BIOS EBDA/lowmem at: 0009fc00/0009fc00 Linux version 2.6.28-rc9-rjw (rafael@chimera) (gcc version 4.2.1 (SUSE Linux)) #149 SMP Fri Dec 19 22:56:23 CET 2008 Command line: root=/dev/disk/by-id/ata-SAMSUNG_HM100JC_S0CFJ10YC30944-part6 resume=/dev/sda3 no_console_suspend console=ttyS0,57600 console=tty0 debug vga=792 noapic KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000005ff40000 (usable) BIOS-e820: 000000005ff40000 - 000000005ff50000 (ACPI data) BIOS-e820: 000000005ff50000 - 0000000060000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) DMI 2.3 present. AMI BIOS detected: BIOS may corrupt low RAM, working it around. last_pfn = 0x5ff40 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Scanning 0 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009fc00 (usable) modified: 000000000009fc00 - 00000000000a0000 (reserved) modified: 00000000000e0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000005ff40000 (usable) modified: 000000005ff40000 - 000000005ff50000 (ACPI data) modified: 000000005ff50000 - 0000000060000000 (ACPI NVS) modified: 00000000fec00000 - 00000000fec01000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) init_memory_mapping: 0000000000000000-000000005ff40000 0000000000 - 005ff40000 page 4k kernel direct mapping tables up to 5ff40000 @ e38000-113b000 last_map_addr: 5ff40000 end: 5ff40000 RAMDISK: 37793000 - 37fef2d5 ACPI: RSDP 000F76E0, 0014 (r0 ACPIAM) ACPI: RSDT 5FF40000, 002C (r1 A M I OEMRSDT 5000425 MSFT 97) ACPI: FACP 5FF40200, 0081 (r1 A M I OEMFACP 5000425 MSFT 97) ACPI: DSDT 5FF40400, 6383 (r1 L5DK8 L5DK8014 14 INTL 2002026) ACPI: FACS 5FF50000, 0040 ACPI: OEMB 5FF50040, 0041 (r1 A M I OEMBIOS 5000425 MSFT 97) (6 early reservations) ==> bootmem [0000000000 - 005ff40000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000e373c0] TEXT DATA BSS ==> [0000200000 - 0000e373c0] #3 [0037793000 - 0037fef2d5] RAMDISK ==> [0037793000 - 0037fef2d5] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0000e38000 - 0001139000] PGTABLE ==> [0000e38000 - 0001139000] found SMP MP-table at [ffff8800000ff780] 000ff780 [ffffe20000000000-ffffe200021fffff] PMD -> [ffff880001400000-ffff8800035fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0005ff40 On node 0 totalpages: 392911 DMA zone: 88 pages used for memmap DMA zone: 3228 pages reserved DMA zone: 667 pages, LIFO batch:0 DMA32 zone: 8356 pages used for memmap DMA32 zone: 380572 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 Intel MultiProcessor Specification v1.1 MPTABLE: OEM ID: ASUSTeK MPTABLE: Product ID: L5D MPTABLE: APIC at: 0xFEE00000 Processor #0 (Bootup-CPU) I/O APIC #1 Version 17 at 0xFEC00000. Processors: 1 SMP: Allowing 1 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000) PERCPU: Allocating 45056 bytes of per cpu data NR_CPUS: 8, nr_cpu_ids: 1, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 381239 Kernel command line: root=/dev/disk/by-id/ata-SAMSUNG_HM100JC_S0CFJ10YC30944-part6 resume=/dev/sda3 no_console_suspend console=ttyS0,57600 console=tty0 debug vga=792 noapic Initializing CPU#0 RCU-based detection of stalled CPUs is enabled. PID hash table entries: 4096 (order: 12, 32768 bytes) Fast TSC calibration using PIT Detected 1795.243 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour dummy device 80x25 console [tty0] enabled console [ttyS0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 3839 kB per task-struct memory footprint: 1920 bytes Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Scanning for low memory corruption every 60 seconds Checking aperture... AGP bridge at 00:00:00 Aperture from AGP @ e8000000 old size 32 MB Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB Aperture from AGP @ e8000000 size 32 MB (APSIZE 0) Node 0: aperture @ e8000000 size 128 MB Memory: 1508648k/1572096k available (2811k kernel code, 452k absent, 62300k reserved, 1687k data, 384k init) Calibrating delay loop (skipped), value calculated using timer frequency.. 3590.48 BogoMIPS (lpj=7180972) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) tseg: 0000000000 SMP alternatives: switching to UP code debug: unmapping init memory ffffffff80684000..ffffffff8068a000 ACPI: Core revision 20080926 ACPI: setting ELCR to 0200 (from 0c20) Setting APIC routing to flat CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 0a Brought up 1 CPUs Total of 1 processors activated (3590.48 BogoMIPS). CPU0 attaching NULL sched-domain. khelper used greatest stack depth: 5840 bytes left net_namespace: 1424 bytes Time: 23:07:34 Date: 12/19/08 NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 0000000060000000 aka 1536M node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [60000000, fe0bffff] bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [60000000, fcffffffff] ACPI: bus type pci registered PCI: Using configuration type 1 for base access khelper used greatest stack depth: 5488 bytes left ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: EC: GPE = 0x25, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff] pci 0000:00:01.1: reg 20 io port: [0x5000-0x503f] pci 0000:00:01.1: reg 24 io port: [0x5040-0x507f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:02.0: reg 10 32bit mmio: [0xfebfb000-0xfebfbfff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10 32bit mmio: [0xfebfc000-0xfebfcfff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:02.2: reg 10 32bit mmio: [0xfebfdc00-0xfebfdcff] pci 0000:00:02.2: supports D1 D2 pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.2: PME# disabled pci 0000:00:06.0: reg 10 io port: [0xe400-0xe4ff] pci 0000:00:06.0: reg 14 io port: [0xe080-0xe0ff] pci 0000:00:06.0: reg 18 32bit mmio: [0xfebfe000-0xfebfefff] pci 0000:00:06.0: supports D1 D2 pci 0000:00:06.1: reg 10 io port: [0xe800-0xe8ff] pci 0000:00:06.1: reg 14 io port: [0xec00-0xec7f] pci 0000:00:06.1: reg 18 32bit mmio: [0xfebff000-0xfebfffff] pci 0000:00:06.1: PME# supported from D3cold pci 0000:00:06.1: PME# disabled pci 0000:00:08.0: reg 20 io port: [0xffa0-0xffaf] pci 0000:02:00.0: reg 10 32bit mmio: [0xfeaf8000-0xfeafbfff] pci 0000:02:00.0: reg 14 io port: [0xd800-0xd8ff] pci 0000:02:00.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:01.0: reg 10 32bit mmio: [0xfd200000-0xfd200fff] pci 0000:02:01.0: supports D1 D2 pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:01.0: PME# disabled pci 0000:02:01.1: reg 10 32bit mmio: [0xfa200000-0xfa200fff] pci 0000:02:01.1: supports D1 D2 pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:01.1: PME# disabled pci 0000:02:01.2: reg 10 32bit mmio: [0xfeafd000-0xfeafd7ff] pci 0000:02:01.2: PME# supported from D0 D3hot D3cold pci 0000:02:01.2: PME# disabled pci 0000:02:01.3: reg 10 32bit mmio: [0xfeafd800-0xfeafd8ff] pci 0000:02:01.3: supports D1 D2 pci 0000:02:01.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:01.3: PME# disabled pci 0000:02:01.4: reg 10 32bit mmio: [0xfeafdc00-0xfeafdcff] pci 0000:02:01.4: supports D1 D2 pci 0000:02:01.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:01.4: PME# disabled pci 0000:02:02.0: reg 10 32bit mmio: [0xfeafe000-0xfeafffff] pci 0000:02:02.0: supports D1 D2 pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:02.0: PME# disabled pci 0000:00:0a.0: bridge io port: [0xb000-0xdfff] pci 0000:00:0a.0: bridge 32bit mmio: [0xf8a00000-0xfeafffff] pci 0000:01:00.0: reg 10 32bit mmio: [0xf7000000-0xf7ffffff] pci 0000:01:00.0: reg 14 32bit mmio: [0xd0000000-0xdfffffff] pci 0000:01:00.0: reg 30 32bit mmio: [0xf89e0000-0xf89fffff] pci 0000:00:0b.0: bridge 32bit mmio: [0xf6900000-0xf89fffff] pci 0000:00:0b.0: bridge 32bit mmio pref: [0xc6800000-0xe67fffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUS0] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUS1] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUS2] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LKLN] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LAUI] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LKMO] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LATA] (IRQs 3 4 6 7 10 11 12 *14 15) ACPI: Power Resource [GFAN] (off) ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 4E, should be 39 [20080926] usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing pci 0000:00:00.0: BAR 0: can't allocate resource NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default agpgart-amd64 0000:00:00.0: AGP bridge [10de/00d1] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:0c: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling pnp 00:0c: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling pnp 00:0c: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling pnp 00:0c: mem resource (0x100000-0x5fffffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:05: ioport range 0x190-0x193 has been reserved system 00:05: ioport range 0x4d0-0x4d1 has been reserved system 00:05: ioport range 0xc02-0xc05 has been reserved system 00:06: iomem range 0xfec00000-0xfec00fff has been reserved system 00:06: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:06: iomem range 0xff780000-0xff7bffff has been reserved system 00:0c: iomem range 0xff7c0000-0xffffffff has been reserved pci 0000:02:01.0: BAR 10: can't allocate mem resource [0x100000000-0xfeafffff] pci 0000:02:01.1: BAR 10: can't allocate mem resource [0x100000000-0xfeafffff] pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03 pci 0000:02:01.0: IO window: 0x00b000-0x00b0ff pci 0000:02:01.0: IO window: 0x00b400-0x00b4ff pci 0000:02:01.0: PREFETCH window: 0x70000000-0x73ffffff pci 0000:02:01.1: CardBus bridge, secondary bus 0000:04 pci 0000:02:01.1: IO window: 0x00b800-0x00b8ff pci 0000:02:01.1: IO window: 0x00bc00-0x00bcff pci 0000:02:01.1: PREFETCH window: 0x74000000-0x77ffffff pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0a.0: IO window: 0xb000-0xdfff pci 0000:00:0a.0: MEM window: 0xf8a00000-0xfeafffff pci 0000:00:0a.0: PREFETCH window: 0x00000070000000-0x00000077ffffff pci 0000:00:0b.0: PCI bridge, secondary bus 0000:01 pci 0000:00:0b.0: IO window: disabled pci 0000:00:0b.0: MEM window: 0xf6900000-0xf89fffff pci 0000:00:0b.0: PREFETCH window: 0x000000c6800000-0x000000e67fffff pci 0000:00:0a.0: setting latency timer to 64 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered pci 0000:02:01.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:02:01.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] bus: 02 index 0 io port: [0xb000-0xdfff] bus: 02 index 1 mmio: [0xf8a00000-0xfeafffff] bus: 02 index 2 mmio: [0x70000000-0x77ffffff] bus: 02 index 3 mmio: [0x0-0x0] bus: 03 index 0 io port: [0xb000-0xb0ff] bus: 03 index 1 io port: [0xb400-0xb4ff] bus: 03 index 2 mmio: [0x70000000-0x73ffffff] bus: 03 index 3 mmio: [0x0-0x0] bus: 04 index 0 io port: [0xb800-0xb8ff] bus: 04 index 1 io port: [0xbc00-0xbcff] bus: 04 index 2 mmio: [0x74000000-0x77ffffff] bus: 04 index 3 mmio: [0x0-0x0] bus: 01 index 0 mmio: [0x0-0x0] bus: 01 index 1 mmio: [0xf6900000-0xf89fffff] bus: 01 index 2 mmio: [0xc6800000-0xe67fffff] bus: 01 index 3 mmio: [0x0-0x0] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is debug: unmapping init memory ffff880037793000..ffff880037ff0000 audit: initializing netlink socket (disabled) type=2000 audit(1229728055.421:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 2947 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci 0000:01:00.0: Boot video device vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000080000, using 6144k, total 65536k vesafb: mode is 1024x768x32, linelength=4096, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [LKMO] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered serial 0000:00:06.1: PCI INT B -> Link[LKMO] -> GSI 10 (level, low) -> IRQ 10 serial 0000:00:06.1: PCI INT B disabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input1 rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 modprobe used greatest stack depth: 5416 bytes left usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x0 (800 MHz), vid 0x12 powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x6 powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x2 Magic number: 4:969:150 bdi 1:2: hash matches tty ttyp4: hash matches rtc_cmos 00:02: setting system clock to 2008-12-19 23:07:38 UTC (1229728058) debug: unmapping init memory ffffffff8068a000..ffffffff806ea000 Write protecting the kernel read-only data: 4160k ACPI: Invalid PBLK length [0] processor ACPI_CPU:00: registered as cooling_device0 modprobe used greatest stack depth: 5344 bytes left thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (55 C) modprobe used greatest stack depth: 5240 bytes left SCSI subsystem initialized libata version 3.00 loaded. pata_amd 0000:00:08.0: version 0.3.10 pata_amd 0000:00:08.0: setting latency timer to 64 scsi0 : pata_amd scsi1 : pata_amd ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 ata1.01: ATAPI: TOSHIBA DVD-ROM SD-R2512, 1720, max UDMA/33 ata1: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0c600) ACPI=0x701f (900:54:0x14) ata1.01: configured for UDMA/33 Synaptics Touchpad, model: 1, fw: 5.9, id: 0x926eb1, caps: 0x804719/0x0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input3 ata2.00: ATA-7: SAMSUNG HM100JC, YN100-08, max UDMA/100 ata2.00: 195371568 sectors, multi 16: LBA48 ata2: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc0c600) ACPI=0x3f01f (17:900:0x11) ata2.00: configured for UDMA/100 isa bounce pool size: 16 pages scsi 0:0:1:0: CD-ROM TOSHIBA DVD-ROM SD-R2512 1720 PQ: 0 ANSI: 5 scsi 1:0:0:0: Direct-Access ATA SAMSUNG HM100JC YN10 PQ: 0 ANSI: 5 modprobe used greatest stack depth: 4072 bytes left fan PNP0C0B:00: registered as cooling_device1 ACPI: Fan [FN00] (on) BIOS EDD facility v0.16 2004-Jun-25, 0 devices found EDD information not available. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 11 ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller Driver 'sd' needs updating - please use bus_type methods sd 1:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB) /home/rafael/src/linux-2.6/drivers/usb/core/inode.c: creating file 'devices' sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 /home/rafael/src/linux-2.6/drivers/usb/core/inode.c: creating file '001' ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ohci_hcd 0000:00:02.0: irq 11, io mem 0xfebfb000 sd 1:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA hub 1-0:1.0: 3 ports detected /home/rafael/src/linux-2.6/drivers/usb/core/inode.c: creating file '001' sda:<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.28-rc9-rjw ohci_hcd usb usb1: SerialNumber: 0000:00:02.0 sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 10 ehci_hcd 0000:00:02.2: PCI INT C -> Link[LUS2] -> GSI 10 (level, low) -> IRQ 10 sda9<7>ehci_hcd 0000:00:02.2: setting latency timer to 64 ehci_hcd 0000:00:02.2: EHCI Host Controller sda10 > sd 1:0:0:0: [sda] Attached SCSI disk /home/rafael/src/linux-2.6/drivers/usb/core/inode.c: creating file '002' ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:02.2: debug port 1 ehci_hcd 0000:00:02.2: cache line size of 64 is not supported ehci_hcd 0000:00:02.2: irq 10, io mem 0xfebfdc00 ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected /home/rafael/src/linux-2.6/drivers/usb/core/inode.c: creating file '001' usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.28-rc9-rjw ehci_hcd usb usb2: SerialNumber: 0000:00:02.2 ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ohci_hcd 0000:00:02.1: PCI INT B -> Link[LUS1] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:02.1: setting latency timer to 64 ohci_hcd 0000:00:02.1: OHCI Host Controller /home/rafael/src/linux-2.6/drivers/usb/core/inode.c: creating file '003' ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.1: irq 5, io mem 0xfebfc000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected /home/rafael/src/linux-2.6/drivers/usb/core/inode.c: creating file '001' usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.28-rc9-rjw ohci_hcd usb usb3: SerialNumber: 0000:00:02.1 usb 3-1: new low speed USB device using ohci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.1/usb3/3-1/3-1:1.0/input/input4 generic-usb 0003:046D:C510.0001: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-1/input0 /home/rafael/src/linux-2.6/drivers/usb/core/inode.c: creating file '002' usb 3-1: New USB device found, idVendor=046d, idProduct=c510 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: USB Receiver usb 3-1: Manufacturer: Logitech PM: Starting manual resume from disk kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. mount used greatest stack depth: 3384 bytes left i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 ACPI: I/O resource nForce2_smbus [0x5040-0x507f] conflicts with ACPI region SMB0 [0x5040-0x507f] ACPI: Device needs an ACPI driver i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5040 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 ACPI: Battery Slot [BAT0] (battery absent) ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6 ACPI: AC Adapter [AC0] (on-line) ACPI: Sleep Button (CM) [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input7 ACPI: Lid Switch [LID] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input8 b43-pci-bridge 0000:02:02.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0 ACPI: Power Button (CM) [PWRB] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 skge 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 skge 1.13 addr 0xfeaf8000 irq 11 chip Yukon-Lite rev 7 skge eth0: addr 00:0e:a6:c4:bb:88 scsi 0:0:1:0: Attached scsi generic sg0 type 5 sd 1:0:0:0: Attached scsi generic sg1 type 0 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:1:0: Attached scsi CD-ROM sr0 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0b/device:0c/input/input9 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) IT8705 SuperIO detected. parport_pc 00:0b: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] ohci1394 0000:02:01.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[feafd000-feafd7ff] Max Packet=[2048] IR/IT contexts=[4/4] asus-laptop: Asus Laptop Support version 0.42 asus-laptop: L5D model detected ACPI: EC: non-query interrupt received, switching to interrupt mode yenta_cardbus 0000:02:01.0: CardBus bridge found [1043:1854] Registered led device: asus::mail Registered led device: asus::touchpad yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0018, PCI irq 9 yenta_cardbus 0000:02:01.0: Socket status: 30000006 yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0xb000 - 0xdfff yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xf8a00000 - 0xfeafffff yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x70000000 - 0x77ffffff yenta_cardbus 0000:02:01.1: CardBus bridge found [1043:1854] yenta_cardbus 0000:02:01.1: ISA IRQ mask 0x0018, PCI irq 11 yenta_cardbus 0000:02:01.1: Socket status: 30000006 pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07 yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge I/O window: 0xb000 - 0xdfff yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0xf8a00000 - 0xfeafffff yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0x70000000 - 0x77ffffff ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 5 Intel ICH 0000:00:06.0: PCI INT A -> Link[LAUI] -> GSI 5 (level, low) -> IRQ 5 Intel ICH 0000:00:06.0: setting latency timer to 64 intel8x0_measure_ac97_clock: measured 53290 usecs intel8x0: clocking to 48000 Intel ICH Modem 0000:00:06.1: PCI INT B -> Link[LKMO] -> GSI 10 (level, low) -> IRQ 10 Intel ICH Modem 0000:00:06.1: setting latency timer to 64 ALSA /home/rafael/src/linux-2.6/sound/pci/ac97/ac97_codec.c:2159: MC'97 1 converters and GPIO not ready (0xff00) ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000319b175] cfg80211: Calling CRDA to update world regulatory domain ppdev: user-space parallel port driver b43-phy0: Broadcom 4306 WLAN found b43-phy0 debug: Found PHY: Analog 2, Type 2, Revision 2 b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2 phy0: Selected rate control algorithm 'pid' Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ] Adding 2104504k swap on /dev/sda3. Priority:-1 extents:1 across:2104504k device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: sda9: found reiserfs format "3.6" with standard journal ReiserFS: sda9: using ordered data mode ReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda9: checking transaction log (sda9) ReiserFS: sda9: Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3 FS on sda10, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: sda7: found reiserfs format "3.6" with standard journal ReiserFS: sda7: using ordered data mode ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda7: checking transaction log (sda7) ReiserFS: sda7: Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. BIOS EDD facility v0.16 2004-Jun-25, 0 devices found EDD information not available. skge eth0: enabling interface NET: Registered protocol family 17 skge eth0: Link is up at 100 Mbps, full duplex, flow control none skge eth0: disabling interface skge eth0: enabling interface skge eth0: Link is up at 100 Mbps, full duplex, flow control none evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Marking TSC unstable due to cpufreq changes eth0: no IPv6 routers present Clocksource tsc unstable (delta = -277783814 ns)