=============================================================================== MPTable, version 2.0.15 Linux ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: BIOS physical address: 0x000f4bb0 signature: '_MP_' length: 16 bytes version: 1.4 checksum: 0x64 mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x0xf0d20 signature: 'PCMP' base table length: 264 version: 1.4 checksum: 0xae OEM ID: 'OEM00000' Product ID: 'PROD00000000' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 26 local APIC address: 0xfee00000 extended table length: 0 extended table checksum: 0 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 0 0x11 BSP, usable 6 6 2 0xfbff -- Bus: Bus ID Type 0 PCI 1 PCI 2 ISA -- I/O APICs: APIC ID Version State Address 2 0x11 usable 0xfec00000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# INT active-lo level 0 16:A 2 21 INT active-lo level 0 16:B 2 21 INT active-lo level 0 16:C 2 21 INT active-lo level 0 16:D 2 19 INT active-lo level 0 10:A 2 18 INT active-lo level 1 0:A 2 16 INT active-lo level 0 19:A 2 18 ExtINT conforms conforms 2 0 2 0 INT conforms conforms 2 1 2 1 INT conforms conforms 2 0 2 2 INT conforms conforms 2 3 2 3 INT conforms conforms 2 4 2 4 INT conforms conforms 2 5 2 5 INT conforms conforms 2 6 2 6 INT active-hi edge 2 8 2 8 INT conforms conforms 2 9 2 9 INT conforms conforms 2 13 2 13 INT conforms conforms 2 14 2 14 INT conforms conforms 2 15 2 15 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT conforms conforms 0 0:A 255 0 NMI conforms conforms 0 0:A 255 1 ------------------------------------------------------------------------------- dmesg output: Linux version 2.5.64-ac1-rous3 (root@rousalka) (gcc version 3.2.2 20030217 (Red Hat Linux 8.0 3.2.2-2)) #2 Thu Mar 6 23:45:20 CET 2003 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. found SMP MP-table at 000f4bb0 hm, page 000f4000 reserved twice. hm, page 000f5000 reserved twice. hm, page 000f0000 reserved twice. hm, page 000f1000 reserved twice. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 ACPI: RSDP (v000 GBT ) @ 0x000f6520 ACPI: RSDT (v001 GBT AWRDACPI 16944.11825) @ 0x1fff3000 ACPI: FADT (v001 GBT AWRDACPI 16944.11825) @ 0x1fff3040 ACPI: MADT (v001 GBT AWRDACPI 16944.11825) @ 0x1fff6ac0 ACPI: DSDT (v001 GBT AWRDACPI 00000.04096) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:6 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x0] trigger[0x0] lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x3] trigger[0x3]) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Building zonelist for node : 0 Kernel command line: ro root=/dev/hdc1 video=matrox:vesa:0x11B,fh:96,fv:160 Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1741.195 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3432.44 BogoMIPS Memory: 514064k/524224k available (2831k kernel code, 9428k reserved, 948k data, 132k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Failed to register 'sysfs' in sysfs -> /dev -> /dev/console -> /root CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Machine check exception polling timer started. CPU: AMD Athlon(tm) XP 2100+ stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 16. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178003 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0003 INFO: unexpected IO-APIC, please file a report at http://bugzilla.kernel.org if your kernel is less than 3 months old. .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 1 1 0 1 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1741.0102 MHz. ..... host bus clock speed is 267.0862 MHz. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mtrr: v2.0 (20020519) PCI: Using configuration type 1 BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030228 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [ALKA] (IRQs 20, disabled) ACPI: PCI Interrupt Link [ALKB] (IRQs 21, disabled) ACPI: PCI Interrupt Link [ALKC] (IRQs 22, disabled) ACPI: PCI Interrupt Link [ALKD] (IRQs 23, disabled) block request queues: 128 requests per read queue 128 requests per write queue 8 requests per batch enter congestion at 15 exit congestion at 17 SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 0 ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 0 ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 0 ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 0 IOAPIC[0]: Set PCI routing entry (2-17 -> 0xa9 -> IRQ 17) 00:00:09[A] -> 2-17 -> IRQ 17 IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb1 -> IRQ 18) 00:00:09[B] -> 2-18 -> IRQ 18 IOAPIC[0]: Set PCI routing entry (2-19 -> 0xb9 -> IRQ 19) 00:00:09[C] -> 2-19 -> IRQ 19 IOAPIC[0]: Set PCI routing entry (2-16 -> 0xc1 -> IRQ 16) 00:00:09[D] -> 2-16 -> IRQ 16 Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed ACPI: No IRQ known for interrupt pin A of device 00:10.0 ACPI: No IRQ known for interrupt pin B of device 00:10.1 ACPI: No IRQ known for interrupt pin C of device 00:10.2 ACPI: No IRQ known for interrupt pin D of device 00:10.3 ACPI: No IRQ known for interrupt pin A of device 00:11.1 - using IRQ 255 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' powernow: AMD K7 CPU detected. powernow: PowerNOW! Technology present. Can scale: nothing. IA-32 Microcode Update Driver: v1.11 Enabling SEP on CPU 0 ikconfig 0.5 without /proc/ikconfig aio_setup: sizeof(struct page) = 40 VFS: Disk quotas dquot_6.5.1 Journalled Block Device driver loaded NTFS driver 2.1.0 [Flags: R/O]. udf: registering filesystem Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states) pty: 256 Unix98 ptys configured Real Time Clock Driver v1.11 Non-volatile memory driver v1.2 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA Apollo Pro KT400 chipset agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 64M @ 0xe0000000 [drm] Initialized mga 3.1.0 20021029 on minor 0 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 8139too Fast Ethernet driver 0.9.26 eth0: RealTek RTL8139 Fast Ethernet at 0xe0807000, 00:20:ed:44:99:54, IRQ 18 eth0: Identified 8139 chip type 'RTL-8139C' Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:11.1 ACPI: No IRQ known for interrupt pin A of device 00:11.1 - using IRQ 255 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1 ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:DMA hda: IBM-DJNA-371350, ATA DISK drive hdb: YAMAHA CRW2100E, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: MAXTOR 6L080J4, ATA DISK drive hdd: TOSHIBA DVD-ROM SD-M1302, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 26520480 sectors (13578 MB) w/1966KiB Cache, CHS=26310/16/63 hda:<6> [PTBL] [1650/255/63] hda1 hda2 < hda5 hda6 > hdc: host protected area => 1 hdc: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=155114/16/63, UDMA(133) hdc: hdc1 hdc2 hdb: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, UDMA(25) Uniform CD-ROM driver Revision: 3.12 end_request: I/O error, dev hdb, sector 0 hdd: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(33) request_module: failed /sbin/modprobe -- scsi_hostadapter. error = -16 ACPI: No IRQ known for interrupt pin D of device 00:10.3 ehci-hcd 00:10.3: VIA Technologies, In USB 2.0 ehci-hcd 00:10.3: irq 12, pci mem e082e000 Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. ehci-hcd 00:10.3: new USB bus registered, assigned bus number 1 PCI: 00:10.3 PCI cache line size set incorrectly (32 bytes) by BIOS/FW, correcting to 64 ehci-hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22 hub 1-0:0: USB hub found hub 1-0:0: 6 ports detected Initializing USB Mass Storage driver... drivers/usb/core/usb.c: registered new driver usb-storage USB Mass Storage support registered. drivers/usb/core/usb.c: registered new driver hiddev drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: PC Speaker i2c-dev.o: i2c /dev entries driver module version 2.7.0 (20021208) i2c-proc.o version 2.7.0 (20021208) Advanced Linux Sound Architecture Driver Version 0.9.0rc7 (Sat Feb 15 15:01:21 2003 UTC). hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x501 ALSA device list: #0: Sound Fusion CS46xx at 0xe9100000/0xe9000000, irq 18 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 1024 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 9362) ip_conntrack version 2.1 (4095 buckets, 32760 max) - 184 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 132k freed hub 1-0:0: new USB device on port 1, assigned address 2 Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide1(22,1), internal journal Adding 262072k swap on /dev/hdc2. Priority:-1 extents:1 Adding 265032k swap on /dev/hda6. Priority:-2 extents:1 drivers/usb/core/message.c: usb_control/bulk_msg: timeout drivers/usb/core/message.c: usb_control/bulk_msg: timeout usb 1-1: USB device not accepting new address=2 (error=-110) hub 1-0:0: new USB device on port 1, assigned address 3 eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1. drivers/usb/core/message.c: usb_control/bulk_msg: timeout drivers/usb/core/message.c: usb_control/bulk_msg: timeout usb 1-1: USB device not accepting new address=3 (error=-110) hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x501 hub 1-0:0: new USB device on port 1, assigned address 4 drivers/usb/core/message.c: usb_control/bulk_msg: timeout --------------- scanpci output: pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x1106 device 0x3189 VIA Technologies, Inc. VT8377 [KT400] Host Bridge pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x1106 device 0xb168 VIA Technologies, Inc. VT8235 pci bus 0x0000 cardnum 0x0a function 0x00: vendor 0x1013 device 0x6003 Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] pci bus 0x0000 cardnum 0x10 function 0x00: vendor 0x1106 device 0x3038 VIA Technologies, Inc. USB pci bus 0x0000 cardnum 0x10 function 0x01: vendor 0x1106 device 0x3038 VIA Technologies, Inc. USB pci bus 0x0000 cardnum 0x10 function 0x02: vendor 0x1106 device 0x3038 VIA Technologies, Inc. USB pci bus 0x0000 cardnum 0x10 function 0x03: vendor 0x1106 device 0x3104 VIA Technologies, Inc. USB 2.0 pci bus 0x0000 cardnum 0x11 function 0x00: vendor 0x1106 device 0x3177 VIA Technologies, Inc. VT8233A ISA Bridge pci bus 0x0000 cardnum 0x11 function 0x01: vendor 0x1106 device 0x0571 VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE pci bus 0x0000 cardnum 0x13 function 0x00: vendor 0x10ec device 0x8139 Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x102b device 0x0525 Matrox Graphics, Inc. MGA G400 AGP ----------------- /proc/pci output: ------------------------ /proc/interrupts output: CPU0 0: 33945 IO-APIC-edge timer 2: 0 XT-PIC cascade 8: 1 IO-APIC-edge rtc 9: 0 IO-APIC-level acpi 12: 0 IO-APIC-edge ehci-hcd 14: 47 IO-APIC-edge ide0 15: 2918 IO-APIC-edge ide1 18: 57 IO-APIC-level CS46XX, eth0 NMI: 0 LOC: 33873 ERR: 0 MIS: 0 ===============================================================================