-0xefff pci 0000:00:0b.0: MEM window: 0xfaf00000-0xfbffffff pci 0000:00:0b.0: PREFETCH window: 0x000000ee000000-0x000000f7ffffff pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 pci 0000:00:10.0: IO window: disabled pci 0000:00:10.0: MEM window: disabled pci 0000:00:10.0: PREFETCH window: 0x000000f9e00000-0x000000f9efffff pci 0000:00:12.0: PCI bridge, secondary bus 0000:04 pci 0000:00:12.0: IO window: disabled pci 0000:00:12.0: MEM window: disabled pci 0000:00:12.0: PREFETCH window: 0x000000f9f00000-0x000000f9ffffff pci 0000:00:08.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19 pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:10.0: setting latency timer to 64 ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18 pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:12.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] pci_bus 0000:01: resource 1 mem: [0xfae00000-0xfaefffff] pci_bus 0000:01: resource 3 io: [0x00-0xffff] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] pci_bus 0000:02: resource 1 mem: [0xfaf00000-0xfbffffff] pci_bus 0000:02: resource 2 pref mem [0xee000000-0xf7ffffff] pci_bus 0000:03: resource 2 pref mem [0xf9e00000-0xf9efffff] pci_bus 0000:04: resource 2 pref mem [0xf9f00000-0xf9ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... Freeing initrd memory: 668k freed Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1250665264.309:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 3510 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:08.0: Enabling HT MSI Mapping pci 0000:00:09.0: Enabling HT MSI Mapping pci 0000:00:0a.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Enabling HT MSI Mapping pci 0000:02:00.0: Boot video device pcieport-driver 0000:00:10.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:10.0: setting latency timer to 64 pcieport-driver 0000:00:12.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:12.0: setting latency timer to 64 vesafb: framebuffer at 0xef000000, mapped to 0xffffc20002100000, using 10240k, total 14336k vesafb: mode is 1280x1024x32, linelength=5120, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 464k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 SCSI subsystem initialized libata version 3.00 loaded. pata_acpi 0000:00:06.0: setting latency timer to 64 pata_amd 0000:00:06.0: version 0.4.1 pata_amd 0000:00:06.0: setting latency timer to 64 scsi0 : pata_amd scsi1 : pata_amd ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 ahci 0000:00:09.0: version 3.0 ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 ahci 0000:00:09.0: irq 26 for MSI/MSI-X ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio ahci 0000:00:09.0: setting latency timer to 64 scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci scsi6 : ahci scsi7 : ahci ata3: SATA max UDMA/133 abar m8192@0xfad76000 port 0xfad76100 irq 26 ata4: SATA max UDMA/133 abar m8192@0xfad76000 port 0xfad76180 irq 26 ata5: SATA max UDMA/133 abar m8192@0xfad76000 port 0xfad76200 irq 26 ata6: SATA max UDMA/133 abar m8192@0xfad76000 port 0xfad76280 irq 26 ata7: SATA max UDMA/133 abar m8192@0xfad76000 port 0xfad76300 irq 26 ata8: SATA max UDMA/133 abar m8192@0xfad76000 port 0xfad76380 irq 26 ata1.00: ATAPI: LITE-ON DVDRW SHW-160P6S, PS0A, max UDMA/66 ata1.01: ATAPI: SAMSUNG CD-R/RW SW-248F, R602, max UDMA/33 ata1: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x15) ata1: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x15) Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 ata1.00: configured for UDMA/66 ata1.01: configured for UDMA/33 scsi 0:0:0:0: CD-ROM LITE-ON DVDRW SHW-160P6S PS0A PQ: 0 ANSI: 5 scsi 0:0:1:0: CD-ROM SAMSUNG CD-R/RW SW-248F R602 PQ: 0 ANSI: 5 ata2: port disabled. ignoring. ata3: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata7: SATA link down (SStatus 0 SControl 300) ata8: SATA link down (SStatus 0 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133 ata4.00: 488397168 sectors, multi 0: LBA48 ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5 Driver 'sd' needs updating - please use bus_type methods sd 3:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) Driver 'sr' needs updating - please use bus_type methods sd 3:0:0:0: [sda] Write Protect is off sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray sr 0:0:1:0: Attached scsi CD-ROM sr1 sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 3:0:0:0: [sda] Attached SCSI disk EXT4-fs: barriers enabled EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled kjournald2 starting: pid 578, dev sda1:8, commit interval 5 seconds EXT4-fs: mounted filesystem sda1 with ordered data mode rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram udev: starting version 145 vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Successfully done. vboxdrv: Found 2 processor cores. VBoxDrv: dbg - g_abExecMemory=ffffffffa013c760 vboxdrv: fAsync=0 offMin=0x348 offMax=0x2199 vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 3.0.2 (interface 0x000e0000). forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 forcedeth 0000:00:0a.0: setting latency timer to 64 forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:19:66:bf:9a:d8 forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21 ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 21, io mem 0xfad7ec00 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20 ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:04.1: setting latency timer to 64 ehci_hcd 0000:00:04.1: EHCI Host Controller ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:04.1: debug port 1 ehci_hcd 0000:00:04.1: cache line size of 64 is not supported ehci_hcd 0000:00:04.1: irq 20, io mem 0xfad7e800 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected sr 0:0:0:0: Attached scsi generic sg0 type 5 sr 0:0:1:0: Attached scsi generic sg1 type 5 sd 3:0:0:0: Attached scsi generic sg2 type 0 processor ACPI_CPU:00: registered as cooling_device0 processor ACPI_CPU:01: registered as cooling_device1 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 ACPI: Power Button [PWRB] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00 ACPI: WMI: Mapper loaded VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0396f00 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Linux video capture interface: v2.00 usb 1-4: new high speed USB device using ehci_hcd and address 4 usb 1-4: configuration #1 chosen from 1 choice saa7130/34: v4l2 driver version 0.2.15 loaded ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 17 saa7134 0000:01:0a.0: PCI INT A -> Link[LNKC] -> GSI 17 (level, low) -> IRQ 17 saa7133[0]: found at 0000:01:0a.0, rev: 209, irq: 17, latency: 32, mmio: 0xfaeff800 saa7133[0]: subsystem: 17de:7352, board: Kworld ATSC110/115 [card=90,autodetected] saa7133[0]: board init: gpio is 100 IRQ 17/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.0: irq 23, io mem 0xfad7f000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected ACPI: PCI Interrupt Link [UB11] enabled at IRQ 22 ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 22 (level, low) -> IRQ 22 ohci_hcd 0000:00:04.0: setting latency timer to 64 ohci_hcd 0000:00:04.0: OHCI Host Controller ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:04.0: irq 22, io mem 0xfad7d000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected saa7133[0]: i2c eeprom 00: de 17 52 73 ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff nvidia: module license 'NVIDIA' taints kernel. Disabling lock debugging due to kernel taint usb 3-2: new low speed USB device using ohci_hcd and address 2 Initializing USB Mass Storage driver... scsi8 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning tuner 2-0061: chip found @ 0xc2 (saa7133[0]) usb 3-2: configuration #1 chosen from 1 choice ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 21 nvidia 0000:02:00.0: PCI INT A -> Link[SGRU] -> GSI 21 (level, low) -> IRQ 21 nvidia 0000:02:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.18 Wed Jul 22 15:36:09 PDT 2009 usbcore: registered new interface driver hiddev usb 3-3: new low speed USB device using ohci_hcd and address 3 tuner-simple 2-0061: creating new instance tuner-simple 2-0061: type set to 68 (Philips TUV1236D ATSC/NTSC dual in) saa7133[0]: dsp access error saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 16 EMU10K1_Audigy 0000:01:09.0: PCI INT A -> Link[LNKB] -> GSI 16 (level, low) -> IRQ 16 Audigy2 value: Special config. dvb_init() allocating 1 frontend nxt200x: NXT2004 Detected tuner-simple 2-0061: attaching existing instance tuner-simple 2-0061: type set to 68 (Philips TUV1236D ATSC/NTSC dual in) DVB: registering new adapter (saa7133[0]) DVB: registering adapter 0 frontend 0 (Nextwave NXT200X VSB/QAM frontend)... usb 3-3: configuration #1 chosen from 1 choice nxt2004: Waiting for firmware upload (dvb-fe-nxt2004.fw)... i2c-adapter i2c-2: firmware: requesting dvb-fe-nxt2004.fw generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 750 FW:819.z2.D USB FW:z2] on usb-0000:00:02.0-2/input0 input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input4 generic-usb 0003:046D:C50E.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:02.0-3/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nxt2004: Waiting for firmware upload(2)... nxt2004: Firmware upload complete saa7134 ALSA driver for DMA sound loaded IRQ 17/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs saa7133[0]/alsa: saa7133[0] at 0xfaeff800 irq 17 registered as card -1 EXT4 FS on sda1, internal journal on sda1:8 EXT4-fs: barriers enabled kjournald2 starting: pid 3694, dev sda2:8, commit interval 5 seconds EXT4 FS on sda2, internal journal on sda2:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem sda2 with ordered data mode Adding 1048568k swap on /swapfile. Priority:-1 extents:4 across:3104760k scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 sd 8:0:0:0: Attached scsi generic sg3 type 0 scsi 8:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 sd 8:0:0:1: Attached scsi generic sg4 type 0 scsi 8:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0 sd 8:0:0:2: Attached scsi generic sg5 type 0 sd 8:0:0:0: [sdb] Attached SCSI removable disk sd 8:0:0:1: [sdc] Attached SCSI removable disk scsi 8:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 sd 8:0:0:3: Attached scsi generic sg6 type 0 usb-storage: device scan complete sd 8:0:0:3: [sde] Attached SCSI removable disk sd 8:0:0:2: [sdd] Attached SCSI removable disk forcedeth 0000:00:0a.0: irq 27 for MSI/MSI-X NET: Registered protocol family 10 lo: Disabled Privacy Extensions RPC: Registered udp transport module. RPC: Registered tcp transport module. Slow work thread pool: Starting up Slow work thread pool: Ready FS-Cache: Loaded FS-Cache: Netfs 'nfs' registered for caching eth0: no IPv6 routers present usb 4-4: new full speed USB device using ohci_hcd and address 2 usb 4-4: configuration #1 chosen from 2 choices cdc_acm 4-4:1.0: ttyACM0: USB ACM device usbcore: registered new interface driver cdc_acm cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters usb 4-4: USB disconnect, address 2 usb 4-4: new full speed USB device using ohci_hcd and address 3 usb 4-4: configuration #1 chosen from 2 choices cdc_acm 4-4:1.0: ttyACM0: USB ACM device usb 4-4: USB disconnect, address 3 usb 4-4: new full speed USB device using ohci_hcd and address 4 usb 4-4: configuration #1 chosen from 2 choices cdc_acm 4-4:1.0: ttyACM0: USB ACM device usb 4-4: USB disconnect, address 4 usb 4-4: new full speed USB device using ohci_hcd and address 5 usb 4-4: configuration #1 chosen from 2 choices cdc_acm 4-4:1.0: ttyACM0: USB ACM device usb 4-4: USB disconnect, address 5 usb 4-4: new full speed USB device using ohci_hcd and address 6 usb 4-4: configuration #1 chosen from 2 choices cdc_acm 4-4:1.0: ttyACM0: USB ACM device usb 3-3: USB disconnect, address 3 INFO: task khubd:1498 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. khubd D 0000000058477d74 0 1498 2 ffff88006eb28ca0 0000000000000046 000000020000000e 0000000affffffff ffffffffffffffff ffff88006f863280 ffff88006eb28f40 00000000000111c0 000000000000cb68 ffff88006eb28f40 ffff88006eb28ca0 0000000058477d74 Call Trace: [] ? schedule+0x29/0x70 [] ? usb_kill_urb+0x95/0xd0 [usbcore] [] ? autoremove_wake_function+0x0/0x60 [] ? usb_hcd_flush_endpoint+0xbd/0x140 [usbcore] [] ? usb_disable_endpoint+0x6b/0xf0 [usbcore] [] ? usb_disable_device+0x4d/0x150 [usbcore] [] ? usb_disconnect+0xfb/0x1a0 [usbcore] [] ? hub_thread+0x4f5/0x1280 [usbcore] [] ? finish_task_switch+0x113/0x160 [] ? autoremove_wake_function+0x0/0x60 [] ? hub_thread+0x0/0x1280 [usbcore] [] ? kthread+0x64/0xc0 [] ? schedule_tail+0x30/0x80 [] ? child_rip+0xa/0x20 [] ? kthread+0x0/0xc0 [] ? child_rip+0x0/0x20 INFO: task hald-addon-usb-:4017 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. hald-addon-us D 000000008b0bd0f1 0 4017 3926 ffff880068880000 0000000000000082 6464612d646c6168 002d6273752d6e6f 0000000000000000 ffff88006f863280 ffff8800688802a0 00000000000111c0 000000000000cb68 ffff8800688802a0 ffff880068880000 000000008b0bd0f1 Call Trace: [] ? schedule+0x29/0x70 [] ? schedule_timeout+0x1a5/0x1f0 [] ? __pollwait+0x0/0x150 [] ? usb_start_wait_urb+0x9c/0x110 [usbcore] [] ? __d_lookup+0x17d/0x1a0 [] ? __down+0x75/0xc0 [] ? down+0x57/0x70 [] ? usbdev_ioctl+0xd8/0x1740 [usbcore] [] ? usbdev_open+0xb0/0x320 [usbcore] [] ? chrdev_open+0x157/0x260 [] ? chrdev_open+0x0/0x260 [] ? __dentry_open+0x2ac/0x390 [] ? do_filp_open+0x2da/0xa50 [] ? vfs_ioctl+0xa2/0xd0 [] ? do_vfs_ioctl+0xa0/0x580 [] ? sys_ioctl+0xa0/0xc0 [] ? do_sys_open+0xdb/0x130 [] ? system_call_fastpath+0x16/0x1b INFO: task khubd:1498 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. khubd D 0000000058477d74 0 1498 2 ffff88006eb28ca0 0000000000000046 000000020000000e 0000000affffffff ffffffffffffffff ffff88006f863280 ffff88006eb28f40 00000000000111c0 000000000000cb68 ffff88006eb28f40 ffff88006eb28ca0 0000000058477d74 Call Trace: [] ? schedule+0x29/0x70 [] ? usb_kill_urb+0x95/0xd0 [usbcore] [] ? autoremove_wake_function+0x0/0x60 [] ? usb_hcd_flush_endpoint+0xbd/0x140 [usbcore] [] ? usb_disable_endpoint+0x6b/0xf0 [usbcore] [] ? usb_disable_device+0x4d/0x150 [usbcore] [] ? usb_disconnect+0xfb/0x1a0 [usbcore] [] ? hub_thread+0x4f5/0x1280 [usbcore] [] ? finish_task_switch+0x113/0x160 [] ? autoremove_wake_function+0x0/0x60 [] ? hub_thread+0x0/0x1280 [usbcore] [] ? kthread+0x64/0xc0 [] ? schedule_tail+0x30/0x80 [] ? child_rip+0xa/0x20 [] ? kthread+0x0/0xc0 [] ? child_rip+0x0/0x20 INFO: task hald-addon-usb-:4017 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. hald-addon-us D 000000008b0bd0f1 0 4017 3926 ffff880068880000 0000000000000082 6464612d646c6168 002d6273752d6e6f 0000000000000000 ffff88006f863280 ffff8800688802a0 00000000000111c0 000000000000cb68 ffff8800688802a0 ffff880068880000 000000008b0bd0f1 Call Trace: [] ? schedule+0x29/0x70 [] ? schedule_timeout+0x1a5/0x1f0 [] ? __pollwait+0x0/0x150 [] ? usb_start_wait_urb+0x9c/0x110 [usbcore] [] ? __d_lookup+0x17d/0x1a0 [] ? __down+0x75/0xc0 [] ? down+0x57/0x70 [] ? usbdev_ioctl+0xd8/0x1740 [usbcore] [] ? usbdev_open+0xb0/0x320 [usbcore] [] ? chrdev_open+0x157/0x260 [] ? chrdev_open+0x0/0x260 [] ? __dentry_open+0x2ac/0x390 [] ? do_filp_open+0x2da/0xa50 [] ? vfs_ioctl+0xa2/0xd0 [] ? do_vfs_ioctl+0xa0/0x580 [] ? sys_ioctl+0xa0/0xc0 [] ? do_sys_open+0xdb/0x130 [] ? system_call_fastpath+0x16/0x1b INFO: task khubd:1498 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. khubd D 0000000058477d74 0 1498 2 ffff88006eb28ca0 0000000000000046 000000020000000e 0000000affffffff ffffffffffffffff ffff88006f863280 ffff88006eb28f40 00000000000111c0 000000000000cb68 ffff88006eb28f40 ffff88006eb28ca0 0000000058477d74 Call Trace: [] ? schedule+0x29/0x70 [] ? usb_kill_urb+0x95/0xd0 [usbcore] [] ? autoremove_wake_function+0x0/0x60 [] ? usb_hcd_flush_endpoint+0xbd/0x140 [usbcore] [] ? usb_disable_endpoint+0x6b/0xf0 [usbcore] [] ? usb_disable_device+0x4d/0x150 [usbcore] [] ? usb_disconnect+0xfb/0x1a0 [usbcore] [] ? hub_thread+0x4f5/0x1280 [usbcore] [] ? finish_task_switch+0x113/0x160 [] ? autoremove_wake_function+0x0/0x60 [] ? hub_thread+0x0/0x1280 [usbcore] [] ? kthread+0x64/0xc0 [] ? schedule_tail+0x30/0x80 [] ? child_rip+0xa/0x20 [] ? kthread+0x0/0xc0 [] ? child_rip+0x0/0x20 INFO: task hald-addon-usb-:4017 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. hald-addon-us D 000000008b0bd0f1 0 4017 3926 ffff880068880000 0000000000000082 6464612d646c6168 002d6273752d6e6f 0000000000000000 ffff88006f863280 ffff8800688802a0 00000000000111c0 000000000000cb68 ffff8800688802a0 ffff880068880000 000000008b0bd0f1 Call Trace: [] ? schedule+0x29/0x70 [] ? schedule_timeout+0x1a5/0x1f0 [] ? __pollwait+0x0/0x150 [] ? usb_start_wait_urb+0x9c/0x110 [usbcore] [] ? __d_lookup+0x17d/0x1a0 [] ? __down+0x75/0xc0 [] ? down+0x57/0x70 [] ? usbdev_ioctl+0xd8/0x1740 [usbcore] [] ? usbdev_open+0xb0/0x320 [usbcore] [] ? chrdev_open+0x157/0x260 [] ? chrdev_open+0x0/0x260 [] ? __dentry_open+0x2ac/0x390 [] ? do_filp_open+0x2da/0xa50 [] ? vfs_ioctl+0xa2/0xd0 [] ? do_vfs_ioctl+0xa0/0x580 [] ? sys_ioctl+0xa0/0xc0 [] ? do_sys_open+0xdb/0x130 [] ? system_call_fastpath+0x16/0x1b INFO: task khubd:1498 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. khubd D 0000000058477d74 0 1498 2 ffff88006eb28ca0 0000000000000046 000000020000000e 0000000affffffff ffffffffffffffff ffff88006f863280 ffff88006eb28f40 00000000000111c0 000000000000cb68 ffff88006eb28f40 ffff88006eb28ca0 0000000058477d74 Call Trace: [] ? schedule+0x29/0x70 [] ? usb_kill_urb+0x95/0xd0 [usbcore] [] ? autoremove_wake_function+0x0/0x60 [] ? usb_hcd_flush_endpoint+0xbd/0x140 [usbcore] [] ? usb_disable_endpoint+0x6b/0xf0 [usbcore] [] ? usb_disable_device+0x4d/0x150 [usbcore] [] ? usb_disconnect+0xfb/0x1a0 [usbcore] [] ? hub_thread+0x4f5/0x1280 [usbcore] [] ? finish_task_switch+0x113/0x160 [] ? autoremove_wake_function+0x0/0x60 [] ? hub_thread+0x0/0x1280 [usbcore] [] ? kthread+0x64/0xc0 [] ? schedule_tail+0x30/0x80 [] ? child_rip+0xa/0x20 [] ? kthread+0x0/0xc0 [] ? child_rip+0x0/0x20 INFO: task hald-addon-usb-:4017 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. hald-addon-us D 000000008b0bd0f1 0 4017 3926 ffff880068880000 0000000000000082 6464612d646c6168 002d6273752d6e6f 0000000000000000 ffff88006f863280 ffff8800688802a0 00000000000111c0 000000000000cb68 ffff8800688802a0 ffff880068880000 000000008b0bd0f1 Call Trace: [] ? schedule+0x29/0x70 [] ? schedule_timeout+0x1a5/0x1f0 [] ? __pollwait+0x0/0x150 [] ? usb_start_wait_urb+0x9c/0x110 [usbcore] [] ? __d_lookup+0x17d/0x1a0 [] ? __down+0x75/0xc0 [] ? down+0x57/0x70 [] ? usbdev_ioctl+0xd8/0x1740 [usbcore] [] ? usbdev_open+0xb0/0x320 [usbcore] [] ? chrdev_open+0x157/0x260 [] ? chrdev_open+0x0/0x260 [] ? __dentry_open+0x2ac/0x390 [] ? do_filp_open+0x2da/0xa50 [] ? vfs_ioctl+0xa2/0xd0 [] ? do_vfs_ioctl+0xa0/0x580 [] ? sys_ioctl+0xa0/0xc0 [] ? do_sys_open+0xdb/0x130 [] ? system_call_fastpath+0x16/0x1b sd 8:0:0:1: [sdc] 503808 512-byte hardware sectors: (257 MB/246 MiB) sd 8:0:0:1: [sdc] Assuming drive cache: write through sd 8:0:0:1: [sdc] Assuming drive cache: write through sdc: sdc1 INFO: task khubd:1498 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. khubd D 0000000058477d74 0 1498 2 ffff88006eb28ca0 0000000000000046 000000020000000e 0000000affffffff ffffffffffffffff ffff88006f863280 ffff88006eb28f40 00000000000111c0 000000000000cb68 ffff88006eb28f40 ffff88006eb28ca0 0000000058477d74 Call Trace: [] ? schedule+0x29/0x70 [] ? usb_kill_urb+0x95/0xd0 [usbcore] [] ? autoremove_wake_function+0x0/0x60 [] ? usb_hcd_flush_endpoint+0xbd/0x140 [usbcore] [] ? usb_disable_endpoint+0x6b/0xf0 [usbcore] [] ? usb_disable_device+0x4d/0x150 [usbcore] [] ? usb_disconnect+0xfb/0x1a0 [usbcore] [] ? hub_thread+0x4f5/0x1280 [usbcore] [] ? finish_task_switch+0x113/0x160 [] ? autoremove_wake_function+0x0/0x60 [] ? hub_thread+0x0/0x1280 [usbcore] [] ? kthread+0x64/0xc0 [] ? schedule_tail+0x30/0x80 [] ? child_rip+0xa/0x20 [] ? kthread+0x0/0xc0 [] ? child_rip+0x0/0x20 INFO: task hald-addon-usb-:4017 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. hald-addon-us D 000000008b0bd0f1 0 4017 3926 ffff880068880000 0000000000000082 6464612d646c6168 002d6273752d6e6f 0000000000000000 ffff88006f863280 ffff8800688802a0 00000000000111c0 000000000000cb68 ffff8800688802a0 ffff880068880000 000000008b0bd0f1 Call Trace: [] ? schedule+0x29/0x70 [] ? schedule_timeout+0x1a5/0x1f0 [] ? __pollwait+0x0/0x150 [] ? usb_start_wait_urb+0x9c/0x110 [usbcore] [] ? __d_lookup+0x17d/0x1a0 [] ? __down+0x75/0xc0 [] ? down+0x57/0x70 [] ? usbdev_ioctl+0xd8/0x1740 [usbcore] [] ? usbdev_open+0xb0/0x320 [usbcore] [] ? chrdev_open+0x157/0x260 [] ? chrdev_open+0x0/0x260 [] ? __dentry_open+0x2ac/0x390 [] ? do_filp_open+0x2da/0xa50 [] ? vfs_ioctl+0xa2/0xd0 [] ? do_vfs_ioctl+0xa0/0x580 [] ? sys_ioctl+0xa0/0xc0 [] ? do_sys_open+0xdb/0x130 [] ? system_call_fastpath+0x16/0x1b