[ 0.000000] microcode: CPU0 microcode updated early to revision 0x1c, date = 2014-07-03 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.2.0-test+ (tux@localhost) (gcc version 5.1.1 20150713 [gcc-5-branch revision 225736] (SUSE Linux) ) #3 SMP PREEMPT Thu Sep 3 17:29:30 CEST 2015 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-test+ root=UUID=c49dd4a4-98c6-4b58-a622-0530200c9aee resume=/dev/sda1 splash=silent quiet showopts [ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aab7efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aab7f000-0x00000000abe7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000abe7f000-0x00000000abf7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000abf7f000-0x00000000abffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000abfff000-0x00000000abffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ac000000-0x00000000bf1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023edfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP EliteBook 940 G1/213E, BIOS L83 Ver. 00.62 09/06/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x23ee00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-protect [ 0.000000] 1 base 0000000000 mask 7F80000000 write-back [ 0.000000] 2 base 0080000000 mask 7FC0000000 write-back [ 0.000000] 3 base 00B8000000 mask 7FF8000000 uncachable [ 0.000000] 4 base 00B7000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back [ 0.000000] 6 base 0200000000 mask 7FC0000000 write-back [ 0.000000] 7 base 023F000000 mask 7FFF000000 uncachable [ 0.000000] 8 base 023EE00000 mask 7FFFE00000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xac000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02019000, 0x02019fff] PGTABLE [ 0.000000] BRK [0x0201a000, 0x0201afff] PGTABLE [ 0.000000] BRK [0x0201b000, 0x0201bfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23ec00000-0x23edfffff] [ 0.000000] [mem 0x23ec00000-0x23edfffff] page 2M [ 0.000000] BRK [0x0201c000, 0x0201cfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x220000000-0x23ebfffff] [ 0.000000] [mem 0x220000000-0x23ebfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff] [ 0.000000] [mem 0x200000000-0x21fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xaab7efff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xaa9fffff] page 2M [ 0.000000] [mem 0xaaa00000-0xaab7efff] page 4k [ 0.000000] init_memory_mapping: [mem 0xabfff000-0xabffffff] [ 0.000000] [mem 0xabfff000-0xabffffff] page 4k [ 0.000000] BRK [0x0201d000, 0x0201dfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G [ 0.000000] RAMDISK: [mem 0x36b5a000-0x375a4fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F2FE0 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000ABFFE120 0000AC (v01 HPQOEM SLIC-MPC 00000000 01000013) [ 0.000000] ACPI: FACP 0x00000000ABFFC000 00010C (v05 HPQOEM 213E 00000000 HP 00000001) [ 0.000000] ACPI: DSDT 0x00000000ABFD2000 0248AA (v02 HPQOEM 213E 00000001 INTL 20110112) [ 0.000000] ACPI: FACS 0x00000000ABDC4000 000040 [ 0.000000] ACPI: FACS 0x00000000ABDC4000 000040 [ 0.000000] ACPI: HPET 0x00000000ABFFB000 000038 (v01 HPQOEM 213E 00000001 HP 00000001) [ 0.000000] ACPI: APIC 0x00000000ABFFA000 0000BC (v01 HPQOEM 213E 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0x00000000ABFF9000 00003C (v01 HPQOEM 213E 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 0x00000000ABFF7000 000032 (v02 HPQOEM 213E 00000000 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000ABFCF000 000313 (v01 HPQOEM SataAhci 00001000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000ABFCE000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112) [ 0.000000] ACPI: SLIC 0x00000000ABFCD000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: FPDT 0x00000000ABFCB000 000044 (v01 HPQOEM 213E 00000001 HP 00000001) [ 0.000000] ACPI: BGRT 0x00000000ABFCA000 000038 (v00 HPQOEM 213E 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000ABFC7000 000466 (v01 Isct IsctAsl 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000ABFC6000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000ABFC5000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000ABFC4000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000ABFC3000 0006B6 (v01 SaSsdt SaSsdt 00003000 INTL 20110112) [ 0.000000] ACPI: ASF! 0x00000000ABFF8000 0000A5 (v32 HPQOEM 213E 00000001 HP 00000001) [ 0.000000] ACPI: DMAR 0x00000000ABFC2000 0000B0 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023edfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x23edea000-0x23edfdfff] [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236800000-ffff88023e3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000023edfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000aab7efff] [ 0.000000] node 0: [mem 0x00000000abfff000-0x00000000abffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023edfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023edfffff] [ 0.000000] On node 0 totalpages: 2005276 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10862 pages used for memmap [ 0.000000] DMA32 zone: 695168 pages, LIFO batch:31 [ 0.000000] Normal zone: 20408 pages used for memmap [ 0.000000] Normal zone: 1306112 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xb7200000-0xbf1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xaab7f000-0xabe7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xabe7f000-0xabf7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xabf7f000-0xabffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xac000000-0xbf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf200000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff] [ 0.000000] e820: [mem 0xbf200000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88023ea00000 s93080 r8192 d29800 u262144 [ 0.000000] pcpu-alloc: s93080 r8192 d29800 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1973921 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-test+ root=UUID=c49dd4a4-98c6-4b58-a622-0530200c9aee resume=/dev/sda1 splash=silent quiet showopts [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 229376 bytes [ 0.000000] log_buf_len min size: 262144 bytes [ 0.000000] log_buf_len: 524288 bytes [ 0.000000] early log buf free: 249056(95%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 7799068K/8021104K available (6681K kernel code, 1091K rwdata, 3148K rodata, 1548K init, 1520K bss, 222036K reserved, 0K cma-reserved) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:33024 nr_irqs:760 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2494.307 MHz processor [ 0.000037] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.61 BogoMIPS (lpj=2494307) [ 0.000040] pid_max: default: 32768 minimum: 301 [ 0.000048] ACPI: Core revision 20150619 [ 0.027577] ACPI: All ACPI Tables successfully acquired [ 0.027613] Security Framework initialized [ 0.027619] AppArmor: AppArmor initialized [ 0.028282] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.030295] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.031159] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.031172] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.031433] Initializing cgroup subsys blkio [ 0.031436] Initializing cgroup subsys memory [ 0.031447] Initializing cgroup subsys devices [ 0.031450] Initializing cgroup subsys freezer [ 0.031452] Initializing cgroup subsys net_cls [ 0.031455] Initializing cgroup subsys perf_event [ 0.031458] Initializing cgroup subsys net_prio [ 0.031460] Initializing cgroup subsys hugetlb [ 0.031500] CPU: Physical Processor ID: 0 [ 0.031501] CPU: Processor Core ID: 0 [ 0.031506] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.031507] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.032642] mce: CPU supports 7 MCE banks [ 0.032656] CPU0: Thermal monitoring enabled (TM1) [ 0.032666] process: using mwait in idle threads [ 0.032669] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.032670] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.032793] Freeing SMP alternatives memory: 24K (ffffffff81e95000 - ffffffff81e9b000) [ 0.049122] ftrace: allocating 25542 entries in 100 pages [ 0.062464] DMAR: Host address width 39 [ 0.062467] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.062474] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.062476] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.062481] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.062483] DMAR: RMRR base: 0x000000abe0f000 end: 0x000000abe2efff [ 0.062484] DMAR: RMRR base: 0x000000b7000000 end: 0x000000bf1fffff [ 0.062487] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1 [ 0.062488] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.062490] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.062895] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.062897] x2apic enabled [ 0.062903] Switched APIC routing to cluster x2apic. [ 0.063547] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.073566] TSC deadline timer enabled [ 0.073570] smpboot: CPU0: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz (fam: 06, model: 45, stepping: 01) [ 0.073600] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.073625] ... version: 3 [ 0.073626] ... bit width: 48 [ 0.073627] ... generic registers: 4 [ 0.073628] ... value mask: 0000ffffffffffff [ 0.073629] ... max period: 0000ffffffffffff [ 0.073630] ... fixed-purpose events: 3 [ 0.073631] ... event mask: 000000070000000f [ 0.077737] x86: Booting SMP configuration: [ 0.077740] .... node #0, CPUs: #1 [ 0.082200] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.083185] #2 [ 0.085640] microcode: CPU2 microcode updated early to revision 0x1c, date = 2014-07-03 [ 0.090035] #3 [ 0.094381] x86: Booted up 1 node, 4 CPUs [ 0.094384] smpboot: Total of 4 processors activated (19954.45 BogoMIPS) [ 0.099046] devtmpfs: initialized [ 0.102126] PM: Registering ACPI NVS region [mem 0xabe7f000-0xabf7efff] (1048576 bytes) [ 0.102265] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.102374] pinctrl core: initialized pinctrl subsystem [ 0.102423] RTC time: 15:31:37, date: 09/03/15 [ 0.102582] NET: Registered protocol family 16 [ 0.104858] cpuidle: using governor ladder [ 0.106868] cpuidle: using governor menu [ 0.106955] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.106957] ACPI: bus type PCI registered [ 0.106959] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.107027] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.107029] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.107043] PCI: Using configuration type 1 for base access [ 0.107362] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.107366] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.107367] mtrr: probably your BIOS does not setup all CPUs. [ 0.107368] mtrr: corrected configuration. [ 0.111311] ACPI: Added _OSI(Module Device) [ 0.111314] ACPI: Added _OSI(Processor Device) [ 0.111315] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.111317] ACPI: Added _OSI(Processor Aggregator Device) [ 0.129871] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.420677] ACPI: Dynamic OEM Table Load: [ 0.420689] ACPI: SSDT 0xFFFF880235225400 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) [ 0.421879] ACPI: Dynamic OEM Table Load: [ 0.421890] ACPI: SSDT 0xFFFF880235236800 0005DB (v01 PmRef ApIst 00003000 INTL 20110112) [ 0.423159] ACPI: Dynamic OEM Table Load: [ 0.423167] ACPI: SSDT 0xFFFF880234DBBC00 000119 (v01 PmRef ApCst 00003000 INTL 20110112) [ 0.425151] ACPI : EC: EC started [ 0.858207] ACPI: Interpreter enabled [ 0.858217] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580) [ 0.858224] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580) [ 0.858245] ACPI: (supports S0 S3 S4 S5) [ 0.858247] ACPI: Using IOAPIC for interrupt routing [ 0.858282] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.861643] ACPI: Power Resource [APPR] (off) [ 0.864679] ACPI: Power Resource [COMP] (on) [ 0.864983] ACPI: Power Resource [LPP] (on) [ 0.866084] ACPI: Power Resource [PXP2] (on) [ 0.974410] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.974418] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.977766] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.977769] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.978648] PCI host bridge to bus 0000:00 [ 0.978651] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.978654] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.978656] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.978658] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.978660] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff window] [ 0.978662] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window] [ 0.978664] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window] [ 0.978672] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 0.978850] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 [ 0.978866] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit] [ 0.978874] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.978880] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.979068] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 0.979083] pci 0000:00:03.0: reg 0x10: [mem 0xd0730000-0xd0733fff 64bit] [ 0.979267] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 0.979291] pci 0000:00:14.0: reg 0x10: [mem 0xd0720000-0xd072ffff 64bit] [ 0.979337] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.979440] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.979493] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 0.979522] pci 0000:00:16.0: reg 0x10: [mem 0xd0739000-0xd073901f 64bit] [ 0.979586] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.979728] pci 0000:00:16.3: [8086:9c3d] type 00 class 0x070002 [ 0.979757] pci 0000:00:16.3: reg 0x10: [io 0x30b0-0x30b7] [ 0.979766] pci 0000:00:16.3: reg 0x14: [mem 0xd073f000-0xd073ffff] [ 0.979962] pci 0000:00:19.0: [8086:155a] type 00 class 0x020000 [ 0.979985] pci 0000:00:19.0: reg 0x10: [mem 0xd0700000-0xd071ffff] [ 0.979993] pci 0000:00:19.0: reg 0x14: [mem 0xd073e000-0xd073efff] [ 0.980001] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 0.980051] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.980154] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.980203] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 0.980228] pci 0000:00:1b.0: reg 0x10: [mem 0xd0734000-0xd0737fff 64bit] [ 0.980289] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.980434] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400 [ 0.980501] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.980718] pci 0000:00:1c.1: [8086:9c12] type 01 class 0x060400 [ 0.980791] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.981004] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400 [ 0.981073] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.981241] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.981295] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 0.981321] pci 0000:00:1d.0: reg 0x10: [mem 0xd073d000-0xd073d3ff] [ 0.981385] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.981494] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.981544] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 [ 0.981799] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 0.981819] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] [ 0.981827] pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf] [ 0.981834] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] [ 0.981841] pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb] [ 0.981848] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.981856] pci 0000:00:1f.2: reg 0x24: [mem 0xd073c000-0xd073c7ff] [ 0.981886] pci 0000:00:1f.2: PME# supported from D3hot [ 0.982027] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 0.982043] pci 0000:00:1f.3: reg 0x10: [mem 0xd0738000-0xd07380ff 64bit] [ 0.982063] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f] [ 0.982261] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.982266] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff] [ 0.982329] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000 [ 0.982365] pci 0000:02:00.0: reg 0x10: [mem 0xd0500000-0xd0500fff] [ 0.982483] pci 0000:02:00.0: supports D1 D2 [ 0.982484] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.984764] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.984769] pci 0000:00:1c.1: bridge window [mem 0xd0500000-0xd05fffff] [ 0.985088] pci 0000:03:00.0: [8086:095a] type 00 class 0x028000 [ 0.985203] pci 0000:03:00.0: reg 0x10: [mem 0xd0400000-0xd0401fff 64bit] [ 0.985607] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.985698] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.988041] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.988046] pci 0000:00:1c.3: bridge window [mem 0xd0400000-0xd04fffff] [ 0.989612] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.989694] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.989772] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.989849] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.989931] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.990007] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.990084] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.990160] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.990629] ACPI: Enabled 5 GPEs in block 00 to 7F [ 0.990688] ACPI : EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62 [ 0.990779] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.990781] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.990785] vgaarb: loaded [ 0.990786] vgaarb: bridge control possible 0000:00:02.0 [ 0.990918] SCSI subsystem initialized [ 0.990973] libata version 3.00 loaded. [ 0.990980] ACPI: bus type USB registered [ 0.991005] usbcore: registered new interface driver usbfs [ 0.991017] usbcore: registered new interface driver hub [ 0.991039] usbcore: registered new device driver usb [ 0.991144] PCI: Using ACPI for IRQ routing [ 0.996846] PCI: pci_cache_line_size set to 64 bytes [ 0.997169] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 0.997171] e820: reserve RAM buffer [mem 0xaab7f000-0xabffffff] [ 0.997173] e820: reserve RAM buffer [mem 0x23ee00000-0x23fffffff] [ 0.997319] NetLabel: Initializing [ 0.997321] NetLabel: domain hash size = 128 [ 0.997322] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.997337] NetLabel: unlabeled traffic allowed by default [ 0.997384] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.997390] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.999427] clocksource: Switched to clocksource hpet [ 1.007446] AppArmor: AppArmor Filesystem Enabled [ 1.007513] pnp: PnP ACPI init [ 1.007851] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.007854] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved [ 1.007856] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.007859] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.007861] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 1.007863] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.007865] system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved [ 1.007867] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.007869] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.007872] system 00:00: [mem 0xbf210000-0xbf21ffff] has been reserved [ 1.007876] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.008107] system 00:01: [io 0x0200-0x027f] has been reserved [ 1.008110] system 00:01: [io 0xffff] has been reserved [ 1.008115] system 00:01: [io 0xffff] has been reserved [ 1.008117] system 00:01: [io 0xffff] has been reserved [ 1.008119] system 00:01: [io 0x1800-0x18fe] could not be reserved [ 1.008121] system 00:01: [io 0xef80-0xef9f] has been reserved [ 1.008124] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.008187] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.008480] pnp 00:03: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 1.008511] pnp 00:04: Plug and Play ACPI device, IDs SYN300d SYN0100 SYN0002 PNP0f13 (active) [ 1.008942] system 00:05: [mem 0x20000000-0x201fffff] could not be reserved [ 1.008945] system 00:05: [mem 0x40004000-0x40004fff] could not be reserved [ 1.008948] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.009298] pnp 00:06: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 1.009325] pnp: PnP ACPI: found 7 devices [ 1.015969] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.015992] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 1.015996] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 1.016007] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 1.016009] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 1.016012] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 1.016013] pci 0000:00:1c.1: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 1.016022] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbf300000-0xbf4fffff 64bit pref] [ 1.016025] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] [ 1.016028] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.016033] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff] [ 1.016040] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 1.016043] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 1.016047] pci 0000:00:1c.1: bridge window [mem 0xd0500000-0xd05fffff] [ 1.016051] pci 0000:00:1c.1: bridge window [mem 0xbf300000-0xbf4fffff 64bit pref] [ 1.016056] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 1.016061] pci 0000:00:1c.3: bridge window [mem 0xd0400000-0xd04fffff] [ 1.016069] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.016071] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.016073] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.016075] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff window] [ 1.016077] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window] [ 1.016078] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window] [ 1.016080] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff] [ 1.016082] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 1.016084] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff] [ 1.016086] pci_bus 0000:02: resource 2 [mem 0xbf300000-0xbf4fffff 64bit pref] [ 1.016088] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff] [ 1.016153] NET: Registered protocol family 2 [ 1.016352] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.016532] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.016673] TCP: Hash tables configured (established 65536 bind 65536) [ 1.016703] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.016734] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.016839] NET: Registered protocol family 1 [ 1.016857] pci 0000:00:02.0: Video device with shadowed ROM [ 1.016865] pci 0000:00:14.0: enabling device (0000 -> 0002) [ 1.017264] pci 0000:00:1d.0: enabling device (0000 -> 0002) [ 1.017750] PCI: CLS 64 bytes, default 64 [ 1.017809] Unpacking initramfs... [ 2.379451] Freeing initrd memory: 10540K (ffff880036b5a000 - ffff8800375a5000) [ 2.379478] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.379481] software IO TLB [mem 0xa6b7f000-0xaab7f000] (64MB) mapped at [ffff8800a6b7f000-ffff8800aab7efff] [ 2.379563] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 2.379565] hw unit of domain pp0-core 2^-14 Joules [ 2.379566] hw unit of domain package 2^-14 Joules [ 2.379567] hw unit of domain dram 2^-14 Joules [ 2.379568] hw unit of domain pp1-gpu 2^-14 Joules [ 2.379615] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than reserved [mem 0xfed10000-0xfed13fff] [ 2.379616] ------------[ cut here ]------------ [ 2.379622] WARNING: CPU: 0 PID: 1 at arch/x86/mm/ioremap.c:198 __ioremap_caller+0x2de/0x360() [ 2.379624] Info: mapping multiple BARs. Your kernel is fine. [ 2.379625] Modules linked in: [ 2.379629] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.2.0-test+ #3 [ 2.379631] Hardware name: Hewlett-Packard HP EliteBook 940 G1/213E, BIOS L83 Ver. 00.62 09/06/2013 [ 2.379633] ffffffff81a21c5b ffff8802355bbab8 ffffffff8167b71b 0000000000000001 [ 2.379636] ffff8802355bbb08 ffff8802355bbaf8 ffffffff81068146 ffffc90000e95fff [ 2.379639] 0000000000006000 ffffc90000e90000 00000000fed10000 0000000000000000 [ 2.379641] Call Trace: [ 2.379647] [] dump_stack+0x4c/0x6e [ 2.379652] [] warn_slowpath_common+0x86/0xc0 [ 2.379654] [] warn_slowpath_fmt+0x46/0x50 [ 2.379657] [] __ioremap_caller+0x2de/0x360 [ 2.379661] [] ioremap_nocache+0x17/0x20 [ 2.379664] [] snb_uncore_imc_init_box+0x6a/0x90 [ 2.379666] [] uncore_pci_probe+0xd6/0x210 [ 2.379670] [] local_pci_probe+0x45/0xa0 [ 2.379674] [] ? pci_match_device+0xe0/0x110 [ 2.379677] [] pci_device_probe+0xd1/0x120 [ 2.379681] [] driver_probe_device+0x1f4/0x460 [ 2.379683] [] __driver_attach+0x90/0xa0 [ 2.379686] [] ? driver_probe_device+0x460/0x460 [ 2.379688] [] bus_for_each_dev+0x64/0xa0 [ 2.379690] [] driver_attach+0x1e/0x20 [ 2.379693] [] bus_add_driver+0x1eb/0x280 [ 2.379696] [] ? uncore_cpu_setup+0x12/0x12 [ 2.379698] [] driver_register+0x60/0xe0 [ 2.379701] [] __pci_register_driver+0x4c/0x50 [ 2.379704] [] intel_uncore_init+0xd2/0x2b9 [ 2.379706] [] ? uncore_cpu_setup+0x12/0x12 [ 2.379708] [] do_one_initcall+0xb3/0x200 [ 2.379713] [] ? parse_args+0x271/0x4a0 [ 2.379716] [] kernel_init_freeable+0x183/0x20e [ 2.379720] [] ? rest_init+0x90/0x90 [ 2.379722] [] kernel_init+0xe/0xe0 [ 2.379726] [] ret_from_fork+0x3f/0x70 [ 2.379728] [] ? rest_init+0x90/0x90 [ 2.379733] ---[ end trace 7775cc7f83c84325 ]--- [ 2.379815] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c [ 2.379824] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c [ 2.379834] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c [ 2.379843] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c [ 2.379907] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 2.380016] Scanning for low memory corruption every 60 seconds [ 2.380412] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 2.380464] audit: initializing netlink subsys (disabled) [ 2.380481] audit: type=2000 audit(1441294299.346:1): initialized [ 2.380866] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.380904] zpool: loaded [ 2.380908] zbud: loaded [ 2.381099] VFS: Disk quotas dquot_6.6.0 [ 2.381120] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.381362] Key type big_key registered [ 2.381647] Key type asymmetric registered [ 2.381652] Asymmetric key parser 'x509' registered [ 2.381677] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 2.381728] io scheduler noop registered [ 2.381733] io scheduler deadline registered [ 2.381749] io scheduler cfq registered (default) [ 2.382635] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 2.382640] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 2.382664] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 2.382666] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 2.382669] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 2.382693] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 2.382694] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 2.382698] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 2.382705] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.382717] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 2.382752] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded [ 2.382758] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.382783] vesafb: mode is 1600x900x32, linelength=6400, pages=0 [ 2.382784] vesafb: scrolling: redraw [ 2.382786] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.382798] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90001000000, using 5632k, total 5632k [ 2.532323] Console: switching to colour frame buffer device 200x56 [ 2.681397] fb0: VESA VGA frame buffer device [ 2.681419] intel_idle: MWAIT substates: 0x11142120 [ 2.681421] intel_idle: v0.4 model 0x45 [ 2.681422] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.681749] GHES: HEST is not enabled! [ 2.681803] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled [ 2.704008] 0000:00:16.3: ttyS4 at I/O 0x30b0 (irq = 19, base_baud = 115200) is a 16550A [ 2.704295] Non-volatile memory driver v1.3 [ 2.704372] Linux agpgart interface v0.103 [ 2.704906] ahci 0000:00:1f.2: version 3.0 [ 2.715333] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x8 impl SATA mode [ 2.715337] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 2.715946] scsi host0: ahci [ 2.716079] scsi host1: ahci [ 2.716205] scsi host2: ahci [ 2.716335] scsi host3: ahci [ 2.716391] ata1: DUMMY [ 2.716392] ata2: DUMMY [ 2.716393] ata3: DUMMY [ 2.716396] ata4: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c280 irq 45 [ 2.716425] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.716433] ehci-pci: EHCI PCI platform driver [ 2.716651] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.716658] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 2.716671] ehci-pci 0000:00:1d.0: debug port 2 [ 2.720589] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.720608] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd073d000 [ 2.726348] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.726395] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.726397] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.726399] usb usb1: Product: EHCI Host Controller [ 2.726401] usb usb1: Manufacturer: Linux 4.2.0-test+ ehci_hcd [ 2.726402] usb usb1: SerialNumber: 0000:00:1d.0 [ 2.726566] hub 1-0:1.0: USB hub found [ 2.726572] hub 1-0:1.0: 3 ports detected [ 2.726767] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.726773] uhci_hcd: USB Universal Host Controller Interface driver [ 2.726835] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.728040] i8042: Detected active multiplexing controller, rev 1.1 [ 2.728647] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.728687] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 2.728720] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 2.728751] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 2.728782] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 2.728943] mousedev: PS/2 mouse device common for all mice [ 2.729076] rtc_cmos 00:02: RTC can wake from S4 [ 2.729237] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.729268] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.729285] Intel P-state driver initializing. [ 2.729462] ledtrig-cpu: registered to indicate activity on CPUs [ 2.729515] hidraw: raw HID events driver (C) Jiri Kosina [ 2.729840] usbcore: registered new interface driver usbhid [ 2.729843] usbhid: USB HID core driver [ 2.730125] NET: Registered protocol family 10 [ 2.731592] registered taskstats version 1 [ 2.731641] zswap: loading zswap [ 2.731646] zswap: using zbud pool [ 2.731653] zswap: using lzo compressor [ 2.741171] Key type encrypted registered [ 2.741191] AppArmor: AppArmor sha1 policy hashing enabled [ 2.742521] Magic number: 15:311:537 [ 2.742549] tty ttyS17: hash matches [ 2.742719] rtc_cmos 00:02: setting system clock to 2015-09-03 15:31:39 UTC (1441294299) [ 2.742915] PM: Checking hibernation image partition /dev/sda1 [ 2.753941] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 3.021719] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.024322] ata4.00: ATA-8: LITEONIT L8T-128L6G-HP, D871701, max UDMA/133 [ 3.024326] ata4.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 3.024910] ata4.00: configured for UDMA/133 [ 3.025077] scsi 3:0:0:0: Direct-Access ATA LITEONIT L8T-128 701 PQ: 0 ANSI: 5 [ 3.025307] sd 3:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 3.025428] sd 3:0:0:0: [sda] Write Protect is off [ 3.025432] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.025467] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.025966] sda: sda1 sda2 sda3 [ 3.026284] sd 3:0:0:0: [sda] Attached SCSI disk [ 3.028671] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.143297] usb 1-1: New USB device found, idVendor=8087, idProduct=8000 [ 3.143302] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.143706] hub 1-1:1.0: USB hub found [ 3.143921] hub 1-1:1.0: 8 ports detected [ 3.382085] tsc: Refined TSC clocksource calibration: 2494.225 MHz [ 3.382091] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3ea95b09, max_idle_ns: 440795287034 ns [ 3.537478] psmouse serio3: synaptics: queried max coordinates: x [..5676], y [..4690] [ 3.570549] psmouse serio3: synaptics: queried min coordinates: x [1266..], y [1162..] [ 3.627866] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2a1, caps: 0xd40123/0x840300/0x126800/0x0, board id: 2685, fw id: 1485712 [ 3.664330] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input7 [ 3.668133] PM: Hibernation image partition 8:1 present [ 3.668136] PM: Looking for hibernation image. [ 3.670475] PM: Image not found (code -22) [ 3.670479] PM: Hibernation image not present or could not be loaded. [ 3.670866] Freeing unused kernel memory: 1548K (ffffffff81d12000 - ffffffff81e95000) [ 3.670868] Write protecting the kernel read-only data: 12288k [ 3.671283] Freeing unused kernel memory: 1500K (ffff880001689000 - ffff880001800000) [ 3.671522] Freeing unused kernel memory: 948K (ffff880001b13000 - ffff880001c00000) [ 3.673637] random: systemd urandom read with 8 bits of entropy available [ 3.674129] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN) [ 3.674236] systemd[1]: Detected architecture 'x86-64'. [ 3.674239] systemd[1]: Running in initial RAM disk. [ 3.674254] systemd[1]: No hostname configured. [ 3.674257] systemd[1]: Set hostname to . [ 3.705291] systemd[1]: Unit type .busname is not supported on this system. [ 3.708856] systemd[1]: Created slice -.slice. [ 3.708864] systemd[1]: Starting -.slice. [ 3.708911] systemd[1]: Created slice System Slice. [ 3.708917] systemd[1]: Starting System Slice. [ 3.708925] systemd[1]: Reached target Swap. [ 3.708929] systemd[1]: Starting Swap. [ 3.708957] systemd[1]: Listening on Journal Socket. [ 3.708963] systemd[1]: Starting Journal Socket. [ 3.709285] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 3.709348] systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice. [ 3.709356] systemd[1]: Starting system-systemd\x2dhibernate\x2dresume.slice. [ 3.709770] systemd[1]: Starting Load Kernel Modules... [ 3.709804] systemd[1]: Listening on udev Kernel Socket. [ 3.709813] systemd[1]: Starting udev Kernel Socket. [ 3.709845] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.709851] systemd[1]: Starting Journal Socket (/dev/log). [ 3.709872] systemd[1]: Listening on Journal Audit Socket. [ 3.709877] systemd[1]: Starting Journal Audit Socket. [ 3.710211] systemd[1]: Starting Journal Service... [ 3.710398] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 3.710417] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 3.710431] systemd[1]: Reached target Slices. [ 3.710436] systemd[1]: Starting Slices. [ 3.710469] systemd[1]: Listening on udev Control Socket. [ 3.710475] systemd[1]: Starting udev Control Socket. [ 3.710485] systemd[1]: Reached target Sockets. [ 3.710490] systemd[1]: Starting Sockets. [ 3.710527] systemd[1]: Started dracut ask for additional cmdline parameters. [ 3.710945] systemd[1]: Starting dracut cmdline hook... [ 3.710967] systemd[1]: Reached target Timers. [ 3.710977] systemd[1]: Starting Timers. [ 3.711481] systemd[1]: Starting Setup Virtual Console... [ 3.712598] systemd-journald[132]: Failed to set file attributes: Inappropriate ioctl for device [ 3.717468] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 3.717539] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 3.717615] audit: type=1130 audit(1441294300.472:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.717869] systemd[1]: Started Load Kernel Modules. [ 3.717892] audit: type=1130 audit(1441294300.472:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.719379] systemd[1]: Started Apply Kernel Variables. [ 3.720531] systemd[1]: Starting Create Static Device Nodes in /dev... [ 3.724726] systemd[1]: Started Create Static Device Nodes in /dev. [ 3.724766] audit: type=1130 audit(1441294300.479:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.729573] systemd[1]: Started Setup Virtual Console. [ 3.729609] audit: type=1130 audit(1441294300.484:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.732221] systemd[1]: Started Journal Service. [ 3.732293] audit: type=1130 audit(1441294300.486:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.795224] audit: type=1130 audit(1441294300.549:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.819411] audit: type=1130 audit(1441294300.573:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.823151] audit: type=1130 audit(1441294300.577:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.833583] audit: type=1130 audit(1441294300.588:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.847338] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input9 [ 3.847396] ACPI: Sleep Button [SLPB] [ 3.847470] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input10 [ 3.847690] ACPI: Lid Switch [LID] [ 3.847760] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11 [ 3.847807] ACPI: Power Button [PWRF] [ 3.864283] pps_core: LinuxPPS API ver. 1 registered [ 3.864288] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.864597] PTP clock support registered [ 3.865672] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k [ 3.865674] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.865926] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.866793] [drm] Initialized drm 1.1.0 20060810 [ 3.875460] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 47 [ 3.919058] PM: Starting manual resume from disk [ 3.919064] PM: Hibernation image partition 8:1 present [ 3.919065] PM: Looking for hibernation image. [ 3.919141] PM: Image not found (code -22) [ 3.919143] PM: Hibernation image not present or could not be loaded. [ 4.033772] e1000e 0000:00:19.0 eth0: registered PHC clock [ 4.033776] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 10:1f:74:5c:33:09 [ 4.033778] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 4.033801] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 4.034046] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.034055] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 4.034130] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000b810 [ 4.034136] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 4.034231] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.034234] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.034236] usb usb2: Product: xHCI Host Controller [ 4.034238] usb usb2: Manufacturer: Linux 4.2.0-test+ xhci-hcd [ 4.034240] usb usb2: SerialNumber: 0000:00:14.0 [ 4.034435] hub 2-0:1.0: USB hub found [ 4.034450] hub 2-0:1.0: 9 ports detected [ 4.034556] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 4.035069] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.035072] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 4.035099] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.035101] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.035102] usb usb3: Product: xHCI Host Controller [ 4.035103] usb usb3: Manufacturer: Linux 4.2.0-test+ xhci-hcd [ 4.035104] usb usb3: SerialNumber: 0000:00:14.0 [ 4.035238] hub 3-0:1.0: USB hub found [ 4.035245] hub 3-0:1.0: 4 ports detected [ 4.035461] usb: failed to peer usb3-port4 and usb2-port1 by location (usb3-port4:none) (usb2-port1:usb3-port1) [ 4.035463] usb usb3-port4: failed to peer to usb2-port1 (-16) [ 4.035463] usb: port power management may be unreliable [ 4.036215] [drm] Memory usable by graphics device = 2048M [ 4.036219] checking generic (c0000000 580000) vs hw (c0000000 10000000) [ 4.036221] fb: switching to inteldrmfb from VESA VGA [ 4.036251] Console: switching to colour dummy device 80x25 [ 4.036343] [drm] Replacing VGA console driver [ 4.041926] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.041929] [drm] Driver supports precise vblank timestamp query. [ 4.042053] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.074211] fbcon: inteldrmfb (fb0) is primary device [ 4.074325] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.074653] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12 [ 4.074732] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0 [ 4.347225] usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd [ 4.358611] usb 3-1: New USB device found, idVendor=0424, idProduct=5534 [ 4.358613] usb 3-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 4.358614] usb 3-1: Product: USB5534B [ 4.358616] usb 3-1: Manufacturer: SMSC [ 4.359602] hub 3-1:1.0: USB hub found [ 4.359641] hub 3-1:1.0: 4 ports detected [ 4.383371] clocksource: Switched to clocksource tsc [ 4.388237] usb 2-1: new high-speed USB device number 2 using xhci_hcd [ 4.553011] usb 2-1: New USB device found, idVendor=0424, idProduct=2134 [ 4.553013] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.553014] usb 2-1: Product: USB2134B [ 4.553015] usb 2-1: Manufacturer: SMSC [ 4.553446] hub 2-1:1.0: USB hub found [ 4.553515] hub 2-1:1.0: 4 ports detected [ 4.707589] usb 2-4: new full-speed USB device number 3 using xhci_hcd [ 4.872745] usb 2-4: not running at top speed; connect to a high speed hub [ 4.873460] usb 2-4: New USB device found, idVendor=8087, idProduct=0a2a [ 4.873462] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.026937] usb 2-5: new full-speed USB device number 4 using xhci_hcd [ 5.121775] Console: switching to colour frame buffer device 200x56 [ 5.124847] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 5.124848] i915 0000:00:02.0: registered panic notifier [ 5.151035] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.192470] usb 2-5: New USB device found, idVendor=138a, idProduct=003f [ 5.192475] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 5.192477] usb 2-5: SerialNumber: 00208e0f3790 [ 5.265208] systemd-journald[132]: Received SIGTERM from PID 1 (systemd). [ 5.346227] usb 2-6: new high-speed USB device number 5 using xhci_hcd [ 5.352841] systemd-sysv-generator[406]: Overwriting existing symlink /run/systemd/generator.late/pppoe.service with real service [ 5.352870] systemd-sysv-generator[406]: Overwriting existing symlink /run/systemd/generator.late/rpmconfigcheck.service with real service [ 5.352888] systemd-sysv-generator[406]: Overwriting existing symlink /run/systemd/generator.late/raw.service with real service [ 5.352904] systemd-sysv-generator[406]: Overwriting existing symlink /run/systemd/generator.late/cifs.service with real service [ 5.352918] systemd-sysv-generator[406]: Overwriting existing symlink /run/systemd/generator.late/halt.local.service with real service [ 5.352934] systemd-sysv-generator[406]: Overwriting existing symlink /run/systemd/generator.late/local.service with real service [ 5.352948] systemd-sysv-generator[406]: Overwriting existing symlink /run/systemd/generator.late/after.local.service with real service [ 5.442660] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr [ 5.512349] usb 2-6: New USB device found, idVendor=03f0, idProduct=521d [ 5.512352] usb 2-6: New USB device strings: Mfr=5, Product=4, SerialNumber=0 [ 5.512353] usb 2-6: Product: HP hs3110 HSPA+ Mobile Broadband Device [ 5.512355] usb 2-6: Manufacturer: Hewlett-Packard [ 5.569420] ACPI: AC Adapter [AC] (on-line) [ 5.572304] Initializing HPQ6001 module [ 5.572384] input: HP Wireless hotkeys as /devices/virtual/input/input13 [ 5.595998] systemd-journald[454]: Received request to flush runtime journal from PID 1 [ 5.621600] ACPI: Battery Slot [BAT0] (battery present) [ 5.633451] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.642482] thermal LNXTHERM:00: registered as thermal_zone0 [ 5.642487] ACPI: Thermal Zone [CPUZ] (53 C) [ 5.656167] wmi: Mapper loaded [ 5.664808] ACPI Warning: SystemIO range 0x000000000000EF80-0x000000000000EF9F conflicts with OpRegion 0x000000000000EF80-0x000000000000EF8F (\_SB_.PCI0.SBUS.SMBI) (20150619/utaddress-254) [ 5.664816] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.666780] usb 2-7: new high-speed USB device number 6 using xhci_hcd [ 5.667543] thermal LNXTHERM:01: registered as thermal_zone1 [ 5.667547] ACPI: Thermal Zone [GFXZ] (0 C) [ 5.672630] mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1 [ 5.680306] tpm_tis 00:06: 1.2 TPM (device-id 0xB, rev-id 16) [ 5.683567] thermal LNXTHERM:02: registered as thermal_zone2 [ 5.683571] ACPI: Thermal Zone [EXTZ] (40 C) [ 5.698714] thermal LNXTHERM:03: registered as thermal_zone3 [ 5.698718] ACPI: Thermal Zone [LOCZ] (39 C) [ 5.702637] device-mapper: uevent: version 1.0.3 [ 5.702707] device-mapper: ioctl: 4.32.0-ioctl (2015-6-26) initialised: dm-devel@redhat.com [ 5.717076] thermal LNXTHERM:04: registered as thermal_zone4 [ 5.717081] ACPI: Thermal Zone [BATZ] (34 C) [ 5.718354] AVX2 version of gcm_enc/dec engaged. [ 5.718357] AES CTR mode by8 optimization enabled [ 5.719017] thermal LNXTHERM:05: registered as thermal_zone5 [ 5.719021] ACPI: Thermal Zone [PCHZ] (114 C) [ 5.739403] Intel(R) Wireless WiFi driver for Linux [ 5.739406] Copyright(c) 2003- 2015 Intel Corporation [ 5.743940] iTCO_vendor_support: vendor-support=0 [ 5.746170] ppdev: user-space parallel port driver [ 5.746263] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265-15.ucode failed with error -2 [ 5.746278] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265-14.ucode failed with error -2 [ 5.746665] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 5.746706] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 5.746773] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.757652] iwlwifi 0000:03:00.0: loaded firmware version 25.30.13.0 op_mode iwlmvm [ 5.762065] cfg80211: World regulatory domain updated: [ 5.762069] cfg80211: DFS Master region: unset [ 5.762070] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 5.762073] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 5.762075] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 5.762076] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 5.762078] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 5.762080] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 5.762082] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 5.762083] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 5.762085] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 5.763871] nfc: nfc_init: NFC Core ver 0.1 [ 5.763895] NET: Registered protocol family 39 [ 5.776617] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 5.787888] Probing NFC pn544 [ 5.799414] snd_hda_codec_idt hdaudioC1D0: autoconfig for 92HD91BXX: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line [ 5.799419] snd_hda_codec_idt hdaudioC1D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 5.799422] snd_hda_codec_idt hdaudioC1D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 5.799424] snd_hda_codec_idt hdaudioC1D0: mono: mono_out=0x0 [ 5.799426] snd_hda_codec_idt hdaudioC1D0: inputs: [ 5.799429] snd_hda_codec_idt hdaudioC1D0: Mic=0xc [ 5.799431] snd_hda_codec_idt hdaudioC1D0: Internal Mic=0x11 [ 5.799433] snd_hda_codec_idt hdaudioC1D0: Line=0xf [ 5.803613] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 5.803820] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 5.803925] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 [ 5.820797] tpm_tis 00:06: TPM is disabled/deactivated (0x7) [ 5.834383] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 5.835298] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 [ 5.835400] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19 [ 5.835487] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20 [ 5.835576] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21 [ 5.836821] Adding 2103292k swap on /dev/sda1. Priority:-1 extents:1 across:2103292k SSFS [ 5.843664] usb 2-7: New USB device found, idVendor=05c8, idProduct=035d [ 5.843667] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.843669] usb 2-7: Product: HP HD Webcam [ 5.843670] usb 2-7: Manufacturer: SunplusIT INC. [ 5.889239] Linux video capture interface: v2.00 [ 5.897507] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 5.898034] Bluetooth: Core ver 2.20 [ 5.898061] NET: Registered protocol family 31 [ 5.898063] Bluetooth: HCI device and connection manager initialized [ 5.898067] Bluetooth: HCI socket layer initialized [ 5.898071] Bluetooth: L2CAP socket layer initialized [ 5.898077] Bluetooth: SCO socket layer initialized [ 5.908297] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless N 7265, REV=0x184 [ 5.908629] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [ 5.909224] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [ 5.911438] usbcore: registered new interface driver btusb [ 5.918811] uvcvideo: Found UVC 1.00 device HP HD Webcam (05c8:035d) [ 5.927026] Bluetooth: hci0: read Intel version: 370810011001140d00 [ 5.927385] input: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input22 [ 5.927490] usbcore: registered new interface driver uvcvideo [ 5.927492] USB Video Class driver (1.1.1) [ 5.928656] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.10-fw-1.10.1.14.d.bseq failed with error -2 [ 5.928662] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.1.14.d.bseq(-2) [ 5.929037] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.bseq [ 5.934029] Bluetooth: hci0: Intel Bluetooth firmware patch completed [ 5.935031] Bluetooth: hci0: Found Intel default device address (00:03:19:9e:8b:00) [ 5.944770] random: nonblocking pool is initialized [ 5.977000] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 5.982310] iwlwifi 0000:03:00.0 wlo1: renamed from wlan0 [ 7.012087] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.012091] Bluetooth: BNEP filters: protocol multicast [ 7.012096] Bluetooth: BNEP socket layer initialized [ 7.068947] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [ 7.069931] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [ 7.130556] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [ 7.131004] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [ 7.378792] NET: Registered protocol family 17 [ 7.684093] fuse init (API version 7.23) [ 10.355658] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 109.549486] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in ips_enabled (expected 1, found 0) [ 109.549495] ------------[ cut here ]------------ [ 109.549528] WARNING: CPU: 0 PID: 1015 at drivers/gpu/drm/i915/intel_display.c:12321 check_crtc_state+0x2c5/0x440 [i915]() [ 109.549531] pipe state doesn't match! [ 109.549533] Modules linked in: fuse af_packet bnep arc4 uvcvideo btusb btrtl iwlmvm videobuf2_vmalloc btbcm videobuf2_memops btintel videobuf2_core bluetooth v4l2_common videodev mac80211 tpm_infineon x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_hda_codec_idt snd_hda_codec_hdmi snd_hda_codec_generic kvm pn544_mei mei_phy pn544 snd_hda_intel hci snd_hda_codec nfc snd_hwdep iTCO_wdt iTCO_vendor_support snd_hda_core ppdev iwlwifi crct10dif_pclmul crc32_pclmul snd_pcm crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 glue_helper lrw gf128mul dm_mod ablk_helper cfg80211 cryptd snd_timer joydev parport_pc snd i2c_i801 parport rtsx_pci_ms memstick rfkill tpm_tis tpm wmi lpc_ich 8250_fintek mei_me shpchp mei soundcore hp_accel thermal processor battery lis3lv02d input_polldev intel_smartconnect [ 109.549619] hp_wireless ac rtsx_pci_sdmmc mmc_core serio_raw rtsx_pci mfd_core i915 i2c_algo_bit drm_kms_helper xhci_pci e1000e drm xhci_hcd ptp pps_core video button sg [ 109.549643] CPU: 0 PID: 1015 Comm: gnome-shell Tainted: G W 4.2.0-test+ #3 [ 109.549646] Hardware name: Hewlett-Packard HP EliteBook 940 G1/213E, BIOS L83 Ver. 00.62 09/06/2013 [ 109.549649] ffffffffa022c6e8 ffff8802340ab7e8 ffffffff8167b71b 0000000000000007 [ 109.549655] ffff8802340ab838 ffff8802340ab828 ffffffff81068146 ffff8802340ab858 [ 109.549660] ffff8802340ab8c0 ffff88003735e800 0000000000000001 ffff88003735eb50 [ 109.549665] Call Trace: [ 109.549673] [] dump_stack+0x4c/0x6e [ 109.549680] [] warn_slowpath_common+0x86/0xc0 [ 109.549684] [] warn_slowpath_fmt+0x46/0x50 [ 109.549744] [] ? intel_pipe_config_compare+0xb31/0xc60 [i915] [ 109.549768] [] check_crtc_state+0x2c5/0x440 [i915] [ 109.549801] [] intel_modeset_check_state+0x20e/0x6b0 [i915] [ 109.549833] [] intel_crtc_set_config+0x4c7/0x580 [i915] [ 109.549858] [] drm_mode_set_config_internal+0x66/0x100 [drm] [ 109.549880] [] drm_mode_setcrtc+0x3a8/0x4c0 [drm] [ 109.549894] [] drm_ioctl+0x125/0x610 [drm] [ 109.549912] [] ? drm_mode_setplane+0x1b0/0x1b0 [drm] [ 109.549919] [] do_vfs_ioctl+0x285/0x460 [ 109.549924] [] ? __fget+0x77/0xb0 [ 109.549929] [] SyS_ioctl+0x79/0x90 [ 109.549934] [] ? syscall_trace_leave+0x97/0x110 [ 109.549940] [] entry_SYSCALL_64_fastpath+0x16/0x75 [ 109.549944] ---[ end trace 7775cc7f83c84327 ]--- [ 110.312725] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in ips_enabled (expected 1, found 0) [ 110.312730] ------------[ cut here ]------------ [ 110.312749] WARNING: CPU: 3 PID: 1015 at drivers/gpu/drm/i915/intel_display.c:12321 check_crtc_state+0x2c5/0x440 [i915]() [ 110.312750] pipe state doesn't match! [ 110.312751] Modules linked in: fuse af_packet bnep arc4 uvcvideo btusb btrtl iwlmvm videobuf2_vmalloc btbcm videobuf2_memops btintel videobuf2_core bluetooth v4l2_common videodev mac80211 tpm_infineon x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_hda_codec_idt snd_hda_codec_hdmi snd_hda_codec_generic kvm pn544_mei mei_phy pn544 snd_hda_intel hci snd_hda_codec nfc snd_hwdep iTCO_wdt iTCO_vendor_support snd_hda_core ppdev iwlwifi crct10dif_pclmul crc32_pclmul snd_pcm crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 glue_helper lrw gf128mul dm_mod ablk_helper cfg80211 cryptd snd_timer joydev parport_pc snd i2c_i801 parport rtsx_pci_ms memstick rfkill tpm_tis tpm wmi lpc_ich 8250_fintek mei_me shpchp mei soundcore hp_accel thermal processor battery lis3lv02d input_polldev intel_smartconnect [ 110.312800] hp_wireless ac rtsx_pci_sdmmc mmc_core serio_raw rtsx_pci mfd_core i915 i2c_algo_bit drm_kms_helper xhci_pci e1000e drm xhci_hcd ptp pps_core video button sg [ 110.312814] CPU: 3 PID: 1015 Comm: gnome-shell Tainted: G W 4.2.0-test+ #3 [ 110.312816] Hardware name: Hewlett-Packard HP EliteBook 940 G1/213E, BIOS L83 Ver. 00.62 09/06/2013 [ 110.312818] ffffffffa022c6e8 ffff8802340ab7e8 ffffffff8167b71b 0000000000000007 [ 110.312821] ffff8802340ab838 ffff8802340ab828 ffffffff81068146 ffff8802340ab858 [ 110.312823] ffff8802340ab8c0 ffff88003735e800 0000000000000001 ffff88003735eb50 [ 110.312826] Call Trace: [ 110.312831] [] dump_stack+0x4c/0x6e [ 110.312835] [] warn_slowpath_common+0x86/0xc0 [ 110.312838] [] warn_slowpath_fmt+0x46/0x50 [ 110.312854] [] ? intel_pipe_config_compare+0xb31/0xc60 [i915] [ 110.312868] [] check_crtc_state+0x2c5/0x440 [i915] [ 110.312886] [] intel_modeset_check_state+0x20e/0x6b0 [i915] [ 110.312903] [] intel_crtc_set_config+0x4c7/0x580 [i915] [ 110.312920] [] drm_mode_set_config_internal+0x66/0x100 [drm] [ 110.312933] [] drm_mode_setcrtc+0x3a8/0x4c0 [drm] [ 110.312941] [] drm_ioctl+0x125/0x610 [drm] [ 110.312952] [] ? drm_mode_setplane+0x1b0/0x1b0 [drm] [ 110.312955] [] do_vfs_ioctl+0x285/0x460 [ 110.312958] [] ? __fget+0x77/0xb0 [ 110.312961] [] SyS_ioctl+0x79/0x90 [ 110.312964] [] ? syscall_trace_leave+0x97/0x110 [ 110.312967] [] entry_SYSCALL_64_fastpath+0x16/0x75 [ 110.312969] ---[ end trace 7775cc7f83c84328 ]--- [ 110.313033] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in ips_enabled (expected 1, found 0) [ 110.313035] ------------[ cut here ]------------ [ 110.313050] WARNING: CPU: 3 PID: 1015 at drivers/gpu/drm/i915/intel_display.c:12321 check_crtc_state+0x2c5/0x440 [i915]() [ 110.313051] pipe state doesn't match! [ 110.313052] Modules linked in: fuse af_packet bnep arc4 uvcvideo btusb btrtl iwlmvm videobuf2_vmalloc btbcm videobuf2_memops btintel videobuf2_core bluetooth v4l2_common videodev mac80211 tpm_infineon x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_hda_codec_idt snd_hda_codec_hdmi snd_hda_codec_generic kvm pn544_mei mei_phy pn544 snd_hda_intel hci snd_hda_codec nfc snd_hwdep iTCO_wdt iTCO_vendor_support snd_hda_core ppdev iwlwifi crct10dif_pclmul crc32_pclmul snd_pcm crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 glue_helper lrw gf128mul dm_mod ablk_helper cfg80211 cryptd snd_timer joydev parport_pc snd i2c_i801 parport rtsx_pci_ms memstick rfkill tpm_tis tpm wmi lpc_ich 8250_fintek mei_me shpchp mei soundcore hp_accel thermal processor battery lis3lv02d input_polldev intel_smartconnect [ 110.313085] hp_wireless ac rtsx_pci_sdmmc mmc_core serio_raw rtsx_pci mfd_core i915 i2c_algo_bit drm_kms_helper xhci_pci e1000e drm xhci_hcd ptp pps_core video button sg [ 110.313095] CPU: 3 PID: 1015 Comm: gnome-shell Tainted: G W 4.2.0-test+ #3 [ 110.313096] Hardware name: Hewlett-Packard HP EliteBook 940 G1/213E, BIOS L83 Ver. 00.62 09/06/2013 [ 110.313097] ffffffffa022c6e8 ffff8802340ab7e8 ffffffff8167b71b 0000000000000007 [ 110.313100] ffff8802340ab838 ffff8802340ab828 ffffffff81068146 ffff8802340ab858 [ 110.313102] ffff8802340ab8c0 ffff88003735e800 0000000000000001 ffff88003735eb50 [ 110.313104] Call Trace: [ 110.313107] [] dump_stack+0x4c/0x6e [ 110.313109] [] warn_slowpath_common+0x86/0xc0 [ 110.313112] [] warn_slowpath_fmt+0x46/0x50 [ 110.313126] [] ? intel_pipe_config_compare+0xb31/0xc60 [i915] [ 110.313139] [] check_crtc_state+0x2c5/0x440 [i915] [ 110.313157] [] intel_modeset_check_state+0x20e/0x6b0 [i915] [ 110.313172] [] intel_crtc_set_config+0x4c7/0x580 [i915] [ 110.313188] [] ? drm_modeset_lock_all_crtcs+0x90/0xa0 [drm] [ 110.313199] [] drm_mode_set_config_internal+0x66/0x100 [drm] [ 110.313211] [] drm_mode_setcrtc+0x3a8/0x4c0 [drm] [ 110.313219] [] drm_ioctl+0x125/0x610 [drm] [ 110.313229] [] ? drm_mode_setplane+0x1b0/0x1b0 [drm] [ 110.313232] [] do_vfs_ioctl+0x285/0x460 [ 110.313234] [] ? __fget+0x77/0xb0 [ 110.313237] [] SyS_ioctl+0x79/0x90 [ 110.313239] [] ? syscall_trace_leave+0x97/0x110 [ 110.313242] [] entry_SYSCALL_64_fastpath+0x16/0x75 [ 110.313244] ---[ end trace 7775cc7f83c84329 ]---