U-Boot 2015.10-rc2-00121-g5b4a87b (Aug 31 2015 - 07:32:38 +0000) CPU: Freescale i.MX6Q rev1.2 996 MHz (running at 792 MHz) CPU: Automotive temperature grade (-40C to 125C) at 28C Reset cause: POR Board: MX6-SabreSD I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 MMC: no card present MMC init failedPCI: pcie phy link never came up No panel detected: default to Hannstar-XGA Display: Hannstar-XGA (1024x768) In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 3  2  1  0 MMC: no card present MMC: no card present Booting from net ... BOOTP broadcast 1 DHCP client bound to address 192.168.111.121 (9 ms) Using FEC device TFTP from server 192.168.111.1; our IP address is 192.168.111.121 Filename 'for-upstream-br/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################## 4.4 MiB/s done Bytes transferred = 6329088 (609300 hex) BOOTP broadcast 1 DHCP client bound to address 192.168.111.121 (9 ms) Using FEC device TFTP from server 192.168.111.1; our IP address is 192.168.111.121 Filename 'for-upstream-br/imx6q-sabresd.dtb'. Load address: 0x18000000 Loading: *### 3.7 MiB/s done Bytes transferred = 35095 (8917 hex) BOOTP broadcast 1 DHCP client bound to address 192.168.111.121 (9 ms) Using FEC device TFTP from server 192.168.111.1; our IP address is 192.168.111.121 Filename 'for-upstream-br/rootfs.cpio.uboot'. Load address: 0x18c00000 Loading: *################################################################# ################################################################# ############################################################## 4 MiB/s done Bytes transferred = 2809956 (2ae064 hex) Kernel image @ 0x12000000 [ 0x000000 - 0x609300 ] ## Loading init Ramdisk from Legacy Image at 18c00000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 2809892 Bytes = 2.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800b916 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.2.0-00002-g23bd6cd (vstehle@laptop-vstehle) (gcc version 4.9.3 (Debian 4.9.3-3) ) #1 SMP Mon Aug 31 09:35:47 CEST 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Freescale i.MX6 Quad SABRE Smart Device Board [ 0.000000] cma: Reserved 16 MiB at 0x4f000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat 80b21c00, node_mem_map be7f0000 [ 0.000000] Normal zone: 2048 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 11 pages/cpu @be79a000 s14912 r8192 d21952 u45056 [ 0.000000] pcpu-alloc: s14912 r8192 d21952 u45056 alloc=11*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/nfs ip=dhcp nfsroot=192.168.111.1:,v3,tcp debug [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1000200K/1048576K available (7860K kernel code, 412K rwdata, 2708K rodata, 388K init, 8425K bss, 31992K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc0800000 - 0xff000000 (1000 MB) [ 0.000000] lowmem : 0x80000000 - 0xc0000000 (1024 MB) [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) [ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB) [ 0.000000] .text : 0x80008000 - 0x80a5a4e0 (10570 kB) [ 0.000000] .init : 0x80a5b000 - 0x80abc000 ( 388 kB) [ 0.000000] .data : 0x80abc000 - 0x80b232e0 ( 413 kB) [ 0.000000] .bss : 0x80b26000 - 0x813605ec (8426 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000035] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001412] Console: colour dummy device 80x30 [ 0.001456] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001465] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001473] ... MAX_LOCK_DEPTH: 48 [ 0.001481] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001488] ... CLASSHASH_SIZE: 4096 [ 0.001495] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001502] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001509] ... CHAINHASH_SIZE: 32768 [ 0.001516] memory used by lock dependency info: 5167 kB [ 0.001524] per task-struct memory footprint: 1536 bytes [ 0.001563] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.001583] pid_max: default: 32768 minimum: 301 [ 0.001921] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001940] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004559] CPU: Testing write buffer coherency: ok [ 0.005777] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005876] Setting up static identity map for 0x10008280 - 0x100082f0 [ 0.012391] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.014332] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.015845] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.016105] Brought up 4 CPUs [ 0.016132] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.016141] CPU: All CPU(s) started in SVC mode. [ 0.018919] devtmpfs: initialized [ 0.050400] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.051430] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.053267] pinctrl core: initialized pinctrl subsystem [ 0.057749] NET: Registered protocol family 16 [ 0.061787] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.064260] CPU identified as i.MX6Q, silicon rev 1.2 [ 0.112614] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.112629] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.115834] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.178027] mxs-dma 110000.dma-apbh: initialized [ 0.184614] vgaarb: loaded [ 0.185689] SCSI subsystem initialized [ 0.186203] libata version 3.00 loaded. [ 0.186932] usbcore: registered new interface driver usbfs [ 0.187100] usbcore: registered new interface driver hub [ 0.187338] usbcore: registered new device driver usb [ 0.190056] i2c i2c-0: IMX I2C adapter registered [ 0.190086] i2c i2c-0: can't use DMA [ 0.191226] i2c i2c-1: IMX I2C adapter registered [ 0.191252] i2c i2c-1: can't use DMA [ 0.192391] i2c i2c-2: IMX I2C adapter registered [ 0.192414] i2c i2c-2: can't use DMA [ 0.192597] Linux video capture interface: v2.00 [ 0.192938] pps_core: LinuxPPS API ver. 1 registered [ 0.192950] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.193011] PTP clock support registered [ 0.193885] Advanced Linux Sound Architecture Driver Initialized. [ 0.197785] Bluetooth: Core ver 2.20 [ 0.197884] NET: Registered protocol family 31 [ 0.197896] Bluetooth: HCI device and connection manager initialized [ 0.197990] Bluetooth: HCI socket layer initialized [ 0.198021] Bluetooth: L2CAP socket layer initialized [ 0.198187] Bluetooth: SCO socket layer initialized [ 0.205585] DMA-API: preallocated 4096 debug entries [ 0.205599] DMA-API: debugging enabled by kernel config [ 0.206178] clocksource: Switched to clocksource mxc_timer1 [ 0.238618] NET: Registered protocol family 2 [ 0.240692] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.240846] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.242961] TCP: Hash tables configured (established 8192 bind 8192) [ 0.243194] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.243505] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.244500] NET: Registered protocol family 1 [ 0.245856] RPC: Registered named UNIX socket transport module. [ 0.245872] RPC: Registered udp transport module. [ 0.245883] RPC: Registered tcp transport module. [ 0.245893] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.245932] PCI: CLS 0 bytes, default 64 [ 0.246924] Trying to unpack rootfs image as initramfs... [ 0.416993] Freeing initrd memory: 2748K (88c00000 - 88eaf000) [ 0.418154] hw perfevents: Failed to parse /soc/pmu/interrupt-affinity[0] [ 0.418259] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.421949] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.442270] VFS: Disk quotas dquot_6.6.0 [ 0.442738] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.450832] NFS: Registering the id_resolver key type [ 0.451225] Key type id_resolver registered [ 0.451242] Key type id_legacy registered [ 0.451443] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.453548] fuse init (API version 7.23) [ 0.462717] io scheduler noop registered [ 0.462747] io scheduler deadline registered [ 0.462848] io scheduler cfq registered (default) [ 0.463580] imx-weim 21b8000.weim: Driver registered. [ 0.785818] imx6q-pcie 1ffc000.pcie: phy link never came up [ 0.786662] imx6q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00 [ 0.786685] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] [ 0.786703] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff] [ 0.786722] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.786879] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400 [ 0.786946] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 0.786983] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] [ 0.787282] pci 0000:00:00.0: supports D1 [ 0.787299] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.788388] PCI: bus0: Fast back to back transfers disabled [ 0.788764] PCI: bus1: Fast back to back transfers enabled [ 0.788786] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.788947] pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff] [ 0.788974] pci 0000:00:00.0: BAR 6: assigned [mem 0x01100000-0x0110ffff pref] [ 0.788992] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.789830] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 0.789859] pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded [ 0.792039] backlight supply power not found, using dummy regulator [ 0.797159] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.797183] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 0.805338] imx-sdma 20ec000.sdma: initialized [ 0.808128] pfuze100-regulator 1-0008: Full layer: 1, Metal layer: 1 [ 0.808841] pfuze100-regulator 1-0008: FAB: 0, FIN: 0 [ 0.808857] pfuze100-regulator 1-0008: pfuze100 found. [ 0.832833] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 24, base_baud = 5000000) is a IMX [ 1.776184] console [ttymxc0] enabled [ 1.783707] [drm] Initialized drm 1.1.0 20060810 [ 1.794923] imx-ipuv3 2400000.ipu: IPUv3H probed [ 1.806258] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.812893] [drm] No driver support for vblank timestamp query. [ 1.819836] imx-drm display-subsystem: bound imx-ipuv3-crtc.0 (ops ipu_crtc_ops) [ 1.827484] imx-drm display-subsystem: bound imx-ipuv3-crtc.1 (ops ipu_crtc_ops) [ 1.835104] imx-drm display-subsystem: bound imx-ipuv3-crtc.4 (ops ipu_crtc_ops) [ 1.842815] imx-drm display-subsystem: bound imx-ipuv3-crtc.5 (ops ipu_crtc_ops) [ 1.850914] dwhdmi-imx 120000.hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1 [ 1.859384] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 1.867413] imx-drm display-subsystem: bound 2000000.aips-bus:ldb@020e0008 (ops imx_ldb_ops) [ 1.896960] Console: switching to colour frame buffer device 128x48 [ 1.908901] imx-drm display-subsystem: fb0: frame buffer device [ 1.914924] imx-drm display-subsystem: registered panic notifier [ 1.946265] [drm] Initialized imx-drm 1.0.0 20120507 on minor 0 [ 1.952911] imx-ipuv3 2800000.ipu: IPUv3H probed [ 1.982115] brd: module loaded [ 2.001923] loop: module loaded [ 2.006912] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.014850] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.022901] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.031118] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.042166] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 2.049207] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.058033] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.070986] scsi host0: ahci-imx [ 2.075700] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 295 [ 2.092554] m25p80 spi0.0: m25p32 (4096 Kbytes) [ 2.102824] spi_imx 2008000.ecspi: probed [ 2.107705] CAN device driver interface [ 2.113811] 2188000.ethernet supply phy not found, using dummy regulator [ 2.137999] pps pps0: new PPS source ptp0 [ 2.163187] libphy: fec_enet_mii_bus: probed [ 2.169443] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.177135] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.183687] ehci-pci: EHCI PCI platform driver [ 2.188316] ehci-mxc: Freescale On-Chip EHCI Host driver [ 2.194047] usbcore: registered new interface driver usb-storage [ 2.203082] usb_otg_vbus: supplied by SWBST [ 2.208383] ci_hdrc ci_hdrc.0: ChipIdea HDRC found, revision: 20, lpm: 0; cap: c09cc100 op: c09cc140 [ 2.220706] ci_hdrc ci_hdrc.0: It is OTG capable controller [ 2.230962] ci_hdrc ci_hdrc.0: at ci_runtime_suspend [ 2.236765] i