[ 0.000000] Linux version 3.19.1-GCnew4AwithTOI (root@QUICKHEAD.HEADGROUP) (gcc version 4.8.3 20141208 [gcc-4_8-branch revision 218481] (SUSE Linux) ) #17 SMP PREEMPT Sat Mar 14 21:59:08 CET 2015 [ 0.000000] Command line: root=/dev/sda7 rootflags=noatime,nodiratime resume=/dev/sdb10 fastboot splash=silent quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] BIOS disabled fast string operation, re-enabled sucessfully. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000ef000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b5bcffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b5bd0000-0x00000000b5bdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b5be0000-0x00000000b5be8fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b5be9000-0x00000000b5beafff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b5beb000-0x00000000b99e1fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b99e2000-0x00000000b9be1fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b9be2000-0x00000000b9e92fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b9e93000-0x00000000b9e9afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b9e9b000-0x00000000b9ebefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b9ebf000-0x00000000b9ecefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b9ecf000-0x00000000b9fcefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b9fcf000-0x00000000b9ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b9fff000-0x00000000b9ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ba000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Hewlett-Packard HP Compaq 6730b (KU489ET#ABD)/30DD, BIOS 68PDD Ver. F.20 12/07/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 100000000 mask FC0000000 write-back [ 0.000000] 4 base 0B5BD0000 mask FFFFF0000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01bfa000, 0x01bfafff] PGTABLE [ 0.000000] BRK [0x01bfb000, 0x01bfbfff] PGTABLE [ 0.000000] BRK [0x01bfc000, 0x01bfcfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff] [ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M [ 0.000000] BRK [0x01bfd000, 0x01bfdfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x120000000-0x13fdfffff] [ 0.000000] [mem 0x120000000-0x13fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xb5bcffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xb59fffff] page 2M [ 0.000000] [mem 0xb5a00000-0xb5bcffff] page 4k [ 0.000000] init_memory_mapping: [mem 0xb5be0000-0xb5be8fff] [ 0.000000] [mem 0xb5be0000-0xb5be8fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xb5beb000-0xb99e1fff] [ 0.000000] [mem 0xb5beb000-0xb5bfffff] page 4k [ 0.000000] [mem 0xb5c00000-0xb97fffff] page 2M [ 0.000000] [mem 0xb9800000-0xb99e1fff] page 4k [ 0.000000] BRK [0x01bfe000, 0x01bfefff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xb9be2000-0xb9e92fff] [ 0.000000] [mem 0xb9be2000-0xb9bfffff] page 4k [ 0.000000] [mem 0xb9c00000-0xb9dfffff] page 2M [ 0.000000] [mem 0xb9e00000-0xb9e92fff] page 4k [ 0.000000] BRK [0x01bff000, 0x01bfffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xb9e9b000-0xb9ebefff] [ 0.000000] [mem 0xb9e9b000-0xb9ebefff] page 4k [ 0.000000] init_memory_mapping: [mem 0xb9fff000-0xb9ffffff] [ 0.000000] [mem 0xb9fff000-0xb9ffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff] [ 0.000000] [mem 0x100000000-0x11fffffff] page 2M [ 0.000000] RAMDISK: [mem 0x37145000-0x37feffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F68C0 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000B9FFE120 000084 (v01 HPQOEM SLIC-MPC 0000000F 01000013) [ 0.000000] ACPI: FACP 0x00000000B9FFC000 0000F4 (v03 HPQOEM 30DD 0000000F HP 00000001) [ 0.000000] ACPI: DSDT 0x00000000B9FDD000 0197AD (v01 HPQOEM 30DD 00000001 INTL 20060912) [ 0.000000] ACPI: FACS 0x00000000B9FAE000 000040 [ 0.000000] ACPI: HPET 0x00000000B9FFB000 000038 (v01 HPQOEM 30DD 00000001 HP 00000001) [ 0.000000] ACPI: APIC 0x00000000B9FFA000 000084 (v01 HPQOEM 30DD 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0x00000000B9FF9000 00003C (v01 HPQOEM 30DD 00000001 HP 00000001) [ 0.000000] ACPI: ASF! 0x00000000B9FF8000 0000A0 (v32 HPQOEM 30DD 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000B9FDA000 0002DD (v01 HPQOEM SataAhci 00001000 INTL 20060912) [ 0.000000] ACPI: SLIC 0x00000000B9FD8000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000B9FD7000 000059 (v01 HPQOEM HPQNLP 00000001 INTL 20060912) [ 0.000000] ACPI: DMAR 0x00000000B9FD6000 0000F8 (v01 ? 00000001 00000000) [ 0.000000] ACPI: SSDT 0x00000000B9FD5000 00066C (v01 PmRef CpuPm 00003000 INTL 20060912) [ 0.000000] ACPI: SSDT 0x00000000B9FD4000 000288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912) [ 0.000000] ACPI: SSDT 0x00000000B9FD3000 000225 (v01 PmRef ApTst 00003000 INTL 20060912) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] cma: Reserved 16 MiB at 0x000000013ec00000 [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013a400000-ffff88013e3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x13fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xb5bcffff] [ 0.000000] node 0: [mem 0xb5be0000-0xb5be8fff] [ 0.000000] node 0: [mem 0xb5beb000-0xb99e1fff] [ 0.000000] node 0: [mem 0xb9be2000-0xb9e92fff] [ 0.000000] node 0: [mem 0xb9e9b000-0xb9ebefff] [ 0.000000] node 0: [mem 0xb9fff000-0xb9ffffff] [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x13fffffff] [ 0.000000] On node 0 totalpages: 1023044 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11827 pages used for memmap [ 0.000000] DMA32 zone: 756902 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xbc000000-0xbfffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000eefff] [ 0.000000] PM: Registered nosave memory: [mem 0x000ef000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb5bd0000-0xb5bdffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb5be9000-0xb5beafff] [ 0.000000] PM: Registered nosave memory: [mem 0xb99e2000-0xb9be1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xb9e93000-0xb9e9afff] [ 0.000000] PM: Registered nosave memory: [mem 0xb9ebf000-0xb9ecefff] [ 0.000000] PM: Registered nosave memory: [mem 0xb9ecf000-0xb9fcefff] [ 0.000000] PM: Registered nosave memory: [mem 0xb9fcf000-0xb9ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xba000000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s72384 r8192 d30016 u524288 [ 0.000000] pcpu-alloc: s72384 r8192 d30016 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1007036 [ 0.000000] Kernel command line: root=/dev/sda7 rootflags=noatime,nodiratime resume=/dev/sdb10 fastboot splash=silent quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3910140K/4092176K available (4989K kernel code, 513K rwdata, 2360K rodata, 800K init, 672K bss, 165652K reserved, 16384K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU kthread priority: 1. [ 0.000000] NR_IRQS:4352 nr_irqs:456 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2261.028 MHz processor [ 0.001012] Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.05 BogoMIPS (lpj=2261028) [ 0.001016] pid_max: default: 32768 minimum: 301 [ 0.001021] ACPI: Core revision 20141107 [ 0.011530] ACPI: All ACPI Tables successfully acquired [ 0.012028] Security Framework initialized [ 0.012042] TOMOYO Linux initialized [ 0.012059] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.012061] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.012351] Initializing cgroup subsys net_cls [ 0.012375] CPU: Physical Processor ID: 0 [ 0.012376] CPU: Processor Core ID: 0 [ 0.012378] mce: CPU supports 6 MCE banks [ 0.012385] CPU0: Thermal monitoring handled by SMI [ 0.012392] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.012460] Freeing SMP alternatives memory: 20K (ffffffff81b4a000 - ffffffff81b4f000) [ 0.012530] dmar: Host address width 36 [ 0.012533] dmar: DRHD base: 0x000000feb03000 flags: 0x0 [ 0.012541] dmar: IOMMU 0: reg_base_addr feb03000 ver 1:0 cap c9008020e30260 ecap 1000 [ 0.012542] dmar: DRHD base: 0x000000feb01000 flags: 0x0 [ 0.012547] dmar: IOMMU 1: reg_base_addr feb01000 ver 1:0 cap c0000020630260 ecap 1000 [ 0.012549] dmar: DRHD base: 0x000000feb02000 flags: 0x1 [ 0.012556] dmar: IOMMU 2: reg_base_addr feb02000 ver 1:0 cap c9008020630260 ecap 1000 [ 0.012558] dmar: RMRR base: 0x00000000000000 end: 0x00000000000000 [ 0.012559] dmar: RMRR base: 0x000000bbc00000 end: 0x000000bfffffff [ 0.013291] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.023300] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz (fam: 06, model: 17, stepping: 06) [ 0.024000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.024000] ... version: 2 [ 0.024000] ... bit width: 40 [ 0.024000] ... generic registers: 2 [ 0.024000] ... value mask: 000000ffffffffff [ 0.024000] ... max period: 000000007fffffff [ 0.024000] ... fixed-purpose events: 3 [ 0.024000] ... event mask: 0000000700000003 [ 0.029074] x86: Booting SMP configuration: [ 0.029076] .... node #0, CPUs: #1 [ 0.027501] CPU1: Thermal monitoring handled by SMI [ 0.041024] x86: Booted up 1 node, 2 CPUs [ 0.041028] smpboot: Total of 2 processors activated (9044.11 BogoMIPS) [ 0.042067] LOCALITY CPU 0 to 1: 2 [ 0.042186] devtmpfs: initialized [ 0.043089] PM: Registering ACPI NVS region [mem 0xb5bd0000-0xb5bdffff] (65536 bytes) [ 0.043092] PM: Registering ACPI NVS region [mem 0xb99e2000-0xb9be1fff] (2097152 bytes) [ 0.043121] PM: Registering ACPI NVS region [mem 0xb9ecf000-0xb9fcefff] (1048576 bytes) [ 0.043144] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 0.043538] pinctrl core: initialized pinctrl subsystem [ 0.043669] NET: Registered protocol family 16 [ 0.048006] cpuidle: using governor ladder [ 0.054003] cpuidle: using governor menu [ 0.054034] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.054036] ACPI: bus type PCI registered [ 0.054116] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.054119] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.054398] PCI: Using configuration type 1 for base access [ 0.060267] ACPI: Added _OSI(Module Device) [ 0.060269] ACPI: Added _OSI(Processor Device) [ 0.060271] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.060272] ACPI: Added _OSI(Processor Aggregator Device) [ 0.068895] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.077816] ACPI: Dynamic OEM Table Load: [ 0.077825] ACPI: SSDT 0xFFFF88013E6AD400 000275 (v01 PmRef Cpu0Ist 00003000 INTL 20060912) [ 0.078369] ACPI: Dynamic OEM Table Load: [ 0.078377] ACPI: SSDT 0xFFFF88013E49F800 00057B (v01 PmRef Cpu0Cst 00003001 INTL 20060912) [ 0.079108] ACPI: Dynamic OEM Table Load: [ 0.079116] ACPI: SSDT 0xFFFF88013E697C00 0001D7 (v01 PmRef ApIst 00003000 INTL 20060912) [ 0.079634] ACPI: Dynamic OEM Table Load: [ 0.079641] ACPI: SSDT 0xFFFF88013E6B4A80 00008D (v01 PmRef ApCst 00003000 INTL 20060912) [ 0.327694] ACPI: Interpreter enabled [ 0.327702] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580) [ 0.327707] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580) [ 0.327722] ACPI: (supports S0 S3 S4 S5) [ 0.327724] ACPI: Using IOAPIC for interrupt routing [ 0.327749] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.328609] ACPI: Power Resource [APPR] (off) [ 0.333803] ACPI: Power Resource [COMP] (on) [ 0.334087] ACPI: Power Resource [LPP] (off) [ 0.335233] ACPI: Power Resource [PFN0] (off) [ 0.335288] ACPI: Power Resource [PFN1] (off) [ 0.335340] ACPI: Power Resource [PFN2] (off) [ 0.335394] ACPI: Power Resource [PFN3] (off) [ 0.335446] ACPI: Power Resource [PFN4] (off) [ 0.336454] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.336461] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.338048] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.338669] PCI host bridge to bus 0000:00 [ 0.338673] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.338675] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.338677] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.338680] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.338682] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff] [ 0.338684] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff] [ 0.338686] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff] [ 0.338697] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 [ 0.338726] DMAR: Forcing write-buffer flush capability [ 0.338727] DMAR: Disabling IOMMU for graphics on this chipset [ 0.338816] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000 [ 0.338830] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit] [ 0.338837] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.338843] pci 0000:00:02.0: reg 0x20: [io 0x60f0-0x60f7] [ 0.338944] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000 [ 0.338955] pci 0000:00:02.1: reg 0x10: [mem 0xd0400000-0xd04fffff 64bit] [ 0.339106] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.339163] pci 0000:00:1a.0: reg 0x20: [io 0x60c0-0x60df] [ 0.339308] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.339361] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.339417] pci 0000:00:1a.1: reg 0x20: [io 0x60a0-0x60bf] [ 0.339561] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.339612] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.339669] pci 0000:00:1a.2: reg 0x20: [io 0x6080-0x609f] [ 0.339812] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.339874] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.339900] pci 0000:00:1a.7: reg 0x10: [mem 0xd8806000-0xd88063ff] [ 0.340023] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.340073] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.340134] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.340157] pci 0000:00:1b.0: reg 0x10: [mem 0xd8800000-0xd8803fff 64bit] [ 0.340275] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.340328] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.340380] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.340508] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.340611] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 [ 0.340737] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.340792] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.340844] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400 [ 0.340972] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.341032] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.341082] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400 [ 0.341209] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.341264] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.341318] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.341375] pci 0000:00:1d.0: reg 0x20: [io 0x6060-0x607f] [ 0.341515] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.341567] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.341622] pci 0000:00:1d.1: reg 0x20: [io 0x6040-0x605f] [ 0.341762] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.341813] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.341870] pci 0000:00:1d.2: reg 0x20: [io 0x6020-0x603f] [ 0.342012] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.342076] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.342102] pci 0000:00:1d.7: reg 0x10: [mem 0xd8805000-0xd88053ff] [ 0.342223] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.342272] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.342322] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.342447] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.342503] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100 [ 0.342739] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 [ 0.342768] pci 0000:00:1f.2: reg 0x10: [io 0x60e8-0x60ef] [ 0.342779] pci 0000:00:1f.2: reg 0x14: [io 0x60fc-0x60ff] [ 0.342791] pci 0000:00:1f.2: reg 0x18: [io 0x60e0-0x60e7] [ 0.342802] pci 0000:00:1f.2: reg 0x1c: [io 0x60f8-0x60fb] [ 0.342813] pci 0000:00:1f.2: reg 0x20: [io 0x6000-0x601f] [ 0.342825] pci 0000:00:1f.2: reg 0x24: [mem 0xd8804000-0xd88047ff] [ 0.342905] pci 0000:00:1f.2: PME# supported from D3hot [ 0.343070] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.343078] pci 0000:00:1c.0: bridge window [mem 0xd8700000-0xd87fffff] [ 0.343172] pci 0000:00:1c.2: PCI bridge to [bus 02-42] [ 0.343177] pci 0000:00:1c.2: bridge window [io 0x4000-0x5fff] [ 0.343182] pci 0000:00:1c.2: bridge window [mem 0xd4700000-0xd86fffff] [ 0.343273] pci 0000:00:1c.4: PCI bridge to [bus 43-83] [ 0.343278] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff] [ 0.343283] pci 0000:00:1c.4: bridge window [mem 0xd0700000-0xd46fffff] [ 0.343475] pci 0000:84:00.0: [14e4:1693] type 00 class 0x020000 [ 0.343553] pci 0000:84:00.0: reg 0x10: [mem 0xd0600000-0xd060ffff 64bit] [ 0.344051] pci 0000:84:00.0: PME# supported from D3hot D3cold [ 0.344132] pci 0000:84:00.0: System wakeup disabled by ACPI [ 0.344291] pci 0000:00:1c.5: PCI bridge to [bus 84] [ 0.344299] pci 0000:00:1c.5: bridge window [mem 0xd0600000-0xd06fffff] [ 0.344404] pci 0000:00:1e.0: PCI bridge to [bus 85] (subtractive decode) [ 0.344412] pci 0000:00:1e.0: bridge window [mem 0xd0500000-0xd05fffff] [ 0.344420] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.344422] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.344425] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.344427] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 0.344429] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfedfffff] (subtractive decode) [ 0.344432] pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode) [ 0.344509] pci_bus 0000:00: on NUMA node 0 [ 0.344511] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.344819] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.344874] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.344927] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.344980] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.345040] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.345092] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.345145] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.345196] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.346350] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.346404] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.346493] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.346495] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.346501] vgaarb: loaded [ 0.346502] vgaarb: bridge control possible 0000:00:02.0 [ 0.346580] SCSI subsystem initialized [ 0.346463] libata version 3.00 loaded. [ 0.346463] ACPI: bus type USB registered [ 0.346463] usbcore: registered new interface driver usbfs [ 0.346474] usbcore: registered new interface driver hub [ 0.346679] usbcore: registered new device driver usb [ 0.346679] PCI: Using ACPI for IRQ routing [ 0.356468] PCI: pci_cache_line_size set to 64 bytes [ 0.356532] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.356534] e820: reserve RAM buffer [mem 0xb5bd0000-0xb7ffffff] [ 0.356536] e820: reserve RAM buffer [mem 0xb5be9000-0xb7ffffff] [ 0.356537] e820: reserve RAM buffer [mem 0xb99e2000-0xbbffffff] [ 0.356539] e820: reserve RAM buffer [mem 0xb9e93000-0xbbffffff] [ 0.356541] e820: reserve RAM buffer [mem 0xb9ebf000-0xbbffffff] [ 0.356543] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff] [ 0.356679] NET: Registered protocol family 8 [ 0.356681] NET: Registered protocol family 20 [ 0.356693] NetLabel: Initializing [ 0.356695] NetLabel: domain hash size = 128 [ 0.356696] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.356711] NetLabel: unlabeled traffic allowed by default [ 0.356740] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.356745] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.356750] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.359010] Switched to clocksource hpet [ 0.359010] pnp: PnP ACPI init [ 0.359286] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.359289] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.359292] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.359294] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.359297] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.359299] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.359302] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.359304] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.359308] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.359671] system 00:01: [io 0xfe00-0xfe0f] has been reserved [ 0.359674] system 00:01: [io 0xfe80-0xfe8f] has been reserved [ 0.359677] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.359680] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.359802] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.359806] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.359861] system 00:03: [io 0x0200-0x027f] has been reserved [ 0.359864] system 00:03: [io 0x1000-0x1003] has been reserved [ 0.359866] system 00:03: [io 0x1010-0x101f] has been reserved [ 0.359869] system 00:03: [io 0xffff] has been reserved [ 0.359872] system 00:03: [io 0x0400-0x047f] could not be reserved [ 0.359874] system 00:03: [io 0x0500-0x057f] has been reserved [ 0.359876] system 00:03: [io 0xef80-0xef9f] has been reserved [ 0.359880] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.359914] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.360319] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.360390] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.360421] pnp 00:07: Plug and Play ACPI device, IDs SYN0141 SYN0100 SYN0002 PNP0f13 (active) [ 0.360565] pnp: PnP ACPI: found 8 devices [ 0.366811] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.366816] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 [ 0.366829] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-42] add_size 200000 [ 0.366840] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 43-83] add_size 200000 [ 0.366851] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 84] add_size 1000 [ 0.366854] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 84] add_size 200000 [ 0.366869] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.366872] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.366874] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.366877] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.366879] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.366882] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.366891] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd8900000-0xd8afffff 64bit pref] [ 0.366898] pci 0000:00:1c.2: BAR 15: assigned [mem 0xd8b00000-0xd8cfffff 64bit pref] [ 0.366905] pci 0000:00:1c.4: BAR 15: assigned [mem 0xd8d00000-0xd8efffff 64bit pref] [ 0.366912] pci 0000:00:1c.5: BAR 15: assigned [mem 0xd8f00000-0xd90fffff 64bit pref] [ 0.366915] pci 0000:00:1c.0: BAR 13: assigned [io 0x7000-0x7fff] [ 0.366918] pci 0000:00:1c.5: BAR 13: assigned [io 0x8000-0x8fff] [ 0.366921] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.366925] pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff] [ 0.366931] pci 0000:00:1c.0: bridge window [mem 0xd8700000-0xd87fffff] [ 0.366936] pci 0000:00:1c.0: bridge window [mem 0xd8900000-0xd8afffff 64bit pref] [ 0.366943] pci 0000:00:1c.2: PCI bridge to [bus 02-42] [ 0.366947] pci 0000:00:1c.2: bridge window [io 0x4000-0x5fff] [ 0.366953] pci 0000:00:1c.2: bridge window [mem 0xd4700000-0xd86fffff] [ 0.366957] pci 0000:00:1c.2: bridge window [mem 0xd8b00000-0xd8cfffff 64bit pref] [ 0.366965] pci 0000:00:1c.4: PCI bridge to [bus 43-83] [ 0.366968] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff] [ 0.366974] pci 0000:00:1c.4: bridge window [mem 0xd0700000-0xd46fffff] [ 0.366979] pci 0000:00:1c.4: bridge window [mem 0xd8d00000-0xd8efffff 64bit pref] [ 0.366986] pci 0000:00:1c.5: PCI bridge to [bus 84] [ 0.366990] pci 0000:00:1c.5: bridge window [io 0x8000-0x8fff] [ 0.366996] pci 0000:00:1c.5: bridge window [mem 0xd0600000-0xd06fffff] [ 0.367001] pci 0000:00:1c.5: bridge window [mem 0xd8f00000-0xd90fffff 64bit pref] [ 0.367015] pci 0000:00:1e.0: PCI bridge to [bus 85] [ 0.367021] pci 0000:00:1e.0: bridge window [mem 0xd0500000-0xd05fffff] [ 0.367032] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.367034] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.367036] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.367038] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff] [ 0.367041] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff] [ 0.367043] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff] [ 0.367045] pci_bus 0000:01: resource 0 [io 0x7000-0x7fff] [ 0.367047] pci_bus 0000:01: resource 1 [mem 0xd8700000-0xd87fffff] [ 0.367050] pci_bus 0000:01: resource 2 [mem 0xd8900000-0xd8afffff 64bit pref] [ 0.367052] pci_bus 0000:02: resource 0 [io 0x4000-0x5fff] [ 0.367054] pci_bus 0000:02: resource 1 [mem 0xd4700000-0xd86fffff] [ 0.367056] pci_bus 0000:02: resource 2 [mem 0xd8b00000-0xd8cfffff 64bit pref] [ 0.367058] pci_bus 0000:43: resource 0 [io 0x2000-0x3fff] [ 0.367060] pci_bus 0000:43: resource 1 [mem 0xd0700000-0xd46fffff] [ 0.367063] pci_bus 0000:43: resource 2 [mem 0xd8d00000-0xd8efffff 64bit pref] [ 0.367065] pci_bus 0000:84: resource 0 [io 0x8000-0x8fff] [ 0.367067] pci_bus 0000:84: resource 1 [mem 0xd0600000-0xd06fffff] [ 0.367069] pci_bus 0000:84: resource 2 [mem 0xd8f00000-0xd90fffff 64bit pref] [ 0.367071] pci_bus 0000:85: resource 1 [mem 0xd0500000-0xd05fffff] [ 0.367074] pci_bus 0000:85: resource 4 [io 0x0000-0x0cf7] [ 0.367076] pci_bus 0000:85: resource 5 [io 0x0d00-0xffff] [ 0.367078] pci_bus 0000:85: resource 6 [mem 0x000a0000-0x000bffff] [ 0.367080] pci_bus 0000:85: resource 7 [mem 0xc0000000-0xdfffffff] [ 0.367082] pci_bus 0000:85: resource 8 [mem 0xf0000000-0xfedfffff] [ 0.367084] pci_bus 0000:85: resource 9 [mem 0xfee01000-0xffffffff] [ 0.367107] NET: Registered protocol family 2 [ 0.367273] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.367371] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.367554] TCP: Hash tables configured (established 32768 bind 32768) [ 0.367596] TCP: reno registered [ 0.367599] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.367623] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.367690] NET: Registered protocol family 1 [ 0.367709] pci 0000:00:02.0: Video device with shadowed ROM [ 0.369285] PCI: CLS 64 bytes, default 64 [ 0.369337] Unpacking initramfs... [ 0.648257] Freeing initrd memory: 15020K (ffff880037145000 - ffff880037ff0000) [ 0.648306] DMAR: No ATSR found [ 0.648717] IOMMU: dmar0 using Register based invalidation [ 0.648719] IOMMU: dmar2 using Register based invalidation [ 0.648722] IOMMU: Setting RMRR: [ 0.648737] IOMMU: Setting identity map for device 0000:00:1a.0 [0x0 - 0x0] [ 0.648764] IOMMU: Setting identity map for device 0000:00:1a.1 [0x0 - 0x0] [ 0.648786] IOMMU: Setting identity map for device 0000:00:1a.2 [0x0 - 0x0] [ 0.648805] IOMMU: Setting identity map for device 0000:00:1a.7 [0x0 - 0x0] [ 0.648823] IOMMU: Setting identity map for device 0000:00:1d.0 [0x0 - 0x0] [ 0.648841] IOMMU: Setting identity map for device 0000:00:1d.1 [0x0 - 0x0] [ 0.648862] IOMMU: Setting identity map for device 0000:00:1d.2 [0x0 - 0x0] [ 0.648880] IOMMU: Setting identity map for device 0000:00:1d.7 [0x0 - 0x0] [ 0.648893] IOMMU: Prepare 0-16MiB unity mapping for LPC [ 0.648902] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] [ 0.649071] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O [ 0.651932] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60f [ 0.651939] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60f [ 0.651999] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.652345] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.652580] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.654063] VFS: Disk quotas dquot_6.5.2 [ 0.654100] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.654652] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.654657] io scheduler noop registered [ 0.654660] io scheduler deadline registered [ 0.654706] io scheduler cfq registered [ 0.654733] io scheduler bfq registered (default) [ 0.654735] BFQ I/O-scheduler version: v7r7 [ 0.655807] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.655813] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.655835] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 0.655840] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 0.655862] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 0.655867] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 0.655890] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 0.655892] pci 0000:84:00.0: Signaling PME through PCIe PME interrupt [ 0.655897] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 0.655918] intel_idle: does not run on family 6 model 23 [ 0.671487] Monitor-Mwait will be used to enter C-1 state [ 0.671493] Monitor-Mwait will be used to enter C-2 state [ 0.671497] tsc: Marking TSC unstable due to TSC halts in idle [ 0.671503] ACPI: acpi_idle registered with cpuidle [ 0.680804] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.680807] ACPI: Thermal Zone [DTSZ] (56 C) [ 0.708379] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.708382] ACPI: Thermal Zone [CPUZ] (62 C) [ 0.711611] thermal LNXTHERM:02: registered as thermal_zone2 [ 0.711613] ACPI: Thermal Zone [SKNZ] (52 C) [ 0.726846] thermal LNXTHERM:03: registered as thermal_zone3 [ 0.726849] ACPI: Thermal Zone [BATZ] (25 C) [ 0.732612] thermal LNXTHERM:04: registered as thermal_zone4 [ 0.732615] ACPI: Thermal Zone [FDTZ] (25 C) [ 0.743184] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled [ 0.763840] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.765500] Non-volatile memory driver v1.3 [ 0.765504] Linux agpgart interface v0.103 [ 0.765560] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 0.765580] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.766499] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 0.766619] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 0.766775] ahci 0000:00:1f.2: version 3.0 [ 0.766984] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.767045] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode [ 0.767049] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs [ 0.771792] scsi host0: ahci [ 0.771903] scsi host1: ahci [ 0.771990] scsi host2: ahci [ 0.772077] scsi host3: ahci [ 0.772158] scsi host4: ahci [ 0.772247] scsi host5: ahci [ 0.772300] ata1: SATA max UDMA/133 abar m2048@0xd8804000 port 0xd8804100 irq 30 [ 0.772303] ata2: SATA max UDMA/133 abar m2048@0xd8804000 port 0xd8804180 irq 30 [ 0.772304] ata3: DUMMY [ 0.772305] ata4: DUMMY [ 0.772307] ata5: DUMMY [ 0.772309] ata6: SATA max UDMA/133 abar m2048@0xd8804000 port 0xd8804380 irq 30 [ 0.772334] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.772343] ehci-pci: EHCI PCI platform driver [ 0.772486] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.772494] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.772510] ehci-pci 0000:00:1a.7: debug port 1 [ 0.776458] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 0.776474] ehci-pci 0000:00:1a.7: irq 19, io mem 0xd8806000 [ 0.782035] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.782079] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.782082] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.782084] usb usb1: Product: EHCI Host Controller [ 0.782086] usb usb1: Manufacturer: Linux 3.19.1-GCnew4AwithTOI ehci_hcd [ 0.782088] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.782224] hub 1-0:1.0: USB hub found [ 0.782232] hub 1-0:1.0: 6 ports detected [ 0.782687] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.782695] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.782709] ehci-pci 0000:00:1d.7: debug port 1 [ 0.786650] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.786663] ehci-pci 0000:00:1d.7: irq 20, io mem 0xd8805000 [ 0.793010] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.793063] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.793066] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.793068] usb usb2: Product: EHCI Host Controller [ 0.793070] usb usb2: Manufacturer: Linux 3.19.1-GCnew4AwithTOI ehci_hcd [ 0.793072] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.793186] hub 2-0:1.0: USB hub found [ 0.793193] hub 2-0:1.0: 6 ports detected [ 0.793450] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.793456] ohci-pci: OHCI PCI platform driver [ 0.793470] ohci-platform: OHCI generic platform driver [ 0.793490] uhci_hcd: USB Universal Host Controller Interface driver [ 0.793604] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.793611] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.793617] uhci_hcd 0000:00:1a.0: detected 2 ports [ 0.793647] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060c0 [ 0.793716] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.793719] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.793721] usb usb3: Product: UHCI Host Controller [ 0.793724] usb usb3: Manufacturer: Linux 3.19.1-GCnew4AwithTOI uhci_hcd [ 0.793726] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.793835] hub 3-0:1.0: USB hub found [ 0.793842] hub 3-0:1.0: 2 ports detected [ 0.794130] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.794136] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.794142] uhci_hcd 0000:00:1a.1: detected 2 ports [ 0.794172] uhci_hcd 0000:00:1a.1: irq 17, io base 0x000060a0 [ 0.794265] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.794268] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.794270] usb usb4: Product: UHCI Host Controller [ 0.794272] usb usb4: Manufacturer: Linux 3.19.1-GCnew4AwithTOI uhci_hcd [ 0.794274] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.794383] hub 4-0:1.0: USB hub found [ 0.794390] hub 4-0:1.0: 2 ports detected [ 0.794624] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.794630] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.794637] uhci_hcd 0000:00:1a.2: detected 2 ports [ 0.794665] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00006080 [ 0.794756] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.794758] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.794761] usb usb5: Product: UHCI Host Controller [ 0.794763] usb usb5: Manufacturer: Linux 3.19.1-GCnew4AwithTOI uhci_hcd [ 0.794765] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.794875] hub 5-0:1.0: USB hub found [ 0.794883] hub 5-0:1.0: 2 ports detected [ 0.795129] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.795135] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.795142] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.795161] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006060 [ 0.795253] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.795255] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.795258] usb usb6: Product: UHCI Host Controller [ 0.795260] usb usb6: Manufacturer: Linux 3.19.1-GCnew4AwithTOI uhci_hcd [ 0.795262] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.795370] hub 6-0:1.0: USB hub found [ 0.795377] hub 6-0:1.0: 2 ports detected [ 0.795590] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.795599] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.795605] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.795634] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00006040 [ 0.795724] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.795726] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.795728] usb usb7: Product: UHCI Host Controller [ 0.795731] usb usb7: Manufacturer: Linux 3.19.1-GCnew4AwithTOI uhci_hcd [ 0.795733] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.795843] hub 7-0:1.0: USB hub found [ 0.795850] hub 7-0:1.0: 2 ports detected [ 0.796105] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.796112] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.796119] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.796139] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006020 [ 0.796213] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.796216] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.796218] usb usb8: Product: UHCI Host Controller [ 0.796221] usb usb8: Manufacturer: Linux 3.19.1-GCnew4AwithTOI uhci_hcd [ 0.796223] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.796334] hub 8-0:1.0: USB hub found [ 0.796341] hub 8-0:1.0: 2 ports detected [ 0.796498] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.798090] i8042: Detected active multiplexing controller, rev 1.1 [ 0.798903] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.798932] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.798935] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.798938] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.798940] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.799032] mousedev: PS/2 mouse device common for all mice [ 0.799116] rtc_cmos 00:04: RTC can wake from S4 [ 0.799257] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.799288] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.799311] hidraw: raw HID events driver (C) Jiri Kosina [ 0.799387] Key type dns_resolver registered [ 0.799529] TuxOnIce 3.3 (http://tuxonice.net) [ 0.799704] registered taskstats version 1 [ 0.800172] rtc_cmos 00:04: setting system clock to 2015-03-14 22:59:22 UTC (1426373962) [ 1.078033] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.082957] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.086459] ata1.00: ATA-8: SAMSUNG HM500LI, 2TF00_00, max UDMA7 [ 1.086462] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.091462] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.094968] ata1.00: configured for UDMA/133 [ 1.095063] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM500LI 0_00 PQ: 0 ANSI: 5 [ 1.095269] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.095312] sd 0:0:0:0: [sda] Write Protect is off [ 1.095315] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.095331] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.280874] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 > [ 1.281399] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.401031] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.406820] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.406970] ata2.00: ATA-8: SAMSUNG HM500JJ, 2AK10001, max UDMA/133 [ 1.406974] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.412815] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.412948] ata2.00: configured for UDMA/133 [ 1.413018] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HM500JJ 0001 PQ: 0 ANSI: 5 [ 1.413202] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.413279] sd 1:0:0:0: [sdb] Write Protect is off [ 1.413283] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.413310] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.533070] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 > [ 1.533576] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.608290] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000/0x20000, board id: 3655, fw id: 470319 [ 1.648785] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1 [ 1.677271] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.718043] ata6: SATA link down (SStatus 0 SControl 300) [ 1.739883] TuxOnIce: No image found. [ 1.740692] Freeing unused kernel memory: 800K (ffffffff81a82000 - ffffffff81b4a000) [ 1.740694] Write protecting the kernel read-only data: 10240k [ 1.741286] Freeing unused kernel memory: 1144K (ffff8800014e2000 - ffff880001600000) [ 1.741978] Freeing unused kernel memory: 1736K (ffff88000184e000 - ffff880001a00000) [ 1.741980] BFS CPU scheduler v0.461 by Con Kolivas. [ 1.769702] systemd-udevd[100]: starting version 208 [ 1.786373] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input9 [ 1.786381] ACPI: Sleep Button [SLPB] [ 1.786447] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input10 [ 1.786522] ACPI: Lid Switch [LID] [ 1.786580] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11 [ 1.786583] ACPI: Power Button [PWRF] [ 1.809354] [drm] Initialized drm 1.1.0 20060810 [ 1.818398] [drm] Memory usable by graphics device = 2048M [ 1.818402] [drm] Replacing VGA console driver [ 1.820237] Console: switching to colour dummy device 80x25 [ 1.830094] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.830097] [drm] Driver supports precise vblank timestamp query. [ 1.830162] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.856079] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x5) (20141107/exoparg2-420) [ 1.856089] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DOD] (Node ffff88013e4352f8), AE_AML_PACKAGE_LIMIT (20141107/psparse-536) [ 1.856098] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20141107/video-1230) [ 1.856194] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.861748] acpi device:03: registered as cooling_device7 [ 1.861902] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12 [ 1.861951] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0 [ 1.864700] random: nonblocking pool is initialized [ 2.042418] fbcon: inteldrmfb (fb0) is primary device [ 2.592752] Console: switching to colour frame buffer device 210x65 [ 2.597654] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.597656] i915 0000:00:02.0: registered panic notifier [ 3.386918] xor: automatically using best checksumming function: [ 3.396037] prefetch64-sse: 10124.000 MB/sec [ 3.413033] raid6: sse2x1 3894 MB/s [ 3.430014] raid6: sse2x2 5148 MB/s [ 3.447017] raid6: sse2x4 6820 MB/s [ 3.447026] raid6: using algorithm sse2x4 (6820 MB/s) [ 3.447027] raid6: using ssse3x2 recovery algorithm [ 3.450450] Btrfs loaded [ 5.328147] video LNXVIDEO:00: Restoring backlight state [ 5.336284] PM: Starting manual resume from disk [ 5.589077] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: user_xattr [ 5.972875] EXT4-fs (sda7): re-mounted. Opts: user_xattr [ 6.227164] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 7.260696] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time. [ 7.319186] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 7.389408] systemd[1]: Inserted module 'autofs4' [ 7.466492] NET: Registered protocol family 10 [ 7.466737] systemd[1]: Inserted module 'ipv6' [ 7.480065] systemd[1]: Set hostname to . [ 7.976995] device-mapper: uevent: version 1.0.3 [ 7.977082] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com [ 7.989465] LVM: Logical Volume autoactivation enabled. [ 7.989485] LVM: Activation generator successfully completed. [ 9.145294] systemd[1]: Starting Collect Read-Ahead Data... [ 9.145878] systemd[1]: Starting Replay Read-Ahead Data... [ 9.146341] systemd[1]: Starting Syslog Socket. [ 9.146424] systemd[1]: Listening on Syslog Socket. [ 9.146447] systemd[1]: Starting Remote File Systems (Pre). [ 9.146484] systemd[1]: Reached target Remote File Systems (Pre). [ 9.146499] systemd[1]: Starting Remote File Systems. [ 9.146536] systemd[1]: Reached target Remote File Systems. [ 9.146560] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 9.146627] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 9.146645] systemd[1]: Starting Delayed Shutdown Socket. [ 9.146722] systemd[1]: Listening on Delayed Shutdown Socket. [ 9.146739] systemd[1]: Starting LVM2 metadata daemon socket. [ 9.146806] systemd[1]: Listening on LVM2 metadata daemon socket. [ 9.146833] systemd[1]: Starting Journal Socket. [ 9.146915] systemd[1]: Listening on Journal Socket. [ 9.146936] systemd[1]: Starting LSB: Set default boot entry if called... [ 9.147364] systemd[1]: Mounting Debug File System... [ 9.147881] systemd[1]: Starting Create dynamic rule for /dev/root link... [ 9.148396] systemd[1]: Starting Journal Service... [ 9.148910] systemd[1]: Started Journal Service. [ 9.186049] systemd-readahead[238]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day. [ 9.540364] systemd-journald[242]: Vacuuming done, freed 0 bytes [ 10.757849] loop: module loaded [ 10.758579] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 10.758617] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 11.045262] EXT4-fs (sda7): re-mounted. Opts: user_xattr [ 11.352127] systemd-udevd[279]: starting version 208 [ 12.881774] ACPI: AC Adapter [AC] (on-line) [ 12.888716] hp_accel: hardware type NC6730b found [ 12.889512] lis3lv02d: 8 bits sensor found [ 12.925085] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input13 [ 12.957625] pps_core: LinuxPPS API ver. 1 registered [ 12.957628] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 12.957850] PTP clock support registered [ 12.959234] tg3.c:v3.137 (May 11, 2014) [ 12.972456] tg3 0000:84:00.0 eth0: Tigon3 [partno(BCM95751) rev b002] (PCI Express) MAC address 00:22:64:75:de:bf [ 12.972462] tg3 0000:84:00.0 eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 12.972464] tg3 0000:84:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 12.972467] tg3 0000:84:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 12.974698] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20141107/utaddress-258) [ 12.974706] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.974710] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000053b (\GPIO) (20141107/utaddress-258) [ 12.974714] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.974716] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000053b (\GPIO) (20141107/utaddress-258) [ 12.974719] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.974721] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 12.975299] ACPI: Battery Slot [BAT0] (battery present) [ 12.975384] ACPI: Battery Slot [BAT1] (battery absent) [ 12.975742] wmi: Mapper loaded [ 13.385372] sound hdaudioC0D0: autoconfig: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line [ 13.385379] sound hdaudioC0D0: speaker_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 13.385382] sound hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0) [ 13.385385] sound hdaudioC0D0: mono: mono_out=0x0 [ 13.385388] sound hdaudioC0D0: inputs: [ 13.385391] sound hdaudioC0D0: Internal Mic=0x15 [ 13.385395] sound hdaudioC0D0: Front Mic=0x14 [ 13.385398] sound hdaudioC0D0: Line=0x1c [ 13.405956] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input14 [ 13.406438] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 13.406536] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 13.406627] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 13.406722] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 13.994747] Adding 10485756k swap on /dev/sdb10. Priority:-1 extents:1 across:10485756k [ 14.277899] iTCO_vendor_support: vendor-support=0 [ 14.278146] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 14.278208] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460) [ 14.278341] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 14.292656] input: HP WMI hotkeys as /devices/virtual/input/input19 [ 14.424577] fuse init (API version 7.23) [ 16.276231] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 16.291901] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended [ 16.293107] EXT4-fs (sda1): mounted filesystem without journal. Opts: user_xattr [ 19.029853] EXT4-fs (sda13): mounted filesystem with ordered data mode. Opts: user_xattr [ 19.047529] systemd-journald[242]: Received request to flush runtime journal from PID 1 [ 22.786198] vboxdrv: Found 2 processor cores. [ 22.786743] vboxdrv: fAsync=0 offMin=0x297 offMax=0x1265 [ 22.787064] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 22.787068] vboxdrv: Successfully loaded version 4.3.20 (interface 0x001a0008). [ 23.060222] vboxpci: IOMMU found [ 23.308786] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 23.322889] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 23.325805] ip_tables: (C) 2000-2006 Netfilter Core Team [ 30.427590] tg3 0000:84:00.0 eth0: Link is up at 100 Mbps, full duplex [ 30.427601] tg3 0000:84:00.0 eth0: Flow control is off for TX and off for RX [ 207.526385] TuxOnIce 3.3, with support for checksumming, usm, compression, block i/o, swap storage, file storage, userui. [ 207.526545] Initiating a hibernation cycle. [ 207.555351] Console is 65x210. [ 207.565528] Starting other threads.Freezing user space processes ... (elapsed 0.004 seconds) done. [ 207.570122] Freezing remaining freezable tasks ... [ 207.571084] (elapsed 0.000 seconds) [ 207.571085] done. [ 207.971634] Restarting kernel threads ... done. [ 208.100733] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 210.052178] ...20%...40%...60%...80% [ 213.216025] Waited for i/o due to synchronous I/O 6 times. [ 213.216029] Waited for i/o due to throughput_throttle 413 times. [ 213.216927] Suspending console(s) (use no_console_suspend to debug) [ 213.218235] serial 00:05: disabled [ 213.392074] PM: freeze of devices complete after 175.142 msecs [ 213.404035] PM: late freeze of devices complete after 11.958 msecs [ 213.405070] PM: noirq freeze of devices complete after 1.031 msecs [ 213.405441] ACPI: Preparing to enter system sleep state S4 [ 213.411087] PM: Saving platform NVS memory [ 213.420250] Disabling non-boot CPUs ... [ 213.421004] Removed affinity for 315 processes to cpu 1 [ 213.421004] kvm: disabling virtualization on CPU1 [ 213.421595] smpboot: CPU 1 is now offline [ 213.422015] PM: Restoring platform NVS memory [ 213.422015] Enabling non-boot CPUs ... [ 213.422015] x86: Booting SMP configuration: [ 213.422015] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 213.422015] kvm: enabling virtualization on CPU1 [ 213.433430] Added affinity for 255 processes to cpu 1 [ 213.433431] Released forced binding to cpu0 for 255 processes [ 213.433793] CPU1 is up [ 213.436256] ACPI: Waking up from system sleep state S4 [ 213.479411] acpi LNXPOWER:07: Turning ON [ 213.483071] acpi LNXPOWER:06: Turning ON [ 213.486070] acpi LNXPOWER:05: Turning ON [ 213.489069] acpi LNXPOWER:04: Turning ON [ 213.492069] acpi LNXPOWER:03: Turning ON [ 213.495121] acpi LNXPOWER:01: Turning OFF [ 213.512108] PM: noirq restore of devices complete after 16.972 msecs [ 213.512663] PM: early restore of devices complete after 0.487 msecs [ 213.519042] usb usb3: root hub lost power or was reset [ 213.519075] usb usb4: root hub lost power or was reset [ 213.519106] usb usb5: root hub lost power or was reset [ 213.519131] usb usb1: root hub lost power or was reset [ 213.523015] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 213.523154] usb usb6: root hub lost power or was reset [ 213.523187] usb usb7: root hub lost power or was reset [ 213.523219] usb usb8: root hub lost power or was reset [ 213.523241] usb usb2: root hub lost power or was reset [ 213.527130] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 213.548364] sd 0:0:0:0: [sda] Starting disk [ 213.548368] sd 1:0:0:0: [sdb] Starting disk [ 213.553798] ------------[ cut here ]------------ [ 213.553839] WARNING: CPU: 0 PID: 55 at drivers/gpu/drm/i915/intel_display.c:10845 check_crtc_state+0xaa0/0xec0 [i915]() [ 213.553840] crtc's computed active state doesn't match tracked active state (expected 0, found 1) [ 213.553865] Modules linked in: nf_log_ipv6 xt_pkttype nf_log_ipv4 nf_log_common xt_LOG xt_limit ip6t_REJECT nf_reject_ipv6 xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw ipt_REJECT nf_reject_ipv4 iptable_raw xt_CT iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack ip6table_filter ip6_tables x_tables pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) fuse hp_wmi sparse_keymap rfkill iTCO_wdt iTCO_vendor_support snd_hda_codec_hdmi snd_hda_codec_analog snd_hda_codec_generic coretemp kvm_intel kvm joydev serio_raw snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device lpc_ich mfd_core tg3 libphy ptp pps_core snd soundcore wmi battery tpm_infineon [ 213.553873] tpm_tis tpm evdev hp_accel lis3lv02d input_polldev ac acpi_cpufreq sg loop dm_mod ipv6 autofs4 btrfs raid6_pq xor i915 drm_kms_helper drm i2c_algo_bit video button [ 213.553876] CPU: 0 PID: 55 Comm: kworker/u8:5 Tainted: G O 3.19.1-GCnew4AwithTOI #17 [ 213.553877] Hardware name: Hewlett-Packard HP Compaq 6730b (KU489ET#ABD)/30DD, BIOS 68PDD Ver. F.20 12/07/2011 [ 213.553882] Workqueue: events_unbound async_run_entry_fn [ 213.553884] ffffffffa016ee80 ffff8800b540f798 ffffffff814d393f ffffffff81a2e1b8 [ 213.553886] ffff8800b540f7e8 ffff8800b540f7d8 ffffffff81044250 ffff8800b540f838 [ 213.553888] 0000000000000001 ffff8800b54a3000 ffff880139060000 ffff8800b54a3358 [ 213.553888] Call Trace: [ 213.553895] [] dump_stack+0x4c/0x6e [ 213.553897] [] warn_slowpath_common+0x80/0xc0 [ 213.553898] [] warn_slowpath_fmt+0x41/0x50 [ 213.553918] [] ? intel_lvds_get_config+0x41/0xe0 [i915] [ 213.553934] [] check_crtc_state+0xaa0/0xec0 [i915] [ 213.553953] [] intel_modeset_check_state+0x2ac/0x980 [i915] [ 213.553969] [] intel_set_mode+0x76/0x90 [i915] [ 213.553986] [] intel_modeset_setup_hw_state+0x7a0/0xcb0 [i915] [ 213.554005] [] ? __drm_modeset_lock_all+0xa6/0x110 [drm] [ 213.554033] [] i915_drm_resume+0x123/0x1a0 [i915] [ 213.554044] [] i915_pm_resume+0x1b/0x20 [i915] [ 213.554048] [] pci_pm_restore+0x7c/0xd0 [ 213.554049] [] ? pci_pm_suspend_noirq+0x1a0/0x1a0 [ 213.554052] [] dpm_run_callback+0x26/0x60 [ 213.554053] [] device_resume+0x87/0x1a0 [ 213.554055] [] async_resume+0x1c/0x50 [ 213.554057] [] async_run_entry_fn+0x47/0x160 [ 213.554060] [] process_one_work+0x129/0x300 [ 213.554062] [] ? _raw_spin_unlock_irq+0xf/0x20 [ 213.554064] [] worker_thread+0x119/0x450 [ 213.554066] [] ? cancel_delayed_work_sync+0x10/0x10 [ 213.554068] [] kthread+0xc4/0xe0 [ 213.554070] [] ? set_current_groups+0x20/0x40 [ 213.554072] [] ? kthread_create_on_node+0x180/0x180 [ 213.554073] [] ret_from_fork+0x7c/0xb0 [ 213.554075] [] ? kthread_create_on_node+0x180/0x180 [ 213.554079] ---[ end trace 77c9536f89614079 ]--- [ 213.554100] [drm:check_crtc_state [i915]] *ERROR* mismatch in adjusted_mode.flags(DRM_MODE_FLAG_NHSYNC) (expected 2, found 0) [ 213.554101] ------------[ cut here ]------------ [ 213.554118] WARNING: CPU: 0 PID: 55 at drivers/gpu/drm/i915/intel_display.c:10872 check_crtc_state+0x7fc/0xec0 [i915]() [ 213.554118] pipe state doesn't match! [ 213.554142] Modules linked in: nf_log_ipv6 xt_pkttype nf_log_ipv4 nf_log_common xt_LOG xt_limit ip6t_REJECT nf_reject_ipv6 xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw ipt_REJECT nf_reject_ipv4 iptable_raw xt_CT iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack ip6table_filter ip6_tables x_tables pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) fuse hp_wmi sparse_keymap rfkill iTCO_wdt iTCO_vendor_support snd_hda_codec_hdmi snd_hda_codec_analog snd_hda_codec_generic coretemp kvm_intel kvm joydev serio_raw snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device lpc_ich mfd_core tg3 libphy ptp pps_core snd soundcore wmi battery tpm_infineon [ 213.554151] tpm_tis tpm evdev hp_accel lis3lv02d input_polldev ac acpi_cpufreq sg loop dm_mod ipv6 autofs4 btrfs raid6_pq xor i915 drm_kms_helper drm i2c_algo_bit video button [ 213.554152] CPU: 0 PID: 55 Comm: kworker/u8:5 Tainted: G W O 3.19.1-GCnew4AwithTOI #17 [ 213.554153] Hardware name: Hewlett-Packard HP Compaq 6730b (KU489ET#ABD)/30DD, BIOS 68PDD Ver. F.20 12/07/2011 [ 213.554155] Workqueue: events_unbound async_run_entry_fn [ 213.554157] ffffffffa016ee80 ffff8800b540f798 ffffffff814d393f ffffffff81a2e1b8 [ 213.554159] ffff8800b540f7e8 ffff8800b540f7d8 ffffffff81044250 ffff8800b540f7e0 [ 213.554161] ffff8800b54d4060 ffff8800b54a3000 ffff880139060000 ffff8800b54a3358 [ 213.554162] Call Trace: [ 213.554165] [] dump_stack+0x4c/0x6e [ 213.554166] [] warn_slowpath_common+0x80/0xc0 [ 213.554168] [] warn_slowpath_fmt+0x41/0x50 [ 213.554186] [] check_crtc_state+0x7fc/0xec0 [i915] [ 213.554205] [] intel_modeset_check_state+0x2ac/0x980 [i915] [ 213.554222] [] intel_set_mode+0x76/0x90 [i915] [ 213.554245] [] intel_modeset_setup_hw_state+0x7a0/0xcb0 [i915] [ 213.554257] [] ? __drm_modeset_lock_all+0xa6/0x110 [drm] [ 213.554267] [] i915_drm_resume+0x123/0x1a0 [i915] [ 213.554277] [] i915_pm_resume+0x1b/0x20 [i915] [ 213.554279] [] pci_pm_restore+0x7c/0xd0 [ 213.554281] [] ? pci_pm_suspend_noirq+0x1a0/0x1a0 [ 213.554282] [] dpm_run_callback+0x26/0x60 [ 213.554283] [] device_resume+0x87/0x1a0 [ 213.554285] [] async_resume+0x1c/0x50 [ 213.554287] [] async_run_entry_fn+0x47/0x160 [ 213.554288] [] process_one_work+0x129/0x300 [ 213.554290] [] ? _raw_spin_unlock_irq+0xf/0x20 [ 213.554292] [] worker_thread+0x119/0x450 [ 213.554294] [] ? cancel_delayed_work_sync+0x10/0x10 [ 213.554295] [] kthread+0xc4/0xe0 [ 213.554297] [] ? set_current_groups+0x20/0x40 [ 213.554299] [] ? kthread_create_on_node+0x180/0x180 [ 213.554300] [] ret_from_fork+0x7c/0xb0 [ 213.554302] [] ? kthread_create_on_node+0x180/0x180 [ 213.554303] ---[ end trace 77c9536f8961407a ]--- [ 213.569831] rtc_cmos 00:04: System wakeup disabled by ACPI [ 213.570550] serial 00:05: activated [ 213.834045] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 213.834073] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 213.836043] ata6: SATA link down (SStatus 0 SControl 300) [ 213.839061] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 213.847566] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 213.851070] ata1.00: configured for UDMA/133 [ 213.856030] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 213.861997] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 213.862100] ata2.00: configured for UDMA/133 [ 213.897437] PM: restore of devices complete after 384.770 msecs [ 213.897457] PM: recover of devices complete after 0.007 msecs [ 213.897459] cpufreq: cpufreq_resume: Failed to start governor for policy: ffff8800b7c4b000 [ 213.897459] cpufreq: cpufreq_resume: Failed to start governor for policy: ffff8800b7c4aa00 [ 214.822896] ...20%...40%...60%...80% [ 217.780148] toi_start_one_readahead: toi_bio_rw_page returned -28. [ 217.817681] Waited for i/o due to readahead not ready 2920 times. [ 217.817683] Waited for i/o due to throughput_throttle 4829 times. [ 217.821359] Restarting tasks ... done. [ 217.861308] update_temperature: thermal thermal_zone0: last_temperature N/A, current_temperature=53000 [ 217.861958] update_temperature: thermal thermal_zone1: last_temperature N/A, current_temperature=58000 [ 217.861963] thermal_zone_trip_update: thermal thermal_zone1: Trip1[type=1,temp=107000]:trend=5,throttle=0 [ 217.861969] get_target_state: thermal cooling_device6: cur_state=0 [ 217.861971] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 217.861975] get_target_state: thermal cooling_device5: cur_state=0 [ 217.861977] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 217.861980] thermal_cdev_update: thermal cooling_device6: zone1->target=18446744073709551615 [ 217.861983] thermal_cdev_update: thermal cooling_device6: zone2->target=18446744073709551615 [ 217.861985] thermal_cdev_update: thermal cooling_device6: zone3->target=18446744073709551615 [ 217.861999] thermal_cdev_update: thermal cooling_device6: set to state 0 [ 217.862016] thermal_cdev_update: thermal cooling_device5: zone1->target=18446744073709551615 [ 217.862022] thermal_cdev_update: thermal cooling_device5: zone2->target=18446744073709551615 [ 217.862027] thermal_cdev_update: thermal cooling_device5: zone3->target=18446744073709551615 [ 217.862035] thermal_cdev_update: thermal cooling_device5: set to state 0 [ 217.862039] thermal_zone_trip_update: thermal thermal_zone1: Trip2[type=0,temp=90000]:trend=5,throttle=0 [ 217.862072] get_target_state: thermal cooling_device0: cur_state=1 [ 217.862075] thermal_zone_trip_update: thermal cooling_device0: old_target=-1, target=-1 [ 217.862078] thermal_cdev_update: thermal cooling_device0: zone1->target=18446744073709551615 [ 217.864510] thermal_cdev_update: thermal cooling_device0: set to state 0 [ 217.864514] thermal_zone_trip_update: thermal thermal_zone1: Trip3[type=0,temp=75000]:trend=5,throttle=0 [ 217.864545] get_target_state: thermal cooling_device1: cur_state=1 [ 217.864548] thermal_zone_trip_update: thermal cooling_device1: old_target=-1, target=-1 [ 217.864551] thermal_cdev_update: thermal cooling_device1: zone1->target=18446744073709551615 [ 217.867537] thermal_cdev_update: thermal cooling_device1: set to state 0 [ 217.867541] thermal_zone_trip_update: thermal thermal_zone1: Trip4[type=0,temp=60000]:trend=5,throttle=0 [ 217.867571] get_target_state: thermal cooling_device2: cur_state=1 [ 217.867574] thermal_zone_trip_update: thermal cooling_device2: old_target=-1, target=-1 [ 217.867577] thermal_cdev_update: thermal cooling_device2: zone1->target=18446744073709551615 [ 217.870520] thermal_cdev_update: thermal cooling_device2: set to state 0 [ 217.870524] thermal_zone_trip_update: thermal thermal_zone1: Trip5[type=0,temp=45000]:trend=5,throttle=1 [ 217.870554] get_target_state: thermal cooling_device3: cur_state=1 [ 217.870557] thermal_zone_trip_update: thermal cooling_device3: old_target=-1, target=1 [ 217.870559] thermal_cdev_update: thermal cooling_device3: zone1->target=1 [ 217.870562] thermal_cdev_update: thermal cooling_device3: set to state 1 [ 217.870565] thermal_zone_trip_update: thermal thermal_zone1: Trip6[type=0,temp=30000]:trend=5,throttle=1 [ 217.870593] get_target_state: thermal cooling_device4: cur_state=1 [ 217.870596] thermal_zone_trip_update: thermal cooling_device4: old_target=-1, target=1 [ 217.870598] thermal_cdev_update: thermal cooling_device4: zone1->target=1 [ 217.870601] thermal_cdev_update: thermal cooling_device4: set to state 1 [ 217.871223] update_temperature: thermal thermal_zone2: last_temperature N/A, current_temperature=49000 [ 217.871227] thermal_zone_trip_update: thermal thermal_zone2: Trip1[type=1,temp=95000]:trend=5,throttle=0 [ 217.871230] get_target_state: thermal cooling_device6: cur_state=0 [ 217.871233] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 217.871235] get_target_state: thermal cooling_device5: cur_state=0 [ 217.871238] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 217.871240] thermal_cdev_update: thermal cooling_device6: zone1->target=18446744073709551615 [ 217.871243] thermal_cdev_update: thermal cooling_device6: zone2->target=18446744073709551615 [ 217.871245] thermal_cdev_update: thermal cooling_device6: zone3->target=18446744073709551615 [ 217.871253] thermal_cdev_update: thermal cooling_device6: set to state 0 [ 217.871255] thermal_cdev_update: thermal cooling_device5: zone1->target=18446744073709551615 [ 217.871258] thermal_cdev_update: thermal cooling_device5: zone2->target=18446744073709551615 [ 217.871260] thermal_cdev_update: thermal cooling_device5: zone3->target=18446744073709551615 [ 217.871267] thermal_cdev_update: thermal cooling_device5: set to state 0 [ 217.875813] update_temperature: thermal thermal_zone3: last_temperature N/A, current_temperature=24900 [ 217.875817] thermal_zone_trip_update: thermal thermal_zone3: Trip1[type=1,temp=60000]:trend=5,throttle=0 [ 217.875820] get_target_state: thermal cooling_device6: cur_state=0 [ 217.875823] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 217.875825] get_target_state: thermal cooling_device5: cur_state=0 [ 217.875828] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 217.875830] thermal_cdev_update: thermal cooling_device6: zone1->target=18446744073709551615 [ 217.875833] thermal_cdev_update: thermal cooling_device6: zone2->target=18446744073709551615 [ 217.875836] thermal_cdev_update: thermal cooling_device6: zone3->target=18446744073709551615 [ 217.875844] thermal_cdev_update: thermal cooling_device6: set to state 0 [ 217.875846] thermal_cdev_update: thermal cooling_device5: zone1->target=18446744073709551615 [ 217.875849] thermal_cdev_update: thermal cooling_device5: zone2->target=18446744073709551615 [ 217.875851] thermal_cdev_update: thermal cooling_device5: zone3->target=18446744073709551615 [ 217.875858] thermal_cdev_update: thermal cooling_device5: set to state 0 [ 217.877579] update_temperature: thermal thermal_zone4: last_temperature N/A, current_temperature=52000 [ 217.877583] video LNXVIDEO:00: Restoring backlight state [ 217.921855] TuxOnIce debugging info: - TuxOnIce core : 3.3 - Kernel Version : 3.19.1-GCnew4AwithTOI - Compiler vers. : 4.8 - Attempt number : 1 - Parameters : 0 536576 0 0 -2 5 - Overall expected compression percentage: 0. - Checksum method is 'md4'. 0 pages resaved in atomic copy. - Compressor is 'lzo'. Compressed 1334726656 bytes into 507996481 (61 percent compression). - Block I/O active. Used 125338 pages from swap on /dev/sdb10. - Max outstanding reads 1686. Max writes 8412. Memory_needed: 1024 x (4096 + 344 + 112) = 4661248 bytes. Free mem throttle point reached 0. - Swap Allocator enabled. Swap available for image: 2621439 pages. - File Allocator active. Storage available for image: 0 pages. - I/O speed: Write 209 MB/s, Read 247 MB/s. - Extra pages : 835 used/2000. - Result : Succeeded. [ 221.266444] tg3 0000:84:00.0 eth0: Link is up at 100 Mbps, full duplex [ 221.266449] tg3 0000:84:00.0 eth0: Flow control is off for TX and off for RX [ 293.747571] update_temperature: thermal thermal_zone1: last_temperature=58000, current_temperature=60000 [ 293.747579] thermal_zone_trip_update: thermal thermal_zone1: Trip1[type=1,temp=107000]:trend=2,throttle=0 [ 293.747585] get_target_state: thermal cooling_device6: cur_state=0 [ 293.747587] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 293.747591] get_target_state: thermal cooling_device5: cur_state=0 [ 293.747593] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 293.747598] thermal_zone_trip_update: thermal thermal_zone1: Trip2[type=0,temp=90000]:trend=1,throttle=0 [ 293.749094] get_target_state: thermal cooling_device0: cur_state=0 [ 293.749097] thermal_zone_trip_update: thermal cooling_device0: old_target=-1, target=-1 [ 293.749102] thermal_zone_trip_update: thermal thermal_zone1: Trip3[type=0,temp=75000]:trend=1,throttle=0 [ 293.749788] get_target_state: thermal cooling_device1: cur_state=0 [ 293.749792] thermal_zone_trip_update: thermal cooling_device1: old_target=-1, target=-1 [ 293.749795] thermal_zone_trip_update: thermal thermal_zone1: Trip4[type=0,temp=60000]:trend=1,throttle=1 [ 293.749858] get_target_state: thermal cooling_device2: cur_state=0 [ 293.749861] thermal_zone_trip_update: thermal cooling_device2: old_target=-1, target=1 [ 293.749864] thermal_cdev_update: thermal cooling_device2: zone1->target=1 [ 293.757615] thermal_cdev_update: thermal cooling_device2: set to state 1 [ 293.757620] thermal_zone_trip_update: thermal thermal_zone1: Trip5[type=0,temp=45000]:trend=1,throttle=1 [ 293.757652] get_target_state: thermal cooling_device3: cur_state=1 [ 293.757655] thermal_zone_trip_update: thermal cooling_device3: old_target=1, target=1 [ 293.757659] thermal_zone_trip_update: thermal thermal_zone1: Trip6[type=0,temp=30000]:trend=1,throttle=1 [ 293.757687] get_target_state: thermal cooling_device4: cur_state=1 [ 293.757690] thermal_zone_trip_update: thermal cooling_device4: old_target=1, target=1 [ 293.759753] update_temperature: thermal thermal_zone1: last_temperature=60000, current_temperature=60000 [ 293.759757] thermal_zone_trip_update: thermal thermal_zone1: Trip1[type=1,temp=107000]:trend=2,throttle=0 [ 293.759761] get_target_state: thermal cooling_device6: cur_state=0 [ 293.759763] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 293.759766] get_target_state: thermal cooling_device5: cur_state=0 [ 293.759769] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 293.759772] thermal_zone_trip_update: thermal thermal_zone1: Trip2[type=0,temp=90000]:trend=0,throttle=0 [ 293.760511] get_target_state: thermal cooling_device0: cur_state=0 [ 293.760514] thermal_zone_trip_update: thermal cooling_device0: old_target=-1, target=-1 [ 293.760526] thermal_zone_trip_update: thermal thermal_zone1: Trip3[type=0,temp=75000]:trend=0,throttle=0 [ 293.760581] get_target_state: thermal cooling_device1: cur_state=0 [ 293.760584] thermal_zone_trip_update: thermal cooling_device1: old_target=-1, target=-1 [ 293.760588] thermal_zone_trip_update: thermal thermal_zone1: Trip4[type=0,temp=55000]:trend=1,throttle=1 [ 293.760734] get_target_state: thermal cooling_device2: cur_state=1 [ 293.760737] thermal_zone_trip_update: thermal cooling_device2: old_target=1, target=1 [ 293.760741] thermal_zone_trip_update: thermal thermal_zone1: Trip5[type=0,temp=45000]:trend=1,throttle=1 [ 293.761048] get_target_state: thermal cooling_device3: cur_state=1 [ 293.761051] thermal_zone_trip_update: thermal cooling_device3: old_target=1, target=1 [ 293.761055] thermal_zone_trip_update: thermal thermal_zone1: Trip6[type=0,temp=30000]:trend=1,throttle=1 [ 293.761110] get_target_state: thermal cooling_device4: cur_state=1 [ 293.761113] thermal_zone_trip_update: thermal cooling_device4: old_target=1, target=1 [ 343.839070] PPP generic driver version 2.4.2 [ 343.923501] NET: Registered protocol family 17 [ 344.145277] NET: Registered protocol family 24 [ 344.147608] dsl0: renamed from ppp0 [ 439.203036] update_temperature: thermal thermal_zone1: last_temperature=60000, current_temperature=75000 [ 439.203045] thermal_zone_trip_update: thermal thermal_zone1: Trip1[type=1,temp=107000]:trend=2,throttle=0 [ 439.203051] get_target_state: thermal cooling_device6: cur_state=0 [ 439.203054] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 439.203058] get_target_state: thermal cooling_device5: cur_state=0 [ 439.203060] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 439.203064] thermal_zone_trip_update: thermal thermal_zone1: Trip2[type=0,temp=90000]:trend=1,throttle=0 [ 439.203099] get_target_state: thermal cooling_device0: cur_state=0 [ 439.203102] thermal_zone_trip_update: thermal cooling_device0: old_target=-1, target=-1 [ 439.203105] thermal_zone_trip_update: thermal thermal_zone1: Trip3[type=0,temp=75000]:trend=1,throttle=1 [ 439.203774] get_target_state: thermal cooling_device1: cur_state=0 [ 439.203777] thermal_zone_trip_update: thermal cooling_device1: old_target=-1, target=1 [ 439.203780] thermal_cdev_update: thermal cooling_device1: zone1->target=1 [ 439.206971] thermal_cdev_update: thermal cooling_device1: set to state 1 [ 439.206979] thermal_zone_trip_update: thermal thermal_zone1: Trip4[type=0,temp=55000]:trend=1,throttle=1 [ 439.207030] get_target_state: thermal cooling_device2: cur_state=1 [ 439.207033] thermal_zone_trip_update: thermal cooling_device2: old_target=1, target=1 [ 439.207148] thermal_zone_trip_update: thermal thermal_zone1: Trip5[type=0,temp=45000]:trend=1,throttle=1 [ 439.207182] get_target_state: thermal cooling_device3: cur_state=1 [ 439.207185] thermal_zone_trip_update: thermal cooling_device3: old_target=1, target=1 [ 439.207189] thermal_zone_trip_update: thermal thermal_zone1: Trip6[type=0,temp=30000]:trend=1,throttle=1 [ 439.207218] get_target_state: thermal cooling_device4: cur_state=1 [ 439.207221] thermal_zone_trip_update: thermal cooling_device4: old_target=1, target=1 [ 439.213120] update_temperature: thermal thermal_zone1: last_temperature=75000, current_temperature=75000 [ 439.213126] thermal_zone_trip_update: thermal thermal_zone1: Trip1[type=1,temp=107000]:trend=2,throttle=0 [ 439.213130] get_target_state: thermal cooling_device6: cur_state=0 [ 439.213133] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 439.213136] get_target_state: thermal cooling_device5: cur_state=0 [ 439.213139] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 439.213142] thermal_zone_trip_update: thermal thermal_zone1: Trip2[type=0,temp=90000]:trend=0,throttle=0 [ 439.213174] get_target_state: thermal cooling_device0: cur_state=0 [ 439.213177] thermal_zone_trip_update: thermal cooling_device0: old_target=-1, target=-1 [ 439.213180] thermal_zone_trip_update: thermal thermal_zone1: Trip3[type=0,temp=67000]:trend=1,throttle=1 [ 439.213210] get_target_state: thermal cooling_device1: cur_state=1 [ 439.213212] thermal_zone_trip_update: thermal cooling_device1: old_target=1, target=1 [ 439.213216] thermal_zone_trip_update: thermal thermal_zone1: Trip4[type=0,temp=55000]:trend=1,throttle=1 [ 439.213244] get_target_state: thermal cooling_device2: cur_state=1 [ 439.213246] thermal_zone_trip_update: thermal cooling_device2: old_target=1, target=1 [ 439.213250] thermal_zone_trip_update: thermal thermal_zone1: Trip5[type=0,temp=45000]:trend=1,throttle=1 [ 439.213277] get_target_state: thermal cooling_device3: cur_state=1 [ 439.213279] thermal_zone_trip_update: thermal cooling_device3: old_target=1, target=1 [ 439.213283] thermal_zone_trip_update: thermal thermal_zone1: Trip6[type=0,temp=30000]:trend=1,throttle=1 [ 439.213310] get_target_state: thermal cooling_device4: cur_state=1 [ 439.213312] thermal_zone_trip_update: thermal cooling_device4: old_target=1, target=1 [ 561.252603] TuxOnIce 3.3, with support for checksumming, usm, compression, block i/o, swap storage, file storage, userui. [ 561.252854] Initiating a hibernation cycle. [ 561.267950] Console is 65x210. [ 561.282110] Starting other threads.Freezing user space processes ... (elapsed 0.002 seconds) done. [ 561.283087] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 561.656667] Restarting kernel threads ... done. [ 561.769275] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 563.777095] ...20%...40%...60%...80% [ 567.633091] Waited for i/o due to synchronous I/O 2 times. [ 567.633095] Waited for i/o due to throughput_throttle 659 times. [ 567.633934] Suspending console(s) (use no_console_suspend to debug) [ 567.635244] serial 00:05: disabled [ 567.820074] PM: freeze of devices complete after 186.136 msecs [ 567.831047] PM: late freeze of devices complete after 10.969 msecs [ 567.832204] PM: noirq freeze of devices complete after 1.153 msecs [ 567.832576] ACPI: Preparing to enter system sleep state S4 [ 567.837089] PM: Saving platform NVS memory [ 567.846218] Disabling non-boot CPUs ... [ 567.847004] Removed affinity for 272 processes to cpu 1 [ 567.847004] kvm: disabling virtualization on CPU1 [ 567.847560] smpboot: CPU 1 is now offline [ 567.847723] PM: Restoring platform NVS memory [ 567.847723] Enabling non-boot CPUs ... [ 567.848050] x86: Booting SMP configuration: [ 567.848051] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 567.847723] kvm: enabling virtualization on CPU1 [ 567.859306] Added affinity for 258 processes to cpu 1 [ 567.859307] Released forced binding to cpu0 for 258 processes [ 567.859669] CPU1 is up [ 567.862135] ACPI: Waking up from system sleep state S4 [ 567.906414] acpi LNXPOWER:07: Turning ON [ 567.909071] acpi LNXPOWER:06: Turning ON [ 567.912070] acpi LNXPOWER:05: Turning ON [ 567.915069] acpi LNXPOWER:04: Turning ON [ 567.918069] acpi LNXPOWER:03: Turning ON [ 567.921121] acpi LNXPOWER:01: Turning OFF [ 567.937109] PM: noirq restore of devices complete after 15.972 msecs [ 567.937650] PM: early restore of devices complete after 0.474 msecs [ 567.938040] usb usb3: root hub lost power or was reset [ 567.938074] usb usb4: root hub lost power or was reset [ 567.938106] usb usb5: root hub lost power or was reset [ 567.938131] usb usb1: root hub lost power or was reset [ 567.941146] usb usb6: root hub lost power or was reset [ 567.941179] usb usb7: root hub lost power or was reset [ 567.941210] usb usb8: root hub lost power or was reset [ 567.941231] usb usb2: root hub lost power or was reset [ 567.952026] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 567.952104] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 567.970873] sd 0:0:0:0: [sda] Starting disk [ 567.970901] sd 1:0:0:0: [sdb] Starting disk [ 567.976768] ------------[ cut here ]------------ [ 567.976810] WARNING: CPU: 0 PID: 3310 at drivers/gpu/drm/i915/intel_display.c:10845 check_crtc_state+0xaa0/0xec0 [i915]() [ 567.976811] crtc's computed active state doesn't match tracked active state (expected 0, found 1) [ 567.976836] Modules linked in: pppoe pppox af_packet ppp_generic slhc nf_log_ipv6 xt_pkttype nf_log_ipv4 nf_log_common xt_LOG xt_limit ip6t_REJECT nf_reject_ipv6 xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw ipt_REJECT nf_reject_ipv4 iptable_raw xt_CT iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack ip6table_filter ip6_tables x_tables pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) fuse hp_wmi sparse_keymap rfkill iTCO_wdt iTCO_vendor_support snd_hda_codec_hdmi snd_hda_codec_analog snd_hda_codec_generic coretemp kvm_intel kvm joydev serio_raw snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device lpc_ich mfd_core tg3 libphy ptp pps_core [ 567.976847] snd soundcore wmi battery tpm_infineon tpm_tis tpm evdev hp_accel lis3lv02d input_polldev ac acpi_cpufreq sg loop dm_mod ipv6 autofs4 btrfs raid6_pq xor i915 drm_kms_helper drm i2c_algo_bit video button [ 567.976850] CPU: 0 PID: 3310 Comm: kworker/u8:3 Tainted: G W O 3.19.1-GCnew4AwithTOI #17 [ 567.976850] Hardware name: Hewlett-Packard HP Compaq 6730b (KU489ET#ABD)/30DD, BIOS 68PDD Ver. F.20 12/07/2011 [ 567.976855] Workqueue: events_unbound async_run_entry_fn [ 567.976858] ffffffffa016ee80 ffff8800a7213798 ffffffff814d393f ffffffff81a2e1b8 [ 567.976859] ffff8800a72137e8 ffff8800a72137d8 ffffffff81044250 ffff8800a7213838 [ 567.976861] 0000000000000001 ffff8800b54a3000 ffff880139060000 ffff8800b54a3358 [ 567.976862] Call Trace: [ 567.976868] [] dump_stack+0x4c/0x6e [ 567.976870] [] warn_slowpath_common+0x80/0xc0 [ 567.976872] [] warn_slowpath_fmt+0x41/0x50 [ 567.976891] [] ? intel_lvds_get_config+0x41/0xe0 [i915] [ 567.976908] [] check_crtc_state+0xaa0/0xec0 [i915] [ 567.976926] [] intel_modeset_check_state+0x2ac/0x980 [i915] [ 567.976943] [] intel_set_mode+0x76/0x90 [i915] [ 567.976960] [] intel_modeset_setup_hw_state+0x7a0/0xcb0 [i915] [ 567.976980] [] ? __drm_modeset_lock_all+0xa6/0x110 [drm] [ 567.976989] [] i915_drm_resume+0x123/0x1a0 [i915] [ 567.977000] [] i915_pm_resume+0x1b/0x20 [i915] [ 567.977013] [] pci_pm_restore+0x7c/0xd0 [ 567.977015] [] ? pci_pm_suspend_noirq+0x1a0/0x1a0 [ 567.977017] [] dpm_run_callback+0x26/0x60 [ 567.977018] [] device_resume+0x87/0x1a0 [ 567.977028] [] async_resume+0x1c/0x50 [ 567.977030] [] async_run_entry_fn+0x47/0x160 [ 567.977033] [] process_one_work+0x129/0x300 [ 567.977034] [] worker_thread+0x119/0x450 [ 567.977037] [] ? cancel_delayed_work_sync+0x10/0x10 [ 567.977038] [] kthread+0xc4/0xe0 [ 567.977040] [] ? set_current_groups+0x20/0x40 [ 567.977042] [] ? kthread_create_on_node+0x180/0x180 [ 567.977044] [] ret_from_fork+0x7c/0xb0 [ 567.977046] [] ? kthread_create_on_node+0x180/0x180 [ 567.977047] ---[ end trace 77c9536f8961407b ]--- [ 567.977069] [drm:check_crtc_state [i915]] *ERROR* mismatch in adjusted_mode.flags(DRM_MODE_FLAG_NHSYNC) (expected 2, found 0) [ 567.977069] ------------[ cut here ]------------ [ 567.977086] WARNING: CPU: 0 PID: 3310 at drivers/gpu/drm/i915/intel_display.c:10872 check_crtc_state+0x7fc/0xec0 [i915]() [ 567.977086] pipe state doesn't match! [ 567.977111] Modules linked in: pppoe pppox af_packet ppp_generic slhc nf_log_ipv6 xt_pkttype nf_log_ipv4 nf_log_common xt_LOG xt_limit ip6t_REJECT nf_reject_ipv6 xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw ipt_REJECT nf_reject_ipv4 iptable_raw xt_CT iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack ip6table_filter ip6_tables x_tables pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) fuse hp_wmi sparse_keymap rfkill iTCO_wdt iTCO_vendor_support snd_hda_codec_hdmi snd_hda_codec_analog snd_hda_codec_generic coretemp kvm_intel kvm joydev serio_raw snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device lpc_ich mfd_core tg3 libphy ptp pps_core [ 567.977121] snd soundcore wmi battery tpm_infineon tpm_tis tpm evdev hp_accel lis3lv02d input_polldev ac acpi_cpufreq sg loop dm_mod ipv6 autofs4 btrfs raid6_pq xor i915 drm_kms_helper drm i2c_algo_bit video button [ 567.977123] CPU: 0 PID: 3310 Comm: kworker/u8:3 Tainted: G W O 3.19.1-GCnew4AwithTOI #17 [ 567.977124] Hardware name: Hewlett-Packard HP Compaq 6730b (KU489ET#ABD)/30DD, BIOS 68PDD Ver. F.20 12/07/2011 [ 567.977126] Workqueue: events_unbound async_run_entry_fn [ 567.977128] ffffffffa016ee80 ffff8800a7213798 ffffffff814d393f ffffffff81a2e1b8 [ 567.977130] ffff8800a72137e8 ffff8800a72137d8 ffffffff81044250 ffff8800a72137e0 [ 567.977132] ffff8800b54d4060 ffff8800b54a3000 ffff880139060000 ffff8800b54a3358 [ 567.977132] Call Trace: [ 567.977136] [] dump_stack+0x4c/0x6e [ 567.977137] [] warn_slowpath_common+0x80/0xc0 [ 567.977139] [] warn_slowpath_fmt+0x41/0x50 [ 567.977157] [] check_crtc_state+0x7fc/0xec0 [i915] [ 567.977176] [] intel_modeset_check_state+0x2ac/0x980 [i915] [ 567.977193] [] intel_set_mode+0x76/0x90 [i915] [ 567.977211] [] intel_modeset_setup_hw_state+0x7a0/0xcb0 [i915] [ 567.977224] [] ? __drm_modeset_lock_all+0xa6/0x110 [drm] [ 567.977240] [] i915_drm_resume+0x123/0x1a0 [i915] [ 567.977250] [] i915_pm_resume+0x1b/0x20 [i915] [ 567.977252] [] pci_pm_restore+0x7c/0xd0 [ 567.977254] [] ? pci_pm_suspend_noirq+0x1a0/0x1a0 [ 567.977255] [] dpm_run_callback+0x26/0x60 [ 567.977257] [] device_resume+0x87/0x1a0 [ 567.977258] [] async_resume+0x1c/0x50 [ 567.977260] [] async_run_entry_fn+0x47/0x160 [ 567.977262] [] process_one_work+0x129/0x300 [ 567.977264] [] worker_thread+0x119/0x450 [ 567.977266] [] ? cancel_delayed_work_sync+0x10/0x10 [ 567.977267] [] kthread+0xc4/0xe0 [ 567.977269] [] ? set_current_groups+0x20/0x40 [ 567.977271] [] ? kthread_create_on_node+0x180/0x180 [ 567.977272] [] ret_from_fork+0x7c/0xb0 [ 567.977274] [] ? kthread_create_on_node+0x180/0x180 [ 567.977275] ---[ end trace 77c9536f8961407c ]--- [ 567.986690] rtc_cmos 00:04: System wakeup disabled by ACPI [ 567.987409] serial 00:05: activated [ 568.251038] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 568.251066] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 568.253031] ata6: SATA link down (SStatus 0 SControl 300) [ 568.255988] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 568.256827] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 568.262748] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 568.262850] ata2.00: configured for UDMA/133 [ 568.264484] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 568.267988] ata1.00: configured for UDMA/133 [ 568.338390] PM: restore of devices complete after 400.736 msecs [ 568.338409] PM: recover of devices complete after 0.007 msecs [ 568.338410] cpufreq: cpufreq_resume: Failed to start governor for policy: ffff8800b7c4b000 [ 568.338411] cpufreq: cpufreq_resume: Failed to start governor for policy: ffff8800b7c4aa00 [ 569.334825] ...20%...40%...60%...80% [ 573.007468] toi_start_one_readahead: toi_bio_rw_page returned -28. [ 573.043199] Waited for i/o due to readahead not ready 4183 times. [ 573.043201] Waited for i/o due to throughput_throttle 8610 times. [ 573.047594] Restarting tasks ... done. [ 573.101420] update_temperature: thermal thermal_zone0: last_temperature N/A, current_temperature=60000 [ 573.102089] update_temperature: thermal thermal_zone1: last_temperature N/A, current_temperature=67000 [ 573.102094] thermal_zone_trip_update: thermal thermal_zone1: Trip1[type=1,temp=107000]:trend=5,throttle=0 [ 573.102100] get_target_state: thermal cooling_device6: cur_state=0 [ 573.102102] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 573.102106] get_target_state: thermal cooling_device5: cur_state=0 [ 573.102108] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 573.102111] thermal_cdev_update: thermal cooling_device6: zone1->target=18446744073709551615 [ 573.102114] thermal_cdev_update: thermal cooling_device6: zone2->target=18446744073709551615 [ 573.102117] thermal_cdev_update: thermal cooling_device6: zone3->target=18446744073709551615 [ 573.102130] thermal_cdev_update: thermal cooling_device6: set to state 0 [ 573.102132] thermal_cdev_update: thermal cooling_device5: zone1->target=18446744073709551615 [ 573.102135] thermal_cdev_update: thermal cooling_device5: zone2->target=18446744073709551615 [ 573.102137] thermal_cdev_update: thermal cooling_device5: zone3->target=18446744073709551615 [ 573.102143] thermal_cdev_update: thermal cooling_device5: set to state 0 [ 573.102146] thermal_zone_trip_update: thermal thermal_zone1: Trip2[type=0,temp=90000]:trend=5,throttle=0 [ 573.102180] get_target_state: thermal cooling_device0: cur_state=1 [ 573.102183] thermal_zone_trip_update: thermal cooling_device0: old_target=-1, target=-1 [ 573.102186] thermal_cdev_update: thermal cooling_device0: zone1->target=18446744073709551615 [ 573.104508] thermal_cdev_update: thermal cooling_device0: set to state 0 [ 573.104513] thermal_zone_trip_update: thermal thermal_zone1: Trip3[type=0,temp=75000]:trend=5,throttle=0 [ 573.104546] get_target_state: thermal cooling_device1: cur_state=1 [ 573.104549] thermal_zone_trip_update: thermal cooling_device1: old_target=-1, target=-1 [ 573.104552] thermal_cdev_update: thermal cooling_device1: zone1->target=18446744073709551615 [ 573.107536] thermal_cdev_update: thermal cooling_device1: set to state 0 [ 573.107542] thermal_zone_trip_update: thermal thermal_zone1: Trip4[type=0,temp=55000]:trend=5,throttle=1 [ 573.107575] get_target_state: thermal cooling_device2: cur_state=1 [ 573.107578] thermal_zone_trip_update: thermal cooling_device2: old_target=-1, target=1 [ 573.107580] thermal_cdev_update: thermal cooling_device2: zone1->target=1 [ 573.107583] thermal_cdev_update: thermal cooling_device2: set to state 1 [ 573.107587] thermal_zone_trip_update: thermal thermal_zone1: Trip5[type=0,temp=45000]:trend=5,throttle=1 [ 573.107616] get_target_state: thermal cooling_device3: cur_state=1 [ 573.107618] thermal_zone_trip_update: thermal cooling_device3: old_target=-1, target=1 [ 573.107621] thermal_cdev_update: thermal cooling_device3: zone1->target=1 [ 573.107624] thermal_cdev_update: thermal cooling_device3: set to state 1 [ 573.107627] thermal_zone_trip_update: thermal thermal_zone1: Trip6[type=0,temp=30000]:trend=5,throttle=1 [ 573.107656] get_target_state: thermal cooling_device4: cur_state=1 [ 573.107659] thermal_zone_trip_update: thermal cooling_device4: old_target=-1, target=1 [ 573.107661] thermal_cdev_update: thermal cooling_device4: zone1->target=1 [ 573.107664] thermal_cdev_update: thermal cooling_device4: set to state 1 [ 573.108286] update_temperature: thermal thermal_zone2: last_temperature N/A, current_temperature=57000 [ 573.108291] thermal_zone_trip_update: thermal thermal_zone2: Trip1[type=1,temp=95000]:trend=5,throttle=0 [ 573.108294] get_target_state: thermal cooling_device6: cur_state=0 [ 573.108296] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 573.108299] get_target_state: thermal cooling_device5: cur_state=0 [ 573.108302] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 573.108304] thermal_cdev_update: thermal cooling_device6: zone1->target=18446744073709551615 [ 573.108307] thermal_cdev_update: thermal cooling_device6: zone2->target=18446744073709551615 [ 573.108310] thermal_cdev_update: thermal cooling_device6: zone3->target=18446744073709551615 [ 573.108317] thermal_cdev_update: thermal cooling_device6: set to state 0 [ 573.108320] thermal_cdev_update: thermal cooling_device5: zone1->target=18446744073709551615 [ 573.108323] thermal_cdev_update: thermal cooling_device5: zone2->target=18446744073709551615 [ 573.108325] thermal_cdev_update: thermal cooling_device5: zone3->target=18446744073709551615 [ 573.108330] thermal_cdev_update: thermal cooling_device5: set to state 0 [ 573.111834] update_temperature: thermal thermal_zone3: last_temperature N/A, current_temperature=24900 [ 573.111839] thermal_zone_trip_update: thermal thermal_zone3: Trip1[type=1,temp=60000]:trend=5,throttle=0 [ 573.111842] get_target_state: thermal cooling_device6: cur_state=0 [ 573.111844] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 573.111847] get_target_state: thermal cooling_device5: cur_state=0 [ 573.111850] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 573.111853] thermal_cdev_update: thermal cooling_device6: zone1->target=18446744073709551615 [ 573.111855] thermal_cdev_update: thermal cooling_device6: zone2->target=18446744073709551615 [ 573.111858] thermal_cdev_update: thermal cooling_device6: zone3->target=18446744073709551615 [ 573.111865] thermal_cdev_update: thermal cooling_device6: set to state 0 [ 573.111868] thermal_cdev_update: thermal cooling_device5: zone1->target=18446744073709551615 [ 573.111871] thermal_cdev_update: thermal cooling_device5: zone2->target=18446744073709551615 [ 573.111873] thermal_cdev_update: thermal cooling_device5: zone3->target=18446744073709551615 [ 573.111879] thermal_cdev_update: thermal cooling_device5: set to state 0 [ 573.113590] update_temperature: thermal thermal_zone4: last_temperature N/A, current_temperature=63000 [ 573.113595] video LNXVIDEO:00: Restoring backlight state [ 573.139344] TuxOnIce debugging info: - TuxOnIce core : 3.3 - Kernel Version : 3.19.1-GCnew4AwithTOI - Compiler vers. : 4.8 - Attempt number : 2 - Parameters : 0 536576 0 0 -2 5 - Overall expected compression percentage: 0. - Checksum method is 'md4'. 0 pages resaved in atomic copy. - Compressor is 'lzo'. Compressed 1491058688 bytes into 614528036 (58 percent compression). - Block I/O active. Used 151496 pages from swap on /dev/sdb10. - Max outstanding reads 1024. Max writes 2025. Memory_needed: 1024 x (4096 + 344 + 112) = 4661248 bytes. Free mem throttle point reached 0. - Swap Allocator enabled. Swap available for image: 2621439 pages. - File Allocator active. Storage available for image: 0 pages. - I/O speed: Write 199 MB/s, Read 228 MB/s. - Extra pages : 834 used/2000. - Result : Succeeded. [ 576.788051] tg3 0000:84:00.0 eth0: Link is up at 100 Mbps, full duplex [ 576.788055] tg3 0000:84:00.0 eth0: Flow control is off for TX and off for RX [ 582.560346] update_temperature: thermal thermal_zone1: last_temperature=67000, current_temperature=75000 [ 582.560354] thermal_zone_trip_update: thermal thermal_zone1: Trip1[type=1,temp=107000]:trend=2,throttle=0 [ 582.560360] get_target_state: thermal cooling_device6: cur_state=0 [ 582.560362] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 582.560366] get_target_state: thermal cooling_device5: cur_state=0 [ 582.560368] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 582.560373] thermal_zone_trip_update: thermal thermal_zone1: Trip2[type=0,temp=90000]:trend=1,throttle=0 [ 582.560408] get_target_state: thermal cooling_device0: cur_state=0 [ 582.560411] thermal_zone_trip_update: thermal cooling_device0: old_target=-1, target=-1 [ 582.560414] thermal_zone_trip_update: thermal thermal_zone1: Trip3[type=0,temp=75000]:trend=1,throttle=1 [ 582.560444] get_target_state: thermal cooling_device1: cur_state=0 [ 582.560446] thermal_zone_trip_update: thermal cooling_device1: old_target=-1, target=1 [ 582.560449] thermal_cdev_update: thermal cooling_device1: zone1->target=1 [ 582.563671] thermal_cdev_update: thermal cooling_device1: set to state 1 [ 582.563682] thermal_zone_trip_update: thermal thermal_zone1: Trip4[type=0,temp=55000]:trend=1,throttle=1 [ 582.563732] get_target_state: thermal cooling_device2: cur_state=1 [ 582.563734] thermal_zone_trip_update: thermal cooling_device2: old_target=1, target=1 [ 582.563739] thermal_zone_trip_update: thermal thermal_zone1: Trip5[type=0,temp=45000]:trend=1,throttle=1 [ 582.563771] get_target_state: thermal cooling_device3: cur_state=1 [ 582.563773] thermal_zone_trip_update: thermal cooling_device3: old_target=1, target=1 [ 582.563777] thermal_zone_trip_update: thermal thermal_zone1: Trip6[type=0,temp=30000]:trend=1,throttle=1 [ 582.563807] get_target_state: thermal cooling_device4: cur_state=1 [ 582.563810] thermal_zone_trip_update: thermal cooling_device4: old_target=1, target=1 [ 582.566692] update_temperature: thermal thermal_zone1: last_temperature=75000, current_temperature=75000 [ 582.566700] thermal_zone_trip_update: thermal thermal_zone1: Trip1[type=1,temp=107000]:trend=2,throttle=0 [ 582.566706] get_target_state: thermal cooling_device6: cur_state=0 [ 582.566708] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 582.566712] get_target_state: thermal cooling_device5: cur_state=0 [ 582.566714] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 582.566718] thermal_zone_trip_update: thermal thermal_zone1: Trip2[type=0,temp=90000]:trend=0,throttle=0 [ 582.566751] get_target_state: thermal cooling_device0: cur_state=0 [ 582.566754] thermal_zone_trip_update: thermal cooling_device0: old_target=-1, target=-1 [ 582.566757] thermal_zone_trip_update: thermal thermal_zone1: Trip3[type=0,temp=67000]:trend=1,throttle=1 [ 582.566786] get_target_state: thermal cooling_device1: cur_state=1 [ 582.566788] thermal_zone_trip_update: thermal cooling_device1: old_target=1, target=1 [ 582.566792] thermal_zone_trip_update: thermal thermal_zone1: Trip4[type=0,temp=55000]:trend=1,throttle=1 [ 582.566820] get_target_state: thermal cooling_device2: cur_state=1 [ 582.566823] thermal_zone_trip_update: thermal cooling_device2: old_target=1, target=1 [ 582.566826] thermal_zone_trip_update: thermal thermal_zone1: Trip5[type=0,temp=45000]:trend=1,throttle=1 [ 582.566854] get_target_state: thermal cooling_device3: cur_state=1 [ 582.566857] thermal_zone_trip_update: thermal cooling_device3: old_target=1, target=1 [ 582.566860] thermal_zone_trip_update: thermal thermal_zone1: Trip6[type=0,temp=30000]:trend=1,throttle=1 [ 582.566889] get_target_state: thermal cooling_device4: cur_state=1 [ 582.566891] thermal_zone_trip_update: thermal cooling_device4: old_target=1, target=1 [ 694.932832] update_temperature: thermal thermal_zone1: last_temperature=75000, current_temperature=66000 [ 694.932839] thermal_zone_trip_update: thermal thermal_zone1: Trip1[type=1,temp=107000]:trend=2,throttle=0 [ 694.932844] get_target_state: thermal cooling_device6: cur_state=0 [ 694.932846] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 694.932850] get_target_state: thermal cooling_device5: cur_state=0 [ 694.932852] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 694.932856] thermal_zone_trip_update: thermal thermal_zone1: Trip2[type=0,temp=90000]:trend=2,throttle=0 [ 694.932887] get_target_state: thermal cooling_device0: cur_state=0 [ 694.932890] thermal_zone_trip_update: thermal cooling_device0: old_target=-1, target=-1 [ 694.932893] thermal_zone_trip_update: thermal thermal_zone1: Trip3[type=0,temp=67000]:trend=2,throttle=0 [ 694.932921] get_target_state: thermal cooling_device1: cur_state=1 [ 694.932923] thermal_zone_trip_update: thermal cooling_device1: old_target=1, target=0 [ 694.932926] thermal_cdev_update: thermal cooling_device1: zone1->target=0 [ 694.935842] thermal_cdev_update: thermal cooling_device1: set to state 0 [ 694.935849] thermal_zone_trip_update: thermal thermal_zone1: Trip4[type=0,temp=55000]:trend=1,throttle=1 [ 694.935895] get_target_state: thermal cooling_device2: cur_state=1 [ 694.935899] thermal_zone_trip_update: thermal cooling_device2: old_target=1, target=1 [ 694.935904] thermal_zone_trip_update: thermal thermal_zone1: Trip5[type=0,temp=45000]:trend=1,throttle=1 [ 694.935944] get_target_state: thermal cooling_device3: cur_state=1 [ 694.935948] thermal_zone_trip_update: thermal cooling_device3: old_target=1, target=1 [ 694.935953] thermal_zone_trip_update: thermal thermal_zone1: Trip6[type=0,temp=30000]:trend=1,throttle=1 [ 694.935988] get_target_state: thermal cooling_device4: cur_state=1 [ 694.935990] thermal_zone_trip_update: thermal cooling_device4: old_target=1, target=1 [ 694.937319] update_temperature: thermal thermal_zone1: last_temperature=66000, current_temperature=66000 [ 694.937324] thermal_zone_trip_update: thermal thermal_zone1: Trip1[type=1,temp=107000]:trend=2,throttle=0 [ 694.937327] get_target_state: thermal cooling_device6: cur_state=0 [ 694.937330] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 694.937332] get_target_state: thermal cooling_device5: cur_state=0 [ 694.937335] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 694.937338] thermal_zone_trip_update: thermal thermal_zone1: Trip2[type=0,temp=90000]:trend=0,throttle=0 [ 694.937367] get_target_state: thermal cooling_device0: cur_state=0 [ 694.937370] thermal_zone_trip_update: thermal cooling_device0: old_target=-1, target=-1 [ 694.937373] thermal_zone_trip_update: thermal thermal_zone1: Trip3[type=0,temp=75000]:trend=0,throttle=0 [ 694.937401] get_target_state: thermal cooling_device1: cur_state=0 [ 694.937404] thermal_zone_trip_update: thermal cooling_device1: old_target=0, target=0 [ 694.937407] thermal_zone_trip_update: thermal thermal_zone1: Trip4[type=0,temp=55000]:trend=1,throttle=1 [ 694.937434] get_target_state: thermal cooling_device2: cur_state=1 [ 694.937436] thermal_zone_trip_update: thermal cooling_device2: old_target=1, target=1 [ 694.937440] thermal_zone_trip_update: thermal thermal_zone1: Trip5[type=0,temp=45000]:trend=1,throttle=1 [ 694.937466] get_target_state: thermal cooling_device3: cur_state=1 [ 694.937469] thermal_zone_trip_update: thermal cooling_device3: old_target=1, target=1 [ 694.937472] thermal_zone_trip_update: thermal thermal_zone1: Trip6[type=0,temp=30000]:trend=1,throttle=1 [ 694.937499] get_target_state: thermal cooling_device4: cur_state=1 [ 694.937501] thermal_zone_trip_update: thermal cooling_device4: old_target=1, target=1 [ 823.466688] PM: Syncing filesystems ... done. [ 823.650423] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 823.652272] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 823.653415] Suspending console(s) (use no_console_suspend to debug) [ 823.654226] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 823.654253] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 823.654298] sd 1:0:0:0: [sdb] Stopping disk [ 823.654319] sd 0:0:0:0: [sda] Stopping disk [ 823.697076] serial 00:05: disabled [ 824.917043] PM: suspend of devices complete after 1263.081 msecs [ 824.938024] PM: late suspend of devices complete after 20.977 msecs [ 824.938746] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [ 824.938751] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [ 824.938877] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [ 824.939139] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI [ 824.939282] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI [ 824.939351] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI [ 824.939386] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [ 824.939420] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI [ 824.950022] PM: noirq suspend of devices complete after 11.994 msecs [ 824.950395] ACPI: Preparing to enter system sleep state S3 [ 824.955145] PM: Saving platform NVS memory [ 824.964394] Disabling non-boot CPUs ... [ 824.965006] Removed affinity for 308 processes to cpu 1 [ 824.965006] kvm: disabling virtualization on CPU1 [ 824.965740] smpboot: CPU 1 is now offline [ 824.966008] ACPI: Low-level resume complete [ 824.966008] PM: Restoring platform NVS memory [ 824.966008] Enabling non-boot CPUs ... [ 824.966008] x86: Booting SMP configuration: [ 824.966008] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 824.966008] kvm: enabling virtualization on CPU1 [ 824.977502] Added affinity for 241 processes to cpu 1 [ 824.977502] Released forced binding to cpu0 for 241 processes [ 824.977693] CPU1 is up [ 824.980406] ACPI: Waking up from system sleep state S3 [ 825.022120] acpi LNXPOWER:02: Turning OFF [ 825.022164] acpi LNXPOWER:01: Turning OFF [ 825.022394] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI [ 825.022483] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI [ 825.022607] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI [ 825.023071] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [ 825.023152] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [ 825.023236] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [ 825.033101] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI [ 825.034083] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [ 825.040109] PM: noirq resume of devices complete after 17.891 msecs [ 825.054793] PM: early resume of devices complete after 14.638 msecs [ 825.056184] usb usb3: root hub lost power or was reset [ 825.056232] usb usb4: root hub lost power or was reset [ 825.056279] usb usb6: root hub lost power or was reset [ 825.057253] usb usb7: root hub lost power or was reset [ 825.057302] usb usb8: root hub lost power or was reset [ 825.057402] sd 0:0:0:0: [sda] Starting disk [ 825.057419] sd 1:0:0:0: [sdb] Starting disk [ 825.057575] usb usb5: root hub lost power or was reset [ 825.090408] rtc_cmos 00:04: System wakeup disabled by ACPI [ 825.091410] serial 00:05: activated [ 825.368024] ata6: SATA link down (SStatus 0 SControl 300) [ 825.431553] PM: resume of devices complete after 376.756 msecs [ 825.432148] Restarting tasks ... done. [ 825.445767] update_temperature: thermal thermal_zone0: last_temperature N/A, current_temperature=53000 [ 825.448195] update_temperature: thermal thermal_zone1: last_temperature N/A, current_temperature=55000 [ 825.448200] thermal_zone_trip_update: thermal thermal_zone1: Trip1[type=1,temp=107000]:trend=5,throttle=0 [ 825.448205] get_target_state: thermal cooling_device6: cur_state=0 [ 825.448207] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 825.448211] get_target_state: thermal cooling_device5: cur_state=0 [ 825.448213] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 825.448216] thermal_cdev_update: thermal cooling_device6: zone1->target=18446744073709551615 [ 825.448219] thermal_cdev_update: thermal cooling_device6: zone2->target=18446744073709551615 [ 825.448222] thermal_cdev_update: thermal cooling_device6: zone3->target=18446744073709551615 [ 825.448234] thermal_cdev_update: thermal cooling_device6: set to state 0 [ 825.448237] thermal_cdev_update: thermal cooling_device5: zone1->target=18446744073709551615 [ 825.448239] thermal_cdev_update: thermal cooling_device5: zone2->target=18446744073709551615 [ 825.448242] thermal_cdev_update: thermal cooling_device5: zone3->target=18446744073709551615 [ 825.448247] thermal_cdev_update: thermal cooling_device5: set to state 0 [ 825.448250] thermal_zone_trip_update: thermal thermal_zone1: Trip2[type=0,temp=90000]:trend=5,throttle=0 [ 825.448327] get_target_state: thermal cooling_device0: cur_state=1 [ 825.448330] thermal_zone_trip_update: thermal cooling_device0: old_target=-1, target=-1 [ 825.448333] thermal_cdev_update: thermal cooling_device0: zone1->target=18446744073709551615 [ 825.454474] thermal_cdev_update: thermal cooling_device0: set to state 0 [ 825.454479] thermal_zone_trip_update: thermal thermal_zone1: Trip3[type=0,temp=75000]:trend=5,throttle=0 [ 825.454513] get_target_state: thermal cooling_device1: cur_state=1 [ 825.454516] thermal_zone_trip_update: thermal cooling_device1: old_target=-1, target=-1 [ 825.454519] thermal_cdev_update: thermal cooling_device1: zone1->target=18446744073709551615 [ 825.462636] thermal_cdev_update: thermal cooling_device1: set to state 0 [ 825.462641] thermal_zone_trip_update: thermal thermal_zone1: Trip4[type=0,temp=60000]:trend=5,throttle=0 [ 825.462675] get_target_state: thermal cooling_device2: cur_state=1 [ 825.462678] thermal_zone_trip_update: thermal cooling_device2: old_target=-1, target=-1 [ 825.462681] thermal_cdev_update: thermal cooling_device2: zone1->target=18446744073709551615 [ 825.474784] thermal_cdev_update: thermal cooling_device2: set to state 0 [ 825.474789] thermal_zone_trip_update: thermal thermal_zone1: Trip5[type=0,temp=45000]:trend=5,throttle=1 [ 825.474844] get_target_state: thermal cooling_device3: cur_state=1 [ 825.474847] thermal_zone_trip_update: thermal cooling_device3: old_target=-1, target=1 [ 825.474850] thermal_cdev_update: thermal cooling_device3: zone1->target=1 [ 825.474852] thermal_cdev_update: thermal cooling_device3: set to state 1 [ 825.474855] thermal_zone_trip_update: thermal thermal_zone1: Trip6[type=0,temp=30000]:trend=5,throttle=1 [ 825.474888] get_target_state: thermal cooling_device4: cur_state=1 [ 825.474891] thermal_zone_trip_update: thermal cooling_device4: old_target=-1, target=1 [ 825.474894] thermal_cdev_update: thermal cooling_device4: zone1->target=1 [ 825.474896] thermal_cdev_update: thermal cooling_device4: set to state 1 [ 825.476176] update_temperature: thermal thermal_zone1: last_temperature=55000, current_temperature=55000 [ 825.476180] thermal_zone_trip_update: thermal thermal_zone1: Trip1[type=1,temp=107000]:trend=2,throttle=0 [ 825.476184] get_target_state: thermal cooling_device6: cur_state=0 [ 825.476186] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 825.476189] get_target_state: thermal cooling_device5: cur_state=0 [ 825.476192] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 825.476195] thermal_zone_trip_update: thermal thermal_zone1: Trip2[type=0,temp=90000]:trend=0,throttle=0 [ 825.476224] get_target_state: thermal cooling_device0: cur_state=0 [ 825.476227] thermal_zone_trip_update: thermal cooling_device0: old_target=-1, target=-1 [ 825.476231] thermal_zone_trip_update: thermal thermal_zone1: Trip3[type=0,temp=75000]:trend=0,throttle=0 [ 825.476251] update_temperature: thermal thermal_zone2: last_temperature N/A, current_temperature=51000 [ 825.476256] thermal_zone_trip_update: thermal thermal_zone2: Trip1[type=1,temp=95000]:trend=5,throttle=0 [ 825.476259] get_target_state: thermal cooling_device6: cur_state=0 [ 825.476261] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 825.476264] get_target_state: thermal cooling_device5: cur_state=0 [ 825.476266] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 825.476269] thermal_cdev_update: thermal cooling_device6: zone1->target=18446744073709551615 [ 825.476272] thermal_cdev_update: thermal cooling_device6: zone2->target=18446744073709551615 [ 825.476274] thermal_cdev_update: thermal cooling_device6: zone3->target=18446744073709551615 [ 825.476282] thermal_cdev_update: thermal cooling_device6: set to state 0 [ 825.476287] thermal_cdev_update: thermal cooling_device5: zone1->target=18446744073709551615 [ 825.476292] thermal_cdev_update: thermal cooling_device5: zone2->target=18446744073709551615 [ 825.476297] thermal_cdev_update: thermal cooling_device5: zone3->target=18446744073709551615 [ 825.476306] thermal_cdev_update: thermal cooling_device5: set to state 0 [ 825.476361] get_target_state: thermal cooling_device1: cur_state=0 [ 825.476364] thermal_zone_trip_update: thermal cooling_device1: old_target=-1, target=-1 [ 825.476367] thermal_zone_trip_update: thermal thermal_zone1: Trip4[type=0,temp=60000]:trend=0,throttle=0 [ 825.476418] get_target_state: thermal cooling_device2: cur_state=0 [ 825.476421] thermal_zone_trip_update: thermal cooling_device2: old_target=-1, target=-1 [ 825.476425] thermal_zone_trip_update: thermal thermal_zone1: Trip5[type=0,temp=45000]:trend=1,throttle=1 [ 825.476452] get_target_state: thermal cooling_device3: cur_state=1 [ 825.476455] thermal_zone_trip_update: thermal cooling_device3: old_target=1, target=1 [ 825.476459] thermal_zone_trip_update: thermal thermal_zone1: Trip6[type=0,temp=30000]:trend=1,throttle=1 [ 825.476496] get_target_state: thermal cooling_device4: cur_state=1 [ 825.476498] thermal_zone_trip_update: thermal cooling_device4: old_target=1, target=1 [ 825.489643] update_temperature: thermal thermal_zone3: last_temperature N/A, current_temperature=24900 [ 825.489649] thermal_zone_trip_update: thermal thermal_zone3: Trip1[type=1,temp=60000]:trend=5,throttle=0 [ 825.489653] get_target_state: thermal cooling_device6: cur_state=0 [ 825.489656] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 825.489659] get_target_state: thermal cooling_device5: cur_state=0 [ 825.489661] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 825.489664] thermal_cdev_update: thermal cooling_device6: zone1->target=18446744073709551615 [ 825.489667] thermal_cdev_update: thermal cooling_device6: zone2->target=18446744073709551615 [ 825.489669] thermal_cdev_update: thermal cooling_device6: zone3->target=18446744073709551615 [ 825.489680] thermal_cdev_update: thermal cooling_device6: set to state 0 [ 825.489682] thermal_cdev_update: thermal cooling_device5: zone1->target=18446744073709551615 [ 825.489685] thermal_cdev_update: thermal cooling_device5: zone2->target=18446744073709551615 [ 825.489687] thermal_cdev_update: thermal cooling_device5: zone3->target=18446744073709551615 [ 825.489694] thermal_cdev_update: thermal cooling_device5: set to state 0 [ 825.489703] update_temperature: thermal thermal_zone2: last_temperature=51000, current_temperature=51000 [ 825.489707] thermal_zone_trip_update: thermal thermal_zone2: Trip1[type=1,temp=95000]:trend=2,throttle=0 [ 825.489709] get_target_state: thermal cooling_device6: cur_state=0 [ 825.489712] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 825.489714] get_target_state: thermal cooling_device5: cur_state=0 [ 825.489717] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 825.494765] update_temperature: thermal thermal_zone4: last_temperature N/A, current_temperature=65000 [ 825.494770] video LNXVIDEO:00: Restoring backlight state [ 825.498099] update_temperature: thermal thermal_zone3: last_temperature=24900, current_temperature=24900 [ 825.498104] thermal_zone_trip_update: thermal thermal_zone3: Trip1[type=1,temp=60000]:trend=2,throttle=0 [ 825.498107] get_target_state: thermal cooling_device6: cur_state=0 [ 825.498110] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 825.498112] get_target_state: thermal cooling_device5: cur_state=0 [ 825.498115] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 827.317110] tg3 0000:84:00.0 eth0: Link is up at 100 Mbps, full duplex [ 827.317114] tg3 0000:84:00.0 eth0: Flow control is off for TX and off for RX [ 828.375029] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 828.380873] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 828.386809] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 828.386914] ata2.00: configured for UDMA/133 [ 828.426044] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 828.430968] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 828.439506] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 828.443030] ata1.00: configured for UDMA/133 [ 871.712400] update_temperature: thermal thermal_zone1: last_temperature=55000, current_temperature=60000 [ 871.712409] thermal_zone_trip_update: thermal thermal_zone1: Trip1[type=1,temp=107000]:trend=2,throttle=0 [ 871.712415] get_target_state: thermal cooling_device6: cur_state=0 [ 871.712418] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 871.712421] get_target_state: thermal cooling_device5: cur_state=0 [ 871.712424] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 871.712428] thermal_zone_trip_update: thermal thermal_zone1: Trip2[type=0,temp=90000]:trend=1,throttle=0 [ 871.712462] get_target_state: thermal cooling_device0: cur_state=0 [ 871.712465] thermal_zone_trip_update: thermal cooling_device0: old_target=-1, target=-1 [ 871.712469] thermal_zone_trip_update: thermal thermal_zone1: Trip3[type=0,temp=75000]:trend=1,throttle=0 [ 871.712498] get_target_state: thermal cooling_device1: cur_state=0 [ 871.712500] thermal_zone_trip_update: thermal cooling_device1: old_target=-1, target=-1 [ 871.712504] thermal_zone_trip_update: thermal thermal_zone1: Trip4[type=0,temp=60000]:trend=1,throttle=1 [ 871.712532] get_target_state: thermal cooling_device2: cur_state=0 [ 871.712535] thermal_zone_trip_update: thermal cooling_device2: old_target=-1, target=1 [ 871.712537] thermal_cdev_update: thermal cooling_device2: zone1->target=1 [ 871.714962] thermal_cdev_update: thermal cooling_device2: set to state 1 [ 871.714969] thermal_zone_trip_update: thermal thermal_zone1: Trip5[type=0,temp=45000]:trend=1,throttle=1 [ 871.715260] get_target_state: thermal cooling_device3: cur_state=1 [ 871.715264] thermal_zone_trip_update: thermal cooling_device3: old_target=1, target=1 [ 871.715268] thermal_zone_trip_update: thermal thermal_zone1: Trip6[type=0,temp=30000]:trend=1,throttle=1 [ 871.715303] get_target_state: thermal cooling_device4: cur_state=1 [ 871.715306] thermal_zone_trip_update: thermal cooling_device4: old_target=1, target=1 [ 871.716528] update_temperature: thermal thermal_zone1: last_temperature=60000, current_temperature=60000 [ 871.716533] thermal_zone_trip_update: thermal thermal_zone1: Trip1[type=1,temp=107000]:trend=2,throttle=0 [ 871.716538] get_target_state: thermal cooling_device6: cur_state=0 [ 871.716540] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 871.716543] get_target_state: thermal cooling_device5: cur_state=0 [ 871.716546] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 871.716549] thermal_zone_trip_update: thermal thermal_zone1: Trip2[type=0,temp=90000]:trend=0,throttle=0 [ 871.716579] get_target_state: thermal cooling_device0: cur_state=0 [ 871.716582] thermal_zone_trip_update: thermal cooling_device0: old_target=-1, target=-1 [ 871.716586] thermal_zone_trip_update: thermal thermal_zone1: Trip3[type=0,temp=75000]:trend=0,throttle=0 [ 871.716613] get_target_state: thermal cooling_device1: cur_state=0 [ 871.716616] thermal_zone_trip_update: thermal cooling_device1: old_target=-1, target=-1 [ 871.716620] thermal_zone_trip_update: thermal thermal_zone1: Trip4[type=0,temp=55000]:trend=1,throttle=1 [ 871.716647] get_target_state: thermal cooling_device2: cur_state=1 [ 871.716649] thermal_zone_trip_update: thermal cooling_device2: old_target=1, target=1 [ 871.716653] thermal_zone_trip_update: thermal thermal_zone1: Trip5[type=0,temp=45000]:trend=1,throttle=1 [ 871.716679] get_target_state: thermal cooling_device3: cur_state=1 [ 871.716682] thermal_zone_trip_update: thermal cooling_device3: old_target=1, target=1 [ 871.716686] thermal_zone_trip_update: thermal thermal_zone1: Trip6[type=0,temp=30000]:trend=1,throttle=1 [ 871.716713] get_target_state: thermal cooling_device4: cur_state=1 [ 871.716716] thermal_zone_trip_update: thermal cooling_device4: old_target=1, target=1 [ 885.642139] dsl0: renamed from ppp0