Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.29-rc7 (root@minivanes) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu2) ) #16 SMP Mon Mar 9 13:50:38 CET 2009 Command line: root=/dev/sda1 ro video=intelfb:noaccel vga=0x305 cpufreq.debug=7 single KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 00000000df66d800 (usable) BIOS-e820: 00000000df66d800 - 00000000e0000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000120000000 (usable) DMI 2.4 present. last_pfn = 0x120000 max_arch_pfn = 0x100000000 last_pfn = 0xdf66d max_arch_pfn = 0x100000000 init_memory_mapping: 0000000000000000-00000000df66d000 0000000000 - 00df600000 page 2M 00df600000 - 00df66d000 page 4k kernel direct mapping tables up to df66d000 @ 8000-e000 last_map_addr: df66d000 end: df66d000 init_memory_mapping: 0000000100000000-0000000120000000 0100000000 - 0120000000 page 2M kernel direct mapping tables up to 120000000 @ c000-12000 last_map_addr: 120000000 end: 120000000 ACPI: RSDP 000FBBF0, 0024 (r2 DELL ) ACPI: XSDT DF66F200, 0054 (r1 DELL M08 27D8070A ASL 61) ACPI: FACP DF66F09C, 00F4 (r4 DELL M08 27D8070A ASL 61) FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT DF66F800, 5676 (r2 INT430 SYSFexxx 1001 INTL 20050624) ACPI: FACS DF67E000, 0040 ACPI: HPET DF66F300, 0038 (r1 DELL M08 1 ASL 61) ACPI: APIC DF66F400, 0068 (r1 DELL M08 27D8070A ASL 47) ACPI: MCFG DF66F3C0, 003E (r16 DELL M08 27D8070A ASL 61) ACPI: BOOT DF66EFC0, 0028 (r1 DELL M08 27D8070A ASL 61) ACPI: SSDT DF66D9B8, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) ACPI: Local APIC address 0xfee00000 (6 early reservations) ==> bootmem [0000000000 - 0120000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 00017bdd98] TEXT DATA BSS ==> [0001000000 - 00017bdd98] #3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #4 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] #5 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ffffe20000000000-ffffe20003ffffff] PMD -> [ffff880028200000-ffff88002c1fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00120000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000df66d 0: 0x00100000 -> 0x00120000 On node 0 totalpages: 1046028 DMA zone: 56 pages used for memmap DMA zone: 105 pages reserved DMA zone: 3838 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 896677 pages, LIFO batch:31 Normal zone: 1792 pages used for memmap Normal zone: 129280 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 00000000df66d000 - 00000000df66e000 PM: Registered nosave memory: 00000000df66e000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000 PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000 PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000 PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000 PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000 PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 PM: Registered nosave memory: 00000000fee10000 - 00000000fff00000 PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 Allocating PCI resources starting at e2000000 (gap: e0000000:18000000) NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Allocating 49152 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1029795 Kernel command line: root=/dev/sda1 ro video=intelfb:noaccel vga=0x305 cpufreq.debug=7 single Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 1995.041 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) allocated 47185920 bytes of page_cgroup please try cgroup_disable=memory option if you don't want Checking aperture... No AGP bridge found PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 3991240k/4718592k available (4505k kernel code, 534480k absent, 191960k reserved, 2197k data, 360k init) SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.08 BogoMIPS (lpj=7980164) Security Framework initialized SELinux: Disabled at boot. Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys freezer CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K [ds] using Core 2/Atom configuration CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using mwait in idle threads. ACPI: Core revision 20081204 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3990.01 BogoMIPS (lpj=7980029) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K [ds] using Core 2/Atom configuration CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (7980.09 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 1824 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in E820 PCI: Using MMCONFIG at f8000000 - fbffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xfea00000-0xfeafffff] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff] pci 0000:00:02.0: reg 20 io port: [0xeff8-0xefff] pci 0000:00:02.1: reg 10 64bit mmio: [0xfeb00000-0xfebfffff] pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f] pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f] pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf] pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7] pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb] pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7] pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb] pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eff] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe9fb800-0xfe9fbfff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe9fb700-0xfe9fb7ff] pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df] pci 0000:0c:00.0: reg 10 32bit mmio: [0xfe8ff000-0xfe8fffff] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold pci 0000:0c:00.0: PME# disabled pci 0000:00:1c.1: bridge 32bit mmio: [0xfe800000-0xfe8fffff] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff] pci 0000:00:1c.3: bridge 32bit mmio: [0xfe600000-0xfe7fffff] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff] pci 0000:09:00.0: reg 10 64bit mmio: [0xfe5f0000-0xfe5fffff] pci 0000:09:00.0: PME# supported from D3hot D3cold pci 0000:09:00.0: PME# disabled pci 0000:00:1c.5: bridge 32bit mmio: [0xfe500000-0xfe5fffff] pci 0000:03:01.0: reg 10 32bit mmio: [0xfe4ff800-0xfe4fffff] pci 0000:03:01.0: supports D1 D2 pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.0: PME# disabled pci 0000:03:01.1: reg 10 32bit mmio: [0xfe4ff400-0xfe4ff4ff] pci 0000:03:01.1: supports D1 D2 pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.1: PME# disabled pci 0000:03:01.2: reg 10 32bit mmio: [0xfe4ff500-0xfe4ff5ff] pci 0000:03:01.2: supports D1 D2 pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.2: PME# disabled pci 0000:03:01.3: reg 10 32bit mmio: [0xfe4ff600-0xfe4ff6ff] pci 0000:03:01.3: supports D1 D2 pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.3: PME# disabled pci 0000:03:01.4: reg 10 32bit mmio: [0xfe4ff700-0xfe4ff7ff] pci 0000:03:01.4: supports D1 D2 pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.4: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xfe400000-0xfe4fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4 ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: WMI: Mapper loaded PCI: Using ACPI for IRQ routing Bluetooth: Core ver 2.14 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:09: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:09: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0a: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0a: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0a: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0a: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:05: ioport range 0xc80-0xcff could not be reserved system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved system 00:09: ioport range 0x900-0x97f has been reserved system 00:09: ioport range 0x4d0-0x4d1 has been reserved system 00:0a: ioport range 0xf400-0xf4fe has been reserved system 00:0a: ioport range 0x1080-0x10bf has been reserved system 00:0a: ioport range 0x10c0-0x10df has been reserved system 00:0a: ioport range 0x809-0x809 has been reserved system 00:0b: iomem range 0x0-0x9efff could not be reserved system 00:0b: iomem range 0x9f000-0x9ffff could not be reserved system 00:0b: iomem range 0xc0000-0xcffff has been reserved system 00:0b: iomem range 0xe0000-0xfffff has been reserved system 00:0b: iomem range 0x100000-0xdf66d7ff could not be reserved system 00:0b: iomem range 0xdf66d800-0xdf6fffff has been reserved system 00:0b: iomem range 0xdf700000-0xdf7fffff has been reserved system 00:0b: iomem range 0xdf700000-0xdfefffff could not be reserved system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved system 00:0b: iomem range 0xffa00000-0xffafffff has been reserved system 00:0b: iomem range 0xfec00000-0xfec0ffff has been reserved system 00:0b: iomem range 0xfee00000-0xfee0ffff has been reserved system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:0b: iomem range 0xfeda0000-0xfeda3fff has been reserved system 00:0b: iomem range 0xfeda4000-0xfeda4fff has been reserved system 00:0b: iomem range 0xfeda5000-0xfeda5fff has been reserved system 00:0b: iomem range 0xfeda6000-0xfeda6fff has been reserved system 00:0b: iomem range 0xfed18000-0xfed1bfff has been reserved system 00:0b: iomem range 0xf8000000-0xfbffffff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xfe800000-0xfe8fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d pci 0000:00:1c.3: IO window: 0xd000-0xdfff pci 0000:00:1c.3: MEM window: 0xfe600000-0xfe7fffff pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f01fffff pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09 pci 0000:00:1c.5: IO window: disabled pci 0000:00:1c.5: MEM window: 0xfe500000-0xfe5fffff pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0xfe400000-0xfe4fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:0b: resource 0 mem: [0x0-0x0] pci_bus 0000:0b: resource 1 mem: [0x0-0x0] pci_bus 0000:0b: resource 2 mem: [0x0-0x0] pci_bus 0000:0b: resource 3 mem: [0x0-0x0] pci_bus 0000:0c: resource 0 mem: [0x0-0x0] pci_bus 0000:0c: resource 1 mem: [0xfe800000-0xfe8fffff] pci_bus 0000:0c: resource 2 mem: [0x0-0x0] pci_bus 0000:0c: resource 3 mem: [0x0-0x0] pci_bus 0000:0d: resource 0 io: [0xd000-0xdfff] pci_bus 0000:0d: resource 1 mem: [0xfe600000-0xfe7fffff] pci_bus 0000:0d: resource 2 mem: [0xf0000000-0xf01fffff] pci_bus 0000:0d: resource 3 mem: [0x0-0x0] pci_bus 0000:09: resource 0 mem: [0x0-0x0] pci_bus 0000:09: resource 1 mem: [0xfe500000-0xfe5fffff] pci_bus 0000:09: resource 2 mem: [0x0-0x0] pci_bus 0000:09: resource 3 mem: [0x0-0x0] pci_bus 0000:03: resource 0 mem: [0x0-0x0] pci_bus 0000:03: resource 1 mem: [0xfe400000-0xfe4fffff] pci_bus 0000:03: resource 2 mem: [0x0-0x0] pci_bus 0000:03: resource 3 io: [0x00-0xffff] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Simple Boot Flag at 0x79 set to 0x1 Microcode Update Driver: v2.00 , Peter Oruba audit: initializing netlink socket (disabled) type=2000 audit(1236847120.475:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7797 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device ACPI: AC Adapter [AC] (off-line) Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 ACPI: Battery Slot [BAT0] (battery present) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button (CM) [PBTN] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button (CM) [SBTN] acpi device:37: registered as cooling_device0 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:34/input/input3 ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) ACPI Warning (nspredef-0434): \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) [20081204] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:39/input/input4 ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) ACPI: SSDT DF66E4EE, 0286 (r1 PmRef Cpu0Ist 3000 INTL 20050624) ACPI: SSDT DF66DE84, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device1 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT DF66E774, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) ACPI: SSDT DF66E469, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:01: registered as cooling_device2 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM] (40 C) Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:02.0: irq 24 for MSI/MSI-X [drm] Initialized i915 1.6.0 20080730 on minor 0 intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets intelfb: Version 0.9.6 intelfb: 00:02.0: Intel(R) 965GM, aperture size 256MB, stolen memory 7932kB intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching. intelfb: Initial video mode is 1024x768-8@60. intelfb: Changing the video mode is not supported. Console: switching to colour frame buffer device 128x48 brd: module loaded loop: module loaded tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x02) PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 piix 0000:00:1f.1: IDE port disabled piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x6fa0-0x6fa7 Probing IDE interface ide0... hda: PBDS DVD+/-RW DS-8W1P, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-cd driver 5.00 ide-cd: hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ahci 0000:00:1f.2: irq 25 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 25 ata2: DUMMY ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 25 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: WDC WD1600BJKT-75F4T0, 11.01A11, max UDMA/133 ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD1600BJKT-7 11.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 ata3: SATA link down (SStatus 0 SControl 300) usbcore: registered new interface driver libusual usbcore: registered new interface driver usbserial USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu Marking TSC unstable due to TSC halts in idle input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 TCP cubic registered NET: Registered protocol family 10 lo: Disabled Privacy Extensions NET: Registered protocol family 17 NET: Registered protocol family 15 Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 acpi-cpufreq: acpi_cpufreq_init acpi-cpufreq: acpi_cpufreq_early_init cpufreq-core: trying to register driver acpi-cpufreq cpufreq-core: adding CPU 0 acpi-cpufreq: acpi_cpufreq_cpu_init acpi-cpufreq: HARDWARE addr space freq-table: table entry 0: 2001000 kHz, 0 index freq-table: table entry 1: 2000000 kHz, 1 index freq-table: table entry 2: 1600000 kHz, 2 index freq-table: table entry 3: 1200000 kHz, 3 index freq-table: table entry 4: 800000 kHz, 4 index acpi-cpufreq: get_cur_freq_on_cpu (0) acpi-cpufreq: get_cur_val = 100664855 acpi-cpufreq: cur freq = 1200000 acpi-cpufreq: CPU0 - ACPI performance management activated. acpi-cpufreq: *P0: 2001 MHz, 32000 mW, 10 uS acpi-cpufreq: P1: 2000 MHz, 31000 mW, 10 uS acpi-cpufreq: P2: 1600 MHz, 22000 mW, 10 uS acpi-cpufreq: P3: 1200 MHz, 13000 mW, 10 uS acpi-cpufreq: P4: 800 MHz, 10000 mW, 10 uS freq-table: setting show_table for cpu 0 to ffff88011fb7a380 cpufreq-core: setting new policy for CPU 0: 800000 - 2001000 kHz acpi-cpufreq: acpi_cpufreq_verify freq-table: request for verification of policy (800000 - 2001000 kHz) for cpu 0 freq-table: verification lead to (800000 - 2001000 kHz) for cpu 0 acpi-cpufreq: acpi_cpufreq_verify freq-table: request for verification of policy (800000 - 2001000 kHz) for cpu 0 freq-table: verification lead to (800000 - 2001000 kHz) for cpu 0 cpufreq-core: new min and max freqs are 800000 - 2001000 kHz cpufreq-core: governor switch cpufreq-core: __cpufreq_governor for CPU 0, event 1 cpufreq-core: governor: change or update limits cpufreq-core: __cpufreq_governor for CPU 0, event 3 cpufreq-core: initialization complete cpufreq-core: adding CPU 1 acpi-cpufreq: acpi_cpufreq_cpu_init acpi-cpufreq: HARDWARE addr space freq-table: table entry 0: 2001000 kHz, 0 index freq-table: table entry 1: 2000000 kHz, 1 index freq-table: table entry 2: 1600000 kHz, 2 index freq-table: table entry 3: 1200000 kHz, 3 index freq-table: table entry 4: 800000 kHz, 4 index acpi-cpufreq: get_cur_freq_on_cpu (1) acpi-cpufreq: get_cur_val = 100664855 acpi-cpufreq: cur freq = 1200000 acpi-cpufreq: CPU1 - ACPI performance management activated. acpi-cpufreq: *P0: 2001 MHz, 32000 mW, 10 uS acpi-cpufreq: P1: 2000 MHz, 31000 mW, 10 uS acpi-cpufreq: P2: 1600 MHz, 22000 mW, 10 uS acpi-cpufreq: P3: 1200 MHz, 13000 mW, 10 uS acpi-cpufreq: P4: 800 MHz, 10000 mW, 10 uS freq-table: setting show_table for cpu 1 to ffff88011fb7a140 cpufreq-core: setting new policy for CPU 1: 800000 - 2001000 kHz acpi-cpufreq: acpi_cpufreq_verify freq-table: request for verification of policy (800000 - 2001000 kHz) for cpu 1 freq-table: verification lead to (800000 - 2001000 kHz) for cpu 1 acpi-cpufreq: acpi_cpufreq_verify freq-table: request for verification of policy (800000 - 2001000 kHz) for cpu 1 freq-table: verification lead to (800000 - 2001000 kHz) for cpu 1 cpufreq-core: new min and max freqs are 800000 - 2001000 kHz cpufreq-core: governor switch cpufreq-core: __cpufreq_governor for CPU 1, event 1 cpufreq-core: governor: change or update limits cpufreq-core: __cpufreq_governor for CPU 1, event 3 cpufreq-core: initialization complete cpufreq-core: driver acpi-cpufreq up and running registered taskstats version 1 rtc_cmos 00:03: setting system clock to 2009-03-12 08:38:43 UTC (1236847123) cpufreq-core: target for CPU 0: 143478 kHz, relation 0 acpi-cpufreq: acpi_cpufreq_target 143478 (0) freq-table: request for target 143478 kHz (relation: 0) for cpu 0 freq-table: target is 4 (800000 kHz, 4) cpufreq-core: notification 0 of frequency transition to 800000 kHz cpufreq-core: notification 1 of frequency transition to 800000 kHz cpufreq-core: target for CPU 1: 26086 kHz, relation 0 acpi-cpufreq: acpi_cpufreq_target 26086 (1) freq-table: request for target 26086 kHz (relation: 0) for cpu 1 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:1. Freeing unused kernel memory: 360k freed Write protecting the kernel read-only data: 6312k cpufreq-core: setting new policy for CPU 0: 800000 - 2001000 kHz acpi-cpufreq: acpi_cpufreq_verify freq-table: request for verification of policy (800000 - 2001000 kHz) for cpu 0 freq-table: verification lead to (800000 - 2001000 kHz) for cpu 0 acpi-cpufreq: acpi_cpufreq_verify freq-table: request for verification of policy (800000 - 2001000 kHz) for cpu 0 freq-table: verification lead to (800000 - 2001000 kHz) for cpu 0 cpufreq-core: new min and max freqs are 800000 - 2001000 kHz cpufreq-core: governor: change or update limits cpufreq-core: __cpufreq_governor for CPU 0, event 3 cpufreq-core: setting new policy for CPU 1: 800000 - 2001000 kHz acpi-cpufreq: acpi_cpufreq_verify freq-table: request for verification of policy (800000 - 2001000 kHz) for cpu 1 freq-table: verification lead to (800000 - 2001000 kHz) for cpu 1 acpi-cpufreq: acpi_cpufreq_verify freq-table: request for verification of policy (800000 - 2001000 kHz) for cpu 1 freq-table: verification lead to (800000 - 2001000 kHz) for cpu 1 cpufreq-core: new min and max freqs are 800000 - 2001000 kHz cpufreq-core: governor: change or update limits cpufreq-core: __cpufreq_governor for CPU 1, event 3 Clocksource tsc unstable (delta = -385662841 ns) atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). atkbd.c: Use 'setkeycodes e006 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). atkbd.c: Use 'setkeycodes e006 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). atkbd.c: Use 'setkeycodes e006 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). atkbd.c: Use 'setkeycodes e006 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). atkbd.c: Use 'setkeycodes e006 ' to make it known. __ratelimit: 13 callbacks suppressed cpufreq-core: target for CPU 0: 2001000 kHz, relation 1 acpi-cpufreq: acpi_cpufreq_target 2001000 (0) freq-table: request for target 2001000 kHz (relation: 1) for cpu 0 freq-table: target is 0 (2001000 kHz, 0) cpufreq-core: notification 0 of frequency transition to 2001000 kHz cpufreq-core: notification 1 of frequency transition to 2001000 kHz uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected tg3.c:v3.97 (December 10, 2008) tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 tg3 0000:09:00.0: setting latency timer to 64 tg3 0000:09:00.0: PME# disabled ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22) sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA cpufreq-core: target for CPU 0: 500250 kHz, relation 0 acpi-cpufreq: acpi_cpufreq_target 500250 (0) freq-table: request for target 500250 kHz (relation: 0) for cpu 0 freq-table: target is 4 (800000 kHz, 4) lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1e:c9:02:90:f0 eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0]) eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0] eth0: dma_rwctrl[76180000] dma_mask[64-bit] ricoh-mmc: Ricoh MMC Controller disabling driver ricoh-mmc: Copyright(c) Philip Langdale ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 12) ricoh-mmc: Controller is now disabled. iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks iwl3945: Copyright(c) 2003-2008 Intel Corporation iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwl3945 0000:0c:00.0: setting latency timer to 64 iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels iwl3945: Detected Intel Wireless WiFi Link 3945ABG iwl3945 0000:0c:00.0: PCI INT A disabled wmaster0 (iwl3945): not using net_device_ops yet phy0: Selected rate control algorithm 'iwl-3945-rs' wlan0 (iwl3945): not using net_device_ops yet ohci1394 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fe4ff800-fe4fffff] Max Packet=[2048] IR/IT contexts=[4/4] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:1b.0: setting latency timer to 64 hda-codec: No codec parser is available usb 7-6: new high speed USB device using ehci_hcd and address 3 usb 7-6: configuration #1 chosen from 1 choice Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1d.7/usb7/7-6/7-6:1.0/input/input8 input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input9 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input10 input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input11 usb 1-2: new full speed USB device using uhci_hcd and address 2 usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 3 ports detected usb 3-1: new low speed USB device using uhci_hcd and address 2 Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1 across:1951888k EXT3 FS on sda1, internal journal ieee1394: Host added: ID:BUS[0-00:1023] GUID[394fc0000d534470] usb 3-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input12 generic-usb 0003:046D:C00F.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver usb 1-2.1: new full speed USB device using uhci_hcd and address 3 usb 1-2.1: configuration #1 chosen from 1 choice EXT4-fs: barriers enabled Bluetooth: Generic Bluetooth USB driver ver 0.4 usbcore: registered new interface driver btusb kjournald2 starting: pid 1896, dev sda3:8, commit interval 5 seconds EXT4-fs warning: maximal mount count reached, running e2fsck is recommended EXT4 FS on sda3, internal journal on sda3:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem sda3 with ordered data mode usb 1-2.2: new full speed USB device using uhci_hcd and address 4 usb 1-2.2: configuration #1 chosen from 1 choice input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input13 generic-usb 0003:0A5C:4502.0002: input,hidraw1: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0 usb 1-2.3: new full speed USB device using uhci_hcd and address 5 usb 1-2.3: configuration #1 chosen from 1 choice input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2.3/1-2.3:1.0/input/input14 generic-usb 0003:0A5C:4503.0003: input,hidraw2: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0 __ratelimit: 2 callbacks suppressed acpi-cpufreq: get_cur_freq_on_cpu (0) acpi-cpufreq: get_cur_val = 100698127 acpi-cpufreq: cur freq = 800000 acpi-cpufreq: get_cur_freq_on_cpu (0) acpi-cpufreq: get_cur_val = 100698127 acpi-cpufreq: cur freq = 800000 acpi-cpufreq: get_cur_freq_on_cpu (0) acpi-cpufreq: get_cur_val = 100698127 acpi-cpufreq: cur freq = 800000 acpi-cpufreq: get_cur_freq_on_cpu (0) acpi-cpufreq: get_cur_val = 100698127 acpi-cpufreq: cur freq = 800000 acpi-cpufreq: get_cur_freq_on_cpu (0) acpi-cpufreq: get_cur_val = 100698127 acpi-cpufreq: cur freq = 800000 atkbd.c: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0). atkbd.c: Use 'setkeycodes e00d ' to make it known. cpufreq-core: CPU 0: _PPC is 4 - frequency limited cpufreq-core: updating policy for CPU 0 acpi-cpufreq: get_cur_freq_on_cpu (0) acpi-cpufreq: get_cur_val = 100698127 acpi-cpufreq: cur freq = 800000 cpufreq-core: setting new policy for CPU 0: 800000 - 2001000 kHz acpi-cpufreq: acpi_cpufreq_verify freq-table: request for verification of policy (800000 - 2001000 kHz) for cpu 0 freq-table: verification lead to (800000 - 2001000 kHz) for cpu 0 acpi-cpufreq: acpi_cpufreq_verify freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0 freq-table: verification lead to (800000 - 800000 kHz) for cpu 0 cpufreq-core: new min and max freqs are 800000 - 800000 kHz cpufreq-core: governor: change or update limits cpufreq-core: __cpufreq_governor for CPU 0, event 3 cpufreq-core: CPU 1: _PPC is 4 - frequency limited cpufreq-core: updating policy for CPU 1 acpi-cpufreq: get_cur_freq_on_cpu (1) acpi-cpufreq: get_cur_val = 100698127 acpi-cpufreq: cur freq = 800000 cpufreq-core: setting new policy for CPU 1: 800000 - 2001000 kHz acpi-cpufreq: acpi_cpufreq_verify freq-table: request for verification of policy (800000 - 2001000 kHz) for cpu 1 freq-table: verification lead to (800000 - 2001000 kHz) for cpu 1 acpi-cpufreq: acpi_cpufreq_verify freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 1 freq-table: verification lead to (800000 - 800000 kHz) for cpu 1 cpufreq-core: new min and max freqs are 800000 - 800000 kHz cpufreq-core: governor: change or update limits cpufreq-core: __cpufreq_governor for CPU 1, event 3 acpi-cpufreq: get_cur_freq_on_cpu (0) acpi-cpufreq: get_cur_val = 100698127 acpi-cpufreq: cur freq = 800000 acpi-cpufreq: get_cur_freq_on_cpu (0) acpi-cpufreq: get_cur_val = 100698127 acpi-cpufreq: cur freq = 800000 acpi-cpufreq: get_cur_freq_on_cpu (0) acpi-cpufreq: get_cur_val = 100698127 acpi-cpufreq: cur freq = 800000 acpi-cpufreq: get_cur_freq_on_cpu (0) acpi-cpufreq: get_cur_val = 100698127 acpi-cpufreq: cur freq = 800000 acpi-cpufreq: get_cur_freq_on_cpu (0) acpi-cpufreq: get_cur_val = 100698127 acpi-cpufreq: cur freq = 800000 acpi-cpufreq: get_cur_freq_on_cpu (0) acpi-cpufreq: get_cur_val = 100698127 acpi-cpufreq: cur freq = 800000 acpi-cpufreq: get_cur_freq_on_cpu (0) acpi-cpufreq: get_cur_val = 100698127 acpi-cpufreq: cur freq = 800000 acpi-cpufreq: get_cur_freq_on_cpu (0) acpi-cpufreq: get_cur_val = 100698127 acpi-cpufreq: cur freq = 800000