nged by ACPI to D0 [60600.552704] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [60600.552714] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [60600.552744] usb usb4: root hub lost power or was reset [60600.552799] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [60600.552809] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [60600.552837] usb usb5: root hub lost power or was reset [60600.552926] ehci_hcd 0000:00:1d.7: PME# disabled [60600.553616] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [60600.553626] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [60600.553636] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [60600.553646] ehci_hcd 0000:00:1d.7: PME# disabled [60600.553679] pci 0000:00:1e.0: setting latency timer to 64 [60600.553693] PIIX_IDE 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [60600.553727] PIIX_IDE 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880005, writing 0x2800005) [60600.553741] PIIX_IDE 0000:00:1f.1: setting latency timer to 64 [60600.553828] ahci 0000:00:1f.2: setting latency timer to 64 [60600.554059] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [60600.554069] e1000e 0000:02:00.0: setting latency timer to 64 [60600.554082] e1000e 0000:02:00.0: PME# disabled [60600.554092] e1000e 0000:02:00.0: PME# disabled [60600.554168] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [60600.769430] nsc-ircc 00:0a: activated [60601.025950] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [60601.026200] hda: UDMA/33 mode selected [60601.384145] usb 5-2: reset full speed USB device using uhci_hcd and address 2 [60601.538242] sd 0:0:0:0: [sda] Starting disk [60602.500163] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [60602.506152] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [60602.506159] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [60602.506164] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [60602.509372] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [60602.509379] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [60602.509384] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [60602.510609] ata1.00: configured for UDMA/100 [60602.524163] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [60602.524168] ata1: irq_stat 0x00400040, connection status changed [60602.527020] ata1.00: configured for UDMA/100 [60602.527029] ata1: EH complete [60602.527132] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [60602.527165] sd 0:0:0:0: [sda] Write Protect is off [60602.527169] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [60602.527218] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [60602.527273] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [60602.527301] sd 0:0:0:0: [sda] Write Protect is off [60602.527305] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [60602.527350] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [60602.556520] pci 0000:00:02.0: power state changed by ACPI to D0 [60602.556660] pci 0000:00:02.0: power state changed by ACPI to D0 [60602.556671] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [60602.556679] pci 0000:00:02.0: setting latency timer to 64 [60602.563802] Restarting tasks ... done. [60963.731999] PM: Syncing filesystems ... done. [60966.766526] Freezing user space processes ... (elapsed 0.00 seconds) done. [60966.767231] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [60966.767525] Suspending console(s) (use no_console_suspend to debug) [60966.768145] pci 0000:00:02.0: PCI INT A disabled [60966.784308] pci 0000:00:02.0: power state changed by ACPI to D3 [60966.785185] sd 0:0:0:0: [sda] Synchronizing SCSI cache [60966.801016] sd 0:0:0:0: [sda] Stopping disk [60968.004616] nsc-ircc 00:0a: disabled [60968.097405] e1000e 0000:02:00.0: PME# enabled [60968.097417] e1000e 0000:02:00.0: PME# enabled [60968.097432] e1000e 0000:02:00.0: PCI INT A disabled [60968.097446] ACPI handle has no context! [60968.144197] PIIX_IDE 0000:00:1f.1: PCI INT C disabled [60968.144313] ehci_hcd 0000:00:1d.7: PCI INT D disabled [60968.144373] ehci_hcd 0000:00:1d.7: PME# disabled [60968.160984] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [60968.161005] uhci_hcd 0000:00:1d.3: PCI INT D disabled [60968.161052] uhci_hcd 0000:00:1d.2: PCI INT C disabled [60968.161098] uhci_hcd 0000:00:1d.1: PCI INT B disabled [60968.161144] uhci_hcd 0000:00:1d.0: PCI INT A disabled [60968.161447] HDA Intel 0000:00:1b.0: PCI INT B disabled [60968.180769] ACPI: Preparing to enter system sleep state S3 [60968.198936] Disabling non-boot CPUs ... [60968.201131] CPU 1 is now offline [60968.201134] SMP alternatives: switching to UP code [60968.543422] CPU0 attaching NULL sched-domain. [60968.543427] CPU1 attaching NULL sched-domain. [60968.543438] CPU0 attaching NULL sched-domain. [60968.543713] CPU1 is down [60968.543844] Extended CMOS year: 2000 [60968.543844] Intel machine check architecture supported. [60968.543844] Intel machine check reporting enabled on CPU#0. [60968.543844] Back to C! [60968.543844] Extended CMOS year: 2000 [60968.543844] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900003) [60968.543844] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [60968.543844] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x180107, writing 0x100507) [60968.543844] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [60968.543844] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [60968.543844] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040b) [60968.543844] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xe421e421) [60968.543844] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xebf0ea00) [60968.543844] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x8070) [60968.543844] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [60968.543844] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [60968.543844] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [60968.543844] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [60968.543844] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [60968.543844] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [60968.543844] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [60968.543844] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007) [60968.543844] PIIX_IDE 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880005, writing 0x2800005) [60968.543844] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [60968.543844] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010b) [60968.543844] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xe (was 0x0, writing 0x94fc) [60968.543844] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xd (was 0x0, writing 0x9400) [60968.543844] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xc (was 0x0, writing 0x90fc) [60968.543844] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xb (was 0x0, writing 0x9000) [60968.543844] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xa (was 0x0, writing 0x73fff000) [60968.543844] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x9 (was 0x0, writing 0x70000000) [60968.543844] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x8 (was 0x0, writing 0xe3fff000) [60968.543844] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x7 (was 0x0, writing 0xe0000000) [60968.543844] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0171615) [60968.543844] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xe4300000) [60968.543844] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a808) [60968.543844] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [60968.545506] Enabling non-boot CPUs ... [60968.545848] SMP alternatives: switching to SMP code [60968.846393] Booting processor 1 APIC 0x1 ip 0x6000 [60968.543126] Initializing CPU#1 [60968.543126] Calibrating delay using timer specific routine.. 3657.64 BogoMIPS (lpj=7315287) [60968.543126] CPU: L1 I cache: 32K, L1 D cache: 32K [60968.543126] CPU: L2 cache: 2048K [60968.543126] CPU: Physical Processor ID: 0 [60968.543126] CPU: Processor Core ID: 1 [60968.543126] Intel machine check architecture supported. [60968.543126] Intel machine check reporting enabled on CPU#1. [60968.936770] CPU1: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [60968.936853] CPU0 attaching NULL sched-domain. [60968.937022] Switched to high resolution mode on CPU 1 [60968.948537] CPU0 attaching sched-domain: [60968.948541] domain 0: span 0-1 level MC [60968.948545] groups: 0 1 [60968.948553] CPU1 attaching sched-domain: [60968.948557] domain 0: span 0-1 level MC [60968.948560] groups: 1 0 [60968.953029] CPU1 is up [60968.953033] ACPI: Waking up from system sleep state S3 [60968.996762] ACPI: EC: non-query interrupt received, switching to interrupt mode [60969.072815] pci 0000:00:02.0: PME# disabled [60969.072824] pci 0000:00:02.1: PME# disabled [60969.072901] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [60969.072911] HDA Intel 0000:00:1b.0: setting latency timer to 64 [60969.072944] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [60969.072957] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [60969.072970] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [60969.072983] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [60969.073722] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [60969.073731] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [60969.073740] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [60969.073771] usb usb2: root hub lost power or was reset [60969.073828] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [60969.073837] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [60969.073866] usb usb3: root hub lost power or was reset [60969.074426] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [60969.074434] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [60969.074444] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [60969.074473] usb usb4: root hub lost power or was reset [60969.074529] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [60969.074538] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [60969.074568] usb usb5: root hub lost power or was reset [60969.074656] ehci_hcd 0000:00:1d.7: PME# disabled [60969.075384] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [60969.075394] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [60969.075404] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [60969.075415] ehci_hcd 0000:00:1d.7: PME# disabled [60969.075449] pci 0000:00:1e.0: setting latency timer to 64 [60969.075462] PIIX_IDE 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [60969.075496] PIIX_IDE 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880005, writing 0x2800005) [60969.075510] PIIX_IDE 0000:00:1f.1: setting latency timer to 64 [60969.075597] ahci 0000:00:1f.2: setting latency timer to 64 [60969.075829] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [60969.075839] e1000e 0000:02:00.0: setting latency timer to 64 [60969.075852] e1000e 0000:02:00.0: PME# disabled [60969.075862] e1000e 0000:02:00.0: PME# disabled [60969.075938] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [60969.289431] nsc-ircc 00:0a: activated [60969.545956] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [60969.546174] hda: UDMA/33 mode selected [60969.904144] usb 5-2: reset full speed USB device using uhci_hcd and address 2 [60970.058241] sd 0:0:0:0: [sda] Starting disk [60971.076160] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [60971.080125] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [60971.080131] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [60971.080137] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [60971.083303] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [60971.083309] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [60971.083314] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [60971.084584] ata1.00: configured for UDMA/100 [60971.100159] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [60971.100165] ata1: irq_stat 0x00400040, connection status changed [60971.102977] ata1.00: configured for UDMA/100 [60971.102986] ata1: EH complete [60971.103090] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [60971.103124] sd 0:0:0:0: [sda] Write Protect is off [60971.103128] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [60971.103177] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [60971.103233] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [60971.103261] sd 0:0:0:0: [sda] Write Protect is off [60971.103265] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [60971.103311] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [60971.130643] pci 0000:00:02.0: power state changed by ACPI to D0 [60971.130782] pci 0000:00:02.0: power state changed by ACPI to D0 [60971.130793] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [60971.130802] pci 0000:00:02.0: setting latency timer to 64 [60971.137945] Restarting tasks ... done. [61074.993959] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [61074.994293] iwl3945 0000:03:00.0: irq 30 for MSI/MSI-X [61075.054581] Registered led device: iwl-phy0:radio [61075.054665] Registered led device: iwl-phy0:assoc [61075.054703] Registered led device: iwl-phy0:RX [61075.054739] Registered led device: iwl-phy0:TX [61075.069508] ADDRCONF(NETDEV_UP): wlan0: link is not ready [61076.999791] wlan0: authenticate with AP 00:18:3a:95:d2:72 [61077.001806] wlan0: authenticated [61077.001811] wlan0: associate with AP 00:18:3a:95:d2:72 [61077.004276] wlan0: RX AssocResp from 00:18:3a:95:d2:72 (capab=0x1 status=0 aid=1) [61077.004283] wlan0: associated [61077.005883] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [61087.664127] wlan0: no IPv6 routers present [61315.008146] wlan0: No ProbeResp from current AP 00:18:3a:95:d2:72 - assume out of range [61633.422183] iwl3945 0000:03:00.0: PCI INT A disabled [61636.030881] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [61636.031040] iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) [61636.031229] iwl3945 0000:03:00.0: irq 30 for MSI/MSI-X [61636.074103] Registered led device: iwl-phy0:radio [61636.074191] Registered led device: iwl-phy0:assoc [61636.074228] Registered led device: iwl-phy0:RX [61636.074266] Registered led device: iwl-phy0:TX [61636.088620] ADDRCONF(NETDEV_UP): wlan0: link is not ready [61645.248671] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 1 [61645.250910] wlan0 direct probe responded [61645.250917] wlan0: authenticate with AP 00:18:3a:95:d2:72 [61645.252921] wlan0: authenticated [61645.252927] wlan0: associate with AP 00:18:3a:95:d2:72 [61645.256488] wlan0: RX AssocResp from 00:18:3a:95:d2:72 (capab=0x1 status=0 aid=1) [61645.256494] wlan0: associated [61645.258425] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [61655.556125] wlan0: no IPv6 routers present [61950.179275] PM: Syncing filesystems ... done. [61950.240919] Freezing user space processes ... (elapsed 0.00 seconds) done. [61950.241657] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [61950.241952] Suspending console(s) (use no_console_suspend to debug) [61950.242554] pci 0000:00:02.0: PCI INT A disabled [61950.256294] pci 0000:00:02.0: power state changed by ACPI to D3 [61950.257163] sd 0:0:0:0: [sda] Synchronizing SCSI cache [61950.257399] sd 0:0:0:0: [sda] Stopping disk [61951.456676] nsc-ircc 00:0a: disabled [61951.458257] iwl3945 0000:03:00.0: PCI INT A disabled [61951.473037] e1000e 0000:02:00.0: PME# enabled [61951.473049] e1000e 0000:02:00.0: PME# enabled [61951.473063] e1000e 0000:02:00.0: PCI INT A disabled [61951.473077] ACPI handle has no context! [61951.520196] PIIX_IDE 0000:00:1f.1: PCI INT C disabled [61951.520314] ehci_hcd 0000:00:1d.7: PCI INT D disabled [61951.520374] ehci_hcd 0000:00:1d.7: PME# disabled [61951.536911] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [61951.536935] uhci_hcd 0000:00:1d.3: PCI INT D disabled [61951.536983] uhci_hcd 0000:00:1d.2: PCI INT C disabled [61951.537029] uhci_hcd 0000:00:1d.1: PCI INT B disabled [61951.537075] uhci_hcd 0000:00:1d.0: PCI INT A disabled [61951.537379] HDA Intel 0000:00:1b.0: PCI INT B disabled [61951.556867] ACPI: Preparing to enter system sleep state S3 [61951.574235] Disabling non-boot CPUs ... [61951.576428] CPU 1 is now offline [61951.576431] SMP alternatives: switching to UP code [61951.894811] CPU0 attaching NULL sched-domain. [61951.894818] CPU1 attaching NULL sched-domain. [61951.894828] CPU0 attaching NULL sched-domain. [61951.895099] CPU1 is down [61951.895229] Extended CMOS year: 2000 [61951.895229] Intel machine check architecture supported. [61951.895229] Intel machine check reporting enabled on CPU#0. [61951.895229] Back to C! [61951.895229] Extended CMOS year: 2000 [61951.895229] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900003) [61951.895229] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [61951.895229] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x180107, writing 0x100507) [61951.895229] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [61951.895229] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [61951.895229] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040b) [61951.895229] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xe421e421) [61951.895229] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xebf0ea00) [61951.895229] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x20008070) [61951.895229] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [61951.895229] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [61951.895229] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [61951.895229] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [61951.895229] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [61951.895229] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [61951.895229] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [61951.895229] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007) [61951.895229] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [61951.895229] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010b) [61951.895229] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xe (was 0x0, writing 0x94fc) [61951.895229] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xd (was 0x0, writing 0x9400) [61951.895229] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xc (was 0x0, writing 0x90fc) [61951.895229] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xb (was 0x0, writing 0x9000) [61951.895229] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xa (was 0x0, writing 0x73fff000) [61951.895229] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x9 (was 0x0, writing 0x70000000) [61951.895229] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x8 (was 0x0, writing 0xe3fff000) [61951.895229] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x7 (was 0x0, writing 0xe0000000) [61951.895229] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0171615) [61951.895229] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xe4300000) [61951.895229] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a808) [61951.895229] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [61951.896883] Enabling non-boot CPUs ... [61951.897223] SMP alternatives: switching to SMP code [61952.229111] Booting processor 1 APIC 0x1 ip 0x6000 [61951.894566] Initializing CPU#1 [61951.894566] Calibrating delay using timer specific routine.. 3657.62 BogoMIPS (lpj=7315254) [61951.894566] CPU: L1 I cache: 32K, L1 D cache: 32K [61951.894566] CPU: L2 cache: 2048K [61951.894566] CPU: Physical Processor ID: 0 [61951.894566] CPU: Processor Core ID: 1 [61951.894566] Intel machine check architecture supported. [61951.894566] Intel machine check reporting enabled on CPU#1. [61952.320780] CPU1: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [61952.320869] CPU0 attaching NULL sched-domain. [61952.321021] Switched to high resolution mode on CPU 1 [61952.332537] CPU0 attaching sched-domain: [61952.332542] domain 0: span 0-1 level MC [61952.332546] groups: 0 1 [61952.332553] CPU1 attaching sched-domain: [61952.332557] domain 0: span 0-1 level MC [61952.332560] groups: 1 0 [61952.337028] CPU1 is up [61952.337032] ACPI: Waking up from system sleep state S3 [61952.382095] ACPI: EC: non-query interrupt received, switching to interrupt mode [61952.458426] pci 0000:00:02.0: PME# disabled [61952.458436] pci 0000:00:02.1: PME# disabled [61952.458513] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [61952.458523] HDA Intel 0000:00:1b.0: setting latency timer to 64 [61952.458556] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [61952.458569] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [61952.458582] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [61952.458595] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [61952.459353] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [61952.459361] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [61952.459371] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [61952.459402] usb usb2: root hub lost power or was reset [61952.459459] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [61952.459469] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [61952.459498] usb usb3: root hub lost power or was reset [61952.460249] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [61952.460257] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [61952.460267] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [61952.460296] usb usb4: root hub lost power or was reset [61952.460352] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [61952.460361] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [61952.460390] usb usb5: root hub lost power or was reset [61952.460479] ehci_hcd 0000:00:1d.7: PME# disabled [61952.461184] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [61952.461195] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [61952.461205] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [61952.461215] ehci_hcd 0000:00:1d.7: PME# disabled [61952.461248] pci 0000:00:1e.0: setting latency timer to 64 [61952.461262] PIIX_IDE 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [61952.461301] PIIX_IDE 0000:00:1f.1: setting latency timer to 64 [61952.461388] ahci 0000:00:1f.2: setting latency timer to 64 [61952.461618] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [61952.461629] e1000e 0000:02:00.0: setting latency timer to 64 [61952.461642] e1000e 0000:02:00.0: PME# disabled [61952.461651] e1000e 0000:02:00.0: PME# disabled [61952.461727] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [61952.519396] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [61952.519727] iwl3945 0000:03:00.0: irq 30 for MSI/MSI-X [61952.578654] Registered led device: iwl-phy0:radio [61952.578733] Registered led device: iwl-phy0:assoc [61952.578769] Registered led device: iwl-phy0:RX [61952.578805] Registered led device: iwl-phy0:TX [61952.681420] nsc-ircc 00:0a: activated [61952.938131] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [61952.939177] hda: UDMA/33 mode selected [61953.300150] usb 5-2: reset full speed USB device using uhci_hcd and address 2 [61953.453240] sd 0:0:0:0: [sda] Starting disk [61953.960160] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [61953.964908] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [61953.964914] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [61953.964920] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [61953.968123] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [61953.968129] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [61953.968135] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [61953.969361] ata1.00: configured for UDMA/100 [61953.984160] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [61953.984165] ata1: irq_stat 0x00400040, connection status changed [61953.986979] ata1.00: configured for UDMA/100 [61953.986988] ata1: EH complete [61953.987092] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [61953.987125] sd 0:0:0:0: [sda] Write Protect is off [61953.987130] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [61953.987178] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [61953.987234] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [61953.987263] sd 0:0:0:0: [sda] Write Protect is off [61953.987267] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [61953.987313] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [61954.015290] pci 0000:00:02.0: power state changed by ACPI to D0 [61954.015429] pci 0000:00:02.0: power state changed by ACPI to D0 [61954.015440] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [61954.015449] pci 0000:00:02.0: setting latency timer to 64 [61954.022968] Restarting tasks ... done. [65316.135667] PM: Syncing filesystems ... done. [65316.925563] Freezing user space processes ... (elapsed 0.00 seconds) done. [65316.926257] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [65316.926564] Suspending console(s) (use no_console_suspend to debug) [65316.927166] pci 0000:00:02.0: PCI INT A disabled [65316.941299] pci 0000:00:02.0: power state changed by ACPI to D3 [65316.942159] sd 0:0:0:0: [sda] Synchronizing SCSI cache [65316.942404] sd 0:0:0:0: [sda] Stopping disk [65318.144618] nsc-ircc 00:0a: disabled [65318.146208] iwl3945 0000:03:00.0: PCI INT A disabled [65318.161031] e1000e 0000:02:00.0: PME# enabled [65318.161042] e1000e 0000:02:00.0: PME# enabled [65318.161057] e1000e 0000:02:00.0: PCI INT A disabled [65318.161070] ACPI handle has no context! [65318.208197] PIIX_IDE 0000:00:1f.1: PCI INT C disabled [65318.208315] ehci_hcd 0000:00:1d.7: PCI INT D disabled [65318.208376] ehci_hcd 0000:00:1d.7: PME# disabled [65318.225009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [65318.225032] uhci_hcd 0000:00:1d.3: PCI INT D disabled [65318.225079] uhci_hcd 0000:00:1d.2: PCI INT C disabled [65318.225125] uhci_hcd 0000:00:1d.1: PCI INT B disabled [65318.225171] uhci_hcd 0000:00:1d.0: PCI INT A disabled [65318.225473] HDA Intel 0000:00:1b.0: PCI INT B disabled [65318.244866] ACPI: Preparing to enter system sleep state S3 [65318.263767] Disabling non-boot CPUs ... [65318.265960] CPU 1 is now offline [65318.265963] SMP alternatives: switching to UP code [65318.561258] CPU0 attaching NULL sched-domain. [65318.561263] CPU1 attaching NULL sched-domain. [65318.561275] CPU0 attaching NULL sched-domain. [65318.561544] CPU1 is down [65318.561675] Extended CMOS year: 2000 [65318.561675] Intel machine check architecture supported. [65318.561675] Intel machine check reporting enabled on CPU#0. [65318.561675] Back to C! [65318.561675] Extended CMOS year: 2000 [65318.561675] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900003) [65318.561675] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [65318.561675] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x180107, writing 0x100507) [65318.561675] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [65318.561675] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [65318.561675] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040b) [65318.561675] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xe421e421) [65318.561675] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xebf0ea00) [65318.561675] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x8070) [65318.561675] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [65318.561675] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [65318.561675] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [65318.561675] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [65318.561675] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [65318.561675] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [65318.561675] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [65318.561675] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007) [65318.561675] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [65318.561675] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010b) [65318.561675] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xe (was 0x0, writing 0x94fc) [65318.561675] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xd (was 0x0, writing 0x9400) [65318.561675] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xc (was 0x0, writing 0x90fc) [65318.561675] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xb (was 0x0, writing 0x9000) [65318.561675] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xa (was 0x0, writing 0x73fff000) [65318.561675] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x9 (was 0x0, writing 0x70000000) [65318.561675] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x8 (was 0x0, writing 0xe3fff000) [65318.561675] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x7 (was 0x0, writing 0xe0000000) [65318.561675] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0171615) [65318.561675] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xe4300000) [65318.561675] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a808) [65318.561675] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [65318.561675] Enabling non-boot CPUs ... [65318.561675] SMP alternatives: switching to SMP code [65318.914650] Booting processor 1 APIC 0x1 ip 0x6000 [65318.561014] Initializing CPU#1 [65318.561014] Calibrating delay using timer specific routine.. 3657.71 BogoMIPS (lpj=7315426) [65318.561014] CPU: L1 I cache: 32K, L1 D cache: 32K [65318.561014] CPU: L2 cache: 2048K [65318.561014] CPU: Physical Processor ID: 0 [65318.561014] CPU: Processor Core ID: 1 [65318.561014] Intel machine check architecture supported. [65318.561014] Intel machine check reporting enabled on CPU#1. [65319.004735] CPU1: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [65319.004819] CPU0 attaching NULL sched-domain. [65319.005021] Switched to high resolution mode on CPU 1 [65319.017023] CPU0 attaching sched-domain: [65319.017028] domain 0: span 0-1 level MC [65319.017032] groups: 0 1 [65319.017039] CPU1 attaching sched-domain: [65319.017043] domain 0: span 0-1 level MC [65319.017046] groups: 1 0 [65319.021029] CPU1 is up [65319.021033] ACPI: Waking up from system sleep state S3 [65319.066980] ACPI: EC: non-query interrupt received, switching to interrupt mode [65319.142602] pci 0000:00:02.0: PME# disabled [65319.142612] pci 0000:00:02.1: PME# disabled [65319.142688] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [65319.142699] HDA Intel 0000:00:1b.0: setting latency timer to 64 [65319.142732] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [65319.142746] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [65319.142759] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [65319.142771] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [65319.143628] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [65319.143636] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [65319.143646] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [65319.143677] usb usb2: root hub lost power or was reset [65319.143735] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [65319.143744] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [65319.143774] usb usb3: root hub lost power or was reset [65319.144350] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [65319.144358] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [65319.144368] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [65319.144397] usb usb4: root hub lost power or was reset [65319.144453] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [65319.144462] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [65319.144491] usb usb5: root hub lost power or was reset [65319.144580] ehci_hcd 0000:00:1d.7: PME# disabled [65319.145214] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [65319.145225] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [65319.145235] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [65319.145245] ehci_hcd 0000:00:1d.7: PME# disabled [65319.145278] pci 0000:00:1e.0: setting latency timer to 64 [65319.145292] PIIX_IDE 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [65319.145331] PIIX_IDE 0000:00:1f.1: setting latency timer to 64 [65319.145419] ahci 0000:00:1f.2: setting latency timer to 64 [65319.145650] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [65319.145661] e1000e 0000:02:00.0: setting latency timer to 64 [65319.145674] e1000e 0000:02:00.0: PME# disabled [65319.145684] e1000e 0000:02:00.0: PME# disabled [65319.145760] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [65319.207409] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [65319.207740] iwl3945 0000:03:00.0: irq 30 for MSI/MSI-X [65319.267617] Registered led device: iwl-phy0:radio [65319.267695] Registered led device: iwl-phy0:assoc [65319.267732] Registered led device: iwl-phy0:RX [65319.267769] Registered led device: iwl-phy0:TX [65319.369423] nsc-ircc 00:0a: activated [65319.625912] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [65319.626169] hda: UDMA/33 mode selected [65319.984155] usb 5-2: reset full speed USB device using uhci_hcd and address 2 [65320.137239] sd 0:0:0:0: [sda] Starting disk [65321.148159] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [65321.156435] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [65321.156442] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [65321.156447] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [65321.159649] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [65321.159655] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [65321.159660] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [65321.160931] ata1.00: configured for UDMA/100 [65321.176162] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [65321.176168] ata1: irq_stat 0x00400040, connection status changed [65321.179020] ata1.00: configured for UDMA/100 [65321.179029] ata1: EH complete [65321.179134] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [65321.179167] sd 0:0:0:0: [sda] Write Protect is off [65321.179172] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [65321.179219] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [65321.179275] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [65321.179304] sd 0:0:0:0: [sda] Write Protect is off [65321.179308] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [65321.179354] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [65321.207200] pci 0000:00:02.0: power state changed by ACPI to D0 [65321.207340] pci 0000:00:02.0: power state changed by ACPI to D0 [65321.207351] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [65321.207359] pci 0000:00:02.0: setting latency timer to 64 [65321.214886] Restarting tasks ... done. [65321.278588] wlan0: deauthenticated (Reason: 7) [65322.276149] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 1 [65322.278357] wlan0 direct probe responded [65322.278364] wlan0: authenticate with AP 00:18:3a:95:d2:72 [65322.280583] wlan0: authenticated [65322.280590] wlan0: associate with AP 00:18:3a:95:d2:72 [65322.283009] wlan0: RX ReassocResp from 00:18:3a:95:d2:72 (capab=0x1 status=0 aid=1) [65322.283015] wlan0: associated [65350.902612] PM: Syncing filesystems ... done. [65351.690336] Freezing user space processes ... (elapsed 0.00 seconds) done. [65351.691077] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [65351.691365] Suspending console(s) (use no_console_suspend to debug) [65351.691967] pci 0000:00:02.0: PCI INT A disabled [65351.704289] pci 0000:00:02.0: power state changed by ACPI to D3 [65351.705139] sd 0:0:0:0: [sda] Synchronizing SCSI cache [65351.705382] sd 0:0:0:0: [sda] Stopping disk [65352.912577] nsc-ircc 00:0a: disabled [65352.914157] iwl3945 0000:03:00.0: PCI INT A disabled [65352.929038] e1000e 0000:02:00.0: PME# enabled [65352.929050] e1000e 0000:02:00.0: PME# enabled [65352.929064] e1000e 0000:02:00.0: PCI INT A disabled [65352.929077] ACPI handle has no context! [65352.976195] PIIX_IDE 0000:00:1f.1: PCI INT C disabled [65352.976311] ehci_hcd 0000:00:1d.7: PCI INT D disabled [65352.976371] ehci_hcd 0000:00:1d.7: PME# disabled [65352.993028] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [65352.993052] uhci_hcd 0000:00:1d.3: PCI INT D disabled [65352.993099] uhci_hcd 0000:00:1d.2: PCI INT C disabled [65352.993145] uhci_hcd 0000:00:1d.1: PCI INT B disabled [65352.993190] uhci_hcd 0000:00:1d.0: PCI INT A disabled [65352.993494] HDA Intel 0000:00:1b.0: PCI INT B disabled [65353.012869] ACPI: Preparing to enter system sleep state S3 [65353.030535] Disabling non-boot CPUs ... [65353.032728] CPU 1 is now offline [65353.032732] SMP alternatives: switching to UP code [65353.317952] CPU0 attaching NULL sched-domain. [65353.317958] CPU1 attaching NULL sched-domain. [65353.317969] CPU0 attaching NULL sched-domain. [65353.318243] CPU1 is down [65353.318370] Extended CMOS year: 2000 [65353.318370] Intel machine check architecture supported. [65353.318370] Intel machine check reporting enabled on CPU#0. [65353.318370] Back to C! [65353.318370] Extended CMOS year: 2000 [65353.318370] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900003) [65353.318370] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [65353.318370] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x180107, writing 0x100507) [65353.318370] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [65353.318370] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [65353.318370] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040b) [65353.318370] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xe421e421) [65353.318370] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xebf0ea00) [65353.318370] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x20008070) [65353.318370] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [65353.318370] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [65353.318370] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [65353.318370] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [65353.318370] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [65353.318370] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [65353.318370] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [65353.318370] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007) [65353.318370] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [65353.318370] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010b) [65353.318370] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xe (was 0x0, writing 0x94fc) [65353.318370] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xd (was 0x0, writing 0x9400) [65353.318370] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xc (was 0x0, writing 0x90fc) [65353.318370] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xb (was 0x0, writing 0x9000) [65353.318370] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xa (was 0x0, writing 0x73fff000) [65353.318370] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x9 (was 0x0, writing 0x70000000) [65353.318370] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x8 (was 0x0, writing 0xe3fff000) [65353.318370] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x7 (was 0x0, writing 0xe0000000) [65353.318370] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0171615) [65353.318370] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xe4300000) [65353.318370] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a808) [65353.318370] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [65353.320030] Enabling non-boot CPUs ... [65353.320374] SMP alternatives: switching to SMP code [65353.647277] Booting processor 1 APIC 0x1 ip 0x6000 [65353.317704] Initializing CPU#1 [65353.317704] Calibrating delay using timer specific routine.. 3657.63 BogoMIPS (lpj=7315268) [65353.317704] CPU: L1 I cache: 32K, L1 D cache: 32K [65353.317704] CPU: L2 cache: 2048K [65353.317704] CPU: Physical Processor ID: 0 [65353.317704] CPU: Processor Core ID: 1 [65353.317704] Intel machine check architecture supported. [65353.317704] Intel machine check reporting enabled on CPU#1. [65353.736764] CPU1: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [65353.736846] CPU0 attaching NULL sched-domain. [65353.737022] Switched to high resolution mode on CPU 1 [65353.752998] CPU0 attaching sched-domain: [65353.753003] domain 0: span 0-1 level MC [65353.753007] groups: 0 1 [65353.753015] CPU1 attaching sched-domain: [65353.753018] domain 0: span 0-1 level MC [65353.753022] groups: 1 0 [65353.756029] CPU1 is up [65353.756033] ACPI: Waking up from system sleep state S3 [65353.802234] ACPI: EC: non-query interrupt received, switching to interrupt mode [65353.876910] pci 0000:00:02.0: PME# disabled [65353.876919] pci 0000:00:02.1: PME# disabled [65353.876996] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [65353.877019] HDA Intel 0000:00:1b.0: setting latency timer to 64 [65353.877052] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [65353.877067] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [65353.877080] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [65353.877092] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [65353.877708] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [65353.877717] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [65353.877727] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [65353.877758] usb usb2: root hub lost power or was reset [65353.877814] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [65353.877824] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [65353.877852] usb usb3: root hub lost power or was reset [65353.878391] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [65353.878399] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [65353.878409] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [65353.878438] usb usb4: root hub lost power or was reset [65353.878494] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [65353.878503] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [65353.878532] usb usb5: root hub lost power or was reset [65353.878621] ehci_hcd 0000:00:1d.7: PME# disabled [65353.879152] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [65353.879162] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [65353.879172] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [65353.879182] ehci_hcd 0000:00:1d.7: PME# disabled [65353.879216] pci 0000:00:1e.0: setting latency timer to 64 [65353.879229] PIIX_IDE 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [65353.879268] PIIX_IDE 0000:00:1f.1: setting latency timer to 64 [65353.879355] ahci 0000:00:1f.2: setting latency timer to 64 [65353.879586] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [65353.879597] e1000e 0000:02:00.0: setting latency timer to 64 [65353.879610] e1000e 0000:02:00.0: PME# disabled [65353.879619] e1000e 0000:02:00.0: PME# disabled [65353.879696] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [65353.939405] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [65353.939736] iwl3945 0000:03:00.0: irq 30 for MSI/MSI-X [65353.998585] Registered led device: iwl-phy0:radio [65353.998663] Registered led device: iwl-phy0:assoc [65353.998698] Registered led device: iwl-phy0:RX [65353.998734] Registered led device: iwl-phy0:TX [65354.101421] nsc-ircc 00:0a: activated [65354.362154] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [65354.362872] hda: UDMA/33 mode selected [65354.720154] usb 5-2: reset full speed USB device using uhci_hcd and address 2 [65354.930254] sd 0:0:0:0: [sda] Starting disk [65355.880162] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [65355.885786] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [65355.885793] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [65355.885798] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [65355.889000] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [65355.889010] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [65355.889016] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [65355.890241] ata1.00: configured for UDMA/100 [65355.904162] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [65355.904167] ata1: irq_stat 0x00400040, connection status changed [65355.906974] ata1.00: configured for UDMA/100 [65355.906983] ata1: EH complete [65355.907087] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [65355.907119] sd 0:0:0:0: [sda] Write Protect is off [65355.907124] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [65355.907173] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [65355.907228] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [65355.907256] sd 0:0:0:0: [sda] Write Protect is off [65355.907260] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [65355.907306] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [65355.936539] pci 0000:00:02.0: power state changed by ACPI to D0 [65355.936679] pci 0000:00:02.0: power state changed by ACPI to D0 [65355.936689] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [65355.936698] pci 0000:00:02.0: setting latency timer to 64 [65355.944228] Restarting tasks ... <7>wlan0: deauthenticated (Reason: 7) [65355.959458] done. [65355.974563] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 1 [65355.976695] wlan0 direct probe responded [65355.976701] wlan0: authenticate with AP 00:18:3a:95:d2:72 [65355.978690] wlan0: authenticated [65355.978694] wlan0: associate with AP 00:18:3a:95:d2:72 [65355.981361] wlan0: RX ReassocResp from 00:18:3a:95:d2:72 (capab=0x1 status=0 aid=2) [65355.981366] wlan0: associated [65416.297532] PM: Syncing filesystems ... done. [65417.512596] Freezing user space processes ... (elapsed 0.04 seconds) done. [65417.553583] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [65417.553869] Suspending console(s) (use no_console_suspend to debug) [65417.554459] pci 0000:00:02.0: PCI INT A disabled [65417.568246] pci 0000:00:02.0: power state changed by ACPI to D3 [65417.569057] sd 0:0:0:0: [sda] Synchronizing SCSI cache [65417.569293] sd 0:0:0:0: [sda] Stopping disk [65419.164689] nsc-ircc 00:0a: disabled [65419.166274] iwl3945 0000:03:00.0: PCI INT A disabled [65419.181037] e1000e 0000:02:00.0: PME# enabled [65419.181049] e1000e 0000:02:00.0: PME# enabled [65419.181063] e1000e 0000:02:00.0: PCI INT A disabled [65419.181076] ACPI handle has no context! [65419.228194] PIIX_IDE 0000:00:1f.1: PCI INT C disabled [65419.228311] ehci_hcd 0000:00:1d.7: PCI INT D disabled [65419.228371] ehci_hcd 0000:00:1d.7: PME# disabled [65419.244870] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [65419.244892] uhci_hcd 0000:00:1d.3: PCI INT D disabled [65419.244938] uhci_hcd 0000:00:1d.2: PCI INT C disabled [65419.244984] uhci_hcd 0000:00:1d.1: PCI INT B disabled [65419.245030] uhci_hcd 0000:00:1d.0: PCI INT A disabled [65419.245334] HDA Intel 0000:00:1b.0: PCI INT B disabled [65419.264467] ACPI: Preparing to enter system sleep state S3 [65419.282132] Disabling non-boot CPUs ... [65419.284327] CPU 1 is now offline [65419.284330] SMP alternatives: switching to UP code [65419.604047] CPU0 attaching NULL sched-domain. [65419.604052] CPU1 attaching NULL sched-domain. [65419.604063] CPU0 attaching NULL sched-domain. [65419.604337] CPU1 is down [65419.604466] Extended CMOS year: 2000 [65419.604466] Intel machine check architecture supported. [65419.604466] Intel machine check reporting enabled on CPU#0. [65419.604466] Back to C! [65419.604466] Extended CMOS year: 2000 [65419.604466] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900003) [65419.604466] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [65419.604466] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x180107, writing 0x100507) [65419.604466] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [65419.604466] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [65419.604466] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040b) [65419.604466] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xe421e421) [65419.604466] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xebf0ea00) [65419.604466] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x8070) [65419.604466] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [65419.604466] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [65419.604466] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [65419.604466] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [65419.604466] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [65419.604466] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [65419.604466] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [65419.604466] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007) [65419.604466] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [65419.604466] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010b) [65419.604466] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xe (was 0x0, writing 0x94fc) [65419.604466] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xd (was 0x0, writing 0x9400) [65419.604466] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xc (was 0x0, writing 0x90fc) [65419.604466] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xb (was 0x0, writing 0x9000) [65419.604466] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xa (was 0x0, writing 0x73fff000) [65419.604466] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x9 (was 0x0, writing 0x70000000) [65419.604466] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x8 (was 0x0, writing 0xe3fff000) [65419.604466] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x7 (was 0x0, writing 0xe0000000) [65419.604466] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0171615) [65419.604466] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xe4300000) [65419.604466] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a808) [65419.604466] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [65419.604466] Enabling non-boot CPUs ... [65419.604466] SMP alternatives: switching to SMP code [65419.907421] Booting processor 1 APIC 0x1 ip 0x6000 [65419.603655] Initializing CPU#1 [65419.603655] Calibrating delay using timer specific routine.. 3657.61 BogoMIPS (lpj=7315237) [65419.603655] CPU: L1 I cache: 32K, L1 D cache: 32K [65419.603655] CPU: L2 cache: 2048K [65419.603655] CPU: Physical Processor ID: 0 [65419.603655] CPU: Processor Core ID: 1 [65419.603655] Intel machine check architecture supported. [65419.603655] Intel machine check reporting enabled on CPU#1. [65419.996713] CPU1: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [65419.996796] CPU0 attaching NULL sched-domain. [65419.997022] Switched to high resolution mode on CPU 1 [65420.008996] CPU0 attaching sched-domain: [65420.009001] domain 0: span 0-1 level MC [65420.009005] groups: 0 1 [65420.009013] CPU1 attaching sched-domain: [65420.009016] domain 0: span 0-1 level MC [65420.009020] groups: 1 0 [65420.013029] CPU1 is up [65420.013033] ACPI: Waking up from system sleep state S3 [65420.057073] ACPI: EC: non-query interrupt received, switching to interrupt mode [65420.131813] pci 0000:00:02.0: PME# disabled [65420.131822] pci 0000:00:02.1: PME# disabled [65420.131900] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [65420.131910] HDA Intel 0000:00:1b.0: setting latency timer to 64 [65420.131942] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [65420.131956] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [65420.131969] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [65420.131982] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [65420.132637] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [65420.132646] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [65420.132656] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [65420.132686] usb usb2: root hub lost power or was reset [65420.132742] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [65420.132752] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [65420.132780] usb usb3: root hub lost power or was reset [65420.133530] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [65420.133538] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [65420.133548] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [65420.133578] usb usb4: root hub lost power or was reset [65420.133633] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [65420.133643] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [65420.133672] usb usb5: root hub lost power or was reset [65420.133760] ehci_hcd 0000:00:1d.7: PME# disabled [65420.134450] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [65420.134460] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [65420.134470] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [65420.134481] ehci_hcd 0000:00:1d.7: PME# disabled [65420.134514] pci 0000:00:1e.0: setting latency timer to 64 [65420.134528] PIIX_IDE 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [65420.134567] PIIX_IDE 0000:00:1f.1: setting latency timer to 64 [65420.134655] ahci 0000:00:1f.2: setting latency timer to 64 [65420.134885] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [65420.134896] e1000e 0000:02:00.0: setting latency timer to 64 [65420.134909] e1000e 0000:02:00.0: PME# disabled [65420.134918] e1000e 0000:02:00.0: PME# disabled [65420.134995] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [65420.195419] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [65420.195750] iwl3945 0000:03:00.0: irq 30 for MSI/MSI-X [65420.254612] Registered led device: iwl-phy0:radio [65420.254691] Registered led device: iwl-phy0:assoc [65420.254726] Registered led device: iwl-phy0:RX [65420.254762] Registered led device: iwl-phy0:TX [65420.357418] nsc-ircc 00:0a: activated [65420.614057] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [65420.614287] hda: UDMA/33 mode selected [65420.972152] usb 5-2: reset full speed USB device using uhci_hcd and address 2 [65421.125244] sd 0:0:0:0: [sda] Starting disk [65422.080158] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [65422.088566] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [65422.088573] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [65422.088579] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [65422.091781] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [65422.091787] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [65422.091793] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [65422.093062] ata1.00: configured for UDMA/100 [65422.108163] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [65422.108168] ata1: irq_stat 0x00400040, connection status changed [65422.110997] ata1.00: configured for UDMA/100 [65422.111006] ata1: EH complete [65422.111110] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [65422.111143] sd 0:0:0:0: [sda] Write Protect is off [65422.111148] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [65422.111196] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [65422.111252] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [65422.111280] sd 0:0:0:0: [sda] Write Protect is off [65422.111284] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [65422.111330] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [65422.138978] pci 0000:00:02.0: power state changed by ACPI to D0 [65422.139118] pci 0000:00:02.0: power state changed by ACPI to D0 [65422.139129] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [65422.139138] pci 0000:00:02.0: setting latency timer to 64 [65422.146662] Restarting tasks ... done. [65422.166717] wlan0: deauthenticated (Reason: 7) [65423.164145] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 1 [65423.166386] wlan0 direct probe responded [65423.166393] wlan0: authenticate with AP 00:18:3a:95:d2:72 [65423.168584] wlan0: authenticated [65423.168592] wlan0: associate with AP 00:18:3a:95:d2:72 [65423.171102] wlan0: RX ReassocResp from 00:18:3a:95:d2:72 (capab=0x1 status=0 aid=1) [65423.171107] wlan0: associated [65981.633664] PM: Syncing filesystems ... done. [65982.434152] Freezing user space processes ... (elapsed 0.00 seconds) done. [65982.434885] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [65982.435176] Suspending console(s) (use no_console_suspend to debug) [65982.435777] pci 0000:00:02.0: PCI INT A disabled [65982.452291] pci 0000:00:02.0: power state changed by ACPI to D3 [65982.453146] sd 0:0:0:0: [sda] Synchronizing SCSI cache [65982.453387] sd 0:0:0:0: [sda] Stopping disk [65983.644781] nsc-ircc 00:0a: disabled [65983.646351] iwl3945 0000:03:00.0: PCI INT A disabled [65983.661035] e1000e 0000:02:00.0: PME# enabled [65983.661047] e1000e 0000:02:00.0: PME# enabled [65983.661061] e1000e 0000:02:00.0: PCI INT A disabled [65983.661074] ACPI handle has no context! [65983.708192] PIIX_IDE 0000:00:1f.1: PCI INT C disabled [65983.708308] ehci_hcd 0000:00:1d.7: PCI INT D disabled [65983.708368] ehci_hcd 0000:00:1d.7: PME# disabled [65983.724984] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [65983.725007] uhci_hcd 0000:00:1d.3: PCI INT D disabled [65983.725055] uhci_hcd 0000:00:1d.2: PCI INT C disabled [65983.725101] uhci_hcd 0000:00:1d.1: PCI INT B disabled [65983.725148] uhci_hcd 0000:00:1d.0: PCI INT A disabled [65983.725453] HDA Intel 0000:00:1b.0: PCI INT B disabled [65983.744768] ACPI: Preparing to enter system sleep state S3 [65983.762831] Disabling non-boot CPUs ... [65983.765026] CPU 1 is now offline [65983.765029] SMP alternatives: switching to UP code [65984.117780] CPU0 attaching NULL sched-domain. [65984.117786] CPU1 attaching NULL sched-domain. [65984.117797] CPU0 attaching NULL sched-domain. [65984.118065] CPU1 is down [65984.118193] Extended CMOS year: 2000 [65984.118193] Intel machine check architecture supported. [65984.118193] Intel machine check reporting enabled on CPU#0. [65984.118193] Back to C! [65984.118193] Extended CMOS year: 2000 [65984.118193] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900003) [65984.118193] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [65984.118193] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x180107, writing 0x100507) [65984.118193] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [65984.118193] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [65984.118193] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040b) [65984.118193] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xe421e421) [65984.118193] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xebf0ea00) [65984.118193] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x20008070) [65984.118193] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [65984.118193] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [65984.118193] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [65984.118193] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [65984.118193] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [65984.118193] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [65984.118193] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [65984.118193] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007) [65984.118193] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [65984.118193] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010b) [65984.118193] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xe (was 0x0, writing 0x94fc) [65984.118193] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xd (was 0x0, writing 0x9400) [65984.118193] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xc (was 0x0, writing 0x90fc) [65984.118193] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xb (was 0x0, writing 0x9000) [65984.118193] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xa (was 0x0, writing 0x73fff000) [65984.118193] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x9 (was 0x0, writing 0x70000000) [65984.118193] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x8 (was 0x0, writing 0xe3fff000) [65984.118193] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x7 (was 0x0, writing 0xe0000000) [65984.118193] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0171615) [65984.118193] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xe4300000) [65984.118193] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a808) [65984.118193] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [65984.118193] Enabling non-boot CPUs ... [65984.120200] SMP alternatives: switching to SMP code [65984.398354] Booting processor 1 APIC 0x1 ip 0x6000 [65984.117526] Initializing CPU#1 [65984.117526] Calibrating delay using timer specific routine.. 3657.62 BogoMIPS (lpj=7315254) [65984.117526] CPU: L1 I cache: 32K, L1 D cache: 32K [65984.117526] CPU: L2 cache: 2048K [65984.117526] CPU: Physical Processor ID: 0 [65984.117526] CPU: Processor Core ID: 1 [65984.117526] Intel machine check architecture supported. [65984.117526] Intel machine check reporting enabled on CPU#1. [65984.488734] CPU1: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [65984.488817] CPU0 attaching NULL sched-domain. [65984.489022] Switched to high resolution mode on CPU 1 [65984.505000] CPU0 attaching sched-domain: [65984.505005] domain 0: span 0-1 level MC [65984.505010] groups: 0 1 [65984.505017] CPU1 attaching sched-domain: [65984.505021] domain 0: span 0-1 level MC [65984.505024] groups: 1 0 [65984.508034] CPU1 is up [65984.508038] ACPI: Waking up from system sleep state S3 [65984.552090] ACPI: EC: non-query interrupt received, switching to interrupt mode [65984.626424] pci 0000:00:02.0: PME# disabled [65984.626434] pci 0000:00:02.1: PME# disabled [65984.626511] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [65984.626521] HDA Intel 0000:00:1b.0: setting latency timer to 64 [65984.626554] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [65984.626568] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [65984.626581] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [65984.626593] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [65984.627406] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [65984.627415] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [65984.627425] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [65984.627456] usb usb2: root hub lost power or was reset [65984.627513] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [65984.627522] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [65984.627551] usb usb3: root hub lost power or was reset [65984.628299] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [65984.628307] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [65984.628317] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [65984.628346] usb usb4: root hub lost power or was reset [65984.628401] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [65984.628411] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [65984.628440] usb usb5: root hub lost power or was reset [65984.628528] ehci_hcd 0000:00:1d.7: PME# disabled [65984.629278] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [65984.629288] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [65984.629298] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [65984.629308] ehci_hcd 0000:00:1d.7: PME# disabled [65984.629342] pci 0000:00:1e.0: setting latency timer to 64 [65984.629356] PIIX_IDE 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [65984.629395] PIIX_IDE 0000:00:1f.1: setting latency timer to 64 [65984.629482] ahci 0000:00:1f.2: setting latency timer to 64 [65984.629712] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [65984.629723] e1000e 0000:02:00.0: setting latency timer to 64 [65984.629736] e1000e 0000:02:00.0: PME# disabled [65984.629745] e1000e 0000:02:00.0: PME# disabled [65984.629821] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [65984.691401] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [65984.691731] iwl3945 0000:03:00.0: irq 30 for MSI/MSI-X [65984.750727] Registered led device: iwl-phy0:radio [65984.750805] Registered led device: iwl-phy0:assoc [65984.750841] Registered led device: iwl-phy0:RX [65984.750877] Registered led device: iwl-phy0:TX [65984.853421] nsc-ircc 00:0a: activated [65985.110066] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [65985.110247] hda: UDMA/33 mode selected [65985.468151] usb 5-2: reset full speed USB device using uhci_hcd and address 2 [65985.621244] sd 0:0:0:0: [sda] Starting disk [65986.688162] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [65986.698784] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [65986.698791] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [65986.698796] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [65986.702060] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [65986.702066] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [65986.702071] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [65986.703311] ata1.00: configured for UDMA/100 [65986.716162] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [65986.716167] ata1: irq_stat 0x00400040, connection status changed [65986.718976] ata1.00: configured for UDMA/100 [65986.718985] ata1: EH complete [65986.719090] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [65986.719123] sd 0:0:0:0: [sda] Write Protect is off [65986.719128] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [65986.719176] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [65986.719231] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [65986.719259] sd 0:0:0:0: [sda] Write Protect is off [65986.719263] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [65986.719309] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [65986.749262] pci 0000:00:02.0: power state changed by ACPI to D0 [65986.749402] pci 0000:00:02.0: power state changed by ACPI to D0 [65986.749413] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [65986.749422] pci 0000:00:02.0: setting latency timer to 64 [65986.756946] Restarting tasks ... done. [65986.779500] wlan0: deauthenticated (Reason: 7) [65987.776147] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 1 [65987.778394] wlan0 direct probe responded [65987.778400] wlan0: authenticate with AP 00:18:3a:95:d2:72 [65987.780575] wlan0: authenticated [65987.780582] wlan0: associate with AP 00:18:3a:95:d2:72 [65987.783260] wlan0: RX ReassocResp from 00:18:3a:95:d2:72 (capab=0x1 status=0 aid=1) [65987.783267] wlan0: associated [67034.955969] PM: Syncing filesystems ... done. [67035.786746] Freezing user space processes ... (elapsed 0.00 seconds) done. [67035.787461] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [67035.787749] Suspending console(s) (use no_console_suspend to debug) [67035.788372] pci 0000:00:02.0: PCI INT A disabled [67035.800289] pci 0000:00:02.0: power state changed by ACPI to D3 [67035.801142] sd 0:0:0:0: [sda] Synchronizing SCSI cache [67035.801383] sd 0:0:0:0: [sda] Stopping disk [67036.992572] nsc-ircc 00:0a: disabled [67036.994152] iwl3945 0000:03:00.0: PCI INT A disabled [67037.009033] e1000e 0000:02:00.0: PME# enabled [67037.009045] e1000e 0000:02:00.0: PME# enabled [67037.009059] e1000e 0000:02:00.0: PCI INT A disabled [67037.009072] ACPI handle has no context! [67037.056191] PIIX_IDE 0000:00:1f.1: PCI INT C disabled [67037.056307] ehci_hcd 0000:00:1d.7: PCI INT D disabled [67037.056367] ehci_hcd 0000:00:1d.7: PME# disabled [67037.073088] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [67037.073110] uhci_hcd 0000:00:1d.3: PCI INT D disabled [67037.073157] uhci_hcd 0000:00:1d.2: PCI INT C disabled [67037.073203] uhci_hcd 0000:00:1d.1: PCI INT B disabled [67037.073249] uhci_hcd 0000:00:1d.0: PCI INT A disabled [67037.073551] HDA Intel 0000:00:1b.0: PCI INT B disabled [67037.092462] ACPI: Preparing to enter system sleep state S3 [67037.110658] Disabling non-boot CPUs ... [67037.112850] CPU 1 is now offline [67037.112854] SMP alternatives: switching to UP code [67037.451721] CPU0 attaching NULL sched-domain. [67037.451728] CPU1 attaching NULL sched-domain. [67037.451739] CPU0 attaching NULL sched-domain. [67037.452030] CPU1 is down [67037.452159] Extended CMOS year: 2000 [67037.452159] Intel machine check architecture supported. [67037.452159] Intel machine check reporting enabled on CPU#0. [67037.452159] Back to C! [67037.452159] Extended CMOS year: 2000 [67037.452159] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900003) [67037.452159] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [67037.452159] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x180107, writing 0x100507) [67037.452159] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [67037.452159] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [67037.452159] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040b) [67037.452159] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xe421e421) [67037.452159] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xebf0ea00) [67037.452159] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x8070) [67037.452159] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [67037.452159] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [67037.452159] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [67037.452159] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [67037.452159] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [67037.452159] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [67037.452159] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [67037.452159] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007) [67037.452159] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [67037.452159] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010b) [67037.452159] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xe (was 0x0, writing 0x94fc) [67037.452159] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xd (was 0x0, writing 0x9400) [67037.452159] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xc (was 0x0, writing 0x90fc) [67037.452159] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xb (was 0x0, writing 0x9000) [67037.452159] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xa (was 0x0, writing 0x73fff000) [67037.452159] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x9 (was 0x0, writing 0x70000000) [67037.452159] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x8 (was 0x0, writing 0xe3fff000) [67037.452159] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x7 (was 0x0, writing 0xe0000000) [67037.452159] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0171615) [67037.452159] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xe4300000) [67037.452159] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a808) [67037.452159] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [67037.452159] Enabling non-boot CPUs ... [67037.452159] SMP alternatives: switching to SMP code [67037.755321] Booting processor 1 APIC 0x1 ip 0x6000 [67037.451482] Initializing CPU#1 [67037.451482] Calibrating delay using timer specific routine.. 3657.63 BogoMIPS (lpj=7315263) [67037.451482] CPU: L1 I cache: 32K, L1 D cache: 32K [67037.451482] CPU: L2 cache: 2048K [67037.451482] CPU: Physical Processor ID: 0 [67037.451482] CPU: Processor Core ID: 1 [67037.451482] Intel machine check architecture supported. [67037.451482] Intel machine check reporting enabled on CPU#1. [67037.844705] CPU1: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [67037.844787] CPU0 attaching NULL sched-domain. [67037.845023] Switched to high resolution mode on CPU 1 [67037.856531] CPU0 attaching sched-domain: [67037.856536] domain 0: span 0-1 level MC [67037.856540] groups: 0 1 [67037.856548] CPU1 attaching sched-domain: [67037.856551] domain 0: span 0-1 level MC [67037.856555] groups: 1 0 [67037.861029] CPU1 is up [67037.861033] ACPI: Waking up from system sleep state S3 [67037.905893] ACPI: EC: non-query interrupt received, switching to interrupt mode [67037.981985] pci 0000:00:02.0: PME# disabled [67037.981995] pci 0000:00:02.1: PME# disabled [67037.982072] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [67037.982083] HDA Intel 0000:00:1b.0: setting latency timer to 64 [67037.982114] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [67037.982128] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [67037.982141] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [67037.982153] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [67037.982838] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [67037.982846] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [67037.982856] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [67037.982887] usb usb2: root hub lost power or was reset [67037.982944] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [67037.982954] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [67037.982982] usb usb3: root hub lost power or was reset [67037.983554] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [67037.983562] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [67037.983571] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [67037.983601] usb usb4: root hub lost power or was reset [67037.983657] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [67037.983666] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [67037.983694] usb usb5: root hub lost power or was reset [67037.983782] ehci_hcd 0000:00:1d.7: PME# disabled [67037.984470] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [67037.984480] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [67037.984490] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [67037.984500] ehci_hcd 0000:00:1d.7: PME# disabled [67037.984533] pci 0000:00:1e.0: setting latency timer to 64 [67037.984547] PIIX_IDE 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [67037.984586] PIIX_IDE 0000:00:1f.1: setting latency timer to 64 [67037.984674] ahci 0000:00:1f.2: setting latency timer to 64 [67037.984905] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [67037.984915] e1000e 0000:02:00.0: setting latency timer to 64 [67037.984928] e1000e 0000:02:00.0: PME# disabled [67037.984938] e1000e 0000:02:00.0: PME# disabled [67037.985023] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [67038.043399] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [67038.043730] iwl3945 0000:03:00.0: irq 30 for MSI/MSI-X [67038.102621] Registered led device: iwl-phy0:radio [67038.102698] Registered led device: iwl-phy0:assoc [67038.102734] Registered led device: iwl-phy0:RX [67038.102771] Registered led device: iwl-phy0:TX [67038.205421] nsc-ircc 00:0a: activated [67038.466115] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [67038.466292] hda: UDMA/33 mode selected [67038.824153] usb 5-2: reset full speed USB device using uhci_hcd and address 2 [67039.034257] sd 0:0:0:0: [sda] Starting disk [67040.040159] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [67040.054662] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [67040.054668] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [67040.054674] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [67040.057876] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [67040.057882] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [67040.057887] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [67040.059113] ata1.00: configured for UDMA/100 [67040.072160] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [67040.072165] ata1: irq_stat 0x00400040, connection status changed [67040.075008] ata1.00: configured for UDMA/100 [67040.075017] ata1: EH complete [67040.075128] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [67040.075162] sd 0:0:0:0: [sda] Write Protect is off [67040.075166] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [67040.075215] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [67040.075270] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [67040.075298] sd 0:0:0:0: [sda] Write Protect is off [67040.075303] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [67040.075348] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [67040.105184] pci 0000:00:02.0: power state changed by ACPI to D0 [67040.105324] pci 0000:00:02.0: power state changed by ACPI to D0 [67040.105335] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [67040.105344] pci 0000:00:02.0: setting latency timer to 64 [67040.112915] Restarting tasks ... done. [67046.476154] usb 1-1: new high speed USB device using ehci_hcd and address 3 [67046.609704] usb 1-1: New USB device found, idVendor=0930, idProduct=a001 [67046.609713] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [67046.609719] usb 1-1: Product: External USB HDD [67046.609723] usb 1-1: Manufacturer: Toshiba [67046.609727] usb 1-1: SerialNumber: 5A3753534635514D53202020 [67046.609903] usb 1-1: configuration #1 chosen from 1 choice [67058.827803] Initializing USB Mass Storage driver... [67058.829065] scsi4 : SCSI emulation for USB Mass Storage devices [67058.829209] usbcore: registered new interface driver usb-storage [67058.829216] USB Mass Storage support registered. [67058.829230] usb-storage: device found at 3 [67058.829234] usb-storage: waiting for device to settle before scanning [67063.828490] usb-storage: device scan complete [67063.829092] scsi 4:0:0:0: Direct-Access Toshiba External USB HDD 1.02 PQ: 0 ANSI: 4 [67063.830859] sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [67063.831810] sd 4:0:0:0: [sdb] Write Protect is off [67063.831818] sd 4:0:0:0: [sdb] Mode Sense: 21 00 00 00 [67063.831823] sd 4:0:0:0: [sdb] Assuming drive cache: write through [67063.833127] sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [67063.833988] sd 4:0:0:0: [sdb] Write Protect is off [67063.833994] sd 4:0:0:0: [sdb] Mode Sense: 21 00 00 00 [67063.833998] sd 4:0:0:0: [sdb] Assuming drive cache: write through [67063.834004] sdb: sdb1 [67064.198294] sd 4:0:0:0: [sdb] Attached SCSI disk [67133.260195] kjournald starting. Commit interval 5 seconds [67133.260903] EXT3 FS on sdb1, internal journal [67133.260917] EXT3-fs: mounted filesystem with ordered data mode. [67811.513717] usb 1-1: USB disconnect, address 3 [68247.880151] PM: Syncing filesystems ... done. [68248.657377] Freezing user space processes ... (elapsed 0.00 seconds) done. [68248.658091] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [68248.658393] Suspending console(s) (use no_console_suspend to debug) [68248.658996] pci 0000:00:02.0: PCI INT A disabled [68248.673304] pci 0000:00:02.0: power state changed by ACPI to D3 [68248.674156] sd 0:0:0:0: [sda] Synchronizing SCSI cache [68248.674403] sd 0:0:0:0: [sda] Stopping disk [68249.864631] nsc-ircc 00:0a: disabled [68249.866170] iwl3945 0000:03:00.0: PCI INT A disabled [68249.881002] e1000e 0000:02:00.0: PME# enabled [68249.881012] e1000e 0000:02:00.0: PME# enabled [68249.881027] e1000e 0000:02:00.0: PCI INT A disabled [68249.881040] ACPI handle has no context! [68249.928193] PIIX_IDE 0000:00:1f.1: PCI INT C disabled [68249.928309] ehci_hcd 0000:00:1d.7: PCI INT D disabled [68249.928370] ehci_hcd 0000:00:1d.7: PME# disabled [68249.944863] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [68249.944886] uhci_hcd 0000:00:1d.3: PCI INT D disabled [68249.944932] uhci_hcd 0000:00:1d.2: PCI INT C disabled [68249.944978] uhci_hcd 0000:00:1d.1: PCI INT B disabled [68249.945024] uhci_hcd 0000:00:1d.0: PCI INT A disabled [68249.945327] HDA Intel 0000:00:1b.0: PCI INT B disabled [68249.964770] ACPI: Preparing to enter system sleep state S3 [68249.983265] Disabling non-boot CPUs ... [68250.088019] CPU 1 is now offline [68250.088024] SMP alternatives: switching to UP code [68250.395407] CPU0 attaching NULL sched-domain. [68250.395413] CPU1 attaching NULL sched-domain. [68250.395424] CPU0 attaching NULL sched-domain. [68250.395661] CPU1 is down [68250.395792] Extended CMOS year: 2000 [68250.395792] Intel machine check architecture supported. [68250.395792] Intel machine check reporting enabled on CPU#0. [68250.395792] Back to C! [68250.395792] Extended CMOS year: 2000 [68250.395792] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900003) [68250.395792] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [68250.395792] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x180107, writing 0x100507) [68250.395792] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [68250.395792] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [68250.395792] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040b) [68250.395792] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xe421e421) [68250.395792] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xebf0ea00) [68250.395792] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x20008070) [68250.395792] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [68250.395792] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [68250.395792] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [68250.395792] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [68250.395792] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [68250.395792] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [68250.395792] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [68250.395792] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007) [68250.395792] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [68250.395792] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010b) [68250.395792] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xe (was 0x0, writing 0x94fc) [68250.395792] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xd (was 0x0, writing 0x9400) [68250.395792] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xc (was 0x0, writing 0x90fc) [68250.395792] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xb (was 0x0, writing 0x9000) [68250.395792] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xa (was 0x0, writing 0x73fff000) [68250.395792] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x9 (was 0x0, writing 0x70000000) [68250.395792] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x8 (was 0x0, writing 0xe3fff000) [68250.395792] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x7 (was 0x0, writing 0xe0000000) [68250.395792] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0171615) [68250.395792] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xe4300000) [68250.395792] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a808) [68250.395792] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [68250.397448] Enabling non-boot CPUs ... [68250.397789] SMP alternatives: switching to SMP code [68250.728738] Booting processor 1 APIC 0x1 ip 0x6000 [68250.395170] Initializing CPU#1 [68250.395170] Calibrating delay using timer specific routine.. 3657.50 BogoMIPS (lpj=7315003) [68250.395170] CPU: L1 I cache: 32K, L1 D cache: 32K [68250.395170] CPU: L2 cache: 2048K [68250.395170] CPU: Physical Processor ID: 0 [68250.395170] CPU: Processor Core ID: 1 [68250.395170] Intel machine check architecture supported. [68250.395170] Intel machine check reporting enabled on CPU#1. [68250.816721] CPU1: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [68250.816803] CPU0 attaching NULL sched-domain. [68250.817022] Switched to high resolution mode on CPU 1 [68250.828542] CPU0 attaching sched-domain: [68250.828547] domain 0: span 0-1 level MC [68250.828551] groups: 0 1 [68250.828559] CPU1 attaching sched-domain: [68250.828562] domain 0: span 0-1 level MC [68250.828566] groups: 1 0 [68250.833028] CPU1 is up [68250.833032] ACPI: Waking up from system sleep state S3 [68250.877439] ACPI: EC: non-query interrupt received, switching to interrupt mode [68250.922906] pci 0000:00:02.0: PME# disabled [68250.922916] pci 0000:00:02.1: PME# disabled [68250.922993] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [68250.923003] HDA Intel 0000:00:1b.0: setting latency timer to 64 [68250.923036] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [68250.923050] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [68250.923062] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [68250.923075] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [68250.923774] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [68250.923782] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [68250.923792] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [68250.923822] usb usb2: root hub lost power or was reset [68250.923879] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [68250.923888] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [68250.923917] usb usb3: root hub lost power or was reset [68250.924452] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [68250.924460] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [68250.924469] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [68250.924499] usb usb4: root hub lost power or was reset [68250.924555] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [68250.924564] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [68250.924594] usb usb5: root hub lost power or was reset [68250.924682] ehci_hcd 0000:00:1d.7: PME# disabled [68250.925204] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [68250.925214] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [68250.925224] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [68250.925234] ehci_hcd 0000:00:1d.7: PME# disabled [68250.925267] pci 0000:00:1e.0: setting latency timer to 64 [68250.925281] PIIX_IDE 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [68250.925320] PIIX_IDE 0000:00:1f.1: setting latency timer to 64 [68250.925407] ahci 0000:00:1f.2: setting latency timer to 64 [68250.925638] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [68250.925649] e1000e 0000:02:00.0: setting latency timer to 64 [68250.925662] e1000e 0000:02:00.0: PME# disabled [68250.925672] e1000e 0000:02:00.0: PME# disabled [68250.925748] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [68250.983409] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [68250.983738] iwl3945 0000:03:00.0: irq 30 for MSI/MSI-X [68251.042751] Registered led device: iwl-phy0:radio [68251.042826] Registered led device: iwl-phy0:assoc [68251.042860] Registered led device: iwl-phy0:RX [68251.042894] Registered led device: iwl-phy0:TX [68251.145414] nsc-ircc 00:0a: activated [68251.401992] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [68251.402233] hda: UDMA/33 mode selected [68251.816155] usb 5-2: reset full speed USB device using uhci_hcd and address 2 [68252.025262] sd 0:0:0:0: [sda] Starting disk [68252.928161] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [68252.934583] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [68252.934590] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [68252.934595] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [68252.937737] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [68252.937743] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [68252.937749] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [68252.938982] ata1.00: configured for UDMA/100 [68252.952161] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [68252.952166] ata1: irq_stat 0x00400040, connection status changed [68252.955031] ata1.00: configured for UDMA/100 [68252.955040] ata1: EH complete [68252.955144] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [68252.955177] sd 0:0:0:0: [sda] Write Protect is off [68252.955182] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [68252.955231] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [68252.955286] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [68252.955314] sd 0:0:0:0: [sda] Write Protect is off [68252.955318] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [68252.955364] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [68252.984885] pci 0000:00:02.0: power state changed by ACPI to D0 [68252.985030] pci 0000:00:02.0: power state changed by ACPI to D0 [68252.985041] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [68252.985053] pci 0000:00:02.0: setting latency timer to 64 [68252.992659] Restarting tasks ... <7>wlan0: deauthenticated (Reason: 7) [68253.000185] done. [68253.009492] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 1 [68253.011641] wlan0 direct probe responded [68253.011647] wlan0: authenticate with AP 00:18:3a:95:d2:72 [68253.015723] wlan0: authenticated [68253.015730] wlan0: associate with AP 00:18:3a:95:d2:72 [68253.018170] wlan0: RX ReassocResp from 00:18:3a:95:d2:72 (capab=0x1 status=0 aid=1) [68253.018176] wlan0: associated [69235.024147] wlan0: No ProbeResp from current AP 00:18:3a:95:d2:72 - assume out of range [70465.135611] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 1 [70465.332111] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 2 [70465.532093] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 3 [70465.732096] wlan0: direct probe to AP 00:18:3a:95:d2:72 timed out [70469.351667] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 1 [70469.548128] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 2 [70469.748182] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 3 [70469.948130] wlan0: direct probe to AP 00:18:3a:95:d2:72 timed out [70473.442091] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 1 [70473.640151] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 2 [70473.840129] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 3 [70474.040127] wlan0: direct probe to AP 00:18:3a:95:d2:72 timed out [70477.620405] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 1 [70477.820148] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 2 [70478.020125] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 3 [70478.220145] wlan0: direct probe to AP 00:18:3a:95:d2:72 timed out [70482.118150] iwl3945 0000:03:00.0: PCI INT A disabled [70483.810502] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [70483.810667] iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) [70483.810866] iwl3945 0000:03:00.0: irq 30 for MSI/MSI-X [70483.854136] Registered led device: iwl-phy0:radio [70483.854218] Registered led device: iwl-phy0:assoc [70483.854254] Registered led device: iwl-phy0:RX [70483.854290] Registered led device: iwl-phy0:TX [70483.865562] ADDRCONF(NETDEV_UP): wlan0: link is not ready [70485.794546] wlan0: authenticate with AP 00:18:3a:95:d2:72 [70485.796544] wlan0: authenticated [70485.796549] wlan0: associate with AP 00:18:3a:95:d2:72 [70485.798903] wlan0: RX AssocResp from 00:18:3a:95:d2:72 (capab=0x1 status=0 aid=1) [70485.798908] wlan0: associated [70485.800945] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [70495.848128] wlan0: no IPv6 routers present [70545.814775] wlan0 direct probe responded [70545.814783] wlan0: authenticate with AP 00:18:3a:95:d2:72 [70545.817284] wlan0: authenticated [70545.817290] wlan0: associate with AP 00:18:3a:95:d2:72 [70545.819735] wlan0: RX ReassocResp from 00:18:3a:95:d2:72 (capab=0x1 status=0 aid=1) [70545.819741] wlan0: associated [104089.908080] wlan0: No ProbeResp from current AP 00:18:3a:95:d2:72 - assume out of range [112522.204541] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 1 [112522.404079] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 2 [112522.604077] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 3 [112522.804076] wlan0: direct probe to AP 00:18:3a:95:d2:72 timed out [112524.426896] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 1 [112524.624078] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 2 [112524.824079] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 3 [112525.024075] wlan0: direct probe to AP 00:18:3a:95:d2:72 timed out [112526.578102] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 1 [112526.776076] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 2 [112526.976074] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 3 [112527.176076] wlan0: direct probe to AP 00:18:3a:95:d2:72 timed out [112528.841207] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 1 [112529.040077] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 2 [112529.240077] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 3 [112529.440074] wlan0: direct probe to AP 00:18:3a:95:d2:72 timed out [112530.528197] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 1 [112530.728076] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 2 [112530.928077] wlan0: direct probe to AP 00:18:3a:95:d2:72 try 3 [112531.128077] wlan0: direct probe to AP 00:18:3a:95:d2:72 timed out [112535.169408] PM: Syncing filesystems ... done. [112535.989241] Freezing user space processes ... (elapsed 0.00 seconds) done. [112535.992159] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [112536.008225] Suspending console(s) (use no_console_suspend to debug) [112536.008830] pci 0000:00:02.0: PCI INT A disabled [112536.020214] pci 0000:00:02.0: power state changed by ACPI to D3 [112536.020998] sd 0:0:0:0: [sda] Synchronizing SCSI cache [112536.021244] sd 0:0:0:0: [sda] Stopping disk [112537.208405] nsc-ircc 00:0a: disabled [112537.209952] iwl3945 0000:03:00.0: PCI INT A disabled [112537.224960] e1000e 0000:02:00.0: PME# enabled [112537.224970] e1000e 0000:02:00.0: PME# enabled [112537.224983] e1000e 0000:02:00.0: PCI INT A disabled [112537.224996] ACPI handle has no context! [112537.272113] PIIX_IDE 0000:00:1f.1: PCI INT C disabled [112537.272227] ehci_hcd 0000:00:1d.7: PCI INT D disabled [112537.272286] ehci_hcd 0000:00:1d.7: PME# disabled [112537.288838] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [112537.288853] uhci_hcd 0000:00:1d.3: PCI INT D disabled [112537.288899] uhci_hcd 0000:00:1d.2: PCI INT C disabled [112537.288944] uhci_hcd 0000:00:1d.1: PCI INT B disabled [112537.288989] uhci_hcd 0000:00:1d.0: PCI INT A disabled [112537.289284] HDA Intel 0000:00:1b.0: PCI INT B disabled [112537.308900] ACPI: Preparing to enter system sleep state S3 [112537.327590] Disabling non-boot CPUs ... [112537.329783] CPU 1 is now offline [112537.329786] SMP alternatives: switching to UP code [112537.597699] CPU0 attaching NULL sched-domain. [112537.597705] CPU1 attaching NULL sched-domain. [112537.597715] CPU0 attaching NULL sched-domain. [112537.598028] CPU1 is down [112537.598157] Extended CMOS year: 2000 [112537.598157] Intel machine check architecture supported. [112537.598157] Intel machine check reporting enabled on CPU#0. [112537.598157] Back to C! [112537.598157] Extended CMOS year: 2000 [112537.598157] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900003) [112537.598157] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [112537.598157] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x180107, writing 0x100507) [112537.598157] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [112537.598157] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [112537.598157] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040b) [112537.598157] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xe421e421) [112537.598157] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xebf0ea00) [112537.598157] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x8070) [112537.598157] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [112537.598157] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [112537.598157] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [112537.598157] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [112537.598157] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [112537.598157] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [112537.598157] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [112537.598157] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007) [112537.598157] PIIX_IDE 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880005, writing 0x2800005) [112537.598157] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [112537.598157] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010b) [112537.598157] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xe (was 0x0, writing 0x94fc) [112537.598157] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xd (was 0x0, writing 0x9400) [112537.598157] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xc (was 0x0, writing 0x90fc) [112537.598157] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xb (was 0x0, writing 0x9000) [112537.598157] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xa (was 0x0, writing 0x73fff000) [112537.598157] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x9 (was 0x0, writing 0x70000000) [112537.598157] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x8 (was 0x0, writing 0xe3fff000) [112537.598157] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x7 (was 0x0, writing 0xe0000000) [112537.598157] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0171615) [112537.598157] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xe4300000) [112537.598157] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a808) [112537.598157] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [112537.598157] Enabling non-boot CPUs ... [112537.600177] SMP alternatives: switching to SMP code [112537.920335] Booting processor 1 APIC 0x1 ip 0x6000 [112537.597424] Initializing CPU#1 [112537.597424] Calibrating delay using timer specific routine.. 3657.55 BogoMIPS (lpj=7315114) [112537.597424] CPU: L1 I cache: 32K, L1 D cache: 32K [112537.597424] CPU: L2 cache: 2048K [112537.597424] CPU: Physical Processor ID: 0 [112537.597424] CPU: Processor Core ID: 1 [112537.597424] Intel machine check architecture supported. [112537.597424] Intel machine check reporting enabled on CPU#1. [112538.008773] CPU1: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [112538.008863] CPU0 attaching NULL sched-domain. [112538.009020] Switched to high resolution mode on CPU 1 [112538.025023] CPU0 attaching sched-domain: [112538.025028] domain 0: span 0-1 level MC [112538.025032] groups: 0 1 [112538.025040] CPU1 attaching sched-domain: [112538.025043] domain 0: span 0-1 level MC [112538.025047] groups: 1 0 [112538.028029] CPU1 is up [112538.028033] ACPI: Waking up from system sleep state S3 [112538.078433] ACPI: EC: non-query interrupt received, switching to interrupt mode [112538.154196] pci 0000:00:02.0: PME# disabled [112538.154205] pci 0000:00:02.1: PME# disabled [112538.154282] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [112538.154293] HDA Intel 0000:00:1b.0: setting latency timer to 64 [112538.154326] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [112538.154340] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [112538.154353] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [112538.154365] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [112538.155129] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [112538.155138] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [112538.155148] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [112538.155178] usb usb2: root hub lost power or was reset [112538.155235] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [112538.155244] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [112538.155274] usb usb3: root hub lost power or was reset [112538.156048] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [112538.156057] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [112538.156067] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [112538.156096] usb usb4: root hub lost power or was reset [112538.156153] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [112538.156163] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [112538.156192] usb usb5: root hub lost power or was reset [112538.156281] ehci_hcd 0000:00:1d.7: PME# disabled [112538.156951] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [112538.156961] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [112538.156971] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [112538.156982] ehci_hcd 0000:00:1d.7: PME# disabled [112538.157024] pci 0000:00:1e.0: setting latency timer to 64 [112538.157039] PIIX_IDE 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [112538.157077] PIIX_IDE 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880005, writing 0x2800005) [112538.157091] PIIX_IDE 0000:00:1f.1: setting latency timer to 64 [112538.157178] ahci 0000:00:1f.2: setting latency timer to 64 [112538.157409] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [112538.157419] e1000e 0000:02:00.0: setting latency timer to 64 [112538.157432] e1000e 0000:02:00.0: PME# disabled [112538.157442] e1000e 0000:02:00.0: PME# disabled [112538.157519] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [112538.215400] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [112538.215732] iwl3945 0000:03:00.0: irq 30 for MSI/MSI-X [112538.275301] Registered led device: iwl-phy0:radio [112538.275383] Registered led device: iwl-phy0:assoc [112538.275420] Registered led device: iwl-phy0:RX [112538.275461] Registered led device: iwl-phy0:TX [112538.377419] nsc-ircc 00:0a: activated [112538.634010] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [112538.635042] hda: UDMA/33 mode selected [112538.996153] usb 5-2: reset full speed USB device using uhci_hcd and address 2 [112539.152246] sd 0:0:0:0: [sda] Starting disk [112540.100160] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [112540.105386] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [112540.105393] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [112540.105398] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [112540.108666] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [112540.108673] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [112540.108678] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [112540.109935] ata1.00: configured for UDMA/100 [112540.124161] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [112540.124166] ata1: irq_stat 0x00400040, connection status changed [112540.126998] ata1.00: configured for UDMA/100 [112540.127007] ata1: EH complete [112540.127110] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [112540.127143] sd 0:0:0:0: [sda] Write Protect is off [112540.127148] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [112540.127197] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [112540.127252] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [112540.127280] sd 0:0:0:0: [sda] Write Protect is off [112540.127285] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [112540.127331] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [112540.155680] pci 0000:00:02.0: power state changed by ACPI to D0 [112540.155820] pci 0000:00:02.0: power state changed by ACPI to D0 [112540.155830] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [112540.155839] pci 0000:00:02.0: setting latency timer to 64 [112540.163477] Restarting tasks ... done. [112878.633451] PM: Syncing filesystems ... done. [112879.446523] Freezing user space processes ... (elapsed 0.00 seconds) done. [112879.447290] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [112879.447583] Suspending console(s) (use no_console_suspend to debug) [112879.448206] pci 0000:00:02.0: PCI INT A disabled [112879.460286] pci 0000:00:02.0: power state changed by ACPI to D3 [112879.461150] sd 0:0:0:0: [sda] Synchronizing SCSI cache [112879.461376] sd 0:0:0:0: [sda] Stopping disk [112880.656725] nsc-ircc 00:0a: disabled [112880.658330] iwl3945 0000:03:00.0: PCI INT A disabled [112880.673032] e1000e 0000:02:00.0: PME# enabled [112880.673044] e1000e 0000:02:00.0: PME# enabled [112880.673060] e1000e 0000:02:00.0: PCI INT A disabled [112880.673073] ACPI handle has no context! [112880.720196] PIIX_IDE 0000:00:1f.1: PCI INT C disabled [112880.720313] ehci_hcd 0000:00:1d.7: PCI INT D disabled [112880.720374] ehci_hcd 0000:00:1d.7: PME# disabled [112880.737169] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [112880.737191] uhci_hcd 0000:00:1d.3: PCI INT D disabled [112880.737239] uhci_hcd 0000:00:1d.2: PCI INT C disabled [112880.737284] uhci_hcd 0000:00:1d.1: PCI INT B disabled [112880.737331] uhci_hcd 0000:00:1d.0: PCI INT A disabled [112880.737636] HDA Intel 0000:00:1b.0: PCI INT B disabled [112880.756968] ACPI: Preparing to enter system sleep state S3 [112880.774222] Disabling non-boot CPUs ... [112880.776416] CPU 1 is now offline [112880.776420] SMP alternatives: switching to UP code [112881.077551] CPU0 attaching NULL sched-domain. [112881.077557] CPU1 attaching NULL sched-domain. [112881.077568] CPU0 attaching NULL sched-domain. [112881.077867] CPU1 is down [112881.077997] Extended CMOS year: 2000 [112881.077997] Intel machine check architecture supported. [112881.077997] Intel machine check reporting enabled on CPU#0. [112881.077997] Back to C! [112881.077997] Extended CMOS year: 2000 [112881.077997] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900003) [112881.077997] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [112881.077997] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x180107, writing 0x100507) [112881.077997] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [112881.077997] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [112881.077997] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040b) [112881.077997] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xe421e421) [112881.077997] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xebf0ea00) [112881.077997] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x20008070) [112881.077997] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [112881.077997] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [112881.077997] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [112881.077997] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [112881.077997] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [112881.077997] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [112881.077997] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [112881.077997] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007) [112881.077997] PIIX_IDE 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880005, writing 0x2800005) [112881.077997] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [112881.077997] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010b) [112881.077997] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xe (was 0x0, writing 0x94fc) [112881.077997] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xd (was 0x0, writing 0x9400) [112881.077997] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xc (was 0x0, writing 0x90fc) [112881.077997] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xb (was 0x0, writing 0x9000) [112881.077997] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xa (was 0x0, writing 0x73fff000) [112881.077997] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x9 (was 0x0, writing 0x70000000) [112881.077997] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x8 (was 0x0, writing 0xe3fff000) [112881.077997] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x7 (was 0x0, writing 0xe0000000) [112881.077997] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0171615) [112881.077997] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xe4300000) [112881.077997] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a808) [112881.077997] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [112881.077997] Enabling non-boot CPUs ... [112881.077997] SMP alternatives: switching to SMP code [112881.375256] Booting processor 1 APIC 0x1 ip 0x6000 [112881.077285] Initializing CPU#1 [112881.077285] Calibrating delay using timer specific routine.. 3657.66 BogoMIPS (lpj=7315334) [112881.077285] CPU: L1 I cache: 32K, L1 D cache: 32K [112881.077285] CPU: L2 cache: 2048K [112881.077285] CPU: Physical Processor ID: 0 [112881.077285] CPU: Processor Core ID: 1 [112881.077285] Intel machine check architecture supported. [112881.077285] Intel machine check reporting enabled on CPU#1. [112881.464742] CPU1: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [112881.464824] CPU0 attaching NULL sched-domain. [112881.465022] Switched to high resolution mode on CPU 1 [112881.481022] CPU0 attaching sched-domain: [112881.481027] domain 0: span 0-1 level MC [112881.481031] groups: 0 1 [112881.481039] CPU1 attaching sched-domain: [112881.481042] domain 0: span 0-1 level MC [112881.481046] groups: 1 0 [112881.484033] CPU1 is up [112881.484037] ACPI: Waking up from system sleep state S3 [112881.528681] ACPI: EC: non-query interrupt received, switching to interrupt mode [112881.606127] pci 0000:00:02.0: PME# disabled [112881.606137] pci 0000:00:02.1: PME# disabled [112881.606214] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [112881.606224] HDA Intel 0000:00:1b.0: setting latency timer to 64 [112881.606256] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [112881.606270] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [112881.606283] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [112881.606296] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [112881.606973] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [112881.606982] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [112881.606992] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [112881.607022] usb usb2: root hub lost power or was reset [112881.607079] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [112881.607089] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [112881.607118] usb usb3: root hub lost power or was reset [112881.607712] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [112881.607720] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [112881.607730] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [112881.607760] usb usb4: root hub lost power or was reset [112881.607815] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [112881.607825] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [112881.607854] usb usb5: root hub lost power or was reset [112881.607943] ehci_hcd 0000:00:1d.7: PME# disabled [112881.608473] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [112881.608483] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [112881.608493] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [112881.608504] ehci_hcd 0000:00:1d.7: PME# disabled [112881.608537] pci 0000:00:1e.0: setting latency timer to 64 [112881.608551] PIIX_IDE 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [112881.608584] PIIX_IDE 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880005, writing 0x2800005) [112881.608598] PIIX_IDE 0000:00:1f.1: setting latency timer to 64 [112881.608685] ahci 0000:00:1f.2: setting latency timer to 64 [112881.608916] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [112881.608927] e1000e 0000:02:00.0: setting latency timer to 64 [112881.608940] e1000e 0000:02:00.0: PME# disabled [112881.608950] e1000e 0000:02:00.0: PME# disabled [112881.609039] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [112881.667406] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [112881.667738] iwl3945 0000:03:00.0: irq 30 for MSI/MSI-X [112881.726651] Registered led device: iwl-phy0:radio [112881.726731] Registered led device: iwl-phy0:assoc [112881.726768] Registered led device: iwl-phy0:RX [112881.726809] Registered led device: iwl-phy0:TX [112881.829423] nsc-ircc 00:0a: activated [112882.085804] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [112882.086047] hda: UDMA/33 mode selected [112882.444151] usb 5-2: reset full speed USB device using uhci_hcd and address 2 [112882.597237] sd 0:0:0:0: [sda] Starting disk [112883.552160] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [112883.561788] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [112883.561795] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [112883.561800] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [112883.565000] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [112883.565011] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [112883.565016] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [112883.566241] ata1.00: configured for UDMA/100 [112883.580164] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [112883.580169] ata1: irq_stat 0x00400040, connection status changed [112883.582982] ata1.00: configured for UDMA/100 [112883.582991] ata1: EH complete [112883.583095] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [112883.583129] sd 0:0:0:0: [sda] Write Protect is off [112883.583133] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [112883.583182] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [112883.583238] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [112883.583266] sd 0:0:0:0: [sda] Write Protect is off [112883.583270] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [112883.583316] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [112883.612265] pci 0000:00:02.0: power state changed by ACPI to D0 [112883.612404] pci 0000:00:02.0: power state changed by ACPI to D0 [112883.612415] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [112883.612424] pci 0000:00:02.0: setting latency timer to 64 [112883.620063] Restarting tasks ... done.