[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-rc6 (pyther@tux) (gcc version 4.4.1 (GCC) ) #2 SMP Wed Aug 19 22:19:39 EDT 2009 [ 0.000000] Command line: root=/dev/sda1 ro vga=795 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006ff90000 (usable) [ 0.000000] BIOS-e820: 000000006ff90000 - 000000006ffa0000 (ACPI data) [ 0.000000] BIOS-e820: 000000006ffa0000 - 000000006ffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006ffe0000 - 0000000070000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x6ff90 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFFC0000000 write-back [ 0.000000] 1 base 000040000000 mask FFFFE0000000 write-back [ 0.000000] 2 base 000060000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009e800 (usable) [ 0.000000] modified: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e7000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000006ff90000 (usable) [ 0.000000] modified: 000000006ff90000 - 000000006ffa0000 (ACPI data) [ 0.000000] modified: 000000006ffa0000 - 000000006ffe0000 (ACPI NVS) [ 0.000000] modified: 000000006ffe0000 - 0000000070000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-000000006ff90000 [ 0.000000] 0000000000 - 0040000000 page 1G [ 0.000000] 0040000000 - 006fe00000 page 2M [ 0.000000] 006fe00000 - 006ff90000 page 4k [ 0.000000] kernel direct mapping tables up to 6ff90000 @ 10000-13000 [ 0.000000] ACPI: RSDP 00000000000fbdb0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 000000006ff90000 00044 (v01 072709 RSDT2049 20090727 MSFT 00000097) [ 0.000000] ACPI: FACP 000000006ff90200 00084 (v01 A M I OEMFACP 12000601 MSFT 00000097) [ 0.000000] ACPI: DSDT 000000006ff90450 08867 (v01 AS208 AS208141 00000141 INTL 20051117) [ 0.000000] ACPI: FACS 000000006ffa0000 00040 [ 0.000000] ACPI: APIC 000000006ff90390 00080 (v01 072709 APIC2049 20090727 MSFT 00000097) [ 0.000000] ACPI: MCFG 000000006ff90410 0003C (v01 072709 OEMMCFG 20090727 MSFT 00000097) [ 0.000000] ACPI: OEMB 000000006ffa0040 00073 (v01 072709 OEMB2049 20090727 MSFT 00000097) [ 0.000000] ACPI: AAFT 000000006ff98cc0 00027 (v01 072709 OEMAAFT 20090727 MSFT 00000097) [ 0.000000] ACPI: INFO 000000006ffa00c0 00124 (v01 072709 AMDINFO 20090727 MSFT 00000097) [ 0.000000] ACPI: NVHD 000000006ffa01f0 00284 (v01 072709 NVHDCP 20090727 MSFT 00000097) [ 0.000000] ACPI: SSDT 000000006ff98cf0 002B4 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000006ff90000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000006ff90000 [ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff] [ 0.000000] bootmap [0000000000017000 - 0000000000024ff7] pages e [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 006ff90000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00017d5938] TEXT DATA BSS ==> [0001000000 - 00017d5938] [ 0.000000] #3 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000] [ 0.000000] #4 [00017d6000 - 00017d612b] BRK ==> [00017d6000 - 00017d612b] [ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea00019fffff] PMD -> [ffff880001c00000-ffff8800035fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x0006ff90 [ 0.000000] On node 0 totalpages: 458526 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3824 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6215 pages used for memmap [ 0.000000] DMA32 zone: 448329 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at 70000000 (gap: 70000000:8ec00000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages at ffff8800017e7000, static data 83744 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 452153 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/sda1 ro vga=795 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 2064000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 1798848k/1834560k available (4161k kernel code, 456k absent, 35256k reserved, 2414k data, 576k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2700.226 MHz processor. [ 0.000014] spurious 8259A interrupt: IRQ7. [ 0.000037] Console: colour dummy device 80x25 [ 0.000039] console [tty0] enabled [ 0.001009] Calibrating delay loop (skipped), value calculated using timer frequency.. 5400.44 BogoMIPS (lpj=2700222) [ 0.001037] Security Framework initialized [ 0.001043] SELinux: Initializing. [ 0.001052] SELinux: Starting in permissive mode [ 0.001193] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002215] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.002669] Mount-cache hash table entries: 256 [ 0.002811] Initializing cgroup subsys ns [ 0.002816] Initializing cgroup subsys cpuacct [ 0.002821] Initializing cgroup subsys freezer [ 0.002837] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.002841] CPU: L2 Cache: 512K (64 bytes/line) [ 0.002845] CPU 0/0x0 -> Node 0 [ 0.002849] tseg: 0000000000 [ 0.002862] CPU: Physical Processor ID: 0 [ 0.002864] CPU: Processor Core ID: 0 [ 0.002867] mce: CPU supports 6 MCE banks [ 0.002877] using C1E aware idle routine [ 0.002880] Performance Counters: AMD PMU driver. [ 0.002886] ... version: 0 [ 0.002888] ... bit width: 48 [ 0.002891] ... generic counters: 4 [ 0.002893] ... value mask: 0000ffffffffffff [ 0.002896] ... max period: 00007fffffffffff [ 0.002899] ... fixed-purpose counters: 0 [ 0.002901] ... counter mask: 000000000000000f [ 0.003529] ACPI: Core revision 20090521 [ 0.015061] Setting APIC routing to flat [ 0.015530] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.025633] CPU0: AMD Athlon(tm) 7750 Dual-Core Processor stepping 03 [ 0.025996] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 5399.41 BogoMIPS (lpj=2699707) [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000999] CPU 1/0x1 -> Node 0 [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] mce: CPU supports 6 MCE banks [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.096633] CPU1: AMD Athlon(tm) 7750 Dual-Core Processor stepping 03 [ 0.096658] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.096995] Brought up 2 CPUs [ 0.096999] Total of 2 processors activated (10799.85 BogoMIPS). [ 0.097107] khelper used greatest stack depth: 5840 bytes left [ 0.098034] Booting paravirtualized kernel on bare hardware [ 0.098102] Time: 8:17:06 Date: 08/20/09 [ 0.098102] NET: Registered protocol family 16 [ 0.098115] node 0 link 0: io port [1000, ffffff] [ 0.098115] TOM: 0000000080000000 aka 2048M [ 0.098115] Fam 10h mmconf [fc000000, fdffffff] [ 0.098115] node 0 link 0: mmio [fc000000, fdffffff] ==> none [ 0.098115] node 0 link 0: mmio [80000000, fbffffff] [ 0.098115] node 0 link 0: mmio [fe000000, fe0bffff] [ 0.098115] node 0 link 0: mmio [a0000, bffff] [ 0.098115] bus: [00,07] on node 0 link 0 [ 0.098115] bus: 00 index 0 io port: [0, ffff] [ 0.098115] bus: 00 index 1 mmio: [80000000, fbffffff] [ 0.098115] bus: 00 index 2 mmio: [fe000000, fcffffffff] [ 0.098115] bus: 00 index 3 mmio: [a0000, bffff] [ 0.098115] ACPI: bus type pci registered [ 0.098115] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31 [ 0.098115] PCI: Not using MMCONFIG. [ 0.098115] PCI: Using configuration type 1 for base access [ 0.098115] PCI: Using configuration type 1 for extended access [ 0.103051] bio: create slab at 0 [ 0.104130] ACPI: EC: Look up EC in DSDT [ 0.116657] ACPI: Interpreter enabled [ 0.116662] ACPI: (supports S0 S1 S3 S5) [ 0.116678] ACPI: Using IOAPIC for interrupt routing [ 0.116731] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31 [ 0.122682] PCI: MCFG area at fc000000 reserved in ACPI motherboard resources [ 0.123147] PCI: Using MMCONFIG at fc000000 - fdffffff [ 0.136122] ACPI Warning: Incorrect checksum in table [OEMB] - 7C, should be 7B 20090521 tbutils-246 [ 0.136242] ACPI: No dock devices found. [ 0.137264] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.137290] pci 0000:00:01.0: reg 10 io port: [0x2f00-0x2fff] [ 0.137290] pci 0000:00:01.1: reg 10 io port: [0x2900-0x293f] [ 0.137290] pci 0000:00:01.1: reg 20 io port: [0x2d00-0x2d3f] [ 0.137290] pci 0000:00:01.1: reg 24 io port: [0x2e00-0x2e3f] [ 0.137290] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.137290] pci 0000:00:01.1: PME# disabled [ 0.137345] pci 0000:00:01.3: reg 10 32bit mmio: [0xfad80000-0xfadfffff] [ 0.137468] pci 0000:00:02.0: reg 10 32bit mmio: [0xfad7f000-0xfad7ffff] [ 0.137490] pci 0000:00:02.0: supports D1 D2 [ 0.137492] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.137496] pci 0000:00:02.0: PME# disabled [ 0.137518] pci 0000:00:02.1: reg 10 32bit mmio: [0xfad7ec00-0xfad7ecff] [ 0.137545] pci 0000:00:02.1: supports D1 D2 [ 0.137546] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.137551] pci 0000:00:02.1: PME# disabled [ 0.137577] pci 0000:00:04.0: reg 10 32bit mmio: [0xfad7d000-0xfad7dfff] [ 0.137598] pci 0000:00:04.0: supports D1 D2 [ 0.137600] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.137604] pci 0000:00:04.0: PME# disabled [ 0.137627] pci 0000:00:04.1: reg 10 32bit mmio: [0xfad7e800-0xfad7e8ff] [ 0.137983] pci 0000:00:04.1: supports D1 D2 [ 0.137984] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.137989] pci 0000:00:04.1: PME# disabled [ 0.138028] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf] [ 0.138092] pci 0000:00:09.0: reg 10 io port: [0xc480-0xc487] [ 0.138095] pci 0000:00:09.0: reg 14 io port: [0xc400-0xc403] [ 0.138098] pci 0000:00:09.0: reg 18 io port: [0xc080-0xc087] [ 0.138101] pci 0000:00:09.0: reg 1c io port: [0xc000-0xc003] [ 0.138104] pci 0000:00:09.0: reg 20 io port: [0xbc00-0xbc0f] [ 0.138108] pci 0000:00:09.0: reg 24 32bit mmio: [0xfad76000-0xfad77fff] [ 0.138144] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfad7c000-0xfad7cfff] [ 0.138147] pci 0000:00:0a.0: reg 14 io port: [0xb880-0xb887] [ 0.138150] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfad7e400-0xfad7e4ff] [ 0.138154] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfad7e000-0xfad7e00f] [ 0.138173] pci 0000:00:0a.0: supports D1 D2 [ 0.138175] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.138180] pci 0000:00:0a.0: PME# disabled [ 0.138209] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.138213] pci 0000:00:0b.0: PME# disabled [ 0.138419] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.138427] pci 0000:00:10.0: PME# disabled [ 0.138661] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.138670] pci 0000:00:12.0: PME# disabled [ 0.138798] pci 0000:01:09.0: reg 10 io port: [0xdc00-0xdc3f] [ 0.138829] pci 0000:01:09.0: supports D1 D2 [ 0.138853] pci 0000:01:0a.0: reg 10 32bit mmio: [0xfaeff800-0xfaefffff] [ 0.138885] pci 0000:01:0a.0: supports D1 D2 [ 0.138909] pci 0000:00:08.0: transparent bridge [ 0.138914] pci 0000:00:08.0: bridge io port: [0xd000-0xdfff] [ 0.138916] pci 0000:00:08.0: bridge 32bit mmio: [0xfae00000-0xfaefffff] [ 0.138937] pci 0000:02:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.138942] pci 0000:02:00.0: reg 14 64bit mmio: [0xf0000000-0xf7ffffff] [ 0.138947] pci 0000:02:00.0: reg 1c 64bit mmio: [0xee000000-0xefffffff] [ 0.138950] pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f] [ 0.138954] pci 0000:02:00.0: reg 30 32bit mmio: [0xfafe0000-0xfaffffff] [ 0.138981] pci 0000:00:0b.0: bridge io port: [0xe000-0xefff] [ 0.138984] pci 0000:00:0b.0: bridge 32bit mmio: [0xfaf00000-0xfbffffff] [ 0.138987] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xee000000-0xf7ffffff] [ 0.139055] pci 0000:00:10.0: bridge 64bit mmio pref: [0xf9e00000-0xf9efffff] [ 0.139128] pci 0000:00:12.0: bridge 64bit mmio pref: [0xf9f00000-0xf9ffffff] [ 0.139160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.139418] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.139497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT] [ 0.139553] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT] [ 0.139614] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.153169] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.153391] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10 [ 0.153609] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10 [ 0.154185] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.154403] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10 [ 0.154620] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled. [ 0.154836] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled. [ 0.155056] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled. [ 0.155273] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled. [ 0.155488] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled. [ 0.155708] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled. [ 0.155922] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled. [ 0.156144] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11 [ 0.156361] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled. [ 0.156576] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled. [ 0.156790] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled. [ 0.157007] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled. [ 0.157224] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled. [ 0.157440] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled. [ 0.157659] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled. [ 0.157878] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled. [ 0.158098] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled. [ 0.158315] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled. [ 0.158531] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled. [ 0.158749] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled. [ 0.158966] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled. [ 0.159184] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled. [ 0.159400] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled. [ 0.159616] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled. [ 0.159835] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled. [ 0.160060] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled. [ 0.160281] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled. [ 0.160499] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled. [ 0.160717] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled. [ 0.160932] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled. [ 0.161154] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled. [ 0.161374] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11 [ 0.161595] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15 [ 0.161816] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15 [ 0.162041] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11 [ 0.162260] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *15 [ 0.162480] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *7 [ 0.162702] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10 [ 0.162924] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.163179] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.163398] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10 [ 0.163616] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10 [ 0.163667] SCSI subsystem initialized [ 0.163978] libata version 3.00 loaded. [ 0.164017] usbcore: registered new interface driver usbfs [ 0.164017] usbcore: registered new interface driver hub [ 0.164017] usbcore: registered new device driver usb [ 0.164017] PCI: Using ACPI for IRQ routing [ 0.167007] NetLabel: Initializing [ 0.167010] NetLabel: domain hash size = 128 [ 0.167013] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.167027] NetLabel: unlabeled traffic allowed by default [ 0.170997] pnp: PnP ACPI init [ 0.171010] ACPI: bus type pnp registered [ 0.177004] pnp: PnP ACPI: found 12 devices [ 0.177008] ACPI: ACPI bus type pnp unregistered [ 0.177019] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.177024] system 00:04: ioport range 0x800-0x80f has been reserved [ 0.177029] system 00:04: ioport range 0x2000-0x207f has been reserved [ 0.177033] system 00:04: ioport range 0x2080-0x20ff has been reserved [ 0.177037] system 00:04: ioport range 0x2400-0x247f has been reserved [ 0.177041] system 00:04: ioport range 0x2480-0x24ff has been reserved [ 0.177045] system 00:04: ioport range 0x2800-0x287f has been reserved [ 0.177049] system 00:04: ioport range 0x2880-0x28ff has been reserved [ 0.177053] system 00:04: iomem range 0xfed04000-0xfed04fff has been reserved [ 0.177058] system 00:04: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.177066] system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.177071] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.177077] system 00:09: ioport range 0x290-0x29f has been reserved [ 0.177083] system 00:0a: iomem range 0xfc000000-0xfdffffff has been reserved [ 0.177090] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.177094] system 00:0b: iomem range 0xc0000-0xcffff has been reserved [ 0.177098] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved [ 0.177102] system 00:0b: iomem range 0x100000-0x7fffffff could not be reserved [ 0.177107] system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.182072] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.182077] pci 0000:00:08.0: IO window: 0xd000-0xdfff [ 0.182082] pci 0000:00:08.0: MEM window: 0xfae00000-0xfaefffff [ 0.182086] pci 0000:00:08.0: PREFETCH window: disabled [ 0.182091] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 [ 0.182094] pci 0000:00:0b.0: IO window: 0xe000-0xefff [ 0.182098] pci 0000:00:0b.0: MEM window: 0xfaf00000-0xfbffffff [ 0.182103] pci 0000:00:0b.0: PREFETCH window: 0x000000ee000000-0x000000f7ffffff [ 0.182108] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 [ 0.182112] pci 0000:00:10.0: IO window: disabled [ 0.182122] pci 0000:00:10.0: MEM window: disabled [ 0.182130] pci 0000:00:10.0: PREFETCH window: 0x000000f9e00000-0x000000f9efffff [ 0.182145] pci 0000:00:12.0: PCI bridge, secondary bus 0000:04 [ 0.182148] pci 0000:00:12.0: IO window: disabled [ 0.182158] pci 0000:00:12.0: MEM window: disabled [ 0.182166] pci 0000:00:12.0: PREFETCH window: 0x000000f9f00000-0x000000f9ffffff [ 0.182185] pci 0000:00:08.0: setting latency timer to 64 [ 0.182189] pci 0000:00:0b.0: setting latency timer to 64 [ 0.182507] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19 [ 0.182512] alloc irq_desc for 19 on node 0 [ 0.182513] alloc kstat_irqs on node 0 [ 0.182521] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 [ 0.182531] pci 0000:00:10.0: setting latency timer to 64 [ 0.182841] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18 [ 0.182846] alloc irq_desc for 18 on node 0 [ 0.182847] alloc kstat_irqs on node 0 [ 0.182853] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18 [ 0.182863] pci 0000:00:12.0: setting latency timer to 64 [ 0.182870] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.182872] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.182875] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.182877] pci_bus 0000:01: resource 1 mem: [0xfae00000-0xfaefffff] [ 0.182879] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.182881] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.182885] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.182887] pci_bus 0000:02: resource 1 mem: [0xfaf00000-0xfbffffff] [ 0.182889] pci_bus 0000:02: resource 2 pref mem [0xee000000-0xf7ffffff] [ 0.182891] pci_bus 0000:03: resource 2 pref mem [0xf9e00000-0xf9efffff] [ 0.182893] pci_bus 0000:04: resource 2 pref mem [0xf9f00000-0xf9ffffff] [ 0.182919] NET: Registered protocol family 2 [ 0.183035] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.183746] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.185595] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.186066] TCP: Hash tables configured (established 262144 bind 65536) [ 0.186071] TCP reno registered [ 0.186189] NET: Registered protocol family 1 [ 0.187444] microcode: CPU0: patch_level=0x1000083 [ 0.187453] microcode: CPU1: patch_level=0x1000083 [ 0.187503] Microcode Update Driver: v2.00 , Peter Oruba [ 0.187510] Scanning for low memory corruption every 60 seconds [ 0.187733] audit: initializing netlink socket (disabled) [ 0.187746] type=2000 audit(1250756225.186:1): initialized [ 0.193103] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.196145] msgmni has been set to 3513 [ 0.196236] SELinux: Registering netfilter hooks [ 0.196626] alg: No test for stdrng (krng) [ 0.196730] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.196737] io scheduler noop registered [ 0.196740] io scheduler anticipatory registered [ 0.196742] io scheduler deadline registered [ 0.196792] io scheduler cfq registered (default) [ 0.280067] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.280167] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.280274] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.280379] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 0.280503] pci 0000:02:00.0: Boot video device [ 0.280859] alloc irq_desc for 24 on node 0 [ 0.280861] alloc kstat_irqs on node 0 [ 0.280880] pcieport-driver 0000:00:10.0: irq 24 for MSI/MSI-X [ 0.280900] pcieport-driver 0000:00:10.0: setting latency timer to 64 [ 0.281322] alloc irq_desc for 25 on node 0 [ 0.281324] alloc kstat_irqs on node 0 [ 0.281339] pcieport-driver 0000:00:12.0: irq 25 for MSI/MSI-X [ 0.281358] pcieport-driver 0000:00:12.0: setting latency timer to 64 [ 0.281582] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.281849] vesafb: framebuffer at 0xef000000, mapped to 0xffffc90002980000, using 10240k, total 14336k [ 0.281855] vesafb: mode is 1280x1024x32, linelength=5120, pages=1 [ 0.281858] vesafb: scrolling: redraw [ 0.281862] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.300368] Console: switching to colour frame buffer device 160x64 [ 0.317544] fb0: VESA VGA frame buffer device [ 0.325374] Non-volatile memory driver v1.3 [ 0.325464] Linux agpgart interface v0.103 [ 0.327087] brd: module loaded [ 0.327399] ahci 0000:00:09.0: version 3.0 [ 0.327740] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 0.327862] alloc irq_desc for 23 on node 0 [ 0.327864] alloc kstat_irqs on node 0 [ 0.327872] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 0.328076] alloc irq_desc for 26 on node 0 [ 0.328077] alloc kstat_irqs on node 0 [ 0.328082] ahci 0000:00:09.0: irq 26 for MSI/MSI-X [ 0.328134] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.328307] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio [ 0.328442] ahci 0000:00:09.0: setting latency timer to 64 [ 0.328851] scsi0 : ahci [ 0.329066] scsi1 : ahci [ 0.329200] scsi2 : ahci [ 0.329334] scsi3 : ahci [ 0.329465] scsi4 : ahci [ 0.329602] scsi5 : ahci [ 0.329797] ata1: SATA max UDMA/133 abar m8192@0xfad76000 port 0xfad76100 irq 26 [ 0.329958] ata2: SATA max UDMA/133 abar m8192@0xfad76000 port 0xfad76180 irq 26 [ 0.330112] ata3: SATA max UDMA/133 abar m8192@0xfad76000 port 0xfad76200 irq 26 [ 0.330268] ata4: SATA max UDMA/133 abar m8192@0xfad76000 port 0xfad76280 irq 26 [ 0.330423] ata5: SATA max UDMA/133 abar m8192@0xfad76000 port 0xfad76300 irq 26 [ 0.330576] ata6: SATA max UDMA/133 abar m8192@0xfad76000 port 0xfad76380 irq 26 [ 0.330744] work_for_cpu used greatest stack depth: 5408 bytes left [ 0.330975] pata_amd 0000:00:06.0: version 0.4.1 [ 0.331008] pata_amd 0000:00:06.0: setting latency timer to 64 [ 0.331072] scsi6 : pata_amd [ 0.331268] scsi7 : pata_amd [ 0.332590] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.332735] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.332896] work_for_cpu used greatest stack depth: 4952 bytes left [ 0.333074] console [netcon0] enabled [ 0.333151] netconsole: network logging started [ 0.333379] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.333536] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96 [ 0.333891] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 0.334017] alloc irq_desc for 22 on node 0 [ 0.334019] alloc kstat_irqs on node 0 [ 0.334027] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 0.334209] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.334212] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.334341] drivers/usb/core/inode.c: creating file 'devices' [ 0.334344] drivers/usb/core/inode.c: creating file '001' [ 0.334402] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.334560] ehci_hcd 0000:00:02.1: reset hcs_params 0x101f86 dbg=1 cc=1 pcc=15 !ppc ports=6 [ 0.334567] ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0 [ 0.334570] ehci_hcd 0000:00:02.1: reset hcc_params a087 caching frame 256/512/1024 park 64 bit addr [ 0.334588] ehci_hcd 0000:00:02.1: park 0 [ 0.334592] ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 0.334601] ehci_hcd 0000:00:02.1: debug port 1 [ 0.337097] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.337099] ehci_hcd 0000:00:02.1: supports USB remote wakeup [ 0.337114] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfad7ec00 [ 0.339664] ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 0.339671] ehci_hcd 0000:00:02.1: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 0.344948] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.347599] usb usb1: default language 0x0409 [ 0.347604] usb usb1: udev 1, busnum 1, minor = 0 [ 0.347606] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.350364] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.353208] usb usb1: Product: EHCI Host Controller [ 0.356103] usb usb1: Manufacturer: Linux 2.6.31-rc6 ehci_hcd [ 0.359072] usb usb1: SerialNumber: 0000:00:02.1 [ 0.362121] usb usb1: uevent [ 0.362150] usb usb1: usb_probe_device [ 0.362152] usb usb1: configuration #1 chosen from 1 choice [ 0.365264] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.365275] usb 1-0:1.0: uevent [ 0.365304] hub 1-0:1.0: usb_probe_interface [ 0.365305] hub 1-0:1.0: usb_probe_interface - got id [ 0.365307] hub 1-0:1.0: USB hub found [ 0.368459] hub 1-0:1.0: 6 ports detected [ 0.371645] hub 1-0:1.0: standalone hub [ 0.371646] hub 1-0:1.0: no power switching (usb 1.0) [ 0.371648] hub 1-0:1.0: individual port over-current protection [ 0.371650] hub 1-0:1.0: power on to power good time: 20ms [ 0.371654] hub 1-0:1.0: local power source is good [ 0.371656] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 0.371679] drivers/usb/core/inode.c: creating file '001' [ 0.372037] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21 [ 0.375416] alloc irq_desc for 21 on node 0 [ 0.375417] alloc kstat_irqs on node 0 [ 0.375424] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21 [ 0.378910] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 0.378913] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 0.382422] drivers/usb/core/inode.c: creating file '002' [ 0.382465] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 0.386090] ehci_hcd 0000:00:04.1: reset hcs_params 0x101f86 dbg=1 cc=1 pcc=15 !ppc ports=6 [ 0.386097] ehci_hcd 0000:00:04.1: reset portroute 0 0 0 0 0 0 [ 0.386100] ehci_hcd 0000:00:04.1: reset hcc_params a087 caching frame 256/512/1024 park 64 bit addr [ 0.386114] ehci_hcd 0000:00:04.1: park 0 [ 0.386118] ehci_hcd 0000:00:04.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 0.386125] ehci_hcd 0000:00:04.1: debug port 1 [ 0.389746] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 0.389748] ehci_hcd 0000:00:04.1: supports USB remote wakeup [ 0.389762] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfad7e800 [ 0.393508] ehci_hcd 0000:00:04.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 0.393514] ehci_hcd 0000:00:04.1: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 0.398936] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 0.402703] usb usb2: default language 0x0409 [ 0.402707] usb usb2: udev 1, busnum 2, minor = 128 [ 0.402709] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.406586] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.410557] usb usb2: Product: EHCI Host Controller [ 0.414580] usb usb2: Manufacturer: Linux 2.6.31-rc6 ehci_hcd [ 0.418687] usb usb2: SerialNumber: 0000:00:04.1 [ 0.422848] usb usb2: uevent [ 0.422875] usb usb2: usb_probe_device [ 0.422877] usb usb2: configuration #1 chosen from 1 choice [ 0.427099] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 0.427112] usb 2-0:1.0: uevent [ 0.427142] hub 2-0:1.0: usb_probe_interface [ 0.427143] hub 2-0:1.0: usb_probe_interface - got id [ 0.427145] hub 2-0:1.0: USB hub found [ 0.431318] hub 2-0:1.0: 6 ports detected [ 0.435422] hub 2-0:1.0: standalone hub [ 0.435424] hub 2-0:1.0: no power switching (usb 1.0) [ 0.435425] hub 2-0:1.0: individual port over-current protection [ 0.435427] hub 2-0:1.0: power on to power good time: 20ms [ 0.435432] hub 2-0:1.0: local power source is good [ 0.435434] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 0.435454] drivers/usb/core/inode.c: creating file '001' [ 0.435505] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.439719] ohci_hcd: block sizes: ed 80 td 96 [ 0.440061] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20 [ 0.444292] alloc irq_desc for 20 on node 0 [ 0.444294] alloc kstat_irqs on node 0 [ 0.444300] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 [ 0.448649] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.448652] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.452944] drivers/usb/core/inode.c: creating file '003' [ 0.452990] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 0.457283] ohci_hcd 0000:00:02.0: created debug files [ 0.457284] ohci_hcd 0000:00:02.0: supports USB remote wakeup [ 0.457299] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfad7f000 [ 0.513919] ohci_hcd 0000:00:02.0: OHCI controller state [ 0.513922] ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers [ 0.513925] ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3 [ 0.513928] ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0 [ 0.513931] ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF [ 0.513933] ohci_hcd 0000:00:02.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 0.513938] ohci_hcd 0000:00:02.0: hcca frame #0003 [ 0.513942] ohci_hcd 0000:00:02.0: roothub.a 01001206 POTPGT=1 NOCP NPS NDP=6(6) [ 0.513944] ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 0.513948] ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE [ 0.513951] ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS [ 0.513954] ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS [ 0.513957] ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS [ 0.513960] ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS [ 0.513963] ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS [ 0.513967] ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS [ 0.513974] usb usb3: default language 0x0409 [ 0.513978] usb usb3: udev 1, busnum 3, minor = 256 [ 0.513980] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.518257] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.522530] usb usb3: Product: OHCI Host Controller [ 0.526830] usb usb3: Manufacturer: Linux 2.6.31-rc6 ohci_hcd [ 0.531233] usb usb3: SerialNumber: 0000:00:02.0 [ 0.535695] usb usb3: uevent [ 0.535721] usb usb3: usb_probe_device [ 0.535723] usb usb3: configuration #1 chosen from 1 choice [ 0.540219] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 0.540231] usb 3-0:1.0: uevent [ 0.540258] hub 3-0:1.0: usb_probe_interface [ 0.540260] hub 3-0:1.0: usb_probe_interface - got id [ 0.540262] hub 3-0:1.0: USB hub found [ 0.544812] hub 3-0:1.0: 6 ports detected [ 0.549287] hub 3-0:1.0: standalone hub [ 0.549288] hub 3-0:1.0: no power switching (usb 1.0) [ 0.549290] hub 3-0:1.0: no over-current protection [ 0.549292] hub 3-0:1.0: power on to power good time: 2ms [ 0.549295] hub 3-0:1.0: local power source is good [ 0.549297] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 0.549309] drivers/usb/core/inode.c: creating file '001' [ 0.549665] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23 [ 0.554251] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 23 (level, low) -> IRQ 23 [ 0.558991] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 0.558994] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 0.563767] drivers/usb/core/inode.c: creating file '004' [ 0.563808] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 0.568695] ohci_hcd 0000:00:04.0: created debug files [ 0.568696] ohci_hcd 0000:00:04.0: supports USB remote wakeup [ 0.568711] ohci_hcd 0000:00:04.0: irq 23, io mem 0xfad7d000 [ 0.574908] ehci_hcd 0000:00:02.1: GetStatus port 2 status 001403 POWER sig=k CSC CONNECT [ 0.574911] hub 1-0:1.0: port 2: status 0501 change 0001 [ 0.574916] ehci_hcd 0000:00:02.1: GetStatus port 3 status 001403 POWER sig=k CSC CONNECT [ 0.574919] hub 1-0:1.0: port 3: status 0501 change 0001 [ 0.574925] ehci_hcd 0000:00:02.1: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT [ 0.574927] hub 1-0:1.0: port 4: status 0501 change 0001 [ 0.574932] ehci_hcd 0000:00:02.1: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT [ 0.574935] hub 1-0:1.0: port 5: status 0501 change 0001 [ 0.596901] ehci_hcd 0000:00:04.1: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT [ 0.596905] hub 2-0:1.0: port 4: status 0501 change 0001 [ 0.625896] ohci_hcd 0000:00:04.0: OHCI controller state [ 0.625898] ohci_hcd 0000:00:04.0: OHCI 1.0, NO legacy support registers [ 0.625901] ohci_hcd 0000:00:04.0: control 0x683 RWE RWC HCFS=operational CBSR=3 [ 0.625904] ohci_hcd 0000:00:04.0: cmdstatus 0x00000 SOC=0 [ 0.625906] ohci_hcd 0000:00:04.0: intrstatus 0x00000004 SF [ 0.625909] ohci_hcd 0000:00:04.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 0.625914] ohci_hcd 0000:00:04.0: hcca frame #0003 [ 0.625917] ohci_hcd 0000:00:04.0: roothub.a 01001206 POTPGT=1 NOCP NPS NDP=6(6) [ 0.625919] ohci_hcd 0000:00:04.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 0.625922] ohci_hcd 0000:00:04.0: roothub.status 00008000 DRWE [ 0.625925] ohci_hcd 0000:00:04.0: roothub.portstatus [0] 0x00000100 PPS [ 0.625928] ohci_hcd 0000:00:04.0: roothub.portstatus [1] 0x00000100 PPS [ 0.625931] ohci_hcd 0000:00:04.0: roothub.portstatus [2] 0x00000100 PPS [ 0.625934] ohci_hcd 0000:00:04.0: roothub.portstatus [3] 0x00000100 PPS [ 0.625937] ohci_hcd 0000:00:04.0: roothub.portstatus [4] 0x00000100 PPS [ 0.625941] ohci_hcd 0000:00:04.0: roothub.portstatus [5] 0x00000100 PPS [ 0.625949] usb usb4: default language 0x0409 [ 0.625953] usb usb4: udev 1, busnum 4, minor = 384 [ 0.625955] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.630869] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.635781] usb usb4: Product: OHCI Host Controller [ 0.640715] usb usb4: Manufacturer: Linux 2.6.31-rc6 ohci_hcd [ 0.645666] usb usb4: SerialNumber: 0000:00:04.0 [ 0.650931] ata7.00: ATAPI: LITE-ON DVDRW SHW-160P6S, PS0A, max UDMA/66 [ 0.655968] ata7.01: ATAPI: SAMSUNG CD-R/RW SW-248F, R602, max UDMA/33 [ 0.661055] ata7: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x15) [ 0.661059] ata7: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x15) [ 0.661212] usb usb4: uevent [ 0.661241] usb usb4: usb_probe_device [ 0.661243] usb usb4: configuration #1 chosen from 1 choice [ 0.666271] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 0.666282] usb 4-0:1.0: uevent [ 0.666309] hub 4-0:1.0: usb_probe_interface [ 0.666310] hub 4-0:1.0: usb_probe_interface - got id [ 0.666312] hub 4-0:1.0: USB hub found [ 0.671284] hub 4-0:1.0: 6 ports detected [ 0.676161] hub 4-0:1.0: standalone hub [ 0.676162] hub 4-0:1.0: no power switching (usb 1.0) [ 0.676164] hub 4-0:1.0: no over-current protection [ 0.676165] hub 4-0:1.0: power on to power good time: 2ms [ 0.676314] hub 4-0:1.0: local power source is good [ 0.676316] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 0.676329] drivers/usb/core/inode.c: creating file '001' [ 0.676380] uhci_hcd: USB Universal Host Controller Interface driver [ 0.681441] Initializing USB Mass Storage driver... [ 0.686400] usbcore: registered new interface driver usb-storage [ 0.691341] USB Mass Storage support registered. [ 0.695202] ata7.00: configured for UDMA/66 [ 0.701298] usbcore: registered new interface driver libusual [ 0.701310] ata7.01: configured for UDMA/33 [ 0.706879] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 0.711342] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.713866] hub 1-0:1.0: state 7 ports 6 chg 003c evt 0000 [ 0.713871] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 0.713878] ehci_hcd 0000:00:02.1: port 2 low speed --> companion [ 0.716363] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.721940] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.727088] mice: PS/2 mouse device common for all mice [ 0.732354] rtc_cmos 00:05: RTC can wake from S4 [ 0.737539] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.742691] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 0.747965] cpuidle: using governor ladder [ 0.753110] cpuidle: using governor menu [ 0.756533] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.764246] usbcore: registered new interface driver hiddev [ 0.764860] ehci_hcd 0000:00:02.1: GetStatus port 2 status 003402 POWER OWNER sig=k CSC [ 0.764879] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 0.764884] ehci_hcd 0000:00:02.1: port 3 low speed --> companion [ 0.769469] usbcore: registered new interface driver usbhid [ 0.774583] usbhid: v2.6:USB HID core driver [ 0.779759] Advanced Linux Sound Architecture Driver Version 1.0.20. [ 0.785191] ALSA device list: [ 0.790302] No soundcards found. [ 0.795437] Netfilter messages via NETLINK v0.30. [ 0.800547] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 0.805696] ata5: SATA link down (SStatus 0 SControl 300) [ 0.810848] ata4: SATA link down (SStatus 0 SControl 300) [ 0.815847] ehci_hcd 0000:00:02.1: GetStatus port 3 status 003402 POWER OWNER sig=k CSC [ 0.815866] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 0.815966] ata6: SATA link down (SStatus 0 SControl 300) [ 0.821014] ata3: SATA link down (SStatus 0 SControl 300) [ 0.826021] ata1: SATA link down (SStatus 0 SControl 300) [ 0.831181] ctnetlink v0.93: registering with nfnetlink. [ 0.836587] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.841482] TCP cubic registered [ 0.846319] Initializing XFRM netlink socket [ 0.851354] NET: Registered protocol family 10 [ 0.856827] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 0.861704] IPv6 over IPv4 tunneling driver [ 0.866973] NET: Registered protocol family 17 [ 0.871071] ehci_hcd 0000:00:02.1: port 4 high speed [ 0.871075] ehci_hcd 0000:00:02.1: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT [ 0.871885] RPC: Registered udp transport module. [ 0.876623] RPC: Registered tcp transport module. [ 0.881453] registered taskstats version 1 [ 0.886261] Magic number: 5:82:271 [ 0.911531] Switched to high resolution mode on CPU 1 [ 0.911833] Switched to high resolution mode on CPU 0 [ 0.912146] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.913034] usb 1-4: new high speed USB device using ehci_hcd and address 4 [ 0.922269] ata2.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133 [ 0.927037] ata2.00: 488397168 sectors, multi 0: LBA48 [ 0.932408] ata2.00: configured for UDMA/133 [ 0.937201] scsi 1:0:0:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5 [ 0.942204] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 0.947064] sd 1:0:0:0: [sda] Write Protect is off [ 0.951821] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.951835] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.956798] sda: [ 0.956958] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 0.963216] ehci_hcd 0000:00:02.1: port 4 high speed [ 0.963219] ehci_hcd 0000:00:02.1: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT [ 0.967462] scsi 6:0:0:0: CD-ROM LITE-ON DVDRW SHW-160P6S PS0A PQ: 0 ANSI: 5 [ 0.969074] sda1 sda2 [ 0.977426] sd 1:0:0:0: [sda] Attached SCSI disk [ 0.985874] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 0.990760] Uniform CD-ROM driver Revision: 3.20 [ 0.995768] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 0.995842] sr 6:0:0:0: Attached scsi generic sg1 type 5 [ 1.002210] scsi 6:0:1:0: CD-ROM SAMSUNG CD-R/RW SW-248F R602 PQ: 0 ANSI: 5 [ 1.010598] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.015673] sr 6:0:1:0: Attached scsi CD-ROM sr1 [ 1.015747] sr 6:0:1:0: Attached scsi generic sg2 type 5 [ 1.020799] ata8: port disabled. ignoring. [ 1.020980] EXT3-fs: sda1: couldn't mount because of unsupported optional features (240). [ 1.027626] usb 1-4: default language 0x0409 [ 1.028499] usb 1-4: udev 4, busnum 1, minor = 3 [ 1.028501] usb 1-4: New USB device found, idVendor=058f, idProduct=6362 [ 1.031200] EXT4-fs (sda1): barriers enabled [ 1.038809] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.043988] usb 1-4: Product: Mass Storage Device [ 1.049081] usb 1-4: Manufacturer: Generic [ 1.053263] kjournald2 starting: pid 740, dev sda1:8, commit interval 5 seconds [ 1.053281] EXT4-fs (sda1): delayed allocation enabled [ 1.053283] EXT4-fs: file extents enabled [ 1.053431] EXT4-fs: mballoc enabled [ 1.053440] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 1.053457] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 1.084394] usb 1-4: SerialNumber: 058F63626376 [ 1.084400] Freeing unused kernel memory: 576k freed [ 1.084692] Write protecting the kernel read-only data: 6060k [ 1.099589] usb 1-4: uevent [ 1.148905] usb 1-4: usb_probe_device [ 1.148907] usb 1-4: configuration #1 chosen from 1 choice [ 1.154118] usb 1-4: adding 1-4:1.0 (config #1, interface 0) [ 1.154135] usb 1-4:1.0: uevent [ 1.154188] usb-storage 1-4:1.0: usb_probe_interface [ 1.154192] usb-storage 1-4:1.0: usb_probe_interface - got id [ 1.154243] scsi8 : SCSI emulation for USB Mass Storage devices [ 1.159397] usb-storage: device found at 4 [ 1.159399] usb-storage: waiting for device to settle before scanning [ 1.159415] drivers/usb/core/inode.c: creating file '004' [ 1.159433] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s [ 1.210009] ehci_hcd 0000:00:02.1: port 5 full speed --> companion [ 1.210014] ehci_hcd 0000:00:02.1: GetStatus port 5 status 003001 POWER OWNER sig=se0 CONNECT [ 1.210029] hub 1-0:1.0: port 5 not reset yet, waiting 50ms [ 1.261140] ehci_hcd 0000:00:02.1: GetStatus port 5 status 003802 POWER OWNER sig=j CSC [ 1.261154] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0020 [ 1.261159] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 000c [ 1.261165] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS [ 1.261169] hub 3-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 1.365013] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 1.454017] ohci_hcd 0000:00:04.0: auto-stop root hub [ 1.471011] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS [ 1.522019] usb 3-2: new low speed USB device using ohci_hcd and address 2 [ 1.636137] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS [ 1.715835] usb 3-2: skipped 1 descriptor after interface [ 1.718826] usb 3-2: default language 0x0409 [ 1.742830] usb 3-2: udev 2, busnum 3, minor = 257 [ 1.742832] usb 3-2: New USB device found, idVendor=051d, idProduct=0002 [ 1.748222] usb 3-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.753651] usb 3-2: Product: Back-UPS ES 750 FW:819.z2.D USB FW:z2 [ 1.759068] usb 3-2: Manufacturer: APC [ 1.764455] usb 3-2: SerialNumber: 3B0609X05224 [ 1.769892] usb 3-2: uevent [ 1.769941] usb 3-2: usb_probe_device [ 1.769944] usb 3-2: configuration #1 chosen from 1 choice [ 1.776825] usb 3-2: adding 3-2:1.0 (config #1, interface 0) [ 1.776836] usb 3-2:1.0: uevent [ 1.776875] usbhid 3-2:1.0: usb_probe_interface [ 1.776877] usbhid 3-2:1.0: usb_probe_interface - got id [ 2.020018] async/6 used greatest stack depth: 4880 bytes left [ 2.022804] drivers/usb/core/file.c: looking for a minor, starting at 96 [ 2.022963] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 750 FW:819.z2.D USB FW:z2] on usb-0000:00:02.0-2/input0 [ 2.022982] drivers/usb/core/inode.c: creating file '002' [ 2.023006] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS [ 2.023011] hub 3-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s [ 2.126013] hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301 [ 2.232010] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS [ 2.283012] usb 3-3: new low speed USB device using ohci_hcd and address 3 [ 2.391010] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS [ 2.467766] usb 3-3: skipped 1 descriptor after interface [ 2.470764] usb 3-3: default language 0x0409 [ 2.478764] usb 3-3: udev 3, busnum 3, minor = 258 [ 2.478766] usb 3-3: New USB device found, idVendor=046d, idProduct=c50e [ 2.478768] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.478770] usb 3-3: Product: USB RECEIVER [ 2.478772] usb 3-3: Manufacturer: Logitech [ 2.478818] usb 3-3: uevent [ 2.478869] usb 3-3: usb_probe_device [ 2.478872] usb 3-3: configuration #1 chosen from 1 choice [ 2.481765] usb 3-3: adding 3-3:1.0 (config #1, interface 0) [ 2.481776] usb 3-3:1.0: uevent [ 2.481822] usbhid 3-3:1.0: usb_probe_interface [ 2.481824] usbhid 3-3:1.0: usb_probe_interface - got id [ 2.493971] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input1 [ 2.494070] generic-usb 0003:046D:C50E.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:02.0-3/input0 [ 2.494084] drivers/usb/core/inode.c: creating file '003' [ 2.494101] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [4] = 0x00010101 CSC PPS CCS [ 2.494106] hub 3-0:1.0: port 5, status 0101, change 0001, 12 Mb/s [ 2.598010] hub 3-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x101 [ 2.704013] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS [ 2.755009] usb 3-5: new full speed USB device using ohci_hcd and address 4 [ 2.864010] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS [ 2.930009] usb 3-5: ep0 maxpacket = 8 [ 2.942726] usb 3-5: skipped 4 descriptors after interface [ 2.952725] usb 3-5: skipped 4 descriptors after interface [ 2.957725] usb 3-5: default language 0x0409 [ 2.968724] usb 3-5: udev 4, busnum 3, minor = 259 [ 2.968725] usb 3-5: New USB device found, idVendor=22b8, idProduct=4902 [ 2.968727] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.968729] usb 3-5: Product: Motorola Phone (V196) [ 2.968731] usb 3-5: Manufacturer: Motorola Inc. [ 2.968758] usb 3-5: uevent [ 2.968797] usb 3-5: usb_probe_device [ 2.968799] usb 3-5: configuration #1 chosen from 2 choices [ 2.978723] usb 3-5: adding 3-5:1.0 (config #1, interface 0) [ 2.983724] usb 3-5:1.0: uevent [ 2.983775] usb 3-5: adding 3-5:1.1 (config #1, interface 1) [ 2.988723] usb 3-5:1.1: uevent [ 2.988788] drivers/usb/core/inode.c: creating file '004' [ 2.988801] hub 2-0:1.0: state 7 ports 6 chg 0010 evt 0000 [ 2.988807] hub 2-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 3.039364] ehci_hcd 0000:00:04.1: port 4 high speed [ 3.039369] ehci_hcd 0000:00:04.1: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT [ 3.090019] usb 2-4: new high speed USB device using ehci_hcd and address 2 [ 3.141378] ehci_hcd 0000:00:04.1: port 4 high speed [ 3.141383] ehci_hcd 0000:00:04.1: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT [ 3.204795] usb 2-4: default language 0x0409 [ 3.205170] usb 2-4: udev 2, busnum 2, minor = 129 [ 3.205172] usb 2-4: New USB device found, idVendor=0930, idProduct=6540 [ 3.205174] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.205176] usb 2-4: Product: USB Flash Memory [ 3.205178] usb 2-4: SerialNumber: 02D10370A1F149D5 [ 3.205223] usb 2-4: uevent [ 3.205236] usb 2-4: usb_probe_device [ 3.205238] usb 2-4: configuration #1 chosen from 1 choice [ 3.205296] usb 2-4: adding 2-4:1.0 (config #1, interface 0) [ 3.205306] usb 2-4:1.0: uevent [ 3.205319] usb-storage 2-4:1.0: usb_probe_interface [ 3.205322] usb-storage 2-4:1.0: usb_probe_interface - got id [ 3.205370] scsi9 : SCSI emulation for USB Mass Storage devices [ 3.205438] drivers/usb/core/inode.c: creating file '002' [ 3.205453] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 3.205457] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0020 [ 3.205463] usb-storage: device found at 2 [ 3.205464] usb-storage: waiting for device to settle before scanning [ 3.297762] udev: starting version 145 [ 3.297767] udevd used greatest stack depth: 4272 bytes left [ 3.311198] usb 2-4: uevent [ 3.416440] usb usb3: uevent [ 3.416457] usb 3-0:1.0: uevent [ 3.416474] usb 3-2: uevent [ 3.416487] usb 3-2:1.0: uevent [ 3.416543] usb 3-3: uevent [ 3.416558] usb 3-3:1.0: uevent [ 3.416651] usb 3-5: uevent [ 3.416664] usb 3-5:1.0: uevent [ 3.416679] usb 3-5:1.1: uevent [ 3.416718] usb usb1: uevent [ 3.416731] usb 1-0:1.0: uevent [ 3.416747] usb 1-4: uevent [ 3.416760] usb 1-4:1.0: uevent [ 3.416823] usb usb4: uevent [ 3.416836] usb 4-0:1.0: uevent [ 3.416872] usb usb2: uevent [ 3.416884] usb 2-0:1.0: uevent [ 3.416899] usb 2-4: uevent [ 3.416914] usb 2-4:1.0: uevent [ 3.422486] usb usb3: uevent [ 3.423061] usb usb1: uevent [ 3.426847] usb 3-3: uevent [ 3.432481] usb 3-2: uevent [ 3.432509] usb 3-5: uevent [ 3.436501] usb usb4: uevent [ 3.436569] usb usb2: uevent [ 3.440115] usb 1-4: uevent [ 3.443333] usb 2-4: uevent [ 3.480971] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 3.480979] ACPI: Power Button [PWRF] [ 3.481053] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 3.481057] ACPI: Power Button [PWRB] [ 3.584229] processor LNXCPU:00: registered as cooling_device0 [ 3.584260] processor LNXCPU:01: registered as cooling_device1 [ 3.963903] usb 3-3:1.0: uevent [ 3.963991] usb 3-3: uevent [ 3.966697] usb 3-3:1.0: uevent [ 3.966777] usb 3-3: uevent [ 3.967680] usb 3-3:1.0: uevent [ 3.968949] usb 3-3:1.0: uevent [ 4.015259] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 4.015640] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 [ 4.015645] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 [ 4.015650] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 4.068376] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:19:66:bf:9a:d8 [ 4.068380] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3 [ 4.165272] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17 [ 4.165277] alloc irq_desc for 17 on node 0 [ 4.165279] alloc kstat_irqs on node 0 [ 4.165289] EMU10K1_Audigy 0000:01:09.0: PCI INT A -> Link[LNKB] -> GSI 17 (level, low) -> IRQ 17 [ 4.168386] Audigy2 value: Special config. [ 4.480352] nvidia: module license 'NVIDIA' taints kernel. [ 4.480356] Disabling lock debugging due to kernel taint [ 4.737148] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 21 [ 4.737153] nvidia 0000:02:00.0: PCI INT A -> Link[SGRU] -> GSI 21 (level, low) -> IRQ 21 [ 4.737161] nvidia 0000:02:00.0: setting latency timer to 64 [ 4.737471] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.31 Tue Jul 28 17:52:27 PDT 2009 [ 5.211989] EXT4-fs (sda1): internal journal on sda1:8 [ 5.367324] EXT4-fs (sda2): barriers enabled [ 5.405962] kjournald2 starting: pid 2343, dev sda2:8, commit interval 5 seconds [ 5.406159] EXT4-fs (sda2): internal journal on sda2:8 [ 5.406162] EXT4-fs (sda2): delayed allocation enabled [ 5.406164] EXT4-fs: file extents enabled [ 5.407654] EXT4-fs: mballoc enabled [ 5.407668] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 5.489964] Adding 1048568k swap on /swapfile. Priority:-1 extents:4 across:3104760k [ 5.701018] hub 4-0:1.0: hub_suspend [ 5.701026] usb usb4: bus auto-suspend [ 5.701030] ohci_hcd 0000:00:04.0: suspend root hub [ 6.161472] scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 6.161604] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 6.162971] scsi 8:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 6.163055] sd 8:0:0:1: Attached scsi generic sg4 type 0 [ 6.163926] scsi 8:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0 [ 6.164007] sd 8:0:0:2: Attached scsi generic sg5 type 0 [ 6.164749] scsi 8:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 6.164824] sd 8:0:0:3: Attached scsi generic sg6 type 0 [ 6.165852] usb-storage: device scan complete [ 6.179429] usb 1-4:1.0: uevent [ 6.179526] usb 1-4: uevent [ 6.180330] sd 8:0:0:0: [sdb] Attached SCSI removable disk [ 6.180961] sd 8:0:0:1: [sdc] Attached SCSI removable disk [ 6.181302] usb 1-4:1.0: uevent [ 6.181585] sd 8:0:0:2: [sdd] Attached SCSI removable disk [ 6.182207] sd 8:0:0:3: [sde] Attached SCSI removable disk [ 6.190679] usb 1-4:1.0: uevent [ 6.190763] usb 1-4: uevent [ 6.191695] usb 1-4:1.0: uevent [ 6.191792] usb 1-4: uevent [ 6.191910] usb 1-4:1.0: uevent [ 6.202667] usb 1-4:1.0: uevent [ 6.202752] usb 1-4: uevent [ 6.203822] usb 1-4:1.0: uevent [ 6.203877] usb 1-4:1.0: uevent [ 8.207150] scsi 9:0:0:0: Direct-Access USB Flash Memory 6.50 PQ: 0 ANSI: 0 CCS [ 8.207292] sd 9:0:0:0: Attached scsi generic sg7 type 0 [ 8.207439] usb-storage: device scan complete [ 8.208513] sd 9:0:0:0: [sdf] 3903487 512-byte logical blocks: (1.99 GB/1.86 GiB) [ 8.210019] sd 9:0:0:0: [sdf] Write Protect is off [ 8.210022] sd 9:0:0:0: [sdf] Mode Sense: 45 00 00 08 [ 8.210024] sd 9:0:0:0: [sdf] Assuming drive cache: write through [ 8.212012] sd 9:0:0:0: [sdf] Assuming drive cache: write through [ 8.212015] sdf: sdf1 [ 8.213819] usb 2-4:1.0: uevent [ 8.213923] usb 2-4: uevent [ 8.215031] sd 9:0:0:0: [sdf] Assuming drive cache: write through [ 8.215035] sd 9:0:0:0: [sdf] Attached SCSI removable disk [ 8.215052] usb 2-4:1.0: uevent [ 8.696491] alloc irq_desc for 27 on node 0 [ 8.696494] alloc kstat_irqs on node 0 [ 8.696502] forcedeth 0000:00:0a.0: irq 27 for MSI/MSI-X [ 9.234902] mount.nfs used greatest stack depth: 2768 bytes left [ 10.252043] usb usb3: uevent [ 10.252116] usb 3-0:1.0: uevent [ 10.252158] usb 3-2: uevent [ 10.252222] usb 3-2:1.0: uevent [ 10.252392] usb 3-3: uevent [ 10.252460] usb 3-3:1.0: uevent [ 10.252774] usb 3-5: uevent [ 10.252833] usb 3-5:1.0: uevent [ 10.252871] usb 3-5:1.1: uevent [ 10.252982] usb usb1: uevent [ 10.253046] usb 1-0:1.0: uevent [ 10.253084] usb 1-4: uevent [ 10.253143] usb 1-4:1.0: uevent [ 10.254348] usb usb4: uevent [ 10.254406] usb 4-0:1.0: uevent [ 10.254512] usb usb2: uevent [ 10.254571] usb 2-0:1.0: uevent [ 10.254611] usb 2-4: uevent [ 10.254669] usb 2-4:1.0: uevent [ 10.477607] usb usb4: usb auto-resume [ 10.477612] ohci_hcd 0000:00:04.0: resume root hub [ 10.537139] hub 4-0:1.0: hub_resume [ 10.537424] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 11.704143] ohci_hcd 0000:00:04.0: auto-stop root hub [ 12.701017] hub 4-0:1.0: hub_suspend [ 12.701026] usb usb4: bus auto-suspend [ 12.701029] ohci_hcd 0000:00:04.0: suspend root hub [ 19.413010] eth0: no IPv6 routers present [ 40.325416] usb usb4: usb auto-resume [ 40.325421] ohci_hcd 0000:00:04.0: resume root hub [ 40.385011] hub 4-0:1.0: hub_resume [ 40.385300] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 41.454017] ohci_hcd 0000:00:04.0: auto-stop root hub [ 42.701016] hub 4-0:1.0: hub_suspend [ 42.701022] usb usb4: bus auto-suspend [ 42.701025] ohci_hcd 0000:00:04.0: suspend root hub [ 70.341649] usb usb4: usb auto-resume [ 70.341655] ohci_hcd 0000:00:04.0: resume root hub [ 70.401012] hub 4-0:1.0: hub_resume [ 70.401329] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 71.454018] ohci_hcd 0000:00:04.0: auto-stop root hub [ 72.701021] hub 4-0:1.0: hub_suspend [ 72.701029] usb usb4: bus auto-suspend [ 72.701032] ohci_hcd 0000:00:04.0: suspend root hub [ 100.342171] usb usb4: usb auto-resume [ 100.342176] ohci_hcd 0000:00:04.0: resume root hub [ 100.402014] hub 4-0:1.0: hub_resume [ 100.402265] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 101.454143] ohci_hcd 0000:00:04.0: auto-stop root hub [ 102.701023] hub 4-0:1.0: hub_suspend [ 102.701033] usb usb4: bus auto-suspend [ 102.701036] ohci_hcd 0000:00:04.0: suspend root hub [ 130.341711] usb usb4: usb auto-resume [ 130.341716] ohci_hcd 0000:00:04.0: resume root hub [ 130.401013] hub 4-0:1.0: hub_resume [ 130.401388] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 131.454018] ohci_hcd 0000:00:04.0: auto-stop root hub [ 132.701022] hub 4-0:1.0: hub_suspend [ 132.701031] usb usb4: bus auto-suspend [ 132.701034] ohci_hcd 0000:00:04.0: suspend root hub [ 160.342246] usb usb4: usb auto-resume [ 160.342252] ohci_hcd 0000:00:04.0: resume root hub [ 160.402133] hub 4-0:1.0: hub_resume [ 160.402479] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 161.454141] ohci_hcd 0000:00:04.0: auto-stop root hub [ 162.701024] hub 4-0:1.0: hub_suspend [ 162.701033] usb usb4: bus auto-suspend [ 162.701036] ohci_hcd 0000:00:04.0: suspend root hub [ 190.338837] usb usb4: usb auto-resume [ 190.338843] ohci_hcd 0000:00:04.0: resume root hub [ 190.398012] hub 4-0:1.0: hub_resume [ 190.398310] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 191.454019] ohci_hcd 0000:00:04.0: auto-stop root hub [ 192.701019] hub 4-0:1.0: hub_suspend [ 192.701029] usb usb4: bus auto-suspend [ 192.701032] ohci_hcd 0000:00:04.0: suspend root hub [ 220.333931] usb usb4: usb auto-resume [ 220.333936] ohci_hcd 0000:00:04.0: resume root hub [ 220.393012] hub 4-0:1.0: hub_resume [ 220.393310] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 221.454019] ohci_hcd 0000:00:04.0: auto-stop root hub [ 222.701020] hub 4-0:1.0: hub_suspend [ 222.701028] usb usb4: bus auto-suspend [ 222.701031] ohci_hcd 0000:00:04.0: suspend root hub [ 250.331229] usb usb4: usb auto-resume [ 250.331235] ohci_hcd 0000:00:04.0: resume root hub [ 250.391015] hub 4-0:1.0: hub_resume [ 250.391396] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 251.454019] ohci_hcd 0000:00:04.0: auto-stop root hub [ 252.701154] hub 4-0:1.0: hub_suspend [ 252.701162] usb usb4: bus auto-suspend [ 252.701165] ohci_hcd 0000:00:04.0: suspend root hub [ 280.333861] usb usb4: usb auto-resume [ 280.333866] ohci_hcd 0000:00:04.0: resume root hub [ 280.393015] hub 4-0:1.0: hub_resume [ 280.393374] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 281.454019] ohci_hcd 0000:00:04.0: auto-stop root hub [ 282.701017] hub 4-0:1.0: hub_suspend [ 282.701026] usb usb4: bus auto-suspend [ 282.701029] ohci_hcd 0000:00:04.0: suspend root hub [ 290.410742] saa7146: register extension 'budget dvb'. [ 310.312811] usb usb4: usb auto-resume [ 310.312816] ohci_hcd 0000:00:04.0: resume root hub [ 310.372016] hub 4-0:1.0: hub_resume [ 310.372290] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 311.454019] ohci_hcd 0000:00:04.0: auto-stop root hub [ 312.701023] hub 4-0:1.0: hub_suspend [ 312.701032] usb usb4: bus auto-suspend [ 312.701035] ohci_hcd 0000:00:04.0: suspend root hub [ 340.342219] usb usb4: usb auto-resume [ 340.342225] ohci_hcd 0000:00:04.0: resume root hub [ 340.402018] hub 4-0:1.0: hub_resume [ 340.402396] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 341.454019] ohci_hcd 0000:00:04.0: auto-stop root hub [ 342.701143] hub 4-0:1.0: hub_suspend [ 342.701151] usb usb4: bus auto-suspend [ 342.701154] ohci_hcd 0000:00:04.0: suspend root hub [ 370.341946] usb usb4: usb auto-resume [ 370.341952] ohci_hcd 0000:00:04.0: resume root hub [ 370.401013] hub 4-0:1.0: hub_resume [ 370.401295] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 371.454014] ohci_hcd 0000:00:04.0: auto-stop root hub [ 372.701020] hub 4-0:1.0: hub_suspend [ 372.701029] usb usb4: bus auto-suspend [ 372.701032] ohci_hcd 0000:00:04.0: suspend root hub [ 400.331732] usb usb4: usb auto-resume [ 400.331737] ohci_hcd 0000:00:04.0: resume root hub [ 400.391014] hub 4-0:1.0: hub_resume [ 400.391384] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 401.454014] ohci_hcd 0000:00:04.0: auto-stop root hub [ 402.701147] hub 4-0:1.0: hub_suspend [ 402.701156] usb usb4: bus auto-suspend [ 402.701159] ohci_hcd 0000:00:04.0: suspend root hub [ 430.338092] usb usb4: usb auto-resume [ 430.338097] ohci_hcd 0000:00:04.0: resume root hub [ 430.398013] hub 4-0:1.0: hub_resume [ 430.398370] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 431.454018] ohci_hcd 0000:00:04.0: auto-stop root hub [ 432.701018] hub 4-0:1.0: hub_suspend [ 432.701026] usb usb4: bus auto-suspend [ 432.701029] ohci_hcd 0000:00:04.0: suspend root hub [ 460.335856] usb usb4: usb auto-resume [ 460.335862] ohci_hcd 0000:00:04.0: resume root hub [ 460.395012] hub 4-0:1.0: hub_resume [ 460.395298] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 461.454019] ohci_hcd 0000:00:04.0: auto-stop root hub [ 462.701017] hub 4-0:1.0: hub_suspend [ 462.701024] usb usb4: bus auto-suspend [ 462.701027] ohci_hcd 0000:00:04.0: suspend root hub [ 490.313839] usb usb4: usb auto-resume [ 490.313845] ohci_hcd 0000:00:04.0: resume root hub [ 490.373013] hub 4-0:1.0: hub_resume [ 490.373338] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 491.454012] ohci_hcd 0000:00:04.0: auto-stop root hub [ 492.701018] hub 4-0:1.0: hub_suspend [ 492.701025] usb usb4: bus auto-suspend [ 492.701029] ohci_hcd 0000:00:04.0: suspend root hub [ 520.313809] usb usb4: usb auto-resume [ 520.313814] ohci_hcd 0000:00:04.0: resume root hub [ 520.373139] hub 4-0:1.0: hub_resume [ 520.373393] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 521.454146] ohci_hcd 0000:00:04.0: auto-stop root hub [ 522.701017] hub 4-0:1.0: hub_suspend [ 522.701026] usb usb4: bus auto-suspend [ 522.701029] ohci_hcd 0000:00:04.0: suspend root hub [ 550.341223] usb usb4: usb auto-resume [ 550.341229] ohci_hcd 0000:00:04.0: resume root hub [ 550.401019] hub 4-0:1.0: hub_resume [ 550.401403] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 551.454137] ohci_hcd 0000:00:04.0: auto-stop root hub [ 552.701021] hub 4-0:1.0: hub_suspend [ 552.701028] usb usb4: bus auto-suspend [ 552.701031] ohci_hcd 0000:00:04.0: suspend root hub [ 580.341757] usb usb4: usb auto-resume [ 580.341763] ohci_hcd 0000:00:04.0: resume root hub [ 580.401012] hub 4-0:1.0: hub_resume [ 580.401297] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 581.454018] ohci_hcd 0000:00:04.0: auto-stop root hub [ 582.701149] hub 4-0:1.0: hub_suspend [ 582.701158] usb usb4: bus auto-suspend [ 582.701162] ohci_hcd 0000:00:04.0: suspend root hub [ 610.341202] usb usb4: usb auto-resume [ 610.341208] ohci_hcd 0000:00:04.0: resume root hub [ 610.401013] hub 4-0:1.0: hub_resume [ 610.401382] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 611.454143] ohci_hcd 0000:00:04.0: auto-stop root hub [ 612.701140] hub 4-0:1.0: hub_suspend [ 612.701149] usb usb4: bus auto-suspend [ 612.701152] ohci_hcd 0000:00:04.0: suspend root hub [ 640.341212] usb usb4: usb auto-resume [ 640.341219] ohci_hcd 0000:00:04.0: resume root hub [ 640.401133] hub 4-0:1.0: hub_resume [ 640.401405] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 641.454137] ohci_hcd 0000:00:04.0: auto-stop root hub [ 642.701019] hub 4-0:1.0: hub_suspend [ 642.701027] usb usb4: bus auto-suspend [ 642.701031] ohci_hcd 0000:00:04.0: suspend root hub [ 670.342230] usb usb4: usb auto-resume [ 670.342236] ohci_hcd 0000:00:04.0: resume root hub [ 670.402008] hub 4-0:1.0: hub_resume [ 670.402253] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 671.454017] ohci_hcd 0000:00:04.0: auto-stop root hub [ 672.701016] hub 4-0:1.0: hub_suspend [ 672.701023] usb usb4: bus auto-suspend [ 672.701026] ohci_hcd 0000:00:04.0: suspend root hub [ 700.313749] usb usb4: usb auto-resume [ 700.313755] ohci_hcd 0000:00:04.0: resume root hub [ 700.373013] hub 4-0:1.0: hub_resume [ 700.373330] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 701.454015] ohci_hcd 0000:00:04.0: auto-stop root hub [ 702.701013] hub 4-0:1.0: hub_suspend [ 702.701018] usb usb4: bus auto-suspend [ 702.701021] ohci_hcd 0000:00:04.0: suspend root hub [ 730.342308] usb usb4: usb auto-resume [ 730.342314] ohci_hcd 0000:00:04.0: resume root hub [ 730.402012] hub 4-0:1.0: hub_resume [ 730.402292] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 731.454018] ohci_hcd 0000:00:04.0: auto-stop root hub [ 732.701021] hub 4-0:1.0: hub_suspend [ 732.701029] usb usb4: bus auto-suspend [ 732.701033] ohci_hcd 0000:00:04.0: suspend root hub [ 760.341211] usb usb4: usb auto-resume [ 760.341216] ohci_hcd 0000:00:04.0: resume root hub [ 760.401139] hub 4-0:1.0: hub_resume [ 760.401399] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 761.454145] ohci_hcd 0000:00:04.0: auto-stop root hub [ 762.701016] hub 4-0:1.0: hub_suspend [ 762.701024] usb usb4: bus auto-suspend [ 762.701027] ohci_hcd 0000:00:04.0: suspend root hub [ 790.341164] usb usb4: usb auto-resume [ 790.341169] ohci_hcd 0000:00:04.0: resume root hub [ 790.401012] hub 4-0:1.0: hub_resume [ 790.401265] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 791.454019] ohci_hcd 0000:00:04.0: auto-stop root hub [ 792.701017] hub 4-0:1.0: hub_suspend [ 792.701025] usb usb4: bus auto-suspend [ 792.701028] ohci_hcd 0000:00:04.0: suspend root hub [ 811.394101] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0008 [ 811.394111] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00030300 PESC CSC LSDA PPS [ 811.394117] hub 3-0:1.0: port 3, status 0300, change 0003, 1.5 Mb/s [ 811.394120] usb 3-3: USB disconnect, address 3 [ 811.394121] usb 3-3: unregistering device [ 811.394123] usb 3-3: usb_disable_device nuking all URBs [ 811.394141] ohci_hcd 0000:00:02.0: shutdown urb ffff88006e439b40 ep1in-intr [ 820.341699] usb usb4: usb auto-resume [ 820.341704] ohci_hcd 0000:00:04.0: resume root hub [ 820.401013] hub 4-0:1.0: hub_resume [ 821.454019] ohci_hcd 0000:00:04.0: auto-stop root hub [ 838.314145] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 1 [ 838.314646] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 2 [ 838.315643] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 3 [ 838.316645] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 4 [ 838.317640] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 5 [ 838.318641] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 6 [ 838.319642] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 7 [ 838.320647] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 8 [ 838.321642] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 9 [ 838.322642] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 10 [ 838.323642] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 11 [ 838.324641] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 12 [ 838.325641] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 13 [ 838.326641] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 14 [ 838.327641] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 15 [ 838.328643] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 16 [ 838.329640] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 17 [ 838.330645] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 18 [ 838.331646] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 19 [ 838.332645] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 20 [ 838.333645] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 21 [ 838.334646] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 22 [ 838.335646] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 23 [ 838.336645] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 24 [ 838.337645] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 25 [ 838.338646] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 26 [ 838.339644] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 27 [ 838.340645] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 28 [ 838.341645] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 29 [ 838.342646] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 30 [ 838.343644] ehci_hcd 0000:00:04.1: detected XactErr len 0/31 retry 31 [ 838.344645] ehci_hcd 0000:00:04.1: devpath 4 ep2out 3strikes [ 838.395016] ehci_hcd 0000:00:04.1: GetStatus port 4 status 001002 POWER sig=se0 CSC [ 838.395024] hub 2-0:1.0: logical disconnect on port 4 [ 838.396402] usb 2-4:1.0: uevent [ 838.396497] usb 2-4: uevent [ 838.400434] usb 2-4:1.0: uevent