Linux version 2.6.29 (fcelda@a02-0930c) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #2 SMP Sat Mar 28 13:49:03 CET 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
 BIOS-e820: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS)
 BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI present.
last_pfn = 0x140000 max_arch_pfn = 0x1000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 379fe000 @ 7000-d000
ACPI: RSDP 000F7670, 0024 (r2 DELL  )
ACPI: XSDT BFED671C, 0094 (r1 DELL    M08      6040000  LTP        0)
ACPI: FACP BFEDEB60, 00F4 (r3 TOSCPL CRESTLNE  6040000 ALAN        1)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT BFED7C3B, 6EB1 (r2 TOSCPL CRESTLNE  6040000 INTL 20060608)
ACPI: FACS BFEE2FC0, 0040
ACPI: APIC BFEDEC54, 0068 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
ACPI: HPET BFEDECBC, 0038 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
ACPI: MCFG BFEDECF4, 003C (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
ACPI: TCPA BFEDED30, 0032 (r1 Intel  CRESTLNE  6040000 LOHR       5A)
ACPI: TMOR BFEDED62, 0026 (r1 PTLTD            6040000 PTL         3)
ACPI: OSFR BFEDED88, 0072 (r1 TOSHIB A+2nd ID  6040000 TASM  4010000)
ACPI: APIC BFEDEDFA, 0068 (r1 PTLTD  	 APIC    6040000  LTP        0)
ACPI: BOOT BFEDEE62, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
ACPI: SLIC BFEDEE8A, 0176 (r1 DELL    M08      6040000  LTP        0)
ACPI: SSDT BFED798E, 02AD (r1 SataRe SataAhci     1000 INTL 20061109)
ACPI: SSDT BFED6D3C, 025F (r1  PmRef  Cpu0Tst     3000 INTL 20061109)
ACPI: SSDT BFED6C96, 00A6 (r1  PmRef  Cpu1Tst     3000 INTL 20061109)
ACPI: SSDT BFED67B0, 04E6 (r1  PmRef    CpuPm     3000 INTL 20061109)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
ACPI: Local APIC address 0xfee00000
4230MB HIGHMEM available.
889MB LOWMEM available.
  mapped low ram: 0 - 379fe000
  low ram: 00000000 - 379fe000
  bootmap 00009000 - 0000ff40
(8 early reservations) ==> bootmem [0000000000 - 00379fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 00004c3464]    TEXT DATA BSS ==> [0000100000 - 00004c3464]
  #4 [00004c4000 - 00004cb000]    INIT_PG_TABLE ==> [00004c4000 - 00004cb000]
  #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
  #6 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
  #7 [0000009000 - 0000010000]          BOOTMAP ==> [0000009000 - 0000010000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x000379fe
  HighMem  0x000379fe -> 0x00140000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x000bfed0
    0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1048175
free_area_init_node: node 0, pgdat c0414c40, node_mem_map c1000000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3967 pages, LIFO batch:0
  Normal zone: 1748 pages used for memmap
  Normal zone: 221994 pages, LIFO batch:31
  HighMem zone: 8461 pages used for memmap
  HighMem zone: 811973 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Allocating 32768 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1037934
Kernel command line: BOOT_IMAGE=/boot/linux-2.6.29 ro vga=869
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2493.558 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4145976k/5242880k available (2346k kernel code, 45800k reserved, 908k data, 288k init, 3281736k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff9f000 - 0xfffff000   ( 384 kB)
    pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
    vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
      .init : 0xc0433000 - 0xc047b000   ( 288 kB)
      .data : 0xc034a94d - 0xc042daf8   ( 908 kB)
      .text : 0xc0100000 - 0xc034a94d   (2346 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4987.11 BogoMIPS (lpj=9974232)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
[ds] using Core 2/Atom configuration
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20081204
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     T9300  @ 2.50GHz stepping 06
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4987.44 BogoMIPS (lpj=9974883)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
[ds] using Core 2/Atom configuration
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU     T9300  @ 2.50GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (9974.55 BogoMIPS).
net_namespace: 732 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE storm detected, transactions will use polling mode
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8304800-0xf8304bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8300000-0xf8303fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8304c00-0xf8304fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 007f)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af]
pci 0000:00:1f.2: reg 10 io port: [0x18d8-0x18df]
pci 0000:00:1f.2: reg 14 io port: [0x18cc-0x18cf]
pci 0000:00:1f.2: reg 18 io port: [0x18d0-0x18d7]
pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb]
pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xf8304000-0xf83047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xce000000-0xceffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xcc000000-0xcdffffff]
pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xcc000000-0xceffffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xf0000000-0xf3ffffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfa000000-0xfbffffff]
pci 0000:06:00.0: reg 10 64bit mmio: [0xf4000000-0xf4001fff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.3: bridge io port: [0x4000-0x4fff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xf4000000-0xf7ffffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xfc000000-0xfdffffff]
pci 0000:07:00.0: reg 10 io port: [0x5000-0x50ff]
pci 0000:07:00.0: reg 18 64bit mmio: [0xf8410000-0xf8410fff]
pci 0000:07:00.0: reg 20 64bit mmio: [0xf8400000-0xf840ffff]
pci 0000:07:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:00:1c.4: bridge io port: [0x5000-0x5fff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf8400000-0xf84fffff]
pci 0000:08:05.0: reg 10 32bit mmio: [0xf8000000-0xf8000fff]
pci 0000:08:05.0: reg 14 32bit mmio: [0xf8002000-0xf80027ff]
pci 0000:08:05.0: supports D1 D2
pci 0000:08:05.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:05.0: PME# disabled
pci 0000:08:05.2: reg 10 32bit mmio: [0xf8002800-0xf80028ff]
pci 0000:08:05.2: supports D1 D2
pci 0000:08:05.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:05.2: PME# disabled
pci 0000:08:05.3: reg 10 32bit mmio: [0xf8001000-0xf8001fff]
pci 0000:08:05.3: supports D1 D2
pci 0000:08:05.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:05.3: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xf8000000-0xf80fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:06: ioport range 0x680-0x69f has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x1000-0x107f has been reserved
system 00:06: ioport range 0x1180-0x11bf has been reserved
system 00:06: ioport range 0xfe00-0xfe00 has been reserved
system 00:06: ioport range 0xff00-0xff7f has been reserved
pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x2000-0x2fff
pci 0000:00:01.0:   MEM window: 0xcc000000-0xceffffff
pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
pci 0000:00:1c.0:   MEM window: 0xf0000000-0xf3ffffff
pci 0000:00:1c.0:   PREFETCH window: 0x000000fa000000-0x000000fbffffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.3:   IO window: 0x4000-0x4fff
pci 0000:00:1c.3:   MEM window: 0xf4000000-0xf7ffffff
pci 0000:00:1c.3:   PREFETCH window: 0x000000fc000000-0x000000fdffffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07
pci 0000:00:1c.4:   IO window: 0x5000-0x5fff
pci 0000:00:1c.4:   MEM window: 0xc2000000-0xc20fffff
pci 0000:00:1c.4:   PREFETCH window: 0x000000f8400000-0x000000f84fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: 0xf8000000-0xf80fffff
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xcc000000-0xceffffff]
pci_bus 0000:01: resource 2 mem: [0xd0000000-0xdfffffff]
pci_bus 0000:01: resource 3 mem: [0x0-0x0]
pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
pci_bus 0000:02: resource 1 mem: [0xf0000000-0xf3ffffff]
pci_bus 0000:02: resource 2 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
pci_bus 0000:06: resource 0 io:  [0x4000-0x4fff]
pci_bus 0000:06: resource 1 mem: [0xf4000000-0xf7ffffff]
pci_bus 0000:06: resource 2 mem: [0xfc000000-0xfdffffff]
pci_bus 0000:06: resource 3 mem: [0x0-0x0]
pci_bus 0000:07: resource 0 io:  [0x5000-0x5fff]
pci_bus 0000:07: resource 1 mem: [0xc2000000-0xc20fffff]
pci_bus 0000:07: resource 2 mem: [0xf8400000-0xf84fffff]
pci_bus 0000:07: resource 3 mem: [0x0-0x0]
pci_bus 0000:08: resource 0 mem: [0x0-0x0]
pci_bus 0000:08: resource 1 mem: [0xf8000000-0xf80fffff]
pci_bus 0000:08: resource 2 mem: [0x0-0x0]
pci_bus 0000:08: resource 3 io:  [0x00-0xffff]
pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Simple Boot Flag at 0x36 set to 0x1
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1689
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.4: irq 27 for MSI/MSI-X
vesafb: framebuffer at 0xcd000000, mapped to 0xf8280000, using 10125k, total 14336k
vesafb: mode is 1440x900x32, linelength=5760, pages=1
vesafb: protected mode interface info at c000:b3b0
vesafb: pmi: set display start = c00cb413, set palette = c00cb46e
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
Console: switching to colour frame buffer device 180x56
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
ACPI: Sleep Button (CM) [SLPB]
ACPI: SSDT BFED760A, 02BC (r1  PmRef  Cpu0Ist     3000 INTL 20061109)
ACPI: SSDT BFED6F9B, 05EA (r1  PmRef  Cpu0Cst     3001 INTL 20061109)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT BFED78C6, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20061109)
ACPI: SSDT BFED7585, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20061109)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Driver 'sd' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf8304000 port 0xf8304100 irq 28
ata2: SATA max UDMA/133 abar m2048@0xf8304000 port 0xf8304180 irq 28
ata3: SATA max UDMA/133 abar m2048@0xf8304000 port 0xf8304200 irq 28
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ACPI Warning (nspredef-0934): \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer [20081204]
ata1.00: _GTF unexpected object type 0x1
ata1.00: ATA-8: Hitachi HTS722016K9A300, DCDOCA1H, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: _GTF unexpected object type 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS72201 DCDO PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
ata4.00: ATAPI: MATSHITA DVD+/-RW UJ-875S, D200, max UDMA/33
ata4.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM            MATSHITA DVD+-RW UJ-875S  D200 PQ: 0 ANSI: 5
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
Marking TSC unstable due to TSC halts in idle
cpuidle: using governor menu
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Using IPI No-Shortcut mode
Clocksource tsc unstable (delta = -195990721 ns)
registered taskstats version 1
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 288k freed
rtc_cmos 00:07: RTC can wake from S4
acpi device:05: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
nvidia: module license 'NVIDIA' taints kernel.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  180.29  Wed Feb  4 23:44:25 PST 2009
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:07:00.0: setting latency timer to 64
r8169 0000:07:00.0: irq 29 for MSI/MSI-X
eth0: RTL8168c/8111c at 0xf8c8a000, 00:1c:23:58:eb:e1, XID 3c4000c0 IRQ 29
iTCO_vendor_support: vendor-support=0
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
uhci_hcd: USB Universal Host Controller Interface driver
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8304800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
ohci1394 0000:08:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[f8000000-f80007ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8304c00
Driver 'sr' needs updating - please use bus_type methods
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2008 Intel Corporation
iwlagn 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
iwlagn 0000:06:00.0: setting latency timer to 64
usb 6-3: new high speed USB device using ehci_hcd and address 2
sdhci-pci 0000:08:05.2: SDHCI controller found [1217:7120] (rev 2)
sdhci-pci 0000:08:05.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
mmc0: Unknown controller version (2). You may experience problems.
iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
iwlagn: Tunable channels: 11 802.11bg, 13 802.11a channels
iwlagn 0000:06:00.0: PCI INT A disabled
wmaster0 (iwlagn): not using net_device_ops yet
phy0: Selected rate control algorithm 'iwl-agn-rs'
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:08:05.2] using DMA
wlan0 (iwlagn): not using net_device_ops yet
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
usb 6-3: configuration #1 chosen from 1 choice
Linux video capture interface: v2.00
hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
uvcvideo: Found UVC 1.00 device Integrated Webcam (0c45:63e0)
input: Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb6/6-3/6-3:1.0/input/input5
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
usb 4-1: new full speed USB device using uhci_hcd and address 2
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0000c010a000b000]
usb 4-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/input/input6
Adding 4000176k swap on /dev/sda2.  Priority:-1 extents:1 across:4000176k 
generic-usb 0003:046D:C526.0001: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.1/input/input7
generic-usb 0003:046D:C526.0002: input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
EXT3 FS on sda1, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x4b0 offMax=0x21ca
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 2.2.0 (interface 0x000a0009).
vboxnet0 (): not using net_device_ops yet
Bluetooth: Core ver 2.14
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10