[ 0.000000] Linux version 4.7.0-040700rc1-lowlatency (kernel@gomeisa) (gcc version 5.3.1 20160528 (Ubuntu 5.3.1-21ubuntu11) ) #201606100619 SMP PREEMPT Fri Jun 10 10:26:39 UTC 2016 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-040700rc1-lowlatency root=UUID=2f9198a4-2d4b-4ef3-96c6-e319f06039b7 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008420bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000008420c000-0x0000000084413fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000084414000-0x000000008464afff] usable [ 0.000000] BIOS-e820: [mem 0x000000008464b000-0x000000008487cfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008487d000-0x0000000084a7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000084a7f000-0x0000000084a9ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000084aa0000-0x0000000084d9ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000084da0000-0x00000000855a9fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000855aa000-0x000000008635afff] usable [ 0.000000] BIOS-e820: [mem 0x000000008635b000-0x000000008635bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000008635c000-0x00000000863a5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000863a6000-0x00000000863fffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000086400000-0x000000008640efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008640f000-0x0000000087f0efff] usable [ 0.000000] BIOS-e820: [mem 0x0000000087f0f000-0x0000000087f3efff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000087f3f000-0x0000000087f4efff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000087f4f000-0x0000000087faefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000087faf000-0x0000000087ffefff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000087fff000-0x0000000087ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000088000000-0x00000000880fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000872ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 3.0 present. [ 0.000000] DMI: Notebook N350DW /N350DW , BIOS 5.11 01/26/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x873000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 1 base 00A0000000 mask 7FE0000000 uncachable [ 0.000000] 2 base 0090000000 mask 7FF0000000 uncachable [ 0.000000] 3 base 008C000000 mask 7FFC000000 uncachable [ 0.000000] 4 base 008A000000 mask 7FFE000000 uncachable [ 0.000000] 5 base 0089000000 mask 7FFF000000 uncachable [ 0.000000] 6 base 0088800000 mask 7FFF800000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0x88000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fccb0-0x000fccbf] mapped at [ffff8800000fccb0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x02196000, 0x02196fff] PGTABLE [ 0.000000] BRK [0x02197000, 0x02197fff] PGTABLE [ 0.000000] BRK [0x02198000, 0x02198fff] PGTABLE [ 0.000000] BRK [0x02199000, 0x02199fff] PGTABLE [ 0.000000] BRK [0x0219a000, 0x0219afff] PGTABLE [ 0.000000] BRK [0x0219b000, 0x0219bfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33662000-0x35b28fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x0000000087F4F088 000094 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x0000000087F69278 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x0000000087F4F1B8 01A0BA (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x0000000087FAEF80 000040 [ 0.000000] ACPI: APIC 0x0000000087F69388 0000BC (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x0000000087F69448 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x0000000087F69490 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x0000000087F69530 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x0000000087F69570 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B) [ 0.000000] ACPI: SSDT 0x0000000087F695A8 00036D (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x0000000087F69918 001100 (v01 INTEL PtidDevc 00001000 INTL 20120913) [ 0.000000] ACPI: DBGP 0x0000000087F6AA18 000034 (v01 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: DBG2 0x0000000087F6AA50 000054 (v00 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x0000000087F6AAA8 001658 (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x0000000087F6C100 000042 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x0000000087F6C148 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: ASF! 0x0000000087F6CFC0 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000872ffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x872fcf000-0x872ff9fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x0000000872ffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000008420bfff] [ 0.000000] node 0: [mem 0x0000000084414000-0x000000008464afff] [ 0.000000] node 0: [mem 0x00000000855aa000-0x000000008635afff] [ 0.000000] node 0: [mem 0x00000000863a6000-0x00000000863fffff] [ 0.000000] node 0: [mem 0x000000008640f000-0x0000000087f0efff] [ 0.000000] node 0: [mem 0x0000000087fff000-0x0000000087ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000872ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000872ffffff] [ 0.000000] On node 0 totalpages: 8363242 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3995 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8566 pages used for memmap [ 0.000000] DMA32 zone: 548175 pages, LIFO batch:31 [ 0.000000] Normal zone: 122048 pages used for memmap [ 0.000000] Normal zone: 7811072 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0x89000000-0x8affffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x8420c000-0x84413fff] [ 0.000000] PM: Registered nosave memory: [mem 0x8464b000-0x8487cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x8487d000-0x84a7efff] [ 0.000000] PM: Registered nosave memory: [mem 0x84a7f000-0x84a9ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x84aa0000-0x84d9ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x84da0000-0x855a9fff] [ 0.000000] PM: Registered nosave memory: [mem 0x8635b000-0x8635bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x8635c000-0x863a5fff] [ 0.000000] PM: Registered nosave memory: [mem 0x86400000-0x8640efff] [ 0.000000] PM: Registered nosave memory: [mem 0x87f0f000-0x87f3efff] [ 0.000000] PM: Registered nosave memory: [mem 0x87f3f000-0x87f4efff] [ 0.000000] PM: Registered nosave memory: [mem 0x87f4f000-0x87faefff] [ 0.000000] PM: Registered nosave memory: [mem 0x87faf000-0x87ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0x88000000-0x880fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x88100000-0x88ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x89000000-0x8affffff] [ 0.000000] PM: Registered nosave memory: [mem 0x8b000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0x8b000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 34 pages/cpu @ffff880872c00000 s98392 r8192 d32680 u262144 [ 0.000000] pcpu-alloc: s98392 r8192 d32680 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8232543 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-040700rc1-lowlatency root=UUID=2f9198a4-2d4b-4ef3-96c6-e319f06039b7 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 32805308K/33452968K available (6914K kernel code, 1417K rwdata, 3132K rodata, 1740K init, 2524K bss, 647660K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:524544 nr_irqs:2048 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Unable to calibrate against PIT [ 0.000000] tsc: using HPET reference calibration [ 0.000000] tsc: Detected 2808.000 MHz processor [ 0.000017] Calibrating delay loop (skipped), value calculated using timer frequency.. 5616.00 BogoMIPS (lpj=2808000) [ 0.000019] pid_max: default: 32768 minimum: 301 [ 0.000036] ACPI: Core revision 20160422 [ 0.000060] Security Framework initialized [ 0.000061] Yama: becoming mindful. [ 0.000066] AppArmor: AppArmor initialized [ 0.001377] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.005713] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.007586] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.007605] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.007844] CPU: Physical Processor ID: 0 [ 0.007845] CPU: Processor Core ID: 0 [ 0.007849] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.007849] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.007852] mce: CPU supports 10 MCE banks [ 0.007859] CPU0: Thermal monitoring enabled (TM1) [ 0.007873] process: using mwait in idle threads [ 0.007875] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.007876] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.008139] Freeing SMP alternatives memory: 24K (ffffffff81f17000 - ffffffff81f1d000) [ 0.010494] ftrace: allocating 27716 entries in 109 pages [ 0.018816] smpboot: Max logical packages: 2 [ 0.018818] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.020045] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.023189] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.033196] TSC deadline timer enabled [ 0.033201] smpboot: CPU0: Intel(R) Core(TM) i7-6700T CPU @ 2.80GHz (family: 0x6, model: 0x5e, stepping: 0x3) [ 0.033204] Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver. [ 0.033223] ... version: 4 [ 0.033224] ... bit width: 48 [ 0.033224] ... generic registers: 4 [ 0.033225] ... value mask: 0000ffffffffffff [ 0.033226] ... max period: 0000ffffffffffff [ 0.033226] ... fixed-purpose events: 3 [ 0.033227] ... event mask: 000000070000000f [ 0.039390] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.044278] x86: Booting SMP configuration: [ 0.044282] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.502837] x86: Booted up 1 node, 8 CPUs [ 0.502840] smpboot: Total of 8 processors activated (44951.67 BogoMIPS) [ 0.510246] devtmpfs: initialized [ 0.510285] x86/mm: Memory block size: 128MB [ 0.513054] evm: security.selinux [ 0.513054] evm: security.SMACK64 [ 0.513055] evm: security.SMACK64EXEC [ 0.513056] evm: security.SMACK64TRANSMUTE [ 0.513056] evm: security.SMACK64MMAP [ 0.513057] evm: security.ima [ 0.513057] evm: security.capability [ 0.513096] PM: Registering ACPI NVS region [mem 0x8420c000-0x84413fff] (2129920 bytes) [ 0.513111] PM: Registering ACPI NVS region [mem 0x8487d000-0x84a7efff] (2105344 bytes) [ 0.513126] PM: Registering ACPI NVS region [mem 0x84aa0000-0x84d9ffff] (3145728 bytes) [ 0.513147] PM: Registering ACPI NVS region [mem 0x8635b000-0x8635bfff] (4096 bytes) [ 0.513147] PM: Registering ACPI NVS region [mem 0x87f4f000-0x87faefff] (393216 bytes) [ 0.513188] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.513219] pinctrl core: initialized pinctrl subsystem [ 0.513357] RTC time: 18:26:37, date: 06/29/16 [ 0.513426] NET: Registered protocol family 16 [ 0.517640] cpuidle: using governor ladder [ 0.523652] cpuidle: using governor menu [ 0.523655] PCCT header not found. [ 0.523732] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.523733] ACPI: bus type PCI registered [ 0.523734] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.523784] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.523786] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.523798] PCI: Using configuration type 1 for base access [ 0.528786] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.528787] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.528952] ACPI: Added _OSI(Module Device) [ 0.528953] ACPI: Added _OSI(Processor Device) [ 0.528954] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.528955] ACPI: Added _OSI(Processor Aggregator Device) [ 0.534724] ACPI Error: [_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20160422/dswload-210) [ 0.534727] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160422/psobject-227) [ 0.534901] ACPI Exception: AE_NOT_FOUND, [DSDT] table load failed (20160422/tbxfload-197) [ 0.534908] ACPI Error: [\_SB_.PCI0.SAT0] Namespace lookup failure, AE_NOT_FOUND (20160422/dswload-210) [ 0.534910] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160422/psobject-227) [ 0.534912] ACPI Exception: AE_NOT_FOUND, (SSDT:SataTabl) while loading table (20160422/tbxfload-227) [ 0.534990] ACPI Error: [ECR1] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359) [ 0.534992] ACPI Error: Method parse/execution failed [\] (Node ffffffff82174f40), AE_NOT_FOUND (20160422/psparse-542) [ 0.534997] ACPI Error: [PCHV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359) [ 0.534998] ACPI Error: Method parse/execution failed [\] (Node ffffffff82174f40), AE_NOT_FOUND (20160422/psparse-542) [ 0.535002] ACPI Error: [SMD0] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359) [ 0.535003] ACPI Error: Method parse/execution failed [\] (Node ffffffff82174f40), AE_NOT_FOUND (20160422/psparse-542) [ 0.535007] ACPI Error: [SMD1] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359) [ 0.535008] ACPI Error: Method parse/execution failed [\] (Node ffffffff82174f40), AE_NOT_FOUND (20160422/psparse-542) [ 0.535012] ACPI Error: [SMD2] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359) [ 0.535013] ACPI Error: Method parse/execution failed [\] (Node ffffffff82174f40), AE_NOT_FOUND (20160422/psparse-542) [ 0.535016] ACPI Error: [SMD3] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359) [ 0.535018] ACPI Error: Method parse/execution failed [\] (Node ffffffff82174f40), AE_NOT_FOUND (20160422/psparse-542) [ 0.535021] ACPI Error: [SMD4] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359) [ 0.535023] ACPI Error: Method parse/execution failed [\] (Node ffffffff82174f40), AE_NOT_FOUND (20160422/psparse-542) [ 0.535026] ACPI Error: [SMD5] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359) [ 0.535027] ACPI Error: Method parse/execution failed [\] (Node ffffffff82174f40), AE_NOT_FOUND (20160422/psparse-542) [ 0.535031] ACPI Error: [SMD6] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359) [ 0.535032] ACPI Error: Method parse/execution failed [\] (Node ffffffff82174f40), AE_NOT_FOUND (20160422/psparse-542) [ 0.535035] ACPI Error: [SMD7] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359) [ 0.535037] ACPI Error: Method parse/execution failed [\] (Node ffffffff82174f40), AE_NOT_FOUND (20160422/psparse-542) [ 0.535040] ACPI Error: [SMD8] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359) [ 0.535042] ACPI Error: Method parse/execution failed [\] (Node ffffffff82174f40), AE_NOT_FOUND (20160422/psparse-542) [ 0.535045] ACPI Error: [SMD9] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359) [ 0.535046] ACPI Error: Method parse/execution failed [\] (Node ffffffff82174f40), AE_NOT_FOUND (20160422/psparse-542) [ 0.535049] ACPI Error: [SMDA] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359) [ 0.535051] ACPI Error: Method parse/execution failed [\] (Node ffffffff82174f40), AE_NOT_FOUND (20160422/psparse-542) [ 0.535054] ACPI Error: [USTP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359) [ 0.535056] ACPI Error: Method parse/execution failed [\] (Node ffffffff82174f40), AE_NOT_FOUND (20160422/psparse-542) [ 0.535059] ACPI Error: [S0ID] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359) [ 0.535060] ACPI Error: Method parse/execution failed [\] (Node ffffffff82174f40), AE_NOT_FOUND (20160422/psparse-542) [ 0.535083] ACPI: Executed 20 blocks of module-level executable AML code [ 0.535130] ACPI Error: [\_SB_.PCI0.PEG0] Namespace lookup failure, AE_NOT_FOUND (20160422/dswload-210) [ 0.535132] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160422/psobject-227) [ 0.535138] ACPI Exception: AE_NOT_FOUND, (SSDT: SaSsdt ) while loading table (20160422/tbxfload-227) [ 0.535168] ACPI Error: [\_PR_.CPU0] Namespace lookup failure, AE_NOT_FOUND (20160422/dswload-210) [ 0.535170] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160422/psobject-227) [ 0.535173] ACPI Exception: AE_NOT_FOUND, (SSDT: CpuSsdt) while loading table (20160422/tbxfload-227) [ 0.535175] ACPI Error: 4 table load failures, 1 successful (20160422/tbxfload-247) [ 0.535592] ACPI: Interpreter enabled [ 0.535597] ACPI: (supports S0) [ 0.535598] ACPI: Using IOAPIC for interrupt routing [ 0.535604] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.535769] vgaarb: loaded [ 0.535892] PCI: Using ACPI for IRQ routing [ 0.535893] PCI: Discovered peer bus 00 [ 0.535894] PCI: root bus 00: using default resources [ 0.535895] PCI: Probing PCI hardware (bus 00) [ 0.535912] ACPI: \: failed to evaluate _DSM (0x1001) [ 0.535913] PCI host bridge to bus 0000:00 [ 0.535915] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.535916] pci_bus 0000:00: root bus resource [mem 0x00000000-0x7fffffffff] [ 0.535917] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.535923] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000 [ 0.535968] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000 [ 0.535975] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit] [ 0.535979] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.535982] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.536016] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.536017] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.536079] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 [ 0.536094] pci 0000:00:14.0: reg 0x10: [mem 0xdfc30000-0xdfc3ffff 64bit] [ 0.536147] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.536178] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000 [ 0.536192] pci 0000:00:14.2: reg 0x10: [mem 0xdfc4e000-0xdfc4efff 64bit] [ 0.536284] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000 [ 0.536300] pci 0000:00:16.0: reg 0x10: [mem 0xdfc4d000-0xdfc4dfff 64bit] [ 0.536356] pci 0000:00:16.0: PME# supported from D3hot [ 0.536407] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601 [ 0.536419] pci 0000:00:17.0: reg 0x10: [mem 0xdfc48000-0xdfc49fff] [ 0.536424] pci 0000:00:17.0: reg 0x14: [mem 0xdfc4c000-0xdfc4c0ff] [ 0.536431] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] [ 0.536436] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] [ 0.536442] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] [ 0.536448] pci 0000:00:17.0: reg 0x24: [mem 0xdfc4b000-0xdfc4b7ff] [ 0.536478] pci 0000:00:17.0: PME# supported from D3hot [ 0.536516] pci 0000:00:1c.0: [8086:a112] type 01 class 0x060400 [ 0.536562] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.536601] pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400 [ 0.536646] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.536685] pci 0000:00:1c.5: [8086:a115] type 01 class 0x060400 [ 0.536735] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.536780] pci 0000:00:1f.0: [8086:a144] type 00 class 0x060100 [ 0.536894] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 [ 0.536904] pci 0000:00:1f.2: reg 0x10: [mem 0xdfc44000-0xdfc47fff] [ 0.536975] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300 [ 0.536994] pci 0000:00:1f.3: reg 0x10: [mem 0xdfc40000-0xdfc43fff 64bit] [ 0.537023] pci 0000:00:1f.3: reg 0x20: [mem 0xdfc20000-0xdfc2ffff 64bit] [ 0.537063] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.537100] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 [ 0.537146] pci 0000:00:1f.4: reg 0x10: [mem 0xdfc4a000-0xdfc4a0ff 64bit] [ 0.537215] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] [ 0.537317] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000 [ 0.537336] pci 0000:00:1f.6: reg 0x10: [mem 0xdfc00000-0xdfc1ffff] [ 0.537433] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.537508] pci 0000:01:00.0: [8086:24f3] type 00 class 0x028000 [ 0.537541] pci 0000:01:00.0: reg 0x10: [mem 0xdfb00000-0xdfb01fff 64bit] [ 0.537706] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.539710] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.539730] pci 0000:00:1c.0: bridge window [mem 0xdfb00000-0xdfbfffff] [ 0.539782] pci 0000:02:00.0: [10ec:5229] type 00 class 0xff0000 [ 0.539804] pci 0000:02:00.0: reg 0x10: [mem 0xdfa00000-0xdfa00fff] [ 0.539922] pci 0000:02:00.0: supports D1 D2 [ 0.539923] pci 0000:02:00.0: PME# supported from D1 D2 D3hot [ 0.541742] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.541746] pci 0000:00:1c.3: bridge window [mem 0xdfa00000-0xdfafffff] [ 0.541777] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 0.541779] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 0.541782] pci 0000:00:1c.5: bridge window [mem 0xdf000000-0xdf9fffff] [ 0.541785] pci 0000:00:1c.5: bridge window [mem 0xd0000000-0xd09fffff 64bit pref] [ 0.541798] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 03 [ 0.569929] PCI: pci_cache_line_size set to 64 bytes [ 0.569977] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff] [ 0.569978] e820: reserve RAM buffer [mem 0x8420c000-0x87ffffff] [ 0.569979] e820: reserve RAM buffer [mem 0x8464b000-0x87ffffff] [ 0.569980] e820: reserve RAM buffer [mem 0x8635b000-0x87ffffff] [ 0.569981] e820: reserve RAM buffer [mem 0x86400000-0x87ffffff] [ 0.569982] e820: reserve RAM buffer [mem 0x87f0f000-0x87ffffff] [ 0.569983] e820: reserve RAM buffer [mem 0x873000000-0x873ffffff] [ 0.570037] NetLabel: Initializing [ 0.570037] NetLabel: domain hash size = 128 [ 0.570038] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.570045] NetLabel: unlabeled traffic allowed by default [ 0.570149] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.570152] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.572206] clocksource: Switched to clocksource hpet [ 0.576360] VFS: Disk quotas dquot_6.6.0 [ 0.576385] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.576446] AppArmor: AppArmor Filesystem Enabled [ 0.576478] pnp: PnP ACPI init [ 0.576489] pnp: PnP ACPI: found 0 devices [ 0.585051] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.585068] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.585071] pci 0000:00:1c.0: bridge window [mem 0xdfb00000-0xdfbfffff] [ 0.585075] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.585078] pci 0000:00:1c.3: bridge window [mem 0xdfa00000-0xdfafffff] [ 0.585082] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 0.585084] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 0.585086] pci 0000:00:1c.5: bridge window [mem 0xdf000000-0xdf9fffff] [ 0.585089] pci 0000:00:1c.5: bridge window [mem 0xd0000000-0xd09fffff 64bit pref] [ 0.585093] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.585094] pci_bus 0000:00: resource 5 [mem 0x00000000-0x7fffffffff] [ 0.585095] pci_bus 0000:01: resource 1 [mem 0xdfb00000-0xdfbfffff] [ 0.585096] pci_bus 0000:02: resource 1 [mem 0xdfa00000-0xdfafffff] [ 0.585097] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.585098] pci_bus 0000:03: resource 1 [mem 0xdf000000-0xdf9fffff] [ 0.585098] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd09fffff 64bit pref] [ 0.585113] NET: Registered protocol family 2 [ 0.585307] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.585543] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.585642] TCP: Hash tables configured (established 262144 bind 65536) [ 0.585667] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.585736] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.585804] NET: Registered protocol family 1 [ 0.585812] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.585816] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.585817] pci 0000:00:14.0: PCI INT A: no GSI [ 0.585861] PCI: CLS 0 bytes, default 64 [ 0.585884] Unpacking initramfs... [ 1.001456] Freeing initrd memory: 37660K (ffff880033662000 - ffff880035b29000) [ 1.001460] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.001462] software IO TLB [mem 0x8020c000-0x8420c000] (64MB) mapped at [ffff88008020c000-ffff88008420bfff] [ 1.001494] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 1.001495] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 1.001495] RAPL PMU: hw unit of domain package 2^-14 Joules [ 1.001496] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 1.001496] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 1.001497] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 1.001567] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.001589] Scanning for low memory corruption every 60 seconds [ 1.001780] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.001799] audit: initializing netlink subsys (disabled) [ 1.001809] audit: type=2000 audit(1467224797.986:1): initialized [ 1.002069] Initialise system trusted keyrings [ 1.002508] workingset: timestamp_bits=33 max_order=23 bucket_order=0 [ 1.003519] zbud: loaded [ 1.003643] Key type big_key registered [ 1.004845] Key type asymmetric registered [ 1.004847] Asymmetric key parser 'x509' registered [ 1.004898] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.005004] io scheduler noop registered [ 1.005005] io scheduler deadline registered (default) [ 1.005038] io scheduler cfq registered [ 1.005105] pcieport 0000:00:1c.0: can't derive routing for PCI INT C [ 1.005106] pcieport 0000:00:1c.0: PCI INT C: no GSI [ 1.005170] pcieport 0000:00:1c.3: can't derive routing for PCI INT D [ 1.005170] pcieport 0000:00:1c.3: PCI INT D: no GSI [ 1.005426] pcieport 0000:00:1c.5: can't derive routing for PCI INT B [ 1.005427] pcieport 0000:00:1c.5: PCI INT B: no GSI [ 1.005514] aer 0000:00:1c.0:pcie002: service driver aer loaded [ 1.005531] aer 0000:00:1c.3:pcie002: service driver aer loaded [ 1.005550] aer 0000:00:1c.5:pcie002: service driver aer loaded [ 1.005557] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 1.005558] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.005560] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded [ 1.005565] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 1.005566] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.005568] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded [ 1.005573] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 1.005575] pcie_pme 0000:00:1c.5:pcie001: service driver pcie_pme loaded [ 1.005577] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.005584] pciehp 0000:00:1c.5:pcie004: Slot #9 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 1.005665] pciehp 0000:00:1c.5:pcie004: service driver pciehp loaded [ 1.005668] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.005683] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 1.005683] vesafb: scrolling: redraw [ 1.005684] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.005691] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90003800000, using 8128k, total 8128k [ 1.141659] Console: switching to colour frame buffer device 240x67 [ 1.275210] fb0: VESA VGA frame buffer device [ 1.275217] intel_idle: MWAIT substates: 0x142120 [ 1.275218] intel_idle: v0.4.1 model 0x5E [ 1.275440] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.275449] GHES: HEST is not enabled! [ 1.275513] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.296460] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A [ 1.298848] PPP generic driver version 2.4.2 [ 1.298885] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.305516] i8042: Detected active multiplexing controller, rev 1.1 [ 1.307863] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.307868] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.307869] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.307870] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.307871] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.308052] mousedev: PS/2 mouse device common for all mice [ 1.308151] rtc_cmos rtc_cmos: RTC can wake from S4 [ 1.308450] rtc rtc0: invalid alarm value: 2016-6-29 18:26:65 [ 1.308516] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 1.308596] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.308611] intel_pstate: Intel P-state driver initializing [ 1.309000] intel_pstate: HWP enabled [ 1.309003] ledtrig-cpu: registered to indicate activity on CPUs [ 1.309175] NET: Registered protocol family 10 [ 1.309467] NET: Registered protocol family 17 [ 1.309801] microcode: CPU0 sig=0x506e3, pf=0x2, revision=0x76 [ 1.309838] microcode: CPU1 sig=0x506e3, pf=0x2, revision=0x76 [ 1.309876] microcode: CPU2 sig=0x506e3, pf=0x2, revision=0x76 [ 1.309931] microcode: CPU3 sig=0x506e3, pf=0x2, revision=0x76 [ 1.309941] microcode: CPU4 sig=0x506e3, pf=0x2, revision=0x76 [ 1.309977] microcode: CPU5 sig=0x506e3, pf=0x2, revision=0x76 [ 1.310034] microcode: CPU6 sig=0x506e3, pf=0x2, revision=0x76 [ 1.310087] microcode: CPU7 sig=0x506e3, pf=0x2, revision=0x76 [ 1.310188] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.310542] registered taskstats version 1 [ 1.310545] Loading compiled-in X.509 certificates [ 1.312396] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.313512] Loaded X.509 cert 'Build time autogenerated kernel key: 1035caaa206b719afc89c644721936fe33c32e09' [ 1.313524] zswap: loaded using pool lzo/zbud [ 1.319152] Key type encrypted registered [ 1.319169] AppArmor: AppArmor sha1 policy hashing enabled [ 1.319170] ima: No TPM chip found, activating TPM-bypass! [ 1.319181] evm: HMAC attrs: 0x1 [ 1.319712] Magic number: 4:464:444 [ 1.319755] pcieport 0000:00:1c.5: hash matches [ 1.320046] rtc_cmos rtc_cmos: setting system clock to 2016-06-29 18:26:38 UTC (1467224798) [ 1.320355] PM: Hibernation image not present or could not be loaded. [ 1.321571] Freeing unused kernel memory: 1740K (ffffffff81d64000 - ffffffff81f17000) [ 1.321572] Write protecting the kernel read-only data: 12288k [ 1.322146] Freeing unused kernel memory: 1264K (ffff8800016c4000 - ffff880001800000) [ 1.323730] Freeing unused kernel memory: 964K (ffff880001b0f000 - ffff880001c00000) [ 1.335127] random: systemd-udevd urandom read with 11 bits of entropy available [ 1.349112] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.349168] ACPI: Power Button [PWRF] [ 1.349970] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 1.351399] Linux agpgart interface v0.103 [ 1.353725] SCSI subsystem initialized [ 1.354460] pps_core: LinuxPPS API ver. 1 registered [ 1.354462] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.354484] pcieport 0000:00:1c.3: can't derive routing for PCI INT A [ 1.354487] rtsx_pci 0000:02:00.0: PCI INT A: no GSI [ 1.354570] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 123 [ 1.355474] PTP clock support registered [ 1.356402] ACPI: bus type USB registered [ 1.356418] usbcore: registered new interface driver usbfs [ 1.356427] usbcore: registered new interface driver hub [ 1.356452] usbcore: registered new device driver usb [ 1.357307] libata version 3.00 loaded. [ 1.359123] [drm] Initialized drm 1.1.0 20060810 [ 1.359882] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.359883] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.359897] e1000e 0000:00:1f.6: can't derive routing for PCI INT A [ 1.359898] e1000e 0000:00:1f.6: PCI INT A: no GSI [ 1.360039] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.571948] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 1.651248] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 80:fa:5b:2c:73:a0 [ 1.651252] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 1.651389] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 1.651487] ahci 0000:00:17.0: version 3.0 [ 1.651502] ahci 0000:00:17.0: can't derive routing for PCI INT A [ 1.651504] ahci 0000:00:17.0: PCI INT A: no GSI [ 1.651561] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled [ 1.651604] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0x33 impl SATA mode [ 1.651605] ahci 0000:00:17.0: flags: 64bit ncq sntf stag led clo only pio slum part ems deso sadm sds apst [ 1.652615] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 1.658183] scsi host0: ahci [ 1.658546] scsi host1: ahci [ 1.658964] scsi host2: ahci [ 1.659516] scsi host3: ahci [ 1.659841] scsi host4: ahci [ 1.660130] scsi host5: ahci [ 1.660165] ata1: SATA max UDMA/133 abar m2048@0xdfc4b000 port 0xdfc4b100 irq 125 [ 1.660180] ata2: SATA max UDMA/133 abar m2048@0xdfc4b000 port 0xdfc4b180 irq 125 [ 1.660181] ata3: DUMMY [ 1.660182] ata4: DUMMY [ 1.660183] ata5: SATA max UDMA/133 abar m2048@0xdfc4b000 port 0xdfc4b300 irq 125 [ 1.660184] ata6: SATA max UDMA/133 abar m2048@0xdfc4b000 port 0xdfc4b380 irq 125 [ 1.660323] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 1.660324] xhci_hcd 0000:00:14.0: PCI INT A: no GSI [ 1.660398] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.660409] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.661569] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 1.661572] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.661811] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.661813] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.661814] usb usb1: Product: xHCI Host Controller [ 1.661815] usb usb1: Manufacturer: Linux 4.7.0-040700rc1-lowlatency xhci-hcd [ 1.661815] usb usb1: SerialNumber: 0000:00:14.0 [ 1.661974] hub 1-0:1.0: USB hub found [ 1.662078] hub 1-0:1.0: 16 ports detected [ 1.663035] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.663037] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.663374] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.663376] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.663377] usb usb2: Product: xHCI Host Controller [ 1.663378] usb usb2: Manufacturer: Linux 4.7.0-040700rc1-lowlatency xhci-hcd [ 1.663379] usb usb2: SerialNumber: 0000:00:14.0 [ 1.663616] hub 2-0:1.0: USB hub found [ 1.663664] hub 2-0:1.0: 8 ports detected [ 1.664025] ACPI: \: failed to evaluate _DSM (0x1001) [ 1.664152] i915 0000:00:02.0: can't derive routing for PCI INT A [ 1.664153] i915 0000:00:02.0: PCI INT A: no GSI [ 1.665271] [drm] Memory usable by graphics device = 4096M [ 1.665273] checking generic (c0000000 7f0000) vs hw (c0000000 10000000) [ 1.665273] fb: switching to inteldrmfb from VESA VGA [ 1.665287] Console: switching to colour dummy device 80x25 [ 1.665428] [drm] Replacing VGA console driver [ 1.719145] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.719146] [drm] Driver supports precise vblank timestamp query. [ 1.723970] [drm] Finished loading i915/skl_dmc_ver1.bin (v1.26) [ 1.727304] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.769964] [drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0 [ 1.961455] fbcon: inteldrmfb (fb0) is primary device [ 1.989101] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.989355] ata1.00: ATA-9: KingFast, N1114B, max UDMA/133 [ 1.989356] ata1.00: 468862128 sectors, multi 2: LBA48 NCQ (depth 31/32), AA [ 1.989999] ata1.00: configured for UDMA/133 [ 1.990609] scsi 0:0:0:0: Direct-Access ATA KingFast 4B PQ: 0 ANSI: 5 [ 2.002334] tsc: Refined TSC clocksource calibration: 2807.982 MHz [ 2.002335] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879b523f9b, max_idle_ns: 440795246933 ns [ 2.015345] usb 1-3: new high-speed USB device number 2 using xhci_hcd [ 2.190620] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610 [ 2.190620] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.190621] usb 1-3: Product: USB2.0 Hub [ 2.190621] usb 1-3: Manufacturer: GenesysLogic [ 2.191879] hub 1-3:1.0: USB hub found [ 2.193322] hub 1-3:1.0: 4 ports detected [ 2.285321] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd [ 2.297253] usb 2-1: New USB device found, idVendor=0781, idProduct=5583 [ 2.297254] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.297254] usb 2-1: Product: Ultra Fit [ 2.297255] usb 2-1: Manufacturer: SanDisk [ 2.297255] usb 2-1: SerialNumber: 4C531001341226108055 [ 2.319030] ata2: SATA link down (SStatus 0 SControl 300) [ 2.356308] usb-storage 2-1:1.0: USB Mass Storage device detected [ 2.356901] scsi host6: usb-storage 2-1:1.0 [ 2.356958] usbcore: registered new interface driver usb-storage [ 2.358751] usbcore: registered new interface driver uas [ 2.449306] usb 1-6: new full-speed USB device number 3 using xhci_hcd [ 2.623710] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.624194] usb 1-6: New USB device found, idVendor=058f, idProduct=9540 [ 2.624195] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.624196] usb 1-6: Product: EMV Smartcard Reader [ 2.624196] usb 1-6: Manufacturer: Generic [ 2.624514] ata5.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133 [ 2.624514] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.624525] psmouse serio2: synaptics: queried max coordinates: x [..5674], y [..4758] [ 2.625244] ata5.00: configured for UDMA/133 [ 2.626632] scsi 4:0:0:0: Direct-Access ATA WDC WD10JPVX-22J 1A01 PQ: 0 ANSI: 5 [ 2.717767] usb 2-3: new SuperSpeed USB device number 3 using xhci_hcd [ 2.733332] usb 2-3: New USB device found, idVendor=05e3, idProduct=0616 [ 2.733333] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.733334] usb 2-3: Product: USB3.0 Hub [ 2.733334] usb 2-3: Manufacturer: GenesysLogic [ 2.735887] hub 2-3:1.0: USB hub found [ 2.736358] hub 2-3:1.0: 4 ports detected [ 2.741867] psmouse serio2: synaptics: queried min coordinates: x [1268..], y [1096..] [ 2.884324] usb 1-9: new full-speed USB device number 4 using xhci_hcd [ 2.890778] psmouse serio2: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x26800/0x0, board id: 3189, fw id: 1944273 [ 2.931070] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7 [ 3.002884] clocksource: Switched to clocksource tsc [ 3.035545] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.049111] ------------[ cut here ]------------ [ 3.049134] WARNING: CPU: 0 PID: 170 at /home/kernel/COD/linux/drivers/gpu/drm/i915/intel_pm.c:3647 skl_update_other_pipe_wm+0x16c/0x180 [i915] [ 3.049135] WARN_ON(!wm_changed) [ 3.049142] Modules linked in: uas usb_storage rtsx_pci_sdmmc i915 video i2c_algo_bit crc32c_intel drm_kms_helper syscopyarea xhci_pci sysfillrect sysimgblt fb_sys_fops xhci_hcd ahci e1000e libahci drm psmouse libata usbcore ptp pps_core rtsx_pci scsi_mod intel_gtt usb_common agpgart fjes button [ 3.049144] CPU: 0 PID: 170 Comm: kworker/u16:7 Not tainted 4.7.0-040700rc1-lowlatency #201606100619 [ 3.049144] Hardware name: Notebook N350DW /N350DW , BIOS 5.11 01/26/2016 [ 3.049147] Workqueue: events_unbound async_run_entry_fn [ 3.049148] 0000000000000286 000000001a0d6195 ffff880846ea3680 ffffffff81369d61 [ 3.049149] ffff880846ea36d0 0000000000000000 ffff880846ea36c0 ffffffff8108145b [ 3.049150] 00000e3f00000000 ffff880847890000 ffff880846eda2f0 ffff880847891000 [ 3.049150] Call Trace: [ 3.049153] [] dump_stack+0x63/0x82 [ 3.049154] [] __warn+0xcb/0xf0 [ 3.049155] [] warn_slowpath_fmt+0x5f/0x80 [ 3.049168] [] skl_update_other_pipe_wm+0x16c/0x180 [i915] [ 3.049180] [] skl_update_wm+0x185/0x610 [i915] [ 3.049199] [] ? intel_ddi_enable_transcoder_func+0x17f/0x260 [i915] [ 3.049216] [] intel_update_watermarks+0x1e/0x30 [i915] [ 3.049233] [] haswell_crtc_enable+0x761/0x8e0 [i915] [ 3.049250] [] ? intel_finish_crtc_commit+0xe/0x10 [i915] [ 3.049254] [] ? drm_atomic_helper_commit_planes_on_crtc+0x154/0x270 [drm_kms_helper] [ 3.049270] [] intel_atomic_commit+0x5da/0x14a0 [i915] [ 3.049280] [] ? drm_atomic_check_only+0x188/0x610 [drm] [ 3.049287] [] drm_atomic_commit+0x37/0x60 [drm] [ 3.049291] [] restore_fbdev_mode+0x22f/0x260 [drm_kms_helper] [ 3.049298] [] ? drm_modeset_lock_all_ctx+0x9a/0xb0 [drm] [ 3.049302] [] drm_fb_helper_restore_fbdev_mode_unlocked+0x33/0x80 [drm_kms_helper] [ 3.049304] [] drm_fb_helper_set_par+0x2d/0x50 [drm_kms_helper] [ 3.049325] [] intel_fbdev_set_par+0x1a/0x60 [i915] [ 3.049327] [] fbcon_init+0x570/0x5f0 [ 3.049329] [] visual_init+0xca/0x130 [ 3.049330] [] do_bind_con_driver+0x1c1/0x3a0 [ 3.049331] [] do_take_over_console+0x116/0x180 [ 3.049332] [] do_fbcon_takeover+0x57/0xb0 [ 3.049334] [] fbcon_event_notify+0x658/0x750 [ 3.049335] [] notifier_call_chain+0x4a/0x70 [ 3.049335] [] __blocking_notifier_call_chain+0x47/0x60 [ 3.049336] [] blocking_notifier_call_chain+0x16/0x20 [ 3.049337] [] fb_notifier_call_chain+0x1b/0x20 [ 3.049338] [] register_framebuffer+0x213/0x370 [ 3.049341] [] drm_fb_helper_initial_config+0x28a/0x420 [drm_kms_helper] [ 3.049357] [] intel_fbdev_initial_config+0x1f/0x30 [i915] [ 3.049358] [] async_run_entry_fn+0x48/0x150 [ 3.049359] [] process_one_work+0x162/0x4b0 [ 3.049360] [] worker_thread+0x48/0x4e0 [ 3.049361] [] ? process_one_work+0x4b0/0x4b0 [ 3.049362] [] ? process_one_work+0x4b0/0x4b0 [ 3.049363] [] kthread+0xd8/0xf0 [ 3.049364] [] ret_from_fork+0x1f/0x40 [ 3.049366] [] ? kthread_worker_fn+0x180/0x180 [ 3.049369] ---[ end trace d74d0ef8cb13bb43 ]--- [ 3.050341] usb 1-9: New USB device found, idVendor=8087, idProduct=0a2b [ 3.050342] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.203405] usb 1-10: new full-speed USB device number 5 using xhci_hcd [ 3.257540] Console: switching to colour frame buffer device 240x67 [ 3.260100] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.359590] scsi 6:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 [ 3.361753] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 3.361778] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 3.361780] sd 0:0:0:0: [sda] Write Protect is off [ 3.361781] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ 3.361782] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.361789] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.361811] sd 4:0:0:0: [sdb] Write Protect is off [ 3.361813] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.361822] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.362084] sda: sda1 sda2 < sda5 > [ 3.362113] sd 6:0:0:0: [sdc] 121307136 512-byte logical blocks: (62.1 GB/57.8 GiB) [ 3.362217] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.363171] sd 6:0:0:0: [sdc] Write Protect is off [ 3.363173] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 3.363429] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.369467] usb 1-10: New USB device found, idVendor=046d, idProduct=c52b [ 3.369468] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.369469] usb 1-10: Product: USB Receiver [ 3.369470] usb 1-10: Manufacturer: Logitech [ 3.372904] hidraw: raw HID events driver (C) Jiri Kosina [ 3.377725] usbcore: registered new interface driver usbhid [ 3.377726] usbhid: USB HID core driver [ 3.378118] sdc: sdc1 sdc2 [ 3.379042] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 3.379393] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-10/input2 [ 3.399663] ata6.00: ATA-8: TOSHIBA MQ02ABD100H, HEF01A, max UDMA/100 [ 3.399666] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.403092] ata6.00: configured for UDMA/100 [ 3.403419] scsi 5:0:0:0: Direct-Access ATA TOSHIBA MQ02ABD1 1A PQ: 0 ANSI: 5 [ 3.414511] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 3.414513] sd 5:0:0:0: [sdd] 4096-byte physical blocks [ 3.414895] sd 5:0:0:0: [sdd] Write Protect is off [ 3.414911] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.414978] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.417361] sd 5:0:0:0: [sdd] Attached SCSI disk [ 3.490692] logitech-hidpp-device 0003:046D:402D.0004: hidraw1: USB HID v1.11 Keyboard [Logitech M560] on usb-0000:00:14.0-10:1 [ 3.504702] input: Logitech M305 as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C52B.0003/0003:046D:101F.0005/input/input10 [ 3.505080] logitech-hidpp-device 0003:046D:101F.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech M305] on usb-0000:00:14.0-10:2 [ 3.523320] usb 1-11: new high-speed USB device number 6 using xhci_hcd [ 3.718626] [drm] RC6 on [ 3.729120] usb 1-11: New USB device found, idVendor=04f2, idProduct=b551 [ 3.729122] usb 1-11: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 3.729123] usb 1-11: Product: Chicony USB 2.0 Camera [ 3.729124] usb 1-11: Manufacturer: Generic [ 3.729125] usb 1-11: SerialNumber: 200901010001 [ 3.749373] sdb: sdb1 [ 3.749746] sd 4:0:0:0: [sdb] Attached SCSI disk [ 3.756207] random: nonblocking pool is initialized [ 3.884195] usb 1-12: new full-speed USB device number 7 using xhci_hcd [ 4.020096] device-mapper: uevent: version 1.0.3 [ 4.020141] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 4.050489] usb 1-12: New USB device found, idVendor=1c7a, idProduct=0603 [ 4.050491] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.050492] usb 1-12: Product: EgisTec_ES603 [ 4.050493] usb 1-12: Manufacturer: EgisTec [ 4.204319] usb 1-14: new high-speed USB device number 8 using xhci_hcd [ 4.367188] raid6: sse2x1 gen() 10039 MB/s [ 4.369590] usb 1-14: New USB device found, idVendor=05e3, idProduct=0610 [ 4.369592] usb 1-14: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.369593] usb 1-14: Product: USB2.0 Hub [ 4.370421] hub 1-14:1.0: USB hub found [ 4.370739] hub 1-14:1.0: 4 ports detected [ 4.384185] raid6: sse2x1 xor() 6324 MB/s [ 4.401184] raid6: sse2x2 gen() 12656 MB/s [ 4.418186] raid6: sse2x2 xor() 8777 MB/s [ 4.435185] raid6: sse2x4 gen() 13921 MB/s [ 4.452186] raid6: sse2x4 xor() 9708 MB/s [ 4.469184] raid6: avx2x1 gen() 25132 MB/s [ 4.486185] raid6: avx2x2 gen() 28960 MB/s [ 4.503183] raid6: avx2x4 gen() 29765 MB/s [ 4.503184] raid6: using algorithm avx2x4 gen() 29765 MB/s [ 4.503185] raid6: using avx2x2 recovery algorithm [ 4.503917] xor: automatically using best checksumming function: [ 4.513183] avx : 28236.000 MB/sec [ 4.521419] Btrfs loaded [ 4.735850] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.815410] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 4.815530] systemd[1]: Detected architecture x86-64. [ 4.815668] systemd[1]: Set hostname to . [ 4.878680] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.878695] systemd[1]: Reached target Remote File Systems (Pre). [ 4.878717] systemd[1]: Listening on udev Kernel Socket. [ 4.878732] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 4.878745] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.878759] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.878764] systemd[1]: Reached target Encrypted Volumes. [ 4.878776] systemd[1]: Listening on udev Control Socket. [ 4.878822] systemd[1]: Created slice User and Session Slice. [ 4.878858] systemd[1]: Listening on Journal Audit Socket. [ 4.878863] systemd[1]: Reached target User and Group Name Lookups. [ 4.878873] systemd[1]: Listening on Syslog Socket. [ 4.878887] systemd[1]: Listening on Journal Socket. [ 4.878904] systemd[1]: Listening on LVM2 poll daemon socket. [ 4.878940] systemd[1]: Created slice System Slice. [ 4.884360] systemd[1]: Mounting Huge Pages File System... [ 4.884617] systemd[1]: Started Read required files in advance. [ 4.885113] systemd[1]: Starting Journal Service... [ 4.885426] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 4.885434] systemd[1]: Reached target Slices. [ 4.885701] systemd[1]: Mounting Debug File System... [ 4.885962] systemd[1]: Starting Uncomplicated firewall... [ 4.885988] systemd[1]: Listening on LVM2 metadata daemon socket. [ 4.886313] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 4.886722] systemd[1]: Mounting POSIX Message Queue File System... [ 4.888592] systemd[1]: Starting Load Kernel Modules... [ 4.888849] systemd[1]: Started Braille Device Support. [ 4.889040] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.891288] systemd[1]: Reached target Remote File Systems. [ 4.891319] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.891381] systemd[1]: Created slice system-getty.slice. [ 4.892098] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 4.893091] systemd[1]: Starting Create Static Device Nodes in /dev... [ 4.893358] systemd[1]: Started Uncomplicated firewall. [ 4.895829] systemd[1]: Mounted Debug File System. [ 4.895874] systemd[1]: Mounted Huge Pages File System. [ 4.895910] systemd[1]: Mounted POSIX Message Queue File System. [ 4.907575] lp: driver loaded but no devices found [ 4.909572] ppdev: user-space parallel port driver [ 4.915261] systemd[1]: Started LVM2 metadata daemon. [ 4.916076] systemd[1]: Started Journal Service. [ 4.951293] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 4.957925] systemd-journald[360]: Received request to flush runtime journal from PID 1 [ 5.001857] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.003494] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 5.003498] mei_me 0000:00:16.0: can't derive routing for PCI INT A [ 5.003500] mei_me 0000:00:16.0: PCI INT A: no GSI [ 5.008319] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.008361] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 5.008385] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 5.008414] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 5.028173] Intel(R) Wireless WiFi driver for Linux [ 5.028175] Copyright(c) 2003- 2015 Intel Corporation [ 5.028267] pcieport 0000:00:1c.0: can't derive routing for PCI INT A [ 5.028269] iwlwifi 0000:01:00.0: PCI INT A: no GSI [ 5.030828] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-21.ucode failed with error -2 [ 5.030839] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-20.ucode failed with error -2 [ 5.030908] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-19.ucode failed with error -2 [ 5.030918] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-18.ucode failed with error -2 [ 5.030927] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-17.ucode failed with error -2 [ 5.039471] iwlwifi 0000:01:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm [ 5.047087] AVX2 version of gcm_enc/dec engaged. [ 5.047089] AES CTR mode by8 optimization enabled [ 5.069466] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208 [ 5.071203] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 5.071811] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 5.076818] snd_hda_intel 0000:00:1f.3: can't derive routing for PCI INT A [ 5.076821] snd_hda_intel 0000:00:1f.3: PCI INT A: no GSI [ 5.076869] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 5.101244] Adding 16674812k swap on /dev/sda5. Priority:-1 extents:1 across:16674812k SSFS [ 5.112071] media: Linux media interface: v0.10 [ 5.113229] Bluetooth: Core ver 2.21 [ 5.113247] NET: Registered protocol family 31 [ 5.113248] Bluetooth: HCI device and connection manager initialized [ 5.113251] Bluetooth: HCI socket layer initialized [ 5.113252] Bluetooth: L2CAP socket layer initialized [ 5.113256] Bluetooth: SCO socket layer initialized [ 5.116195] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 5.116197] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.116199] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 5.116200] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 5.116201] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 5.116202] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 5.116204] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 5.116205] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 5.118408] Linux video capture interface: v2.00 [ 5.119740] usbcore: registered new interface driver btusb [ 5.122613] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [ 5.128196] Bluetooth: hci0: Device revision is 5 [ 5.128198] Bluetooth: hci0: Secure boot is enabled [ 5.128199] Bluetooth: hci0: OTP lock is enabled [ 5.128200] Bluetooth: hci0: API lock is enabled [ 5.128201] Bluetooth: hci0: Debug lock is disabled [ 5.128202] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 5.129874] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 5.129958] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 5.130003] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 5.130038] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 5.130074] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 5.131258] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [ 5.134389] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b551) [ 5.136365] Bluetooth: hci0: Failed to send firmware data (-38) [ 5.137652] uvcvideo 1-11:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized! [ 5.137655] uvcvideo 1-11:1.0: Entity type for entity Extension 4 was not initialized! [ 5.137656] uvcvideo 1-11:1.0: Entity type for entity Processing 2 was not initialized! [ 5.137657] uvcvideo 1-11:1.0: Entity type for entity Camera 1 was not initialized! [ 5.137751] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/input/input16 [ 5.137795] usbcore: registered new interface driver uvcvideo [ 5.137798] USB Video Class driver (1.1.1) [ 5.228383] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 5.229596] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0 [ 5.462909] EXT4-fs (sdd): mounted filesystem with ordered data mode. Opts: (null) [ 5.519141] audit: type=1400 audit(1467224802.698:2): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ippusbxd" pid=838 comm="apparmor_parser" [ 5.521354] audit: type=1400 audit(1467224802.701:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=840 comm="apparmor_parser" [ 5.521831] audit: type=1400 audit(1467224802.701:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=832 comm="apparmor_parser" [ 5.521836] audit: type=1400 audit(1467224802.701:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=832 comm="apparmor_parser" [ 5.521839] audit: type=1400 audit(1467224802.701:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=832 comm="apparmor_parser" [ 5.521842] audit: type=1400 audit(1467224802.701:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=832 comm="apparmor_parser" [ 5.521908] audit: type=1400 audit(1467224802.701:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=836 comm="apparmor_parser" [ 5.522528] audit: type=1400 audit(1467224802.702:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=831 comm="apparmor_parser" [ 5.522532] audit: type=1400 audit(1467224802.702:10): apparmor="STATUS" operation="profile_load" name="chromium" pid=831 comm="apparmor_parser" [ 5.606738] cgroup: new mount options do not match the existing superblock, will be ignored [ 5.662148] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 5.665531] vboxdrv: Found 8 processor cores [ 5.682335] vboxdrv: TSC mode is Invariant, tentative frequency 2807982040 Hz [ 5.682337] vboxdrv: Successfully loaded version 5.0.22 (interface 0x00240000) [ 5.729739] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 5.731327] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 5.731573] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 5.881216] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 5.881471] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 5.885089] VBoxNetFlt: Successfully started. [ 5.886590] VBoxNetAdp: Successfully started. [ 5.888120] VBoxPciLinuxInit [ 5.889660] vboxpci: IOMMU not found (not registered) [ 5.959763] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 5.962714] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 6.233349] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 6.274853] fuse init (API version 7.24) [ 6.289485] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 6.525443] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.525446] Bluetooth: BNEP filters: protocol multicast [ 6.525449] Bluetooth: BNEP socket layer initialized [ 7.106615] logitech-hidpp-device 0003:046D:402D.0004: error in parameter [ 7.110614] logitech-hidpp-device 0003:046D:402D.0004: error in parameter [ 7.116610] logitech-hidpp-device 0003:046D:402D.0004: error in parameter [ 7.118601] logitech-hidpp-device 0003:046D:402D.0004: error in parameter [ 7.147213] Bluetooth: hci0: Reading Intel version information failed (-110) [ 7.150174] Bluetooth: hci0 command tx timeout [ 11.676836] wlp1s0: authenticate with 14:0c:76:55:12:bb [ 11.681546] wlp1s0: send auth to 14:0c:76:55:12:bb (try 1/3) [ 11.689905] wlp1s0: authenticated [ 11.690143] wlp1s0: associate with 14:0c:76:55:12:bb (try 1/3) [ 11.693693] wlp1s0: RX AssocResp from 14:0c:76:55:12:bb (capab=0x411 status=0 aid=2) [ 11.695135] wlp1s0: associated [ 11.695196] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 12.018996] usb 1-9: USB disconnect, device number 4 [ 12.328192] usb 1-9: new full-speed USB device number 9 using xhci_hcd [ 12.493956] usb 1-9: New USB device found, idVendor=8087, idProduct=0a2b [ 12.493958] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 12.495658] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [ 12.500650] Bluetooth: hci0: Device revision is 5 [ 12.500652] Bluetooth: hci0: Secure boot is enabled [ 12.500666] Bluetooth: hci0: OTP lock is enabled [ 12.500667] Bluetooth: hci0: API lock is enabled [ 12.500667] Bluetooth: hci0: Debug lock is disabled [ 12.500668] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 12.500841] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [ 13.995780] Bluetooth: hci0: Waiting for firmware download to complete [ 13.996623] Bluetooth: hci0: Firmware loaded in 1466401 usecs [ 13.996699] Bluetooth: hci0: Waiting for device to boot [ 14.008717] Bluetooth: hci0: Device booted in 11749 usecs [ 14.008913] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [ 14.010805] Bluetooth: hci0: Applying Intel DDC parameters completed [ 14.011803] Bluetooth: hci0: Setting Intel event mask failed (-16) [ 14.067762] Bluetooth: RFCOMM TTY layer initialized [ 14.067766] Bluetooth: RFCOMM socket layer initialized [ 14.067769] Bluetooth: RFCOMM ver 1.11 [ 14.353704] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 14.353721] Bluetooth: HIDP socket layer initialized [ 14.356286] hid-generic 0005:046D:B342.0006: unknown main item tag 0x0 [ 14.356388] input: Keyboard K380 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/bluetooth/hci0/hci0:256/0005:046D:B342.0006/input/input17 [ 14.356582] hid-generic 0005:046D:B342.0006: input,hidraw3: BLUETOOTH HID v42.00 Keyboard [Keyboard K380] on a4:34:d9:dc:ef:b9 [ 15.572345] hfsplus: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended. mounting read-only.