Linux version 2.6.27-rc4 (root@gumis) (gcc version 4.3.1 (Debian 4.3.1-9) ) #1 SMP Fri Sep 5 23:19:55 CEST 2008 PAT disabled. Not yet verified on this CPU type. BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000005f7d0000 (usable) BIOS-e820: 000000005f7d0000 - 000000005f7e5600 (reserved) BIOS-e820: 000000005f7e5600 - 000000005f7f8000 (ACPI NVS) BIOS-e820: 000000005f7f8000 - 000000005f800000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) last_pfn = 0x5f7d0 max_arch_pfn = 0x100000 kernel direct mapping tables up to 38000000 @ 7000-c000 DMI 2.4 present. ACPI: RSDP 000F7C30, 0024 (r2 HP ) ACPI: XSDT 5F7E57C4, 0074 (r1 HPQOEM SLIC-MPC 1 HP 1) ACPI: FACP 5F7E5684, 00F4 (r4 HP 30AA 3 HP 1) ACPI: DSDT 5F7E5AC0, FBEB (r1 HP nc6340 10000 MSFT 100000E) ACPI: FACS 5F7F7E80, 0040 ACPI: SLIC 5F7E5838, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) ACPI: HPET 5F7E59B0, 0038 (r1 HP 30AA 1 HP 1) ACPI: APIC 5F7E59E8, 0068 (r1 HP 30AA 1 HP 1) ACPI: MCFG 5F7E5A50, 003C (r1 HP 30AA 1 HP 1) ACPI: TCPA 5F7E5A8C, 0032 (r2 HP 30AA 1 HP 1) ACPI: SSDT 5F7F56AB, 0326 (r1 HP HPQSAT 1 MSFT 100000E) ACPI: SSDT 5F7F6226, 025F (r1 HP Cpu0Tst 3000 INTL 20050624) ACPI: SSDT 5F7F6485, 00A6 (r1 HP Cpu1Tst 3000 INTL 20050624) ACPI: SSDT 5F7F652B, 04D7 (r1 HP CpuPm 3000 INTL 20050624) ACPI: DMI detected: Hewlett-Packard 631MB HIGHMEM available. 896MB LOWMEM available. mapped low ram: 0 - 38000000 low ram: 00000000 - 38000000 bootmap 00008000 - 0000f000 (8 early reservations) ==> bootmem [0000000000 - 0038000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 0000521080] TEXT DATA BSS ==> [0000100000 - 0000521080] #4 [0000522000 - 0000525000] INIT_PG_TABLE ==> [0000522000 - 0000525000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00038000 HighMem 0x00038000 -> 0x0005f7d0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0005f7d0 On node 0 totalpages: 391023 free_area_init_node: node 0, pgdat c0445240, node_mem_map c1000000 DMA zone: 3967 pages, LIFO batch:0 Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 160480 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 60000000 (gap: 5f800000:9f400000) PERCPU: Allocating 39136 bytes of per cpu data NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 387967 Kernel command line: root=/dev/sda2 ro vga=0x318 resume=/dev/sda3 selinux=0 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Detected 1595.997 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1545812k/1564480k available (2591k kernel code, 17396k reserved, 902k data, 276k init, 646976k highmem) virtual kernel memory layout: fixmap : 0xfff9f000 - 0xfffff000 ( 384 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0470000 - 0xc04b5000 ( 276 kB) .data : 0xc0387fcc - 0xc0469940 ( 902 kB) .text : 0xc0100000 - 0xc0387fcc (2591 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.99 BogoMIPS (lpj=5319990) Security Framework initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20080609 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3193.06 BogoMIPS (lpj=5320101) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (6386.05 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 620 bytes HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: Not using MMCONFIG. PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32 PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [C002] (0000:00) pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:08:00.0: PME# supported from D0 D3hot D3cold pci 0000:08:00.0: PME# disabled PCI: bridge 0000:00:1c.0 32bit mmio: [e80fffffe8000000, f7913a5400000280] PCI: bridge 0000:00:1c.2 io port: [5fff00004000, f7913e5400000004] PCI: bridge 0000:00:1c.2 32bit mmio: [e7ffffffe4000000, f7913e5400000004] PCI: bridge 0000:00:1c.3 io port: [3fff00002000, f791425400000004] PCI: bridge 0000:00:1c.3 32bit mmio: [e3ffffffe0000000, f791425400000004] pci 0000:02:06.0: supports D1 pci 0000:02:06.0: supports D2 pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot pci 0000:02:06.0: PME# disabled pci 0000:02:06.1: supports D1 pci 0000:02:06.1: supports D2 pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot pci 0000:02:06.1: PME# disabled pci 0000:02:0e.0: supports D1 pci 0000:02:0e.0: supports D2 pci 0000:02:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:0e.0: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 32bit mmio: [e83fffffe8100000, f7915a5400000200] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C096._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C102._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C115._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C118._PRT] ACPI: PCI Interrupt Link [C10E] (IRQs 10 *11) ACPI: PCI Interrupt Link [C10F] (IRQs *10 11) ACPI: PCI Interrupt Link [C110] (IRQs *10 11) ACPI: PCI Interrupt Link [C111] (IRQs *10 11) ACPI: PCI Interrupt Link [C12A] (IRQs *10 11) ACPI: PCI Interrupt Link [C12B] (IRQs 10 *11) ACPI: PCI Interrupt Link [C12C] (IRQs 10 11) *0, disabled. ACPI Exception (pci_link-0189): AE_NOT_FOUND, Evaluating _PRS [20080609] ACPI: Power Resource [C21A] (on) ACPI: Power Resource [C222] (off) ACPI: Power Resource [C321] (off) ACPI: Power Resource [C322] (off) ACPI: Power Resource [C323] (off) ACPI: Power Resource [C324] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xe0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x5f7fffff could not be reserved system 00:09: ioport range 0x500-0x57f has been reserved system 00:09: ioport range 0x800-0x80f has been reserved system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved system 00:0a: ioport range 0x4d0-0x4d1 has been reserved system 00:0a: ioport range 0x1000-0x107f has been reserved system 00:0a: ioport range 0x1100-0x113f has been reserved system 00:0a: ioport range 0x1200-0x121f has been reserved system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved system 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved system 00:0a: iomem range 0xfed20000-0xfed3ffff could not be reserved system 00:0a: iomem range 0xfed45000-0xfed8ffff could not be reserved system 00:0a: iomem range 0xfed90000-0xfed9afff could not be reserved system 00:0b: iomem range 0xfeda0000-0xfedbffff could not be reserved system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved pci 0000:02:06.0: BAR 9 too large: 0x00000000000000-0x00000003ffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: 0xe8000000-0xe80fffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:18 pci 0000:00:1c.2: IO window: 0x4000-0x5fff pci 0000:00:1c.2: MEM window: 0xe4000000-0xe7ffffff pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:20 pci 0000:00:1c.3: IO window: 0x2000-0x3fff pci 0000:00:1c.3: MEM window: 0xe0000000-0xe3ffffff pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03 pci 0000:02:06.0: IO window: 0x007000-0x0070ff pci 0000:02:06.0: IO window: 0x007400-0x0074ff pci 0000:02:06.0: MEM window: 0x60000000-0x63ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0x7000-0x7fff pci 0000:00:1e.0: MEM window: 0xe8100000-0xe83fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 bus: 00 index 0 io port: [ffff00000000, f78c8c00] bus: 00 index 1 mmio: [ffffffff00000000, f78c8c00] bus: 08 index 0 mmio: [0, f78c8c14f7913800] bus: 08 index 1 mmio: [e80fffffe8000000, f78c8c14f7913800] bus: 08 index 2 mmio: [0, f78c8c14f7913800] bus: 08 index 3 mmio: [0, f78c8c14f7913800] bus: 18 index 0 io port: [5fff00004000, f78c8c14f7913c00] bus: 18 index 1 mmio: [e7ffffffe4000000, f78c8c14f7913c00] bus: 18 index 2 mmio: [0, f78c8c14f7913c00] bus: 18 index 3 mmio: [0, f78c8c14f7913c00] bus: 20 index 0 io port: [3fff00002000, f78c8c14f7914000] bus: 20 index 1 mmio: [e3ffffffe0000000, f78c8c14f7914000] bus: 20 index 2 mmio: [0, f78c8c14f7914000] bus: 20 index 3 mmio: [0, f78c8c14f7914000] bus: 02 index 0 io port: [7fff00007000, f78c8c14f7915800] bus: 02 index 1 mmio: [e83fffffe8100000, f78c8c14f7915800] bus: 02 index 2 mmio: [0, f78c8c14f7915800] bus: 02 index 3 io port: [ffff00000000, f78c8c14f7915800] bus: 02 index 4 mmio: [ffffffff00000000, f78c8c14f7915800] bus: 03 index 0 io port: [70ff00007000, f78c8614f7916c00] bus: 03 index 1 io port: [74ff00007400, f78c8614f7916c00] bus: 03 index 2 mmio: [3ffffff00000000, f78c8614f7916c00] bus: 03 index 3 mmio: [63ffffff60000000, f78c8614f7916c00] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 audit: initializing netlink socket (disabled) type=2000 audit(1220657292.366:1): initialized highmem bounce pool size: 64 pages msgmni has been set to 1757 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.2: found MSI capability pci_express 0000:00:1c.2:pcie00: allocate port service pci_express 0000:00:1c.2:pcie02: allocate port service pci_express 0000:00:1c.2:pcie03: allocate port service pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: found MSI capability pci_express 0000:00:1c.3:pcie00: allocate port service pci_express 0000:00:1c.3:pcie02: allocate port service pci_express 0000:00:1c.3:pcie03: allocate port service vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 6144k, total 7872k vesafb: mode is 1024x768x32, linelength=4096, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device ACPI: SSDT 5F7F5A99, 023D (r1 HP Cpu0Ist 3000 INTL 20050624) ACPI: SSDT 5F7F5D5B, 04CB (r1 HP Cpu0Cst 3001 INTL 20050624) ACPI: CPU0 (power states: C1[C1] C2[C2]) processor ACPI0007:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 5F7F59D1, 00C8 (r1 HP Cpu1Ist 3000 INTL 20050624) ACPI: SSDT 5F7F5CD6, 0085 (r1 HP Cpu1Cst 3000 INTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2]) processor ACPI0007:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ0] (50 C) Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [TZ1] (48 C) thermal LNXTHERM:03: registered as thermal_zone2 ACPI: Thermal Zone [TZ2] (47 C) thermal LNXTHERM:04: registered as thermal_zone3 ACPI: Thermal Zone [TZ3] (20 C) thermal LNXTHERM:05: registered as thermal_zone4 ACPI: Thermal Zone [TZ4] (40 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found hpet_resources: 0xfed00000 is busy intel_rng: FWH not detected Serial: 8250/16550 driver4 ports, IRQ sharing enabled brd: module loaded Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x01) pci 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 piix 0000:00:1f.1: IDE port disabled piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x60a0-0x60a7 Probing IDE interface ide0... hda: MATSHITADVD-RAM UJ-840S, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: MWDMA2 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ahci 0000:00:1f.2: quirky BIOS, skipping spindown on poweroff ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xe8585000 port 0xe8585100 irq 220 ata2: DUMMY ata3: DUMMY ata4: DUMMY ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ATA-7: ST9120822AS, 3.ALC, max UDMA/133 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/133 ata1.00: configured for UDMA/133 ata1: EH complete scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.AL PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk PNP: PS/2 Controller [PNP0303:C217,PNP0f13:C218] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder Marking TSC unstable due to TSC halts in idle cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 input: AT Translated Set 2 keyboard as /class/input/input0 Using IPI No-Shortcut mode PM: Resume from partition /dev/sda3 PM: Checking hibernation image. PM: Resume from disk failed. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 276k freed Write protecting the kernel text: 2592k Write protecting the kernel read-only data: 736k Linux agpgart interface v0.103 input: Power Button (FF) as /class/input/input1 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [C23F] input: Lid Switch as /class/input/input3 agpgart-intel 0000:00:00.0: Intel 945GM Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 ACPI: Lid Switch [C238] ACPI: Battery Slot [C1BC] (battery absent) ACPI: AC Adapter [C1BA] (on-line) ACPI: Battery Slot [C1BB] (battery absent) ACPI: Transitioning device [C325] to D3 fan PNP0C0B:00: registered as cooling_device2 ACPI: Fan [C325] (off) ACPI: Transitioning device [C326] to D3 fan PNP0C0B:01: registered as cooling_device3 ACPI: Fan [C326] (off) ACPI: Transitioning device [C327] to D3 fan PNP0C0B:02: registered as cooling_device4 ACPI: Fan [C327] (off) fan PNP0C0B:03: registered as cooling_device5 ACPI: Fan [C328] (on) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb input: PC Speaker as /class/input/input4 Yenta: CardBus bridge found at 0000:02:06.0 [103c:30aa] yenta_cardbus 0000:02:06.0: CardBus bridge, secondary bus 0000:03 yenta_cardbus 0000:02:06.0: IO window: 0x007000-0x0070ff yenta_cardbus 0000:02:06.0: IO window: 0x007400-0x0074ff yenta_cardbus 0000:02:06.0: PREFETCH window: 0x64000000-0x643fffff yenta_cardbus 0000:02:06.0: MEM window: 0x60000000-0x63ffffff USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006020 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 Yenta: ISA IRQ mask 0x0000, PCI irq 18 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff cs: IO port probe 0x7000-0x7fff: clean. pcmcia: parent PCI bridge Memory window: 0xe8100000 - 0xe83fffff rtc0: alarms up to one month, y3k, hpet irqs Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000 serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input5 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006040 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-1: new full speed USB device using uhci_hcd and address 2 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006060 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. usb 1-1: configuration #1 chosen from 1 choice uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006080 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:1b.0: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe8584000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected Bluetooth: Core ver 2.12 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.10 hci_usb_probe: Can't set isoc interface settings usbcore: registered new interface driver hci_usb ohci1394 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e8101000-e81017ff] Max Packet=[2048] IR/IT contexts=[4/8] b44 0000:02:0e.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 usb 1-1: USB disconnect, address 2 ssb: Sonics Silicon Backplane found on PCI device 0000:02:0e.0 b44.c:v2.0 eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:17:08:2f:16:2e usb 1-1: new full speed USB device using uhci_hcd and address 3 usb 1-1: configuration #1 chosen from 1 choice Adding 3421836k swap on /dev/sda3. Priority:-1 extents:1 across:3421836k EXT3 FS on sda2, internal journal loop: module loaded fuse init (API version 7.9) device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks iwl3945: Copyright(c) 2003-2008 Intel Corporation iwl3945 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 iwl3945 0000:08:00.0: setting latency timer to 64 iwl3945: Detected Intel Wireless WiFi Link 3945ABG iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels phy0: Selected rate control algorithm 'iwl-3945-rs' iwl3945 0000:08:00.0: PCI INT A disabled vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Successfully done. vboxdrv: Found 2 processor cores. vboxdrv: fAsync=0 u64DiffCores=3036. vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 1.6.4 (interface 0x00080000). Bluetooth: L2CAP ver 2.10 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html