4.3.1 (Gentoo 4.3.1-r1 p1.1) ) #6 PREEMPT Wed Sep 24 00:39:22 CEST 2008 Command line: root=/dev/md/d0p2 splash=silent,theme:livecd-2007.0 quiet CONSOLE=/dev/tty1 nmi_watchdog=2 mce=bootlog iommu=allowed,soft,panic,noagp,memaper KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) last_pfn = 0x7fff0 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping 0000000000 - 007fe00000 page 2M 007fe00000 - 007fff0000 page 4k kernel direct mapping tables up to 7fff0000 @ 8000-c000 last_map_addr: 7fff0000 end: 7fff0000 DMI 2.3 present. ACPI: RSDP 000F7880, 0014 (r0 Nvidia) ACPI: RSDT 7FFF3040, 0038 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: FACP 7FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: DSDT 7FFF3180, 6360 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) ACPI: FACS 7FFF0000, 0040 ACPI: SSDT 7FFF9600, 00D6 (r1 PTLTD POWERNOW 1 LTP 1) ACPI: SRAT 7FFF9740, 0090 (r1 AMD HAMMER 1 AMD 1) ACPI: MCFG 7FFF9840, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: APIC 7FFF9540, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) (5 early reservations) ==> bootmem [0000000000 - 007fff0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000099e6c8] TEXT DATA BSS ==> [0000200000 - 000099e6c8] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] found SMP MP-table at [ffff8800000f5500] 000f5500 [ffffe20000000000-ffffe20001ffffff] PMD -> [ffff880001200000-ffff8800031fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007fff0 On node 0 totalpages: 524175 DMA zone: 1882 pages, LIFO batch:0 DMA32 zone: 512048 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513930 Kernel command line: root=/dev/md/d0p2 splash=silent,theme:livecd-2007.0 quiet CONSOLE=/dev/tty1 nmi_watchdog=2 mce=bootlog iommu=allowed,soft,panic,noagp,memaper Initializing CPU#0 Preemptible RCU implementation. PID hash table entries: 4096 (order: 12, 32768 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 2014.963 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... Node 0: aperture @ 0 size 32 MB PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x3500000 - 0x7500000 Memory: 1986268k/2097088k available (1981k kernel code, 109792k reserved, 1194k data, 4276k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 4029.92 BogoMIPS (lpj=2014963) Security Framework initialized Smack: Initializing. Mount-cache hash table entries: 256 Initializing cgroup subsys debug Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) tseg: 0000000000 CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 02 ACPI: Core revision 20080609 ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 Using local APIC timer interrupts. APIC timer calibration result 12593529 Detected 12.593 MHz APIC timer. Testing NMI watchdog ... OK. net_namespace: 1160 bytes NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 0000000080000000 aka 2048M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [feb00000, fec0ffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [80000000, fed3ffff] bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [80000000, fcffffffff] bus: 00 index 2 mmio: [feb00000, fec0ffff] bus: 00 index 3 mmio: [a0000, bffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) HPET not enabled in BIOS. You might try hpet=force boot option PCI: 0000:00:01.1 reg 10 io port: [e400, e41f] PCI: 0000:00:01.1 reg 20 io port: [4c00, 4c3f] PCI: 0000:00:01.1 reg 24 io port: [4c40, 4c7f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled PCI: 0000:00:02.0 reg 10 32bit mmio: [d4004000, d4004fff] pci 0000:00:02.0: supports D1 pci 0000:00:02.0: supports D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled PCI: 0000:00:02.1 reg 10 32bit mmio: [feb00000, feb000ff] pci 0000:00:02.1: supports D1 pci 0000:00:02.1: supports D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled PCI: 0000:00:04.0 reg 10 io port: [dc00, dcff] PCI: 0000:00:04.0 reg 14 io port: [e000, e0ff] PCI: 0000:00:04.0 reg 18 32bit mmio: [d4003000, d4003fff] pci 0000:00:04.0: supports D1 pci 0000:00:04.0: supports D2 PCI: 0000:00:06.0 reg 20 io port: [f000, f00f] PCI: 0000:00:07.0 reg 10 io port: [9f0, 9f7] PCI: 0000:00:07.0 reg 14 io port: [bf0, bf3] PCI: 0000:00:07.0 reg 18 io port: [970, 977] PCI: 0000:00:07.0 reg 1c io port: [b70, b73] PCI: 0000:00:07.0 reg 20 io port: [d800, d80f] PCI: 0000:00:07.0 reg 24 32bit mmio: [d4002000, d4002fff] PCI: 0000:00:08.0 reg 10 io port: [9e0, 9e7] PCI: 0000:00:08.0 reg 14 io port: [be0, be3] PCI: 0000:00:08.0 reg 18 io port: [960, 967] PCI: 0000:00:08.0 reg 1c io port: [b60, b63] PCI: 0000:00:08.0 reg 20 io port: [c400, c40f] PCI: 0000:00:08.0 reg 24 32bit mmio: [d4001000, d4001fff] PCI: 0000:00:0a.0 reg 10 32bit mmio: [d4000000, d4000fff] PCI: 0000:00:0a.0 reg 14 io port: [b000, b007] pci 0000:00:0a.0: supports D1 pci 0000:00:0a.0: supports D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: PME# disabled pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0e.0: PME# disabled PCI: 0000:05:07.0 reg 10 io port: [a000, a0ff] PCI: 0000:05:07.0 reg 14 32bit mmio: [d3004000, d30040ff] PCI: 0000:05:07.0 reg 18 32bit mmio: [d3006000, d3006fff] PCI: 0000:05:07.0 reg 30 32bit mmio: [d2000000, d200ffff] PCI: 0000:05:0b.0 reg 10 32bit mmio: [d3005000, d30057ff] PCI: 0000:05:0b.0 reg 14 32bit mmio: [d3000000, d3003fff] pci 0000:05:0b.0: supports D1 pci 0000:05:0b.0: supports D2 pci 0000:05:0b.0: PME# supported from D0 D1 D2 D3hot pci 0000:05:0b.0: PME# disabled pci 0000:00:09.0: transparent bridge PCI: bridge 0000:00:09.0 io port: [a000, afff] PCI: bridge 0000:00:09.0 32bit mmio: [d2000000, d3ffffff] PCI: 0000:01:00.0 reg 10 32bit mmio: [c0000000, cfffffff] PCI: 0000:01:00.0 reg 18 64bit mmio: [d1000000, d100ffff] PCI: 0000:01:00.0 reg 20 io port: [9000, 90ff] PCI: 0000:01:00.0 reg 30 32bit mmio: [d0000000, d001ffff] pci 0000:01:00.0: supports D1 pci 0000:01:00.0: supports D2 PCI: 0000:01:00.1 reg 10 64bit mmio: [d1010000, d101ffff] pci 0000:01:00.1: supports D1 pci 0000:01:00.1: supports D2 Pre-1.1 PCIe device detected, disable ASPM for 0000:00:0e.0. It can be enabled forcedly with 'pcie_aspm=force' PCI: bridge 0000:00:0e.0 io port: [9000, 9fff] PCI: bridge 0000:00:0e.0 32bit mmio: [d0000000, d1ffffff] PCI: bridge 0000:00:0e.0 64bit mmio pref: [c0000000, cfffffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 11 *12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default ACPI: RTC can wake from S4 system 00:01: ioport range 0x4000-0x407f has been reserved system 00:01: ioport range 0x4080-0x40ff has been reserved system 00:01: ioport range 0x4400-0x447f has been reserved system 00:01: ioport range 0x4480-0x44ff has been reserved system 00:01: ioport range 0x4800-0x487f has been reserved system 00:01: ioport range 0x4880-0x48ff has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x800-0x87f has been reserved system 00:02: ioport range 0x290-0x297 has been reserved system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved system 00:0e: iomem range 0xd4200-0xd7fff has been reserved system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved system 00:0e: iomem range 0xfc000-0xfffff could not be reserved system 00:0e: iomem range 0x7fff0000-0x7fffffff could not be reserved system 00:0e: iomem range 0xffff0000-0xffffffff could not be reserved system 00:0e: iomem range 0x0-0x9ffff could not be reserved system 00:0e: iomem range 0x100000-0x7ffeffff could not be reserved system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0e: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:0e: iomem range 0xfefff000-0xfeffffff could not be reserved system 00:0e: iomem range 0xfff80000-0xfff80fff could not be reserved system 00:0e: iomem range 0xfff90000-0xfffbffff could not be reserved system 00:0e: iomem range 0xfffed000-0xfffeffff could not be reserved pci 0000:00:09.0: PCI bridge, secondary bus 0000:05 pci 0000:00:09.0: IO window: 0xa000-0xafff pci 0000:00:09.0: MEM window: 0xd2000000-0xd3ffffff pci 0000:00:09.0: PREFETCH window: 0x00000088000000-0x000000880fffff pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04 pci 0000:00:0b.0: IO window: disabled pci 0000:00:0b.0: MEM window: disabled pci 0000:00:0b.0: PREFETCH window: disabled pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 pci 0000:00:0c.0: IO window: disabled pci 0000:00:0c.0: MEM window: disabled pci 0000:00:0c.0: PREFETCH window: disabled pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0d.0: IO window: disabled pci 0000:00:0d.0: MEM window: disabled pci 0000:00:0d.0: PREFETCH window: disabled pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01 pci 0000:00:0e.0: IO window: 0x9000-0x9fff pci 0000:00:0e.0: MEM window: 0xd0000000-0xd1ffffff pci 0000:00:0e.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 pci 0000:00:0d.0: setting latency timer to 64 pci 0000:00:0e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 05 index 0 io port: [a000, afff] bus: 05 index 1 mmio: [d2000000, d3ffffff] bus: 05 index 2 mmio: [88000000, 880fffff] bus: 05 index 3 io port: [0, ffff] bus: 05 index 4 mmio: [0, ffffffffffffffff] bus: 04 index 0 mmio: [0, 0] bus: 04 index 1 mmio: [0, 0] bus: 04 index 2 mmio: [0, 0] bus: 04 index 3 mmio: [0, 0] bus: 03 index 0 mmio: [0, 0] bus: 03 index 1 mmio: [0, 0] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 02 index 0 mmio: [0, 0] bus: 02 index 1 mmio: [0, 0] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 mmio: [0, 0] bus: 01 index 0 io port: [9000, 9fff] bus: 01 index 1 mmio: [d0000000, d1ffffff] bus: 01 index 2 mmio: [c0000000, cfffffff] bus: 01 index 3 mmio: [0, 0] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 3880 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered (default) pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Found enabled HT MSI Mapping pci 0000:00:0b.0: Linking AER extended capability pci 0000:00:0c.0: Enabling HT MSI Mapping pci 0000:00:0c.0: Found enabled HT MSI Mapping pci 0000:00:0c.0: Linking AER extended capability pci 0000:00:0d.0: Enabling HT MSI Mapping pci 0000:00:0d.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Linking AER extended capability pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:0e.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Linking AER extended capability pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:0b.0: setting latency timer to 64 pcieport-driver 0000:00:0b.0: found MSI capability pci_express 0000:00:0b.0:pcie00: allocate port service pci_express 0000:00:0b.0:pcie03: allocate port service pcieport-driver 0000:00:0c.0: setting latency timer to 64 pcieport-driver 0000:00:0c.0: found MSI capability pci_express 0000:00:0c.0:pcie00: allocate port service pci_express 0000:00:0c.0:pcie03: allocate port service pcieport-driver 0000:00:0d.0: setting latency timer to 64 pcieport-driver 0000:00:0d.0: found MSI capability pci_express 0000:00:0d.0:pcie00: allocate port service pci_express 0000:00:0d.0:pcie03: allocate port service pcieport-driver 0000:00:0e.0: setting latency timer to 64 pcieport-driver 0000:00:0e.0: found MSI capability pci_express 0000:00:0e.0:pcie00: allocate port service pci_express 0000:00:0e.0:pcie03: allocate port service Linux agpgart interface v0.103 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP bic registered registered taskstats version 1 Freeing unused kernel memory: 4276k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 i2c /dev entries driver i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 Switched to high resolution mode on CPU 0 uvesafb: <1>BUG: unable to handle kernel paging request at ffff88017f9cf323 IP: [] strnlen+0x14/0x1e PGD 202063 PUD 0 Oops: 0000 [1] PREEMPT CPU 0 Modules linked in: uvesafb(+) cn fbcon crc32 font bitblit fbcon_rotate fbcon_ccw fbcon_cw fbcon_ud softcursor fb backlight cfbfillrect cfbimgblt cfbcopyarea i2c_nforce2 i2c_algo_bit i2c_dev i2c_core Pid: 490, comm: insmod Not tainted 2.6.27-rc7-uvesa #6 RIP: 0010:[] [] strnlen+0x14/0x1e RSP: 0018:ffff88007e5f3848 EFLAGS: 00010082 RAX: ffff88017f9cf323 RBX: 0000000000000000 RCX: 00000000ffffffff RDX: ffff88017f9cf323 RSI: fffffffffffffffe RDI: ffff88017f9cf323 RBP: ffff88007e5f3848 R08: 00000000ffffffff R09: 0000000000000000 R10: 0000000244972b73 R11: ffff88007f9542d8 R12: ffffffff81782a60 R13: ffff88017f9cf323 R14: 00000000ffffffff R15: ffffffff81782e60 FS: 0000000000000000(0000) GS:ffffffff8131c240(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff88017f9cf323 CR3: 000000007e593000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process insmod (pid: 490, threadinfo ffff88007e5f2000, task ffff88007f954290) Stack: ffff88007e5f3888 ffffffff81104bca ffff88007e5f3878 ffff88007e5f3ac8 ffffffff81782a60 ffffffffa005084b 0000000000000000 00000000ffffffff ffff88007e5f39e8 ffffffff81104f30 ffffffff812f2bc0 ffffffff817723e0 Call Trace: [] string+0x3d/0xa1 [] vsnprintf+0x302/0x5a4 [] ? enqueue_hrtimer+0xe3/0xf1 [] ? hrtick_start_fair+0xc6/0xce [] ? pick_next_task_fair+0x9a/0xa9 [] vscnprintf+0x11/0x21 [] vprintk+0x110/0x2a6 [] ? schedule_timeout+0xa6/0xc2 [] ? process_timeout+0x0/0xb [] printk+0x67/0x69 [] ? uvesafb_exec+0x283/0x294 [uvesafb] [] ? update_curr+0x5c/0xa7 [] uvesafb_probe+0x118/0xe71 [uvesafb] [] ? ida_get_new_above+0x115/0x1c8 [] ? sysfs_ilookup_test+0x0/0x14 [] ? sysfs_addrm_finish+0x20/0x276 [] ? __sysfs_add_one+0x1f/0xae [] ? sysfs_do_create_link+0xf7/0x144 [] platform_drv_probe+0x12/0x14 [] driver_probe_device+0xbf/0x16c [] ? __device_attach+0x0/0xb [] __device_attach+0x9/0xb [] bus_for_each_drv+0x51/0x88 [] device_attach+0x64/0x79 [] bus_attach_device+0x28/0x59 [] device_add+0x3a9/0x55d [] ? kobject_init+0x43/0x83 [] platform_device_add+0x10e/0x14a [] ? uvesafb_init+0x0/0xbe [uvesafb] [] uvesafb_init+0x66/0xbe [uvesafb] [] _stext+0x47/0x13f [] sys_init_module+0xa9/0x1b9 [] system_call_fastpath+0x16/0x1b Code: c3 55 48 89 f8 48 89 e5 eb 03 48 ff c0 80 38 00 75 f8 48 29 f8 c9 c3 55 48 89 f8 48 89 e5 eb 03 48 ff c0 48 85 f6 74 08 48 ff ce <80> 38 00 75 f0 48 29 f8 c9 c3 55 31 c0 48 89 e5 eb 13 41 38 c8 RIP [] strnlen+0x14/0x1e RSP CR2: ffff88017f9cf323 ---[ end trace 4d89ac4337a6dfc9 ]--- note: insmod[490] exited with preempt_count 2 BUG: scheduling while atomic: insmod/490/0x10000003 Modules linked in: uvesafb(+) cn fbcon crc32 font bitblit fbcon_rotate fbcon_ccw fbcon_cw fbcon_ud softcursor fb backlight cfbfillrect cfbimgblt cfbcopyarea i2c_nforce2 i2c_algo_bit i2c_dev i2c_core Pid: 490, comm: insmod Tainted: G D 2.6.27-rc7-uvesa #6 Call Trace: [] __schedule_bug+0x55/0x5a [] schedule+0x8c/0x3e6 [] __cond_resched+0x1c/0x43 [] _cond_resched+0x2d/0x38 [] unmap_vmas+0x61d/0x79e [] exit_mmap+0x69/0x101 [] mmput+0x27/0xbd [] exit_mm+0x10d/0x11a [] ? acct_collect+0x19a/0x1a3 [] do_exit+0x202/0x877 [] ? show_registers+0x244/0x253 [] ? do_unblank_screen+0xf/0x10b [] oops_begin+0x0/0x45 [] do_page_fault+0x7f4/0x8d0 [] error_exit+0x0/0x51 [] ? strnlen+0x14/0x1e [] string+0x3d/0xa1 [] vsnprintf+0x302/0x5a4 [] ? enqueue_hrtimer+0xe3/0xf1 [] ? hrtick_start_fair+0xc6/0xce [] ? pick_next_task_fair+0x9a/0xa9 [] vscnprintf+0x11/0x21 [] vprintk+0x110/0x2a6 [] ? schedule_timeout+0xa6/0xc2 [] ? process_timeout+0x0/0xb [] printk+0x67/0x69 [] ? uvesafb_exec+0x283/0x294 [uvesafb] [] ? update_curr+0x5c/0xa7 [] uvesafb_probe+0x118/0xe71 [uvesafb] [] ? ida_get_new_above+0x115/0x1c8 [] ? sysfs_ilookup_test+0x0/0x14 [] ? sysfs_addrm_finish+0x20/0x276 [] ? __sysfs_add_one+0x1f/0xae [] ? sysfs_do_create_link+0xf7/0x144 [] platform_drv_probe+0x12/0x14 [] driver_probe_device+0xbf/0x16c [] ? __device_attach+0x0/0xb [] __device_attach+0x9/0xb [] bus_for_each_drv+0x51/0x88 [] device_attach+0x64/0x79 [] bus_attach_device+0x28/0x59 [] device_add+0x3a9/0x55d [] ? kobject_init+0x43/0x83 [] platform_device_add+0x10e/0x14a [] ? uvesafb_init+0x0/0xbe [uvesafb] [] uvesafb_init+0x66/0xbe [uvesafb] [] _stext+0x47/0x13f [] sys_init_module+0xa9/0x1b9 [] system_call_fastpath+0x16/0x1b usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver BIOS EDD facility v0.16 2004-Jun-25, 2 devices found SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods No dock devices found. libata version 3.00 loaded. pata_amd 0000:00:06.0: version 0.3.10 pata_amd 0000:00:06.0: setting latency timer to 64 scsi0 : pata_amd scsi1 : pata_amd ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 ata1.01: NODEV after polling detection ata1.00: ATAPI: BENQ DVD DD DW1640, BSGB, max UDMA/33 ata1: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13) ata1.00: configured for UDMA/33 scsi 0:0:0:0: CD-ROM BENQ DVD DD DW1640 BSGB PQ: 0 ANSI: 5 sata_nv 0000:00:07.0: version 3.5 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 sata_nv 0000:00:07.0: setting latency timer to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23 ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7 ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 2:0:0:0: [sda] Attached SCSI disk ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 sata_nv 0000:00:08.0: setting latency timer to 64 scsi4 : sata_nv scsi5 : sata_nv ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 22 ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 22 ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7 ata5.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32) ata5.00: configured for UDMA/133 scsi 4:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 sd 4:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 sd 4:0:0:0: [sdb] Attached SCSI disk ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27-rc7-uvesa ehci_hcd usb usb1: SerialNumber: 0000:00:02.1 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 20, io mem 0xd4004000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected usb 1-7: new high speed USB device using ehci_hcd and address 4 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27-rc7-uvesa ohci_hcd usb usb2: SerialNumber: 0000:00:02.0 usb 1-7: configuration #1 chosen from 1 choice usb 1-7: New USB device found, idVendor=058f, idProduct=6362 usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-7: Product: Mass Storage Device usb 1-7: Manufacturer: Generic usb 1-7: SerialNumber: 058F312D81B usbcore: registered new interface driver libusual Initializing USB Mass Storage driver... libusual: modprobe for usb-storage succeeded, but module is not present usb 2-2: new low speed USB device using ohci_hcd and address 2 usb 2-2: configuration #1 chosen from 1 choice input: Razer Razer Diamondback Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input1 input,hidraw0: USB HID v1.10 Mouse [Razer Razer Diamondback Optical Mouse] on usb-0000:00:02.0-2 usb 2-2: New USB device found, idVendor=1532, idProduct=0002 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: Razer Diamondback Optical Mouse usb 2-2: Manufacturer: Razer usb 2-4: new full speed USB device using ohci_hcd and address 3 usb 2-4: configuration #1 chosen from 1 choice usb 2-4: New USB device found, idVendor=05a9, idProduct=4519 usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-4: Product: USB Camera usb 2-4: Manufacturer: OmniVision Technologies, Inc. usb 2-9: new full speed USB device using ohci_hcd and address 4 usb 2-9: configuration #1 chosen from 1 choice usb 2-9: New USB device found, idVendor=04b8, idProduct=010b usb 2-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-9: Product: Perfection1240 usb 2-9: Manufacturer: EPSON usb 2-10: new low speed USB device using ohci_hcd and address 5 usb 2-10: configuration #1 chosen from 1 choice usb 2-10: New USB device found, idVendor=0463, idProduct=ffff usb 2-10: New USB device strings: Mfr=1, Product=2, SerialNumber=4 usb 2-10: Product: ELLIPSE usb 2-10: Manufacturer: MGE UPS SYSTEMS usb 2-10: SerialNumber: APCG190MJ scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23 forcedeth 0000:00:0a.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 9, addr 04:4b:80:80:80:03 forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3 NET: Registered protocol family 1 ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22 Intel ICH 0000:00:04.0: setting latency timer to 64 intel8x0_measure_ac97_clock: measured 50864 usecs intel8x0: clocking to 46801 processor ACPI0007:00: registered as cooling_device0 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (40 C) input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 ACPI: Power Button (CM) [PWRB] fan PNP0C0B:00: registered as cooling_device1 ACPI: Fan [FAN] (on) powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 ata1: soft resetting link ata1.01: NODEV after polling detection ata1: nv_mode_filter: 0x701f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13) ata1.00: configured for UDMA/33 md: raid1 personality registered for level 1 md: md_d0 stopped. md: bind md: bind raid1: raid set md_d0 active with 2 out of 2 mirrors md_d0: bitmap initialized from disk: read 1/1 pages, set 64 bits created bitmap (8 pages) for device md_d0 md_d0: p1 p2 p3 p4 EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds usb-storage: device scan complete scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 sd 6:0:0:0: [sdc] Attached SCSI removable disk sd 6:0:0:1: [sdd] Attached SCSI removable disk sd 6:0:0:2: [sde] Attached SCSI removable disk sd 6:0:0:3: [sdf] Attached SCSI removable disk IT8712 SuperIO detected. Serial: 8250/16550 driver1 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Linux video capture interface: v2.00 gspca: main v2.2.0 registered gspca: probing 05a9:4519 scsi 0:0:0:0: Attached scsi generic sg0 type 5 sd 2:0:0:0: Attached scsi generic sg1 type 0 sd 4:0:0:0: Attached scsi generic sg2 type 0 sd 6:0:0:0: Attached scsi generic sg3 type 0 sd 6:0:0:1: Attached scsi generic sg4 type 0 sd 6:0:0:2: Attached scsi generic sg5 type 0 sd 6:0:0:3: Attached scsi generic sg6 type 0 Driver 'sr' needs updating - please use bus_type methods ov519: I2C synced in 1 attempt(s) ov519: starting OV7xx0 configuration sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 ov519: Sensor is an OV7648 gspca: probe ok usbcore: registered new interface driver ov519 ov519: registered usbcore: registered new interface driver snd-usb-audio ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 sym53c8xx 0000:05:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 sym0: <875> rev 0x3 at pci 0000:05:07.0 irq 17 sym0: Tekram NVRAM, ID 7, Fast-20, SE, parity checking sym0: SCSI BUS has been reset. scsi7 : sym-2.2.3 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 firewire_ohci 0000:05:0b.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 firewire_ohci: Added fw-ohci device 0000:05:0b.0, OHCI version 1.10 input: PC Speaker as /devices/platform/pcspkr/input/input4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 firewire_core: created device fw0: GUID 0011d800004e0503, S400 EXT3 FS on md_d0p2, internal journal oprofile: using NMI interrupt. EDAC MC: Ver: 2.1.0 Sep 23 2008 Non-volatile memory driver v1.2 it8712f_wdt: Found IT8712F chip revision 7 - using DogFood address 0x201 it8712f_wdt: disabling watchdog timer loop: module loaded device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with journal data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with journal data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with journal data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with journal data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-5, internal journal EXT3-fs: mounted filesystem with journal data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-7, internal journal EXT3-fs: mounted filesystem with journal data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-12, internal journal EXT3-fs: mounted filesystem with journal data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-6, internal journal EXT3-fs: mounted filesystem with journal data mode. kjournald2 starting. Commit interval 5 seconds EXT4 FS on dm-9, internal journal EXT4-fs: mounted filesystem with ordered data mode. EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled kjournald2 starting. Commit interval 5 seconds EXT4 FS on dm-10, internal journal EXT4-fs: mounted filesystem with ordered data mode. EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled kjournald starting. Commit interval 5 seconds EXT3 FS on dm-11, internal journal EXT3-fs: mounted filesystem with journal data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-13, internal journal EXT3-fs: mounted filesystem with journal data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-14, internal journal EXT3-fs: mounted filesystem with journal data mode. kjournald2 starting. Commit interval 5 seconds EXT4 FS on dm-18, internal journal EXT4-fs: mounted filesystem with ordered data mode. EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled kjournald starting. Commit interval 5 seconds EXT3 FS on dm-16, internal journal EXT3-fs: mounted filesystem with journal data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-15, internal journal EXT3-fs: mounted filesystem with journal data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-17, internal journal EXT3-fs: mounted filesystem with journal data mode. Adding 1572860k swap on /dev/md/d0p3. Priority:-1 extents:1 across:1572860k it87: Found IT8712F chip at 0x290, revision 7 it87: in3 is VCC (+5V) it87: in7 is VCCH (+5V Stand-By) NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period fuse init (API version 7.9) warning: `squid' uses 32-bit capabilities (legacy support in use) usb 2-10: usbfs: process 11064 (hald-addon-usbh) did not claim interface 0 before use usb 2-10: usbfs: process 11064 (hald-addon-usbh) did not claim interface 0 before use usb 1-7: reset high speed USB device using ehci_hcd and address 4 usb 1-7: usbfs: USBDEVFS_CONTROL failed cmd hald-addon-usbh rqt 128 rq 6 len 255 ret -108 usb 1-7: usbfs: USBDEVFS_CONTROL failed cmd hald-addon-usbh rqt 128 rq 6 len 255 ret -71 usb 1-7: reset high speed USB device using ehci_hcd and address 4 usb 1-7: usbfs: USBDEVFS_CONTROL failed cmd hald-addon-usbh rqt 128 rq 6 len 255 ret -108 usb 2-10: usbfs: process 12005 (usbhid-ups) did not claim interface 0 before use usb 2-10: usbfs: process 12005 (usbhid-ups) did not claim interface 0 before use usb 2-10: usbfs: process 11064 (hald-addon-usbh) did not claim interface 0 before use usb 2-10: usbfs: process 11064 (hald-addon-usbh) did not claim interface 0 before use ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 pci 0000:01:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [drm] Initialized drm 1.1.0 20060810 pci 0000:01:00.0: setting latency timer to 64 [drm] Initialized radeon 1.29.0 20080528 on minor 0 usb 1-7: reset high speed USB device using ehci_hcd and address 4 io scheduler anticipatory registered Hangcheck: starting hangcheck timer 0.9.0 (tick is 30 seconds, margin is 180 seconds). Hangcheck: Using get_cycles(). Marking TSC unstable due to cpufreq changes Clocksource tsc unstable (delta = -249995529 ns) usb 2-10: usbfs: process 12005 (usbhid-ups) did not claim interface 0 before use usb 2-10: usbfs: process 12005 (usbhid-ups) did not claim interface 0 before use [drm] Setting GART location based on new memory map [drm] Loading R400 Microcode [drm] Num pipes: 4 [drm] writeback test succeeded in 1 usecs usbcore: registered new interface driver wacom wacom: v1.48:USB Wacom Graphire and Wacom Intuos tablet driver