Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.14.34 (root@server2) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Wed Mar 4 13:10:20 CET 2015
Command line: auto BOOT_IMAGE=Linux-3.14.34 ro root=801 root=/dev/sda1 rootfstype=ext4
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008c7ff] usable
BIOS-e820: [mem 0x000000000008c800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009934efff] usable
BIOS-e820: [mem 0x000000009934f000-0x000000009937efff] reserved
BIOS-e820: [mem 0x000000009937f000-0x000000009938efff] ACPI data
BIOS-e820: [mem 0x000000009938f000-0x00000000998a9fff] ACPI NVS
BIOS-e820: [mem 0x00000000998aa000-0x0000000099ffffff] reserved
BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 90BX0018IX/Aptio CRB, BIOS O07KT49AUS 12/18/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-E7FFF write-through
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FE0000000 write-back
  2 base 09A000000 mask FFE000000 uncachable
  3 base 09C000000 mask FFC000000 uncachable
  4 base 100000000 mask F80000000 write-back
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0x9a000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x9934f max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd820-0x000fd82f] mapped at [ffff8800000fd820]
Base memory trampoline at [ffff880000086000] 86000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x0180e000, 0x0180efff] PGTABLE
BRK [0x0180f000, 0x0180ffff] PGTABLE
BRK [0x01810000, 0x01810fff] PGTABLE
init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
 [mem 0x15fe00000-0x15fffffff] page 2M
BRK [0x01811000, 0x01811fff] PGTABLE
init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
 [mem 0x15c000000-0x15fdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x15bffffff]
 [mem 0x100000000-0x15bffffff] page 2M
BRK [0x01812000, 0x01812fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x9934efff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x991fffff] page 2M
 [mem 0x99200000-0x9934efff] page 4k
ACPI: RSDP 00000000000f0540 000024 (v02 LENOVO)
ACPI: XSDT 0000000099383080 00007C (v01 LENOVO TC-03    00001000 AMI  00010013)
ACPI: FACP 000000009938daf0 00010C (v05 LENOVO TC-03    00001000 AMI  00010013)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20131218/tbfadt-603)
ACPI: DSDT 0000000099383188 00A966 (v02 LENOVO TC-03    00001000 INTL 20120913)
ACPI: FACS 00000000995a7f80 000040
ACPI: APIC 000000009938dc00 000072 (v03 LENOVO TC-03    00001000 AMI  00010013)
ACPI: FPDT 000000009938dc78 000044 (v01 LENOVO TC-03    00001000 AMI  00010013)
ACPI: MCFG 000000009938dcc0 00003C (v01 LENOVO TC-03    00001000 MSFT 00000097)
ACPI: LPIT 000000009938dd00 000104 (v01 LENOVO TC-03    00001000 VLV2 0100000D)
ACPI: MSDM 000000009938de08 000055 (v03 LENOVO TC-03    00001000 AMI  00010013)
ACPI: HPET 000000009938de60 000038 (v01 LENOVO TC-03    00001000 AMI. 00000005)
ACPI: SSDT 000000009938de98 000763 (v01 LENOVO TC-03    00001000 INTL 20061109)
ACPI: SSDT 000000009938e600 000290 (v01 LENOVO TC-03    00001000 INTL 20061109)
ACPI: SSDT 000000009938e890 00017A (v01 LENOVO TC-03    00001000 INTL 20061109)
ACPI: UEFI 000000009938ea10 000042 (v01 LENOVO TC-03    00001000      00000000)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff88015b600000-ffff88015effffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x15fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0008bfff]
  node   0: [mem 0x00100000-0x9934efff]
  node   0: [mem 0x100000000-0x15fffffff]
On node 0 totalpages: 1020634
  DMA zone: 56 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3979 pages, LIFO batch:0
  DMA32 zone: 8524 pages used for memmap
  DMA32 zone: 623439 pages, LIFO batch:31
  Normal zone: 5376 pages used for memmap
  Normal zone: 393216 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 103
PM: Registered nosave memory: [mem 0x0008c000-0x0008cfff]
PM: Registered nosave memory: [mem 0x0008d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x9934f000-0x9937efff]
PM: Registered nosave memory: [mem 0x9937f000-0x9938efff]
PM: Registered nosave memory: [mem 0x9938f000-0x998a9fff]
PM: Registered nosave memory: [mem 0x998aa000-0x99ffffff]
PM: Registered nosave memory: [mem 0x9a000000-0x9affffff]
PM: Registered nosave memory: [mem 0x9b000000-0x9effffff]
PM: Registered nosave memory: [mem 0x9f000000-0xe00f7fff]
PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
PM: Registered nosave memory: [mem 0xfed02000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0x9f000000-0xe00f7fff] available for PCI devices
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff88015fc00000 s74176 r8192 d24128 u524288
pcpu-alloc: s74176 r8192 d24128 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1006657
Kernel command line: auto BOOT_IMAGE=Linux-3.14.34 ro root=801 root=/dev/sda1 rootfstype=ext4
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Memory: 3942060K/4082536K available (3898K kernel code, 481K rwdata, 1556K rodata, 832K init, 756K bss, 140476K reserved)
Hierarchical RCU implementation.
	CONFIG_RCU_FANOUT set to non-default value of 32
NR_IRQS:4352 nr_irqs:1024 16
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Maximum core-clock to bus-clock ratio: 0x1d
Resolved frequency ID: 0, frequency: 83200 KHz
TSC runs at 2412800 KHz
lapic_timer_frequency = 83200
tsc: Detected 2412.800 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4825.60 BogoMIPS (lpj=2412800)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20131218
ACPI: All ACPI Tables successfully acquired
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 20K (ffffffff8174a000 - ffffffff8174f000)
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: Intel(R) Pentium(R) CPU  J2900  @ 2.41GHz (fam: 06, model: 37, stepping: 08)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000ffffffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19302.40 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x9938f000-0x998a9fff] (5353472 bytes)
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: SSDT 0000000099378598 000506 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 000506 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 0000000099377918 000433 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 000433 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT 0000000099379e18 00015F (v01  PmRef    ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00015F (v01  PmRef    ApIst 00003000 INTL 20061109)
ACPI: SSDT 000000009937af18 00008D (v01  PmRef    ApCst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00008D (v01  PmRef    ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [PLPE] (on)
ACPI: Power Resource [PLPE] (on)
ACPI: Power Resource [FN00] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x006f]
pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0xa0000000-0xb0716fff]
pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff]
pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff pref]
pci 0000:00:02.0: reg 0x20: [io  0xf080-0xf087]
pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
pci 0000:00:13.0: reg 0x10: [io  0xf070-0xf077]
pci 0000:00:13.0: reg 0x14: [io  0xf060-0xf063]
pci 0000:00:13.0: reg 0x18: [io  0xf050-0xf057]
pci 0000:00:13.0: reg 0x1c: [io  0xf040-0xf043]
pci 0000:00:13.0: reg 0x20: [io  0xf020-0xf03f]
pci 0000:00:13.0: reg 0x24: [mem 0xb0716000-0xb07167ff]
pci 0000:00:13.0: PME# supported from D3hot
pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb0700000-0xb070ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0xb0500000-0xb05fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0xb0400000-0xb04fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xb0710000-0xb0713fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xb0714000-0xb071401f]
pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xb0604000-0xb0604fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xb0600000-0xb0603fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.2:   bridge window [mem 0xb0600000-0xb06fffff]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 3F
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008c800-0x0008ffff]
e820: reserve RAM buffer [mem 0x9934f000-0x9bffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
system 00:03: [io  0x0680-0x069f] has been reserved
system 00:03: [io  0x0400-0x047f] has been reserved
system 00:03: [io  0x0500-0x05fe] has been reserved
system 00:03: [io  0x0600-0x061f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io  0x0a00-0x0a1f] has been reserved
system 00:04: [io  0x0a20-0x0a2f] has been reserved
system 00:04: [io  0x0a30-0x0a3f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:08: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:08: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:08: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:08: [mem 0xfed04000-0xfed04fff] has been reserved
system 00:08: [mem 0xfed0c000-0xfed0ffff] has been reserved
system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:08: [mem 0xfef00000-0xfeffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.3: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 8: can't assign mem (size 0x200000)
pci 0000:00:1c.0: BAR 9: can't assign mem pref (size 0x200000)
pci 0000:00:1c.2: BAR 9: can't assign mem pref (size 0x200000)
pci 0000:00:1c.3: BAR 8: can't assign mem (size 0x200000)
pci 0000:00:1c.3: BAR 9: can't assign mem pref (size 0x200000)
pci 0000:00:1c.0: BAR 7: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.3: BAR 7: assigned [io  0x2000-0x2fff]
pci 0000:00:1c.3: BAR 8: can't assign mem (size 0x200000)
pci 0000:00:1c.3: BAR 9: can't assign mem pref (size 0x200000)
pci 0000:00:1c.2: BAR 9: can't assign mem pref (size 0x200000)
pci 0000:00:1c.0: BAR 8: can't assign mem (size 0x200000)
pci 0000:00:1c.0: BAR 9: can't assign mem pref (size 0x200000)
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.2:   bridge window [mem 0xb0600000-0xb06fffff]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
pci_bus 0000:00: resource 4 [io  0x0000-0x006f]
pci_bus 0000:00: resource 5 [io  0x0078-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: resource 10 [mem 0xa0000000-0xb0716fff]
pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xb0600000-0xb06fffff]
pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x9534f000-0x9934f000] (64MB) mapped at [ffff88009534f000-ffff88009934efff]
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1425471740.208:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7699
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (27 C)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:13.0: version 3.0
ahci 0000:00:13.0: irq 103 for MSI/MSI-X
ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso sadm sds 
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m2048@0xb0716000 port 0xb0716100 irq 103
ata2: SATA max UDMA/133 abar m2048@0xb0716000 port 0xb0716180 irq 103
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
TCP: veno registered
NET: Registered protocol family 17
registered taskstats version 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
PM: Hibernation image not present or could not be loaded.
ALSA device list:
  No soundcards found.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: MATSHITA DVD-RAM SW840, V801, max UDMA/100
ata2.00: configured for UDMA/100
ata1.00: HPA detected: current 312579695, native 312581808
ata1.00: ATA-7: ST3160212AS, 3.AAE, max UDMA/133
ata1.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
tsc: Refined TSC clocksource calibration: 2416.666 MHz
Switched to clocksource tsc
floppy0: no floppy controllers found
scsi 0:0:0:0: Direct-Access     ATA      ST3160212AS      3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM SW840    V801 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
 sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 832K (ffffffff8167a000 - ffffffff8174a000)
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 184K (ffff8800013d2000 - ffff880001400000)
Freeing unused kernel memory: 492K (ffff880001585000 - ffff880001600000)
random: nonblocking pool is initialized
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
input: PC Speaker as /devices/platform/pcspkr/input/input6
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: irq 104 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000008000, b8:ae:ed:26:80:bb, XID 0c000880 IRQ 104
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
snd_hda_intel 0000:00:1b.0: irq 105 for MSI/MSI-X
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input7
mousedev: PS/2 mouse device common for all mice
Adding 1365488k swap on /dev/sda5.  Priority:-1 extents:1 across:1365488k 
EXT4-fs (sda1): re-mounted. Opts: (null)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
st: Version 20101219, fixed bufsize 32768, s/g segs 256
softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
loop: module loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
usbcore: registered new interface driver usb-storage
8139too: 8139too Fast Ethernet driver 0.9.28
[drm] Memory usable by graphics device = 2048M
i915 0000:00:02.0: irq 106 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
acpi device:0a: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
it87: Found IT8728F chip at 0xa30, revision 0
it87: Beeping is supported
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
[drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
r8169 0000:02:00.0: Direct firmware load failed with error -2
r8169 0000:02:00.0: Falling back to user helper
r8169 0000:02:00.0 eth1: unable to load firmware patch rtl_nic/rtl8168g-2.fw (-2)
r8169 0000:02:00.0 eth1: link down
r8169 0000:02:00.0 eth1: link down
r8169 0000:02:00.0 eth1: link up
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.22)
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
device eth1 entered promiscuous mode
lp: driver loaded but no devices found
colord-sane[3677]: segfault at 0 ip 00007f20a859c464 sp 00007fffc5824920 error 4 in libc-2.13.so[7f20a84f5000+181000]