# rmmod ath9k # dmesg -c Linux version 2.6.29-ARCH (root@cruiser) (gcc version 4.4.0 (GCC) ) #1 SMP PREEMPT Mon May 18 12:46:15 CST 2009 Command line: root=/dev/sda3 ro vga=773 resume=/dev/sda2 elevator=noop KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e000 (usable) BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cf6d0000 (usable) BIOS-e820: 00000000cf6d0000 - 00000000cf6df000 (ACPI data) BIOS-e820: 00000000cf6df000 - 00000000cf6e3000 (ACPI NVS) BIOS-e820: 00000000cf6e3000 - 00000000d0000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) DMI 2.4 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. last_pfn = 0x130000 max_arch_pfn = 0x100000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xcf6d0 max_arch_pfn = 0x100000000 Scanning 0 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009e000 (usable) modified: 000000000009e000 - 00000000000a0000 (reserved) modified: 00000000000e0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 00000000cf6d0000 (usable) modified: 00000000cf6d0000 - 00000000cf6df000 (ACPI data) modified: 00000000cf6df000 - 00000000cf6e3000 (ACPI NVS) modified: 00000000cf6e3000 - 00000000d0000000 (reserved) modified: 00000000f8000000 - 00000000fc000000 (reserved) modified: 00000000fec00000 - 00000000fec10000 (reserved) modified: 00000000fed00000 - 00000000fed00400 (reserved) modified: 00000000fed14000 - 00000000fed1a000 (reserved) modified: 00000000fed1c000 - 00000000fed90000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000ff000000 - 0000000100000000 (reserved) modified: 0000000100000000 - 0000000130000000 (usable) init_memory_mapping: 0000000000000000-00000000cf6d0000 0000000000 - 00cf600000 page 2M 00cf600000 - 00cf6d0000 page 4k kernel direct mapping tables up to cf6d0000 @ 10000-16000 last_map_addr: cf6d0000 end: cf6d0000 init_memory_mapping: 0000000100000000-0000000130000000 0100000000 - 0130000000 page 2M kernel direct mapping tables up to 130000000 @ 14000-1a000 last_map_addr: 130000000 end: 130000000 RAMDISK: 37f27000 - 37fef933 ACPI: RSDP 000F61C0, 0024 (r2 FUJ ) ACPI: XSDT CF6D4CA0, 0074 (r1 FUJ PC 1180000 FUJ 100) ACPI: FACP CF6DD0B1, 00F4 (r3 FUJ PC 1180000 FUJ 100) FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT CF6D4D14, 839D (r1 FUJ FJNB1D3 1180000 FUJ 100) ACPI: FACS CF6E2FC0, 0040 ACPI: HPET CF6DD1A5, 0038 (r1 FUJ FJNB1D3 1180000 FUJ 100) ACPI: MCFG CF6DD1DD, 003C (r1 FUJ FJNB1D3 1180000 FUJ 100) ACPI: SSDT CF6DD219, 04EF (r1 FUJ FJNB1D3 1180000 FUJ 100) ACPI: SSDT CF6DD708, 01CA (r1 FUJ FJNB1D3 1180000 FUJ 100) ACPI: SSDT CF6DD8D2, 106D (r1 FUJ FJNB1D3 1180000 FUJ 100) ACPI: SSDT CF6DE93F, 0447 (r1 FUJ FJNB1D3 1180000 FUJ 100) ACPI: APIC CF6DED86, 0068 (r1 FUJ FJNB1D3 1180000 FUJ 100) ACPI: BOOT CF6DEDEE, 0028 (r1 FUJ FJNB1D3 1180000 FUJ 100) ACPI: SLIC CF6DEE16, 0176 (r1 FUJ PC 1180000 FUJ 100) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 0130000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000076fb50] TEXT DATA BSS ==> [0000200000 - 000076fb50] #3 [0037f27000 - 0037fef933] RAMDISK ==> [0037f27000 - 0037fef933] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] #5 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] #6 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000] [ffffe20000000000-ffffe200043fffff] PMD -> [ffff880028200000-ffff88002c5fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00130000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009e 0: 0x00000100 -> 0x000cf6d0 0: 0x00100000 -> 0x00130000 On node 0 totalpages: 1046110 DMA zone: 56 pages used for memmap DMA zone: 1497 pages reserved DMA zone: 2429 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 831240 pages, LIFO batch:31 Normal zone: 2688 pages used for memmap Normal zone: 193920 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000cf6d0000 - 00000000cf6df000 PM: Registered nosave memory: 00000000cf6df000 - 00000000cf6e3000 PM: Registered nosave memory: 00000000cf6e3000 - 00000000d0000000 PM: Registered nosave memory: 00000000d0000000 - 00000000f8000000 PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000 PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000 PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000 PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 Allocating PCI resources starting at d4000000 (gap: d0000000:28000000) NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Allocating 53248 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1027589 Kernel command line: root=/dev/sda3 ro vga=773 resume=/dev/sda2 elevator=noop Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 1994.929 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 4035024k/4980736k available (2782k kernel code, 796296k absent, 148432k reserved, 1210k data, 380k init) SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.10 BogoMIPS (lpj=6649763) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20081204 ACPI: Checking initramfs for custom DSDT Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3991.24 BogoMIPS (lpj=6649995) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (7983.34 BogoMIPS). net_namespace: 1824 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in E820 PCI: Using MMCONFIG at f8000000 - fbffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: CF6E2A9F, 03B7 (r1 FUJ FJNB1D3 1180000 FUJ 100) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: ACPI Dock Station Driver: 1 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xfc000000-0xfc0fffff] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] pci 0000:00:02.1: reg 10 64bit mmio: [0xfc100000-0xfc1fffff] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc704800-0xfc704bff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc700000-0xfc703fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc704c00-0xfc704fff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at fd00 (mask 007f) pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] pci 0000:00:1f.2: reg 10 io port: [0x1c00-0x1c07] pci 0000:00:1f.2: reg 14 io port: [0x18d4-0x18d7] pci 0000:00:1f.2: reg 18 io port: [0x18d8-0x18df] pci 0000:00:1f.2: reg 1c io port: [0x18d0-0x18d3] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc704000-0xfc7047ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f] pci 0000:04:00.0: reg 10 64bit mmio: [0xfc300000-0xfc303fff] pci 0000:04:00.0: reg 18 io port: [0x2000-0x20ff] pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:04:00.0: supports D1 D2 pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.0: bridge 32bit mmio: [0xfc300000-0xfc3fffff] pci 0000:0c:00.0: reg 10 64bit mmio: [0xfc200000-0xfc20ffff] pci 0000:0c:00.0: supports D1 pci 0000:0c:00.0: PME# supported from D0 D1 D3hot pci 0000:0c:00.0: PME# disabled pci 0000:00:1c.2: bridge 32bit mmio: [0xfc200000-0xfc2fffff] pci 0000:1c:03.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:1c:03.0: supports D1 D2 pci 0000:1c:03.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:1c:03.0: PME# disabled pci 0000:1c:03.2: reg 10 32bit mmio: [0xfc402800-0xfc4028ff] pci 0000:1c:03.2: supports D1 D2 pci 0000:1c:03.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:1c:03.2: PME# disabled pci 0000:1c:03.3: reg 10 32bit mmio: [0xfc400000-0xfc400fff] pci 0000:1c:03.3: supports D1 D2 pci 0000:1c:03.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:1c:03.3: PME# disabled pci 0000:1c:03.4: reg 10 32bit mmio: [0xfc401000-0xfc401fff] pci 0000:1c:03.4: reg 14 32bit mmio: [0xfc402000-0xfc4027ff] pci 0000:1c:03.4: supports D1 D2 pci 0000:1c:03.4: PME# supported from D0 D1 D2 D3hot pci 0000:1c:03.4: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xfc400000-0xfc4fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x680-0x69f has been reserved system 00:01: ioport range 0x800-0x80f has been reserved system 00:01: ioport range 0x1000-0x107f has been reserved system 00:01: ioport range 0x1080-0x10ff has been reserved system 00:01: ioport range 0x1100-0x111f has been reserved system 00:01: ioport range 0x1180-0x11bf has been reserved system 00:01: ioport range 0x1640-0x164f has been reserved system 00:01: ioport range 0xf800-0xf87f has been reserved system 00:01: ioport range 0xf880-0xf8ff has been reserved system 00:01: ioport range 0xfc00-0xfc7f has been reserved system 00:01: ioport range 0xfc80-0xfcff has been reserved system 00:01: ioport range 0xfd00-0xfd7f has been reserved system 00:01: ioport range 0xfe00-0xfe03 has been reserved system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved system 00:02: iomem range 0xf8000000-0xfbffffff has been reserved system 00:02: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:02: iomem range 0xfed40000-0xfed44fff has been reserved system 00:02: iomem range 0xfed45000-0xfed8ffff has been reserved system 00:02: iomem range 0xfef00000-0xfeffffff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.0: IO window: 0x2000-0x2fff pci 0000:00:1c.0: MEM window: 0xfc300000-0xfc3fffff pci 0000:00:1c.0: PREFETCH window: 0x000000d8000000-0x000000d80fffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:0c pci 0000:00:1c.2: IO window: disabled pci 0000:00:1c.2: MEM window: 0xfc200000-0xfc2fffff pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:1c:03.0: CardBus bridge, secondary bus 0000:1d pci 0000:1c:03.0: IO window: 0x003000-0x0030ff pci 0000:1c:03.0: IO window: 0x003400-0x0034ff pci 0000:1c:03.0: PREFETCH window: 0xd4000000-0xd7ffffff pci 0000:1c:03.0: MEM window: 0xdc000000-0xdfffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:1c pci 0000:00:1e.0: IO window: 0x3000-0x3fff pci 0000:00:1e.0: MEM window: 0xfc400000-0xfc4fffff pci 0000:00:1e.0: PREFETCH window: 0x000000d4000000-0x000000d7ffffff pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:1c:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:04: resource 0 io: [0x2000-0x2fff] pci_bus 0000:04: resource 1 mem: [0xfc300000-0xfc3fffff] pci_bus 0000:04: resource 2 mem: [0xd8000000-0xd80fffff] pci_bus 0000:04: resource 3 mem: [0x0-0x0] pci_bus 0000:0c: resource 0 mem: [0x0-0x0] pci_bus 0000:0c: resource 1 mem: [0xfc200000-0xfc2fffff] pci_bus 0000:0c: resource 2 mem: [0x0-0x0] pci_bus 0000:0c: resource 3 mem: [0x0-0x0] pci_bus 0000:1c: resource 0 io: [0x3000-0x3fff] pci_bus 0000:1c: resource 1 mem: [0xfc400000-0xfc4fffff] pci_bus 0000:1c: resource 2 mem: [0xd4000000-0xd7ffffff] pci_bus 0000:1c: resource 3 io: [0x00-0xffff] pci_bus 0000:1c: resource 4 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:1d: resource 0 io: [0x3000-0x30ff] pci_bus 0000:1d: resource 1 io: [0x3400-0x34ff] pci_bus 0000:1d: resource 2 mem: [0xd4000000-0xd7ffffff] pci_bus 0000:1d: resource 3 mem: [0xdc000000-0xdfffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 802k freed Simple Boot Flag at 0x7b set to 0x1 Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1242725149.310:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7884 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered (default) io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.2: irq 25 for MSI/MSI-X vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20004100000, using 1536k, total 7616k vesafb: mode is 1024x768x8, linelength=1024, pages=8 vesafb: scrolling: redraw vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0f13:PS2M] at 0x0,0x0 irq 12 PNP: PS/2 controller has invalid data port 0x0; using default 0x60 PNP: PS/2 controller has invalid command port 0x0; using default 0x64 PNP: PS/2 controller doesn't have KBD irq; using default 1 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 registered taskstats version 1 Freeing unused kernel memory: 380k freed SCSI subsystem initialized libata version 3.00 loaded. pata_acpi 0000:00:1f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pata_acpi 0000:00:1f.1: setting latency timer to 64 pata_acpi 0000:00:1f.1: PCI INT A disabled ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ahci 0000:00:1f.2: irq 26 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xfc704000 port 0xfc704100 irq 26 ata2: SATA max UDMA/133 abar m2048@0xfc704000 port 0xfc704180 irq 26 ata3: SATA max UDMA/133 abar m2048@0xfc704000 port 0xfc704200 irq 26 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04) ata1.00: ATA-8: SiliconHardDisk, 02.10102, max UDMA/100 ata1.00: 250445824 sectors, multi 0: LBA ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04) ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA SiliconHardDisk 02.1 PQ: 0 ANSI: 5 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi3 : ata_piix scsi4 : ata_piix ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 250445824 512-byte hardware sectors: (128 GB/119 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 250445824 512-byte hardware sectors: (128 GB/119 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk PM: Starting manual resume from disk kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs udev: starting version 141 ACPI: SSDT CF6DFC19, 027A (r1 FUJ FJNB1D3 1180000 FUJ 100) ACPI: SSDT CF6E0119, 0627 (r1 FUJ FJNB1D3 1180000 FUJ 100) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device0 Marking TSC unstable due to TSC halts in idle ACPI: SSDT CF6E0061, 00B8 (r1 FUJ FJNB1D3 1180000 FUJ 100) ACPI: SSDT CF6E0740, 0047 (r1 FUJ FJNB1D3 1180000 FUJ 100) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:01: registered as cooling_device1 fuse init (API version 7.11) ACPI: AC Adapter [AC] (on-line) ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Battery Slot [CMB1] (battery present) ACPI: Battery Slot [CMB2] (battery absent) input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 ACPI: Lid Switch [LID] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 ACPI: Power Button (CM) [PWRB] thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (27 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [TZ01] (27 C) agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb sky2 driver version 1.22 sky2 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sky2 0000:04:00.0: setting latency timer to 64 sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3 sky2 0000:04:00.0: Marvell Yukon 88E8055 Gigabit Ethernet Controller Part Number: 88E8055 Engineering Level: Rev. 1.4 Manufacturer: Marvell sky2 0000:04:00.0: irq 27 for MSI/MSI-X sky2 eth0: addr 00:17:42:88:92:5e ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT B -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc704800 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc704c00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:1b.0: setting latency timer to 64 cfg80211: Calling CRDA to update world regulatory domain input: Fujitsu FUJ02B1 as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/FUJ02B1:00/input/input5 ACPI: Fujitsu FUJ02B1 [FJEX] (on) input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input6 ACPI: Fujitsu FUJ02E3 [FEXT] (on) fujitsu-laptop: BTNI: [0xff0101] fujitsu-laptop: driver 0.5.0 successfully loaded. acpi device:05: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/input/input7 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) uhci_hcd: USB Universal Host Controller Interface driver ath9k: 0.1 ath9k 0000:0c:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ath9k 0000:0c:00.0: setting latency timer to 64 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 22, io base 0x00001820 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected i801_smbus 0000:00:1f.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 22, io base 0x00001840 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 22, io base 0x00001860 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 22, io base 0x00001880 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 22, io base 0x000018a0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected yenta_cardbus 0000:1c:03.0: CardBus bridge found [10cf:143d] yenta_cardbus 0000:1c:03.0: O2: res at 0x94/0xD4: 00/ea yenta_cardbus 0000:1c:03.0: O2: enabling read prefetch/write burst wmaster0 (ath9k): not using net_device_ops yet phy0: Selected rate control algorithm 'ath9k_rate_control' input: PC Speaker as /devices/platform/pcspkr/input/input8 wlan0 (ath9k): not using net_device_ops yet Registered led device: ath9k-phy0:radio Registered led device: ath9k-phy0:assoc Registered led device: ath9k-phy0:tx Registered led device: ath9k-phy0:rx phy0: Atheros AR5418 MAC/BB Rev:2 AR5133 RF Rev:81: mem=0xffffc200043a0000, irq=18 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sd 0:0:0:0: Attached scsi generic sg0 type 0 cfg80211: Calling CRDA for country: CN yenta_cardbus 0000:1c:03.0: ISA IRQ mask 0x0cb8, PCI irq 16 yenta_cardbus 0000:1c:03.0: Socket status: 30000006 pci_bus 0000:1c: Raising subordinate bus# of parent bus (#1c) from #1d to #20 yenta_cardbus 0000:1c:03.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff yenta_cardbus 0000:1c:03.0: pcmcia: parent PCI bridge Memory window: 0xfc400000 - 0xfc4fffff yenta_cardbus 0000:1c:03.0: pcmcia: parent PCI bridge Memory window: 0xd4000000 - 0xd7ffffff sdhci-pci 0000:1c:03.2: SDHCI controller found [1217:7120] (rev 2) sdhci-pci 0000:1c:03.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 mmc0: Unknown controller version (2). You may experience problems. Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:1c:03.2] using PIO ohci1394 0000:1c:03.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fc401000-fc4017ff] Max Packet=[2048] IR/IT contexts=[8/8] cfg80211: Regulatory domain changed to country: CN (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) usb 5-2: new full speed USB device using uhci_hcd and address 2 usb 5-2: configuration #1 chosen from 1 choice Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x202000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9 EXT3 FS on sda3, internal journal EXT4-fs: barriers enabled kjournald2 starting: pid 3435, dev sda4:8, commit interval 5 seconds EXT4 FS on sda4, internal journal on sda4:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem sda4 with ordered data mode Adding 4200988k swap on /dev/sda2. Priority:-1 extents:1 across:4200988k Clocksource tsc unstable (delta = -140291099 ns) ieee1394: Host added: ID:BUS[0-00:1023] GUID[00000e1003f1c9f4] NET: Registered protocol family 10 lo: Disabled Privacy Extensions Bluetooth: Core ver 2.14 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bridge firewalling registered Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [drm] MTRR allocation failed. Graphics performance may suffer. pci 0000:00:02.0: irq 28 for MSI/MSI-X [drm] Initialized i915 1.6.0 20080730 on minor 0 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 ath9k 0000:0c:00.0: PCI INT A disabled ath9k: Driver unloaded # cat /proc/interrupts CPU0 CPU1 0: 7292 7181 IO-APIC-edge timer 1: 386 366 IO-APIC-edge i8042 8: 69 68 IO-APIC-edge rtc0 9: 46 49 IO-APIC-fasteoi acpi 12: 326 322 IO-APIC-edge i8042 14: 0 0 IO-APIC-edge ata_piix 15: 0 0 IO-APIC-edge ata_piix 16: 5 4 IO-APIC-fasteoi yenta, mmc0, ohci1394 21: 156 160 IO-APIC-fasteoi HDA Intel 22: 10 14 IO-APIC-fasteoi uhci_hcd:usb3, uhci_hcd:usb4, uhci_hcd:usb5, uhci_hcd:usb6, uhci_hcd:usb7 23: 1 1 IO-APIC-fasteoi ehci_hcd:usb1, ehci_hcd:usb2 26: 4473 4506 PCI-MSI-edge ahci 27: 0 1 PCI-MSI-edge eth0 28: 351 378 PCI-MSI-edge i915@pci:0000:00:02.0 NMI: 0 0 Non-maskable interrupts LOC: 7780 7658 Local timer interrupts RES: 4333 4835 Rescheduling interrupts CAL: 64 71 Function call interrupts TLB: 58 68 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts SPU: 0 0 Spurious interrupts ERR: 0 MIS: 0 # modprobe ath9k # dmesg -c ath9k: 0.1 ath9k 0000:0c:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ath9k 0000:0c:00.0: setting latency timer to 64 wmaster0 (ath9k): not using net_device_ops yet phy1: Selected rate control algorithm 'ath9k_rate_control' wlan0 (ath9k): not using net_device_ops yet Registered led device: ath9k-phy1:radio Registered led device: ath9k-phy1:assoc Registered led device: ath9k-phy1:tx Registered led device: ath9k-phy1:rx phy1: Atheros AR5418 MAC/BB Rev:2 AR5133 RF Rev:81: mem=0xffffc200043c0000, irq=18 # cat /proc/interrupts CPU0 CPU1 0: 8291 8188 IO-APIC-edge timer 1: 437 409 IO-APIC-edge i8042 8: 69 68 IO-APIC-edge rtc0 9: 46 49 IO-APIC-fasteoi acpi 12: 326 322 IO-APIC-edge i8042 14: 0 0 IO-APIC-edge ata_piix 15: 0 0 IO-APIC-edge ata_piix 16: 5 4 IO-APIC-fasteoi yenta, mmc0, ohci1394 18: 0 0 IO-APIC-fasteoi ath 21: 156 160 IO-APIC-fasteoi HDA Intel 22: 10 14 IO-APIC-fasteoi uhci_hcd:usb3, uhci_hcd:usb4, uhci_hcd:usb5, uhci_hcd:usb6, uhci_hcd:usb7 23: 1 1 IO-APIC-fasteoi ehci_hcd:usb1, ehci_hcd:usb2 26: 4481 4512 PCI-MSI-edge ahci 27: 0 1 PCI-MSI-edge eth0 28: 406 432 PCI-MSI-edge i915@pci:0000:00:02.0 NMI: 0 0 Non-maskable interrupts LOC: 8446 8635 Local timer interrupts RES: 4678 5241 Rescheduling interrupts CAL: 77 72 Function call interrupts TLB: 58 68 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts SPU: 0 0 Spurious interrupts ERR: 0 MIS: 0 # ip link set wlan0 up # dmesg -c ADDRCONF(NETDEV_UP): wlan0: link is not ready # cat /proc/interrupts CPU0 CPU1 0: 9322 9234 IO-APIC-edge timer 1: 473 437 IO-APIC-edge i8042 8: 69 68 IO-APIC-edge rtc0 9: 47 49 IO-APIC-fasteoi acpi 12: 1130 1126 IO-APIC-edge i8042 14: 0 0 IO-APIC-edge ata_piix 15: 0 0 IO-APIC-edge ata_piix 16: 5 4 IO-APIC-fasteoi yenta, mmc0, ohci1394 18: 0 0 IO-APIC-fasteoi ath 21: 156 160 IO-APIC-fasteoi HDA Intel 22: 10 14 IO-APIC-fasteoi uhci_hcd:usb3, uhci_hcd:usb4, uhci_hcd:usb5, uhci_hcd:usb6, uhci_hcd:usb7 23: 1 1 IO-APIC-fasteoi ehci_hcd:usb1, ehci_hcd:usb2 26: 4499 4525 PCI-MSI-edge ahci 27: 0 1 PCI-MSI-edge eth0 28: 442 466 PCI-MSI-edge i915@pci:0000:00:02.0 NMI: 0 0 Non-maskable interrupts LOC: 9374 9433 Local timer interrupts RES: 5108 5652 Rescheduling interrupts CAL: 85 72 Function call interrupts TLB: 58 68 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts SPU: 0 0 Spurious interrupts ERR: 0 MIS: 0 # iwlist wlan0 scan wlan0 No scan results # dmesg -c # cat /proc/interrupts CPU0 CPU1 0: 10065 9993 IO-APIC-edge timer 1: 500 468 IO-APIC-edge i8042 8: 69 68 IO-APIC-edge rtc0 9: 48 49 IO-APIC-fasteoi acpi 12: 1917 1899 IO-APIC-edge i8042 14: 0 0 IO-APIC-edge ata_piix 15: 0 0 IO-APIC-edge ata_piix 16: 5 4 IO-APIC-fasteoi yenta, mmc0, ohci1394 18: 13 13 IO-APIC-fasteoi ath 21: 156 160 IO-APIC-fasteoi HDA Intel 22: 10 14 IO-APIC-fasteoi uhci_hcd:usb3, uhci_hcd:usb4, uhci_hcd:usb5, uhci_hcd:usb6, uhci_hcd:usb7 23: 1 1 IO-APIC-fasteoi ehci_hcd:usb1, ehci_hcd:usb2 26: 4510 4530 PCI-MSI-edge ahci 27: 0 1 PCI-MSI-edge eth0 28: 463 487 PCI-MSI-edge i915@pci:0000:00:02.0 NMI: 0 0 Non-maskable interrupts LOC: 9989 9839 Local timer interrupts RES: 5312 5891 Rescheduling interrupts CAL: 86 72 Function call interrupts TLB: 58 68 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts SPU: 0 0 Spurious interrupts ERR: 0 MIS: 0 # iwlist wlan0 scan wlan0 No scan results # cat /proc/interrupts CPU0 CPU1 0: 40632 40714 IO-APIC-edge timer 1: 1677 1605 IO-APIC-edge i8042 8: 69 68 IO-APIC-edge rtc0 9: 49 50 IO-APIC-fasteoi acpi 12: 9450 9342 IO-APIC-edge i8042 14: 0 0 IO-APIC-edge ata_piix 15: 0 0 IO-APIC-edge ata_piix 16: 5 4 IO-APIC-fasteoi yenta, mmc0, ohci1394 18: 26 26 IO-APIC-fasteoi ath 21: 156 160 IO-APIC-fasteoi HDA Intel 22: 10 14 IO-APIC-fasteoi uhci_hcd:usb3, uhci_hcd:usb4, uhci_hcd:usb5, uhci_hcd:usb6, uhci_hcd:usb7 23: 1 1 IO-APIC-fasteoi ehci_hcd:usb1, ehci_hcd:usb2 26: 4679 4683 PCI-MSI-edge ahci 27: 0 1 PCI-MSI-edge eth0 28: 4243 4245 PCI-MSI-edge i915@pci:0000:00:02.0 NMI: 0 0 Non-maskable interrupts LOC: 33604 33406 Local timer interrupts RES: 13860 14361 Rescheduling interrupts CAL: 242 76 Function call interrupts TLB: 68 78 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts SPU: 0 0 Spurious interrupts ERR: 0 MIS: 0