Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.2 (root@server2) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Thu Mar 19 12:20:28 CET 2015
Command line: BOOT_IMAGE=Linux-3.19.2 ro root=801 root=/dev/sda1 rootfstype=ext4
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008c7ff] usable
BIOS-e820: [mem 0x000000000008c800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009934efff] usable
BIOS-e820: [mem 0x000000009934f000-0x000000009937efff] reserved
BIOS-e820: [mem 0x000000009937f000-0x000000009938efff] ACPI data
BIOS-e820: [mem 0x000000009938f000-0x00000000998a9fff] ACPI NVS
BIOS-e820: [mem 0x00000000998aa000-0x0000000099ffffff] reserved
BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 90BX0018IX/Aptio CRB, BIOS O07KT49AUS 12/18/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-E7FFF write-through
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FE0000000 write-back
  2 base 09A000000 mask FFE000000 uncachable
  3 base 09C000000 mask FFC000000 uncachable
  4 base 100000000 mask F80000000 write-back
  5 disabled
  6 disabled
  7 disabled
PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
e820: update [mem 0x9a000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x9934f max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd820-0x000fd82f] mapped at [ffff8800000fd820]
Base memory trampoline at [ffff880000086000] 86000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01803000, 0x01803fff] PGTABLE
BRK [0x01804000, 0x01804fff] PGTABLE
BRK [0x01805000, 0x01805fff] PGTABLE
init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
 [mem 0x15fe00000-0x15fffffff] page 2M
BRK [0x01806000, 0x01806fff] PGTABLE
init_memory_mapping: [mem 0x140000000-0x15fdfffff]
 [mem 0x140000000-0x15fdfffff] page 2M
init_memory_mapping: [mem 0x00100000-0x9934efff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x991fffff] page 2M
 [mem 0x99200000-0x9934efff] page 4k
init_memory_mapping: [mem 0x100000000-0x13fffffff]
 [mem 0x100000000-0x13fffffff] page 2M
BRK [0x01807000, 0x01807fff] PGTABLE
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0540 000024 (v02 LENOVO)
ACPI: XSDT 0x0000000099383080 00007C (v01 LENOVO TC-03    00001000 AMI  00010013)
ACPI: FACP 0x000000009938DAF0 00010C (v05 LENOVO TC-03    00001000 AMI  00010013)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20141107/tbfadt-618)
ACPI: DSDT 0x0000000099383188 00A966 (v02 LENOVO TC-03    00001000 INTL 20120913)
ACPI: FACS 0x00000000995A7F80 000040
ACPI: APIC 0x000000009938DC00 000072 (v03 LENOVO TC-03    00001000 AMI  00010013)
ACPI: FPDT 0x000000009938DC78 000044 (v01 LENOVO TC-03    00001000 AMI  00010013)
ACPI: MCFG 0x000000009938DCC0 00003C (v01 LENOVO TC-03    00001000 MSFT 00000097)
ACPI: LPIT 0x000000009938DD00 000104 (v01 LENOVO TC-03    00001000 VLV2 0100000D)
ACPI: MSDM 0x000000009938DE08 000055 (v03 LENOVO TC-03    00001000 AMI  00010013)
ACPI: HPET 0x000000009938DE60 000038 (v01 LENOVO TC-03    00001000 AMI. 00000005)
ACPI: SSDT 0x000000009938DE98 000763 (v01 LENOVO TC-03    00001000 INTL 20061109)
ACPI: SSDT 0x000000009938E600 000290 (v01 LENOVO TC-03    00001000 INTL 20061109)
ACPI: SSDT 0x000000009938E890 00017A (v01 LENOVO TC-03    00001000 INTL 20061109)
ACPI: UEFI 0x000000009938EA10 000042 (v01 LENOVO TC-03    00001000      00000000)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff88015b600000-ffff88015effffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x15fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0008bfff]
  node   0: [mem 0x00100000-0x9934efff]
  node   0: [mem 0x100000000-0x15fffffff]
Initmem setup node 0 [mem 0x00001000-0x15fffffff]
On node 0 totalpages: 1020634
  DMA zone: 56 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3979 pages, LIFO batch:0
  DMA32 zone: 8524 pages used for memmap
  DMA32 zone: 623439 pages, LIFO batch:31
  Normal zone: 5376 pages used for memmap
  Normal zone: 393216 pages, LIFO batch:31
x86/hpet: Will disable the HPET for this platform because it's not reliable
Reserving Intel graphics stolen memory at 0x9b000000-0x9effffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0008c000-0x0008cfff]
PM: Registered nosave memory: [mem 0x0008d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x9934f000-0x9937efff]
PM: Registered nosave memory: [mem 0x9937f000-0x9938efff]
PM: Registered nosave memory: [mem 0x9938f000-0x998a9fff]
PM: Registered nosave memory: [mem 0x998aa000-0x99ffffff]
PM: Registered nosave memory: [mem 0x9a000000-0x9affffff]
PM: Registered nosave memory: [mem 0x9b000000-0x9effffff]
PM: Registered nosave memory: [mem 0x9f000000-0xe00f7fff]
PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
PM: Registered nosave memory: [mem 0xfed02000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0x9f000000-0xe00f7fff] available for PCI devices
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88015fc00000 s78912 r8192 d31680 u524288
pcpu-alloc: s78912 r8192 d31680 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1006657
Kernel command line: BOOT_IMAGE=Linux-3.19.2 ro root=801 root=/dev/sda1 rootfstype=ext4
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Memory: 3942056K/4082536K available (4029K kernel code, 534K rwdata, 1624K rodata, 852K init, 640K bss, 140480K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
	CONFIG_RCU_FANOUT set to non-default value of 32
NR_IRQS:4352 nr_irqs:1024 16
Console: colour VGA+ 80x25
console [tty0] enabled
Maximum core-clock to bus-clock ratio: 0x1d
Resolved frequency ID: 0, frequency: 83200 KHz
TSC runs at 2412800 KHz
lapic_timer_frequency = 83200
tsc: Detected 2412.800 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4825.60 BogoMIPS (lpj=2412800)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
Freeing SMP alternatives memory: 20K (ffffffff8175c000 - ffffffff81761000)
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: Intel(R) Pentium(R) CPU  J2900  @ 2.41GHz (fam: 06, model: 37, stepping: 08)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000ffffffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19302.40 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x9938f000-0x998a9fff] (5353472 bytes)
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88015ADF4000 000506 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88015AC08800 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88015AC2EC00 00015F (v01 PmRef  ApIst    00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88015F2C84C0 00008D (v01 PmRef  ApCst    00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [PLPE] (on)
ACPI: Power Resource [PLPE] (on)
ACPI: Power Resource [FN00] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x006f]
pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0xa0000000-0xb0716fff]
pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff]
pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff pref]
pci 0000:00:02.0: reg 0x20: [io  0xf080-0xf087]
pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
pci 0000:00:13.0: reg 0x10: [io  0xf070-0xf077]
pci 0000:00:13.0: reg 0x14: [io  0xf060-0xf063]
pci 0000:00:13.0: reg 0x18: [io  0xf050-0xf057]
pci 0000:00:13.0: reg 0x1c: [io  0xf040-0xf043]
pci 0000:00:13.0: reg 0x20: [io  0xf020-0xf03f]
pci 0000:00:13.0: reg 0x24: [mem 0xb0716000-0xb07167ff]
pci 0000:00:13.0: PME# supported from D3hot
pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb0700000-0xb070ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0xb0500000-0xb05fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0xb0400000-0xb04fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xb0710000-0xb0713fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xb0714000-0xb071401f]
pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xb0604000-0xb0604fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xb0600000-0xb0603fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.2:   bridge window [mem 0xb0600000-0xb06fffff]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008c800-0x0008ffff]
e820: reserve RAM buffer [mem 0x9934f000-0x9bffffff]
Switched to clocksource refined-jiffies
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io  0x0680-0x069f] has been reserved
system 00:01: [io  0x0400-0x047f] has been reserved
system 00:01: [io  0x0500-0x05fe] has been reserved
system 00:01: [io  0x0600-0x061f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io  0x0a00-0x0a1f] has been reserved
system 00:02: [io  0x0a20-0x0a2f] has been reserved
system 00:02: [io  0x0a30-0x0a3f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:06: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:06: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:06: [mem 0xfed04000-0xfed04fff] has been reserved
system 00:06: [mem 0xfed0c000-0xfed0ffff] has been reserved
system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:06: [mem 0xfef00000-0xfeffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
Switched to clocksource acpi_pm
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.3: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 8: no space for [mem size 0x00200000]
pci 0000:00:1c.0: BAR 8: failed to assign [mem size 0x00200000]
pci 0000:00:1c.0: BAR 9: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.0: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.2: BAR 9: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.2: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.3: BAR 8: no space for [mem size 0x00200000]
pci 0000:00:1c.3: BAR 8: failed to assign [mem size 0x00200000]
pci 0000:00:1c.3: BAR 9: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.3: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.3: BAR 7: assigned [io  0x2000-0x2fff]
pci 0000:00:1c.3: BAR 8: no space for [mem size 0x00200000]
pci 0000:00:1c.3: BAR 8: failed to assign [mem size 0x00200000]
pci 0000:00:1c.3: BAR 9: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.3: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.2: BAR 9: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.2: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.0: BAR 8: no space for [mem size 0x00200000]
pci 0000:00:1c.0: BAR 8: failed to assign [mem size 0x00200000]
pci 0000:00:1c.0: BAR 9: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.0: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.2:   bridge window [mem 0xb0600000-0xb06fffff]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
pci_bus 0000:00: resource 4 [io  0x0000-0x006f]
pci_bus 0000:00: resource 5 [io  0x0078-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: resource 10 [mem 0xa0000000-0xb0716fff]
pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xb0600000-0xb06fffff]
pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x9534f000-0x9934f000] (64MB) mapped at [ffff88009534f000-ffff88009934efff]
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1426848844.976:1): initialized
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (27 C)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
hpet: number irqs doesn't agree with number of timers
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:13.0: version 3.0
ahci 0000:00:13.0: controller can't do DEVSLP, turning off
ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso 
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m2048@0xb0716000 port 0xb0716100 irq 87
ata2: SATA max UDMA/133 abar m2048@0xb0716000 port 0xb0716180 irq 87
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
TCP: veno registered
NET: Registered protocol family 17
registered taskstats version 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
PM: Hibernation image not present or could not be loaded.
ALSA device list:
  No soundcards found.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: MATSHITA DVD-RAM SW840, V801, max UDMA/100
ata2.00: configured for UDMA/100
ata1.00: HPA detected: current 312579695, native 312581808
ata1.00: ATA-7: ST3160212AS, 3.AAE, max UDMA/133
ata1.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
tsc: Refined TSC clocksource calibration: 2416.666 MHz
Switched to clocksource tsc
floppy0: no floppy controllers found
work still pending
scsi 0:0:0:0: Direct-Access     ATA      ST3160212AS      E    PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM SW840    V801 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
 sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 852K (ffffffff81687000 - ffffffff8175c000)
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 56K (ffff8800013f2000 - ffff880001400000)
Freeing unused kernel memory: 424K (ffff880001596000 - ffff880001600000)
random: nonblocking pool is initialized
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
input: PC Speaker as /devices/platform/pcspkr/input/input6
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000014000, b8:ae:ed:26:80:bb, XID 0c000880 IRQ 89
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 0000:02:00.0 eth1: renamed from eth0
sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    mono: mono_out=0x0
sound hdaudioC0D0:    inputs:
sound hdaudioC0D0:      Front Mic=0x19
sound hdaudioC0D0:      Rear Mic=0x18
sound hdaudioC0D0:      Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
mousedev: PS/2 mouse device common for all mice
Adding 1365488k swap on /dev/sda5.  Priority:-1 extents:1 across:1365488k 
EXT4-fs (sda1): re-mounted. Opts: (null)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
st: Version 20101219, fixed bufsize 32768, s/g segs 256
softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
loop: module loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
usbcore: registered new interface driver usb-storage
8139too: 8139too Fast Ethernet driver 0.9.28
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
acpi device:09: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 200x75
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
it87: Found IT8728F chip at 0xa30, revision 0
it87: Beeping is supported
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
r8169 0000:02:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2
r8169 0000:02:00.0 eth1: unable to load firmware patch rtl_nic/rtl8168g-2.fw (-2)
r8169 0000:02:00.0 eth1: link down
r8169 0000:02:00.0 eth1: link down
r8169 0000:02:00.0 eth1: link up
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.23)
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
lp: driver loaded but no devices found
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
device eth1 entered promiscuous mode
colord-sane[3703]: segfault at 0 ip 00007f7e4a536464 sp 00007ffcb7ca2b00 error 4 in libc-2.13.so[7f7e4a48f000+181000]