Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.30-0.89.rc7.fc12.x86_64 (mockbuild@x86-5.fedora.phx.redhat.com) (gcc version 4.4.0 20090514 (Red Hat 4.4.0-5) (GCC) ) #1 SMP Mon May 25 10:31:33 EDT 2009 Command line: ro root=/dev/VolGroup00/system rhbg kstack=32 selinux=false KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfeb0000 (usable) BIOS-e820: 00000000cfeb0000 - 00000000cfee3000 (ACPI NVS) BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data) BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) DMI 2.4 present. last_pfn = 0x130000 max_arch_pfn = 0x100000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CEFFF write-protect CF000-EFFFF uncachable F0000-FFFFF write-through MTRR variable ranges enabled: 0 base 000000000 mask F00000000 write-back 1 base 0E0000000 mask FE0000000 uncachable 2 base 0D0000000 mask FF0000000 uncachable 3 base 100000000 mask FC0000000 write-back 4 base 130000000 mask FF0000000 uncachable 5 base 0CFF00000 mask FFFF00000 uncachable 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 4GB, type WB reg 1, base: 3584MB, range: 512MB, type UC reg 2, base: 3328MB, range: 256MB, type UC reg 3, base: 4GB, range: 1GB, type WB reg 4, base: 4864MB, range: 256MB, type UC reg 5, base: 3327MB, range: 1MB, type UC total RAM coverred: 4095M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 2M num_reg: 6 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 3GB, range: 256MB, type WB reg 3, base: 3327MB, range: 1MB, type UC reg 4, base: 4GB, range: 512MB, type WB reg 5, base: 4608MB, range: 256MB, type WB x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcfeb0 max_arch_pfn = 0x100000000 init_memory_mapping: 0000000000000000-00000000cfeb0000 0000000000 - 00cfe00000 page 2M 00cfe00000 - 00cfeb0000 page 4k kernel direct mapping tables up to cfeb0000 @ 8000-e000 init_memory_mapping: 0000000100000000-0000000130000000 0100000000 - 0130000000 page 2M kernel direct mapping tables up to 130000000 @ c000-12000 RAMDISK: 37c76000 - 37fef6e9 ACPI: RSDP 00000000000f77f0 00014 (v00 GBT ) ACPI: RSDT 00000000cfee3040 00048 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: FACP 00000000cfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: DSDT 00000000cfee3180 04C52 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) ACPI: FACS 00000000cfeb0000 00040 ACPI: HPET 00000000cfee7f40 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) ACPI: MCFG 00000000cfee7fc0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: APIC 00000000cfee7e40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: SSDT 00000000cfee86e0 0018A (v01 PmRef Cpu0Cst 00003001 INTL 20040311) ACPI: SSDT 00000000cfee8870 0018A (v01 PmRef Cpu1Cst 00003001 INTL 20040311) ACPI: SSDT 00000000cfee8a00 0018A (v01 PmRef Cpu2Cst 00003001 INTL 20040311) ACPI: SSDT 00000000cfee8b90 0018A (v01 PmRef Cpu3Cst 00003001 INTL 20040311) ACPI: SSDT 00000000cfee8d20 003AB (v01 PmRef CpuPm 00003000 INTL 20040311) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-0000000130000000 Bootmem setup node 0 0000000000000000-0000000130000000 NODE_DATA [000000000000d000 - 0000000000024fff] bootmap [0000000000025000 - 000000000004afff] pages 26 (8 early reservations) ==> bootmem [0000000000 - 0130000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 00017d73f0] TEXT DATA BSS ==> [0000200000 - 00017d73f0] #3 [0037c76000 - 0037fef6e9] RAMDISK ==> [0037c76000 - 0037fef6e9] #4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000] #5 [00017d8000 - 00017d80f6] BRK ==> [00017d8000 - 00017d80f6] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] #7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] found SMP MP-table at [ffff8800000f59c0] f59c0 [ffffe20000000000-ffffe20007bfffff] PMD -> [ffff880028200000-ffff88002ebfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00130000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009e 0: 0x00000100 -> 0x000cfeb0 0: 0x00100000 -> 0x00130000 On node 0 totalpages: 1048142 DMA zone: 104 pages used for memmap DMA zone: 105 pages reserved DMA zone: 3789 pages, LIFO batch:0 DMA32 zone: 26520 pages used for memmap DMA32 zone: 821016 pages, LIFO batch:31 Normal zone: 4992 pages used for memmap Normal zone: 191616 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 00000000cfeb0000 - 00000000cfee3000 PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000 PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000 PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000 PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 Allocating PCI resources starting at e6000000 (gap: e4000000:1ac00000) NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 475 pages at ffff88002ec00000, static data 1916384 bytes Built 1 zonelists in Node order, mobility grouping on. Total pages: 1016421 Policy zone: Normal Kernel command line: ro root=/dev/VolGroup00/system rhbg kstack=32 selinux=false Initializing CPU#0 xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 NR_IRQS:4352 nr_irqs:440 PID hash table entries: 4096 (order: 12, 32768 bytes) Fast TSC calibration using PIT Detected 3166.608 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 6207 kB per task-struct memory footprint: 2688 bytes allocated 41943040 bytes of page_cgroup please try cgroup_disable=memory option if you don't want Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 3942884k/4980736k available (4868k kernel code, 788168k absent, 249684k reserved, 2650k data, 3160k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 ODEBUG: 12 of 12 active objects replaced hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 6333.21 BogoMIPS (lpj=3166608) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 0/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20090320 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 19437 entries in 77 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz stepping 0a lockdep: fixing up alternatives. Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6332.35 BogoMIPS (lpj=3166176) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (12665.56 BogoMIPS). sizeof(vma)=176 bytes sizeof(page)=104 bytes sizeof(inode)=1168 bytes sizeof(dentry)=256 bytes sizeof(ext3inode)=1600 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=9112 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 2360 bytes Booting paravirtualized kernel on bare hardware regulator: core version 0.5 Time: 23:03:37 Date: 05/25/09 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - e3ffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0xe500-0xe51f] pci 0000:00:1a.1: reg 20 io port: [0xe000-0xe01f] pci 0000:00:1a.2: reg 20 io port: [0xe100-0xe11f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xec400000-0xec4003ff] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xe200-0xe21f] pci 0000:00:1d.1: reg 20 io port: [0xe300-0xe31f] pci 0000:00:1d.2: reg 20 io port: [0xe400-0xe41f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xec401000-0xec4013ff] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000b) pci 0000:00:1f.2: reg 10 io port: [0xe600-0xe607] pci 0000:00:1f.2: reg 14 io port: [0xe700-0xe703] pci 0000:00:1f.2: reg 18 io port: [0xe800-0xe807] pci 0000:00:1f.2: reg 1c io port: [0xe900-0xe903] pci 0000:00:1f.2: reg 20 io port: [0xea00-0xea1f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xec402000-0xec4027ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0xec403000-0xec4030ff] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:01:00.0: reg 18 64bit mmio: [0xeb000000-0xeb00ffff] pci 0000:01:00.0: reg 20 io port: [0x9000-0x90ff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10 64bit mmio: [0xeb010000-0xeb013fff] pci 0000:01:00.1: supports D1 D2 pci 0000:00:01.0: bridge io port: [0x9000-0x9fff] pci 0000:00:01.0: bridge 32bit mmio: [0xea000000-0xebffffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:03:00.0: reg 24 32bit mmio: [0xec000000-0xec001fff] pci 0000:03:00.0: PME# supported from D3hot pci 0000:03:00.0: PME# disabled pci 0000:03:00.1: reg 10 io port: [0xa000-0xa007] pci 0000:03:00.1: reg 14 io port: [0xa100-0xa103] pci 0000:03:00.1: reg 18 io port: [0xa200-0xa207] pci 0000:03:00.1: reg 1c io port: [0xa300-0xa303] pci 0000:03:00.1: reg 20 io port: [0xa400-0xa40f] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.3: bridge io port: [0xa000-0xafff] pci 0000:00:1c.3: bridge 32bit mmio: [0xec000000-0xec0fffff] pci 0000:04:00.0: reg 10 io port: [0xb000-0xb0ff] pci 0000:04:00.0: reg 18 64bit mmio: [0xec310000-0xec310fff] pci 0000:04:00.0: reg 20 64bit mmio: [0xec300000-0xec30ffff] pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] pci 0000:04:00.0: supports D1 D2 pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:1c.4: bridge io port: [0xb000-0xbfff] pci 0000:00:1c.4: bridge 32bit mmio: [0xe8000000-0xe8ffffff] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xec300000-0xec3fffff] pci 0000:05:00.0: reg 10 io port: [0xc000-0xc0ff] pci 0000:05:00.0: reg 18 64bit mmio: [0xec110000-0xec110fff] pci 0000:05:00.0: reg 20 64bit mmio: [0xec100000-0xec10ffff] pci 0000:05:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] pci 0000:05:00.0: supports D1 D2 pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff] pci 0000:00:1c.5: bridge 32bit mmio: [0xe9000000-0xe9ffffff] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xec100000-0xec1fffff] pci 0000:06:00.0: reg 10 io port: [0xd000-0xd01f] pci 0000:06:00.0: supports D1 D2 pci 0000:06:00.2: reg 10 32bit mmio: [0xec204000-0xec2047ff] pci 0000:06:00.2: reg 14 32bit mmio: [0xec200000-0xec203fff] pci 0000:06:00.2: supports D1 D2 pci 0000:06:00.2: PME# supported from D0 D1 D2 D3hot pci 0000:06:00.2: PME# disabled pci 0000:06:01.0: reg 10 32bit mmio: [0xe4000000-0xe7ffffff] pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff] pci 0000:00:1e.0: bridge 32bit mmio: [0xec200000-0xec2fffff] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xe4000000-0xe7ffffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing pci 0000:03:00.0: BAR 2: can't allocate resource pci 0000:03:00.0: BAR 3: can't allocate resource NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default DMA-API: preallocated 32768 debug entries DMA-API: debugging enabled by kernel config hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x290-0x29f has been reserved system 00:01: ioport range 0x800-0x805 has been reserved system 00:01: ioport range 0x290-0x294 has been reserved system 00:01: ioport range 0x880-0x88f has been reserved system 00:01: ioport range 0x4c0-0x4ff could not be reserved system 00:07: ioport range 0x400-0x4bf could not be reserved system 00:08: iomem range 0xe0000000-0xe3ffffff has been reserved system 00:09: iomem range 0xd2000-0xd3fff has been reserved system 00:09: iomem range 0xf0000-0xf7fff could not be reserved system 00:09: iomem range 0xf8000-0xfbfff could not be reserved system 00:09: iomem range 0xfc000-0xfffff could not be reserved system 00:09: iomem range 0xcfeb0000-0xcfefffff could not be reserved system 00:09: iomem range 0x0-0x9ffff could not be reserved system 00:09: iomem range 0x100000-0xcfeaffff could not be reserved system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved system 00:09: iomem range 0xfed10000-0xfed1dfff has been reserved system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved system 00:09: iomem range 0xffb00000-0xffb7ffff has been reserved system 00:09: iomem range 0xfff00000-0xffffffff has been reserved system 00:09: iomem range 0xe0000-0xeffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x9000-0x9fff pci 0000:00:01.0: MEM window: 0xea000000-0xebffffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.3: IO window: 0xa000-0xafff pci 0000:00:1c.3: MEM window: 0xec000000-0xec0fffff pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.4: IO window: 0xb000-0xbfff pci 0000:00:1c.4: MEM window: 0xe8000000-0xe8ffffff pci 0000:00:1c.4: PREFETCH window: 0x000000ec300000-0x000000ec3fffff pci 0000:00:1c.5: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.5: IO window: 0xc000-0xcfff pci 0000:00:1c.5: MEM window: 0xe9000000-0xe9ffffff pci 0000:00:1c.5: PREFETCH window: 0x000000ec100000-0x000000ec1fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:1e.0: IO window: 0xd000-0xdfff pci 0000:00:1e.0: MEM window: 0xec200000-0xec2fffff pci 0000:00:1e.0: PREFETCH window: 0x000000e4000000-0x000000e7ffffff alloc irq_desc for 16 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 19 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 alloc irq_desc for 17 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] pci_bus 0000:01: resource 1 mem: [0xea000000-0xebffffff] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] pci_bus 0000:03: resource 0 io: [0xa000-0xafff] pci_bus 0000:03: resource 1 mem: [0xec000000-0xec0fffff] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff] pci_bus 0000:04: resource 1 mem: [0xe8000000-0xe8ffffff] pci_bus 0000:04: resource 2 pref mem [0xec300000-0xec3fffff] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff] pci_bus 0000:05: resource 1 mem: [0xe9000000-0xe9ffffff] pci_bus 0000:05: resource 2 pref mem [0xec100000-0xec1fffff] pci_bus 0000:06: resource 0 io: [0xd000-0xdfff] pci_bus 0000:06: resource 1 mem: [0xec200000-0xec2fffff] pci_bus 0000:06: resource 2 pref mem [0xe4000000-0xe7ffffff] pci_bus 0000:06: resource 3 io: [0x00-0xffff] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 10, 4718592 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 3557k freed audit: initializing netlink socket (disabled) type=2000 audit(1243292616.400:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7707 SELinux: Registering netfilter hooks cryptomgr_test used greatest stack depth: 5576 bytes left alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device alloc irq_desc for 24 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:01.0: setting latency timer to 64 alloc irq_desc for 25 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 26 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.3: setting latency timer to 64 alloc irq_desc for 27 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pcieport-driver 0000:00:1c.4: irq 27 for MSI/MSI-X pcieport-driver 0000:00:1c.4: setting latency timer to 64 alloc irq_desc for 28 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pcieport-driver 0000:00:1c.5: irq 28 for MSI/MSI-X pcieport-driver 0000:00:1c.5: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] ACPI: SSDT 00000000cfee80c0 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311) Marking TSC unstable due to TSC halts in idle Switched to high resolution mode on CPU 0 ACPI: CPU0 (power states: C1[C1]<7>Switched to high resolution mode on CPU 1 C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 00000000cfee8580 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff88012fad2b60), AE_ALREADY_EXISTS ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 alloc irq_desc for 29 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 ahci 0000:00:1f.2: irq 29 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xec402000 port 0xec402100 irq 29 ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 29 ata3: SATA max UDMA/133 abar m2048@0xec402000 port 0xec402200 irq 29 ata4: SATA max UDMA/133 abar m2048@0xec402000 port 0xec402280 irq 29 ata5: SATA max UDMA/133 abar m2048@0xec402000 port 0xec402300 irq 29 ata6: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 29 work_for_cpu used greatest stack depth: 5080 bytes left ahci 0000:03:00.0: device not available because of BAR 2 [0x00-0x07] collisions ahci: probe of 0000:03:00.0 failed with error -22 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver alloc irq_desc for 18 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xec400000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.30-0.89.rc7.fc12.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected work_for_cpu used greatest stack depth: 3976 bytes left alloc irq_desc for 23 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xec401000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.30-0.89.rc7.fc12.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e500 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.30-0.89.rc7.fc12.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected alloc irq_desc for 21 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.30-0.89.rc7.fc12.x86_64 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e100 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.30-0.89.rc7.fc12.x86_64 uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.30-0.89.rc7.fc12.x86_64 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.30-0.89.rc7.fc12.x86_64 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.30-0.89.rc7.fc12.x86_64 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected PNP: No PS/2 controller found. Probing ports directly. Failed to disable AUX port, but continuing anyway... Is this a SiS? If AUX port is really absent please use the 'i8042.noaux' option. usb 1-1: new high speed USB device using ehci_hcd and address 2 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 Magic number: 9:825:100 Initalizing network drop monitor service usb 1-1: New USB device found, idVendor=04cc, idProduct=1520 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: HPA detected: current 586112591, native 586114704 ata1.00: ATA-7: Maxtor 6L300S0, BANC1G10, max UDMA/133 ata1.00: 586112591 sectors, multi 0: LBA48 NCQ (not used) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA Maxtor 6L300S0 BANC PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 586112591 512-byte hardware sectors: (300 GB/279 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk usb 8-1: new low speed USB device using uhci_hcd and address 2 usb 8-1: New USB device found, idVendor=045e, idProduct=00db usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 8-1: Product: Natural® Ergonomic Keyboard 4000 usb 8-1: Manufacturer: Microsoft usb 8-1: configuration #1 chosen from 1 choice input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3 microsoft 0003:045E:00DB.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.2-1/input0 input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input4 microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.2-1/input1 usb 1-1.1: new low speed USB device using ehci_hcd and address 3 usb 1-1.1: New USB device found, idVendor=045e, idProduct=0024 usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.1: Product: Microsoft Trackball Explorer® usb 1-1.1: Manufacturer: Microsoft usb 1-1.1: configuration #1 chosen from 1 choice input: Microsoft Microsoft Trackball Explorer® as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input5 generic-usb 0003:045E:0024.0003: input,hidraw2: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Explorer®] on usb-0000:00:1a.7-1.1/input0 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-7: Maxtor 6L300S0, BANC1G10, max UDMA/133 ata2.00: 586114704 sectors, multi 0: LBA48 NCQ (not used) ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA Maxtor 6L300S0 BANC PQ: 0 ANSI: 5 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 1:0:0:0: [sdb] 586114704 512-byte hardware sectors: (300 GB/279 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sd 1:0:0:0: [sdb] Attached SCSI disk ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata6.00: ATAPI: PLEXTOR DVDR PX-716A, 1.11, max UDMA/66 ata6.00: applying bridge limits ata6.00: configured for UDMA/66 scsi 5:0:0:0: CD-ROM PLEXTOR DVDR PX-716A 1.11 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 5:0:0:0: Attached scsi CD-ROM sr0 sr 5:0:0:0: Attached scsi generic sg2 type 5 Freeing unused kernel memory: 3160k freed Write protecting the kernel read-only data: 6952k md: raid1 personality registered for level 1 md: md1 stopped. md: bind md: bind raid1: raid set md1 active with 2 out of 2 mirrors md1: unknown partition table async/5 used greatest stack depth: 3928 bytes left kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1243292623.426:2): selinux=0 auid=4294967295 ses=4294967295 sh used greatest stack depth: 3392 bytes left hostname used greatest stack depth: 3328 bytes left mount used greatest stack depth: 2816 bytes left awk used greatest stack depth: 2656 bytes left sed used greatest stack depth: 2480 bytes left udev: starting version 141 pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pata_jmicron 0000:03:00.1: setting latency timer to 64 scsi6 : pata_jmicron scsi7 : pata_jmicron ata7: PATA max UDMA/100 cmd 0xa000 ctl 0xa100 bmdma 0xa400 irq 16 ata8: PATA max UDMA/100 cmd 0xa200 ctl 0xa300 bmdma 0xa408 irq 16 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 r8169 0000:04:00.0: setting latency timer to 64 alloc irq_desc for 30 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 r8169 0000:04:00.0: irq 30 for MSI/MSI-X eth0: RTL8168c/8111c at 0xffffc20006186000, 00:1f:d0:20:5f:9f, XID 3c4000c0 IRQ 30 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 r8169 0000:05:00.0: setting latency timer to 64 alloc irq_desc for 31 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 r8169 0000:05:00.0: irq 31 for MSI/MSI-X eth1: RTL8168c/8111c at 0xffffc20000670000, 00:1f:d0:20:5f:9d, XID 3c4000c0 IRQ 31 iTCO_vendor_support: vendor-support=0 ata7.00: HPA detected: current 160084415, native 160086528 ata7.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 ata7.00: 160084415 sectors, multi 16: LBA ata7.00: configured for UDMA/100 scsi 6:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 sd 6:0:0:0: Attached scsi generic sg3 type 0 sd 6:0:0:0: [sdc] 160084415 512-byte hardware sectors: (81.9 GB/76.3 GiB) sd 6:0:0:0: [sdc] Write Protect is off sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sd 6:0:0:0: [sdc] Attached SCSI disk input: PC Speaker as /devices/platform/pcspkr/input/input6 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware iTCO_wdt: No card detected i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 firewire_ohci 0000:06:00.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Linux video capture interface: v2.00 firewire_ohci: Added fw-ohci device 0000:06:00.2, OHCI version 1.10 ivtv: Start initialization, version 1.4.1 alloc irq_desc for 20 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 EMU10K1_Audigy 0000:06:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ALSA sound/pci/emu10k1/emu10k1_main.c:811: emu1010: Special config. ALSA sound/pci/emu10k1/emu10k1_main.c:850: emu1010: EMU_HANA_ID = 0x7f ALSA sound/pci/emu10k1/emu10k1_main.c:869: emu1010: filename emu/hana.fw testing EMU10K1_Audigy 0000:06:00.0: firmware: requesting emu/hana.fw HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:01:00.1: setting latency timer to 64 ALSA sound/pci/hda/hda_generic.c:679: hda_generic: no proper input path found ALSA sound/pci/hda/hda_generic.c:427: hda_generic: no proper output path found ALSA sound/pci/hda/hda_generic.c:1026: hda_generic: no PCM found firewire_core: created device fw0: GUID 00023c012100510f, S400 ALSA sound/pci/emu10k1/emu10k1_main.c:674: firmware size = 0x133a4 ALSA sound/pci/emu10k1/emu10k1_main.c:886: emu1010: Hana Firmware loaded ALSA sound/pci/emu10k1/emu10k1_main.c:889: emu1010: Hana version: 3.4 ALSA sound/pci/emu10k1/emu10k1_main.c:894: emu1010: Card options = 0x0 ALSA sound/pci/emu10k1/emu10k1_main.c:896: emu1010: Card options = 0x0 ALSA sound/pci/emu10k1/emu10k1_main.c:935: emu1010: Card options3 = 0x0 ALSA sound/pci/emu10k1/emufx.c:1522: EMU outputs on ALSA sound/pci/emu10k1/emufx.c:1578: EMU inputs on ivtv0: Initializing card 0 ivtv0: Autodetected Hauppauge card (cx23416 based) ivtv 0000:06:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tveeprom 1-0050: The eeprom says no radio is present, but the tuner type tveeprom 1-0050: indicates otherwise. I will assume that radio is present. tveeprom 1-0050: Hauppauge model 26039, rev C1A5, serial# 8203263 tveeprom 1-0050: tuner model is TCL MPE05-2 (idx 105, type 38) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 1-0050: audio processor is CX25842 (idx 36) tveeprom 1-0050: decoder processor is CX25842 (idx 29) tveeprom 1-0050: has radio, has IR receiver, has IR transmitter ivtv0: Autodetected Hauppauge WinTV PVR-150 ivtv0: Reopen i2c bus for IR-blaster support cx25840 1-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0) tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 1-0043: creating new instance tda9887 1-0043: tda988[5/6/7] found tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) tuner-simple 1-0061: creating new instance tuner-simple 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) IRQ 19/ivtv0: IRQF_DISABLED is not guaranteed on shared IRQs ------------[ cut here ]------------ WARNING: at lib/dma-debug.c:620 check_sync+0x272/0x441() Hardware name: EP45-DS5 ivtv 0000:06:01.0: DMA-API: device driver syncs DMA memory with different direction [device address=0x0000000020070000] [size=12 bytes] [mapped with DMA_FROM_DEVICE] [synced with DMA_TO_DEVICE] Modules linked in: tuner_simple tuner_types wm8775 tda9887 tda8290 tuner cx25840 snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_event snd_seq_midi_emul snd_seq snd_hda_intel ivtv(+) snd_emu10k1 i2c_algo_bit snd_hda_codec cx2341x snd_rawmidi snd_ac97_codec v4l2_common videodev ac97_bus firewire_ohci snd_seq_device firewire_core v4l1_compat snd_pcm ata_generic snd_util_mem i2c_i801 v4l2_compat_ioctl32 iTCO_wdt pata_acpi tveeprom i2c_core pcspkr crc_itu_t snd_hwdep iTCO_vendor_support r8169 snd_timer snd mii soundcore pata_jmicron snd_page_alloc raid1 [last unloaded: scsi_wait_scan] Pid: 1062, comm: work_for_cpu Not tainted 2.6.30-0.89.rc7.fc12.x86_64 #1 Call Trace: [] warn_slowpath_common+0x8d/0xbb [] warn_slowpath_fmt+0x50/0x66 [] ? get_hash_bucket+0x3b/0x5d [] check_sync+0x272/0x441 [] debug_dma_sync_single_for_cpu+0x30/0x46 [] pci_dma_sync_single_for_cpu+0x7f/0x9e [ivtv] [] ivtv_stream_alloc+0x1f8/0x335 [ivtv] [] ivtv_streams_setup+0x337/0x382 [ivtv] [] ivtv_probe+0x13f4/0x1543 [ivtv] [] ? finish_task_switch+0x4f/0x122 [] ? thread_return+0x4e/0xbc [] ? _spin_unlock_irqrestore+0x5a/0x7f [] ? trace_hardirqs_on_caller+0x139/0x173 [] local_pci_probe+0x2a/0x42 [] do_work_for_cpu+0x27/0x50 [] ? do_work_for_cpu+0x0/0x50 [] kthread+0x6d/0xae [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? kthread+0x0/0xae [] ? child_rip+0x0/0x20 ---[ end trace 08f9d5aa2be9be7e ]--- Mapped at: [] debug_dma_map_page+0x5b/0x116 [] pci_map_single+0xd3/0xfa [ivtv] [] ivtv_stream_alloc+0x1d2/0x335 [ivtv] [] ivtv_streams_setup+0x337/0x382 [ivtv] [] ivtv_probe+0x13f4/0x1543 [ivtv] ivtv0: Registered device video0 for encoder MPG (4096 kB) ivtv0: Registered device video32 for encoder YUV (2048 kB) ivtv0: Registered device vbi0 for encoder VBI (1024 kB) ivtv0: Registered device video24 for encoder PCM (320 kB) ivtv0: Registered device radio0 for encoder radio ivtv0: Initialized card: Hauppauge WinTV PVR-150 ivtv: End initialization ivtv 0000:06:01.0: firmware: requesting v4l-cx2341x-enc.fw ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 cx25840 1-0044: firmware: requesting v4l-cx25840.fw cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) md: md0 stopped. md: bind md: bind raid1: raid set md0 active with 2 out of 2 mirrors md0: detected capacity change from 0 to 2146697216 md0: unknown partition table EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2096472k swap on /dev/sda2. Priority:-1 extents:1 across:2096472k Adding 2096472k swap on /dev/sdb2. Priority:-2 extents:1 across:2096472k