U-Boot 2015.10-rc2-00121-g5b4a87b (Aug 31 2015 - 07:32:38 +0000) CPU: Freescale i.MX6Q rev1.2 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 42C Reset cause: POR Board: MX6-SabreSD I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 MMC: no card present MMC init failedPCI: pcie phy link never came up No panel detected: default to Hannstar-XGA Display: Hannstar-XGA (1024x768) In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 => => => setenv image b29397_ml/zImage => setenv initrd_file b29397_ml/initramfs.cpio.gz.uboot => setenv fdt_file b29397_ml/imx6q-sabresd.dtb => setenv serverip 10.192.224.44 => run netboot Booting from net ... BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 *** Unhandled DHCP Option in OFFER/ACK: 44 *** Unhandled DHCP Option in OFFER/ACK: 46 *** Unhandled DHCP Option in OFFER/ACK: 44 *** Unhandled DHCP Option in OFFER/ACK: 46 DHCP client bound to address 10.192.242.161 (1087 ms) Using FEC device TFTP from server 10.192.224.44; our IP address is 10.192.242.161; sending through gateway 10.192.242.254 Filename 'b29397_ml/zImage'. Load address: 0x12000000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################### 1.5 MiB/s done Bytes transferred = 6170248 (5e2688 hex) BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 44 *** Unhandled DHCP Option in OFFER/ACK: 46 *** Unhandled DHCP Option in OFFER/ACK: 44 *** Unhandled DHCP Option in OFFER/ACK: 46 DHCP client bound to address 10.192.242.161 (86 ms) Using FEC device TFTP from server 10.192.224.44; our IP address is 10.192.242.161; sending through gateway 10.192.242.254 Filename 'b29397_ml/imx6q-sabresd.dtb'. Load address: 0x18000000 Loading: ####### 1.3 MiB/s done Bytes transferred = 35095 (8917 hex) BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 44 *** Unhandled DHCP Option in OFFER/ACK: 46 *** Unhandled DHCP Option in OFFER/ACK: 44 *** Unhandled DHCP Option in OFFER/ACK: 46 DHCP client bound to address 10.192.242.161 (96 ms) Using FEC device TFTP from server 10.192.224.44; our IP address is 10.192.242.161; sending through gateway 10.192.242.254 Filename 'b29397_ml/initramfs.cpio.gz.uboot'. Load address: 0x18c00000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########### 1.5 MiB/s done Bytes transferred = 7377745 (709351 hex) Kernel image @ 0x12000000 [ 0x000000 - 0x5e2688 ] ## Loading init Ramdisk from Legacy Image at 18c00000 ... Image Name: fsl-image-mfgtool-initramfs-imx6 Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 7377681 Bytes = 7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800b916 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.2.0-rc6 (b29397@shlinux2) (gcc version 4.9.1 (GCC) ) #513 SMP Wed Sep 9 15:27:58 CST 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Freescale i.MX6 Quad SABRE Smart Device Board [ 0.000000] cma: Reserved 16 MiB at 0x4f000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat 80b17840, node_mem_map be7f0000 [ 0.000000] Normal zone: 2048 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 11 pages/cpu @be79a000 s14848 r8192 d22016 u45056 [ 0.000000] pcpu-alloc: s14848 r8192 d22016 u45056 alloc=11*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/nfs ip=dhcp nfsroot=10.192.224.44:,v3,tcp debug [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 995848K/1048576K available (7835K kernel code, 411K rwdata, 2672K rodata, 408K init, 8361K bss, 36344K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc0800000 - 0xff000000 (1000 MB) [ 0.000000] lowmem : 0x80000000 - 0xc0000000 (1024 MB) [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) [ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB) [ 0.000000] .text : 0x80008000 - 0x80a4b09c (10509 kB) [ 0.000000] .init : 0x80a4c000 - 0x80ab2000 ( 408 kB) [ 0.000000] .data : 0x80ab2000 - 0x80b18f20 ( 412 kB) [ 0.000000] .bss : 0x80b1b000 - 0x8134546c (8362 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000038] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001329] Console: colour dummy device 80x30 [ 0.001360] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001369] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001378] ... MAX_LOCK_DEPTH: 48 [ 0.001386] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001394] ... CLASSHASH_SIZE: 4096 [ 0.001402] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001409] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001417] ... CHAINHASH_SIZE: 32768 [ 0.001425] memory used by lock dependency info: 5167 kB [ 0.001434] per task-struct memory footprint: 1536 bytes [ 0.001461] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.001480] pid_max: default: 32768 minimum: 301 [ 0.001770] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001788] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003521] CPU: Testing write buffer coherency: ok [ 0.004399] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004499] Setting up static identity map for 0x10008280 - 0x100082f0 [ 0.009398] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.011245] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.012580] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.012803] Brought up 4 CPUs [ 0.012832] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.012843] CPU: All CPU(s) started in SVC mode. [ 0.014815] devtmpfs: initialized [ 0.043199] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.044130] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.045863] pinctrl core: initialized pinctrl subsystem [ 0.049223] NET: Registered protocol family 16 [ 0.053307] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.055452] CPU identified as i.MX6Q, silicon rev 1.2 [ 0.102852] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.102868] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.105943] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.166911] mxs-dma 110000.dma-apbh: initialized [ 0.173009] vgaarb: loaded [ 0.173963] SCSI subsystem initialized [ 0.174411] libata version 3.00 loaded. [ 0.175093] usbcore: registered new interface driver usbfs [ 0.175248] usbcore: registered new interface driver hub [ 0.175489] usbcore: registered new device driver usb [ 0.177881] i2c i2c-0: IMX I2C adapter registered [ 0.177909] i2c i2c-0: can't use DMA [ 0.178981] i2c i2c-1: IMX I2C adapter registered [ 0.179006] i2c i2c-1: can't use DMA [ 0.180139] i2c i2c-2: IMX I2C adapter registered [ 0.180163] i2c i2c-2: can't use DMA [ 0.180348] Linux video capture interface: v2.00 [ 0.180612] pps_core: LinuxPPS API ver. 1 registered [ 0.180624] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.180680] PTP clock support registered [ 0.181447] Advanced Linux Sound Architecture Driver Initialized. [ 0.184687] Bluetooth: Core ver 2.20 [ 0.184781] NET: Registered protocol family 31 [ 0.184793] Bluetooth: HCI device and connection manager initialized [ 0.184861] Bluetooth: HCI socket layer initialized [ 0.184888] Bluetooth: L2CAP socket layer initialized [ 0.185031] Bluetooth: SCO socket layer initialized [ 0.188081] clocksource: Switched to clocksource mxc_timer1 [ 0.218602] NET: Registered protocol family 2 [ 0.220327] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.220490] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.223076] TCP: Hash tables configured (established 8192 bind 8192) [ 0.223276] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.223636] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.224709] NET: Registered protocol family 1 [ 0.225867] RPC: Registered named UNIX socket transport module. [ 0.225884] RPC: Registered udp transport module. [ 0.225895] RPC: Registered tcp transport module. [ 0.225906] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.225937] PCI: CLS 0 bytes, default 64 [ 0.226668] Trying to unpack rootfs image as initramfs... [ 0.914907] Freeing initrd memory: 7208K (88c00000 - 8930a000) [ 0.916016] hw perfevents: Failed to parse /soc/pmu/interrupt-affinity[0] [ 0.916125] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.919728] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.937958] VFS: Disk quotas dquot_6.6.0 [ 0.938455] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.945739] NFS: Registering the id_resolver key type [ 0.946014] Key type id_resolver registered [ 0.946028] Key type id_legacy registered [ 0.946220] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.948413] fuse init (API version 7.23) [ 0.957526] io scheduler noop registered [ 0.957556] io scheduler deadline registered [ 0.957655] io scheduler cfq registered (default) [ 0.958492] imx-weim 21b8000.weim: Driver registered. [ 1.277619] imx6q-pcie 1ffc000.pcie: phy link never came up [ 1.278321] imx6q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00 [ 1.278344] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] [ 1.278361] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff] [ 1.278379] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.278504] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400 [ 1.278574] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 1.278614] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] [ 1.278831] pci 0000:00:00.0: supports D1 [ 1.278848] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold [ 1.279726] PCI: bus0: Fast back to back transfers disabled [ 1.280070] PCI: bus1: Fast back to back transfers enabled [ 1.280093] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.280253] pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff] [ 1.280284] pci 0000:00:00.0: BAR 6: assigned [mem 0x01100000-0x0110ffff pref] [ 1.280302] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.281039] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 1.281067] pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded [ 1.283213] backlight supply power not found, using dummy regulator [ 1.288235] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.288262] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.295641] imx-sdma 20ec000.sdma: initialized [ 1.298163] pfuze100-regulator 1-0008: Full layer: 1, Metal layer: 1 [ 1.298890] pfuze100-regulator 1-0008: FAB: 0, FIN: 0 [ 1.298907] pfuze100-regulator 1-0008: pfuze100 found. [ 1.321778] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 24, base_baud = 5000000) is a IMX [ 2.252200] console [ttymxc0] enabled [ 2.259383] [drm] Initialized drm 1.1.0 20060810 [ 2.270596] imx-ipuv3 2400000.ipu: IPUv3H probed [ 2.280099] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.286736] [drm] No driver support for vblank timestamp query. [ 2.293241] imx-drm display-subsystem: bound imx-ipuv3-crtc.0 (ops ipu_crtc_ops) [ 2.300873] imx-drm display-subsystem: bound imx-ipuv3-crtc.1 (ops ipu_crtc_ops) [ 2.308497] imx-drm display-subsystem: bound imx-ipuv3-crtc.4 (ops ipu_crtc_ops) [ 2.316090] imx-drm display-subsystem: bound imx-ipuv3-crtc.5 (ops ipu_crtc_ops) [ 2.324013] dwhdmi-imx 120000.hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1 [ 2.332424] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 2.340415] imx-drm display-subsystem: bound 2000000.aips-bus:ldb@020e0008 (ops imx_ldb_ops) [ 2.367041] Console: switching to colour frame buffer device 128x48 [ 2.379213] imx-drm display-subsystem: fb0: frame buffer device [ 2.385238] imx-drm display-subsystem: registered panic notifier [ 2.418204] [drm] Initialized imx-drm 1.0.0 20120507 on minor 0 [ 2.424821] imx-ipuv3 2800000.ipu: IPUv3H probed [ 2.452125] brd: module loaded [ 2.470458] loop: module loaded [ 2.475299] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.483287] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.491341] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.499560] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.510540] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 2.517544] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.526383] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.538855] scsi host0: ahci-imx [ 2.543295] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 295 [ 2.559194] m25p80 spi0.0: unrecognized JEDEC id bytes: 00, 0, 0 [ 2.565610] spi_imx 2008000.ecspi: probed [ 2.570485] CAN device driver interface [ 2.576168] 2188000.ethernet supply phy not found, using dummy regulator [ 2.599665] pps pps0: new PPS source ptp0 [ 2.623543] libphy: fec_enet_mii_bus: probed [ 2.629744] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.637411] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.643990] ehci-pci: EHCI PCI platform driver [ 2.648628] ehci-mxc: Freescale On-Chip EHCI Host driver [ 2.654328] usbcore: registered new interface driver usb-storage [ 2.663469] usb_otg_vbus: supplied by SWBST [ 2.676121] usb_h1_vbus: supplied by SWBST [ 2.684777] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.689933] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 2.708104] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.717711] hub 1-0:1.0: USB hub found [ 2.721846] hub 1-0:1.0: 1 port detected [ 2.730209] mousedev: PS/2 mouse device common for all mice [ 2.737406] egalax_ts 2-0004: Failed to read firmware version [ 2.743234] egalax_ts: probe of 2-0004 failed with error -11 [ 2.752243] snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc0 [ 2.760796] i2c /dev entries driver [ 2.767308] IR NEC protocol handler initialized [ 2.771985] IR RC5(x/sz) protocol handler initialized [ 2.777063] IR RC6 protocol handler initialized [ 2.781644] IR JVC protocol handler initialized [ 2.786197] IR Sony protocol handler initialized [ 2.790859] IR SANYO protocol handler initialized [ 2.795584] IR Sharp protocol handler initialized [ 2.800327] IR MCE Keyboard/mouse protocol handler initialized [ 2.806180] IR XMP protocol handler initialized [ 2.817210] coda 2040000.vpu: Direct firmware load for v4l-coda960-imx6q.bin failed with error -2 [ 2.826147] coda 2040000.vpu: firmware request failed [ 2.833138] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 2.839290] Bluetooth: HCI UART driver ver 2.3 [ 2.843754] Bluetooth: HCI UART protocol LL registered [ 2.848925] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 2.855730] sdhci: Secure Digital Host Controller Interface driver [ 2.861948] sdhci: Copyright(c) Pierre Ossman [ 2.866327] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.873320] /soc/aips-bus@02100000/usdhc@02194000: voltage-ranges unspecified [ 2.880501] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 2.889712] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 2.894889] sdhci-esdhc-imx 2194000.usdhc: Got WP GPIO [ 2.898106] ata1: SATA link down (SStatus 0 SControl 300) [ 2.898159] ahci-imx 2200000.sata: no device found, disabling link. [ 2.898167] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 2.920171] sdhci-esdhc-imx 2194000.usdhc: No vmmc regulator found [ 2.926370] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found [ 2.978943] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.987265] /soc/aips-bus@02100000/usdhc@02198000: voltage-ranges unspecified [ 2.994455] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 3.003658] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 3.008853] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO [ 3.015231] sdhci-esdhc-imx 2198000.usdhc: No vmmc regulator found [ 3.021458] sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found [ 3.068403] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.076601] /soc/aips-bus@02100000/usdhc@0219c000: voltage-ranges unspecified [ 3.085005] sdhci-esdhc-imx 219c000.usdhc: No vmmc regulator found [ 3.091230] sdhci-esdhc-imx 219c000.usdhc: No vqmmc regulator found [ 3.138104] mmc2: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA [ 3.147040] usbcore: registered new interface driver usbhid [ 3.152656] usbhid: USB HID core driver [ 3.178600] wm8962 0-001a: customer id 0 revision D [ 3.211265] input: WM8962 Beep Generator as /devices/soc0/soc/2100000.aips-bus/21a0000.i2c/i2c-0/0-001a/input/input1 [ 3.225477] imx-wm8962 sound: wm8962 <-> 202c000.ssi mapping ok [ 3.241765] NET: Registered protocol family 10 [ 3.249731] sit: IPv6 over IPv4 tunneling driver [ 3.256451] NET: Registered protocol family 17 [ 3.261004] can: controller area network core (rev 20120528 abi 9) [ 3.267372] NET: Registered protocol family 29 [ 3.271875] can: raw protocol (rev 20120528) [ 3.276276] can: broadcast manager protocol (rev 20120528 t) [ 3.282037] can: netlink gateway (rev 20130117) max_hops=1 [ 3.288339] Key type dns_resolver registered [ 3.299131] Registering SWP/SWPB emulation handler [ 3.313864] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 3.321542] snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 1970-01-01 00:38:52 UTC (2332) [ 3.346128] mmc2: MAN_BKOPS_EN bit is not set [ 3.363929] mmc2: new DDR MMC card at address 0001 [ 3.370878] mmcblk0: mmc2:0001 SEM08G 7.39 GiB [ 3.375949] mmcblk0boot0: mmc2:0001 SEM08G partition 1 2.00 MiB [ 3.382437] mmcblk0boot1: mmc2:0001 SEM08G partition 2 2.00 MiB [ 3.388663] mmcblk0rpmb: mmc2:0001 SEM08G partition 3 128 KiB [ 3.397849] mmcblk0: p1 p2 [ 3.459316] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Atheros 8031 ethernet] (mii_bus:phy_addr=2188000.ethernet:01, irq=-1) [ 3.471650] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.460168] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 6.469034] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 6.490153] Sending DHCP requests ., OK [ 6.618572] IP-Config: Got DHCP answer from 10.192.242.252, my address is 10.192.242.161 [ 6.629838] IP-Config: Complete: [ 6.633117] device=eth0, hwaddr=00:04:9f:02:6e:e0, ipaddr=10.192.242.161, mask=255.255.255.0, gw=10.192.242.254 [ 6.643728] host=10.192.242.161, domain=ap.freescale.net, nis-domain=(none) [ 6.651193] bootserver=0.0.0.0, rootserver=10.192.224.44, rootpath= [ 6.657749] nameserver0=10.192.130.201, nameserver1=10.228.49.200, nameserver2=10.201.141.100 [ 6.667199] VGEN3: disabling [ 6.672097] VGEN2: disabling [ 6.675729] VGEN1: disabling [ 6.679484] SW4: disabling [ 6.682235] wm8962-supply: disabling [ 6.685849] usb_otg_vbus: disabling [ 6.690445] ALSA device list: [ 6.693448] #0: wm8962-audio [ 6.701081] Freeing unused kernel memory: 408K (80a4c000 - 80ab2000) [ 6.707505] Failed to execute /init (error -13) sh: cannot set terminal process group (-1): Inappropriate ioctl for device sh: no job control in this shell