Initializing cgroup subsys cpuset Linux version 2.6.26-rc7 (me@machine) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #6 SMP Thu Jul 10 17:22:36 CEST 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d400 (usable) BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffec180 (usable) BIOS-e820: 000000003ffec180 - 000000003fff0000 (ACPI data) BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at [c009d540] 0009d540 Entering add_active_range(0, 0, 262124) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 262124 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 262124 On node 0 totalpages: 262124 DMA zone: 36 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4060 pages, LIFO batch:0 Normal zone: 1980 pages used for memmap Normal zone: 223300 pages, LIFO batch:31 HighMem zone: 288 pages used for memmap HighMem zone: 32460 pages, LIFO batch:7 Movable zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP 000FDFC0, 0014 (r0 IBM ) ACPI: RSDT 3FFEFF80, 0030 (r1 IBM SERONYXP 1000 IBM 45444F43) ACPI: FACP 3FFEFF00, 0074 (r1 IBM SERONYXP 1000 IBM 45444F43) ACPI: DSDT 3FFEC180, 3BB6 (r1 IBM SERTURQU 1000 MSFT 100000B) ACPI: FACS 3FFEFE40, 0040 ACPI: APIC 3FFEFE80, 0076 (r1 IBM SERONYXP 1000 IBM 45444F43) ACPI: ASF! 3FFEFDC0, 004B (r16 IBM SERONYXP 1 IBM 45444F43) ACPI: PM-Timer IO Port: 0x488 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, GSI 0-15 ACPI: IOAPIC (id[0x0d] address[0xfec01000] gsi_base[16]) IOAPIC[1]: apic_id 13, version 17, address 0xfec01000, GSI 16-31 ACPI: IOAPIC (id[0x0c] address[0xfec02000] gsi_base[32]) IOAPIC[2]: apic_id 12, version 17, address 0xfec02000, GSI 32-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ3 used by override. Enabling APIC mode: Flat. Using 3 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 37928 bytes of per cpu data NR_CPUS: 8, nr_cpu_ids: 2 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259820 Kernel command line: root=/dev/md0 ro rootdelay=7 mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) mapped IOAPIC to ffff9000 (fec01000) mapped IOAPIC to ffff8000 (fec02000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2392.328 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1029532k/1048496k available (1698k kernel code, 18216k reserved, 731k data, 216k init, 130992k highmem) virtual kernel memory layout: fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0367000 - 0xc039d000 ( 216 kB) .data : 0xc02a890d - 0xc035f540 ( 731 kB) .text : 0xc0100000 - 0xc02a890d (1698 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay using timer specific routine.. 4789.89 BogoMIPS (lpj=9579797) Security Framework initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 Initializing cgroup subsys debug Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Hyper-Threading is disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Checking 'hlt' instruction... OK. ACPI: Core revision 20080321 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07 Booting processor 1/6 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4784.84 BogoMIPS (lpj=9569691) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Hyper-Threading is disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (9574.74 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 groups: 1 0 net_namespace: 644 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd80c, last bus=2 PCI: Using configuration type 1 for base access Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Root Bridge [PCI1] (0000:01) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] ACPI: PCI Root Bridge [PCI2] (0000:02) ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT] _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP00] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP01] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP02] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP03] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP04] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled. _PRS AML buffer: 23 00 02 18 79 00 _CRS AML buffer: 23 00 02 18 79 00 ACPI: PCI Interrupt Link [LP06] (IRQs *9) _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP07] (IRQs) *0, disabled. _PRS AML buffer: 23 00 04 18 79 00 _CRS AML buffer: 23 00 04 18 79 00 ACPI: PCI Interrupt Link [LP08] (IRQs *10) _PRS AML buffer: 23 00 08 18 79 00 _CRS AML buffer: 23 00 08 18 79 00 ACPI: PCI Interrupt Link [LP09] (IRQs *11) _PRS AML buffer: 23 00 04 18 79 00 _CRS AML buffer: 23 00 04 18 79 00 ACPI: PCI Interrupt Link [LP0A] (IRQs *10) _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP0B] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP0C] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP0D] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP0E] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP0F] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP10] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP11] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP12] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP13] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP14] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP15] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP16] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP17] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP18] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP19] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP1A] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP1B] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP1C] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP1D] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP1E] (IRQs) *0, disabled. _PRS AML buffer: 23 00 00 18 79 00 ACPI: No IRQs in resource ACPI: Resource type 0x7 is not an IRQ entry _CRS AML buffer: 23 00 00 18 79 00 ACPI: PCI Interrupt Link [LP1F] (IRQs) *0, disabled. _PRS AML buffer: 23 00 08 18 79 00 _CRS AML buffer: 23 00 08 18 79 00 ACPI: PCI Interrupt Link [LPUS] (IRQs *11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered _CRS AML buffer: 88 0d 00 01 0c 00 00 00 c0 03 df 03 00 00 20 00 88 0d 00 01 0c 00 00 00 b0 03 bb 03 00 00 0c 00 87 17 00 00 0c 01 00 00 00 00 00 00 0a 00 ff ff 0b 00 00 00 00 00 00 00 02 00 88 0d 00 02 0c 00 00 00 00 00 00 00 00 00 01 00 87 17 00 00 0c 01 00 00 00 00 00 00 00 fc ff ff ff ff 00 00 00 00 00 00 00 04 88 0d 00 01 0c 00 00 00 e0 03 ff 22 00 00 20 1f 88 0d 00 01 0c 00 00 00 bc 03 bf 03 00 00 04 00 88 0d 00 01 0c 00 00 00 00 00 af 03 00 00 b0 03 79 00 _CRS AML buffer: 47 01 10 05 10 05 00 08 47 01 04 05 04 05 00 04 47 01 00 05 00 05 00 04 47 01 20 04 20 04 00 08 47 01 60 04 60 04 00 02 47 01 2e 00 2e 00 00 02 79 00 _CRS AML buffer: 22 02 00 47 01 64 00 64 00 00 01 47 01 60 00 60 00 00 01 79 00 _CRS AML buffer: 22 00 10 79 00 _CRS AML buffer: 2a 04 00 22 40 00 47 01 f0 03 f0 03 00 06 79 00 _PRS AML buffer: 2a 04 00 22 40 00 47 01 f0 03 f0 03 00 06 79 00 _CRS AML buffer: 22 10 00 47 01 f8 03 f8 03 01 08 79 00 _PRS AML buffer: 22 10 00 47 01 f8 03 f8 03 01 08 79 00 _CRS AML buffer: 47 01 20 00 20 00 01 02 47 01 a0 00 a0 00 01 02 79 00 _CRS AML buffer: 2a 10 00 47 01 00 00 00 00 01 20 47 01 80 00 80 00 01 10 47 01 c0 00 c0 00 01 20 79 00 _CRS AML buffer: 47 01 70 00 70 00 01 04 22 00 01 79 00 _CRS AML buffer: 47 01 61 00 61 00 01 01 79 00 _CRS AML buffer: 47 01 f0 00 f0 00 01 10 22 00 20 79 00 _CRS AML buffer: 47 01 92 00 92 00 01 01 47 01 eb 00 eb 00 01 02 47 01 ec 01 ec 01 01 04 47 01 00 04 00 04 01 ff 47 01 00 06 00 06 01 01 47 01 00 08 00 08 01 10 47 01 00 0c 00 0c 01 ff 47 01 50 0f 50 0f 01 09 86 09 00 01 00 00 c0 fe 00 00 40 01 79 00 _CRS AML buffer: 88 0d 00 02 0c 00 00 00 01 00 01 00 00 00 01 00 87 17 00 00 0c 01 00 00 00 00 00 00 00 fa ff ff ff fb 00 00 00 00 00 00 00 02 88 0d 00 01 0c 00 00 00 00 23 ff 23 00 00 00 01 79 00 _CRS AML buffer: 88 0d 00 02 0c 00 00 00 02 00 02 00 00 00 01 00 87 17 00 00 0c 01 00 00 00 00 00 00 00 f8 ff ff ff f9 00 00 00 00 00 00 00 02 88 0d 00 01 0c 00 00 00 00 24 ff ff 00 00 00 dc 79 00 pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing NET: Registered protocol family 8 NET: Registered protocol family 20 system 00:01: ioport range 0x510-0x517 has been reserved system 00:01: ioport range 0x504-0x507 has been reserved system 00:01: ioport range 0x500-0x503 has been reserved system 00:01: ioport range 0x420-0x427 has been reserved system 00:01: ioport range 0x460-0x461 has been reserved system 00:0b: ioport range 0x1ec-0x1ef has been reserved system 00:0b: ioport range 0x400-0x4fe could not be reserved system 00:0b: ioport range 0x600-0x600 has been reserved system 00:0b: ioport range 0x800-0x80f has been reserved system 00:0b: ioport range 0xc00-0xcfe could not be reserved system 00:0b: ioport range 0xf50-0xf58 has been reserved system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 Freeing initrd memory: 5058k freed audit: initializing netlink socket (disabled) type=2000 audit(1215708618.912:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1765 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:01.0: Boot video device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x64,0x60 irq 1,12 PNP: PS/2 controller has invalid data port 0x64; using default 0x60 PNP: PS/2 controller has invalid command port 0x60; using default 0x64 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP bic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 216k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: ACPI0007:01 is registered as cooling_device1 Uniform Multi-Platform E-IDE driver ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx usbcore: registered new interface driver usbfs SvrWks CSB5: IDE controller (0x1166:0x0212 rev 0x93) at PCI slot 0000:00:0f.1 usbcore: registered new interface driver hub SvrWks CSB5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x0700-0x0707 ide1: BM-DMA at 0x0708-0x070f Probing IDE interface ide0... usbcore: registered new device driver usb SCSI subsystem initialized Fusion MPT base driver 3.04.06 Copyright (c) 1999-2007 LSI Corporation Fusion MPT SPI Host driver 3.04.06 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver Probing IDE interface ide1... hdc: LG CD-ROM CRN-8245B, ATAPI CD/DVD-ROM drive hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 _CRS AML buffer: 23 00 08 18 79 00 ACPI: PCI Interrupt Link [LPUS] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LPUS] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:0f.2: OHCI Host Controller ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:0f.2: irq 11, io mem 0xfebfe000 No dock devices found. libata version 3.00 loaded. usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected tg3.c:v3.92.1 (June 9, 2008) ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 24 (level, low) -> IRQ 24 ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 22 mptbase: ioc0: Initiating bringup eth0: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000Base-T Ethernet 00:09:6b:49:0f:8e eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[769c4000] dma_mask[64-bit] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 25 (level, low) -> IRQ 25 eth1: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000Base-T Ethernet 00:09:6b:49:0f:8f eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[769c4000] dma_mask[64-bit] ioc0: LSI53C1030 B2: Capabilities={Initiator} scsi0 : ioc0: LSI53C1030 B2, FwRev=01000e00h, Ports=1, MaxQ=222, IRQ=22 hdc: ATAPI 24X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.20 scsi 0:0:0:0: Direct-Access IBM-ESXS ST336607LC F B258 PQ: 0 ANSI: 3 target0:0:0: Beginning Domain Validation target0:0:0: Ending Domain Validation target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63) scsi 0:0:1:0: Direct-Access IBM-ESXS ST336607LC F B258 PQ: 0 ANSI: 3 target0:0:1: Beginning Domain Validation target0:0:1: Ending Domain Validation target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63) scsi 0:0:8:0: Processor IBM 25P3495a S320 1 1 PQ: 0 ANSI: 2 target0:0:8: Beginning Domain Validation target0:0:8: Ending Domain Validation target0:0:8: asynchronous Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 71096640 512-byte hardware sectors (36401 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: b3 00 10 08 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA sd 0:0:0:0: [sda] 71096640 512-byte hardware sectors (36401 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: b3 00 10 08 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA sda: sda1 < sda5 sda6 > sda2 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:1:0: [sdb] 71096640 512-byte hardware sectors (36401 MB) sd 0:0:1:0: [sdb] Write Protect is off sd 0:0:1:0: [sdb] Mode Sense: b3 00 10 08 sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA sd 0:0:1:0: [sdb] 71096640 512-byte hardware sectors (36401 MB) sd 0:0:1:0: [sdb] Write Protect is off sd 0:0:1:0: [sdb] Mode Sense: b3 00 10 08 sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA sdb: sdb1 < sdb5 > sd 0:0:1:0: [sdb] Attached SCSI disk ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide_generic: I/O resource 0x1F0-0x1F7 not free. ide_generic: I/O resource 0x170-0x177 not free. md: raid0 personality registered for level 0 md: md0 stopped. md: bind md: bind md0: setting max_sectors to 128, segment boundary to 32767 raid0: looking at sda5 raid0: comparing sda5(33198208) with sda5(33198208) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at sdb5 raid0: comparing sdb5(33198208) with sda5(33198208) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 66396416 blocks. raid0 : conf->hash_spacing is 66396416 blocks. raid0 : nb_zone is 1. raid0 : Allocating 4 bytes for hash. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:1:0: Attached scsi generic sg1 type 0 scsi 0:0:8:0: Attached scsi generic sg2 type 3 Linux agpgart interface v0.103 input: Power Button (FF) as /class/input/input1 ACPI: Power Button (FF) [PWRF] piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device Floppy drive(s): fd0 is 1.44M input: PC Speaker as /class/input/input2 FDC 0 is a National Semiconductor PC87306 input: ImExPS/2 Generic Explorer Mouse as /class/input/input3 Adding 1951856k swap on /dev/sda6. Priority:-1 extents:1 across:1951856k EXT3 FS on md0, internal journal loop: module loaded device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. ip_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready RPC: Registered udp transport module. RPC: Registered tcp transport module. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period eth0: no IPv6 routers present