Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 3.14.0-rc2-terion-00038-g5d51320 (hackman@terion) (gcc version 4.8.2 (GCC) ) #103 SMP PREEMPT Wed May 6 00:12:12 EEST 2015 KERNEL supported cpus: Intel GenuineIntel NSC Geode by NSC Cyrix CyrixInstead Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC Disabled fast string operations e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000ba99efff] usable BIOS-e820: [mem 0x00000000ba99f000-0x00000000bae9efff] reserved BIOS-e820: [mem 0x00000000bae9f000-0x00000000baf9efff] ACPI NVS BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000ffd20000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000023e5fffff] usable NX (Execute Disable) protection: active SMBIOS 2.6 present. DMI: LENOVO 42404JG/42404JG, BIOS 8AET49WW (1.29 ) 07/11/2011 e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable e820: last_pfn = 0x23e600 max_arch_pfn = 0x1000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 0BC000000 mask FFC000000 uncachable 3 base 0BB000000 mask FFF000000 uncachable 4 base 100000000 mask F00000000 write-back 5 base 200000000 mask FC0000000 write-back 6 base 23F000000 mask FFF000000 uncachable 7 base 23E800000 mask FFF800000 uncachable 8 base 23E600000 mask FFFE00000 uncachable 9 base 0FFC00000 mask FFFC00000 write-protect x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Scanning 1 areas for low memory corruption initial memory mapped: [mem 0x00000000-0x01ffffff] Base memory trampoline at [c0099000] 99000 size 16384 reserving inaccessible SNB gfx pages init_memory_mapping: [mem 0x00000000-0x000fffff] [mem 0x00000000-0x000fffff] page 4k init_memory_mapping: [mem 0x37800000-0x379fffff] [mem 0x37800000-0x379fffff] page 2M init_memory_mapping: [mem 0x34000000-0x377fffff] [mem 0x34000000-0x377fffff] page 2M init_memory_mapping: [mem 0x00100000-0x33ffffff] [mem 0x00100000-0x001fffff] page 4k [mem 0x00200000-0x33ffffff] page 2M init_memory_mapping: [mem 0x37a00000-0x37bfdfff] [mem 0x37a00000-0x37bfdfff] page 4k BRK [0x01a9d000, 0x01a9dfff] PGTABLE ACPI: RSDP 000f00e0 000024 (v02 LENOVO) ACPI: XSDT baffe120 0000A4 (v01 LENOVO TP-8A 00001290 PTEC 00000002) ACPI: FACP bafe9000 0000F4 (v04 LENOVO TP-8A 00001290 PTL 00000002) ACPI: DSDT bafec000 00DFE6 (v01 LENOVO TP-8A 00001290 INTL 20061109) ACPI: FACS baf2d000 000040 ACPI: SLIC baffd000 000176 (v01 LENOVO TP-8A 00001290 PTEC 00000001) ACPI: SSDT baffc000 000249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109) ACPI: SSDT baffb000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109) ACPI: SSDT baffa000 000797 (v01 LENOVO SataAhci 00001000 INTL 20061109) ACPI: HPET bafe8000 000038 (v01 LENOVO TP-8A 00001290 PTL 00000002) ACPI: APIC bafe7000 000098 (v01 LENOVO TP-8A 00001290 PTL 00000002) ACPI: MCFG bafe6000 00003C (v01 LENOVO TP-8A 00001290 PTL 00000002) ACPI: ECDT bafe5000 000052 (v01 LENOVO TP-8A 00001290 PTL 00000002) ACPI: ASF! bafeb000 0000A5 (v32 LENOVO TP-8A 00001290 PTL 00000002) ACPI: TCPA bafe4000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001) ACPI: SSDT bafe3000 000B2F (v01 PmRef Cpu0Ist 00003000 INTL 20061109) ACPI: SSDT bafe2000 000996 (v01 PmRef CpuPm 00003000 INTL 20061109) ACPI: UEFI bafe1000 00003E (v01 LENOVO TP-8A 00001290 PTL 00000002) ACPI: UEFI bafe0000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) ACPI: UEFI bafdf000 00027E (v01 LENOVO TP-8A 00001290 PTL 00000002) ACPI: Local APIC address 0xfee00000 8298MB HIGHMEM available. 891MB LOWMEM available. mapped low ram: 0 - 37bfe000 low ram: 0 - 37bfe000 BRK [0x01a9e000, 0x01a9efff] PGTABLE Zone ranges: DMA [mem 0x00001000-0x00ffffff] Normal [mem 0x01000000-0x37bfdfff] HighMem [mem 0x37bfe000-0x3e5fffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009cfff] node 0: [mem 0x00100000-0xba99efff] node 0: [mem 0xbafff000-0xbaffffff] node 0: [mem 0x00000000-0x3e5fffff] On node 0 totalpages: 2068284 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3996 pages, LIFO batch:0 Normal zone: 1752 pages used for memmap Normal zone: 224254 pages, LIFO batch:31 HighMem zone: 14376 pages used for memmap HighMem zone: 1840034 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information smpboot: Allowing 8 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 13 pages/cpu @f3b6f000 s32256 r0 d20992 u53248 pcpu-alloc: s32256 r0 d20992 u53248 alloc=13*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2066500 Kernel command line: BOOT_IMAGE=/bzImage-bi root=/dev/sda2 ro PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing CPU#0 xsave: enabled xstate_bv 0x7, cntxt size 0x340 Initializing HighMem for node 0 (00037bfe:0023e600) Initializing Movable for node 0 (00000000:00000000) Memory: 8194708K/8273136K available (6328K kernel code, 411K rwdata, 2756K rodata, 572K init, 700K bss, 78428K reserved, 7360132K highmem) virtual kernel memory layout: fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) pkmap : 0xffc00000 - 0xffe00000 (2048 kB) vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) .init : 0xc1948000 - 0xc19d7000 ( 572 kB) .data : 0xc162e4c8 - 0xc1947e00 (3174 kB) .text : 0xc1000000 - 0xc162e4c8 (6329 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Preemptible hierarchical RCU implementation. Hierarchical RCU autobalancing is disabled. RCU dyntick-idle grace-period acceleration is enabled. NR_IRQS:2304 nr_irqs:744 16 CPU 0 irqstacks, hard=f340a000 soft=f340c000 ACPI: Core revision 20131218 ACPI: All ACPI Tables successfully acquired Console: colour VGA+ 80x25 console [tty0] enabled allocated 16777216 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups tsc: Fast TSC calibration using PIT tsc: Detected 1993.538 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 3987.07 BogoMIPS (lpj=1993538) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 512 Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys blkio Initializing cgroup subsys perf_event Initializing cgroup subsys hugetlb Disabled fast string operations CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) mce: CPU supports 9 MCE banks CPU0: Thermal monitoring enabled (TM1) Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 tlb_flushall_shift: 6 Freeing SMP alternatives memory: 24K (c19d7000 - c19dd000) Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 smpboot: CPU0: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (fam: 06, model: 2a, stepping: 07) TSC deadline timer enabled Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 0000ffffffffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f CPU 1 irqstacks, hard=f34d2000 soft=f34d4000 x86: Booting SMP configuration: .... node #0, CPUs: #1 Initializing CPU#1 Disabled fast string operations CPU 2 irqstacks, hard=f34ee000 soft=f34f0000 #2 Initializing CPU#2 Disabled fast string operations CPU 3 irqstacks, hard=f2106000 soft=f2108000 #3 Initializing CPU#3 Disabled fast string operations CPU 4 irqstacks, hard=f2112000 soft=f2114000 #4 Initializing CPU#4 Disabled fast string operations CPU 5 irqstacks, hard=f211e000 soft=f2128000 #5 Initializing CPU#5 Disabled fast string operations CPU 6 irqstacks, hard=f215a000 soft=f215c000 #6 Initializing CPU#6 Disabled fast string operations CPU 7 irqstacks, hard=f216e000 soft=f2170000 #7 Initializing CPU#7 Disabled fast string operations x86: Booted up 1 node, 8 CPUs smpboot: Total of 8 processors activated (31896.60 BogoMIPS) devtmpfs: initialized PM: Registering ACPI NVS region [mem 0xbae9f000-0xbaf9efff] (1048576 bytes) kworker/u16:0 (43) used greatest stack depth: 6996 bytes left pinctrl core: initialized pinctrl subsystem regulator-dummy: no parameters NET: Registered protocol family 16 cpuidle: using governor menu ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type PCI registered acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI : EC: EC description table is found, configuring boot EC [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT bae8c018 0008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) ACPI: SSDT bae8da98 000303 (v01 PmRef ApIst 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20061109) ACPI: SSDT bae8bd98 000119 (v01 PmRef ApCst 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20061109) ACPI: Interpreter enabled ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: Power Resource [PUBS] (on) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-fe] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 pci 0000:00:02.0: reg 0x10: [mem 0xf1400000-0xf17fffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 pci 0000:00:16.0: reg 0x10: [mem 0xf3a25000-0xf3a2500f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 pci 0000:00:19.0: reg 0x10: [mem 0xf3a00000-0xf3a1ffff] pci 0000:00:19.0: reg 0x14: [mem 0xf3a2b000-0xf3a2bfff] pci 0000:00:19.0: reg 0x18: [io 0x6080-0x609f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: System wakeup disabled by ACPI pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 pci 0000:00:1a.0: reg 0x10: [mem 0xf3a2a000-0xf3a2a3ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: System wakeup disabled by ACPI pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 pci 0000:00:1b.0: reg 0x10: [mem 0xf3a20000-0xf3a23fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: System wakeup disabled by ACPI pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: System wakeup disabled by ACPI pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 pci 0000:00:1d.0: reg 0x10: [mem 0xf3a29000-0xf3a293ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: System wakeup disabled by ACPI pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100 pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 pci 0000:00:1f.2: reg 0x10: [io 0x60a8-0x60af] pci 0000:00:1f.2: reg 0x14: [io 0x60bc-0x60bf] pci 0000:00:1f.2: reg 0x18: [io 0x60a0-0x60a7] pci 0000:00:1f.2: reg 0x1c: [io 0x60b8-0x60bb] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f] pci 0000:00:1f.2: reg 0x24: [mem 0xf3a28000-0xf3a287ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 pci 0000:00:1f.3: reg 0x10: [mem 0xf3a24000-0xf3a240ff 64bit] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] pci 0000:01:00.0: [10de:1057] type 00 class 0x030000 pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000 pci 0000:03:00.0: reg 0x10: [mem 0xf3900000-0xf3901fff 64bit] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PCI bridge to [bus 03] pci 0000:00:1c.1: bridge window [mem 0xf3900000-0xf39fffff] acpiphp: Slot [1] registered pci 0000:00:1c.3: PCI bridge to [bus 05-0c] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.3: bridge window [mem 0xf3100000-0xf38fffff] pci 0000:00:1c.3: bridge window [mem 0xf1800000-0xf1ffffff 64bit pref] pci 0000:0d:00.0: [1180:e823] type 00 class 0x088001 pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. pci 0000:0d:00.0: reg 0x10: [mem 0xf2801000-0xf28010ff] pci 0000:0d:00.0: supports D1 D2 pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0d:00.3: [1180:e832] type 00 class 0x0c0010 pci 0000:0d:00.3: reg 0x10: [mem 0xf2800000-0xf28007ff] pci 0000:0d:00.3: supports D1 D2 pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:1c.4: PCI bridge to [bus 0d] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.4: bridge window [mem 0xf2800000-0xf30fffff] pci 0000:00:1c.4: bridge window [mem 0xf2000000-0xf27fffff 64bit pref] pci_bus 0000:00: on NUMA node 0 ACPI: Enabled 4 GPEs in block 00 to 3F ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:00.0 vgaarb: no bridge control possible 0000:00:02.0 SCSI subsystem initialized libata version 3.00 loaded. ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered wmi: Mapper loaded Advanced Linux Sound Architecture Driver Initialized. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] e820: reserve RAM buffer [mem 0xba99f000-0xbbffffff] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff] e820: reserve RAM buffer [mem 0x23e600000-0x23fffffff] NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switched to clocksource refined-jiffies FS-Cache: Loaded CacheFiles: Loaded pnp: PnP ACPI init ACPI: bus type PNP registered system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved system 00:00: [mem 0x000cc000-0x000cffff] has been reserved system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved system 00:00: [mem 0x000dc000-0x000dffff] has been reserved system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved system 00:00: [mem 0x000ec000-0x000effff] could not be reserved system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) system 00:01: [io 0x0400-0x047f] could not be reserved system 00:01: [io 0x0500-0x057f] has been reserved system 00:01: [io 0x0800-0x080f] has been reserved system 00:01: [io 0x15e0-0x15ef] has been reserved system 00:01: [io 0x1600-0x167f] has been reserved system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved system 00:01: [mem 0x00000000-0x00000fff] could not be reserved system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:03: [dma 4] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active) pnp: PnP ACPI: found 9 devices ACPI: bus type PNP unregistered Switched to clocksource acpi_pm pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.1: PCI bridge to [bus 03] pci 0000:00:1c.1: bridge window [mem 0xf3900000-0xf39fffff] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.3: bridge window [mem 0xf3100000-0xf38fffff] pci 0000:00:1c.3: bridge window [mem 0xf1800000-0xf1ffffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 0d] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.4: bridge window [mem 0xf2800000-0xf30fffff] pci 0000:00:1c.4: bridge window [mem 0xf2000000-0xf27fffff 64bit pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] pci_bus 0000:03: resource 1 [mem 0xf3900000-0xf39fffff] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] pci_bus 0000:05: resource 1 [mem 0xf3100000-0xf38fffff] pci_bus 0000:05: resource 2 [mem 0xf1800000-0xf1ffffff 64bit pref] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff] pci_bus 0000:0d: resource 1 [mem 0xf2800000-0xf30fffff] pci_bus 0000:0d: resource 2 [mem 0xf2000000-0xf27fffff 64bit pref] NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP: reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS 64 bytes, default 64 RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer Scanning for low memory corruption every 60 seconds futex hash table entries: 2048 (order: 5, 131072 bytes) bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages FS-Cache: Netfs 'cifs' registered for caching Key type cifs.idmap registered msgmni has been set to 1630 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: irq 40 for MSI/MSI-X pci_hotplug: PCI Hot Plug PCI Core version: 0.5 intel_idle: MWAIT substates: 0x21120 intel_idle: v0.4 model 0x2A intel_idle: lapic_timer_reliable_states 0xffffffff ACPI: AC Adapter [AC] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (61 C) GHES: HEST is not enabled! ERST DBG: ERST support is disabled. ACPI: Battery Slot [BAT0] (battery present) hpet_acpi_add: no address or irqs in _CRS Non-volatile memory driver v1.3 Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 loop: module loaded ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: irq 41 for MSI/MSI-X ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xf3a28000 port 0xf3a28100 irq 41 ata2: SATA max UDMA/133 abar m2048@0xf3a28000 port 0xf3a28180 irq 41 ata3: DUMMY ata4: SATA max UDMA/133 abar m2048@0xf3a28000 port 0xf3a28280 irq 41 ata5: SATA max UDMA/133 abar m2048@0xf3a28000 port 0xf3a28300 irq 41 ata6: DUMMY VFIO - User Level meta-driver version: 0.3 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver unable to find transceiver ehci-pci 0000:00:1a.0: EHCI Host Controller ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci-pci 0000:00:1a.0: debug port 2 ehci-pci 0000:00:1a.0: cache line size of 64 is not supported ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3a2a000 ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.14.0-rc2-terion-00038-g5d51320 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected unable to find transceiver ehci-pci 0000:00:1d.0: EHCI Host Controller ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci-pci 0000:00:1d.0: debug port 2 ehci-pci 0000:00:1d.0: cache line size of 64 is not supported ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3a29000 ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 3.14.0-rc2-terion-00038-g5d51320 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver uhci_hcd: USB Universal Host Controller Interface driver usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver synaptics_usb rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt Intel P-state driver initializing. Intel pstate controlling: cpu 0 Intel pstate controlling: cpu 1 Intel pstate controlling: cpu 2 Intel pstate controlling: cpu 3 Intel pstate controlling: cpu 4 Intel pstate controlling: cpu 5 Intel pstate controlling: cpu 6 Intel pstate controlling: cpu 7 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 5) mmc0: no vqmmc regulator found mmc0: no vmmc regulator found mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA usbcore: registered new interface driver ushc sdhci-pltfm: SDHCI platform and OF driver helper input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver thinkpad_acpi: ThinkPad ACPI Extras v0.25 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 8AET49WW (1.29 ), EC unknown thinkpad_acpi: Lenovo ThinkPad T520, model 42404JG thinkpad_acpi: detected a 16-level brightness capable ThinkPad thinkpad_acpi: radio switch found; radios are enabled thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked thinkpad_acpi: warning: userspace override of important firmware LEDs is enabled thinkpad_acpi: Standard ACPI backlight interface available, not loading native one thinkpad_acpi: Console audio control enabled, mode: monitor (read only) input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5 hdaps: supported laptop not found! hdaps: driver init failed (ret=-19)! snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X Netfilter messages via NETLINK v0.30. ip_set: protocol 6 ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP: vegas registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 Key type dns_resolver registered Using IPI No-Shortcut mode registered taskstats version 1 ALSA device list: #5: ThinkPad Console Audio Control at EC reg 0x30, fw unknown hda_codec: CX20590: BIOS auto-probing. input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) usb 1-1: new high-speed USB device number 2 using ehci-pci ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ATA-9: INTEL SSDSC2CW240A3, 400i, max UDMA/133 ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW24 400i PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: Attached scsi generic sg0 type 0 sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk usb 1-1: New USB device found, idVendor=8087, idProduct=0024 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected usb 2-1: new high-speed USB device number 2 using ehci-pci usb 2-1: New USB device found, idVendor=8087, idProduct=0024 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata2.00: ATA-8: TOSHIBA MK5061GSY, MC102E, max UDMA/100 ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata2.00: configured for UDMA/100 scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK5061GS MC10 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: Attached scsi generic sg1 type 0 usb 1-1.2: new full-speed USB device number 3 using ehci-pci sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 > sdb4 sd 1:0:0:0: [sdb] Attached SCSI disk usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.2: Product: USB Receiver usb 1-1.2: Manufacturer: Logitech logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input2 input: Logitech Unifying Device. Wireless PID:1028 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input12 logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:1a.0-1.2:1 tsc: Refined TSC clocksource calibration: 1993.525 MHz usb 1-1.3: new full-speed USB device number 4 using ehci-pci ata4: SATA link down (SStatus 0 SControl 300) usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016 usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.3: Product: Biometric Coprocessor usb 1-1.3: Manufacturer: UPEK usb 1-1.4: new full-speed USB device number 5 using ehci-pci psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 578367 psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.4: Product: Broadcom Bluetooth Device usb 1-1.4: Manufacturer: Broadcom Corp usb 1-1.4: SerialNumber: 402CF455DFED input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 usb 1-1.6: new high-speed USB device number 6 using ehci-pci ata5: SATA link down (SStatus 0 SControl 300) md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217 usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.6: Product: Integrated Camera usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. usb 2-1.4: new high-speed USB device number 3 using ehci-pci usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911 usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1.4: Product: F5521gw usb 2-1.4: Manufacturer: Lenovo usb 2-1.4: SerialNumber: 4ED77A69D63CAF40 Switched to clocksource tsc psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input13 md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240) EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:2. devtmpfs: mounted Freeing unused kernel memory: 572K (c1948000 - c19d7000) Write protecting the kernel text: 6332k Write protecting the kernel read-only data: 2760k NX-protecting the kernel data: 3908k mount (1620) used greatest stack depth: 6316 bytes left touch (1634) used greatest stack depth: 6020 bytes left EXT4-fs (sda2): re-mounted. Opts: (null) udevd[1656]: starting version 182 rc.S (1619) used greatest stack depth: 5712 bytes left random: dd urandom read with 92 bits of entropy available dmesg (1696) used greatest stack depth: 5624 bytes left EXT2-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k e1000e: Copyright(c) 1999 - 2013 Intel Corporation. e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode e1000e 0000:00:19.0: irq 43 for MSI/MSI-X Bluetooth: Core ver 2.18 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized cfg80211: Calling CRDA to update world regulatory domain usbcore: registered new interface driver btusb Intel(R) Wireless WiFi driver for Linux, in-tree: Copyright(c) 2003- 2014 Intel Corporation iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control iwlwifi 0000:03:00.0: irq 44 for MSI/MSI-X ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95) pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG_.VID_ handle nouveau 0000:01:00.0: enabling device (0004 -> 0007) [drm] hdmi device not found 1 0 1 nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0d9170a1 nouveau [ DEVICE][0000:01:00.0] Chipset: GF119 (NVD9) nouveau [ DEVICE][0000:01:00.0] Family : NVD0 nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... firewire_ohci 0000:0d:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11 iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm nouveau [ VBIOS][0000:01:00.0] ... signature not found nouveau [ VBIOS][0000:01:00.0] checking PROM for image... nouveau [ VBIOS][0000:01:00.0] ... signature not found nouveau [ VBIOS][0000:01:00.0] checking ACPI for image... iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device usbcore: registered new interface driver cdc_wdm cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' media: Linux media interface: v0.10 cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device Linux video capture interface: v2.00 usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217) input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input14 usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) random: nonblocking pool is initialized cfg80211: World regulatory domain updated: cfg80211: DFS Master region: unset cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) e1000e 0000:00:19.0 eth0: registered PHC clock e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:81:0a:2a e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000047f (\_SB_.PCI0.LPC_.PMIO) (20131218/utaddress-258) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver ACPI Warning: SystemIO range 0x00000540-0x0000054f conflicts with OpRegion 0x00000500-0x0000057f (\_SB_.PCI0.LPC_.LPIO) (20131218/utaddress-258) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver ACPI Warning: SystemIO range 0x00000530-0x0000053f conflicts with OpRegion 0x00000500-0x0000057f (\_SB_.PCI0.LPC_.LPIO) (20131218/utaddress-258) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver ACPI Warning: SystemIO range 0x00000500-0x0000052f conflicts with OpRegion 0x00000500-0x0000057f (\_SB_.PCI0.LPC_.LPIO) (20131218/utaddress-258) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver lpc_ich: Resource conflict(s) found affecting gpio_ich nouveau [ VBIOS][0000:01:00.0] ... appears to be valid nouveau [ VBIOS][0000:01:00.0] using image from ACPI nouveau [ VBIOS][0000:01:00.0] BIT signature found nouveau [ VBIOS][0000:01:00.0] version 75.19.1f.00.01 nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised nouveau [ VBIOS][0000:01:00.0] running init tables EXT4-fs (sdb6): warning: maximal mount count reached, running e2fsck is recommended EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null) nouveau 0000:01:00.0: irq 45 for MSI/MSI-X nouveau [ PMC][0000:01:00.0] MSI interrupts enabled nouveau W[ PFB][0000:01:00.0][0x00000000][f233b000] reclocking of this ram type unsupported nouveau [ PFB][0000:01:00.0] RAM type: DDR3 nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags nouveau [ VOLT][0000:01:00.0] GPU voltage: 850000uv nouveau [ PTHERM][0000:01:00.0] FAN control: none / external nouveau [ PTHERM][0000:01:00.0] fan management: automatic nouveau [ PTHERM][0000:01:00.0] internal sensor: yes nouveau [ CLK][0000:01:00.0] 07: core 270 MHz memory 405 MHz nouveau [ CLK][0000:01:00.0] 0f: core 810 MHz memory 800 MHz nouveau [ CLK][0000:01:00.0] --: core 270 MHz memory 405 MHz [TTM] Zone kernel: Available graphics memory: 417586 kiB [TTM] Zone highmem: Available graphics memory: 4097652 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator nouveau [ DRM] VRAM: 1024 MiB nouveau [ DRM] GART: 1048576 MiB nouveau [ DRM] TMDS table version 2.0 nouveau [ DRM] DCB version 4.0 nouveau [ DRM] DCB outp 00: 01800323 00010034 nouveau [ DRM] DCB outp 01: 02011300 00000000 nouveau [ DRM] DCB outp 02: 028223a6 0f220010 nouveau [ DRM] DCB outp 03: 02822362 00020010 nouveau [ DRM] DCB outp 04: 048333b6 0f220010 nouveau [ DRM] DCB outp 05: 04833372 00020010 nouveau [ DRM] DCB outp 06: 088443c6 0f220010 nouveau [ DRM] DCB outp 07: 08844382 00020010 nouveau [ DRM] DCB conn 00: 00000040 nouveau [ DRM] DCB conn 01: 00000100 nouveau [ DRM] DCB conn 02: 00101246 nouveau [ DRM] DCB conn 03: 00202346 nouveau [ DRM] DCB conn 04: 00410446 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. nouveau [ DRM] ACPI backlight interface available, not registering our own nouveau [ DRM] MM: using COPY0 for buffer copies firewire_core 0000:0d:00.3: created device fw0: GUID f0def1ff810a2aff, S400 nouveau 0000:01:00.0: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo f0daac00 Console: switching to colour frame buffer device 128x48 nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device nouveau 0000:01:00.0: registered panic notifier [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0 [drm] Memory usable by graphics device = 2048M i915 0000:00:02.0: irq 46 for MSI/MSI-X [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. vga_switcheroo: enabled vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none [drm] Wrong MCH_SSKPD value: 0x16040307 [drm] This can cause pipe underruns and display issues. [drm] Please upgrade your BIOS to fix this. fbcon: inteldrmfb (fb1) is primary device fbcon: Remapping primary device, fb1, to tty 1-63 update-mime-dat (1950) used greatest stack depth: 5380 bytes left i915 0000:00:02.0: fb1: inteldrmfb frame buffer device ACPI: Video Device [VID] (multi-head: yes rom: no post: no) acpi device:01: registered as cooling_device8 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15 ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no) acpi device:0b: registered as cooling_device9 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input16 [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off e1000e 0000:00:19.0: irq 43 for MSI/MSI-X e1000e 0000:00:19.0: irq 43 for MSI/MSI-X iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 udevd (1708) used greatest stack depth: 5000 bytes left fuse init (API version 7.22) wlan0: authenticate with 00:15:f2:eb:25:17 wlan0: send auth to 00:15:f2:eb:25:17 (try 1/3) wlan0: authenticated iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP wlan0: associate with 00:15:f2:eb:25:17 (try 1/3) wlan0: RX AssocResp from 00:15:f2:eb:25:17 (capab=0x431 status=0 aid=4) wlan0: associated NET: Registered protocol family 10 IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready wlan0: deauthenticating from 00:15:f2:eb:25:17 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: DFS Master region: unset cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) usb 1-1.4: USB disconnect, device number 5 PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 1:0:0:0: [sdb] Synchronizing SCSI cache sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 1:0:0:0: [sdb] Stopping disk sd 0:0:0:0: [sda] Stopping disk nouveau [ DRM] suspending display... nouveau [ DRM] unpinning framebuffer(s)... nouveau [ DRM] evicting buffers... nouveau [ DRM] waiting for kernel channels to go idle... nouveau [ DRM] suspending client object trees... nouveau [ DRM] suspending kernel object tree... PM: suspend of devices complete after 857.810 msecs PM: late suspend of devices complete after 0.215 msecs ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI e1000e 0000:00:19.0: System wakeup enabled by ACPI PM: noirq suspend of devices complete after 43.660 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... kvm: disabling virtualization on CPU1 smpboot: CPU 1 is now offline kvm: disabling virtualization on CPU2 smpboot: CPU 2 is now offline kvm: disabling virtualization on CPU3 smpboot: CPU 3 is now offline kvm: disabling virtualization on CPU4 smpboot: CPU 4 is now offline kvm: disabling virtualization on CPU5 smpboot: CPU 5 is now offline kvm: disabling virtualization on CPU6 smpboot: CPU 6 is now offline kvm: disabling virtualization on CPU7 smpboot: CPU 7 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... x86: Booting SMP configuration: smpboot: Booting Node 0 Processor 1 APIC 0x1 Initializing CPU#1 Disabled fast string operations kvm: enabling virtualization on CPU1 Intel pstate controlling: cpu 1 CPU1 is up smpboot: Booting Node 0 Processor 2 APIC 0x2 Initializing CPU#2 Disabled fast string operations kvm: enabling virtualization on CPU2 Intel pstate controlling: cpu 2 CPU2 is up smpboot: Booting Node 0 Processor 3 APIC 0x3 Initializing CPU#3 Disabled fast string operations kvm: enabling virtualization on CPU3 Intel pstate controlling: cpu 3 CPU3 is up smpboot: Booting Node 0 Processor 4 APIC 0x4 Initializing CPU#4 Disabled fast string operations kvm: enabling virtualization on CPU4 Intel pstate controlling: cpu 4 CPU4 is up smpboot: Booting Node 0 Processor 5 APIC 0x5 Initializing CPU#5 Disabled fast string operations kvm: enabling virtualization on CPU5 Intel pstate controlling: cpu 5 CPU5 is up smpboot: Booting Node 0 Processor 6 APIC 0x6 Initializing CPU#6 Disabled fast string operations kvm: enabling virtualization on CPU6 Intel pstate controlling: cpu 6 CPU6 is up smpboot: Booting Node 0 Processor 7 APIC 0x7 Initializing CPU#7 Disabled fast string operations kvm: enabling virtualization on CPU7 Intel pstate controlling: cpu 7 CPU7 is up ACPI: Waking up from system sleep state S3 ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. PM: noirq resume of devices complete after 109.570 msecs PM: early resume of devices complete after 0.123 msecs e1000e 0000:00:19.0: System wakeup disabled by ACPI e1000e 0000:00:19.0: irq 42 for MSI/MSI-X nouveau [ DRM] re-enabling device... nouveau [ DRM] resuming kernel object tree... nouveau [ VBIOS][0000:01:00.0] running init tables snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [drm] Wrong MCH_SSKPD value: 0x16040307 [drm] This can cause pipe underruns and display issues. [drm] Please upgrade your BIOS to fix this. nouveau [ VOLT][0000:01:00.0] GPU voltage: 850000uv nouveau [ PTHERM][0000:01:00.0] fan management: automatic nouveau [ CLK][0000:01:00.0] --: core 270 MHz memory 405 MHz nouveau [ DRM] resuming client object trees... nouveau [ DRM] resuming display... usb 1-1.2: reset full-speed USB device number 3 using ehci-pci ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: configured for UDMA/133 sd 0:0:0:0: [sda] Starting disk usb 1-1.3: reset full-speed USB device number 4 using ehci-pci ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata2.00: configured for UDMA/100 sd 1:0:0:0: [sdb] Starting disk usb 1-1.6: reset high-speed USB device number 6 using ehci-pci firewire_core 0000:0d:00.3: rediscovered device fw0 PM: resume of devices complete after 621.025 msecs Restarting tasks ... done. video LNXVIDEO:00: Restoring backlight state video LNXVIDEO:01: Restoring backlight state ata2.00: disabled ata2.00: detaching (SCSI 1:0:0:0) usb 2-1.4: USB disconnect, device number 3 end_request: I/O error, dev sdb, sector 0 sd 1:0:0:0: [sdb] Synchronizing SCSI cache sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 1:0:0:0: [sdb] Stopping disk sd 1:0:0:0: [sdb] START_STOP FAILED sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK usb 2-1.4: new high-speed USB device number 4 using ehci-pci e1000e 0000:00:19.0: irq 42 for MSI/MSI-X usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911 usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1.4: Product: F5521gw usb 2-1.4: Manufacturer: Lenovo usb 2-1.4: SerialNumber: 4ED77A69D63CAF40 e1000e 0000:00:19.0: irq 42 for MSI/MSI-X IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready usb 1-1.4: new full-speed USB device number 7 using ehci-pci usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.4: Product: Broadcom Bluetooth Device usb 1-1.4: Manufacturer: Broadcom Corp usb 1-1.4: SerialNumber: 402CF455DFED [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95) ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95) thinkpad_acpi: EC reports that Thermal Table has changed EXT4-fs error (device sdb6): __ext4_get_inode_loc:3904: inode #15335425: block 61341728: comm ls: unable to read itable block EXT4-fs warning (device sdb6): __ext4_read_dirblock:908: error reading directory block (ino 15335425, block 0) wlan0: authenticate with 00:15:f2:eb:25:17 wlan0: send auth to 00:15:f2:eb:25:17 (try 1/3) wlan0: authenticated iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP wlan0: associate with 00:15:f2:eb:25:17 (try 1/3) wlan0: RX AssocResp from 00:15:f2:eb:25:17 (capab=0x431 status=0 aid=4) wlan0: associated IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready EXT4-fs error (device sdb6): ext4_find_entry:1309: inode #15335425: comm DNS Resolver #1: reading directory lblock 0